Astronomical forcing in Upper Miocene continental sequences: implications for the Geomagnetic Polarity Time Scale

We present an integrated stratigraphic study of cyclically bedded distal alluvial fan to lacustrine deposits in the late Miocene continental sections of Cascante and Cañizar (Teruel basin, NE Spain). The cyclostratigraphic analysis reveals that different scales of sedimentary cyclicity are present with a thickness ratio of about 1:2:5. Spectral analysis of colour records in the depth domain indicates the presence of a significant peak at ∼2.2 m, which corresponds to the average thickness of the basic, mudstone-carbonate, cycle. Other peaks correspond to the large-scale cycle, which consists of clusters of five basic cycles, and to a cycle twice the average thickness of the basic cycle. Magnetostratigraphic results, in combination with small-mammal biostratigraphy, indicate that the three normal polarity intervals recorded in our sections correspond to C5n.2n, C5n.1n and C4Ar.2n. Assigning the ages of CK95 to the polarity reversals implies significant changes in sedimentation rate, which is not in agreement with the regularity of the sedimentary cyclicity. Thus, spectral analysis of high-resolution colour records in the time domain only produce a spectrum that is consistent with Milankovitch climate forcing, if several of the assigned age tie points are excluded. This indicates that the sedimentary cyclicity in these sections is related to astronomical variations in climate and that the ages of reversal boundaries are in error. Hence, we have calculated the astronomical durations for C4Ar.2n (87 ky), C4Ar.3r (54 ky), C5n.1n (141 ky), and C5n.1r (33 ky), which indeed show significant discrepancies with CK95. The duration pattern of our polarity intervals is confirmed by seafloor anomaly profiles and magnetostratigraphic records of deep-sea cores. Consequently, this study demonstrates that astronomically forcing in continental sequences can be a powerful tool to improve the fundamental dating of the geological record.     

Evidences of the Blake and Iceland Basin magnetic excursions in southeastern Iberia and chronological implications for the Padul sedimentary record

The Padul-15-05 sediment core provides an exceptional perspective of the paleoenvironmental and climate change in the Western Mediterranean region for the last ca. 200 kyr. However, even though a robust chronology mainly relying on radiometric dating is available for the last 50 ka, the chronology for the older sediments is not yet fully resolved. Ages for the bottom part of the core (>21 m) were previously inferred from amino-acid racemization dating and sediment accumulation rates. In this work, we provide a more accurate chronology for the older part (>100 kyr) of the Padul-15-05 sediment core record based on the recognition of past Earth's magnetic excursions. We identify an interval prone of reversed polarity samples close to MIS-5e/5 d transition that we correlate to the Blake geomagnetic excursion (116.5 kyr–112 kyr). In addition, we identify an interval of low inclinations and two reversed samples that we interpret as the Iceland Basin geomagnetic excursion (192.7 kyr–187.7 kyr: wide scenario of VGP <40°). Our new results, which include IRM acquisition curves that contribute to understand the magnetic mineralogy, enhances the robustness of the age model for the Padul-15-05 sedimentary sequence by adding an independent age dataset with new accurate tie-points. Our refined age control together with the available paleoenvironmental and paleoclimate multiproxy data provide insightful information to unveil the response of the western Mediterranean environments to regional environmental and climate change.     

Instability of plane parallel shear flow (toward a mechanistic picture of how it works)

This paper reviews work done over the last twelve years on wave overreflection in shear flows, and on the development of a mechanical picture of how overreflection and instability work. It is argued that the wave geometry of a flow configuration is the primary determinant of its stability. It is also argued that the primary mechanism for wave amplification is the Orr mechanism.     

地磁实测值与IGRF计算值的差异的变化

选择了北京、关岛等6个地磁台,作它们的观测值与IGRF值之差随时间的变化曲线,结果发现,以上6台站地磁测值的异常变化都与附近发生的大震相关,而且震级越大、离台站越近,异常变化越大、越早.而且用IGRF作参考场既可靠又方便.     

Evolution of the Quaternary melitite-nephelinite Herchenberg volcano (East Eifel)

The Quaternary Herchenberg composite tephra cone (East Eifel, FR Germany) with an original bulk volume of 1.17·10⁷ m³ (DRE of 8.2·10⁶ m³) and dimensions of ca. 900·600·90 m (length·width·height) erupted in three main stages: (a) Initial eruptions along a NW-trending, 500-m-long fissure were dominantly Vulcanian in the northwest and Strombolian in the southeast. Removal of the unstable, underlying 20-m-thick Tertiary clays resulted in major collapse and repeated lateral caving of the crater. The northwestern Lower Cone 1 (LC1) was constructed by alternating Vulcanian and Strombolian eruptions. (b) Cone-building, mainly Strombolian eruptions resulted in two major scoria cones beginning initially in the northwest (Cone 1) and terminating in the southeast (Cones 2 and 3) following a period of simultaneous activity of cones 1 and 2. Lapilli deposits are subdivided by thin phreatomagmatic marker beds rich in Tertiary clays in the early stages and Devonian clasts in the later stages. Three dikes intruded radially into the flanks of cone 1. (c) The eruption and deposition of fine-grained uppermost layers (phreatomagmatic tuffs, accretionary lapilli, and Strombolian fallout lapilli) presumably from the northwestern center (cone 1) terminated the activity of Herchenberg volcano. The Herchenberg volcano is distinguished from most Strombolian scoria cones in the Eifel by (1) small volume of agglutinates in central craters, (2) scarcity of scoria bomb breccias, (3) well-bedded tephra deposits even in the proximal facies, (4) moderate fragmentation of tephra (small proportions of both ash and coarse lapilli/bomb-size fraction), (5) abundance of dense ellipsoidal juvenile lapilli, and (6) characteristic depositional cycles in the early eruptive stages beginning with laterally emplaced, fine-grained, xenolith-rich tephra and ending with fallout scoria lapilli. Herchenberg tephra is distinguished from maar deposits by (1) paucity of xenoliths, (2) higher depositional temperatures, (3) coarser grain size and thicker bedding, (4) absence of glassy quenched clasts except in the initial stages and late phreatomagmatic marker beds, and (5) predominance of Strombolian, cone-building activity. The characteristics of Herchenberg deposits are interpreted as due to a high proportion of magmatic volatiles (dominantly CO₂) relative to low-viscosity magma during most of the eruptive activity.     

Geomagnetic field intensity during the Plio-Pleistocene derived from the thermo-remanence of porcellanites and palaeo-slags (Czechoslovakia)

Summary The present paper deals with the derivation of the intensity of the geomagnetic field in the Plio-Pleistocene, Central Europe. The intensity was derived from the thermo-remanence of porcellanites and palaeo-slags. These rocks represent a common product of intense thermal alteration of loams due to spontaneous combustion of coal seams. Porcellanites and palaeo-slags show outstanding palaeomagnetic properties, their remanent magnetization is of thermo-remanent origin and they were mineralogically stabilized under natural conditions in the geological past, during the coal combustion. It was found, that the intensity of the geomagnetic field during the Plio-Pleistocene oscillated about the value of the present-day intensity.     

Phase shift (time) between storm-time maximum negative excursions of geomagnetic disturbance index Dst and interplanetary Bz

The evolutions of severe geomagnetic storms (D_st<−200 nT) during solar cycle 23 were examined. For each storm, certain timing landmarks (starting of increases of interplanetary total field B, its B_z component, D_st changes, etc.) were noted and from these, various antecedence intervals were calculated. It was noticed that the various delays varied in a very wide range from storm to storm. Thus, some storms had a warning of only 4 h at the ACE location, while others had a warning of up to 30 h. These variations do not depend upon the Sun–Earth transit time. Also, faster interplanetary structures do not necessarily give quicker or stronger D_st evolutions, though larger negative B_z seems to give stronger negative D_st, but not necessarily earlier.     

Quaternary faults and seismicity in the Umbro-Marchean Apennines (Central Italy): evidence from the 1997 Colfiorito earthquake

Analyses of structural and geomorphological data combined with remote sensing interpretation confirm previous knowledge on the existence of an extensional Quaternary tectonic regime in the Colfiorito area (Umbro-Marchean Central Apennines). This is characterized by a maximum principal axis of finite strain oriented approx. NE–SW, which is the result of a progressive deformation process due to pure and radial extension. Surface geological data, the crustal tectonic setting (reconstructed using a CROP 03 seismic reflection profile), and seismological data relative to the autumn 1997 Colfiorito earthquake sequence constrain the following seismotectonic model. We interpret the seismogenic SW-dipping low-angle normal fault pictured by seismic data as an inverted thrust ramp located in the basement at depth between 5 and 10 km. The surface projection of this seismogenic structure defines a crustal box within which high-angle normal faults are responsible for the deformation of the uppermost crust. The regional patterns of pre-existing basement thrusts therefore control the seismotectonic zoning of the area that cannot be directly related to the high-angle normal fault systems which cut through different crustal boxes; the latter system records, in fact, re-shear along pre-existing normal faults. Moreover, Quaternary slip-rates relative to high-angle normal faults in the Central Apennines are closely related to seismic hazard within each crustal box.     

Lava flow internal structure found from AMS and textural data: An example in methodology from the Chaîne des Puys,France

Anisotropy of magnetic susceptibility (AMS) data analysis is a convenient method used to investigate strain and flow during lava flow emplacement. In order to make a sound interpretation, the origin of the AMS signal must be verified. Two questions must be answered: 1) what phase, or phases carry the AMS signal and 2) when was the AMS fabric acquired? The verification steps themselves can provide extra data for interpreting lava flow conditions. Here, we present a methodology to answer the two questions in a 6 km-long Chaîne des Puys trachybasaltic lava flow that descended into the future site of Clermont Ferrand (France) 45,000 years ago. Knowledge of lava flow emplacement will be useful specifically to this site, if a reactivation of the volcanic chain occurs. The results are also of more general interest to understand lava flow emplacement dynamics.     

Geochemistry of Quaternary travertines in the region north of Rome (Italy): structural, hydrologic and paleoclimatic implications

In the Tyrrhenian region of central Italy, late Quaternary fossil travertines are widespread along two major regional structures: the Tiber Valley and the Ancona-Anzio line. The origin and transport of spring waters from which travertines precipitate are elucidated by chemical and isotopic studies of the travertines and associated thermal springs and gas vents. There are consistent differences in the geochemical and isotopic signatures of thermal spring waters, gas vents and present and fossil travertines between east and west of the Tiber Valley. West of the Tiber Valley, δ¹³C of CO₂ discharged from gas vents and δ¹³C of fossil travertines are higher than those to the east. To the west the travertines have higher strontium contents, and gases emitted from vents have higher ³He/⁴He ratios and lower N₂ contents, than to the east. Fossil travertines to the west have characteristics typical of thermogene (thermal spring) origin, whereas those to the east have meteogene (low-temperature) characteristics (including abundant plant casts and organic impurities). The regional geochemical differences in travertines and fluid compositions across the Tiber Valley are interpreted with a model of regional fluid flow. The regional Mesozoic limestone aquifer is recharged in the main axis of the Apennine chain, and the groundwater flows westward and is discharged at springs. The travertine-precipitating waters east of the Tiber Valley have shallower flow paths than those to the west. Because of the comparatively short fluid flow paths and low (normal) heat flow, the groundwaters to the east of the Tiber Valley are cold and have CO₂ isotopic signatures, indicating a significant biogenic contribution acquired from soils in the recharge area and limited deeply derived CO₂. In contrast, spring waters west of the Tiber Valley have been conductively heated during transit in these high heat-flow areas and have incorporated a comparatively large quantity of CO₂ derived from decarbonation of limestone. The elevated strontium content of the thermal spring water west of the Tiber Valley is attributed to deep circulation and dissolution of a Triassic evaporite unit that is stratigraphically beneath the Mesozoic limestone. U-series age dates of fossil travertines indicate three main periods of travertine formation (ka): 220-240, 120-140 and 60-70. Based on the regional flow model correlating travertine deposition at thermal springs and precipitation in the recharge area, we suggest that pluvial activity was enhanced during these periods. Our study suggests that travertines preserve a valuable record of paleofluid composition and paleoprecipitation and are thus useful for reconstructing paleohydrology and paleoclimate.     

Constraining the age of Quaternary megafloods in the Altai Mountains (Russia) using luminescence

Some of the largest catastrophic outbursts of periglacial lakes known in the geological history of the Earth have been identified in the Altai Mountains. Traces of these events are recorded in the form of large terraces, predominantly composed of gravel material with numerous horizons of large boulders and blocks. Determining the age of these large-scale events is difficult due to the lack of suitable material (e.g. organics, well-bleached sand) and the specific genesis of these sediments. The results of cosmogenic radionuclide dating suggest a post-LGM age both for the source of the flood water and for different elements of the catafluvial terraces in the Chuya and Katun river valleys. Nevertheless, the age(s) of catastrophic breakthrough remains controversial. On the basis of a few IRSL ages, and geological and other evidence, some view the event as occurring around MIS 5. In this study, we investigate loess-like loams overlying the catafluvial sediments on the surface of the highest level terrace, ∼200 m above present river level. A total of 24 samples for luminescence dating were obtained, for which the OSL, IR₅₀, and pIRIR_50,290 signals were measured to control the degree of signal zeroing and the dating reliability. The age of the loess in all three pits was from 0.5 ka at the top to 23 ka at the base of the loess strata. From a sand layer in the top of the catafluvial deposits, two ages of ∼85–90 ka were obtained from feldspar pIRIR_50,290. These results provide a minimum pre-LGM age for the geomorphological surface of a major catafluvial terrace in the Altai Mountains.     

A GIS-Based GOD Model and Hazard Index Analysis: The Quaternary Coastal Collo Aquifer (NE-Algeria)

The quaternary coastal Collo aquifer in northeast Algeria (NE Algeria) marks an important local water resource supporting domestic, industrial and agricultural activities. The aquifer shows signs of contamination due to the existence of various pollution sources, especially nitrogen compounds. Focusing the local identification of key vulnerable zones and related main hazard types for wise future water management, the present study highlights results from a coupled analysis of the well-established Geographical Information System (GIS)-based GOD (groundwater occurrence, overall aquifer class, depth to groundwater) hazard index analysis and the COST Action 620 plan. Most prevalent hazard types in the study area were identified as the urban/residential areas without public sewage systems, landfill and agricultural/pasturing areas. Regarding the vulnerability analysis particularly the northern aquifer region is endangered, dominated by high (22.4%) and moderate (27.4%) vulnerability classes. Central, western and southern aquifer regions are characterized by low (23.3%) and very low (26.9%) vulnerability classes. Overall, these GOD-derived results are in good agreement with earlier results obtained by the more complex DRASTIC approach. Final risk assessment and validation related to 2014/2015 nitrate sampling campaigns indicate that “high risk” and “very high risk” classes only apply to a small part of the study area in the northern sector (8%), whereas the main part (>60%) broadly affecting the central, western and southern sector only bears a low to very low risk of water pollution. Apart from a future-oriented groundwater abstraction strategy it is recommended to update the evaluation regularly to effectively consider dynamic changes of local anthropogenic activities and hazards.     

Breakdown of boundary layers: (i) on moving surfaces; (ii) in semi-similar unsteady flow; (iii) in fully unsteady flow

Abstract

The breakdown and separation or reattachment of boundary layers adjoining a mainstream are studied in the three related situations (i)-(iii) of the title. For (i) the classical steady boundary layer generally admits a logarithmic singularity in the displacement when breakdown occurs on a downstream-moving surface whereas the corresponding singularity for an upstream-moving surface can be logarithmic or of minus-one-sixth form. Conversely, the breakdown can be delayed to the onset of zero mainstream flow, in which case the displacement singularity is again logarithmic. In certain flows these singularities prove to be removable locally, yielding a breakaway separation or reattachment and including the first known successes of a classical strategy in describing large-scale separation. Other flows, by contrast, require an interactive strategy. Again, even on a fixed surface a breakdown different from Goldstein's can be produced if there is a moving section of surface further upstream. The application to (ii), semi-similar unsteady boundary layers, e.g. near an impulsively started wedge-like trailing edge, then follows readily and predicts analogous forms of singularity. The corresponding singularity in displacement predicted for fully unsteady classical boundary layers, (iii), occurs within a finite time and, like (i) (usually) and (ii), a three-tiered breakdown is involved at first. Subsequently interaction comes into play. Comparisons with numerical and/or earlier work are noted. In all three situations (i)-(iii), although the dynamics involved near breakdown, separation or reattachment are predominantly inviscid, the presence of small viscosity is of significance in enforcing smoothness of the local velocity profiles.     

Field evidence of seismites in Quaternary deposits of the Jijel (Eastern Algeria) coastal region

Jijel has been hit by a strong earthquake in 1856 that triggered a destructive tsunami. Field geological investigations show that the marine terrace deposits (Tyrrhenian or likely Eutyrrhenian) exhibit several types of soft sediment deformation features including sismoslumps, thixotropic bowls, thixotropic wedges, and diapir-like structures. In addition, paleo-liquefaction features represented by neptunian and injection dikes have been observed in the sand dune deposits (Aterian or Würm). Furthermore, typical paleo-earthquake-induced ground failures including lateral spreading, paleo-landslides, and sand volcanoes have been observed in recent, likely, Holocene deposits. Such features, remarkably comparable to present-day earthquake-induced ground failures showing clearly repetitive occurrence of past events may constitute a precious material for future paleo-seismic investigation. The various features have been interpreted herein as seismites associated to strong earthquakes produced likely by the potentially active faults previously identified in the area.     

Variations of local seismic response in Benevento (Southern Italy) using earthquakes and ambient noise recordings

The city of Benevento (Southern Italy) has been repeatedly struck by large historical earthquakes. A heterogeneous geologic structure and widespread soft soil conditions make the estimation of site effects crucial for the seismic hazard assessment of the city. From 2000 until 2004, we installed seismic stations to collect earthquake data over zones with different geological conditions. Despite the high level of urban noise, we recorded more than 150 earthquakes at twelve sites. This data set yields the first, well documented experimental evidence for weak to moderate local amplifications. We investigated site effects primarily by the classical spectral ratio technique (CSR) using a rock station placed on the Benevento hill as reference. All sites in the Calore river valley and in the eastern part of the Benevento hill show a moderate high-frequency (f > 4 Hz) amplification peak. Conversely, sites in the Sabato river valley share weak-to-moderate amplification in a wide frequency band (from 1–2 to 7–10 Hz), without evident frequency peaks. Application of no-reference-site techniques to earthquake and noise data confirms the results of the CSRs in the sites of the Calore river valley and of the eastern part of the Benevento hill, but fails in providing indications for site effects in the Sabato river valley, being the H/V ratios nearly flat. One-dimensional modeling indicates that the ground motion amplification can be essentially explained in terms of a vertically varying geologic structure. High-frequency narrow peaks are caused by the strong impedance contrast existing between near-surface soft deposits and stiff cemented conglomerates. Conversely, broad-band amplifications in the Sabato river valley are likely due to a more complex layering with weak impedance contrasts both in the shallow and deep structure of the valley.     

Petrography and uplift history of the Quaternary Takidani Granodiorite: could it have hosted a supercritical (HDR) geothermal reservoir?

The Quaternary Takidani Granodiorite (Japan Alps) is analogous to the type of deep-seated (3–5 km deep) intrusive-hosted fracture network system that might support (supercritical) hot dry/wet rock (HDR/HWR) energy extraction. The I-type Takidani Granodiorite comprises: porphyritic granodiorite, porphyritic granite, biotite-hornblende granodiorite, hornblende-biotite granodiorite, biotite-hornblende granite and biotite granite facies; the intrusion has a reverse chemical zonation, characterized by >70 wt% SiO₂ at its inferred margin and <67 wt% SiO₂ at the core. Fluid inclusion evidence indicates that fractured Takidani Granodiorite at one time hosted a liquid-dominated, convective hydrothermal system, with <380°C, low-salinity reservoir fluids at hydrostatic (mesothermal) pressure conditions. ‘Healed’ microfractures also trapped >600°C, hypersaline (35 wt% NaCl_eq) fluids of magmatic origin, with inferred minimum pressures of formation being 600–750 bar, which corresponds to fluid entrapment at 2.4–3.0 km depth. Al-in-hornblende geobarometry indicates that hornblende crystallization occurred at about 1.45 Ma (7.7–9.4 km depth) in the (marginal) eastern Takidani Granodiorite, but later (at 1.25 Ma) and shallower (6.5–7.0 km) near the core of the intrusion. The average rate of uplift across the Takidani Granodiorite from the time of hornblende crystallization has been 5.1–5.9 mm/yr (although uplift was about 7.5 mm/yr prior to 1.2 Ma), which is faster than average uplift rates in the Japan Alps (3 mm/yr during the last 2 million years). A temperature–depth–time window, when the Takidani Granodiorite had potential to host an HDR system, would have been when the internal temperature of the intrusive was cooling from 500°C to 400°C. Taking into account the initial (7.5 mm/yr) rate of uplift and effects of erosion, an optimal temperature–time–depth window is proposed: for 500°C at 1.54–1.57 Ma and 5.2±0.9 km (drilling) depth; and 400°C at 1.36–1.38 Ma and 3.3±0.8 km (drilling) depth, which is within the capabilities of modern drilling technologies, and similar to measured temperature–depth profiles in other active hydrothermal systems (e.g. at Kakkonda, Japan).     

Late Quaternary Activity of the Chuxiong-Nanhua Fault and the 1680 Chuxiong M_S6(3/4) Earthquake

In this paper,according to the results of the satellite imagery interpretation and field investigation,we study the active features and the latest active times of the ChuxiongNanhua fault,the Quaternary basins formation mechanism,and the relationship between the fault and the 1680 Chuxiong M_S6 3/4earthquake. Several Quaternary profiles at Lvhe,Nanhua reveal that the fault has offset the late Pleistocene deposits of the T2 and T3 terraces of Longchuan river, indicating that the fault was obviously active in late Quaternary. The Chuxiong-Nanhua fault has been dominated by dextral strike slip motion in the late Quaternary,with an average rate of 1. 6-2. 0 mm/a. Several pull apart Quaternary basins of Chuxiong,Nanhua,and Ziwu etc. have developed along the fault.The 1680 Chuxiong M_S6 3/4earthquake and several moderate earthquakes have occurred near the fault. The Chuxiong-Nanhua fault are the seismogenic structure of those earthquakes,the latest fault movement was in the late-Pleistocene,and even the Holocene.In large area,the Chuxiong-Nanhua fault and the eastern Qujiang fault and the Shiping fault composed a set of NW-trending oblique orientation active faults,and the motion characteristics are all mainly dextral strike slip. The motion characteristics,like the red river fault of the Sichuan-Yunnan Rhombic Block southwestern boundary,are concerned with the escaping movement of the Sichuan-Yunnan Rhombic Block.     

Contribution of ambient vibration recordings (free-field and buildings) for post-seismic analysis: The case of the Mw 7.3 Martinique (French Lesser Antilles) earthquake,November 29, 2007

Following the Mw 7.3 Martinique earthquake, November 29^th, 2007, a post-seismic survey was conducted by the Bureau Central Sismologique Français (BCSF) for macroseismic intensities assessment. In addition to the inventories, ambient vibration recordings were performed close to the particularly damaged zones in the free-field and the buildings. The objective of the paper is to show the relevancy of performing ambient vibration recordings for post-earthquake surveys. The analyses of the recordings aim at explaining the variability of the damages through site effects, structure vulnerability or resonance phenomena and to help the characterization of the post-seismic building integrity. In three sites prone to site effects, we suspect damage to be related to a concordance between soil fundamental frequency and building resonance frequency. Besides, the recordings of ambient vibrations at La Trinité hospital before and after the earthquake allow us to quantify the damage due to earthquake in terms of stiffness loss.