Northwest Africa 4797: A strongly shocked ultramafic poikilitic shergottite related to compositionally intermediate Martian meteorites

Abstract– Northwest Africa (NWA) 4797 is an ultramafic Martian meteorite composed of olivine (40.3 vol%), pigeonite (22.2%), augite (11.9%), plagioclase (9.1%), vesicles (1.6%), and a shock vein (10.3%). Minor phases include chromite (3.4%), merrillite (0.8%), and magmatic inclusions (0.4%). Olivine and pyroxene compositions range from Fo_66–72,En_58–74Fs_19–28Wo_6–15, and En_46–60Fs_14–22Wo_34–40, respectively. The rock is texturally similar to “lherzolitic” shergottites. The oxygen fugacity was QFM?2.9 near the liquidus, increasing to QFM?1.7 as crystallization proceeded. Shock effects in olivine and pyroxene include strong mosaicism, grain boundary melting, local recrystallization, and pervasive fracturing. Shock heating has completely melted and vesiculated igneous plagioclase, which upon cooling has quench‐crystallized plagioclase microlites in glass. A mm‐size shock melt vein transects the rock, containing phosphoran olivine (Fo_69–79), pyroxene (En_44–51Fs_14–18Wo_30–42), and chromite in a groundmass of alkali‐rich glass containing iron sulfide spheres. Trace element analysis reveals that (1) REE in plagioclase and the shock melt vein mimics the whole rock pattern; and (2) the reconstructed NWA 4797 whole rock is slightly enriched in LREE relative to other intermediate ultramafic shergottites, attributable to local mobilization of melt by shock. The shock melt vein represents bulk melting of NWA 4797 injected during pressure release. Calculated oxygen fugacity for NWA 4797 indicates that oxygen fugacity is decoupled from incompatible element concentrations. This is attributed to subsolidus re‐equilibration. We propose an alternative nomenclature for “lherzolitic” shergottites that removes genetic connotations. NWA 4797 is classified as an ultramafic poikilitic shergottite with intermediate trace element characteristics.     

Localized shock melting in lherzolitic shergottite Northwest Africa 1950: Comparison with Allan Hills 77005

Abstract— The lherzolitic Martian meteorite Northwest Africa (NWA) 1950 consists of two distinct zones: 1) low‐Ca pyroxene poikilically enclosing cumulate olivine (Fo_70–75) and chromite, and 2) areas interstitial to the oikocrysts comprised of maskelynite, low‐ and high‐Ca pyroxene, cumulate olivine (Fo_68–71) and chromite. Shock metamorphic effects, most likely associated with ejection from the Martian subsurface by large‐scale impact, include mechanical deformation of host rock olivine and pyroxene, transformation of plagioclase to maskelynite, and localized melting (pockets and veins). These shock effects indicate that NWA 1950 experienced an equilibration shock pressure of 35–45 GPa. Large (millimeter‐size) melt pockets have crystallized magnesian olivine (Fo_78–87) and chromite, embedded in an Fe‐rich, Al‐poor basaltic to picro‐basaltic glass. Within the melt pockets strong thermal gradients (minimum 1 °C/μm) existed at the onset of crystallization, giving rise to a heterogeneous distribution of nucleation sites, resulting in gradational textures of olivine and chromite. Dendritic and skeletal olivine, crystallized in the melt pocket center, has a nucleation density (1.0 × 10³ crystals/mm²) that is two orders of magnitude lower than olivine euhedra near the melt margin (1.6 × 10⁵ crystals/mm²). Based on petrography and minor element abundances, melt pocket formation occurred by in situ melting of host rock constituents by shock, as opposed to melt injected into the lherzolitic target. Despite a common origin, NWA 1950 is shocked to a lesser extent compared to Allan Hills (ALH) 77005 (45–55 GPa). Assuming ejection in a single shock event by spallation, this places NWA 1950 near to ALH 77005, but at a shallower depth within the Martian subsurface. Extensive shock melt networks, the interconnectivity between melt pockets, and the ubiquitous presence of highly vesiculated plagioclase glass in ALH 77005 suggests that this meteorite may be transitional between discreet shock melting and bulk rock melting.     

Magmatic inclusions and felsic clasts in the Dar al Gani 319 polymict ureilite

Abstract— Magmatic inclusions occur in type II ureilite clasts (olivine‐orthopyroxene‐augite assemblages with essentially no carbon) and in a large isolated plagioclase clast in the Dar al Gani (DaG) 319 polymict ureilite. Type I ureilite clasts (olivine‐pigeonite assemblages with carbon), as well as other lithic and mineral clasts in this meteorite, are described in Ikeda et al.(2000). The magmatic inclusions in the type II ureilite clasts consist mainly of magnesian augite and glass. They metastably crystallized euhedral pyroxenes, resulting in feldspar component‐enriched glass. On the other hand, the magmatic inclusions in the large plagioclase clast consist mainly of pyroxene and plagioclase, with a mesostasis. They crystallized with a composition along the cotectic line between the pyroxene and plagioclase liquidus fields. DaG 319 also contains felsic lithic clasts that represent various types of igneous lithologies. These are the rare components not found in the common monomict ureilites. Porphyritic felsic clasts, the main type, contain phenocrysts of plagioclase and pyroxene, and their groundmass consists mainly of plagioclase, pyroxene, and minor phosphate, ilmenite, chromite, and/or glass. Crystallization of these porphyritic clasts took place along the cotectic line between the pyroxene and plagioclase fields. Pilotaxitic felsic clasts crystallized plagioclase laths and minor interstitial pyroxene under metastable conditions, and the mesostasis is extremely enriched in plagioclase component in spite of the ubiquitous crystallization of plagioclase laths in the clasts. We suggest that there are two crystallization trends, pyroxene‐metal and pyroxene‐plagioclase trends, for the magmatic inclusions and felsic lithic clasts in DaG 319. The pyroxene‐metal crystallization trend corresponds to the magmatic inclusions in the type II ureilite clasts and the pilotaxitic felsic clasts, where crystallization took place under reducing and metastable conditions, suppressing precipitation of plagioclase. The pyroxene‐plagioclase crystallization trend corresponds to the magmatic inclusions in the isolated plagioclase clast and the porphyritic felsic clasts. This trend developed under oxidizing conditions in magma chambers within the ureilite parent body. The felsic clasts may have formed mainly from albite component‐rich silicate melts produced by fractional partial melting of chondritic precursors. The common monomict ureilites, type I ureilites, may have formed by the fractional partial melting of alkali‐bearing chondritic precursors. However, type II ureilites may have formed as cumulates from a basaltic melt.     

Impact melting of the largest known enstatite meteorite: Al Haggounia 001, a fossil EL chondrite

Al Haggounia 001 and paired specimens (including Northwest Africa [NWA] 2828 and 7401) are part of a vesicular, incompletely melted, EL chondrite impact melt rock with a mass of ~3 metric tons. The meteorite exhibits numerous shock effects including (1) development of undulose to weak mosaic extinction in low‐Ca pyroxene; (2) dispersion of metal‐sulfide blebs within silicates causing “darkening”; (3) incomplete impact melting wherein some relict chondrules survived; (4) vaporization of troilite, resulting in S₂ bubbles that infused the melt; (5) formation of immiscible silicate and metal‐sulfide melts; (6) shock‐induced transportation of the metal‐sulfide melt to distances >10 cm; (7) partial resorption of relict chondrules and coarse silicate grains by the surrounding silicate melt; (8) crystallization of enstatite in the matrix and as overgrowths on relict silicate grains and relict chondrules; (9) crystallization of plagioclase from the melt; and (10) quenching of the vesicular silicate melt. The vesicular samples lost almost all of their metal during the shock event and were less susceptible to terrestrial weathering; in contrast, the samples in which the metal melt accumulated became severely weathered. Literature data indicate the meteorite fell ~23,000 yr ago; numerous secondary phases formed during weathering. Both impact melting and weathering altered the meteorite's bulk chemical composition: e.g., impact melting and loss of a metal‐sulfide melt from NWA 2828 is responsible for bulk depletions in common siderophile elements and in Mn (from alabandite); weathering of oldhamite caused depletions in many rare earth elements; the growth of secondary phases caused enrichments in alkalis, Ga, As, Se, and Au.     

Petrogenesis of ungrouped enstatite meteorite Zakłodzie: Fabric,texture, and nanostructure analysis for identification of mechanisms responsible for chondrite–achondrite transition

Zak?odzie is an enstatite meteorite of unknown petrogenesis. Chemically, it resembles enstatite chondrites, but displays an achondrite‐like texture. Here we report on fabric and texture analyses of Zak?odzie utilizing X‐ray computed tomography and scanning electron microscopy and combine it with a nanostructural study of striated pyroxene by transmission electron microscopy. With this approach we identify mechanisms that led to formation of the texture and address the petrogenesis of the rock. Zak?odzie experienced a shock event in its early evolution while located at some depth inside a warm parent body. Shock‐related strain inverted pyroxene to the observed mixture of intercalated orthorhombic and monoclinic polymorphs. The heat that dissipated after the peak shock was added to primary, radiogenic‐derived heat and led to a prolonged thermal event. This caused local, equilibrium‐based partial melting of plagioclase and metal‐sulfide. Partial melting was followed by two‐stage cooling. The first phase of annealing (above 500 °C) allowed for crystallization of plagioclase and for textural equilibration of metal and sulfides with silicates. Below 500 °C, cooling was faster and more heterogeneous at cm scale, allowing retention of keilite and quenching of K‐rich feldspathic glass in some parts. Our study indicates that Zak?odzie is neither an impact melt rock nor a primitive achondrite, as suggested in former studies. An impact melt origin is excluded because enstatite in Zak?odzie was never completely melted and partial melting occurred during equilibrium‐based postshock conditions. Texturally, the rock represents a transition of chondrite and achondrite and was formed when early impact heat was added to internal radiogenic heat.     

Eutectic metal + troilite + Fe‐Mn‐Na phosphate + Al‐free chromite assemblage in shock‐produced chondritic melt of the Yanzhuang chondrite

An assemblage with FeNi metal, troilite, Fe‐Mn‐Na phosphate, and Al‐free chromite was identified in the metal‐troilite eutectic nodules in the shock‐produced chondritic melt of the Yanzhuang H6 meteorite. Electron microprobe and Raman spectroscopic analyses show that a few phosphate globules have the composition of Na‐bearing graftonite (Fe_,Mn,Na)₃(PO₄)₂, whereas most others correspond to Mn‐bearing galileiite Na(Fe,Mn)₄(PO₄)₃ and a possible new phosphate phase of Na₂(Fe,Mn)₁₇(PO₄)₁₂ composition. The Yanzhuang meteorite was shocked to a peak pressure of 50 GPa and a peak temperature of approximately 2000 °C. All minerals were melted after pressure release to form a chondritic melt due to very high postshock heat that brought the chondrite material above its liquidus. The volatile elements P and Na released from whitlockite and plagioclase along with elements Cr and Mn released from chromite are concentrated into the shock‐produced Fe‐Ni‐S‐O melt at high temperatures. During cooling, microcrystalline olivine and pyroxene first crystallized from the chondritic melt, metal‐troilite eutectic intergrowths, and silicate melt glass finally solidified at about 950–1000 °C. On the other hand, P, Mn, and Na in the Fe‐Ni‐S‐O melt combined with Fe and crystallized as Fe‐Mn‐Na phosphates within troilite, while Cr combined with Fe and crystallized as Al‐free chromite also within troilite.     

Martian meteorite Tissint records unique petrogenesis among the depleted shergottites

Tissint, a new unaltered piece of Martian volcanic materials, is the most silica‐poor and Mg‐Fe‐rich igneous rock among the “depleted” olivine‐phyric shergottites. Fe‐Mg zoning of olivine suggests equilibrium growth (<0.1 °C h^?1) in the range of Fo_80–56 and olivine overgrowth (Fo_55–18) through a process of rapid disequilibrium (~1.0–5.0 °C h^?1). The spatially extended (up to 600 μm) flat‐top Fe‐Mg profiles of olivine indicates that the early‐stage cooling rate of Tissint was slower than the other shergottites. The chemically metastable outer rim of olivine (55) consists of oscillatory phosphorus zoning at the impact‐induced melt domains and grew rapidly compared to the early to intermediate‐stage crystallization of the Tissint bulk. High‐Ca pyroxene to low‐Ca pyroxene and high‐Ca pyroxene to plagioclase ratios of Tissint are more comparable to the enriched basaltic and enriched olivine‐phyric shergottites. Dominance of augite over plagioclase induced augite to control the Ca‐buffer in the residual melt suppressing the plagioclase crystallization, which also caused a profound effect on the Al‐content in the late‐crystallized pyroxenes. Mineral chemical stability, phase‐assemblage saturation, and pressure–temperature path of evolution indicates that the parent magma entered the solidus and left the liquidus field at a depth of 40–80 km in the upper mantle. Petrogenesis of Tissint appears to be similar to LAR 06319, an enriched olivine‐phyric shergottite, during the early to intermediate stage of crystallization. A severe shock‐induced deformation resulted in remelting (10–15 vol%), recrystallization (most Fe‐rich phases), and exhumation of Tissint in a time scale of 1–8 yr. Tissint possesses some distinct characteristics, e.g., impact‐induced melting and deformation, forming phosphorus‐rich recrystallization rims of olivine, and shock‐induced melt domains without relative enrichment of LREEs compared to the bulk; and shared characteristics, e.g., modal composition and magmatic evolution with the enriched basaltic shergottites, evidently reflecting unique mantle source in comparison to the clan of the depleted members.     

Dhofar 081: A new lunar highland meteorite

Abstract— The lunar meteorite Dhofar 081, found as a single fragment of 174 g in the Dhofar region of Oman, is a shocked feldspathic fragmental highland breccia dominated by anorthosite‐rich lithic and mineral clasts embedded into a fine‐grained mostly shock melted clastic matrix. Major mineral phases in the bulk rock are Ca‐rich plagioclase (An_96.5–99.5), pyroxene (FS_21.9–46.2Wo_3.0–41.4), and olivine (Fa_29.3–47.8); accessory phases include Fe‐Ni metal, ilmenite, and Ti‐Cr‐rich spinel. Dhofar 081 contains subordinate crystalline fragments of large anorthosites, intersertal impact‐melt rocks, microporphyritic impact‐melt breccias, dark fine‐grained impact‐melt breccias, large cataclastic feldspars, and irregularly shaped brown glass clasts. Mafic components are rare and no genuine regolith components were found in the sections studied. Minerals in Dhofar 081 show homogeneously distributed shock features: intergranular recrystallization, strong fracturing and mosaicism in feldspar as well as a high density of mostly irregular fractures in pyroxene and olivine. Localized impact melting caused by one or several impacts led to a strong lithification. Based on these effects an equilibration shock pressure of about 15–20 GPa is estimated for the strongest shock event in Dhofar 081. Devitrification of the “glassy” material in the rock indicates thermal annealing after shock melting suggesting that the 15–20 GPa shock event predated the ejection event. According to the concentrations of implanted solar noble gases Dhofar 081 represents a polymict clastic breccia deposit with possibly a minor regolith component. A similar noble gas record of Dhofar 081 and MacAlpine Hills 88104/05 suggests the possibility of a source crater pairing of both meteorites. As indicated by noble gas measurements pairing of Dhofar 081 with the other lunar meteorites found in Oman, Dhofar 025 and Dhofar 026, is unlikely.     

Impact melting of lunar meteorite Dhofar 458: Evidence from polycrystalline texture and decomposition of zircon

Abstract– Dhofar 458 is a lunar meteorite consisting mainly of olivine‐plagioclase intergrowths, pyroxene‐plagioclase intergrowths, and plagioclase fragments. Pyroxene‐plagioclase globules are also common. In this study, we report the discovery of a polycrystalline zircon in this lunar meteorite. The polycrystalline zircon contains small vesicles and rounded baddeleyite grains at its margin. The polycrystalline and porous texture of the zircon indicates high‐pressure shock‐induced melting and degassing. Baddeleyite grains are derived from decomposition of zircon under high postshock temperature. The shock features in zircon indicates that the shock pressure in Dhofar 458 was greater than approximately 60 GPa and the postshock temperature greater than approximately 1700 °C. The polycrystalline and degassing texture and decomposition zircon also strongly indicates that Dhofar 458 is a clast‐rich impact melt rock. During this shock event, most components were melted and grains of mafic minerals are interstitial to lath‐like plagioclase grains. Large fragments of olivine and chromite also formed polycrystalline texture at margins and chemically reequilibrated with surrounding melts. We suggest that pyroxene‐plagioclase globules could be remains of melted target clasts, whereas vesicles may form during shock‐induced degassing of the rock. The U‐Pb isotopic data plot on a well‐defined discordant line, yielding the age of the zircon of 3434 ± 15 Ma (2σ). This age is interpreted as the time of the impact event that melted Dhofar 458 and caused decomposition and recrystallization of this zircon in Dhofar 458, which reset this zircon’s U‐Pb age.     

Pervasive shock melting at >65 GPa in a Martian basalt,the shergottite Northwest Africa 14672

Shergottites have provided abundant information on the volcanic and impact history of Mars. Northwest Africa (NWA) 14672 contributes to both of these aspects. It is a vesicular ophitic depleted olivine–phyric shergottite, with average plagioclase An₆₁Ab₃₉Or_0.2. It is highly ferroan, with pigeonite compositions En_49-25Fs_41-61Wo_10-14 like those of basaltic shergottites, for example, NWA 12335. Olivine (Fo_53-15) has discrete ferroan overgrowths, more ferroan when in contact with plagioclase than when enclosed by pyroxene. The pyroxene (a continuum of augite, subcalcic augite, and pigeonite) is patchy, with ragged “cores” enveloped or invaded by ferroan pyroxene. Magma mixing may be responsible for capture of olivine and formation of pyroxene mantles. The plagioclase is maskelynite-like in appearance, but the original laths were (congruently) melted and the melt partly crystallized as fine dendrites. Most of the 14% vesicles occur within plagioclase. Olivine, pyroxene, and ilmenite occur in part as fine aggregates crystallized after congruent melting with limited subsequent liquid mixing. There are two fine-grained melt components, barred plagioclase with interstitial Fe-bearing phases, and glass with olivine dendrites, derived by melting of mainly plagioclase and mainly pyroxene, respectively. Rare silica particles contain coesite and/or quartz, and silica glass. The rock has experienced >50% melting, compatible with peak pressure >~65 GPa. It is the most highly shocked shergottite so far, at shock stage S6/7. It may belong to the group of depleted shergottites ejected at ~1 Myr from Tooting Crater.     

Petrology of the Asuka 881931 ureilite with special reference to crystallization of interstitial silicate melt

Abstract— The Asuka 881931 meteorite is an unbrecciated ferroan ureilite and consists mainly of equi—granular olivine and pigeonite grains, a metal—sulfide network, interstitial silicates, and glass. Peripheral portions of equigranular olivine grains are often replaced by fine-grained forsterite—metal aggregates and sometimes by fine-grained enstatite—metal aggregates. These aggregates may have been produced from the equigranular olivine by reduction. Peripheral portions of equigranular pigeonite grains also are sometimes replaced by fine-grained orthopyroxene aggregates with tiny patches of Si-rich glass and may have been produced from the pigeonite by reduction reaction with silicate melt. Interstitial silicates are mainly orthopyroxene, magnesian pigeonite, high-Ca pyroxene (diopside/fassaite), and CaO-poor enstatite; and they crystallized from interstitial silicate melt. Interstitial glass is classified into two types—-Si-poor and Si-rich. The Si-poor glass is always in contact with equigranular olivine, but the Si-rich glass never contacts equigranular olivine and is in contact with pyroxene and the metal—sulfide network. Both types of glass were produced from an original interstitial silicate melt, but the Si-poor glass formed mainly by fractional crystallization of pyroxenes, and the Si-rich glass may have formed by addition of Si mainly from nearby metal—sulfide melt, as well as crystallization of pyroxenes. The Si-poor and Si-rich melts were finally quenched as interstitial glasses under rapid cooling conditions.     

Spade: An H chondrite impact‐melt breccia that experienced post‐shock annealing

Abstract— The low modal abundances of relict chondrules (1.8 vol%) and of coarse (i.e., ≥200 μm‐size) isolated mafic silicate grains (1.8 vol%) in Spade relative to mean H6 chondrites (11.4 and 9.8 vol%, respectively) show Spade to be a rock that has experienced a significant degree of melting. Various petrographic features (e.g., chromite‐plagioclase assemblages, chromite veinlets, silicate darkening) indicate that melting was caused by shock. Plagioclase was melted during the shock event and flowed so that it partially to completely surrounded nearby mafic silicate grains. During crystallization, plagioclase developed igneous zoning. Low‐Ca pyroxene that crystallized from the melt (or equilibrated with the melt at high temperatures) acquired relatively high amounts of CaO. Metallic Fe‐Ni cooled rapidly below the Fe‐Ni solvus and transformed into martensite. Subsequent reheating of the rock caused transformation of martensite into abundant duplex plessite. Ambiguities exist in the shock stage assignment of Spade. The extensive silicate darkening, the occurrence of chromite‐plagioclase assemblages, and the impact‐melted characteristics of Spade are consistent with shock stage S6. Low shock (stage S2) is indicated by the undulose extinction and lack of planar fractures in olivine. This suggests that Spade reached a maximum prior shock level equivalent to stage S6 and then experienced post‐shock annealing (probably to stage S1). These events were followed by a less intense impact that produced the undulose extinction in the olivine, characteristic of shock stage S2. Annealing could have occurred if Spade were emplaced near impact melts beneath the crater floor or deposited in close proximity to hot debris within an ejecta blanket. Spade firmly establishes the case for post‐shock annealing. This may have been a common process on OC asteroids.     

Formation of feldspathic and metallic melts by shock in enstatite chondrite Reckling Peak A80259

Abstract— The enstatite chondrite reckling peak (rkp) a80259 contains feldspathic glass, kamacite, troilite, and unusual sets of parallel fine‐grained enstatite prisms that formed by rapid cooling of shock melts. Metallic Fe,Ni and troilite occur as spherical inclusions in feldspathic glass, reflecting the immiscible Fe‐Ni‐S and feldspathic melts generated during the impact. The Fe‐Ni‐S and feldspathic liquids were injected into fractures in coarse‐grained enstatite and cooled rapidly, resulting in thin (≤ 10 μm) semicontinuous to discontinuous veins and inclusion trails in host enstatite. Whole‐rock melt veins characteristic of heavily shocked ordinary chondrites are conspicuously absent. Raman spectroscopy shows that the feldspathic material is a glass. Elevated MgO and SiO₂ contents of the glass indicate that some enstatite and silica were incorporated in the feldspathic melt. Metallic Fe,Ni globules are enclosed by sulfide and exhibit Nienrichment along their margins characteristic of rapid crystallization from a Fe‐Ni‐S liquid. Metal enclosed by sulfide is higher in Si and P than metal in feldspathic glass and enstatite, possibly indicating lower O fugacities in metal/sulfide than in silicate domains. Fine‐grained, elongate enstatite prisms in troilite or feldspathic glass crystallized from local pyroxene melts that formed along precursor grain boundaries, but most of the enstatite in the target rock remained solid during the impact and occurs as deformed, coarsegrained crystals with lower CaO, Al₂O₃, and FeO than the fine‐grained enstatite. Reckling Peak A80259 represents an intermediate stage of shock melting between unmelted E chondrites and whole‐rock shock melts and melt breccias documented by previous workers. The shock petrogenesis of RKPA80259 reflects the extensive impact processing of the enstatite chondrite parent bodies relative to those of other chondrite types.     

Multi-zone fusion crust formation and classification of the 2004 Auckland meteorite (L6, S5, and W0)

On June 12, 2004, a meteorite passed through Earth's atmosphere and landed under the television in the living room of a house in Auckland, New Zealand. Textural characteristics, the chemistry of olivine (Fa_23–24) and orthopyroxene (Fs_20.7), and the bulk rock triple oxygen isotopes (δ¹⁷O + 3.1; δ¹⁸O + 4.2‰) from the interior of the completely unweathered (W0) 1.3 kg meteorite, hereafter referred to as Auckland, suggest it to be a strongly metamorphosed fragment from the interior of a low iron ordinary chondrite (L6) parent asteroid. The occurrence of maskelynite but shock fracturing of olivine and pyroxene indicates Auckland experienced extreme shock metamorphism (S5), likely during Ordovician fragmentation of the asteroid parent. The fusion crust consists of three zones: (1) an innermost zone containing narrow Fe-Ni-S-bearing veins that migrated along pre-existing shock fractures in olivine and pyroxene; (2) a middle zone in which the meteorite partially melted to form a silicate glass and immiscible blebs of metal and troilite, and is accompanied by unmelted silicate minerals; and (3) an approximately 0.1 mm wide vesicular-rich outermost layer that largely melted, volatilizing sulfides, before quenching to form glass and olivine. Oxygen isotope values of the bulk rock and/or maskelynite of melted rim and modified substrate are 2–3‰ greater than the meteorite interior and indicate that up to 19% of terrestrial atmospheric O₂ was incorporated into the fusion crust during the formation. The fusion crust migrated inwards as ablation occurred, enabling melting, migration, and re-precipitation ± loss of sulfide and metal components, with the prominent glassy rim therefore forming from an already chemically modified zone.     

Contribution of early impact events to metal‐silicate separation,thermal annealing,and volatile redistribution: Evidence in the Pułtusk H chondrite

Three‐dimensional X‐ray tomographic reconstructions and petrologic studies reveal voluminous accumulations of metal in Pu?tusk H chondrite. At the contact of these accumulations, the chondritic rock is enriched in troilite. The rock contains plagioclase‐rich bands, with textures suggesting crystallization from melt. Unusually large phosphates are associated with the plagioclase and consist of assemblages of merrillite, and fluorapatite and chlorapatite. The metal accumulations were formed by impact melting, rapid segregation of metal‐sulfide melt and the incorporation of this melt into the fractured crater basement. The impact most likely occurred in the early evolution of the H chondrite parent body, when post‐impact heat overlapped with radiogenic heat. This enabled slow cooling and separation of the metallic melt into metal‐rich and sulfide‐rich fractions. This led to recrystallization of chondritic rock in contact with the metal accumulations and the crystallization of shock melts. Phosphorus was liberated from the metal and subsumed by the silicate shock melt, owing to oxidative conditions upon slow cooling. The melt was also a host for volatiles. Upon further cooling, phosphorus reacted with silicates leading to the formation of merrillite, while volatiles partitioned into the residual halogen‐rich, dry fluid. In the late stages, the fluid altered merrillite to patchy Cl/F‐apatite. The above sequence of alterations demonstrates that impact during the early evolution of chondritic parent bodies might have contributed to local metal segregation and silicate melting. In addition, postshock conditions supported secondary processes: compositional/textural equilibration, redistribution of volatiles, and fluid alterations.     

Detailed mineralogy and petrology of highly shocked poikilitic shergottite Northwest Africa 6342

Northwest Africa (NWA) 6342 is an intermediate, poikilitic shergottite, found in Algeria in 2010. It is comprised of two distinct petrographic areas; poikilitic domains with rounded Mg‐rich olivine chadacrysts enclosed by large low‐Ca pyroxene oikocrysts, and a nonpoikilitic domain mainly comprised of subhedral olivine and vesicular recrystallized plagioclase. Oxygen fugacity conditions become more oxidizing during crystallization from the poikilitic to the nonpoikilitic domain (QFM?3.0 to QFM?2.2). As such, it is likely that NWA 6342 experienced a two‐stage (polybaric) crystallization history similar to that of the enriched poikilitic shergottites. NWA 6342 also experienced relatively high levels of shock metamorphism in comparison to most other poikilitic shergottites as evidenced by the fine‐grained recrystallization texture in olivine, as well as melting and subsequent crystallization of plagioclase. The recrystallization of plagioclase requires an extended period of postshock thermal metamorphism for NWA 6342 and similarly shocked intermediate poikilitic shergottites NWA 4797 and Grove Mountains 99027 most likely due to launch from Mars. The similarities in petrology, chemistry, and shock features between these three meteorites indicate that they have similar crystallization and shock histories; possibly originating from the same source area on Mars.     

Complex origins of silicate veinlets in HED meteorites: A case study of Northwest Africa 1109

We report on the petrography and mineralogy of three types of silicate veinlets in the brecciated eucrite Northwest Africa (NWA) 1109. These include Fe‐rich olivine, Mg‐rich olivine, and pyroxene veinlets. The Fe‐rich olivine veinlets mainly infill fractures in pyroxene and also occur along grain boundaries between pyroxene and plagioclase crystals, in both nonequilibrated and equilibrated lithic clasts. The host pyroxene of Fe‐rich olivine veinlets shows large chemical variations between and within grains. The Fe‐rich olivine veinlets also contain fine‐grained Fe³⁺‐bearing chromite, highly calcic plagioclase, merrillite, apatite, and troilite. Based on texture and mineral chemistry, we argue that the formation of Fe‐rich olivine was related to fluid deposition at relatively high temperatures. However, the source of Fe‐rich olivine in the veinlets remains unclear. Magnesium‐rich olivine veinlets were found in three diogenitic lithic clasts. In one of these, the Mg‐rich olivine veinlets only occur in one of the fine‐grained interstitial regions and extend into fractures within surrounding coarse‐grained orthopyroxene. Based on the texture of the interstitial materials, we suggest that the Mg‐rich olivine veinlets formed by shock‐induced localized melting and recrystallization. Pyroxene veinlets were only observed in one clast where they infill fractures within large plagioclase grains and are associated with fine‐grained pyroxene surrounding coarse‐grained pyroxene. The large chemical variations in pyroxene and the fracture‐filling texture indicate that the pyroxene veinlets might also have formed by shock‐induced localized melting and rapid crystallization. Our study demonstrates that silicate veinlets formed by a range of different surface processes on the surface of Vesta.     

Shock‐induced melting,recrystallization, and exsolution in plagioclase from the Martian lherzolitic shergottite GRV 99027

Abstract— Plagioclase in the Martian lherzolitic shergottite Grove Mountains (GRV) 99027 was shocked, melted, and recrystallized. The recrystallized plagioclase contains lamellae of pyroxene, olivine, and minor ilmenite (<1 μm wide). Both the pyroxene and the olivine inclusions enclosed in plagioclase and grains neighboring the plagioclase were partially melted into plagioclase melt pools. The formation of these lamellar inclusions in plagioclase is attributed to exsolution from recrystallizing melt. Distinct from other Martian meteorites, GRV 99027 contains no maskelynite but does contain recrystallized plagioclase. This shows that the meteorite experienced a slower cooling than maskelynite‐bearing meteorites. We suggest that the parent rock of GRV 99027 could have been embedded in hot rocks, which facilitated a more protracted cooling history.     

Two distinct assemblages of high‐pressure liquidus phases in shock veins of the Sixiangkou meteorite

Abstract— Shock‐produced complex veins, including earlier and later veins, are identified in the Sixiangkou L6 chondrite. The early vein is intersected by the late vein and consists of coarse‐grained aggregates of ringwoodite, majorite, and lingunite, and fragments of olivine, pyroxene, plagioclase, metal, and troilite, as well as a fine‐grained matrix of garnet, ringwoodite, metal, and troilite. The late vein mainly consists of a fine‐grained matrix of garnet, magnesiowüstite, metal, and troilite, as well as a small amount of coarse‐grained aggregates. The amount of fine‐grained matrix suggests that the late vein was nearly completely melted, whereas the early vein underwent partial melting. Both fine‐grained assemblages of garnet plus ringwoodite in the early vein and garnet plus magnesiowüstite in the late vein are liquidus phases crystallized from shock‐induced melt. Based on our understanding of the liquidus assemblages, the late vein experienced a higher pressure and temperature than the early vein.     

Crystal‐bearing lunar spherules: Impact melting of the Moon's crust and implications for the origin of meteoritic chondrules

Abstract— Crystal‐bearing lunar spherules (CLSs) in lunar breccia (14313, 14315, 14318), soil (68001, 24105), and impact‐melt rock (62295) samples can be classified into two types: feldspathic and olivine‐rich. Feldspathic CLSs contain equant, tabular, or acicular plagioclase grains set in glass or a pyroxene‐olivine mesostasis; the less common olivine‐rich CLSs contain euhedral or skeletal olivine set in glass, or possess a barred‐olivine texture. Bulk‐chemical and mineral‐chemical data strongly suggest that feldspathic CLSs formed by impact melting of mixtures of ferroan anorthosite and Mg‐suite rocks that compose the feldspathic crust of the Moon. It is probable that olivine‐rich CLSs also formed by impact melting, but some appear to have been derived from distinctively magnesian lunar materials, atypical of the Moon's crust. Some CLSs contain reversely‐zoned “relic” plagioclase grains that were not entirely melted during CLS formation, thin (≤5 μm thick) rims of troilite or phosphate, and chemical gradients in glassy mesostases attributed to metasomatism in a volatile‐rich (Na‐K‐P‐rich) environment. Crystal‐bearing lunar spherules were rimmed and metasomatized prior to brecciation. Compound CLS objects are also present; these formed by low‐velocity collisions in an environment, probably an ejecta plume, that contained numerous melt droplets. Factors other than composition were responsible for producing the crystallinity of the CLSs. We agree with previous workers that relatively slow cooling rates and long ballistic travel times were critical features that enabled these impact‐melt droplets to partially or completely crystallize in free‐flight. Moreover, incomplete melting of precursor materials formed nucleation sites that aided subsequent crystallization. Clearly, CLSs do not resemble meteoritic chondrules in all ways. The two types of objects had different precursors and did not experience identical rimming processes, and vapor fractionation appears to have played a less important role in establishing the compositions of CLSs than of chondrules. However, the many detailed similarities between CLSs and chondrules indicate that it is more difficult to rule out an origin for some chondrules by impact melting than some have previously argued. Differences between CLSs, chondrules, and their host rocks possibly can be reconciled with an impact‐melt origin for some chondrules when different precursors, the higher gravity of the Moon compared to chondrite parent bodies, and the likely presence of nebular gas during chondrule formation are taken into account.