The origin of the Maozu carbonate-hosted Pb–Zn deposit,southwest China: Constrained by C–O–S–Pb isotopic compositions and Sm–Nd isotopic age

The Maozu Pb–Zn deposit, located on the western margin of the Yangtze Block, southwest China, is a typical carbonate-hosted deposit in the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic province with Pb + Zn reserves of about 2.0 million tonnes grading 4.15 wt.% Pb and 7.25 wt.% Zn. Its ore bodies are hosted in Sinian (635–541 Ma) Dengying Formation dolostone and show stratiform, vein and irregular textures. Ores are composed of sphalerite, galena, pyrite, calcite, dolomite, quartz and fluorite with massive, banded, disseminated and veined structures. The C–O–Sm–Nd isotopic compositions of hydrothermal calcites and S–Pb isotopic compositions of sulfides were analyzed to constrain the origin of the Maozu deposit. δ¹³C_PDB and δ¹⁸O_SMOW values of hydrothermal calcites range from −3.7‰ to −2.0‰ and +13.8‰ to +17.5‰, respectively, and plot near the marine carbonate rocks field in a plot of δ¹³C_PDB vs. δ¹⁸O_SMOW, with a negative correlation. It suggests that CO₂ in the hydrothermal fluids was mainly originated from marine carbonate rocks, with limited influence from sedimentary organic matter. δ³⁴S_CDT values of sulfides range from +9.9‰ to +19.2‰, similar to that of Cambrian to Triassic seawater sulfate (+15‰ to +35‰) and evaporate (+15‰ to +30‰) in the Cambrian to Triassic sedimentary strata. It suggests that reduced sulfur was derived from evaporate in sedimentary strata by thermo chemical sulfate reduction. Sulfides have low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.129–18.375, ²⁰⁷Pb/²⁰⁴Pb = 15.640–15.686 and ²⁰⁸Pb/²⁰⁴Pb = 38.220–38.577) that plot in the field between upper crust and the orogenic belt evolution curve in the plot of ²⁰⁷Pb/²⁰⁴Pb vs. ²⁰⁶Pb/²⁰⁴Pb, and similar to that of age corrected Proterozoic basement rocks (Dongchuan and Kunyang Groups). This indicates that ore-forming metals were mainly derived from basement rocks. Hydrothermal calcite yields a Sm–Nd isotopic age of 196 ± 13 Ma, possibly reflecting the timing of Pb–Zn mineralization in the SYG province, younger than the Permian Emeishan mantle plume (∼260 Ma). All data combined suggests that hydrothermal fluids circulated through basement rocks where they picked up metals and migrated to surface, mixed with reduced sulfur-bearing fluids and precipitated metals. Ore genesis of the Maozu deposit is different from known magmatic–hydrothermal, Sedimentary Exhalative or Mississippi Valley-types, which maybe represent a unique ore deposit type, named as the SYG-type.     

Veracity of Neoproterozoic negative C-isotope values: The termination of the Shuram negative excursion

There is widespread interest in the Neoproterozoic period of the Earth's history (1000 to 542 Ma) because of unprecedented δ¹³C fluctuations to < − 10‰ PDB through thick (> 1000 m) succession of stratigraphically complex sedimentary rocks deposited during tens of millions of years. In contrast, Phanerozoic large negative C-isotope excursions have been interpreted as the result of diagenetic fluid mixing during carbonate stabilization and burial and are less enigmatic due to the excellent biostratigraphic control on their timing and duration.The Ediacaran Nafun Group of Oman (part of the Huqf Supergroup spanning the Cryogenian–Early Cambrian) contains a large δ¹³C negative excursion (the Shuram excursion) reaching values as negative as − 12‰ at the base of the Shuram Formation. A steady recovery to positive values occurs over the entire Shuram and half through the overlying Buah Formation, suggesting a duration on the order of tens of My. Based on trace metal, chemostratigraphic and sedimentological analyses, the carbon isotope record obtained from the Buah Formation of northern Oman indicates a systematic and reproducible shift of δ¹³C values from − 6‰ to + 1‰ in 1 — a demonstrably diagenetic altered carbonate-cemented siliciclastic facies, and 2 — a least diagenetically altered stromatolitic facies. The identical reproducible isotopic pattern in these time-equivalent sections combined to the presence of exceptionally preserved δ¹⁸O values around − 2 to + 1‰ associated with the most negative δ¹³C values rules out isotopic resetting by diagenetic fluids as a mechanism to explain these values.It is concluded that it is possible to retain depositional δ¹³C values in demonstrably diagenetically altered carbonates. This raises the issue of the ability to recognize diagenetic alteration of C-isotopic values in Neoproterozoic rocks where a robust time frame to support reproducibility is not available. The results of this study provide strong support to a non diagenetic origin of the negative Shuram C-isotope excursion, believed to be the most profound (in terms of amplitude and duration) in the Earth's history.     

Stable isotopic signatures of the modern land snail Eremina desertorum from a low-latitude (hot) dry desert—A study from the Petrified Forest,New Cairo,Egypt

This study was conducted on recent desert samples—including (1) soils, (2) plants, (3) the shell, and (4) organic matter from modern specimens of the land snail Eremina desertorum—which were collected at several altitudes (316–360 m above sea level) from a site in the New Cairo Petrified Forest. The soils and shell_{E. desertorum} were analyzed for carbonate composition and isotopic composition (δ¹⁸O, δ¹³C). The plants and organic matter_{E. desertorum} were analyzed for organic carbon content and δ¹³C. The soil carbonate, consisting of calcite plus minor dolomite, has δ¹⁸O values from −3.19 to −1.78‰ and δ¹³C values −1.79 to −0.27‰; covariance between the two values accords with arid climatic conditions. The local plants include C3 and C4 types, with the latter being dominant. Each type has distinctive bulk organic carbon δ¹³C values: −26.51 to −25.36‰ for C3-type, and −13.74 to −12.43‰ for C4-type plants.The carbonate of the shell_{E. desertorum} is composed of aragonite plus minor calcite, with relatively homogenous isotopic compositions (δ¹⁸O_mean = −0.28 ± 0.22‰; δ¹³C_mean = −4.46 ± 0.58‰). Most of the δ¹⁸O values (based on a model for oxygen isotope fractionation in an aragonite-water system) are consistent with evaporated water signatures. The organic matter_{E. desertorum} varies only slightly in bulk organic carbon δ¹³C values (−21.78 ± 1.20‰) and these values suggest that the snail consumed more of C3-type than C4-type plants. The overall offset in δ¹³C values (−17.32‰) observed between shell_{E. desertorum} carbonate and organic matter_{E. desertorum} exceeds the value expected for vegetation input, and implies that 30% of carbon in the shell_{E. desertorum} carbonate comes from the consumption of limestone material.     

Geology,isotope geochemistry and ore genesis of the Shanshulin carbonate-hosted Pb–Zn deposit,southwest China

The Shanshulin Pb–Zn deposit occurs in Upper Carboniferous Huanglong Formation dolomitic limestone and dolostone, and is located in the western Yangtze Block, about 270 km west of Guiyang city in southwest China. Ore bodies occur along high angle thrust faults affiliated to the Weishui regional fault zone and within the northwestern part of the Guanyinshan anticline. Sulfide ores are composed of sphalerite, pyrite, and galena that are accompanied by calcite and subordinate dolomite. Twenty-two ore bodies have been found in the Shanshulin deposit area, with a combined 2.7 million tonnes of sulfide ores grading 0.54 to 8.94 wt.% Pb and 1.09 to 26.64 wt.% Zn. Calcite samples have δ¹³C_PDB and δ¹⁸O_SMOW values ranging from − 3.1 to + 2.5‰ and + 18.8 to + 26.5‰, respectively. These values are higher than mantle and sedimentary organic matter, but are similar to marine carbonate rocks in a δ¹³C_PDB vs. δ¹⁸O_SMOW diagram, suggesting that carbon in the hydrothermal fluid was most likely derived from the carbonate country rocks. The δ³⁴S_CDT values of sphalerite and galena samples range from + 18.9 to + 20.3‰ and + 15.6 to + 17.1‰, respectively. These values suggest that evaporites are the most probable source of sulfur. The δ³⁴S_CDT values of symbiotic sphalerite–galena mineral pairs indicate that deposition of sulfides took place under chemical equilibrium conditions. Calculated temperatures of S isotope thermodynamic equilibrium fractionation based on sphalerite–galena mineral pairs range from 135 to 292 °C, consistent with previous fluid inclusion studies. Temperatures above 100 °C preclude derivation of sulfur through bacterial sulfate reduction (BSR) and suggest that reduced sulfur in the hydrothermal fluid was most likely supplied through thermo-chemical sulfate reduction (TSR). Twelve sphalerite samples have δ⁶⁶Zn values ranging from 0.00 to + 0.55‰ (mean + 0.25‰) relative to the JMC 3-0749L zinc isotope standard. Stages I to III sphalerite samples have δ⁶⁶Zn values ranging from 0.00 to + 0.07‰, + 0.12 to + 0.23‰, and + 0.29 to + 0.55‰, respectively, showing the relatively heavier Zn isotopic compositions in later versus earlier sphalerite. The variations of Zn isotope values are likely due to kinetic Raleigh fractional crystallization. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios of the sulfide samples fall in the range of 18.362 to 18.573, 15.505 to 15.769 and 38.302 to 39.223, respectively. The Pb isotopic ratios of the studied deposit plot in the field that covers the upper crust, orogenic belt and mantle Pb evolution curves and overlaps with the age-corrected Proterozoic folded basement rocks, Devonian to Lower Permian sedimentary rocks and Middle Permian Emeishan flood basalts in a ²⁰⁷Pb/²⁰⁴Pb vs. ²⁰⁶Pb/²⁰⁴Pb diagram. This observation points to the derivation of Pb metal from mixed sources. Sphalerite samples have ⁸⁷Sr/⁸⁶Sr_200 Ma ratios ranging from 0.7107 to 0.7115 similar to the age-corrected Devonian to Lower Permian sedimentary rocks (0.7073 to 0.7111), higher than the age-corrected Middle Permian basalts (0.7039 to 0.7078), and lower than the age-corrected Proterozoic folded basement (0.7243 to 0.7288). Therefore, the Sr isotope data support a mixed source. Studies on the geology and isotope geochemistry suggest that the Shanshulin deposit is a carbonate-hosted, thrust fault-controlled, strata-bound, epigenetic, high grade deposit formed by fluids and metals of mixed origin.     

Geochemical comparison between gas in fluid inclusions and gas produced from the Upper Triassic Xujiahe Formation,Sichuan Basin,SW China

Natural gas in the Xujiahe Formation of the Sichuan Basin is dominated by hydrocarbon (HC) gas, with 78–79% methane and 2–19% C₂₊ HC. Its dryness coefficient (C₁/C_1–5) is mostly < 0.95. The gas in fluid inclusions, which has low contents of CH₄ and heavy hydrocarbons (C₂₊) and higher contents of non-hydrocarbons (e.g. CO₂), is a typical wet gas produced by thermal degradation of kerogen. Gas produced from the Upper Triassic Xujiahe Formation (here denoted field gas) has light carbon isotope values for methane (δ¹³C₁: −45‰ to −36‰) and heavier values for ethane (δ¹³C₂: −30‰ to −25‰). The case is similar for gas in fluid inclusions, but δ¹³C₁ = −36‰ to −45‰ and δ¹³C₂ = −24.8‰ to −28.1‰, suggesting that the gas experienced weak isotopic fractionation due to migration and water washing. The field gas has δ¹³C_CO2 values of −15.6‰ to −5.6‰, while the gas in fluid inclusions has δ¹³C_CO2 values of −16.6‰ to −9‰, indicating its organic origin. Geochemical comparison shows that CO₂ captured in fluid inclusions mainly originated from source rock organic matter, with little contribution from abiogenic CO₂. Fluid inclusions originate in a relatively closed system without fluid exchange with the outside following the gas capture process, so that there is no isotopic fractionation. They thus present the original state of gas generated from the source rocks. These research results can provide a theoretical basis for gas generation, evolution, migration and accumulation in the basin.     

The nappe-hosted Hoshbulak MVT Zn–Pb deposit,Xinjiang, China: A review of the geological,elemental and stable isotopic constraints

The Hoshbulak Zn–Pb deposit is located in South Tianshan, Xinjiang, China. The Zn–Pb orebody is tabular and stratoid in form and it is hosted in calcareous rocks of the Upper Devonian Tan'gaitaer Formation which were thrust over the Carboniferous system. The ores are mineralogically simple and composed mainly of sphalerite, galena, pyrite, calcite, dolomite and exhibit massive, banded, veinlets, colloidal, metasomatic, eutectic, concentric ring and microbial-like fabrics. The Co/Ni ratios of pyrite in the ores range from 0.46 to 0.90 by electron microprobe, which suggested that the Hoshbulak Zn–Pb mineralization was formed in a sedimentary environment. The REE patterns of the hydrothermal calcite coincide well with those of recrystallized micritic limestones, suggesting that the Hoshbulak Pb–Zn mineralization was closely genetically related to limestones of the Tan'gaitaer Formation. The C-, H- and O-isotopic compositions of hydrothermal calcite and dolomite in the ores yield δ¹³C(VPDB) values ranging from − 1.9‰ to + 2.6‰ (mean 0.79‰), δ¹⁸O(VSMOW) values from 22.41‰ to 24.67‰ (mean 23.04‰) and δD values from − 77‰ to − 102‰ for fluid inclusions. It is suggested that the ore-forming fluids, including CO₂, were derived from the calcareous strata of the Tan'gaitaer Formation in association with hydrocarbon brines. The δ³⁴S(VCDT) ranges from − 22.3‰ to − 8.5‰ for early ore-stage sulfides and from 5.9‰ to 24.2‰ with a cluster between 14.4‰ and 24.2‰ for the sulfides (pyrite, sphalerite, galena) in the main ore-stage. The ore sulfur may have been derived from evaporite rocks by thermochemical sulfate reduction (TSR) as the predominant mechanism for H₂S generation. The Pb-isotopic compositions of the sulfide minerals from the Hoshbulak ores yield ²⁰⁶Pb/²⁰⁴Pb ratios from 17.847 to 18.173, ²⁰⁷Pb/²⁰⁴Pb ratios from 15.586 to 15.873 and ²⁰⁸Pb/²⁰⁴Pb ratios from 37.997 to 38.905, which indicate that the metals were sourced mainly from the Tan'gaitaer Formation. We conclude that the genesis of the Hoshbulak Mississippi Valley-type deposit was closely related to thrust faulting in the South Tianshan orogen of China.     

Molecular and stable carbon isotopic compositions of saturated fatty acids within one sedimentary profile in the Shenhu,northern South China Sea: Source implications

This study examined the distributions and stable carbon isotopic compositions of saturated fatty acids (SaFAs) in one 300 cm long sedimentary profile, which was named as Site4B in Shenhu, northern South China Sea. The concentrations of total SaFAs in sediments ranged from 1.80 to 10.16 μg/g (μg FA/g dry sediment) and showed an even-over-odd predominance in the carbon chain of C₁₂ to C₃₂, mostly with n-C₁₆ and n-C₁₈ being the two major components. The short-chain fatty acids (ScFAs; n-C₁₂ to n-C₁₈) mainly from marine microorganisms had average δ¹³C values of −26.7‰ to −28.2‰, whereas some terrigenous-sourced long-chain fatty acids (LcFAs; n-C₂₁ to n-C₃₂) had average δ¹³C values of −29.6‰ to −34.1‰. The other LcFAs (n-C₂₄ & n-C₂₆ ∼ n-C₂₈; average δ¹³C values are −26.1‰ to −28.0‰) as well as n-C₁₉ and n-C₂₀ SaFAs (average δ¹³C values are −29.1‰ and −29.3‰, respectively) showed a mixed signal of carbon isotope compositions.The relative bioproductivity calculation (marine vs. terrigenous) demonstrated that most of organic carbon accumulation throughout the sedimentary profile was contributed by marine organism. The high marine productivity in Shenhu, South China Sea may be related to the hydrocarbon seepage which evidenced by diapiric structures. Interestingly, there is a sever fluctuation of terrigenous inputs around the depth of 97 cm below the seafloor (bsf), probably resulting from the influence of the Dansgaard–Oeschger events and the Younger Dryas event as revealed by ¹⁴C age measurements.     

Geology,geochemistry and genesis of the Qianfanling quartz-vein Mo deposit in Songxian County,Western Henan Province,China

The Qianfanling Mo deposit, located in Songxian County, western Henan province, China, is one of the newly discovered quartz-vein type Mo deposits in the East Qinling–Dabie orogenic belt. The deposit consists of molybdenite in quartz veins and disseminated molybdenite in the wall rocks. The alteration types of the wall rocks include silicification, K-feldspar alteration, pyritization, carbonatization, sericitization, epidotization and chloritization. On the basis of field evidence and petrographic analysis, three stages of hydrothermal mineralization could be distinguished: (1) pyrite–barite–quartz stage; (2) molybdenite–quartz stage; (3) quartz–calcite stage.Two types of fluid inclusions, including CO₂-bearing fluid inclusions and water-rich fluid inclusions, have been recognized in quartz. Homogenization temperatures of fluid inclusions vary from 133 °C to 397 °C. Salinity ranges from 1.57 to 31.61 wt.% NaCl eq. There are a large number of daughter mineral-CO₂-bearing inclusions, which is the result of fluid immiscibility. The ore-forming fluids are medium–high temperature, low to moderate salinity H₂O–NaCl–CO₂ system. The δ³⁴S values of pyrite, molybdenite, and barite range from − 9.3‰ to − 7.3‰, − 9.7‰ to − 7.3‰ and 5.9‰ to 6.8‰, respectively. The δ¹⁸O values of quartz range from 9.8‰ to 11.1‰, with corresponding δ¹⁸O_fluid values of 1.3‰ to 4.3‰, and δ¹⁸D values of fluid inclusions of between − 81‰ and − 64‰. The δ¹³C_V-PDB values of fluid inclusions in quartz and calcite have ranges of − 6.7‰ to − 2.9‰ and − 5.7‰ to − 1.8‰, respectively. Sulfur, hydrogen, oxygen and carbon isotope compositions show that the sulfur and ore-forming fluids derived from a deep-seated igneous source. During the peak collisional period between the North China Craton and the Yangtze Craton, the ore-forming fluids that derived from a deep igneous source extracted base and precious metals and flowed upwards through the channels that formed during tectonism. Fluid immiscibility and volatile exsolution led to the crystallization of molybdenite and other minerals, and the formation of economic orebodies in the Qianfanling Mo deposit.     

Geology and isotope geochemistry (C–O–S) of the Diyadin gold deposit,Eastern Turkey: A newly-discovered Carlin-like deposit

Diyadin mineralization is the first reported gold deposit located in a collisional tectonic environment in Eastern Anatolia. The mineralization is related to N–S and N10–20°W-trending fault systems and hosted within the Paleozoic metamorphic basement rocks of the Anatolide–Toride microcontinent. Calc-schist, dolomitic marble and Miocene and Quaternary volcanic rocks comprise the exposed units in the mineralized area. Geochemical signatures, alteration types and host rock characteristics of the Diyadin gold deposit resemble those of Carlin-type deposits. Mineralization is constrained by alteration of overlying volcanic rocks to younger than ~ 14 Ma (K–Ar).Carbon and oxygen stable isotope measurements of carbonate rocks were made on six drill holes (n = 81) with an additional four samples of fresh carbonate rocks from surface outcrops. Background carbonate rocks have δ¹³C_V-PDB ~ 1.8‰ and δ¹⁸O_V-SMOW ~ 27‰. Isotopically-altered host rock samples have decreased δ¹⁸O (down to ~+11.4‰) and variable δ¹³C (from − 3.6 to + 4.8‰). Postore carbonate veins and cave-fill material have distinctly different isotopic signatures, particularly carbon (from δ¹³C = + 8.4 to + 9.8‰). Whether this post-ore carbonate is simply very late in mineralization associated with the gold system, or is a completely different, younger system utilizing the same pathways, is unclear at present. Within the host rock sample set, there is no correlation between gold and δ¹³C, and a weak correlation between gold and δ¹⁸O, indicative of water–rock interaction and isotopic alteration. Both the isotopic data and structural mapping suggest that the main upflow zone for the deposit is near the northern portion of the drill fence. Additional data at multiple scales are required to clarify the relationship(s) between fluid flow and mineralization.     

Isotope (C and O) composition of auriferous quartz carbonate veins,central lode system,Gadag Gold Field,Dharwar Craton,India: Implications to source of ore fluids

Carbon (δ¹³C_PDB) and oxygen (δ¹⁸O_SMOW) isotopic compositions of auriferous quartz-carbonate veins (QCVs) of gold deposits from Sangli, Kabuliyatkatti, Nagavi, Nabapur and Mysore mining areas developed on the Central Lode system of the Gadag Gold Field (GGF) in the Neoarchaean Gadag schist belt of the Dharwar Craton, southern India have been examined for the first time to understand the origin of the mineralising fluids. In majority of the samples (46 out of 49), δ¹³C_pdb of carbonates of the QCVs fall in the range from − 2.2‰ to − 9.7‰ and the δ¹⁸O values range from 12.0‰ to 30.5‰ SMOW. The calculated fluid δ¹³C_∑ C compositions for these deposits range from − 2.1‰ to − 9.6‰ and δ¹⁸O_H2O from 6.8‰ to 25.9‰, respectively. Carbonate δ¹³C and fluid δ¹³C_∑ C compositions of the carbonates of the QCVs of the GGF are not only distinct from the carbon isotope range of marine carbonates or meta-sedimentary carbonates of the Chitradurga schist belt, but are consistent with C-isotope values of magmatic (− 5 ± 3‰, Burrows et al., 1986) and/or mantle (− 6 ± 2‰, Ohmoto, 1986) carbonates. As dissolution/decarbonation reactions during metamorphism of pre-existing carbonate/carbonated rocks produce CO₂ with δ¹³C values similar to or more enriched than parent rock, the carbonate or fluid δ¹³C ratios of the QCVs (which fall in the compositional range of mantle/magmatic derived CO₂ or carbonates) obtained in this work cannot be the result of metamorphism. The present study corroborates our previous reports from Ajjanahalli and G.R. Halli gold deposits (Sarangi et al., 2012) occurring in the vicinity of the southern extension of the same crustal scale shear zone on which all the GGF deposits are located.The age of gold mineralisation in this area has been reported to be 2522 ± 6 Ma by Sarma et al., 2011. Chardon et al. (2011) have proposed large-scale remobilization of the older gneissic basement, as well as, emplacement of juvenile granites between 2559 Ma and 2507 Ma, close to the crustal scale shear zone along the eastern margin of the Chitradurga schist belt. Based on these observations and our isotope studies, it is proposed that gold mineralising fluids were derived from mantle/juvenile magmatic melts and were channelled through crustal scale shear zones to give rise to the gold deposits in the GGF.     

Late Pleistocene vegetation change in Korea and its possible link to East Asian monsoon and Dansgaard–Oeschger (D–O) cycles

Late Pleistocene carbon isotope (δ¹³C) records from a paleolithic sedimentary sequence collected from Baeki, Hongcheon, central Korea, show long-term changes with superimposed short-term isotopic excursions. The δ¹³C value of the sedimentary organic matter, a proxy for past vegetation change, varied from ? 26‰ to ? 23‰ for the period between 30 and 90 ka, with a long-term variation similar to insolation changes. High-amplitude (? 1‰ to approximately ? 1.5‰) fluctuations superimposed on the long-term changes in the δ¹³C values decreased during stronger summer monsoon intervals but increased during the weakened summer monsoon. This millennial-scale pattern is generally similar to Greenland Dansgaard–Oeschger (D–O) cycles. The possible connection between the Hongcheon area, Korea and high latitudes may be explained by atmospheric circulation changing in response to the D–O oscillations in the Northern Hemisphere.     

Nanhuan manganese deposits within restricted basins of the southeastern Yangtze Platform,China: Constraints from geological and geochemical evidence

The Nanhuan manganese deposits in the southeastern Yangtze Platform occur in the black shale series in the lower part of the Datangpo Formation. In order to constrain the genesis of the deposits, a detailed study was undertaken that involved field observations, major and trace element analyses, organic carbon analyses, and isotope analyses (C, O, S). The major findings are as follows. (1) The ore-bearing rock series, morphology of the ore bodies, and characteristics of ores in several deposits are similar. The ore minerals are rhodochrosite and manganocalcite. The gangue minerals are mainly quartz, feldspar, dolomite, and illite. Minor apatite and bastnaesite occur in the manganese ores. (2) The ores are enriched in Ca and Mg, whereas they are depleted in Si, Al, K, and Ti compared to wall rocks. The ores normalized to average Post-Archean Australian shale (PAAS) are enriched in Co, Mo, and Sr. The chondrite-normalized rare earth element (REE) patterns for ores and wall rocks are between those of typical hydrogenous and hydrothermal type manganese deposits. Additionally, the ores have positive Ce anomalies with an average Ce/Ce* of 1.23 and positive Eu anomalies with an average Eu/Eu* of 1.18 (normalized to PAAS). (3) The average content of organic carbon is 2.21% in the samples, and the average organic carbon isotopic value (δ¹³C_V-PDB) is − 33.44‰. The average inorganic carbon isotopic value (δ¹³C_V-PDB) of carbonates in Gucheng is − 3.07‰, while the values are similar in the other deposits with an average of − 8.36‰. The oxygen isotopic compositions (δ¹⁸O_V-PDB) are similar in different deposits with an average of − 7.72‰. (4) The sulfur isotopic values (δ³⁴S_V-CDT) of pyrite are very high and range from + 37.9‰ to + 62.6‰ (average of 52.7‰), which suggests that the pyrite was formed in restricted basins where sulfate replenishment was limited. The sulfate concentrations in the restricted basins were extremely low and enriched in δ³⁴S, which resulted in the very high δ³⁴S values for the pyrite that formed in the manganese deposits. Therefore, a terrigenous weathering origin for manganese can be excluded; otherwise, the sulfate would have been introduced into the basins together with terrigenous manganese, which would have decreased the δ³⁴S values of pyrites. The manganese, which originated from hydrothermal processes, was enriched in the restricted and anoxic basins, and then, it was oxidized to manganese oxyhydroxide in the overlying oxic waters whereby the products precipitated into the sediments. The manganese oxyhydroxide in the sediment was then reduced to Mn^2 + and released to the pore waters during the process of diagenesis. Some organic carbon was oxidized to CO₃^2 −, which made the depletion of ¹³C in manganese carbonates. Therefore, we suggest that the Nanhuan manganese deposits are hydrothermal–sedimentary/diagenetic type deposits.     

Boron,sulphur and copper isotope systematics in the orogenic gold deposits of the Archaean Hattu schist belt,eastern Finland

The Hattu schist belt is located in the western part of the Archaean Karelian domain of the Fennoscandian Shield. The orogenic gold deposits with Au–Bi–Te geochemical signatures are hosted by NE–SW, N–S and NW–SE oriented shear zones that deform 2.76–2.73 Ga volcanic and sedimentary sequences, as well as 2.75–2.72 Ga tonalite–granodiorite intrusions and diverse felsic porphyry dykes. Mo–W mineralization is also present in some tonalite intrusions, both separate from, and associated with Au mineralization. Somewhat younger, unmineralized leucogranite intrusions (2.70 Ga) also intrude the belt. Lower amphibolite facies peak metamorphism at 3–5 kbar pressures and at 500–600 °C temperatures affected the belt at around 2.70 Ga and post-date hydrothermal alteration and ore formation. In this study, we investigated the potential influence of magmatic-hydrothermal processes on the formation of orogenic gold deposits on the basis of multiple stable isotope (B, S, Cu) studies of tourmaline and sulphide minerals by application of in situ SIMS and LA ICP MS analytical techniques.Crystal chemistry of tourmaline from a Mo–W mineralization hosted by a tonalite intrusion in the Hattu schist belt is characterized by Fe^3 +–Al^3 +-substitution indicating relatively oxidizing conditions of hydrothermal processes. The range of δ¹¹B data for this kind of tourmaline is from − 17.2‰ to − 12.2‰. The hydrothermal tourmaline from felsic porphyry dyke swith gold mineralization has similar crystal chemistry (e.g. dravite–povondraite compositional trend with Fe^3 +–Al^3 + substitution) and δ¹¹B values between − 19.0‰ and − 9.6‰. The uvite–foitite compositional trend and δ¹¹B ‰ values between − 24.1% and − 13.6% characterize metasomatic–hydrothermal tourmaline from the metasediment-hosted gold deposits. Composition of hydrothermal vein-filling and disseminated tourmaline from the gold-bearing shear zones in metavolcanic rocks is transitional between the felsic intrusion and metasedimentary rock hosted hydrothermal tourmaline but the range of average boron isotope data is essentially identical with that of the metasediment-hosted tourmaline. Rock-forming (magmatic) tourmaline from leucogranite has δ¹¹B values between − 14.5‰ and − 10.8‰ and the major element composition is similar to that of the metasediment-hosted tourmaline.The range of δ³⁴S_VCDT values measured in pyrite, chalcopyrite and pyrrhotite is from − 9.1 to + 8.5‰, which falls within the typical range of sulphur isotope data for Archaean orogenic gold deposits. In the Hattu schist belt, positive δ³⁴S_VCDT values characterize metasediment-hosted gold ores with sulphide parageneses dominated by pyrrhotite and arsenopyrite. The δ³⁴S_VCDT values are both positive and negative in ore mineral parageneses within felsic intrusive rocks in which variable amounts of pyrrhotite are associated with pyrite. Purely negative values were only recorded from the pyrite-dominated gold mineralization within metavolcanic units. Therefore the shift of δ³⁴S_VCDT values to the negative values reflects precipitation of sulphide minerals from relatively oxidizing fluids. The range of measured δ⁶⁵Cu_NBS978 values from chalcopyrite is from − 1.11 to 1.19‰. Positive values are common for mineralization in felsic intrusive rocks and negative values are more typical for deposits confined to metasedimentary rocks. Positive and negative δ⁶⁵Cu_NBS978 values occur in the ores hosted by metavolcanic rocks. There is no correlation between sulphur and copper isotope data obtained in the same chalcopyrite grains.Evaluation of sulphur and boron isotope data together and comparisons with other Archaean orogenic gold provinces supports the hypothesis that the metasedimentary rocks were the major sources of sulphur and boron in the orogenic gold deposits in the Hattu schist belt. Variations in major element and boron isotope compositions in tourmaline, as well as in the δ³⁴S_VCDT values in sulphide minerals are attributed to localized involvement of magmatic fluids in the hydrothermal processes. The results of copper isotope studies indicate that local sources of copper in orogenic gold deposits may potentially be recognized if the original, distinct signatures of the sources have not been homogenized by widespread interaction of fluids with a large variety of rocks and provided that local chemical variations have been too small to trigger changes in the oxidation state of copper during hydrothermal processes.     

Noble metal-graphite mineralization: A comparative study of the carbonaceous granite-gneiss complex and shales of the Russian Far East

A new noble metal-graphite mineralization has been revealed in the Ruzhino amphibolite-facies rocks of the northern Khanka block. It is characterized by Au and PGE (platinum group elements) contents (up to tens g/t, Pt > Au) as high as those in world-class deposits hosted by sedimentary and magmatic rocks, but is distinguished from them by isotopic composition of carbon, hydrogen and oxygen, all suggesting a distinct mantle contribution (δ¹³С_VPDB from − 8.5 to − 10.5‰ in graphite, δD_VSMOW from − 82.5 to − 106.7‰ and δ¹⁸O_VSMOW from 8.2 to 10.1‰ in biotite). The Ruzhino-type mineralization is highly resistant to common chemical treatments, so that detection of their metals requires that some special methods be developed. Atomic Absorption Spectrophotometry and Inductively Coupled Plasma Mass Spectrometry following severe chemical treatments and ignition at 600–650 °C, as well as Ion Mass Spectrometry allowing a direct detection of elements in solid materials were employed in this study. These methods increased noble-metal contents of the graphitized rocks compared to standard analyses including a conventional fire assay. In addition, electron microscopy surveys discovered extremely diverse native-metal and intermetallic complexes with C, O, Cl, F, REE and other elements. The microinclusions, however, represent a minor part of the mineralization. Major constituents seem to form carbonaceous nanocompounds invisible under a microscope. These graphite-based nanocomplexes, which are especially developed in the case of Pt, seem to be responsible for the highly resistant character of the Ruzhino mineralization. They also may be present in the latent form among the common Au ± PGE ores hosted by carbonaceous shales like those we studied in the close vicinity of the Ruzhino amphibolite-facies rocks and in the northeastern Bureya–Jiamusi terrane.     

Predominance of archaea-derived hydrocarbons in an Early Triassic microbialite

We investigated the distribution of lipids in Lower Triassic sedimentary rocks (252–247 myr) from South China, including a shallow water microbialite in the uppermost section of the outcrop. Archaeal derived hydrocarbons were the major constituents of the microbialite from the latest Early Triassic. Among these, we detected (i) abundant C₄₀ acyclic and monocyclic biphytanes (possibly derived from glycerol dialkyl glycerol tetraether lipids) and their degradation products, C_30–39 pseudohomologues and (ii) a C₂₅ head-to-tail linked (regular) isoprenoid hydrocarbon [possibly derived from dialkyl glycerol diether lipids (DGDs)] and its degradation products, C_21–24 pseudohomologues and abundant pristane and phytane. Through combination of compound-specific stable carbon isotope analysis of isoprenoid hydrocarbons, which had average δ¹³C values of −35‰ to −30‰, and their molecular distribution, it was not possible to unambiguously define the archaeal source for the biphytanes in the microbialite. The δ¹³C values for pristane and phytane were similar to those for head-to-tail linked C_21–25 isoprenoids; potential source organisms for these compounds were halophilic archaea. Except for methane seep microbialites, no other ancient or recent phototrophic microbialites have been reported to contain predominantly archaeal isoprenoid hydrocarbons. Our findings suggest the presence of a new type of microbialite.     

The origin of the Dapingzhang volcanogenic Cu–Pb–Zn ore deposit,Yunnan province,SW China: Constraints from host rock geochemistry and ore Os–Pb–S–C–O–H isotopes

The Dapingzhang volcanogenic Cu–Pb–Zn sulfide deposit is located in the Lancangjiang tectonic zone within the Sanjiang region, Yunnan province of southwestern China. The deposit occurs within a felsic volcanic dome belonging to a mid-Silurian volcanic belt stretching for more than 100 km from Dapingzhang to Sandashan. The mineralized volcanic rocks are predominantly keratophyre and quartz keratophyre with subordinate spilite. The Dapingzhang deposit is characterized by well-developed vertical zonation with stockwork ores in the bottom, disseminated sulfide ores in the middle, and massive sulfide ores in the top, overlain by a thin layer of chemical sedimentary exhalative rocks (chert and barite). The Re–Os age of the pyrites from the deposit is 417 ± 23 Ma, indistinguishable from the age of the associated felsic volcanic rocks. The associated felsic volcanic rocks are characterized by negative Nb–Ta anomalies and positive ε_Nd(t) values (+ 4.4–+6.5), similar to the coeval calc-alkaline volcanic rocks in the region. This observation supports the interpretation that the felsic volcanic rocks associated with the Dapingzhang deposit are the derivatives of arc basaltic magma by extensive fractional crystallization. The δ³⁴S values of the sulfides from the deposit vary from − 1.24 to + 4.32‰, indicating a predominantly magmatic source for the sulfur. The sulfides are also characterized by homogeneous and relatively low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.310–18.656, ²⁰⁷Pb/²⁰⁴Pb = 15.489–15.643 and ²⁰⁸Pb/²⁰⁴Pb = 37.811–38.662), similar to the Pb isotopic compositions of the associated volcanic rocks. The Pb isotopic data indicate that mantle-derived Pb is more prevalent than crust-derived Pb in the deposit. The S–Pb isotopic data indicate that the important ore-forming materials were mainly derived from the associated volcanic rocks. The δ¹³C_PDB and δ¹⁸O_SMOW values of the associated hydrothermal calcite crystals vary from − 2.3‰ to + 0.27‰ and from + 14.6 to + 24.4‰, respectively. These values are between the mantle and marine carbonate values. The narrow range of the δ¹³C_PDB values for the calcite indicates that carbon-bearing species in the hydrothermal fluids were primarily derived from marine carbonates. The δ¹⁸O values for the hydrothermal fluids, calculated from the measured values for quartz, are between − 2.1‰ and + 3.5‰. The corresponding δD values for the fluids range from − 59‰ to − 84‰. The O–H isotopic data indicate mixing between magmatic fluids and seawater in the ore-forming hydrothermal system. Similar to a typical volcanogenic massive sulfide (VMS) deposit, the ore-forming fluids contained both magmatic fluids and heated seawater; the ore metals and regents were derived from the underlying magma as well as felsic country rocks.     

High-resolution stable carbon isotope monitoring indicates variable flow dynamic patterns in a deep saline aquifer at the Ketzin pilot site (Germany)

Stable isotopes of injected CO₂ act as useful tracers in carbon capture and storage (CCS) because the CO₂ itself is the carrier of the tracer signal and remains unaffected by sorption or partitioning effects. At the Ketzin pilot site (Germany), carbon stable isotope composition (δ¹³C) of injected CO₂ at the injection well was analyzed over a time period of 4 months. Occurring isotope variances resulted from the injection of CO₂ from two different sources (an oil refinery and a natural gas-reservoir). The two gases differed in their carbon isotope composition by more than 27‰. In order to find identifiable patterns of these variances in the reservoir, more than 250 CO₂-samples were collected and analyzed for their carbon isotope ratios at an observation well 100 m distant from the injection well. An isotope ratio mass spectrometer connected to a modified Thermo Gasbench system allowed quick and cost effective isotope analyses of a high number of CO₂ gas specimens. CO₂ gas from the oil refinery (δ¹³C = −30.9‰, source A) was most frequently injected and dominated the reservoir δ¹³C values at the injection site. Sporadic injection of the CO₂ from the natural gas-reservoir (δ¹³C = −3.5‰, source B) caused isotope shifts of up to +5‰ at the injection well. These variances provided a potential ideal tracer for CO₂ migration behavior. Based on these findings, tracer input signals that were injected during the last 2 years of injection could be reconstructed with the aid of an isotope mixing model and CO₂ delivery schedules. However, in contrast to the injection well, δ¹³C values at the observation well showed no variances and a constant value of −28.5‰ was measured at 600 m depth. This is in disagreement with signals that would be expected if the input signals from the injection would arrive at the observation well. The lack of isotope signals at the observation well suggests that parts of the reservoir are filled with CO₂ that is immobilized.     

SHRIMP zircon U–Pb geochronology,geochemistry and H–O–Si–S–Pb isotope systematics of the Kanggur gold deposit in Eastern Tianshan,NW China: Implication for ore genesis

The Kanggur gold deposit is located in the southern margin of the Central Asia Orogenic Belt and in the western segment of the Kanggur–Huangshan ductile shear belt in Eastern Tianshan, northwestern China. The orebodies of this deposit are hosted in the Lower Carboniferous volcanic rocks of the Aqishan Formation and mainly consist of andesite, dacite and pyroclastic rocks. The SHRIMP zircon U–Pb age data of the andesite indicate that the volcanism in the Kanggur area might have occurred at ca. 339 Ma in the Early Carboniferous, and that the mineralization age of the Kanggur gold deposit was later than the age of volcanic rocks in the area. Geochemically, the andesite rocks of the Aqishan Formation belong to low-tholeiite and calc-alkaline series and display relative depletions in high field strength elements (HFSEs; i.e. Nb, Ta and Ti). The δ¹⁸O_w and δD_w values vary from − 9.1‰ to + 3.8‰ and − 66.0‰ to − 33.9‰, respectively, indicating that the ore-forming fluids were mixtures of metamorphic and meteoric waters. The δ³⁰Si values of 13 quartz samples range from − 0.3‰ to + 0.1‰ with an average of − 0.15‰, and the δ³⁴S values of 18 sulphide samples range from − 0.9‰ to + 2.2‰ with an average of + 0.54‰. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb values of 10 sulphide samples range from 18.166 to 18.880, 15.553 to 15.635 and 38.050 to 38.813, respectively, showing similarities to orogenic Pb; these values are consistent with those of the andesite from the Kanggur area, suggesting a common lead source. All of the silicon, sulphur and lead isotopic systems indicate that the ore-forming fluids and materials were mainly derived from the Aqishan Formation, and that the host volcanic rocks of the Aqishan Formation probably played a significant role in the Kanggur gold mineralization. Integrating the data obtained from studies on geology, geochronology, petro-geochemistry and H–O–Si–S–Pb isotope systematics, we suggest that the Kanggur gold deposit is an orogenic-type deposit formed in Eastern Tianshan orogenic belt during the Permian post-collisional tectonism.     

Chemostratigraphy and detrital zircon geochronology of the Neoproterozoic Khorbusuonka Group,Olenek Uplift,Northeastern Siberian platform

This study provides ⁸⁷Sr/⁸⁶Sr, δ¹³C and δ¹⁸O data from the best-preserved limestone and dolomite of the Ediacaran carbonate-dominated Khorbusuonka Group of the Olenek Uplift, NE Siberian Craton, as well as detrital zircon geochronological data from both underlying and overlying sandstones. The Maastakh Formation is characterized by ⁸⁷Sr/⁸⁶Sr ratios of ca. 0.70822 and δ¹³C values between + 4.8 and + 6.0‰. ⁸⁷Sr/⁸⁶Sr ratios in limestones of the Khatyspyt Formation are fairly uniform, ranging from 0.70783 to 0.70806. The carbon isotopic composition slowly decreases from bottom (+ 3.7‰) to top (− 0.2‰) of section. The Sr isotopic composition of the Turkut Formation varies from 0.70824 to 0.70914, value of δ¹³C is about zero: − 0.7…+0.7 ‰. The youngest population of detrital zircons from Maastakh Formation indicates that these rocks were formed not later than 630 Ma. U–Pb detrital zircons data of Kessyusa Group has a single peak at about 543 Ma, which is almost identical to the earlier dating. Based on biostratigraphy and isotopic data, the Sr isotopic compositions from the Khatyspyt Formation (⁸⁷Sr/⁸⁶Sr = 0.70783–0.70806) represent the composition of seawater at 560–550 Ma. Such low values of ⁸⁷Sr/⁸⁶Sr ratio in Ediacaran water were probably caused by the quick opening of Iapetus Ocean.     

Extremely negative and inhomogeneous sulfur isotope signatures in Cretaceous Chilean manto-type Cu–(Ag) deposits,Coastal Range of central Chile

Chilean manto-type (CMT) Cu(–Ag) hydrothermal deposits share a characteristic association of volcano-sedimentary Jurassic to Lower Cretaceous host rocks, style of mineralization, ore and associated mineralogy and geochemistry, with ore grades typically > 1%Cu, that make this family of deposits significant and interesting, both academically and economically. Although often stratabound, geological evidence supports an epigenetic origin for these deposits. We present a detailed stable isotope study of La Serena and Melipilla–Naltahua Lower Cretaceous deposits, central Chile, which reveals extremely negative δ³⁴S values, to − 50‰, which are among the lowest values found in any ore deposit. In addition, the range of δ³⁴S values from sulfides in the two areas is very wide: − 38.3 to − 6.9‰ in La Serena, and − 50.4 to − 0.6‰ in Melipilla–Naltahua. These new data significantly extended the reported range of δ³⁴S data for CMT deposits. Co-existing sulfates range from 7.9 to 14.3‰, and are exclusive to La Serena deposit. The wide sulfide isotopic range occurs at deposit and hand specimen scale, and suggests a polygenic sulfur source for these deposits, where bacteriogenic sulfide dominates. While sulfur isotope data for the bulk of Jurassic CMT deposits, northern Chile, suggests a predominant magmatic source in their origin (mean = − 2.7 ± 1.9‰, 1σ), contributions of a magmatic component is only likely to be involved at Melipilla–Naltahua deposit.The δ¹³C values obtained for calcites associated with the mineralization range from − 20.1 to 0.2‰ also suggesting polygenic carbon sources, with the likely strong involvement of degradation of organic matter and leaching of limestone.Two different genetic models, with involvement of hydrocarbon, are proposed for both areas. For Melipilla–Naltahua, a two-step model can be developed as follows: 1) Framboidal pyrite growth, with very low δ³⁴S, formed by bacterial sulfate reduction in an open system, and with diagenetic degradation of oil-related brines, leaving pyrobitumen. 2) Cu-bearing stage, replacing of framboidal pyrite, inheriting depleted sulfur as low as − 50.4‰, together with sulfides directly precipitated from a hydrothermal fluid with δ³⁴S close to 0‰. For La Serena, a single step model fits best, without framboidal pyrite generation. Cu-bearing sulfides were precipitated mainly in veins where Cu plus base metal-bearing hydrothermal fluids mixed with H₂S generated by bacterial sulfate reduction in the host rocks. Isotopic evidence clearly illustrates that bacterial activity, perhaps enhanced by hydrothermal activity, was fed by hydrocarbon brines and sulfate remobilized from continental evaporites. It is possible that variable ecological conditions led to different extents of isotopic fractionation, adding to the typical sulfur isotopic heterogeneity of such bacterial systems. For both areas, the Cu-bearing stage occurred during the peak to waning stages of the very low-grade metamorphism that affected the Lower Cretaceous sequence.