U–Pb dating,geochemistry, and Sr–Nd isotopic composition of a granodiorite porphyry from the Jiadanggen Cu–(Mo) deposit in the Eastern Kunlun metallogenic belt,Qinghai Province,China

The Jiadanggen porphyry Cu–(Mo) deposit is newly discovered and located in the Eastern Kunlun metallogenic belt of Qinghai Province, China. Here, we present a detailed study of the petrogenesis, magma source, and tectonic setting of the mineralization causative granodiorite porphyry. The new data indicate that the granodiorite porphyry is characterized by high SiO₂ (68.21–70.41 wt.%) and Al₂O₃, relatively high K₂O, low Na₂O, and low MgO and CaO concentrations, and is high-K calc-alkaline and peraluminous. The granodiorite porphyry has low Mg^# (38–46) values that are indicative of no interaction between the magmas and the mantle. The samples that we have examined have low Nb/Ta (9.17–10.3) and Rb/Sr (0.28–0.39) ratios, which are indicative of crustal-derived magmas. Source region discrimination diagrams indicate that the magmas that formed the granodiorite porphyry were derived from melting of a mixed amphibolite source in the lower crust. The samples have I_Sr values of 0.70954–0.70979, ε_Nd(t) values of − 8.3 to − 7.9, and t_2DM ages ranging from 1644 to 1677 Ma. These indicate that the magmas that formed this intrusion were generated by melting of Mesoproterozoic lower crustal material. Higher K(Rb) contents of the samples indicate that the magma source is high potassium basaltic material in the lower crust, which could be derived from an enriched mantle source. LA-ICP-MS zircon U–Pb dating of the granodiorite porphyry yields a late Indosinian age (concordia age of 227 ± 1 Ma; MSWD = 0.31), which is close to the molybdenite Re–Os isochron age (227.2 ± 1.9 Ma), indicating further the close relationship between the granodiorite porphyry and the Cu–(Mo) mineralization. These samples are LREE and LILE (e.g., Rb, K, Ba, and Sr) enriched, and HFSE (e.g., Nb, Ta, P, and Ti) depleted, especially in P and Ti, similar to the characteristics of volcanic arc magmas. This intrusion most likely formed during the later stage of Indosinian deep subduction of oceanic slab. This was associated with underplating of mantle-derived magmas, which provided heat for crustal melting. Similar to the Jiadanggen granodiorite porphyry, Indosinian hypabyssal intermediate-felsic intrusive rocks, formed under subduction tectonism or a transitional regime from subduction to syn-collision, make up the most important targets for porphyry Cu(Mo) deposits in the Eastern Kunlun metallogenic belt.     

Geochronology and geochemistry of the Wunugetushan porphyry Cu–Mo deposit in NE china,and their geological significance

The Wunugetushan porphyry Cu–Mo deposit is located in the Manzhouli district of NE China, on the southern margin of the Mesozoic Mongol–Okhotsk Orogenic Belt. Concentric rings of hydrothermal alteration and Cu–Mo mineralization surround an Early–Middle Jurassic monzogranitic porphyry. The Cu–Mo mineralization is clearly related to the quartz–potassic and quartz–sericite alteration. Molybdenite Re–Os and groundmass ⁴⁰Ar/³⁹Ar of the host porphyry dates indicate that the ore-formation and porphyry-emplacement occurred at 177.6 ± 4.5 Ma and 179.0 ± 1.9 Ma, respectively. Geochemically, the host porphyry of the deposit is characterized by strong LREE/HREE fractionation, enrichment in LILE, Ba, Rb, U, Th and Pb, and depletion of HFSE, Nb, Ta, Ti and HREE. The Sr–Nd–Pb isotopic compositions of the porphyry display an varied initial (⁸⁷Sr/⁸⁶Sr)_i ratio, a positive ε_Nd(t) values and high ²⁰⁶Pb/²⁰⁴Pb_t, ²⁰⁷Pb/²⁰⁴Pb_t and ²⁰⁸Pb/²⁰⁴Pb_t ratios. These data indicate that the magmatic source of the host porphyry comprised two end-members: lithospheric mantle metasomatized by fluids derived from the subducted slab; and continental crust. We infer that the primitive magma of the host porphyry was derived from crust–mantle transition zone. Based on regional geology and geochemistry of the host porphyry, the Wunugetushan deposit is suggested to form in a continental collision environment after closure of the Mongol–Okhotsk Ocean.     

Geochronology and fluid inclusion study of the Yinjiagou porphyry–skarn Mo–Cu–pyrite deposit in the East Qinling orogenic belt,China

The Yinjiagou Mo–Cu–pyrite deposit of Henan Province is located in the Huaxiong block on the southern margin of the North China craton. It differs from other Mo deposits in the East Qingling area because of its large pyrite resource and complex associated elements. The deposit’s mineralization process can be divided into skarn, sulfide, and supergene episodes with five stages, marking formation of magnetite in the skarn episode, quartz–molybdenite, quartz–calcite–pyrite–chalcopyrite–bornite–sphalerite, and calcite–galena–sphalerite in the sulfide episode, and chalcedony–limonite in the supergene episode. Re–Os and ⁴⁰Ar–³⁹Ar dating indicates that both the skarn-type and porphyry-type orebodies of the Yinjiagou deposit formed approximately 143 Ma ago during the Early Cretaceous. Four types of fluid inclusions (FIs) have been distinguished in quartz phenocryst, various quartz veins, and calcite vein. Based on petrographic observations and microthermometric criteria the FIs include liquid-rich, gas-rich, H₂O–CO₂, and daughter mineral-bearing inclusions. The homogenization temperature of FIs in quartz phenocrysts of K-feldspar granite porphyry ranges from 341 °C to >550 °C, and the salinity is 0.4–44.0 wt% NaCl eqv. The homogenization temperature of FIs in quartz–molybdenite veins is 382–416 °C, and the salinity is 3.6–40.8 wt% NaCl eqv. The homogenization temperature of FIs in quartz–calcite–pyrite–chalcopyrite–bornite–sphalerite ranges from 318 °C to 436 °C, and the salinity is 5.6–42.4 wt% NaCl eqv. The homogenization temperature of FIs in quartz–molybdenite stockworks is in a range of 321–411 °C, and the salinity is 6.3–16.4 wt% NaCl eqv. The homogenization temperature of FIs in quartz–sericite–pyrite is in a range of 326–419 °C, and the salinity is 4.7–49.4 wt% NaCl eqv. The ore-forming fluids of the Yinjiagou deposit are mainly high-temperature, high-salinity fluids, generally with affinities to an H₂O–NaCl–KCl ± CO₂ system. The δ¹⁸O_H2O values of ore-forming hydrothermal fluids are 4.0–8.6‰, and the δD_V-SMOW values are between −64‰ and −52‰, indicating that the ore-forming fluids were primarily magmatic. The δ³⁴S_V-CDT values of sulfides range between −0.2‰ and 6.3‰ with a mean of 1.6‰, sharing similar features with deeply sourced sulfur, implying that the sulfur mainly came from the lower crust composed of poorly differentiated igneous materials, but part of the heavy sulfur came from the Guandaokou Group dolostone. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb values of sulfides are in the range of 17.331–18.043, 15.444–15.575, and 37.783–38.236, respectively, which is generally consistent with the Pb isotopic signature of the Yinjiagou intrusion, suggesting that the Pb chiefly originated from the felsic–intermediate intrusive rocks in the mine area, with a small amount of lead from strata. The Yinjiagou deposit is a porphyry–skarn deposit formed during the Mesozoic transition of a tectonic regime that is EW-trending to NNE-trending, and the multiepisode boiling of ore-forming fluids was the primary mechanism for mineral deposition.     

Geology,geochemistry, and geochronology of the Wangjiazhuang porphyry–breccia Cu(–Mo) deposit in the Zouping volcanic basin,eastern North China Block

The Wangjiazhuang porphyry–breccia Cu(–Mo) deposit is located in the Zouping volcanic basin, western Shandong Province. Seven molybdenite samples yield a Re–Os weighted mean age of 127.8 ± 0.7 Ma (2σ), which is identical within error to the zircon weighted mean ²⁰⁶Pb/²³⁸U age of 128.3 ± 1.3 Ma (2σ) determined for quartz monzonite samples. The host rock is characterized by high concentrations of K₂O (4.26–4.53 wt.%), Na₂O (4.97–5.76 wt.%), LILEs and LREEs, and high Mg# (> 40), and low concentrations of HFSEs and HREEs, with K₂O/Na₂O ratios of 0.76–0.88. The quartz monzonite also has high Sr/Y (69.9–112.5) and (La/Yb)_N (22.0–30.0) ratios, similar to adakitic rocks worldwide. Relatively low initial ⁸⁷Sr/⁸⁶Sr ratios (0.70549–0.70556), high ε_Nd(t) values (2.58–3.06), high radiogenic Pb [(²⁰⁶Pb/²⁰⁴Pb)i = 18.3424–18.4606, (²⁰⁷Pb/²⁰⁴Pb)_i = 15.5692–15.5985, (²⁰⁸Pb/²⁰⁴Pb)_i = 38.1714–38.2734] and high zircon ε_Hf(t) values (− 2.1 to + 4.3) indicate that the magma was likely derived from the partial melting of subducted oceanic crust which then reacted with the peridotitic mantle wedge. Both the breccia and porphyry ores have a narrow range of δ³⁴S (− 4.8 to + 2.1‰) and Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb = 18.295–18.402, ²⁰⁷Pb/²⁰⁴Pb = 15.551–15.573, and ²⁰⁸Pb/²⁰⁴Pb = 38.215–38.331), suggesting that the ore metals were extracted primarily from the quartz monzonite or similar source. Subduction of the Paleo-Pacific slab during the Early Cretaceous resulted in the formation of the Wangjiazhuang quartz monzonite and associated Cu(–Mo) deposit in western Shandong Province.     

Geochronology,geochemistry and Sr–Nd–Hf isotopes of the Haisugou porphyry Mo deposit,northeast China,and their geological significance

The Haisugou Mo deposit is located in the northern part of the Xilamulun Mo–Cu metallogenic belt in northeastern China. The Mo mineralization mainly occurs as quartz-molybdenite veins within the Haisugou granite, which was emplaced into rocks of the Early Permian Qingfengshan Formation. Zircon U–Pb dating by LA–ICP-MS of the granite yields a crystallization age of 137.6 ± 0.9 Ma, suggesting emplacement during the peak time of Mo mineralization in eastern China, broadly constrained to ca. 150–130 Ma, when tectonic stresses shifted from compression to extension. Whole-rock geochemical data suggest that the granite belongs to the high-K calc-alkaline series, and is characterized by relatively high LREE; low HREE; depletion of Ti, Ba, and Nb; and a moderate negative Eu anomaly. The zircon ε_Hf(t) and whole-rock ε_Nd(t) values for the intrusion range from +4.5 to +10.0 and +0.2 to +1.6, respectively, indicating that the magma originated from the juvenile lower crust source derived from depleted mantle, with some component of ancient continental crust. The granite is also characterized by initial (⁸⁷Sr/⁸⁶Sr)_i ratios ranging from 0.7040 to 0.7074, which suggest some contamination by the upper crust during the ascent of the primitive magma. Moreover, it can be recognized from the whole-rock major and trace element data that significant fractional crystallization occurred during magmatic evolution, with the separation of plagioclase and K-feldspar. Because Mo is an incompatible element and tends to concentrate in the melt during crystallization, fractionation processes likely played an important role in the formation of the Haisugou Mo deposit.     

Geochemical constraints on Cu–Fe and Fe skarn deposits in the Edong district,Middle–Lower Yangtze River metallogenic belt,China

Copper and iron skarn deposits are economically important types of skarn deposits throughout the world, especially in China, but the differences between Cu and Fe skarn deposits are poorly constrained. The Edong ore district in southeastern Hubei Province, Middle–Lower Yangtze River metallogenic belt, China, contains numerous Fe and Cu–Fe skarn deposits. In this contribution, variations in skarn mineralogy, mineralization-related intrusions and sulfur isotope values between these Cu–Fe and Fe skarn deposits are discussed.The garnets and pyroxenes of the Cu–Fe and Fe skarn deposits in the Edong ore district share similar compositions, i.e., dominantly andradite (Ad_29–100Gr_0–68) and diopside (Di_54–100Hd_0–38), respectively. This feature indicates that the mineral compositions of skarn silicate mineral assemblages were not the critical controlling factors for variations between the Cu–Fe and Fe skarn deposits. Intrusions associated with skarn Fe deposits in the Edong ore district differ from those Cu–Fe skarn deposits in petrology, geochemistry and Sr–Nd isotope. Intrusions associated with Fe deposits have large variations in their (La/Yb)_N ratios (3.84–24.6) and Eu anomalies (δEu = 0.32–1.65), and have relatively low Sr/Y ratios (4.2–44.0) and high Yb contents (1.20–11.8 ppm), as well as radiogenic Sr–Nd isotopes (εNd(t) = − 12.5 to − 9.2) and (⁸⁷Sr/⁸⁶Sr)_i = 0.7067 to 0.7086. In contrast, intrusions associated with Cu–Fe deposits are characterized by relatively high Sr/Y (35.0–81.3) and (La/Yb)_N (15.0–31.6) ratios, low Yb contents (1.00–1.62 ppm) without obvious Eu anomalies (δEu = 0.67–0.97), as well as (⁸⁷Sr/⁸⁶Sr)_i = 0.7055 to 0.7068 and εNd(t) = − 7.9 to − 3.4. Geochemical evidence indicates a greater contribution from the crust in intrusions associated with Fe skarn deposits than in intrusions associated with Cu–Fe skarn deposits. In the Edong ore district, the sulfides and sulfates in the Cu–Fe skarn deposits have sulfur isotope signatures that differ from those of Fe skarn deposits. The Cu–Fe skarn deposits have a narrow range of δ³⁴S values from − 6.2‰ to + 8.7‰ in sulfides, and + 13.2‰ to + 15.2‰ in anhydrite, while the Fe skarn deposits have a wide range of δ³⁴S values from + 10.3‰ to + 20.0‰ in pyrite and + 18.9‰ to + 30.8‰ in anhydrite. Sulfur isotope data for anhydrite and sedimentary country rocks suggest that the formation of skarns in the Edong district involved the interaction between magmatic fluids and variable amounts of evaporites in host rocks.     

Review of Mesozoic multiple magmatism and porphyry Cu–Mo (W) mineralization in the Yidun Arc,eastern Tibet Plateau

The Yidun Arc was formed in response to the westward subduction of Garze–Litang Ocean (a branch of Paleotethys) in the Late Triassic, where abundant porphyry Cu–Mo deposits (221–213 Ma) developed along the regional NW–SE sinistral faults and emplaced in the southern portion of the arc. The ore-related porphyries are mostly metaluminous or slightly peraluminous, belonging to shoshonitic high-potassium calc-alkaline I-type granites, with ε_Hf(t) values of −6.64 to +4.12. The ore-bearing magmas were probably derived from the partial melting of subduction-metasomatic-enriched mantle, with the contamination of underplated mafic materials. The Late Cretaceous (88–80 Ma) highly fractionated I-type granite belt and related porphyry Cu–Mo deposits and magmatic-hydrothermal Cu–Mo–W deposits occur along approximately N–S-trending faults in the Yidun Arc. This belt extended across the Yidun Arc and Garze–Litang suture zone to the north and across the Yangtze Craton to the south, intruding the Late Triassic porphyry belt. The ore-related porphyries are characterized by high silica and high total alkalis, with enrichment in large ion lithophile elements (LILEs; Rb, U and K) and depletion in high field strength elements (HFSE; Nb, Ta, P and Ti) and Ba. They have lower ε_Hf(t) values varying from −9.55 to −2.75, and significant negative Eu anomalies, indicating that the ore-bearing porphyritic magmas originated from ancient middle-upper crust. Two-stage magmatism and mineralization were superimposed in the Xiangcheng-Shangri-La district. Some ore deposits comprise two episodes of magmatism and associated mineralization such as both 207 ± 3.0 Ma granodiorite and 82.1 ± 1.2 Ma monzogranite intruded in the Xiuwacu deposit, causing Cu–Mo–W polymetallic mineralization. To date, 11 Late Triassic porphyry Cu deposits (e.g. the Pulang giant deposit with 5.1 Mt Cu), and five Late Cretaceous porphyry Cu–Mo (W) deposits (e.g. Tongchanggou Mo deposit with 0.59 Mt Mo) have been evaluated in the Xiangcheng-Shangri-La district. The continuity and inheritance of multiphase magmatism and the new understanding of superimposed mineralization will help to guide future exploration.     

Petrogenesis and metallogenic setting of porphyries of the Duobuza porphyry Cu–Au deposit,central Tibet,China

Given that the Duobuza deposit was the first porphyry Cu–Au deposit discovered in central Tibet, the mineralization and mineralized porphyry in this area have been the focus of intensive research, yet the overall porphyry sequence associated with the deposit remains poorly understood. New geological mapping, logging, and sampling of an early granodiorite porphyry, an inter-mineralization porphyry, and a late-mineralization diorite porphyry were complemented by LA–ICP–MS zircon dating, whole-rock geochemical and Sr–Nd isotopic analyses, and in situ Hf isotopic analyses for both inter- and late-mineralization porphyry intrusions. All of the porphyry intrusions are high-K and calc-alkaline, and were emplaced at ca. 120 Ma. The geochemistry of these intrusions is indicative of arc magmatism, as all three porphyry phases are enriched in light rare earth elements and large ion lithophile elements, and depleted in heavy rare earth elements and high field strength elements. These similar characteristics of the intrusions, when combined with the relatively high (⁸⁷Sr/⁸⁶Sr)_i, negative ε_Nd(t), and positive ε_Hf(t) values, suggest that the magmas that formed the porphyries were derived from a common source region and shared a single magma chamber. The magmas were generated by the mixing of upwelling metasomatized mantle-wedge-derived mafic magmas and magmas generated by partial melting of amphibolite within the lower crust.The inter-mineralization porphyry has the lowest ε_Nd(t) and highest (⁸⁷Sr/⁸⁶Sr)_i values, suggesting that a large amount of lower-crust-derived material was incorporated into the melt and that metals such as Cu and Au from the enriched lower crust were scavenged by the parental magma. The relative mafic late-mineralization diorite porphyry phase was formed by the residual magma in the magma chamber mixing with upwelling mafic melt derived from metasomatized mantle. The magmatic–hydrothermal evolution of the magma in the chamber released ore-forming fluid that was transported mainly by the inter-mineralization porphyry phase during the mineralization stage, which ultimately formed the Duobuza porphyry Cu–Au deposit.These porphyritic intrusions of the Duobuza deposit have high Mg^# and low (La/Yb)_N values, and show some high LILE/HFSE ratios, indicating the magma source was enriched by interaction with slab-derived fluids. Combined with age constraints on the regional tectonic evolution, these dating and geochemical results suggest that the Duobuza porphyry Cu–Au deposit formed in a subduction setting during the final stages of the northward subduction of the Neo-Tethyan Ocean.     

Geochronology and geochemistry of the Shilu Cu–Mo deposit in the Yunkai area,Guangdong Province,South China and its implication

Shilu is a large porphyry–skarn deposit in the Yunkai district in Guangdong Province, South China. The Shilu granitic intrusion in the mine area is a granodiorite which is genetically related to Cu mineralization. Plagioclase in the granodiorite has a zoned texture and is mainly andesine with minor amounts of labradorite, whereas the K-feldspars exhibit Carlsbad twins and some are also characterized by a zonal texture. K-feldspars from the granodiorite show high contents of Or (87–92 wt.%) with minor Ab (8–13 wt.%) and negligible An value of 0–0.3 wt.%. Biotite can be classified as magnesio-biotite, and is characterized by Mg-rich [Mg/(Mg + Fe) = 0.54–0.60] and Al^VI-low (average values = 0.11). Hornblende is chiefly magnesiohornblende and tschermakite. LA-ICP-MS zircon U–Pb age of the Shilu granodiorite is 107 ± 0.7 Ma, which is consistent with molybdenites Re–Os age of 104.1 ± 1.3 Ma. Geochemical data indicate that the Shilu granodiorite is silica-rich (SiO₂ = 63.43–65.03 wt.%) and alkali-rich (K₂O + Na₂O = 5.45–6.05 wt.%), as well as calcium-rich (CaO = 4.76–5.1 wt.%). Trace element geochemistry results show enrichments in large ion lithophile elements (e.g., Rb, K, and Ba) and depletions in some high field strength elements (e.g., Nb, P, Ta, and Ti). The total rare earth element (REE) content of the granodioritic rocks is low (∑ REE < 200 ppm), and is characterized by light REE enrichment [(La/Yb)_N > 9] and moderately negative Eu anomalies (Eu/Eu* = 0.83–0.90). These mineralogical, geochronological, and geochemical results suggest that the Shilu granodiorite has a mixed crust–mantle source with a geochemical affinity to I-type granitoids. Hornblende thermobarometry yielded magmatic crystallization temperatures of 686–785 °C and crystallization pressures between 1.0 and 2.34 kbar, which is converted to depths in a range of 3.31 to 7.71 km. Biotite thermobarometry yielded similar temperatures and lower pressures of 680–780 °C and 0.8–2 kbar (depth 2.64–6.6 km), respectively. The parent magma had a high oxygen fugacity. The Shilu granodiorite has a relatively low ε_Nd/t–t value and high (⁸⁷Sr/⁸⁶Sr)_i value, and Nd isotopes yield two-stage depleted mantle Nd model ages of 969–1590 Ma. Our new data, combined with previous studies, imply that the granodiorite and the associated Shilu Cu–Mo deposit was formed in an extensional environment, closely related to remelting of residual subducted slab fragments in the Jurassic.     

Control of magmatic oxidation state in intracontinental porphyry mineralization: A case from Cu (Mo–Au) deposits in the Jinshajiang–Red River metallogenic belt,SW China

The Jinshajiang–Red River porphyry Cu (Mo–Au) metallogenic belt (JRMB) is the most important intracontinental porphyry Cu (Mo–Au) mineralizing zone in the Sanjiang region, southwest China. The belt contains a number of giant deposits, including Yulong (6.50 Mt Cu) and Beiya (315 t Au) in the northern and center parts, and several small deposits in the southern part (e.g., Tongchang, 0.03 Mt Cu + Mo; Chang'anchong, 0.04 Mt Cu + Mo; Habo, 0.57 Mt Cu + Mo; and Chang'an 31 t Au). In order to investigate the mechanisms controlling the variation in size of these deposits, the LA-ICP-MS zircon U–Pb dating, bulk-rock geochemistry, and zircon trace-element analyses have been performed on the mineralization-related porphyries from the Tongchang district. Zircon U–Pb dating yielded concordant ages of 34.2 ± 0.6 Ma (Tongchang), 33.7 ± 0.8 Ma (Chang’anchong), 35.7 ± 0.5 Ma (Habo) and 34.6 ± 1.2 Ma (Chang’an). These porphyries are peraluminous with relatively high potassium contents (K₂O: 4.2–5.7 wt%), and show shoshonitic affinities. Bulk rock Fe₂O₃/FeO ratios vary from 0.51 to 0.97, typical of moderately oxidized to strongly oxidized magmas. Zircon Ce⁴⁺/Ce³⁺ values vary between 25.9 and 371.8 with a mean of 129.3. The log(ƒo₂) values vary from −20.7 to −9.6, and plot within the range of FMQ (fayalite-magnetite-quartz oxygen buffer) to MH (magnetite- hematite oxygen buffer), indicating an oxidizing parental magma. The mineralized porphyries from the Yulong and Beiya deposits, which were previous considered to have formed under the same tectonic conditions as those in the Tongchang district, have higher mean zircon Ce⁴⁺/Ce³⁺ values of 249.4 and 399.5, suggesting that the oxygen fugacities of the porphyries in the Tongchang district is relatively lower. This might imply that oxygen fugacity is an important factor that led to the differentiation of deposit size in the JRMB, and that larger porphyry deposits are associated with more oxidized magmas.     

Timing of skarn deposit formation of the Tonglushan ore district,southeastern Hubei Province,Middle–Lower Yangtze River Valley metallogenic belt and its implications

The Tonglushan ore district in the Middle–Lower Yangtze River Valley metallogenic belt includes the Tonglushan Cu–Fe, the Jiguanzui Au–Cu, and the Taohuazui Au–Cu skarn deposits. They are characterized by NE-striking ore bodies and hosted at the contact of Triassic carbonate rocks and Late Mesozoic granitoid deposits. New Sensitive High-Resolution Ion Microprobe (SHRIMP) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA–ICP-MS) zircon U–Pb, molybdenite Re–Os, and phlogopite ⁴⁰Ar–³⁹Ar ages indicate that these skarn deposits formed between 140.3 ± 1.1 and 137.3 ± 2.4 Ma. These dates are identical to the zircon U–Pb ages for host quartz diorites ranging from 140 ± 2 to 139 ± 1 Ma. These results confirm that both skarn mineralization and related intrusions were initiated during the Early Cretaceous. The high rhenium contents (261.4–1152 μg/g) of molybdenites indicate that a metasomatic mantle fluid was involved in the ore-forming process of these skarn ore systems. This conclusion is consistent with previously published constraints from sulfur, deuterium, and oxygen isotope compositions, and the geochemical signatures, and Sr–Nd isotopic data of the mineralization-hosting intrusions. Geological and geochronological evidence demonstrates that there were two igneous events in the Tonglushan ore district. The first resulted in the emplacement of quartz diorite during the Early Cretaceous (140 ± 2 to 139 ± 1 Ma), and the second is characterized by the eruption of volcanic rocks during the mid-Early Cretaceous (130 ± 2 to 124 ± 2 Ma). The former is spatially, temporally and genetically associated with skarn gold-bearing mineralization (140.3 ± 1.1 to 137.3 ± 2.4 Ma). The recognition of these two igneous events invalidates previous models that proposed continuous magmatism and associated mineral deposits in the Middle–Lower Yangtze River Valley metallogenic belt.     

Early Mesozoic tectono-magmatic activity and mineralization in Northeast China: evidence from Re–Os to U–Pb studies of the Taipingchuan porphyry Cu–Mo deposit in the Derbugan metallogenic belt

The Taipingchuan Cu–Mo deposit is a recently discovered large porphyry deposit located in the north of the Derbugan metallogenic belt of northeastern China. The geochronological data of the deposit yielded a Late Triassic zircon U–Pb age of 202 ± 6 Ma from a granodiorite porphyry that hosts the Cu–Mo mineralization. Measured Re–Os isotopes of seven disseminated molybdenite samples yielded an isochron age of 200 ± 5 Ma with mean square of weighted deviates of 2.7, while those of seven veinlet molybdenite samples also produced an isochron age of 200.1 ± 2.5 Ma and mean square of weighted deviates of 3.3. These isochron ages show that a Cu–Mo mineralization event occurred at ca. 200 Ma. Based on regional tectonic evolution, we propose that the Late Triassic Cu–Mo mineralization of the host porphyry in the Derbugan metallogenic belt was mainly associated with the subduction of the Mongol–Okhotsk Ocean slab under the Ergun block, contrary to previous suggestion that it was related to the subduction of the Mesozoic Palaeo-Pacific plate.     

Origin of the Tongshankou porphyry–skarn Cu–Mo deposit,eastern Yangtze craton,Eastern China: geochronological,geochemical, and Sr–Nd–Hf isotopic constraints

The Tongshankou Cu–Mo deposit, located in the westernmost Daye district of the Late Mesozoic Metallogenic Belt along the Middle-Lower reaches of the Yangtze River, eastern China, consists mainly of porphyry and skarn ores hosted in the Tongshankou granodiorite and along the contact with the Lower Triassic marine carbonates, respectively. Sensitive high-resolution ion microprobe zircon U–Pb dating constrains the crystallization of the granodiorite at 140.6 ± 2.4 Ma (1σ). Six molybdenite samples from the porphyry ores yield Re–Os isochron age of 143.8 ± 2.6 Ma (2σ), while a phlogopite sample from the skarn ores yields an ⁴⁰Ar/³⁹Ar plateau age of 143.0 ± 0.3 Ma and an isochron age of 143.8 ± 0.8 Ma (2σ), indicating an earliest Cretaceous mineralization event. The Tongshankou granodiorite has geochemical features resembling slab-derived adakites, such as high Sr (740–1,300 ppm) and enrichment in light rare earth elements (REE), low Sc (<10 ppm), Y (<13.3 ppm), and depletion in heavy REE (<1.2 ppm Yb), and resultant high Sr/Y (60–92) and La/Yb (26–75) ratios. However, they differ from typical subduction-related adakites by high K, low MgO and Mg#, and radiogenic Sr–Nd–Hf isotopic compositions, with (⁸⁷Sr/⁸⁶Sr) _t  = 0.7062–0.7067, ɛ _Nd(t) = −4.37 to −4.63, (¹⁷⁶Hf/¹⁷⁷Hf) _t  = 0.282469–0.282590, and ɛ _Hf(t) = −3.3 to −7.6. The geochemical and isotopic data, coupled with geological analysis, indicate that the Tongshankou granodiorite was most likely generated by partial melting of enriched lithospheric mantle that was previously metasomitized by slab melts related to an ancient subduction system. Magmas derived from such a source could have acquired a high oxidation state, as indicated by the assemblage of quartz–magnetite–titanite–amphibole–Mg-rich biotite in the Tongshankou granodiorite and the compositions of magmatic biotite that fall in the field between the NiNiO and magnetite–hematite buffers in the Fe³⁺–Fe²⁺–Mg diagram. Sulfur would have been present as sulfates in such highly oxidized magmas, so that chalcophile elements Cu and Mo were retained as incompatible elements in the melt, contributing to subsequent mineralization. A compilation of existing data reveals that porphyry and porphyry-related Cu–Fe–Au–Mo mineralization from Daye and other districts of the Metallogenic Belt along the Middle-Lower reaches of the Yangtze River took place coevally in the Early Cretaceous and was related to an intracontinental extensional environment, distinctly different from the arc-compressive setting of the Cenozoic age that has been responsible for the emplacement of most porphyry Cu deposits of the Pacific Rim.     

Geochronology and geochemistry of Late Cretaceous igneous intrusions and Mo–Cu–(W) mineralization in the southern Yidun Arc,SW China: Implications for metallogenesis and geodynamic setting

The Sanjiang Tethyan Metallogenic Domain (STMD) is an important part of the Tethyan giant metallogenic belt. The Yidun Arc is a part of the STMD in the eastern Tibetan Plateau. Recently, four newly discovered Mo–Cu–(W) ore deposits related to granitic intrusions were found distributed along the north-south strike in the southern Yidun Arc, which are identified as the Xiuwacu, Relin, Hongshan, and Tongchanggou deposits herein. These four deposits formed along high-angle north-northwest or north-west strike-slip faults, with vein-type and porphyry-type Mo–Cu mineralization developed in the intrusions. Molybdenite Re–Os and zircon U–Pb dating together with zircon Hf isotopes and whole-rock geochemistry of the intrusions were studied to discern the relationship between mineralization and magmatism, metallogenesis, and tectonic settings. Molybdenite from skarn-type mineralization at the Hongshan deposit has a Re–Os isochron age of 81.2 ± 2.6 Ma (MSWD = 1.3, n = 5) consistent with previously published zircon U–Pb ages and Re–Os ages of porphyry-type Mo mineralization. These results indicate that the Hongshan is a Late Cretaceous porphyry-skarn Cu–Mo deposit. Zircon U–Pb ages of the granitic intrusions in the Xiuwacu, Relin, and Tongchanggou deposits varying from ~ 87.4 Ma to ~ 82.7 Ma. Combined with published molybdenite Re–Os age spectrum (~ 85 Ma to ~ 81.2 Ma), it is proposed that the Mo–Cu–(W) mineralization in the Shangri-La region is spatially, temporally, and probably genetically related to the Late Cretaceous granitic intrusions. The Relin, Hongshan, and Tongchanggou intrusions have high SiO₂ (65.2–70.0 wt.%), Sr (363–905 ppm), Sr/Y (22–72), and La/Yb (37–69) ratios, and low Y (11.6–17.0 ppm) and Yb (0.97–1.59 ppm), which displayed adakitic affinities. Their low MgO (0.66–1.44 wt.%), Mg# (25–46), variable negative zircon ε_Hf(t) values (− 7.9 to − 2.3), and Proterozoic two-stages Hf model ages (T_DM2 = 1.13–1.62 Ga) suggest that they were probably dominantly derived from partial melting of thickened lower continental crust. According to the tectonic evolution of the Bangong Meso-Tethys Ocean during the Late Mesozoic, the Late Cretaceous igneous event and mineralization in the Yidun Arc likely formed under a late- or post-collision extensional environment, probably related to the collision between the Lhasa and Qiangtang terranes during the Late Cretaceous.     

Geochronology and geochemistry of late Jurassic adakitic intrusions and associated porphyry Mo–Cu deposit in the Tongcun area,east China: Implications for metallogenesis and tectonic setting

The genesis of adakites and associated Mo–Cu mineralization in non–arc settings in China is poorly constrained. Here, we present geochronology, geochemistry and Sr–Nd–Pb isotopes for the Tongcun intrusive complex, and report Pb isotopes and ⁴⁰Ar–³⁹Ar age for the Tongcun Mo–Cu deposit. The Tongcun intrusive complex is composed mainly by granodiorite and monzogranite (phase 1 and phase 2), with emplacement age of 160 Ma to 148 Ma. The Tongcun complex can be classified as typical high–K calc–alkaline I–type granitoid and also shows adakitic geochemical features. Moreover, the negative Nb, Ta, Ti, and P anomalies and enriched initial ⁸⁷Sr/⁸⁶Sr ratios of 0.7083–0.7092 of the Tongcun intrusive complex are consistent with those of the subduction–related magmatism. The ⁴⁰Ar–³⁹Ar dating of sericite, which is intergrown with chalcopyrite, indicates that the late Cu mineralization event occurred at ~ 155.5 Ma. The early Mo (Cu) and the late Cu mineralization events in this deposit were temporally, spatially and genetically associated with the emplacement of monzogranite (phase 1). There are no obvious linear correlation between SiO₂ and most of the major and trace elements, and all rock samples fall within the fields of unfractional crystallization felsic granites in Zr + Nb + Ce + Y versus FeO^T/MgO and (K₂O + Na₂O)/CaO diagrams, indicating that partial melting rather than fractional crystallization has played an important role for the formation of the Tongcun intrusive complex. Magmatic inherited zircons from the Tongcun granitoids with the age peaked at 780–812 Ma, imply that the Neoproterozoic igneous rocks in the lower crust have been incorporated into the magma source. The uniform ε_Nd(t) (− 6.3 to − 7.3), initial ⁸⁷Sr/⁸⁶Sr, ²⁰⁷Pb/²⁰⁴Pb (15.596–15.621), and ²⁰⁸Pb/²⁰⁴Pb (38.374–38.650), as well as high K₂O contents (3.36–4.10 wt.%) and relatively high Mg# values (35.40 to 40.30) suggest the Tongcun intrusive complex was derived from partial melting of the thickened lower continental crust triggered by basaltic magma underplating plus additional input from the EM II mantle-derived basaltic melts. The Tongcun area was controlled by a compression setting related to the subduction of the Paleo–Pacific Plate in Mesozoic period.     

Geochronologic and isotope geochemical constraints on magmatism and associated W–Mo mineralization of the Jitoushan W–Mo deposit,middle–lower Yangtze Valley

The Jitoushan W–Mo ore body is a typical skarn-type deposit with the potential for porphyry Mo mineralization at depth. As it is newly discovered, only a few studies have been conducted on the geochronology and ore genesis of this deposit. The ore district consists of Cambrian to Silurian sedimentary and low-grade metasedimentary strata, intruded by granodiorite, diorite porphyry, granite porphyry, and quartz porphyry. Skarn W–Mo ore bodies are hosted in the contact zone between the granodiorite and Cambrian limestone strata. Within the granodiorite near the contact zone, quartz vein type and disseminated sulphide mineralization are well developed. The Mo-bearing granite porphyry has been traced at depth by drilling. Our results reveal two discrete magmatic events at ca. 138 and ca. 127 Ma in the study area. The molybdenite Re–Os isochronal age of 136.6 ± 1.5 million years is consistent with the first magmatic event. The zircon Hf isotope (?_Hf(t) =??12.55?3.91), sulphide isotopes (δ³⁴S = 3.32–5.59‰), and Re content of molybdenite (Re_content = 6.424–19.07 μg) indicate that the ore-forming materials were mainly derived from the deep crust. The regional tectonic system switched from a Late Jurassic transpressive regime to an earliest Cretaceous extensional regime at ca. 145 Ma, and at ca. 138 Ma, the Jitoushan W–Mo deposit formed in an extensional setting.     

Skarn mineralogy and its geological significance for the Tayuan (Cu–Mo)–Pb–Zn deposit,northern Daxinganling metallogenic belt

The Tayuan (Cu–Mo)–Pb–Zn deposit is located in the northern part of Daxinganling, NE China. Lenticular ore body occurs in the skarn zone. The skarn minerals mainly include garnet, pyroxene, epidote and wollastonite. Electron microprobe analysis shows that the end member of garnet is mainly andradite (Ad_62–97Gr_11–45), the pyroxene is mainly diopside, and epidote is mainly clinozoisite. These characteristics indicate that the Tayuan polymetallic skarn deposit is mainly calcareous skarn. Sometimes the content zonation can be observed in garnets. With one garnet crystal, content is shifty from the core to the rim. In general, the iron content in the core is higher than in the edge. The content in the garnet shows that the garnet in the Tayuan deposit formed from weak oxidation in alkaline environment with the oxygen fugacity increasing, suggesting that the hydrothermal fluid evolved from an acidic to a slight alkaline state. In the Tayuan polymetallic deposit, the ratio of Mn/Fe in pyroxene is about 1.3, and of Mg/Fe, it is about 2. The components of garnet in the Tayuan deposit plot in the field of the typical skarn Zn, Cu, Mo deposits in the world.     

Relationships between porphyry Cu–Mo mineralization in the Jinshajiang–Red River metallogenic belt and tectonic activity: Constraints from zircon U–Pb and molybdenite Re–Os geochronology

The Jinshajiang–Red River porphyry Cu–Mo metallogenic belt is an important Cenozoic porphyry Cu–Mo mineralization concentrating zone in the eastern Indo‐Asian collision zone. New zircon U–Pb and molybdenite Re–Os ages and compilation of previously published ages indicate that porphyry Cu–Mo deposits in the belt did not form at the same time, i.e., the porphyry emplacement and relevant Cu–Mo mineralization ages of the Ailaoshan–Red River ore belt in south range from 36.3 Ma to 34.6 Ma, and from 36.0 Ma to 33.9 Ma, respectively, which are obviously younger than the porphyry emplacement ages of 43.8–36.9 Ma and the relevant Cu–Mo mineralization ages of 41.6–35.8 Ma of the Yulong ore belt in north. Tectonic studies indicated that the Jinshajiang fault system in north and Ailaoshan–Red River fault system in south of the Jinsjiang–Red river belt had different strike-slip patterns and ages. The right-lateral strike-slip motion of the Jinshajiang fault system initiated at ca. 43 Ma with corresponding formation of the Yulong porphyry Cu–Mo system, whereas the left-lateral strike-slip motion of the Ailaoshan–Red River fault system initiated at ca. 36 Ma with corresponding formation of the Ailaoshan–Red River porphyry Cu–Mo system. Therefore, the different ages of porphyry Cu–Mo systems, between in north and south of the Jinshajiang–Red River belt, indicate that the porphyry Cu–Mo mineralization is closely related to the divergent strike-slip movements between the Jinshajiang and Ailaoshan–Red River strike-slip faulting resulted from the Indo‐Asian collision. The tanslithospheric Jinshajiang–Red River faulting caused partial melting of the enriched mantle sources of alkali-rich porphyries by depressurization or/and asthenospheric heating, and facilitated the migration of alkali-rich magmas and the corresponding formation of alkali-rich porphyries and relevant Cu–Mo deposits in the belt.     

Geochemical study of Cretaceous magmatic rocks in Chuzhou region,low Yangtze River metallogenic belt: implications for petrogenesis and Cu–Au mineralization

ABSTRACT

The low Yangtze River metallogenic belt (LYRMB) is one of the most important poly-metal deposit belts in China. The Chuxian, Machang and Shangyaopu intrusions in the LYRMB are intermediate rock series, mainly composed of monzonite and quartz monzonite. In this study, bulk rock major and trace elements, zircon U–Pb dating and Hf isotope were analysed. Five ages have been obtained as (1) Chuxian, 121.8 ± 1.9 and 124.0 ± 1.4 Ma, respectively, (2) Machang intrusion, 123.1 ± 2.0 Ma and (3) Shangyaopu, 126.6 ± 1.8 and 123.4 ± 1.9 Ma, indicating that the regional igneous activity was in Early Cretaceous, being consistent with the massive Yanshanian magmatic events in eastern China. These three intrusions are identified as a high-Mg adakite, most of them showing geochemical features of high Si, high Na and low Sr, which can be interpreted as partial melting of subducted oceanic crust. High Mg# characteristics indicate the magmas reacted with the mantle. The negative zircon ε_Hf values of these adakites suggest that the magmas have assimilation of old crustal material, e.g. Archaean continental crust, the basement of the south Tancheng–Lujiang (Tan–Lu) fault. Biotite Ti temperature result (about 700°C) shows that intrusive magma has a relatively low temperature. Petrogenesis and regional Cu–Au mineralization mechanism may be explained by Pacific plate subduction during about 125–180 million years subducted to southwest towards the LYRMB. Magmas formed by partial melting of subducted oceanic crust have systemically high Cu–Au contents, which are conducive to corresponding mineralization.