南极普里兹湾海冰厚度的电磁感应探测方法研究

本文介绍一种由EM31-ICE型电磁感应仪和激光测距仪组合而成的船载电磁感应海冰厚度探测系统. 针对海冰和海水的电学特征,运用电磁感应技术提取探测系统至海冰下底面的距离,运用激光测距仪测量冰面粗糙度和探测系统至海冰上表面的距离,两组数据结合,实现了海冰厚度的探测. 通过南极现场探测数据分析,并与钻孔实测冰厚数据对比研究,定量分析了探测系统距离冰面的高度效应,建立了该系统冰厚测定值随高度变化的修正关系式,并对船载航行数据进行了系统校正. 与SCAR ASPeCt的冰厚数据对比分析,表明该系统能够获得可靠的海冰厚度并具有较高的精度,且能满足对极区大范围海冰厚度观测的需求.     

Modelling ice conditions in the easternmost Gulf of Finland in the Baltic Sea

To model ice conditions in the eastern Gulf of Finland, a high-resolution three-dimensional hydrodynamic model is coupled with the advanced sea-ice model HELMI (Haapala et al., 2005). To test the model in extreme situations, the ice pattern in the eastern Gulf of Finland was simulated for a mild ice winter (2007–2008) and for a moderate one (2003–2004). The reference runs were performed on the assumption that the ice in the model domain is fast ice if the sea depth is less than 10 m. Using this assumption, the ice thickness averaged over the Neva Bay (the easternmost part of the Gulf of Finland) is overestimated by the model for almost the entire wintertime in the mild winter and during the ice formation and melting periods in the moderate winter, as compared with the thickness reported in ice charts.     

Fhe application of electromagnetic-induction on the measurement of sea ice thickness in the Antarctic

As an important component of the cryosphere, sea ice is very sensitive to climate change. The study of sea ice physics needs accurate sea ice thickness. This paper presents an electromagnetic induction （EM） technique which can be used to measure the sea ice thickness distribution efficiently and its successful application in the Antarctic Neila Fjord. Based on the electrical properties of sea ice and seawater and the application of electromagnetic field theory, this technique can accurately detect the distance between the EM instrument and the ice/water interface to measure the sea ice thickness. Analyzing the apparent conductivity data obtained by the electromagnetic induction technique and drill-hole measurements at same location allows the construction of a transform equation for the apparent conductivity and sea ice thickness. The verification of the calculated sea ice thickness using this equation indicates that the electromagnetic induction technique is able to determine reliable sea ice thickness with an average relative error of only 5.5%. The ice thickness profiles show the sea ice distribution in Neila Fjord is basically level with a thickness of 0.8 - 1.4 m.     

Sea ice as an evaluation target for HEM modelling and inversion

We investigate helicopter electromagnetic (HEM) inversion schemes applied to synthetic and measured HEM sea ice profiling data. Direct HEM data-to-ice-thickness inversion is compared to three different formal, least squares layered earth inversion algorithms.By making several approximations, it is possible to directly invert a single channel measurement (i.e., the in-phase or quadrature component of a single frequency measurement) to obtain an estimate of sea ice thickness. Measurements from multiple input channels, however, can be used in a layered earth inversion to simultaneously recover several model parameters such as sea ice thickness, sea ice conductivity and sub-ice bathymetry. Synthetic data sets for a particular two-frequency HEM system showed that simple least squares inversion algorithms produce reliable estimates of sea ice thickness in cases where the ice is thicker than 3 m. These methods could also recover acceptable estimates of sea ice thickness when a thin, conductive, partially melted sea ice layer was present, and could determine shallow, sub-ice bathymetry in brackish water. As expected, 1D transformations and inversions of synthetic data for a three-dimensional pressure ridge keel structure contained artifacts, notably broadening of the apparent width of the keel.Prior to inverting a field data set acquired over rather thin (~ 0.5 m) Antarctic sea ice, we found it necessary to recalibrate the phase angle of the measurements using a phasor diagram-based method. Direct transformation of a single channel from the recalibrated data set produced more accurate estimates of sea-ice thickness than formal inversion of multi-channel data. We suggest that the least squares inversion methods are inferior in this situation because of the particular characteristics of the two-frequency HEM system used in this evaluation; the extreme differences in sensitivity of high and low frequency data components, the overall low sensitivity to sea ice conductivity (especially for thin ice), and the partially low signal-to noise ratios of the measurements. The data sets used in this study will be made available to the public to allow alternate inversion approaches to be applied and evaluated. It is suggested that inclusion of parameter bounds and other forms of regularization could help to improve the inversion results.     

Ross ice shelf cavity circulation,residence time,and melting: Results from a model of oceanic chlorofluorocarbons

Despite their harmful effects in the upper atmosphere, anthropogenic chlorofluorocarbons dissolved in seawater are extremely useful for studying ocean circulation and ventilation, particularly in remote locations. Because they behave as a passive tracer in seawater, and their atmospheric concentrations are well-mixed, well-known, and have changed over time, they are ideal for gaining insight into the oceanographic characteristics of the isolated cavities found under Antarctic ice shelves, where direct observations are difficult to obtain. Here we present results from a modeling study of air–sea chlorofluorocarbon exchange and ocean circulation in the Ross Sea, Antarctica. We compare our model estimates of oceanic CFC-12 concentrations along an ice shelf edge transect to field data collected during three cruises spanning 16 yr. Our model produces chlorofluorocarbon concentrations that are quite similar to those measured in the field, both in magnitude and distribution, showing high values near the surface, decreasing with depth, and increasing over time. After validating modeled circulation and air–sea gas exchange through comparison of modeled temperature, salinity, and chlorofluorocarbons with field data, we estimate that the residence time of water in the Ross Ice Shelf cavity is approximately 2.2 yr and that basal melt rates for the ice shelf average 10 cm yr⁻¹. The model predicts a seasonal signature to basal melting, with highest melt rates in the spring and also the fall.     

Characteristics and distribution patterns of snow and meteoric ice in the Weddell Sea and their contribution to the mass balance of sea ice

Based on snow- and ice-thickness measurements at >11 000 points augmented by snow- and icecore studies during 4 expeditions from 1986 - 92 in the Weddell Sea, we describe characteristics and distribution patterns of snow and meteoric ice and assess their importance for the mass balance of sea ice. For first-year ice (FY) in the central and eastern Weddell Sea, mean snow depth amounts to 0.16 m (mean ice thickness 0.75 m) compared to 0.53 m (mean ice thickness 1.70 m) for second-year ice (SY) in the northwestern Weddell Sea. Ridged ice retains a thicker snow cover than level ice, with ice thickness and snow depth negatively correlated for the latter, most likely due to aeolian redistribution. During the different expeditions, 8, 15, 17 and 40% of all drill holes exhibited negative freeboard. As a result of flooding and brine seepage into the snow pack, snow salinities averaged 4‰. Through ¹⁸O measurements the distribution of meteoric ice (i.e. precipitation) in the sea-ice cover was assessed. Roughly 4% of the total ice thickness consist of meteoric ice (FY 3%, SY 5%). With a mean density of 290 kg/m³, the snow cover itself contributes 8% to total ice mass (7% FY, 11% SY). Analysis of ¹⁸O in snow indicates a local maximum in accumulation in the 65 to 75^S latitude zone. Hydrogen peroxide in the snow has proven useful as a temporal tracer and for identification of second-year floes. Drawing on accumulation data from stations at the Weddell Sea coast, it becomes clear that the onset of ice growth is important for the evolution of ice thickness and the interaction between ice and snow. Loss of snow to leads due to wind drift may be considerable, yet is reduced owing to metamorphic processes in the snow column. This is confirmed by a comparison of accumulation data from coastal stations and from snow depths over sea ice. Temporal and spatial accumulation patterns of snow are shown to be important in controlling the sea-ice cover evolution.     

Benthic changes at McMurdo Station, Antarctica following local sewage treatment and regional iceberg-mediated productivity decline

McMurdo Station, the largest research station in Antarctica, ceased on-site garbage dumping in 1988 and initiated sewage treatment in 2003. In 2003-2004 its sea-ice regime was altered by the massive B-15A and C-19 iceberg groundings in the Ross Sea, approximately 100 km distant. Here we follow macrofaunal response to these changes relative to a baseline sampled since 1988. In the submarine garbage dump, surface contaminants levels have declined but associated macrofaunal recolonization is not yet evident. Although sewage-associated macrofauna were still abundant around the outfall nearly 2 yr after initiation of treatment, small changes downcurrent as far as 434 m from the outfall suggest some community recovery. Widespread community changes in 2003-2004, not seen in the decade previously, suggests that the benthos collectively responded to major changes in sea-ice regime and phytoplankton production caused by the iceberg groundings.     

Temporal and spatial trends of total petroleum hydrocarbons in the seawater of Bohai Bay, China from 1996 to 2005

The temporal and spatial distribution of total petroleum hydrocarbons (TPH) in the seawater of Tianjin Bohai Bay during 1996-2005 was investigated for the first time. TPH concentrations in 480 seawater samples collected from 16 stations during a 10-year span were quantified by ultra-violet fluorescence spectroscopy. Petroleum hydrocarbons were ubiquitous in the seawater, and their concentrations were highly variable, ranging from 23.7 to 508 μg L⁻¹. TPH concentrations in the seawater varied with seasons, showing a decreasing order of winter > spring > summer. Over the 10-year period, TPH at all stations steadily decreased. The highest values obtained were at stations near the port areas and Dagu outfall where shipping activities and land-based waste water discharges were the major sources of pollution. Our results provided the background information on the extent of TPH contamination in the seawater and highlighted the need to further control TPH pollution in Tianjin Bohai Bay.     

DMSP and DMS in coastal fast ice and under-ice water of Lützow-Holm Bay, eastern Antarctica

The combined concentration of total dimethylsulfoniopropionate and dimethylsulfide (DMSP+DMS) were measured in Antarctic fast ice on the coast of Lützow-Holm Bay, eastern Antarctica. High bulk-ice DMSP+DMS and chlorophyll a concentrations were found at the bottom of the sea ice, and these concentrations were higher than those in the under-ice water. The bulk-ice DMSP+DMS and chlorophyll a concentrations were highly correlated (r²=0.68, P<0.001), suggesting that the high bulk-ice DMSP+DMS concentrations were caused mainly by the presence of algae assemblages in the ice. The calculated brine DMSP+DMS concentrations were as high as 1100 nM in the bottom ice layer, and the vertical profile patterns of brine DMSP+DMS concentrations were almost the same as for the bulk ice, mainly because of the small amount of variability in the vertical brine volume fraction. DMSP+DMS and chlorophyll a concentrations in the under-ice water increased, whereas the salinity of the under-ice water decreased, during the sampling period. These results reflect the supply of freshwater containing high levels of DMSP+DMS to the water just under the ice as the ice melted. These results suggest that sea-ice melting could be important to sulfur cycling in coastal ice-covered regions of the polar oceans.     

Temporal and spatial biomonitoring of heavy metals in eastern Aegean coastal waters using Amphibalanus amphitrite

This biomonitoring study presents the spatial and temporal distributions of heavy metals in the soft tissues of a major fouling species Amphibalanus amphitrite living on hard substrate at different sites along the eastern Aegean coast. A. amphitrite has been chosen as a strong candidate for monitoring heavy metals. Sediment and seawater samples were also collected to detect their metal contents in order to gain more information on the environmental conditions and possible bioaccumulation patterns. The physico-chemical characteristics of sampling stations have been measured in order to characterize the sampling area. The order of metal concentrations in barnacles, sediment and seawater decreased in the following order Cu > Fe > Zn > Mn > Cd > Cr > Pb > Hg, Fe > Mn > Zn > Cu > Pb > Cr > Hg > Cd and Fe > Zn > Mn > Cu > Pb > Cr > Cd > Hg, respectively. These results showed that barnacles accumulate Cu in a higher degree than both sediment and seawater. Moreover, metal concentrations in barnacle have the potential for use in any future regulatory framework monitoring and eventually controlling ambient metal pollution levels.     

Rapid physically driven inversion of the air–sea ice CO2 flux in the seasonal landfast ice off Barrow,Alaska after onset of surface melt

The air–sea ice CO₂ flux was measured over landfast sea ice in the Chukchi Sea, off Barrow, Alaska in late May 2008 with a chamber technique. The ice cover transitioned from a cold early spring to a warm late spring state, with an increase in air temperature and incipient surface melt. During melt, brine salinity and brine dissolved inorganic carbon concentration (DIC) decreased from 67.3 to 18.7 and 3977.6 to 1163.5 μmol kg⁻¹, respectively. In contrast, the salinity and DIC of under-ice water at depths of 3 and 5 m below the ice surface remained almost constant with average values of 32.4±0.3 (standard deviation) and 2163.1±16.8 μmol kg⁻¹, respectively. The air–sea ice CO₂ flux decreased from +0.7 to −1.0 mmol m⁻² day⁻¹ (where a positive value indicates CO₂ being released to the atmosphere from the ice surface). During this early to late spring transition, brought on by surface melt, sea ice shifted from a source to a sink for atmospheric CO₂, with a rapid decrease of brine DIC likely associated with a decrease in the partial pressure of CO₂ of brine from a supersaturated to an undersaturated state compared to the atmosphere. Formation of superimposed ice coincident with melt was not sufficient to shut down ice–air gas exchange.     

Analysis of bacterial diversity and metals in produced water, seawater and sediments from an offshore oil and gas production platform

Produced water is one of the largest waste products routinely discharged into the ocean from offshore oil and gas platforms. This study analyzed bacterial communities and metals in the produced water, surrounding seawater, and sediment around the Thebaud platform. The bacterial community within the produced water was different from the seawater (SAB = 13.3), but the discharge had no detectable effect on the bacterial communities in the seawater (SAB > 97). In contrast, genomic analysis of sediments revealed that the bacterial community from 250 m was different (SAB = 70) from other locations further from the discharge, suggesting that the produced water had a detectable effect on the bacterial community in the sediment closest to the discharge. These near-field sediments contained elevated concentrations of manganese and iron that are associated with the produced water effluent. The results suggested that the discharge of produced water has influenced the bacterial community structure of sediments adjacent to the platform.     

Underwater noise pollution in a coastal tropical environment

Underwater noise pollution has become a major concern in marine habitats. Guanabara Bay, southeastern Brazil, is an impacted area of economic importance with constant vessel traffic. One hundred acoustic recording sessions took place over ten locations. Sound sources operating within 1 km radius of each location were quantified during recordings. The highest mean sound pressure level near the surface was 111.56 ± 9.0 dB re 1 μPa at the frequency band of 187 Hz. Above 15 kHz, the highest mean sound pressure level was 76.21 ± 8.3 dB re 1 μPa at the frequency 15.89 kHz. Noise levels correlated with number of operating vessels and vessel traffic composition influenced noise profiles. Shipping locations had the highest noise levels, while small vessels locations had the lowest noise levels. Guanabara Bay showed noise pollution similar to that of other impacted coastal regions, which is related to shipping and vessel traffic.     

Coaxial coil towed EMI sensor array for UXO detection and characterization

A new broadband electromagnetic induction (EMI) array sensor, GEM-5, for detecting and characterizing Unexploded Ordnance (UXO) has been developed in order to provide high production rates for EMI surveys. The sensor consists of a single rectangular loop transmitter around a linear array of seven pairs of coaxial receiver coils, with each coil in a pair located at the same vertical distance above and below the loop transmitter. The coil pairs are wired in an inverted series so that the signal consists of the difference between the voltage induced in the upper and lower coils. This particular configuration provides a high degree of primary field cancellation, dense spatial sampling rate due to simultaneous and continuous operation of all sensors, suppression of motion-induced and environmental noise, and strong source fields at typical UXO burial depths providing deep detection range. Our prototype tests indicate that the array yields a lower static and motion-induced noise over the critical low frequencies than that of existing sensors, and in particular, the signal-to-noise ratio at 90 Hz is 32 dB higher. Environmental noise can be largely removed from the difference measurements. The field test results from UXO test sites show that the prototype sensor has smoother background and appears to detect more seeded targets than the GEM-3 concentric sensor, however some of that gain can be attributed to higher power transmitter electronics.     

Export fluxes of biogenic matter in the presence and absence of seasonal sea ice cover in the Chukchi Sea

Drifting sediment traps were deployed at 9 stations in May-June (ice-covered conditions) and July-August (ice-free conditions) 2004 in the Chukchi Sea to investigate the variability in export fluxes of biogenic matter in the presence and absence of sea ice cover. Measurements of chlorophyll-a (Chl-a), particulate organic carbon (POC), particulate nitrogen (PN), phytoplankton, zooplankton fecal pellets, and the stable carbon isotope composition (δ¹³C) of the sinking material were performed along Barrow Canyon (BC) and a parallel shelf-to-basin transect from East Hanna Shoal (EHS) to the Canada Basin. POC export fluxes were similarly high in the presence (378±106 mg C m⁻² d⁻¹) and in the absence of ice cover (442±203 mg C m⁻² d⁻¹) at the BC stations, while fluxes were significantly higher in the absence (129±98 mg C m⁻² d⁻¹) than in the presence of ice cover (44±29 mg C m⁻² d⁻¹) at the EHS stations. The C/N ratios and δ¹³C values of sinking organic particles indicated that POC export fluxes on the Chukchi continental shelf were mostly composed of freshly produced labile material, except at the EHS stations under ice cover where the exported matter was mostly composed of refractory material probably advected into the EHS region. Chl-a fluxes were higher under ice cover than in ice-free water, however, relatively low daily loss rates of Chl-a and similar phytoplankton carbon fluxes in ice-covered and ice-free water suggest the retention of phytoplankton in the upper water column. An increase in fecal pellet carbon fluxes in ice-free water reflected higher grazing pressure in the absence of ice cover. Elevated daily loss rates of POC at the BC stations confirmed other indications that Barrow Canyon is an important area of carbon export to the basin and/or benthos. These results support the conclusion that there are large spatial and temporal variations in export fluxes of biogenic matter on the Chukchi continental shelf, although export fluxes may be similar in the presence and in the absence of ice cover in highly productive regions.     

A study of marine pollution caused by the release of metals into seawater following acid spills

This study examined the potential metal pollution induced by the accidental spill of different acids into seawater. The acids sink to the bottom according to their densities and subsequently react with marine sediments. The acids selected for this study were acetic, hydrochloric, nitric, sulfuric, and phosphoric acids; the metallic elements selected were Cr, Cu, Fe, Mn, Pb and Zn. The sediment was collected in Brest Harbour. The percentages of metals released from this sediment in the presence of various concentrations of acids in seawater were important; concentrations of approximately 7 mg L⁻¹ for Mn and 60 mg L⁻¹ for Zn were observed under our experimental conditions. We also examined the rate of release of these metals from the sediment into the seawater in the presence of the different acids and under different experimental conditions. We found that most of the metallic elements were released from the sediments into the seawater during the first fifteen minutes of exposure. After this time, a high degree of pollution was induced if acids leached into seawater were not rapidly diluted.     

Early spring turbulent mixing in an ice-covered Arctic fjord during transition to melting

Observations are presented of currents, hydrography and turbulence in a jet-type tidally forced fjord in Svalbard. The fjord was ice covered at the time of the experiment in early spring 2004. Turbulence measurements were conducted by both moored instruments within the uppermost 5 m below the ice and a microstructure profiler covering 3–60 m at 75 m depth. Tidal choking at the mouth of the fjord induces a tidal jet advecting relatively warmer water past the measurement site and dominating the variability in hydrography. While there was no strong correlation with the observed hydrography or mixing and the phase of the semidiurnal tidal cycle, the mean structure in dissipation of turbulent kinetic energy, work done under the ice and the mixing in the water column correlated with the current when conditionally sampled for tidal jet events. Observed levels of dissipation of turbulent kinetic energy per unit mass, 1.1×10⁻⁷ W kg⁻¹, and eddy diffusivity, 7.3×10⁻⁴ m² s⁻¹, were comparable to direct measurements at other coastal sites and shelves with rough topography and strong forcing. During spring tides, an average upward heat flux of 5 W m⁻² in the under-ice boundary layer was observed. Instantaneous (1 h averaged) large heat flux events were correlated with periods of large inflow, hence elevated heat fluxes were associated with the tidal jet and its heat content. Vertical heat fluxes are derived from shear-probe measurements by employing a novel model for eddy diffusivity [Shih et al., 2005. Parameterization of turbulent fluxes and scales using homogeneous sheared stably stratified turbulence simulations. Journal of Fluid Mechanics 525, 193–214]. When compared to the direct heat flux measurements using the eddy correlation method at 5 m below the ice, the upper 4–6 m averaged heat flux estimates from the microstructure profiler agreed with the direct measurements to within 10%. During the experiment water column was stably, but weakly, stratified. Destabilizing buoyancy fluxes recorded close to the ice were absent at 5 m below the ice, and overall, turbulence production was dominated by shear. A scaling for dissipation employing production by both stress and buoyancy [Lombardo and Gregg, 1989. Similarity scaling of viscous and thermal dissipation in a convecting boundary layer. Journal of Geophysical Research 94, 6273–6284] was found to be appropriate for the under-ice boundary layer.     

Hg bioaccumulation in marine copepods around hydrothermal vents and the adjacent marine environment in northeastern Taiwan

The Hg concentration in seawater and copepod samples collected from the area around hydrothermal vents at Kueishan Island and the adjacent marine environment in northeastern Taiwan were analyzed to study Hg bioaccumulation in copepods living in polluted and clean marine environments. The seawater collected from the hydrothermal vent area had an extremely high concentration of dissolved Hg, 50.6–256 ng l⁻¹. There was slightly higher Hg content in the copepods, 0.08–0.88 μg g⁻¹. The dissolved Hg concentration in the hydrothermal vent seawater was two to three orders of magnitude higher than that in the adjacent environment. The bioconcentration factor of the studied copepods ranged within 10³–10⁶, and showed higher dissolved concentration as the bioconcentration factor was lower. A substantial abundance, but with less copepod diversity was recorded in the seawater around the hydrothermal vent area. Temora turbinata was the species of opportunity under the hydrothermal vent influence.     

Air-sea CO2 exchange of beach and near-coastal waters of the Chukchi Sea near Barrow, Alaska

Partial pressure of CO₂ in equilibrium with sample water (pCO₂) for the coastal water in the Chukchi Sea was continuously observed in summer, 2008. Average daily CO₂ flux calculated from the pCO₂ and gas transfer coefficients ranged from −0.144 to −0.0701 g C m⁻² day⁻¹ depending on which gas transfer coefficient was used. The pCO₂ before the landfast ice sheets melted appeared to be highly biologically controlled based on the following information: (1) the diurnal pattern of pCO₂ was strongly correlated with Photosynthetic Photon Flux Density (PPFD); (2) high chlorophyll density was observed during periods of peak uptake; and (3) the day-to-day variation in the pCO₂ strongly correlated with the presence or absence of near-shore ice sheets. The lowest pCO₂ of 35 ppm together with the highest PPFD of 1362 μmol E m⁻² s⁻¹ were observed in the afternoon on June 28 in the presence of sea ice. The very low pCO₂ observed in late June was likely caused by high photosynthetic rates related to high phytoplankton densities typically observed from spring to early summer near the ice edge, and by water low in salinity and CO₂ released by melting sea ice early in the season.     

Optimization of nutrient component for diesel oil degradation by Rhodococcus erythropolis

A novel bacterium T7-2 was isolated from the oil-polluted sea-bed mud of Bohai Sea, northern China, which can degrade diesel oil at 15 °C. This bacterium was identified as a strain of Rhodococcus erythropolis according to its 16S rDNA gene. In order to enhance degradation efficiency, a five-level, three-factor central composite design was employed to optimize the nutrition supplied to artificial seawater. The results indicate that a supplement of 2.53 g (NH₄)₂SO₄ L⁻¹, 2.75 g Na₂HPO₄ L⁻¹ and 0.01 g yeast extract L⁻¹ to artificial seawater increases the degradation rate from 12.61% to 75% within 7 d.