Deep pooling of low degree melts and volatile fluxes at the 85°E segment of the Gakkel Ridge: Evidence from olivine-hosted melt inclusions and glasses

We present new analyses of volatile, major, and trace elements for a suite of glasses and melt inclusions from the 85°E segment of the ultra-slow spreading Gakkel Ridge. Samples from this segment include limu o pele and glass shards, proposed to result from CO₂-driven explosive activity. The major element and volatile compositions of the melt inclusions are more variable and consistently more primitive than the glass data. CO₂ contents in the melt inclusions extend to higher values (167–1596 ppm) than in the co-existing glasses (187–227 ppm), indicating that the melt inclusions were trapped at greater depths. These melt inclusions record the highest CO₂ melt concentrations observed for a ridge environment. Based on a vapor saturation model, we estimate that the melt inclusions were trapped between seafloor depths (～ 4 km) and ～ 9 km below the seafloor. However, the glasses are all in equilibrium with their eruption depths, which is inconsistent with the rapid magma ascent rates expected for explosive activity. Melting conditions inferred from thermobarometry suggest relatively deep (25–40 km) and cold (1240°–1325 °C) melting conditions, consistent with a thermal structure calculated for the Gakkel Ridge. The water contents and trace element compositions of the melt inclusions and glasses are remarkably homogeneous; this is an unexpected result for ultra-slow spreading ridges, where magma mixing is generally thought to be less efficient based on the assumption that steady-state crustal magma chambers are absent in these environments. All melts can be described by a single liquid line of descent originating from a pooled melt composition that is consistent with the aggregate melt calculated from a geodynamic model for the Gakkel Ridge. These data suggest a model in which deep, low degree melts are efficiently pooled in the upper mantle (9–20 km depth), after which crystallization commences and continues during ascent and eruption. Based on our melting model and the assumption that CO₂ is perfectly incompatible, we show that the highest CO₂ concentrations of the melt inclusions (～ 1600 ppm) are consistent with the calculated CO₂ concentrations of primary undegassed melts. The highest measured CO₂/Nb ratio (443) of Gakkel Ridge melt inclusions predicts a mantle CO₂ content of 134 ppm and would result in a global ridge flux of 2.0 × 10¹² mol CO₂/yr.     

Partitioning of U and Th during garnet pyroxenite partial melting: Constraints on the source of alkaline ocean island basalts

Uranium series disequilibria in ocean island basalts (OIB) provide evidence for the presence of garnet in their source region. It has been suggested that enriched OIB signatures derive from mantle lithologies other than peridotite, such as eclogite or pyroxenite, and, in particular, that silica-poor garnet pyroxenite is the source lithology for alkali basalts. To test the ability of such a source to produce the U–Th disequilibria observed in alkali OIB, we determined experimentally clinopyroxene-melt and garnet-melt partition coefficients for a suite of trace elements, including U and Th, at 2.5 GPa and 1420–1450 °C. The starting composition for the experiments was a 21% partial melt of a silica-poor garnet pyroxenite. Experimentally determined clinopyroxene-melt partition coefficients range from 0.0083 ± 0.0006 to 0.020 ± 0.002 for Th and from 0.0094 ± 0.0006 to 0.024 ±0.002 for U, and garnet-melt partition coefficients are 0.0032 ± 0.0004 for Th and 0.013 ± 0.002 for U. Comparison of our experimental results with partition coefficients from previous experimental studies shows that the relative compatibilities of U and Th in both garnet and clinopyroxene are different for different mineral compositions, leading to varying degrees of U/Th fractionation with changing lithology. For a given melting rate and extent of partial melting, mafic lithologies tend to produce larger ²³⁰Th excesses than peridotite. However, this effect is minimized by the greater overall extents of melting experienced by eclogites and pyroxenites relative to peridotite. Results from chromatographic, batch, and fractional melting calculations with binary mixing between partial melts of pyroxenite and peridotite, carried out using our new partitioning data for the pyroxenite component and taking into account variable productivities and different solidus depths for the two lithologies, suggest that OIB are not the product of progressive melting of a source containing a fixed quantity of garnet pyroxenite. Melting a peridotite with enriched signatures, and mixing those melts with melts of a depleted, “normal” peridotite, is an alternative explanation for the trends seen in Hawaiian, Azores and Samoan lavas.     

Static compression of hydrous silicate melt and the effect of water on planetary differentiation

High pressure experiments using the sink/float method have bracketed the density of hydrous iron-rich ultrabasic silicate melt from 1.35 to 10.0 GPa at temperatures from 1400 to 1860 °C. The silicate melt composition was a 50–50 mixture of natural komatiite and synthetic fayalite. Water was added in the form of brucite Mg(OH)₂ and was present in the experimental run products at 2 wt.% and 5 wt.% levels as confirmed by microprobe analyses of total oxygen. Buoyancy marker spheres were olivines and garnets of known composition and density. The density of the silicate melt with 5 wt.% water at 2 GPa and 1500 °C is 0.192 g cm^? 3 less than the anhydrous form of this melt at the same P and T. This density difference gives a partial molar volume of water in silicate melt of ～ 7 cm³ mol^? 1, which is similar to previous studies at high pressure. The komatiite–fayalite liquids with 0 and 2 wt.% H₂O, have extrapolated density crossovers with equilibrium liquidus olivine at 8 and 9 GPa respectively, but there is no crossover for the liquid with 5 wt.% H₂O. These results are consistent with the hypothesis that dense hydrous melts could be gravitationally stable atop the 410 km discontinuity in the Earth. The results also support the notion that equilibrium liquidus olivine could float in an FeO-rich hydrous martian magma ocean. Extrapolation of the data suggests that FeO-rich hydrous melt could be negatively buoyant in the Earth's D″-region or atop the core–mantle-boundary (CMB), although experiments at higher pressure are needed to confirm this prediction.     

Aleutian magnesian andesites: Melts from subducted Pacific ocean crust

Several diagnostic chemical characteristics of an uncommon Aleutian magma type support a proposed origin that involves a small amount of partial melting of subducted Pacific ocean crust (basalt) consisting mainly of garnet and clinopyroxene (eclogite or garnet websterite). Among the characteristics are high La/Yb ratios and Sr contents and low ratios of radiogenic to non-radiogenic Sr and Pb. The major element composition of the andesites resembles that of hydrous melts in equilibrium with peridotite: a low ratio of total Fe to Mg is distinctive. These disparate observations can be reconciled if large ion lithophile (LIL)- element-rich hydrous melt from the subducted oceanic crust equilibrates with olivine and orthopyroxene in overlying LIL-element-depleted mantle and then erupts without interacting with the island are crust. The compositional dissimilarity of the magnesian andesites and most other andesites from the Aleutian island arc precludes application of this model to island are magmatism in general.     

Rheological contrast between garnet and clinopyroxene in the mantle wedge: An example from Higashi-akaishi peridotite mass,SW Japan

Garnet clinopyroxenites occur within foliated dunite in the Higashi-akaishi peridotite mass, located within the subduction-type high-pressure/low-temperature Sanbagawa metamorphic belt. The garnet clinopyroxenites contain 3–80% garnet, and garnet and clinopyroxene are homogeneously distributed. Garnet crystals contain extensive, regular dislocation arrays and dislocation networks, suggesting that dislocation creep was the dominant deformation mechanism. Analyses of crystallographic orientation maps indicate similar grain sizes and aspect ratios for garnet and clinopyroxene, regardless of modal composition, indicating that these minerals deformed with similar degree of plasticity. Moreover, indexes of crystallographic fabric intensity (i.e., J-index and M-index) for both garnet and clinopyroxene tend to increase with increasing modal composition of garnet. Fourier-transform infrared spectroscopy analysis revealed that water content in garnet is ～60 ppm, whereas that in clinopyroxene is ～70 ppm. Olivine crystal-preferred orientations in the Higashi-akaishi peridotite mass, characterized by [0 0 1] (0 1 0), are thought to have developed during deformation under wet conditions. Consequently, we argue that the presence of water could act to enhance garnet plasticity during deformation. The results reveal contrasting influences of water on the deformation of garnet and diopside: under wet conditions compared with dry, the strain rate increases by two orders of magnitude for garnet but by an order of magnitude for diopside. Given the influence of water on the creep strength of garnet, garnet within the Higashi-akaishi mass may have become significantly as weak as clinopyroxene during deformation.     

Interaction of adakitic melt-peridotite: Implications for the high-Mg# signature of Mesozoic adakitic rocks in the eastern North China Craton

Abundant dunite and harzbugite xenoliths are preserved in Early Cretaceous high-Mg# [63–67, where Mg# = molar 100 × Mg/(Mg + Fe_tot)] diorite intrusions from western Shandong in the North China Craton (NCC). Dunite and some harzburgite xenoliths typically preserve areas of orthopyroxenite (sometimes accompanied by phlogopite) either as veins or as zones surrounding chromite grains. Harzburgite is chiefly composed of olivine, orthopyroxene, minor clinopyroxene and chromian-spinel. High Mg#'s (averaging 91.4) and depletions in Al₂O₃ and CaO (averaging 0.52 wt.% and 0.29 wt.%, respectively) in harzburgite and dunite xenoliths suggest that they are residues formed by large degrees of polybaric melting. However, olivines and orthopyroxenes from dunite xenoliths spatially associated with orthopyroxenite display lower Mg#'s (i.e., 82–87 and 83–89, respectively), suggesting that an adakitic melt–peridotite reaction has taken place. This is consistent with the production of veined orthopyroxene or orthopyroxene + phlogopite in dunite and some harzburgite xenoliths in response to the introduction of adakitic melt into the previously depleted lithospheric mantle (i.e., harzburgite and dunite xenoliths). The presence of orthopyroxene in veins or as a zones surrounding chromite in peridotite xenoliths is thought to be representative of adakitic melt metasomatism. The dunite and harzbugite xenoliths are relatively rich in light rare earth elements (LREEs) and large ion lithophile elements (LILEs), poor in heavy rare earth elements (HREEs) and high field strength elements (HFSEs), and lack Eu anomalies on chondrite normalized trace element diagrams. The initial ⁸⁷Sr/⁸⁶Sr ratios and εNd(t) values for the xenoliths range from 0.7058 to 0.7212 and + 0.18 to ? 19.59, respectively. Taken together, these features, combined with the strong depletion in HFSE and the existence of Archean inherited zircons in the host rocks, suggest that the adakitic melt was derived from the partial melting of early Mesozoic delaminated lower continental crust. The interaction of the adakitic melt with peridotite is responsible for the high-Mg# character of the early Cretaceous diorites in western Shandong.     

Melting relations in the chloride–carbonate–silicate systems at high-pressure and the model for formation of alkalic diamond–forming liquids in the upper mantle

The experiments in the model system CaMgSi₂O₆–(Na₂CO₃, CaCO₃)–KCl are performed at 5 GPa and 1400–1600 °C in order to study the phase relations, including liquid immiscibility, in the chloride–carbonate–silicate systems with application to alkali and chlorine-rich liquids preserved in kimberlitic diamonds. Experiments in the boundary joins of the system demonstrated that both the carbonate–silicate and chloride–carbonate melts are homogeneous; while high-temperature (above 1800 °C) liquid immiscibility is assumed for the chloride–silicate join of the above system. Addition of silicate component into the chloride–carbonate melts and chloride component into the carbonate–silicate melts results in splitting of the homogeneous liquids into the immiscible chloride–carbonate brine and carbonate–silicate melt. Carbonate–silicate and chloride–carbonate branches of the miscibility gap converge within the carbonate-rich region of the system. Regular temperature evolution of the shape and size of the miscibility gap is deduced. With decreasing temperature, the convergence point moves toward more Si-rich compositions, expanding fields of homogeneous chloride–carbonate silica-saturated melts. This effect is governed by the precipitation of the silicate phases even from silica-bearing chloride–carbonate melts. In addition, experiments revealed regular evolution of both Cl-bearing carbonate–silicate melt and Si-bearing chloride–carbonate brine toward the low-temperature chlorine–bearing carbonatitic liquid with decreasing temperature. These trends are similar to the evolution of the melt and brine inclusions in some diamonds from Botswana, Brazil, Canada, and Yakutia, indicating their growth during cooling. The model for interaction of the chloride–carbonate brine with the mantle rocks is developed on the basis of the present experimental data. This model is applied to the chlorine-enriched kimberlites of the Udachnaya–East pipe.     

A new method to estimate the oxidation state of basaltic series from microprobe analyses

The oxygen fugacity and therefore the iron redox state of a melt is known to have a strong influence on the liquid line of descent of magmas and thus on the composition of the coexisting melts and crystals. We present a new method to estimate this critical parameter from electron probe microanalyses of two of the most common minerals of basaltic series, plagioclase and clinopyroxene. This method is not based on stoichiometric calculations, but on the different partitioning behaviour of Fe³⁺ and Fe²⁺ between both minerals and a melt phase: plagioclase can incorporate more Fe³⁺ than Fe²⁺, while clinopyroxene can incorporate more Fe²⁺ than Fe³⁺. For example, the effect of oxidizing a partly molten basaltic system (Fe³⁺ is stabilized with respect to Fe²⁺) results in an increase of FeO_total in plagioclase, but a decrease in the associated clinopyroxene. We propose an equation, based on published partition coefficients, that allows estimating the redox state of a melt from these considerations. An application to a set of experimental and natural data attests the validity of the proposed model. The associated error can be calculated and is on average < 1 log unit of the prevailing oxygen fugacity.In order to reduce the number of different variables influencing the Fe²⁺/Fe³⁺ mineral/melt equilibrium, our model is restricted to basaltic series with SiO₂ < 60% that have crystallized at intermediate to low pressure (< 0.5 GPa) and under relatively oxidizing conditions (?FMQ > 0; where FMQ is the fayalite–magnetite–quartz oxygen buffer equilibrium), but it may be parameterized for other conditions. A spreadsheet is provided to assist the use of equations, and to perform the error propagation analysis.     

Lithospheric contributions to high-MgO basanites from the Cumbre Vieja Volcano,La Palma,Canary Islands and evidence for temporal variation in plume influence

New geochemical and isotopic data are presented from the oldest part of the Cumbre Vieja volcano, La Palma (Canary Islands), located near the assumed emergence of the Canary mantle plume. The volcanics comprise a suite dominated by basanite flows with subordinate amounts of phono-tephrite, tephri-phonolite and phonolite flows and intrusives. Two compositionally different basanite groups have been identified, both with HIMU (high-μ)-type incompatible trace element characteristics: Primitive high-MgO basanites (10.7–12.1% MgO), found only at the base of a stratigraphic profile near Fuencaliente on the south coast, and intermediate-MgO basanites (6.0–7.3% MgO), exposed in the upper part of the profile and widespread on the east coast of La Palma. The high-MgO basanites are interpreted as near-primary mantle melts (primary composition 14–15% MgO) derived by progressive melting (2.9% to 4.5%) of a common lithospheric mantle source. Model calculations indicate that it is not possible to generate the intermediate-MgO basanites from the high-MgO group by crystal fractionation of observed phenocrysts. Relative to intermediate-MgO basanites, the high-MgO flows have lower concentrations of LIL and HFS elements, except for Ti, which is markedly enriched in the primitive rocks (3.7–4.7% TiO₂ vs 3.4–3.9% TiO₂). Fuencaliente volcanics display limited temporal isotopic variations suggested to be a result of mixing of melts originating from the rising plume and the metazomatized lithospheric mantle. ⁸⁷Sr / ⁸⁶Sr and ¹⁴³Nd / ¹⁴⁴Nd ratios range 0.70305–0.70311 and 0.51285–0.51291, respectively, while the corresponding ranges in Pb-isotope ratios are ²⁰⁶Pb / ²⁰⁴Pb = 19.46–19.64, ²⁰⁷Pb / ²⁰⁴Pb = 15.55–15.61, and ²⁰⁸Pb / ²⁰⁴Pb = 39.16–39.53. The overall variation of the Cumbre Vieja isotopic data can be accounted for by mixtures of three mantle components in the proportions 72–79% plume source (LVC = low velocity component), 9–16% depleted mantle (DM) and up to 12% enriched mantle (EMI). Negative Δ7 / 4 Pb (− 0.6 to − 5.4) in the Cumbre Vieja volcanics suggest derivation from a young HIMU mantle source. The relative abundance of plume source material increase in younger rocks in the Fuencaliente section, suggesting waning plume–lithosphere interaction during the emplacement of this part of the Cumbre Vieja volcano. The high-MgO volcanics define regular and systematic geochemical trends, interpreted as partial melting trends, when plotted against abundances of highly incompatible elements (P, Ce). Evaluation of minor and trace element variation in consecutive melts suggests control by residual amphibole, phlogopite, garnet and a Ti-bearing phase, possibly ilmenite. The melting mode changed gradually, allowing increasing input from residual phlogopite during partial melting. The residual mineralogy constrains the source region of the high-MgO basanites to the lowermost oceanic lithospheric mantle, presumably around 100 km depths.     

The pre-eruptive volatile contents of recent basaltic and pantelleritic magmas at Pantelleria (Italy)

Pantelleria Island, located in the Sicily Channel Rift Zone (Italy), is the type locality for the peralkaline rhyolitic rocks called pantellerites. In the last 50 ka, after the large Green Tuff caldera-forming eruption, volcanic activity at Pantelleria has consisted of effusive and explosive eruptions mostly vented inside and along the rim of the caldera and producing silicic lava flows, lava domes and poorly dispersed pantelleritic pumice fall deposits. Basaltic cinder cones and lava flows are only present outside the caldera in the NW sector of the island. The most recent basaltic (Cuddie Rosse, ～ 20 ka) and pantelleritic (Cuddia Randazzo and Cuddia del Gallo, ～ 6 ka) pyroclastic products were sampled to investigate magmatic volatile contents through the study of melt inclusions.The melt inclusions in pyroxene and olivine phenocrysts of Cuddie Rosse scoriae have an alkali basalt composition. The dissolved volatiles comprise 0.9–1.6 wt.% H₂O, several hundred ppm of CO₂, 1600–2000 ppm of sulphur and 500–900 ppm of chlorine. The water–carbon dioxide couple gives a confining pressure ～ 2 kbar prior to the eruption. This result indicates that episodes of magma ponding and crystallization occurred in the upper crust prior to eruption. The melt inclusions in feldspar, fayalite and aenigmatite phenocrysts of Cuddia del Gallo and Cuddia Randazzo pumice have a pantelleritic composition (Agpaitic Indices 1.3–2.1), up to 4.4 wt.% H₂O, 8700 ppm Cl, 6000 ppm F, and CO₂ below the detection limit. Sulphur averaging 420 ppm has been measured in Cuddia Randazzo melt inclusions. These data indicate relatively high volatile contents for these low-energy Strombolian-type eruptions. Melt inclusions in Cuddia del Gallo pumice show the most evolved composition (Agpaitic Indices 2–2.1) and the highest volatile content, in agreement with fluid saturation conditions in the magma chamber prior to the eruption. This implies a confining pressure of ～ 1 kbar for the top of the pantelleritic reservoir. The composition of melt inclusions and mineralogical assemblage of Cuddia Randazzo pumice indicate that it has a lower evolutionary degree (Agpaitic Indices 1.3–1.8) and lower pre-eruptive Cl and H₂O contents than Cuddia del Gallo pumice. An increase in pressure due to the exsolution of volatiles in the upper part of the pantelleritic reservoir may have triggered the Cuddia del Gallo explosive eruption. Evidence of widespread pre-eruptive mingling between trachytes and pantellerites suggests that the intrusion of trachytic magma into the pantelleritic reservoir likely played a major role in destabilizing the magma system just prior to the Cuddia Randazzo event.     

Discriminating assimilants and decoupling deep- vs. shallow-level crystal records at Mount Adams using 238U–230Th disequilibria and Os isotopes

A suite of 23 basaltic to dacitic lavas erupted over the last 350 kyr from the Mount Adams volcanic field has been analyzed for U–Th isotope compositions to evaluate the roles of mantle versus crustal components during magma genesis. All of the lavas have (²³⁰Th/²³⁸U) > 1 and span a large range in (²³⁰Th/²³²Th) ratios, and most basalts have higher (²³⁰Th/²³²Th) ratios than andesites and dacites. Several of the lavas contain antecrysts (crystals of pre-existing material), yet internal U–Th mineral isochrons from six of seven lavas are indistinguishable from their eruption ages. This indicates a relatively brief period of time between crystal growth and eruption for most of the phenocrysts (olivine, clinopyroxene, plagioclase, magnetite) prior to eruption. One isochron gave a crystallization age that is ~ 20–25 ka older than its corresponding eruptive age, and is interpreted to reflect mixing of older and juvenile crystals or a protracted period of magma storage in the crust. Much of the eruptive volume since 350 ka consists of lavas that have small to moderate ²³⁰Th excesses (2–16%), which are likely inherited from melting of a garnet-bearing intraplate (“OIB-like”) mantle source. Following melt generation and subsequent migration through the upper mantle, most Mt. Adams magmas interacted with young, mafic lower crust, as indicated by ¹⁸⁷Os/¹⁸⁸Os ratios that are substantially more radiogenic than the mantle or those expected via mixing of subducted material and the mantle wedge. Moreover, Os–Th isotope variations suggest that unusually large ²³⁰Th excesses (25–48%) and high ¹⁸⁷Os/¹⁸⁸Os ratios in some peripheral lavas reflect assimilation of small degree partial melts of pre-Quaternary basement that had residual garnet or Al-rich clinopyroxene. Despite the isotopic evidence for lower crustal assimilation, these processes are not generally recorded in the erupted phenocrysts, indicating that the crystal record of the deep-level ‘cryptic’ processes has been decoupled from shallow-level crystallization.     

Deccan plume,lithosphere rifting,and volcanism in Kutch,India

Kutch (northwest India) experienced lithospheric thinning due to rifting and tholeiitic and alkalic volcanism related to the Deccan Traps K/T boundary event. Alkalic lavas, containing mantle xenoliths, form plug-like bodies that are aligned along broadly east–west rift faults. The mantle xenoliths are dominantly spinel wehrlite with fewer spinel lherzolite. Wehrlites are inferred to have formed by reaction between transient carbonatite melts and lherzolite forming the lithosphere. The alkalic lavas are primitive (Mg# = 64–72) relative to the tholeiites (Mg# = 38–54), and are enriched in incompatible trace elements. Isotope and trace element compositions of the tholeiites are similar to what are believed to be the crustally contaminated Deccan tholeiites from elsewhere in India. In terms of Hf, Nd, Sr, and Pb isotope ratios, all except two alkalic basalts plot in a tight cluster that largely overlap the Indian Ridge basalts and only slightly overlap the field of Reunion lavas. This suggests that the alkalic magmas came largely from the asthenosphere mixed with Reunion-like source that welled up beneath the rifted lithosphere. The two alkalic outliers have an affinity toward Group I kimberlites and may have come from an old enriched (metasomatized) asthenosphere. We present a new model for the metasomatism and rifting of the Kutch lithosphere, and magma generation from a CO₂-rich lherzolite mantle. In this model the earliest melts are carbonatite, which locally metasomatized the lithosphere. Further partial melting of CO₂-rich lherzolite at about 2–2.5 GPa from a mixed source of asthenosphere and Reunion-like plume material produced the alkalic melts. Such melts ascended along deep lithospheric rift faults, while devolatilizing and exploding their way up through the lithosphere. Tholeiites may have been generated from the main plume head further south of Kutch.     

Mixed fluid sources involved in diamond growth constrained by Sr–Nd–Pb–C–N isotopes and trace elements

Sub-micrometer inclusions in diamonds carry high-density fluids (HDF) from which the host diamonds have precipitated. The chemistry of these fluids is our best opportunity of characterizing the diamond-forming environment. The trace element patterns of diamond fluids vary within a limited range and are similar to those of carbonatitic/kimberlitic melts that originate from beneath the lithospheric mantle. A convecting mantle origin for the fluid is also implied by C isotopic compositions and by a preliminary Sr isotopic study (Akagi, T., Masuda, A., 1988. Isotopic and elemental evidence for a relationship between kimberlite and Zaire cubic diamonds. Nature 336, 665–667.). Nevertheless, the major element chemistry of HDFs is very different from that of kimberlites and carbonatites, varying widely and being characterized by extreme K enrichment (up to ～ 39 wt.% on a water and carbonate free basis) and high volatile contents. The broad spectrum of major element compositions in diamond-forming fluids has been related to fluid–rock interaction and to immiscibility processes.Elemental signatures can be easily modified by a variety of mantle processes whereas radiogenic isotopes give a clear fingerprint of the time-integrated evolution of the fluid source region. Here we present the results of the first multi radiogenic-isotope (Sr, Nd, Pb) and trace element study on fluid-rich diamonds, implemented using a newly developed off-line laser sampling technique. The data are combined with N and C isotope analysis of the diamond matrix to better understand the possible sources of fluid involved in the formation of these diamonds. Sr isotope ratios vary significantly within single diamonds. The highly varied but unsupported Sr isotope ratios cannot be explained by immiscibility processes or fluid-mineral elemental fractionations occurring at the time of diamond growth. Our results demonstrate the clear involvement of a mixed fluid, with one component originating from ancient incompatible element-enriched parts of the lithospheric mantle while the trigger for releasing this fluid source was probably carbonatitic/kimberlitic melts derived from greater depths. We suggest that phlogopite mica was an integral part of the enriched lithospheric fluid source and that breakdown of this mica releases K and radiogenic Sr into a fluid phase. The resulting fluids operate as a major metasomatic agent in the sub-continental lithospheric mantle as reflected by the isotopic composition and trace element patterns of G10 garnets.     

Low-degree melting of a metasomatized lithospheric mantle for the origin of Cenozoic Yulong monzogranite-porphyry,east Tibet: Geochemical and Sr–Nd–Pb–Hf isotopic constraints

SHRIMP zircon U–Pb dating, mineral chemical, element geochemical and Sr–Nd–Pb–Hf isotopic data have been determined for the Yulong monzogranite-porphyry in the eastern Tibet, China. The Yulong porphyry was emplaced into Triassic strata at about 39 Ma. The rocks are weakly peraluminous and show shoshonitic affinity, i.e., alkalis-rich, high K₂O contents with high K₂O / Na₂O ratios, enrichment in LREE and LILE. They also show some affinities with the adakite, e.g., high SiO₂ and Al₂O₃, and low MgO contents, depleted in Y and Yb, and enrichment in Sr with high Sr / Y and La / Yb ratios, and no Eu anomalies. The Yulong porphyry has radiogenic ⁸⁷Sr / ⁸⁶Sr (0.7063–0.7070) and unradiogenic ¹⁴³Nd / ¹⁴⁴Nd (ε_Nd = − 2.0 to − 3.0) ratios. The Pb isotopic compositions of feldspar phenocrysts separated from the Yulong porphyry show a narrow range of ²⁰⁶Pb / ²⁰⁴Pb ratios (18.71–18.82) and unusually radiogenic ²⁰⁷Pb / ²⁰⁴Pb (15.65–15.67) and ²⁰⁸Pb / ²⁰⁴Pb (38.87–39.00) ratios. In situ Hf isotopic composition of zircons that have been SHRIMP U–Pb dated is characterized by clearly positive initial ε_Hf values, ranging from + 3.1 to + 5.9, most between + 4 and + 5. Phenocryst clinopyroxene geothermometry of the Yulong porphyry indicates that the primary magmas had anomalously high temperature (> 1200 °C). The source depth for the Yulong porphyry is at least 100 km inferred by the metasomatic volatile phase (phlogopite–carbonate) relations. Detailed geochemical and Sr–Nd–Pb–Hf isotopic compositions not only rule out fractional crystallization or assimilation-fractional crystallization processes, but also deny the possibility of partial melting of subducted oceanic crust or basaltic lower crust. Instead, low degree (1–5%) partial melting of a metasomatized lithosphere (phlogopite–garnet clinopyroxenite) is compatible with the data. This example gives a case study that granite can be derived directly by partial melting of an enriched lithospheric mantle, which is important to understand the source and origin of diverse granites.     

Volatile and trace elements in basaltic glasses from Samoa: Implications for water distribution in the mantle

We report volatile (H₂O, CO₂, F, S, Cl) and trace element data for submarine alkalic basalt glasses from the three youngest Samoan volcanoes, Ta'u, Malumalu and Vailulu'u. Most samples are visibly sulfide saturated, so have likely lost some S during fractionation. Cl / K ratios (0.04–0.15) extend to higher values than pristine MORBs, but are suspected to be partly due to source differences since Cl / K roughly varies as a function of ⁸⁷Sr / ⁸⁶Sr. There are no resolvable differences in the relative enrichment of F among sources, and compatibility of F during mantle melting is established to be nearly identical to Nd. Shallow degassing has affected CO₂ in all samples, and H₂O only in the most shallowly erupted samples from Vailulu'u. Absolute water contents are high for Samoa (0.63–1.50 wt.%), but relative enrichment of water compared to equally incompatible trace elements (Ce, La) is low and falls entirely below normal MORB values. H₂O / Ce (58–157) and H₂O / La (120–350) correlate inversely with ⁸⁷Sr / ⁸⁶Sr compositions (0.7045–0.7089). This leads us to believe that, because of very fast diffusion of hydrogen in mantle minerals, recycled lithospheric material with high initial water and trace element content will lose water to the drier ambient mantle during storage within the inner Earth. The net result is the counter-intuitive appearance of greater dehydration with greater mantle enrichment. We expect that subducted slabs will experience a two-stage dehydration history, first within subduction zones and then in the ambient mantle during long-term convective mixing.     

Raman micro-spectroscopy on diamond,graphite and other carbon polymorphs from the ultrahigh-pressure metamorphic Kimi Complex of the Rhodope Metamorphic Province,NE Greece

Raman micro-spectroscopy was applied on carbon inclusions in garnet porphyroblasts from kyanite–biotite–garnet schists of the Rhodope Metamorphic Province (RMP), NE Greece. Diamond and cuboids of poorly to highly ordered graphite were identified either as single phase inclusions or as polyphase inclusions along with CO₂ and/or carbonates (calcite/magnesian calcite). Questionable Raman bands that may be assigned to other C-phases (?nanodiamond/?lonsdaleite/?a different C-polymorph) have been observed. The presence of diamond confirms beyond any doubt the ultrahigh-pressure (UHP) metamorphism reported by Mposkos and Kostopoulos [1] [E. Mposkos, D. Kostopoulos, Diamond, former coesite and supersilisic garnet in metasedimentary rocks from the Greek Rhodope: a new ultrahigh-pressure metamorphic province established, Earth Planet. Sci. Lett. 192 (2001) 497–506] in the RMP. Cuboid graphite showing variable degree of disordering most probably formed after diamond. The possible involvement of CO₂ and or C–O–H fluids in the formation of diamond is discussed.     

Late Mesozoic time constraints on tectonic changes of the Luanchuan Mo belt,East Qinling orogen,Central China

Two late Mesozoic granitoids in the Luanchuan area of the East Qinling orogen are considered; ore-bearing rocks are granite porphyries and granodiorite, with K₂O > Na₂O, appearing in the form of stocks. The Laojunshan rocks contains dominantly monzonitic granite, with K₂O ≈ Na₂O, in the form of a batholith. Both the ore-bearing rocks and the Laojunshan rocks are highly siliceous and shoshonitic, high-K calc-alkaline, similar to some I-type granites. Light rare earth elements (LREEs) are enriched in both rock suites, although the Luanchuan ore-bearing granitoids have higher concentrations, with (La/Yb)_N ratios twice that of the barren Laojunshan granite suite. Ore-bearing rocks have, therefore, undergone greater fractionation of heavy rare earth elements. All Laojunshan rocks have negative Eu anomalies, indicating plagioclase fractionation. δEu values are different in both rock suites, the values in the ore-bearing granites, ranging from 0.52 to 1.04, which are much higher than that of Laojunshan batholith, ranging from 0.4 to 0.65. (La/Sm)_N values of ore-bearing granites are 5.32–8.28, while that of Laojunshan batholith are 3.75–5.77, confirming the observation that the ore-bearing granites have undergone a higher degree of strong differentiation than that of Lanjunshan batholith.Major and trace element data, and REE data, combined with isotope data from previous work and the close relationships between the tectonic settings of the barren and ore-bearing rocks indicate that both groups of rocks were derived from the lower crust. At ∼157 Ma, with the tectonic regime in transition from a syn-collisional to a post-collisional setting, highly fractionated granites ascended from their storage area via faults; at ∼145 Ma, ore-bearing plutons, which are triggered by slab melts, formed at the junctions of fault planes trending WNW-ESE and NE-SW. At ∼115 Ma, the tectonic regime changed from compression to extension; in this environment, the barren Laojunshan batholith was emplaced, representing the end of the collisional event.     

Regional variations in trace element concentrations in tissues of black tiger shrimp Penaeus monodon (Decapoda: Penaeidae) from South Vietnam

The goal of the present study was to examine the specific bioaccumulation of 22 trace elements in muscle, exoskeleton and hepatopancreas of black tiger shrimp Penaeus monodon from the Mekong River Delta (MRD), and the South Key Economic Zone (SKEZ), South Vietnam. The general tendency in most trace element concentrations among different tissues were hepatopancreas > exoskeleton > muscle. Comparisons of trace element levels in tissues between the two regions showed that concentrations of Se in muscle and As in all three tissues were higher in SKEZ; whereas in MRD, the higher concentrations of most elements such as Mn, Cu, Cd, Ba, Hg, were observed in tissues. These geographical variations in trace element levels may reflect the differences in human activities between the two regions of South Vietnam. The target hazard quotient (THQ) values for trace elements (<1) indicate that local residents are not exposed to potential health risks via the consumption of shrimp.     

Miocene to Late Quaternary Patagonian basalts (46–47°S): Geochronometric and geochemical evidence for slab tearing due to active spreading ridge subduction

Miocene to Quaternary large basaltic plateaus occur in the back-arc domain of the Andean chain in Patagonia. They are thought to result from the ascent of subslab asthenospheric magmas through slab windows generated from subducted segments of the South Chile Ridge (SCR). We have investigated three volcanic centres from the Lago General Carrera–Buenos Aires area (46–47°S) located above the inferred position of the slab window corresponding to a segment subducted 6 Ma ago. (1) The Quaternary Río Murta transitional basalts display major, trace elements, and Sr and Nd isotopic features similar to those of oceanic basalts from the SCR and from the Chile Triple Junction near Taitao Peninsula (e.g., (⁸⁷Sr/⁸⁶Sr)_o = 0.70396–0.70346 and εNd = + 5.5 − + 3.0). We consider them as derived from the melting of a Chile Ridge asthenospheric mantle source containing a weak subduction component. (2) The Plio-Quaternary (< 3.3 Ma) post-plateau basanites from Meseta del Lago Buenos Aires (MLBA), Argentina, likely derive from small degrees of melting of OIB-type mantle sources involving the subslab asthenosphere and the enriched subcontinental lithospheric mantle. (3) The main plateau basaltic volcanism in this region is represented by the 12.4–3.3-Ma-old MLBA basalts and the 8.2–4.4-Ma-old basalts from Meseta Chile Chico (MCC), Chile. Two groups can be distinguished among these main plateau basalts. The first group includes alkali basalts and trachybasalts displaying typical OIB signatures and thought to derive from predominantly asthenospheric mantle sources similar to those of the post-plateau MLBA basalts, but through slightly larger degrees of melting. The second one, although still dominantly alkalic, displays incompatible element signatures intermediate between those of OIB and arc magmas (e.g., La/Nb > 1 and TiO₂ < 2 wt.%). These intermediate basalts differ from their strictly alkalic equivalents by having lower High Field Strength Element (HFSE) and higher εNd (up to + 5.4). These features are consistent with their derivation from an enriched mantle source contaminated by ca. 10% rutile-bearing restite of altered oceanic crust. The petrogenesis of the studied Mio-Pliocene basalts from MLBA and MCC is consistent with contributions of the subslab asthenosphere, the South American subcontinental lithospheric mantle and the subducted Pacific oceanic crust to their sources. However, their chronology of emplacement is not consistent with an ascent through an asthenospheric window opened as a consequence of the subduction of segment SCR-1, which entered the trench at 6 Ma. Indeed, magmatic activity was already important between 12 and 8 Ma in MLBA and MCC as well as in southernmost plateaus, i.e., 6 Ma before the subduction of the SCR-1 segment. We propose a geodynamic model in which OIB and intermediate magmas derived from deep subslab asthenospheric mantle did uprise through a tear-in-the-slab, which formed when the southernmost segments of the SCR collided with the Chile Trench around 15 Ma. During their ascent, they interacted with the Patagonian supraslab mantle and, locally, with slivers of subducted Pacific oceanic crust that contributed to the geochemical signature of the intermediate basalts.     

Seismic properties of lower crustal xenoliths from El Hoyazo (SE Spain): Experimental evidence up to partial melting

Seismic techniques provide unique tools to investigate the structure and, in combination with petrological, geochemical and petrophysical study, the composition of the lower crust. Controversies can be solved with comparative study of metamorphic terrains or xenoliths that occur adjacent to areas where seismic refraction/reflection data are available. Xenoliths represent a direct sampling of the inaccessible lower crust at the time of the volcanism, whilst exposed crustal sections can only be used as analogue of present day lower crust.The present study is focused on the measurements of compressional wave velocities up to conditions exceeding the beginning of melting (950 °C at 500 MPa confining pressure) on three garnet–biotite–sillimanite metapelitic xenoliths recovered from the Neogene dacites of El Hoyazo (SE Spain). They preserve widespread interstitial rhyolitic glass as evidence of primary melt extraction and represent the best example of partially molten lower crust in the Alborán Domain. The influence of glass on Vp is primarily reflected by anomalous positive dVp/dT while heating with velocity increasing at 500 MPa from 4.98 to 5.50 km s^− 1 at room temperature to 5.85–6.79 km s^− 1 at 650–700 °C. This corresponds to the glass transition where all the grain boundaries and most of the pores within the glass are closed. After this point, the velocity decreases to 6.2–6.5 km s^− 1 at 950 °C where re-melting of the glass is achieved and additional partial melt produced. On cooling, the behavior is normal with negative dVp/dT. After the thermal treatment velocities are 30% higher (6.07–7.21 km s^− 1) and reveal that in the presence of intergranular melt velocity measurements at room temperature cannot be extrapolated to high temperatures.P-waves measured at melting conditions are in agreement with deep seismic refraction data and tomography in the area and corroborate the hypothesis that partial melts are actually present in Alborán lower crust.