Exploring the dating of “dirty” speleothems and cave sinters using radiocarbon dating of preserved organic matter

Speleothems and other carbonate deposits such as tufa containing high proportions of detrital material can be difficult to chemically date due to detrital thorium levels causing a high level of error in conventional U-Th disequilibrium dating. Here we investigate the use of an alternative technique centring on radiocarbon dating of organic matter preserved within the detrital fraction. Non-acid soluble humic, particulate and detritally absorbed organic matter was recovered from eight samples from a flowstone sinter formed within a roman aqueduct at Trento in Italy with a maximum age of 100 CE (1850 cal yr BP), and two repeat samples from a dripstone formed within the 20th Century on a wire fence at Lilly-Pilly Cave, Buchan Caves Reserve in Victoria, Australia. In the aqueduct samples the median calibrated ¹⁴C ages ranged from 2232 to 2889 cal yr BP, with 95.4% probability age range in the youngest and oldest samples of 2153–2337 and 2342–3449 cal yr BP respectively. The median age of the more modern dripstone was 336 cal yr BP, with a 95.4% probability age range of 148–486 cal yr BP. These results provide very approximate ball-park estimates of the age of the sample, but are consistently too old when compared to the known maximum ages of formation. It is hypothesised that this offset is due to a combination of the nature of the organic carbon transported from the source organic matter pools, and reworking of both modern and old organic carbon by in situ microbial communities.     

Optical dating and lithic microwaste—Archaeological applications

Lithic microwaste (<1 mm in maximum dimensions) is produced during lithic tools and rock engraving manufacture. For tools or rocks containing quartz, small particles persist as microwaste initially on the ground surface but later at least some particles are incorporated into sedimentary deposits associated with the occupation site. If microwaste is distinguished from naturally occurring sediments, then optical dating of microwaste or its surrounding sediment would provide a mechanism for establishing a terminus-ante-et-post-quem for archaeological deposits. Identification of microwaste is undertaken by comparing the shape of microwaste particles with those from surface sediments, taking particular note of angularity and irregular shapes; and by analysing quartz grain surface morphologies. On the basis of surface features identified on experimental microwaste, particles identified as microwaste are separated from the sedimentary grains. Scanning electron microscopy and light microscopy are used to determine surface differences between pedogenic grains and anthropogenic material from archaeological deposits. Single-grain OSL dating technique is then employed for age determinations for particles identified as microwaste. It has been noted in previous research that microwaste particles may lie within or close to the age boundaries of the surrounding sediments but not necessarily where larger lithic material is found. Microwaste is incorporated into sediment and is not subjected to the same degree of movement as larger lithic waste and stone tools within the deposit. The advantage of dating microwaste directly by OSL is that it removes ambiguity about archaeological association. Archaeological events can be dated directly and correlated with sediment ages from surrounding environments, regardless of post-depositional processes. Sand grains surrounding artefacts are dated, usually leaving open the question of the association of the artefact to the sedimentary level, as the artefact may have been displaced from its original depositional level.     

Are feldspar SAR protocols appropriate for post-IR IRSL dating?

Recently proposed post-infrared infrared stimulated luminescence (post-IR IRSL or pIR) dating protocols have largely overcome problems associated with anomalous fading and have become increasingly important for age determination of Quaternary sediments. Here, we investigate the suitability of the proposed post-IR IRSL protocols for accurate equivalent-dose estimation on K-feldspar extracts. Our research focuses on potential sensitivity changes between the natural signal and the first test dose signal in single-aliquot regenerative dose (SAR) procedures that are not detected and thus not corrected using test-dose responses.For these investigations, we employed the Single Aliquot Regeneration and Added dose (SARA) procedure, which combines equivalent-dose estimation with a dose recovery test. Results indicated that high-temperature preheats (>260 °C for 60 s) may induce a trapping sensitivity change in IRSL signals measured at low temperature (<100 °C). As this sensitivity change cannot be detected through test dose responses in the SAR protocol, it may result in an invalid equivalent-dose estimation. However, trapping sensitivity changes were not observed after low temperature preheats (<260 °C for 60 s), nor in pIR signals measured at elevated temperature (>100 °C) after a high temperature preheat. Our results indicate that the SAR protocol is appropriate for equivalent-dose determination using elevated-temperature pIR signals (e.g. pIR at 290 °C or multiple elevated temperature pIR at 250 °C). The SAR protocol may also be appropriate for equivalent-dose determination using low temperature pIR signals, provided that the combination of preheat and measurement temperature is carefully chosen to avoid the unwanted effects of sensitivity change during the first preheat.     

Combined unspiked K–Ar and 40Ar/39Ar dating applied to the dating of 80–260 ka old Icelandic sub-glacial rhyolites

We have used two techniques (i.e. K–Ar and ⁴⁰Ar/³⁹Ar) on Icelandic obsidian samples to produce and more specially to estimate the quality and accuracy of the ages that can be obtained. Following a meticulous protocol, we were able to date six rhyolitic eruptions with an accuracy 7 to 40 times better than those obtained previously. Among these six rhyolites are the first published K–Ar and ⁴⁰Ar/³⁹Ar ages of Krafla.The combined K–Ar and ⁴⁰Ar/³⁹Ar approach produces not only highly precise but also accurate ages. Such high precision makes it possible to produce accurate reconstructions of ice thickness at a given location and time, to test whether there was a possible link between deglaciation and rhyolitic volcanism onset in Iceland, and to explore other possible applications of the ⁴⁰Ar/³⁹Ar dating method to paleo-environmental and paleo-climatic reconstruction at Iceland's latitude.Then, we investigate, by combining geochemistry (i.e. determination of major and trace element composition) and geochronology (i.e. dating of rhyolitic eruptions via K–Ar and ⁴⁰Ar/³⁹Ar dating) for a number of Icelandic rhyolitic volcanoes whose activity could be recorded in North Atlantic sedimentary cores as well as in Arctic ice. The aim of this approach is to provide new independent anchors and correlations between climate records. Of the six dated eruptions, we propose that one is record in North Atlantic sediments, the Loðmundur eruption that constitutes one of the Kerlingarfjöll tuyas, which we date at 189.9 ± 1.1 ka and assume to be the source of the tephra recognized in core MD04-2822 at a depth of 3630–3631 cm.     

“Difference Dating”: A novel approach towards dating alpine glacial moraines

The East Antarctic Ice Sheet responds sluggishly to shifts in climate. To capture subtle changes in Antarctic climate, researchers have focused instead on smaller alpine and cirque glaciers that fringe the ice sheet throughout the McMurdo Dry Valleys. The exposure ages of glacial moraine boulders scatter widely and often incorporate large amounts of inheritance, prohibiting the construction of a regional deglaciation chronology. We present a new sampling technique that takes advantage of ubiquitous desert pavements and allows for the detection of inheritance in overlying glacial moraine boulders. Our approach requires a large sample set, but offers increased confidence in modeling moraine age, an acceptable trade-off considering the need for more refined Antarctic paleoclimate reconstructions. Using the beryllium-10 system in sandstone quartz, we show that single exposure ages collected from moraine boulder tops are frequently inaccurate, and consistently over- and underestimate moraine age. Difference Dating offers a new approach to dating alpine glacial moraines independent from traditional boulder exposure age dating.     

Isotopic feature and uranium dating of the volcanic rocks in the Okinawa Trough

1 Introduction The Okinawa Trough(OT) extends for ~1200 km between Taiwan and Kyushu, and is an incipient back-arc basin bounded by the Ryukyu Arc to the south and east, and by Diaoyudao Uplift Belt[1,2] (Tai- wan-Sinzi Belt[3]) to the north and west. Drastic faults and volcanic activities are the typical features in the OT. Generally, the OT is divided into three segments (north, middle and south) by the Tokara Strait and Kerama Gap[4]. The geological features, such as tec- tonics, m…     

Luminescence dating of scoria fall and lahar deposits from Somma–Vesuvius,Italy

Luminescence dating has been applied to scoria and lahar deposits from Somma–Vesuvius, Italy. Samples include scoria from the AD472 and 512 (or 536) eruptions and lahar deposits. In order to find a stable luminescence signal which is less affected by anomalous fading, infrared stimulated luminescence (IRSL) signals at elevated temperatures after bleaching with IR at 50 °C (termed post-IR IRSL; pIRIR) were tested at different preheat and elevated stimulation temperatures. The fading rates of both IRSL and pIRIR signals reduced dramatically with increasing preheat and pIRIR stimulation temperatures. A pIRIR signal measured at 290 °C after a preheat at 320 °C (60 s) and an IR stimulation at 50 °C (100 s) was selected to calculate the equivalent dose (D_e). The gamma spectrometry results indicate that the U-series nuclides are not in equilibrium and there is a large ²²⁶Ra excess. The dose rates and ages were calculated by assuming a ²²⁶Ra excess (over its parent ²³⁰Th) at deposition, and that this unsupported excess then decayed to the present level. The resulting luminescence ages of the two scoria samples agreed with the expected ages, and the ages of the lahar deposits indicate that they are associated with the AD1631 eruption.     

Paleomagnetic dating of the Cenjiawan Paleolithic site in the Nihewan Basin, northern China

It draws much attention of scientists how early hu- mans occupy and adapt to the rigorous climate and environment at high northern latitudes in East Asia after they stepped out of Africa, passed West Asia and finally arrived in East Asia[1-4]. Reliable age determi- nations of Paleolithic sites from northeastern Asia not only help to find out the earliest occupation of early humans in this region, but also relate to the founda- tion of the overall framework of human origin and migration[1-8]…     

Zircon U–Pb dating using LA-ICP-MS: Quaternary tephras in Boso Peninsula,Japan

Zircon U–Pb dating using LA-ICP-MS was applied to six Quaternary tephras in Boso Peninsula, central Japan: J1, Ks4, Ks5, Ks10, Ks11, and Ch2 in descending order. Accurate age determination of these tephras is of critical importance because they are widespread tephras in Japan and also relevant to a candidate site for the global boundary stratotype section and point of the early–middle Pleistocene boundary. Twenty grains were dated for each tephra and the following results were obtained. The J1 tephra had only 5 grains that yielded <2 Ma. The obtained age was ∼0.2 m.y. older than the stratigraphic age. No Quaternary ages were obtained from the Ks4 tephra. The Ks5 and Ks10 tephras had 10–12 grains that were ∼0.1–0.3 m.y. older than the stratigraphic age. The Ks11 tephra had 14 grains that yielded a weighted mean age of 0.52 ± 0.04 Ma (error reported as 95% confidence level), which was in agreement with the stratigraphic age. The Ch2 tephra had 16 grains that yielded a weighted mean age of 0.61 ± 0.02 Ma, which was also in agreement with the stratigraphic age. The good agreement between zircon U–Pb ages and the stratigraphy for Ks11 and Ch2 tephras validates the reliability of the established stratigraphy and our dating approach. The other tephras that yielded ∼0.1–0.3 m.y. older ages than the stratigraphy may indicate that the analyzed zircons were antecrysts that crystallized before eruption or they were detrital zircons incorporated during deposition.     

SHRIMP zircon U-Pb dating in Jingshan "migmatitic granite", Bengbu and its geological significance

The petrographic characteristics of Jingshan "migmatitic granite" and the occurrence of the magmatic zircons indicate that the granite was formed by normal crystallization of felsic melts. All zircons in the granite have inherited cores and fine-scale oscillatory zoning rims of magmatic origin. It is realized that the granite was formed at 160.2±1.3 Ma through dating magmatic zircons. The generation of the granitic magma could be related to the lithospheric mantle and/or lower crust delamination after the ultrahigh pressure metamorphism (UHPM) in Triassic. Most inherited zircons yield the ages of 217.1±6.6 Ma, which is consistent with the peak UHPM in the Dabie-Sulu orogenic belt. Some of the inherited zircons (433-722 Ma) constitute a discordia line with the upper intercept age of 850+85/-68 Ma and a lower intercept age of 261+100/-140 Ma. These ages imply that the granite could be derived from the partial melting of the crustal materials of the South China Block that was intensively superimposed by t     

Re-Os (ICP-MS) dating of the massive sulfide ores from the Jinchuan Ni-Cu-PGE deposit

The Jinchuan Ni-Cu-PGE deposit is the largest nickel sulfide deposit in China and the third largest in the world[1]. It is also the largest platinum deposit in China and contains about 60% platinum reserve of China[2]. The Jinchuan intrusion covers only an area of 1.34 km2, but 47.8% of its volume is the orebody. That makes Jinchuan a typical “large ore deposit in a small intrusion”. A number of research works has been car-ried out towards the Jinchuan deposit. Different ore-forming mo…     

The Upper Devonian orbital cyclostratigraphy and numerical dating conodont zones from Guangxi,South China

The hierarchically organized laminae, bundles, bundlesets and superbundlesets which correspond to a sub-Milankovitch, obliquity or precession, eccentricity and long eccentricity cyclothems, respectively, have been distinguished from the Upper Devonian Fras-nian-Famennian (F-F) transitional carbonate successions deposited in the carbonate-basin and slope facies of Guangxi, South China. The durations of cyclothems are 8000-10000a, 16667a or 33333a, 100000a and 400000a, respectively. The ratio of eccentricity to precession, eccentricity to obliquity, and long eccentricity to eccentricity is 1 : 6, 1 : 3 and 1 : 4 in the Devonian, respectively. Orbital cyclostratigraphical studies show that the durations of the conodont falsio-valis Zone, transitans Zone, punctate Zone, Lower hassi Zone, Upper hassi Zone, jamieae Zone, Lower rhenana Zone, Upper rhenana Zone, linguiformis Zone, Lower triangularis Zone, Middle triangularis Zone and Upper triangularis Zone are 0.4, 0.4, 0.4, 0.3, 0.4, 0.2, 0.8, 0.6, 0.8, 0.3, 0     

P–PINI: A cosmogenic nuclide burial dating method for landscapes undergoing non-steady erosion

Existing methods of cosmogenic nuclide burial dating perform well provided that sediment sources undergo steady rates of erosion and the samples experience continuous exposure to cosmic rays. These premises exert important limitations on the applicability of the methods. And yet, high mountain sediment sources are rife with transient processes, such as non-steady erosion by glacial quarrying and/or landsliding, or temporary cosmic-ray shielding beneath glaciers and/or sediment. As well as breaching the premises of existing burial dating methods, such processes yield samples with low nuclide abundances and variable ²⁶Al/¹⁰Be ratios that may foil both isochron and simple burial-age solutions. P–PINI (Particle-Pathway Inversion of Nuclide Inventories) is a new dating tool designed for dating the burial of sediments sourced from landscapes characterized by abrupt, non-steady erosion, discontinuous exposure, and catchments with elevation-dependent ²⁶Al/¹⁰Be production ratios. P–PINI merges a Monte Carlo simulator with established cosmogenic nuclide production equations to simulate millions of samples (¹⁰Be–²⁶Al inventories). The simulated samples are compared statistically with ¹⁰Be–²⁶Al measured in field samples to define the most probable burial age. Here, we target three published ¹⁰Be–²⁶Al datasets to demonstrate the versatility of the P–PINI model for dating fluvial and glacial sediments. (1) The first case serves as a robust validation of P–PINI. For the Pulu fluvial gravels (China), we obtain a burial age of 1.27 ± 0.10 Ma (1σ), which accords with the isochron burial age and two independent chronometers reported in Zhao et al. (2016) Quaternary Geochronology 34, 75–80. The second and third cases, however, reveal marked divergence between P–PINI and isochron-derived ages. (2) For the fluvial Nenana Gravel (USA), we obtain a minimum-limiting burial age of 4.5 ± 0.7 Ma (1σ), which is compatible with unroofing of the Alaska Range starting ∼ 6 Ma, while calling into question the Early Pleistocene isochron burial age presented in Sortor et al. (2021) Geology 49, 1473–1477. (3) For the Bünten Till (Switzerland), we obtain a limiting burial age of <204 ka (95th percentile range), which conforms with the classical notion of the most extensive glaciation in the northern Alpine Foreland assigned to the Riss glaciation (sensu marine isotope stage 6) contrary to the isochron burial age presented in Dieleman et al. (2022) Geosciences, 12, 39. Discrepancies between P–PINI and the isochron ages are rooted in the challenges posed by the diverse pre-burial ²⁶Al/¹⁰Be ratios produced under conditions characteristic of high mountain landscapes; i.e., non-steady erosion, discontinuous cosmic-ray exposure, and elevation-dependent ²⁶Al/¹⁰Be production ratios in the source region, which are incompatible with the isochron method, but easily accommodated by the stochastic design of P–PINI.     

Comparative dating of a Bison-bearing late-Pleistocene deposit,Térapa,Sonora, Mexico

A recently discovered Bison-bearing fossil locality at Térapa, Sonora, Mexico, had previously been dated to 440 ± 130 ka using whole rock ⁴⁰Ar/³⁹Ar on a basalt flow that impounds the deposit. This age is considerably older than the accepted age of about 240–160 ka for the migration of Bison into greater North America. The Térapa deposit also contains a mixture of fossils from extralimital or extinct tropical animals and temperate animals. Constraining the age of the deposit is critical to interpret the paleontologic and paleoclimatologic implications of this unique Sonoran fossil locality. Three additional geochronological methods have been applied to this deposit (infrared stimulated luminescence (IRSL), amino acid racemization (AAR), and radiocarbon) and the data from the original ⁴⁰Ar/³⁹Ar age were revisited. The IRSL data suggest that the impounding basalt flow and the sediments that abut it were emplaced 43 ka ago and that the oldest sediments were deposited shortly after. Two radiocarbon ages suggest the fossiliferous sediments were emplaced by 42 ka. Effective diagenetic temperatures inferred from the AAR results, combined with AAR data from a similar-age deposit in southern Arizona, are in accordance with the 40–43 ka age estimates. For the AAR results to corroborate the ⁴⁰Ar/³⁹Ar age, the effective diagenetic temperature for the area would need to be approximately 3 °C, which is unrealistically low for northern Mexico. The new geochronological results suggest the Térapa deposit and fossils are 40–43 ka old. The anomalously old ⁴⁰Ar/³⁹Ar age for the impounding basalt is probably the result of low ⁴⁰Ar* concentrations and inherited ⁴⁰Ar.     

AMS dating of insect chitin – A discussion of new dates,problems and potential

Results from AMS dating applied to insect chitin from a variety of contexts and different preservation conditions and retrieval methods are presented. Secure contexts, which include other dated organic material from different geographic locations ranging from Egypt to Greenland and different chronological periods, from Lateglacial to Medieval, have been used. In addition, insect species with different dietary requirements have been selected for dating purposes in order to provide an understanding as to whether diet plays a role in the chitin dating results. Dates from each context/site are discussed separately in the context of their stratigraphy and/or archaeology. Our research concentrates on the results from pre-treatment methods which require small quantities of chitin as these could be applied in a variety of Quaternary and archaeological contexts. The dates from carbonised and desiccated remains where no chemicals had been involved in storage fell within the range of dates from other organics or the archaeology. Although some of the dates from waterlogged contexts were successful, problems were encountered and these have been linked with long term storage in various alcohols of uncertain provenance. Whilst short term immersion in paraffin (kerosene) and alcohols during processing probably has no impact, it is recommended that chitinous material for dating be stored in acidified distilled water. Our results demonstrate the potential of chitin as a dating medium and provide a basis for its wider application.     

ESR dating of Pleistocene archaeological localities of the Nihewan Basin,North China – Preliminary results

The well-developed, late Cenozoic Nihewan Beds in northern China are amongst the most famous and well-preserved Quaternary strata in East Asia. The Nihewan Basin is also well-known for its mammalian fossils and stone artifacts, which document early human settlements in high northern latitudes (around 40°N). It is a key geological place to study palaeoenvironments and ancient human activities due to the excellent age-control of the formation by palaeomagnetism. In the present paper, the sediments of two Paleolithic sites were dated using the ESR signals of the titanium center in quartz. In order to check the reliability of our analytical procedures, a reference sample collected near the Brunhes/Matuyama (B/M) boundary at the Donggutuo site was firstly analyzed, yielding an age of 750 ± 88 ka. Then, three samples collected from the Dongpo site were analyzed by the same procedures. Our ESR results indicate that the age of the Dongpo cultural layer ranges between 304 ± 12 ka and 333 ± 23 ka, with an average of approximately 321 ± 15 ka.     

Two types of CO2− radicals threaten the fundamentals of ESR dating of tooth enamel

In ESR dating of tooth enamel, dose values are usually obtained from powdered samples. It has been shown that the qualitative response of enamel powder to environmental and laboratory dosing is closely similar, thus apparently validating ESR protocols for dose estimation. When working on human fossils, their cultural and scientific value prevents the powdering of any samples. Measurements are carried out on enamel fragments instead. In fragments, natural and laboratory irradiations cause significantly different ESR responses. These can be attributed to two distinct CO₂⁻ radicals, one with apparently axial symmetry (orientated) and one that has no preferential orientation (non-orientated). The spectra of the naturally irradiated samples investigated here show a mix of about 90% of the orientated and about 10% of the non-orientated CO₂⁻ radicals. In contrast, laboratory irradiation induces a mix of about 60% orientated and 40% non-orientated CO₂⁻ radicals. Heating experiments show that the non-orientated CO₂⁻ radicals are significantly less stable than the orientated. This fact on its own would have serious implications for dose estimations, implying massive underestimations. It turns out, however, that with the heating induced decline of the non-orientated CO₂⁻ radicals, a larger number of orientated CO₂⁻ radicals is created. It is presently unclear whether these two processes are directly connected. In spite of very large internal reorganisations during these processes, powder spectra are only little affected by heating, because the powder spectra of both CO₂⁻ radicals are closely similar.The maximum differences that are observed on powder spectra in post-irradiation heating experiments, are in the range of 3%, dose values may be affected by a similar amount. However, when using preheating steps, which would occur when applying post-irradiation heating protocols to single aliquots, the thermal behaviour of the irradiated samples is quite different. While the annihilation of the non-orientated CO₂⁻ radicals has about the same decay rate in preheated and non-preheated samples, the increase of the orientated CO₂⁻ radicals is less pronounced in the preheated samples. As a result, overall intensity changes become critically dependent on the preheating times. The observed increase in signal intensity is in contrast to long-term fading experiments that showed that the ESR intensity of irradiated samples actually decreased over 6–12 years after laboratory irradiation. In view of this complexity and the small amount of quantitative information available, it is presently not possible to recommend any pre- or post-irradiation protocols.The good news for ESR dating is that any systematic errors introduced by a different mix of orientated and non-orientated CO₂⁻ radicals in the natural and irradiation spectra seem relatively small (<5%). At present, the most reliable way for the dose estimation of fragments seems to measure the samples rotating around the three principal axes and to merge the spectra to produce a powder-equivalent spectrum and use this for the construction of the dose response curve.     

Luminescence dating of irrigation systems: Application to a qanat in Aragón,Spain

Optically stimulated luminescence (OSL) techniques have been applied to investigate the potential for dating the deposition of upcast mounds associated with qanat ventilation shafts at the site of a medieval qanat located in Aragón, Spain. Coarse quartz grains, extracted from sediment samples taken from excavated sections of several mounds, possessed sufficiently strong OSL to enable an evaluation of equivalent dose by applying the single aliquot regenerative procedure to small aliquots, each containing an individual bright grain. The OSL dates for both palaeosol and overlying upcast indicate that a chronostratigraphic record has been preserved within the mounds investigated, and micromorphological analysis of thin sections of sediment blocks taken from the mounds is shown to provide an essential means of verifying the characteristics of the strata, in particular, the critical interface of upcast and the ancient ground surface. The earliest OSL dates for basal deposits taken from two separate sections of the same mound are in agreement, placing the mound construction during the first half of the 13th century A.D. However, in two other mounds the OSL dates for the deposition of upcast are internally consistent with the stratigraphy but significantly later, dating to the 16th and 17th centuries A.D. We interpret the differences between the dates for the upcast deposition to be the result of partial erosion of the upper shaft and later repair of the mounds, and this finding underlines the importance of both examining multiple mounds in the same qanat system and the internal structure of each sampled mound. This exploratory work demonstrates the potential for wider application of OSL for dating this important type of subterranean irrigation feature in the study of both the archaeology of human settlement and palaeoenvironmental change in arid regions.     

Geological analysis and FT dating of the large-scale right-lateral strike-slip movement of the Red River fault zone

Tectonically, the large-scale right-lateral strike-slip movement along the Red River fault zone is char-acterized at its late phase with the southeastward extension and deformation of the Northwestern Yunnan normal fault depression on its northern segment, and the dextral shear displacement on its central-southern segment. Research of the relations between stratum deformation and fault movement on the typical fault segments, such as Jianchuan, southeast Midu, Yuanjiang River, Yuanyang, etc. since the Miocene Epoch shows that there are two times dextral faulting dominated by normal shearing occurring along the Red River fault zone since the Miocene Epoch. The fission track dating (abbrevi-ated to FT dating, the same below) is conducted on apatite samples collected from the above fault segments and relating to these movements. Based on the measured single grain’s age and the con-fined track length, we choose the Laslet annealing model to retrieve the thermal history of the samples, and the results show that the fault zone experienced two times obvious shear displacement, one in 5.5 ± 1.5 MaBP and the other in 2.1± 0.8 MaBP. The central-southern segment sees two intensive uplifts of mountain mass in the Yuanjiang River-Yuanyang region at 3.6―3.8 MaBP and 1.6―2.3 MaBP, which correspond to the above-mentioned two dextral normal displacement events since the late Miocene Epoch.