Suevite breccia from the Ries crater,Germany: Origin,cooling history and devitrification of impact glasses

Abstract— The distribution and petrography of surficial suevite breccias of the Ries impact crater in Southern Germany are reviewed, and the morphology, petrography and chemical composition of impact glasses in suevite breccias and their postdepositional devitrification is synthesized. Origin and thermal history of suevite breccia and suevite glasses are inferred from these data and from recent results of cooling and crystallization experiments with suevite glass melts under controlled conditions. In a montmorillonitic groundmass, the suevite breccia contains pieces of glass, up to some decimeters in size, and crystalline rock clasts of all stages of shock metamorphism. The glass particles originated in impact melt of basement gneisses and cooled by adiabatic pressure release from ～80 GPa to atmospheric pressure during ejection from the crater. They were deposited on the ground together with the other suevite components at a temperature of ～750 °C. Fractured glass pieces in the breccia show that during deposition of the suevite the temperature was below the temperature at which undercooled melt transforms to rigid glass. The suevite cooled after deposition mainly by convection of heat by emanating gases and vapors. In chilled layers at the base and at the top of suevite deposits, the glasses are preserved in vitreous state. Between these zones, the glasses were devitrified, yet crystallization of pyroxene, plagioclase and magnetite took place below the glass-transformation temperature. Annealing experiments show that this unusual devitrification below the transformation temperature can be explained by the impact origin of suevite glasses. Due to rapid adiabatic cooling on decompression, the glasses were oversaturated with water and internally strained. Under these conditions, devitrification, especially the formation of plagioclase, was possible at temperatures below the transformation range. The origin from adiabatically cooled impact melt of deep-seated rocks distinguishes water-bearing suevite glasses from the Ries-derived, water-free moldavite tektites, which are interpreted as condensates of vaporized, surficial sediments (Engelhardt et al., 1987).     

Coesite in suevites from the Chesapeake Bay impact structure

The occurrence of coesite in suevites from the Chesapeake Bay impact structure is confirmed within a variety of textural domains in situ by Raman spectroscopy for the first time and in mechanically separated grains by X‐ray diffraction. Microtextures of coesite identified in situ investigated under transmitted light and by scanning electron microscope reveal coesite as micrometer‐sized grains (1–3 μm) within amorphous silica of impact‐melt clasts and as submicrometer‐sized grains and polycrystalline aggregates within shocked quartz grains. Coesite‐bearing quartz grains are present both idiomorphically with original grain margins intact and as highly strained grains that underwent shock‐produced plastic deformation. Coesite commonly occurs in plastically deformed quartz grains within domains that appear brown (toasted) in transmitted light and rarely within quartz of spheroidal texture. The coesite likely developed by a mechanism of solid‐state transformation from precursor quartz. Raman spectroscopy also showed a series of unidentified peaks associated with shocked quartz grains that likely represent unidentified silica phases, possibly including a moganite‐like phase that has not previously been associated with coesite.     

Weathering features in shocked quartz from the Ries impact crater,Germany

Abstract— Shocked quartz from the ejecta of the Ries impact structure has been investigated by analytical transmission electron microscopy (ATEM). Quartz grains display numerous planar fractures (PFs) and planar deformation features (PDFs). Both are partly or fully replaced by a mineral of the kaolinite group (likely halloysite). Its formation involves fluid circulation into the dense fracture networks, dissolution and removal of the amorphous phase initially present in PDFs, and finally, precipitation and crystallization of the kaolinite group mineral from solutions resulting from the chemical alteration of adjacent minerals (feldspars and biotite). Kaolinite group minerals are typical of hydrothermal alteration at low temperature, in humid climate, and under moderately acid conditions and, thus, this alteration may not be directly related to the impact event itself. However, the weathering features were strongly enhanced by the shock‐generated microstructure, in particular by fractures that provided pathways for fluid circulation.     

Coesite in suevite from the Ries impact structure (Germany): From formation to postshock evolution

Coesite is one of the most common and abundant high‐pressure phases occurring in impactites. The mechanism of formation of coesite and its postshock evolution is revisited in this paper based on Raman microspectroscopy, and scanning and transmission electron microscopy of a coesite‐bearing suevite from the Ries impact structure. Our data indicate that coesite forms through a single process, i.e., by crystallization from high‐pressure silica melt, and that its formation is related to fluid inclusions in precursor quartz. During the postshock phase, coesite aggregates are partially modified by annealing and interactions with fluids. In an early stage of the postshock evolution, coesite is back‐transformed to quartz and the surrounding diaplectic glass devitrifies into β‐cristobalite, which transforms into α‐cristobalite and then into microcrystalline quartz during subsequent stages of the postshock evolution. Altogether these postshock modifications result in a significant volume loss and extensional fracturing. During a late postshock stage, the fractures are filled with clay minerals due to circulation of hydrothermal fluids.     

Evidence for a spatially extensive hydrothermal system at the Ries impact structure,Germany

The ~15 Ma, 26 km diameter Ries impact structure in south‐central Germany was one of the first terrestrial impact structures where evidence of impact‐associated hydrothermal alteration was recognized. Previous studies suggested that pervasive, high‐temperature hydrothermal activity was restricted to the area within the “inner ring” (i.e., the crater‐fill impactite units). Here we present mineralogical evidence for localized hydrothermal activity in the ejecta beyond the crater rim in two previously unstudied settings: a pervasively altered lens of suevite ejecta directly overlying the Bunte Breccia at the Aumühle quarry; and suevite ejecta at depth overlain by ~20 m of lacustrine sediments sampled by the Wörnitzostheim 1965 drill core. A comprehensive set of X‐ray diffraction analyses indicates five distinct alteration regimes (1) surficial ambient weathering characterized by smectite and a minor illitic component; (2) locally restricted hydrothermal activity characterized by an illitic component and minor smectite; (3) hydrothermal activity at depth characterized by smectite, a minor illitic component, and calcite; (4) hydrothermal activity at depth characterized by smectite, a minor illitic component, calcite, zeolites, and clinochlore; and (5) pervasive hydrothermal activity at depth characterized by smectite, a minor illitic component, and minor clinochlore. These data spatially extend the Ries postimpact hydrothermal system suggesting a much more extensive, complex, and dynamic system than previously thought. Constraining the mineralogical alteration regimes at the Ries impact structure may also further our understanding of impact‐associated phyllosilicate formation on Mars with implications for climate models and habitability.     

Carbonate-silicate liquid immiscibility upon impact melting: Ries Crater,Germany

Abstract— The 24 km diameter Ries impact crater in southern Germany is one of the most studied impact structures on Earth. The Ries impactor struck a Triassic to Upper Jurassic sedimentary sequence overlying Hercynian crystalline basement. At the time of impact (14.87 × 0.36 Ma; Storzer et al., 1995), the 350 m thick Malm limestone was present only to the south and east of the impact site. To the north and west, the Malm had been eroded away, exposing the underlying Dogger and Lias. The largest proportion of shocked target material is in the impact-melt-bearing breccia suevite. The suevite had been believed to be derived entirely from the crystalline basement. Calcite in the suevite has been interpreted as a postimpact hydrothermal deposit. From optical inspection of 540 thin sections of suevite from 32 sites, I find that calcite in the suevite shows textural evidence of liquid immiscibility with the silicate impact melt. Textural evidence of liquid immiscibility between silicate and carbonate melt in the Ries suevite includes carbonate globules within silicate glass, silicate globules embedded in carbonate, deformable and coalescing carbonate spheres within silicate glass, sharp menisci or cusps and budding between silicate and carbonate melt, fluidal textures and gas vesicles in carbonate schlieren, a quench crystallization sequence of the carbonate, spinifex textured quenched carbonate, separate carbonate spherules in the suevite mineral-fragment matrix, and inclusions of mineral fragments suspended in carbonate blebs. Given this evidence of liquid immiscibility, the carbonate in the suevite therefore has—like the silicate melt—a primary origin by impact-shock melting. Evidence of carbonate-silicate liquid immiscibility is abundant in the suevites from the southwest to east of the Ries crater. The rarer suevites to the west to northeast of the crater are nearly devoid of carbonate melts. This correspondence between the occurrence of outcropping limestones at the target surface and the formation of carbonate melt indicates that the Malm limestones are the source rocks of the carbonate impact melt. This correspondence shows that the suevites preserve a compositional memory of their source rocks. From the regional distribution of suevites with or without immiscible carbonate melts, it is inferred that the Ries impactor hit the steep Albtrauf escarpment at its toe, in an oblique impact from the north.     

Multiple fluvial reworking of impact ejecta—A case study from the Ries crater,southern Germany

Abstract— Impact ejecta eroded and transported by gravity flows, tsunamis, or glaciers have been reported from a number of impact structures on Earth. Impact ejecta reworked by fluvial processes, however, are sparsely mentioned in the literature. This suggests that shocked mineral grains and impact glasses are unstable when eroded and transported in a fluvial system. As a case study, we here present a report of impact ejecta affected by multiple fluvial reworking including rounded quartz grains with planar deformation features and diaplectic quartz and feldspar glass in pebbles of fluvial sandstones from the “Monheimer Höhensande” ?10 km east of the Ries crater in southern Germany.     

New evidence for persistent impact‐generated hydrothermal activity in the Miocene Ries impact structure,Germany

The extent of impact‐generated hydrothermal activity in the 24 km sized Ries impact structure has been controversially discussed. To date, mineralogical and isotopic investigations point to a restriction of hydrothermal activity to the impact‐melt bearing breccias, specifically the crater‐fill suevite. Here, we present new petrographic, geochemical, and isotopic data of postimpact carbonate deposits, which indicate a hydrothermal activity more extended than previously assumed. Specifically, carbonates of the Erbisberg, a spring mound located upon the inner crystalline ring of the crater, show travertine facies types not seen in any of the previously investigated sublacustrine soda lake spring mounds of the Ries basin. In particular, the streamer carbonates, which result from the encrustation of microbial filaments in subaerial spring effluents between 60 and 70 °C, are characteristic of a hydrothermal origin. While much of the primary geochemical and isotopic signatures in the mound carbonates have been obliterated by diagenesis, a postimpact calcite vein from brecciated gneiss of the subsurface crater floor revealed a flat rare earth element pattern with a clear positive Eu anomaly, indicating a hydrothermal fluid convection in the crater basement. Finally, the strontium isotope stratigraphic correlation of the travertine mound with the crater basin succession suggests a hydrothermal activity for about 250,000 yr after the impact, which would be much longer than previously assumed.     

Shocked rocks and impact glasses from the El'gygytgyn impact structure,Russia

Abstract— The El'gygytgyn impact structure is about 18 km in diameter and is located in the central part of Chukotka, arctic Russia. The crater was formed in volcanic rock strata of Cretaceous age, which include lava and tuffs of rhyolites, dacites, and andesites. A mid‐Pliocene age of the crater was previously determined by fission track (3.45 ± 0.15 Ma) and ⁴⁰Ar/³⁹Ar dating (3.58 ± 0.04 Ma). The ejecta layer around the crater is completely eroded. Shock‐metamorphosed volcanic rocks, impact melt rocks, and bomb‐shaped impact glasses occur in lacustrine terraces but have been redeposited after the impact event. Clasts of volcanic rocks, which range in composition from rhyolite to dacite, represent all stages of shock metamorphism, including selective melting and formation of homogeneous impact melt. Four stages of shocked volcanic rocks were identified: stage I (≤35 GPa; lava and tuff contain weakly to strongly shocked quartz and feldspar clasts with abundant PFs and PDFs; coesite and stishovite occur as well), stage II (35–45 GPa; quartz and feldspar are converted to diaplectic glass; coesite but no stishovite), stage III (45–55 GPa; partly melted volcanic rocks; common diaplectic quartz glass; feldspar is melted), and stage IV (>55 GPa; melt rocks and glasses). Two main types of impact melt rocks occur in the crater: 1) impact melt rocks and impact melt breccias (containing abundant fragments of shocked volcanic rocks) that were probably derived from (now eroded) impact melt flows on the crater walls, and 2) aerodynamically shaped impact melt glass “bombs” composed of homogeneous glass. The composition of the glasses is almost identical to that of rhyolites from the uppermost part of the target. Cobalt, Ni, and Ir abundances in the impact glasses and melt rocks are not or only slightly enriched compared to the volcanic target rocks; only the Cr abundances show a distinct enrichment, which points toward an achondritic projectile. However, the present data do not allow one to unambiguously identify a meteoritic component in the El'gygytgyn impact melt rocks.     

Suevite breccia of the Ries impact crater,Germany: Petrography,chemistry and shock metamorphism of crystalline rock clasts

Abstract— Clasts of deep-seated crystalline basement rocks in suevites of the Ries crater, Germany, were catalogued lithologically and classified with regard to their degree of shock metamorphism. The sample suite consisted of 806 clasts from 10 outcrops in fallout suevites and 447 clasts from drill cores encountering crater suevite in the crater interior. These clasts can be grouped into seven types of metamorphic and nine types of igneous rocks. One hundred forty-three clasts, representing these lithologies, were analyzed for major element bulk composition. The fallout suevite contains on average 4 vol% of crystalline basement clasts, 0.4 vol% of sedimentary rocks, 16 vol% of glass bodies (some of them aerodynamically shaped), and 79 vol% of groundmass. On average, 52% of all crystalline clasts are from metamorphic sources and 42% are of igneous origin. Using the shock classification of Stöffler (1974), 8% of all crystalline clasts appear unshocked (<10 Gpa), and 34, 30 and 27% of clasts are shocked to stages I (10–35 Gpa), II (35–45 GPa) and III (45–60 GPa), respectively. The bulk composition of suevite glasses is consistent with the modal proportions of crystalline rock types observed in the clast populations. This indicates that the glasses originate by shock-fusion of a similarly composed basement. The crater suevite contains the same crystalline rock types that occur in the fallout suevites. The bore hole “Nördlingen 1973” yields an average of 62 vol% metamorphic and 38 vol% igneous rocks. The crater suevite differs from fallout suevites by a higher clast/glass ratio, by preponderance (65–95%) of clasts shocked to stage I only, and by the absence of aerodynamically shaped glass bodies. The source of crystalline clasts and melt particles of suevites is a volume of rocks, located deep in the crystalline basement, to which the projectile transmittted most of its energy so that only rocks of the basement were shocked by pressures exceeding 10 GPa (deep-burst impact model). Fallout suevites were ejected, propelled by an expanding plume of vaporized rock, and withdrew preferentially from this volume melt and highly shocked clasts, leaving in the transient cavity the crater suevite with more clasts of modest shock levels and less melt.     

Geochemical studies of the SUBO 18 (Enkingen) drill core and other impact breccias from the Ries crater,Germany

Suevite and melt breccia compositions in the boreholes Enkingen and Polsingen are compared with compositions of suevites from other Ries boreholes and surface locations and discussed in terms of implications for impact breccia genesis. No significant differences in average chemical compositions for the various drill cores or surface samples are noted. Compositions of suevite and melt breccia from southern and northeastern sectors of the Ries crater do not significantly differ. This is in stark contrast to the published variations between within‐crater and out‐of‐crater suevites from northern and southern sectors of the Bosumtwi impact structure, Ghana. Locally occurring alteration overprint on drill cores—especially strong on the carbonate‐impregnated suevite specimens of the Enkingen borehole—does affect the average compositions. Overall, the composition of the analyzed impact breccias from Ries are characterized by very little macroscopically or microscopically recognized sediment‐clast component; the clast populations of suevite and impact melt breccia are dominated consistently by granitic and intermediate granitoid components. The Polsingen breccia is significantly enriched in a dioritic clast component. Overall, chemical compositions are of intermediate composition as well, with dioritic‐granodioritic silica contents, and relatively small contributions from mafic target components. Selected suevite samples from the Enkingen core have elevated Ni, Co, Cr, and Ir contents compared with previously analyzed suevites from the Ries crater, which suggest a small meteoritic component. Platinum‐group element (PGE) concentrations for some of the enriched samples indicate somewhat elevated concentrations and near‐chondritic ratios of the most immobile PGE, consistent with an extraterrestrial contribution of 0.1–0.2% chondrite‐equivalent.     

Heterogeneity of melts in impact deposits and implications for their origin (Ries suevite,Germany)

Impact melt‐bearing clastic deposits (suevites) are one of the most important records of the impact cratering process. A deeper understanding of their composition and formation is therefore essential. This study focuses on impact melt particles in suevite at Ries, Germany. Textures and chemical evidence indicate that the suevite contains three melt types that originate from different shock levels in the target. The most abundant melt type (“melt type 1”) represents well‐mixed whole‐rock melting of crystalline basement and includes incompletely mixed mafic melt schlieren (“melt type 1 mafic”). Polymineralic melt type 2 comprises mixes between monomineralic melt types 3 and melt type 1. Melt types 2 and 3 are located within melt type 1 as small patches or schlieren but also isolated within the suevite matrix. The main melt type 1 is heterogeneous with respect to trace elements, varying geographically around the crater: in the western sector, it has lower values in trace elements, e.g., Ba, Zr, Th, and Ce, than in the eastern sector. The west–east zoning likely reflects the heterogeneous nature of crystalline basement target rocks with lower trace element contents, e.g., Ba, Zr, Th, and Ce, in the west compared to the east. The chemical zoning pattern of suevite melt type 1 indicates that mixing during ejection and emplacement occurred only on a local (hundreds of meters) scale. The incomplete larger scale mixing indicated by the preservation of these local chemical signatures, and schlieren corroborate the assumption that mixing, ejection, and quenching were very rapid, short‐lived processes.     

The search for fullerenes in rocks from the Ries impact crater

Abstract— Since their discovery, fullerenes have been reported from various geological environments. One group of these findings has been related to bolide impacts, e.g., the Sudbury crater and the K‐T and P‐T boundaries. Impact rocks of the Ries crater, Germany, including samples of suevites, metamorphosed crystalline clasts, and glass bombs, have been collected in the Otting, Altebürg, and Seelbronn quarries. No fullerenes in concentrations above 1 ppb have been found in analyzed samples. Laser desorption time‐of‐flight mass spectrometry (LD‐TOF‐MS) confirmed the absence of fullerenes in the analyzed samples. These results support the concept that the Ries impactor was a stony meteorite.     

Simulation of trajectories and maximum reach of distal impact ejecta under terrestrial conditions: Consequences for the Ries crater, southern Germany

For impact craters with dimensions such as the Ries crater (corresponding to a 1 km meteorite) it has become a standard reference in textbooks on planetary science that under terrestrial conditions distal transfer of boulders may reach as far as 200 km. In order to test this assumption we simulated the impact-induced ballistic transfer of limestone boulders ejected out of the Ries crater and have come to the conclusion that “Reutersche Blöcke” and “Ries-Brockhorizonte,” found at distances of up to 130 km away, are distal Ries ejecta. Boulders alleged to be Ries components found in Northern Switzerland at distances of up to 200 km away can be related to the Ries event, if the parameters of our numerical simulation are stretched to its limits. Our simulation includes the following assumptions and variables: (1) boulders are ejected from the interference zone at a very early stage of impact; (2) starting conditions may range between velocities of 1 and 4 km/s and 35° to 65° for the flight path angle; (3) drag-free and transitional conditions at the impact site have been incorporated into the density model of the atmosphere; (4) a typical boulder is represented by an suitable aerodynamic drag model; (5) an aerothermal heat model was used to determine heat load.     

Shock re‐equilibration of fluid inclusions in crystalline basement rocks from the Ries crater,Germany

Abstract— This study examines the effects of shock metamorphism on fluid inclusions in crystalline basement target rocks from the Ries crater, Germany. The occurrence of two‐phase fluid inclusions decreases from shock stage 0 to shock stage 1, while single‐phase inclusions increase, likely as a result of re‐equilibration. In shock stages 2 and 3, both two‐phase and single‐phase inclusions decrease with increasing shock stage, indicating that fluid inclusion vesicles are destroyed due to plastic deformation and phase changes in the host minerals. However, quartz clasts entrained in shock stage 4 melts contain both single‐phase and two‐phase inclusions, demonstrating the rapid quenching of the melt and the heterogeneous nature of impact deformation. Inclusions in naturally shocked polycrystalline samples survive at higher shock pressures than those in single crystal shock experiments. However, fluid inclusions in both experimental and natural samples follow a similar trend in re‐equilibration at low to moderate shock pressures leading to destruction of inclusion vesicles in higher shock stages. This suggests that shock processing may lead to the destruction of fluid inclusions in many planetary materials and likely contributed to shock devolatilization of early planetesimals.     

The distribution of megablocks in the Ries crater,Germany: Remote sensing,field investigation,and statistical analyses

The Ries crater is a well‐preserved, complex impact crater that has been extensively used in the study of impact crater formation processes across the solar system. However, its geologic structure, especially the megablock zone, still poses questions regarding crater formation mechanics. The megablock zone, located between the inner crystalline ring and outer, morphologic crater rim, consists of allochthonous crystalline and sedimentary blocks, Bunte Breccia deposits, patches of suevite, and parautochthonous sedimentary blocks that slumped into the crater during crater modification. Our remote sensing detection method in combination with a shallow drilling campaign and geoelectric measurements at two selected megablocks proved successful in finding new megablock structures (>25 m mean diameter) within the upper approximately 1.5 m of the subsurface in the megablock zone. We analyzed 1777 megablocks of the megablock zone, 81 of which are new discoveries. In our statistical analysis, we also included 2318 ejecta blocks >25 m beyond the crater rim. Parautochthonous megablocks show an increase in total area and size toward the final crater rim. The sizes of allochthonous megablocks generally decrease with increasing radial range, but inside the megablock zone, the coverage with postimpact sediments obscures this trend. The size‐frequency distribution of all megablocks obeys a power‐law distribution with an exponent between approximately ?1.7 and ?2.3. We estimated a total volume of 95 km³ of Bunte Breccia and 47 km³ of megablocks. Ejecta volume calculations and a palinspastic restoration of the extension within the megablock zone indicate that the transient cavity diameter was probably 14–15 km.     

Impact melt rocks from the Late Paleocene Hiawatha impact structure,northwest Greenland

Impact melt rocks formed during hypervelocity impact events are ideal for studying impact structures. Here, we describe impact melt rock samples collected proximal to the 31 km wide 58 Ma Hiawatha impact structure, northwest Greenland, which is completely covered by the Greenland Ice Sheet. The melt rocks contain diagnostic shock indicators (e.g., planar deformation features [PDF] in quartz and shocked zircon) and form three groups based on melt textures and chemistry: (i) hypocrystalline, (ii) glassy, and (iii) carbonate-based melt rocks. The exposed foreland directly in front of the structure consists of metasedimentary successions and igneous plutons; however, the carbonate-based impactites indicate a mixed target sequence with a significant carbonate-rich component. Well-preserved organic material in some melt rocks indicates that North Greenland at the time of impact was host to abundant organic material, likely a dense high-latitude temperate forest. Geochemical signatures of platinum-group elements in selected samples indicate an extraterrestrial component and support previous identification of a highly fractionated iron impactor in glaciofluvial sand. Our results illustrate the possibility to study impact structures hidden beneath a thick ice sheet based on transported samples and this opens a new avenue for identifying other potential impact craters in Greenland and Antarctica.     

40Ar‐39Ar step‐heating of impact glasses from the Nördlinger Ries impact crater—Implications on excess argon in impact melts and tektites

Seven impact melts from various places in the Nördlinger Ries were dated by ⁴⁰Ar‐³⁹Ar step‐heating. The aim of these measurements was to increase the age data base for Ries impact glasses directly from the Ries crater, because there is only one Ar‐Ar step‐heating spectrum available in the literature. Almost all samples display saddle‐shaped age spectra, indicating the presence of excess argon in most Ries glass samples, most probably inherited argon from incompletely degassed melt and possibly also excess argon incorporated during cooling from adjacent phases. In contrast, moldavites usually contain no inherited argon, probably due to their different formation process implying solidification during ballistic transport. The plateau age of the only flat spectrum is 14.60 ± 0.16 (0.20) Ma (2σ), while the total age of this sample is 14.86 ± 0.20 (0.22) Ma (isochron age: 14.72 ± 0.18 [0.22] Ma [2σ]), proofing the chronological relationship of the Ries impact and moldavites. The total ages of the other samples range between 15.77 ± 0.52 and 20.4 ± 1.0 Ma (2σ), implying approximately 2–40% excess ⁴⁰Ar (compared to the nominal age of the Ries crater) in respective samples. Thus, the age of 14.60 ± 0.16 (0.20) (2σ) (14.75 ± 0.16 [0.20 Ma] [2σ], calculated using the most recent suggestions for the K decay constants) can be considered as reliable and is within uncertainties indistinguishable from the most recent compilation for the age of the moldavite tektites.     

The Erbisberg drilling 2011: Implications for the structure and postimpact evolution of the inner ring of the Ries impact crater

The 26 km diameter Nördlinger Ries is a complex impact structure with a ring structure that resembles a peak ring. A first research drilling through this “inner crystalline ring” of the Ries was performed at the Erbisberg hill (SW Ries) to better understand the internal structure and lithology of this feature, and possibly reveal impact‐induced hydrothermal alteration. The drill core intersected the slope of a 22 m thick postimpact travertine mound, before entering 42 m of blocks and breccias of crystalline rocks excavated from the Variscan basement at >500 m depth. Weakly shocked gneiss blocks that show that shock pressure did not exceed 5 GPa occur above polymict lithic breccias of shock stage Ia (10–20 GPa), with planar fractures and planar deformation features (PDFs) in quartz. Only a narrow zone at 49.20–50.00 m core depth exhibits strong mosaicism in feldspar and {102} PDFs in quartz, which are indicative of shock stage Ib (20–35 GPa). Finally, 2 m of brecciated Keuper sediments at the base of the section point to an inverse layering of strata. While reverse grading of clast sizes in lithic breccias and gneiss blocks is consistent with lateral transport, the absence of diaplectic glass and melt products argues against dynamic overthrusting of material from a collapsing central peak, as seen in the much larger Chicxulub structure. Indeed, weakly shocked gneiss blocks are rather of local provenance (i.e., the transient crater wall), whereas moderately shocked polymict lithic breccias with geochemical composition and ⁸⁷Sr/⁸⁶Sr signature similar to Ries suevite were derived from a position closer to the impact center. Thus, the inner ring of the Ries is formed by moderately shocked polymict lithic breccias likely injected into the transient crater wall during the excavation stage and weakly shocked gneiss blocks of the collapsing transient crater wall that were emplaced during the modification stage. While the presence of an overturned flap is not evident from the Erbisberg drilling, a survey of all drillings at or near the inner ring point to inverted strata throughout its outer limb. Whether the central ring of the Ries represents remains of a collapsed central peak remains to be shown. Postimpact hydrothermal alteration along the Erbisberg section comprises chloritization, sulfide veinlets, and strong carbonatization. In addition, a narrow zone in the lower parts of the polymict lithic breccia sequence shows a positive Eu anomaly in its carbonate phase. The surface expression of this hydrothermal activity, i.e., the travertine mound, comprises subaerial as well as subaquatic growth phases. Intercalated lake sediments equivalent to the early parts of the evolution of the central crater basin succession confirm a persistent impact‐generated hydrothermal activity, although for less time than previously suggested.