Postglacial to Holocene landscape evolution and process rates in steep alpine catchments

Climate change and high magnitude mass wasting events pose adverse societal effects and hazards, especially in alpine regions. Quantification of such geomorphic processes and their rates is therefore critical but is often hampered by the lack of appropriate techniques and the various spatiotemporal scales involved in these studies. Here we exploit both in situ cosmogenic beryllium-10 (¹⁰Be) and carbon-14 (¹⁴C) nuclide concentrations for deducing exposure ages and tracing of sediment through small alpine debris flow catchments in central Switzerland. The sediment cascade and modern processes we track from the source areas, through debris flow torrents to their final export out into sink regions with cosmogenic nuclides over an unprecedented five-year time series with seasonal resolution. Data from a seismic survey and a 90 m core revealed a glacially overdeepened basin, filled with glacial and paraglacial sediments. Surface exposure dating of fan boulders and radiocarbon ages constrain the valley fill from the last deglaciation until the Holocene and show that most of the fan existed in early Holocene times already. Current fan processes are controlled by episodic debris flow activity, snow (firn) and rock avalanches. Field investigations, digital elevation models (DEMs) of difference and geomorphic analysis agree with sediment fingerprinting with cosmogenic nuclides, highlighting that the bulk of material exported today at the outlet of the subcatchments derives from the lower fans. Cosmogenic nuclide concentrations steadily decrease from headwater sources to distal fan channels due to the incorporation of material with lower nuclide concentrations. Further downstream the admixture of sediment from catchments with less frequent debris flow activity can dilute the cosmogenic nuclide signals from debris flow dominated catchments but may also reach thresholds where buffering is limited. Consequently, careful assessment of boundary conditions and driving forces is required when apparent denudation rates derived from cosmogenic nuclide analysis are upscaled to larger regions. © 2018 John Wiley & Sons, Ltd.     

Interpreting erosion rates from cosmogenic radionuclide concentrations measured in rapidly eroding terrain

A combination of numerical analysis and ¹⁰Be concentrations measured in sediment samples from the high‐relief Torrente catchment, southern Spain, allows us to investigate the sampling requirements for determining erosion rates using cosmogenic nuclides in high‐relief, landslide‐dominated terrain. We use simple modelling to quantify the effect of particle spalling and/or landsliding on erosion rates determined using a cosmogenic in‐situ produced isotope. Analytical results show that the cosmogenic nuclide concentration of a surface experiencing regular detachment of a grain or block may be considered to be in steady state, and ‘in‐situ’ erosion rates estimated, when an appropriate number of spatially independent samples are amalgamated. We present equations that enable calculation of the number of bedrock samples that must be amalgamated for the estimation of mean erosion rates on an outcrop experiencing regular detachment of a grain or chip of thickness L every T years. Our findings confirm that mean catchment erosion rates may be reliably estimated from ¹⁰Be concentrations in fluvial sediment in high‐relief rapidly eroding terrain. These catchment‐wide integrated erosion rates can be calculated where erosion is primarily accomplished through shallow (<3 m) spalling processes; where deep‐seated (>3 m) landslides are the dominant mode of erosion only minimum erosion rates can be determined. Lastly, we present erosion rate measurements from the Torrente catchment that reveal variation of two orders of magnitude (0·03–1·6 m ka^?1) quantifying the high degree of spatial variation in erosion rates expected within rapidly uplifting catchments. Copyright © 2006 John Wiley & Sons, Ltd.     

The impact of storm-triggered landslides on sediment dynamics and catchment-wide denudation rates in the southern Central Range of Taiwan following the extreme rainfall event of Typhoon Morakot

Extreme erosion events can produce large short-term sediment fluxes. Such events complicate erosion rates estimated from cosmogenic nuclide concentrations in river sediment by providing sediment with a concentration different from the long-term basin average. We present a detrital ¹⁰Be study in southern Taiwan, with multiple samples obtained in a time sequence bracketing the 2009 Typhoon Morakot, to assess the impact of landslide sediment on ¹⁰Be concentrations (N¹⁰Be) in river sediment. Sediment samples were collected from 13 major basins, two or three times over the last decade, to observe the temporal variation of N¹⁰Be. Landslide inventories with time intervals of 5–6 years were used to quantify sediment flux changes. A negative correlation between N¹⁰Be and landslide areal density indicates dilution of N¹⁰Be by landslide sediment. Denudation rates estimated from the diluted N¹⁰Be can be up to three times higher than the lowest rate derived from the same basins. Observed increases imply that, 3 years after the passage of Typhoon Morakot, fluvial channels still contain a considerable amount of sediment provided by hillslope landslides during the event. However, higher N¹⁰Be in 2016 samples indicate that the contribution from landslide sediment at the sampled grain size has decreased with time. The correlation between changes in N¹⁰Be and landslide area and volume is not strong, likely resulting from the stochastic and complex nature of sediment transport. To simultaneously evaluate the volume of landslide-derived sediment and estimate the background denudation rate, associated with less impulsive sediment supply, we constructed a sediment-mixing model with the time series of N¹⁰Be and landslide inventories. The spatial pattern of background erosion rate in southern Taiwan is consistent with the regional tectonic framework, indicating that the landscape is evolving mainly in response to the tectonic forcing, and this signal is modified, but not obscured by impulsive sediment supply. © 2019 John Wiley & Sons, Ltd.     

Grain size-dependent 10Be concentrations in alluvial stream sediment of the Huasco Valley,a semi-arid Andes region

Terrestrial cosmogenic nuclide concentrations in sediment are used to quantify mean denudation rates in catchments. This article explores the differences between the ¹⁰Be concentration in fine (sand) and in coarse (1–3 or 5–10 cm pebbles) river sediment. Sand and pebbles were sampled at four locations in the Huasco Valley, in the arid Chilean Andes. Sand has ¹⁰Be concentrations between 4.8 and 8.3·10⁵ at g⁻¹, while pebbles have smaller concentrations between 2.2 and 3.3·10⁵ at g⁻¹. It appears that the different concentrations, systematically measured between sand and pebbles, are the result of different denudation rates, linked with the geomorphologic processes that originated them. We propose that the ¹⁰Be concentrations in sand are determined by the mean denudation rate of all of the geomorphologic processes taking place in the catchment, including debris flow processes as well as slower processes such as hill slope diffusion. In contrast, the concentrations in pebbles are probably related to debris flows occurring in steep slopes. The mean denudation rates calculated in the catchment are between 30 and 50 m/Myr, while the denudation rates associated with debris flow are between 59 and 81 m/Myr. These denudation rates are consistent with those calculated using different methods, such as measuring eroded volumes.     

Detection of transience in eroding landscapes

Past variations in climate and tectonics have led to spatially and temporally varying erosion rates across many landscapes. In this contribution I examine methods for detecting and quantifying the nature and timing of transience in eroding landscapes. At a single location, cosmogenic nuclides can detect the instantaneous removal of material or acceleration of erosion rates over millennial timescales using paired nuclides. Detection is possible only if one of the nuclides has a significantly shorter half‐life than the other. Currently, the only practical way of doing this is to use cosmogenic in situ carbon‐14 (¹⁴C) alongside a longer lived nuclide, such as beryllium‐10 (¹⁰Be). Hillslope information can complement or be used in lieu of cosmogenic information: in soil mantled landscapes, increased erosion rates can be detected for millennia after the increase by comparing relief and ridgetop curvature. This technique will work as long as the final erosion rate is greater than twice the initial rate. On a landscape scale, transience may be detected based upon disequilibria in channel profiles or ridgetops, but transience can be sensitive to the nature of transient forcing. Where forcing is periodic, landscapes display differing behavior if forcing is driven by changes in base level lowering rates versus changes in the efficiency of either channel or hillslope erosion (e.g. driven by climate change). Oscillations in base level lowering lead to basin averaged erosion rates that reflect a long term average erosion rate despite strong spatial heterogeneity in local erosion rates. This averaging is reflected in ¹⁰Be concentrations in stream sediments. Changes in hillslope sediment transport coefficients can lead to large fluctuations in basin averaged erosion rates, which again are reflected in ¹⁰Be concentrations. The variability of erosion rates in landscapes where both the sediment transport and channel erodibility coefficients vary is dominated by changes to the hillslope transport coefficient. Copyright © 2016 John Wiley & Sons, Ltd.     

Complex multiple cosmogenic nuclide concentration and histories in the arid Rio Lluta catchment,northern Chile

Terrestrial cosmogenic nuclide (TCN) concentrations measured in river sediments can be used to estimate catchment‐wide denudation rates. By investigating multiple TCN the steadiness of sediment generation, transport and depositional processes can be tested. Measurements of ¹⁰Be, ²¹Ne and ²⁶Al from the hyper‐ to semi‐arid Rio Lluta catchment, northern Chile, yield average single denudation rates ranging from 12 to 75 m Myr^–1 throughout the catchment. Paired nuclide analysis reveals complex exposure histories for most of the samples and thus the single nuclide estimates do not exclusively represent catchment‐wide denudation rates. The lower range of single nuclide denudation rates (12–17 m Myr^–1), established with the noble gas ²¹Ne, is in accordance with palaeodenudation rates derived from ²¹Ne/¹⁰Be and ²⁶Al/¹⁰Be ratio analysis. Since this denudation rate range is measured throughout the system, it is suggested that a headwater signal is transported downstream but modulated by a complex admixture of sediment that has been stored and buried at proximal hillslope or terrace deposits, which are released during high discharge events. That is best evidenced by the stable nuclide ²¹Ne, which preserves the nuclide concentration even during storage intervals. The catchment‐wide single ²¹Ne denudation rates and the palaeodenuation rates contrast with previous TCN‐derived erosion rates from bedrock exposures at hillslope interfluves by being at least one order of magnitude higher, especially in the lower river course. These results support earlier studies that identified a coupling of erosional processes in the Western Cordillera contrasting with decoupled processes in the Western Escarpment and in the Coastal Cordillera. Copyright © 2008 John Wiley & Sons, Ltd.     

Degradation of glacial deposits quantified with cosmogenic nuclides,Quartermain Mountains,Antarctica

Many glacial deposits in the Quartermain Mountains, Antarctica present two apparent contradictions regarding the degradation of unconsolidated deposits. The glacial deposits are up to millions of years old, yet they have maintained their meter‐scale morphology despite the fact that bedrock and regolith erosion rates in the Quartermain Mountains have been measured at 0·1–4·0 m Ma^?1. Additionally, ground ice persists in some Miocene‐aged soils in the Quartermain Mountains even though modeled and measured sublimation rates of ice in Antarctic soils suggest that without any recharge mechanisms ground ice should sublimate in the upper few meters of soil on the order of 10³ to 10⁵ years. This paper presents results from using the concentration of cosmogenic nuclides beryllium‐10 (¹⁰Be) and aluminum‐26 (²⁶Al) in bulk sediment samples from depth profiles of three glacial deposits in the Quartermain Mountains. The measured nuclide concentrations are lower than expected for the known ages of the deposits, erosion alone does not always explain these concentrations, and deflation of the tills by the sublimation of ice coupled with erosion of the overlying till can explain some of the nuclide concentration profiles. The degradation rates that best match the data range 0·7–12 m Ma^?1 for sublimation of ice with initial debris concentrations ranging 12–45% and erosion of the overlying till at rates of 0·4–1·2 m Ma^?1. Overturning of the tills by cryoturbation, vertical mixing, or soil creep is not indicated by the cosmogenic nuclide profiles, and degradation appears to be limited to within a few centimeters of the surface. Erosion of these tills without vertical mixing may partially explain how some glacial deposits in the Quartermain Mountains maintain their morphology and contain ground ice close to the surface for millions of years. Copyright © 2010 John Wiley & Sons, Ltd.     

Quantifying soil loss with in-situ cosmogenic 10Be and 14C depth-profiles

Conventional methods for the determination of past soil erosion provide only average rates of erosion of the sediment's source areas and are unable to determine the rate of at-a-site soil loss. In this study, we report in-situ produced cosmogenic ¹⁰Be, and ¹⁴C measurements from erratic boulders and two depth-profiles from Younger Dryas moraines in Scotland, and assess the extent to which these data allow the quantification of the amount and timing of site-specific Holocene soil erosion at these sites. The study focuses on two sites located on end moraines of the Loch Lomond Readvance (LLR): Wester Cameron and Inchie Farm, both near Glasgow. The site near Wester Cameron does not show any visible signs of soil disturbance and was selected in order to test (i) whether a cosmogenic nuclide depth profile in a sediment body of Holocene age can be reconstructed, and (ii) whether in situ ¹⁰Be and ¹⁴C yield concordant results. Field evidence suggests that the site at Inchie Farm has undergone soil erosion and this site was selected to explore whether the technique can be applied to determine the broad timing of soil loss. The results of the cosmogenic ¹⁰Be and ¹⁴C analyses at Wester Cameron confirm that the cosmogenic nuclide depth-profile to be expected from a sediment body of Holocene age can be reconstructed. Moreover, the agreement between the total cosmogenic ¹⁰Be inventories in the erratics and the Wester Cameron soil/till samples indicate that there has been no erosion at the sample site since the deposition of the till/moraine. Further, the Wester Cameron depth profiles show minimal signs of homogenisation, as a result of bioturbation, and minimal cosmogenic nuclide inheritance from previous exposure periods. The results of the cosmogenic ¹⁰Be and ¹⁴C analyses at Inchie Farm show a clear departure from the zero-erosion cosmogenic nuclide depth profiles, suggesting that the soil/till at this site has undergone erosion since its stabilisation. The LLR moraine at the Inchie Farm site is characterised by the presence of a sharp break in slope, suggesting that the missing soil material was removed instantaneously by an erosion event rather than slowly by continuous erosion. The results of numerical simulations carried out to constrain the magnitude and timing of this erosion event suggest that the event was relatively recent and relatively shallow, resulting in the removal of circa 20–50 cm of soil at a maximum of ∼2000 years BP. Our analyses also show that the predicted magnitude and timing of the Inchie Farm erosion event are highly sensitive to the assumptions that are made about the background rate of continuous soil erosion at the site, the stabilisation age of the till, and the density of the sedimentary deposit. All three parameters can be independently determined a priori and so do not impede future applications to other localities. The results of the sensitivity analyses further show that the predicted erosion event magnitude and timing is very sensitive to the ¹⁴C production rate used and to assumptions about the contribution of muons to the total production rate of this nuclide. Thus, advances in this regard need to be made for the method presented in this study to be applicable with confidence to scenarios similar to the one presented here.     

Rates of rockwall slope erosion in the upper Bhagirathi catchment,Garhwal Himalaya

Rockwall slope erosion is defined for the upper Bhagirathi catchment using cosmogenic Beryllium-10 (¹⁰Be) concentrations in sediment from medial moraines on Gangotri glacier. Beryllium-10 concentrations range from 1.1 ± 0.2 to 2.7 ± 0.3 × 10⁴ at/g SiO₂, yielding rockwall slope erosion rates from 2.4 ± 0.4 to 6.9 ± 1.9 mm/a. Slope erosion rates are likely to have varied over space and time and responded to shifts in climate, geomorphic and/or tectonic regime throughout the late Quaternary. Geomorphic and sedimentological analyses confirm that the moraines are predominately composed of rockfall and avalanche debris mobilized from steep relief rockwall slopes via periglacial weathering processes. The glacial rockwall slope erosion affects sediment flux and storage of snow and ice at the catchment head on diurnal to millennial timescales, and more broadly influences catchment configuration and relief, glacier dynamics and microclimates. The slope erosion rates exceed the averaged catchment-wide and exhumation rates of Bhagirathi and the Garhwal region on geomorphic timescales (10³−10⁵ years), supporting the view that erosion at the headwaters can outpace the wider catchment. The ¹⁰Be concentrations of medial moraine sediment for the upper Bhagirathi catchment and the catchments of Chhota Shigri in Lahul, northern India and Baltoro glacier in Central Karakoram, Pakistan show a tentative relationship between ¹⁰Be concentration and precipitation. As such there is more rapid glacial rockwall slope erosion in the monsoon-influenced Lesser and Greater Himalaya compared to the semi-arid interior of the orogen. Rockwall slope erosion in the three study areas, and more broadly across the northwest Himalaya is likely governed by individual catchment dynamics that vary across space and time. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons, Ltd.     

26Al/10Be ratios reveal the source of river sediments in the Kimberley,NW Australia

We use cosmogenic ¹⁰Be and ²⁶Al in both bedrock and fluvial sediments to investigate controls on erosion rates and sediment supply to river basins at the regional scale in the Kimberley, NW Australia. The area is characterised by lithologically controlled morphologies such as cuestas, isolated mesas and extensive plateaus made of slightly dipping, extensively jointed sandstones. All sampled bedrock surfaces at plateau tops, ridgelines, and in the broader floodplain of major rivers over the region show similar slow lowering rates between 0.17 and 4.88 m.Myr^-1, with a mean value of 1.0 ± 0.6 m.Myr^-1 (n=15), whilst two bedrock samples collected directly within river-beds record rates that are one to two orders of magnitude higher (14.4 ± 1.5 and 20.9 ± 2.5 m.Myr^-1, respectively). Bedrock ²⁶Al/¹⁰Be ratios are all compatible with simple, continuous sub-aerial exposure histories. Modern river sediment yield lower ¹⁰Be and ²⁶Al concentrations, apparent ¹⁰Be basin-wide denudation rates ranging between 1.8 and 7.7 m.Myr^-1, with a median value of 2.6 m.Myr^-1, more than double the magnitude of bedrock erosion rates. ²⁶Al/¹⁰Be ratios of the sediment samples are lower than those obtained for bedrock samples. We propose that these depleted ²⁶Al/¹⁰Be ratios can largely be explained by the supply of sediment to river basins from the slab fragmentation and chemical weathering of channel gorge walls and plateau escarpments that result in diluting the cosmogenic nuclide concentration in river sediments measured at the basin outlets. The results of a mass-balance model suggest that ~60–90% of river sediment in the Kimberley results from the breakdown and chemical weathering of retreating vertical sandstone rock-walls in contrast to sediment generated by bedrock weathering and erosion on the plateau tops. This study emphasises the value of analysing two or more isotopes in basin-scale studies using cosmogenic nuclides, especially in slowly eroding post-orogenic settings. © 2019 John Wiley & Sons, Ltd.     

Very slow erosion rates and landscape preservation across the southwestern slope of the Ladakh Range,India

Erosion rates are key to quantifying the timescales over which different topographic and geomorphic domains develop in mountain landscapes. Geomorphic and terrestrial cosmogenic nuclide (TCN) methods were used to determine erosion rates of the arid, tectonically quiescent Ladakh Range, northern India. Five different geomorphic domains are identified and erosion rates are determined for three of the domains using TCN ¹⁰Be concentrations. Along the range divide between 5600 and 5700 m above sea level (asl), bedrock tors in the periglacial domain are eroding at 5.0 ± 0.5 to 13.1 ± 1.2 meters per million years (m/m.y.)., principally by frost shattering. At lower elevation in the unglaciated domain, erosion rates for tributary catchments vary between 0.8 ± 0.1 and 2.0 ± 0.3 m/m.y. Bedrock along interfluvial ridge crests between 3900 and 5100 m asl that separate these tributary catchments yield erosion rates <0.7 ± 0.1 m/m.y. and the dominant form of bedrock erosion is chemical weathering and grusification. Erosion rates are fastest where glaciers conditioned hillslopes above 5100 m asl by over‐steepening slopes and glacial debris is being evacuated by the fluvial network. For range divide tors, the long‐term duration of the erosion rate is considered to be 40–120 ky. By evaluating measured ¹⁰Be concentrations in tors along a model ¹⁰Be production curve, an average of ~24 cm is lost instantaneously every ~40 ky. Small (<4 km²) unglaciated tributary catchments and their interfluve bedrock have received very little precipitation since ~300 ka and the long‐term duration of their erosion rates is 300–750 ky and >850 ky, respectively. These results highlight the persistence of very slow erosion in different geomorphic domains across the southwestern slope of the Ladakh Range, which on the scale of the orogen records spatial changes in the locus of deformation and the development of an orogenic rain shadow north of the Greater Himalaya. Copyright © 2014 John Wiley & Sons, Ltd.     

Transient sediment supply in a high‐altitude Alpine environment evidenced through a 10Be budget of the Etages catchment (French Western Alps)

Although beryllium‐10 (¹⁰Be) concentrations in stream sediments provide useful synoptic views of catchment‐wide erosion rates, little is known on the relative contributions of different sediment supply mechanisms to the acquisition of their initial signature in the headwaters. Here we address this issue by conducting a ¹⁰Be‐budget of detrital materials that characterize the morphogenetic domains representative of high‐altitude environments of the European Alps. We focus on the Etages catchment, located in the Ecrins‐Pelvoux massif (southeast France), and illustrate how in situ ¹⁰Be concentrations can be used for tracing the origin of the sand fraction from the bedload in the trunk stream. The landscape of the Etages catchment is characterized by a geomorphic transient state, high topographic gradients, and a large variety of modern geomorphic domains ranging from glacial environments to scarcely vegetated alluvial plains. Beryllium‐10 concentrations measured in the Etages catchment vary from ~1 × 10⁴ to 4.5 × 10⁵ atoms per gram quartz, while displaying consistent ¹⁰Be signatures within each representative morphogenetic unit. We show that the basic requirements for inferring catchment‐wide denudation from ¹⁰Be concentration measurements are not satisfied in this small, dynamic catchment. However, the distinct ¹⁰Be signature observed for the geomorphic domains can be used as a tracer. We suggest that a terrestrial cosmogenic nuclide (TCN) budget approach provides a valuable tool for the tracing of material origin in basins where the ‘let nature do the averaging’ principles may be violated. Copyright © 2013 John Wiley & Sons, Ltd.     

Paired 10Be sampling of polished bedrock and erratic boulders to improve dating of glacial landforms: an example from the Western Alps

Cosmogenic nuclide dating of glacial landforms may lead to ambiguous results for ice retreat histories. The persistence of significant cosmogenic concentrations inherited from previous exposure may increase the apparent exposure ages for polished bedrocks affected by limited erosion under ice and for erratic boulders transported by glaciers and previously exposed in high-altitude rock walls. In contrast, transient burying by moraines, sediments and snow decreases the apparent exposure age. We propose a new sampling strategy, applied to four sites distributed in the Arc and Arve valleys in the Western Alps, to better constrain the factors that can bias exposure ages associated with glacial processes. We used the terrestrial cosmogenic nuclide ¹⁰Be (TCN) to estimate the exposure time from paired sampling of depth profiles in polished bedrock and on overlying erratic boulders. For a given sampling site, the exposure ages for both the polished bedrock and boulder are expected to be the same. However, in six cases out of seven, boulders had significantly higher ¹⁰Be surface concentrations than those of the associated polished surfaces. In present and past glacial processes, the ¹⁰Be distribution with depth for boulders and bedrocks implies the presence of an inheritance concentration of ¹⁰Be. Our study suggests that ¹⁰Be concentrations in erratic boulders and in polished bedrocks provide maximum and minimum exposure ages of the glacial retreat, respectively. © 2019 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Combining surface exposure dating and burial dating from paired cosmogenic depth profiles. Example of El Límite alluvial fan in Huércal-Overa basin (SE Iberia)

Cosmogenic nuclide depth-profiles are used to calculate the age of landforms, the rates at which erosion has affected them since their formation and, in case of deposits, the paleo-erosion rate in the source area. However, two difficulties are typically encountered: 1) old deposits or strongly affected by cosmogenic nuclide inheritance often appear to be saturated, and 2) a full propagation of uncertainties often yields poorly constrained ages. Here we show how to combine surface-exposure-dating and burial-dating techniques in the same profile to get more accurate age results and to constrain the extent of pre-depositional burial periods. A ¹⁰Be–²⁶Al depth-profile measured in an alluvial fan of SE Iberia is presented as a natural example.     

Discordance between cosmogenic nuclide concentrations in amalgamated sands and individual fluvial pebbles in an arid zone catchment

Based on cosmogenic ¹⁰Be and ²⁶Al analyses in 15 individual detrital quartz pebbles (16–21 mm) and cosmogenic ¹⁰Be in amalgamated medium sand (0.25–0.50 mm), all collected from the outlet of the upper Gaub River catchment in Namibia, quartz pebbles yield a substantially lower average denudation rate than those yielded by the amalgamated sand sample. ¹⁰Be and ²⁶Al concentrations in the 15 individual pebbles span nearly two orders of magnitude (0.22 ± 0.01 to 20.74 ± 0.52 × 10^{6 10}Be atoms g⁻¹ and 1.35 ± 0.09 to 72.76 ± 2.04 × 10^{6 26}Al atoms g⁻¹, respectively) and yield average denudation rates of ∼0.7 m Myr⁻¹ (¹⁰Be) and ∼0.9 m Myr⁻¹ (²⁶Al). In contrast, the amalgamated sand yields an average ¹⁰Be concentration of 0.77 ± 0.03 × 10⁶ atoms g⁻¹, and an associated mean denudation rate of 9.6 ± 1.1 m Myr⁻¹, an order of magnitude greater than the rates obtained for the amalgamated pebbles. The inconsistency between the ¹⁰Be and ²⁶Al in the pebbles and the ¹⁰Be in the amalgamated sand is likely due to the combined effect of differential sediment sourcing and longer sediment transport times for the pebbles compared to the sand-sized grains. The amalgamated sands leaving the catchment are an aggregate of grains originating from all quartz-bearing rocks in all parts of the catchment. Thus, the cosmogenic nuclide inventories of these sands record the overall average lowering rate of the landscape. The pebbles originate from quartz vein outcrops throughout the catchment, and the episodic erosion of the latter means that the pebbles will have higher nuclide inventories than the surrounding bedrock and soil, and therefore also higher than the amalgamated sand grains. The order-of-magnitude grain size bias observed in the Gaub has important implications for using cosmogenic nuclide abundances in depositional surfaces because in arid environments, akin to our study catchment, pebble-sized clasts yield substantially underestimated palaeo-denudation rates. Our results highlight the importance of carefully considering geomorphology and grain size when interpreting cosmogenic nuclide data in depositional surfaces.     

Constant denudation rates in a high alpine catchment for the last 6 kyrs

Terrestrial cosmogenic nuclides (TCN) have widely been used as proxies in determining denudation rates in catchments. Most studies were limited to samples from modern active streams, thus little is known about the magnitude and causes of TCN variability on millennial time scales. In this work we present a 6 kyrs long, high resolution record of ¹⁰Be concentrations (n = 18), which were measured in sediment cores from an alluvial fan delta at the outlet of the Fedoz Valley in the Swiss Alps. This record is paired with a 3‐year time series (n = 4) of ¹⁰Be measured in sediment from the active stream currently feeding this fan delta. The temporal trend in the ¹⁰Be concentrations after correction for postdepositional production of ¹⁰Be was found to be overall constant and in good agreement with the modern river ¹⁰Be concentration. The calculated mean catchment‐wide denudation rate amounts to 0.73 ± 0.18 mm yr^?1. This fairly constant level of ¹⁰Be concentrations can be caused by a constant denudation rate over time within the catchment or alternatively by a buffered signal. In this contribution we suggest that the large alluvial floodplain in the Fedoz Valley may act as an efficient buffer on Holocene time scales in which sediments with different ¹⁰Be signatures are mixed. Therefore, presumable variations in the ¹⁰Be signals derived from changes in denudation under a fluctuating Holocene climate are only poorly transferred to the catchment outlet and not recorded in the ¹⁰Be record. However, despite the absence of high frequency signals, we propose that the buffered and averaged ¹⁰Be signal could be meaningfully and faithfully interpreted in terms of long‐term catchment‐averaged denudation rate. Our study suggests that alluvial buffers play an important role in regulating the ¹⁰Be signal exported by some alpine settings that needs to be taken into account and further investigated. Copyright © 2016 John Wiley & Sons, Ltd.     

P–PINI: A cosmogenic nuclide burial dating method for landscapes undergoing non-steady erosion

Existing methods of cosmogenic nuclide burial dating perform well provided that sediment sources undergo steady rates of erosion and the samples experience continuous exposure to cosmic rays. These premises exert important limitations on the applicability of the methods. And yet, high mountain sediment sources are rife with transient processes, such as non-steady erosion by glacial quarrying and/or landsliding, or temporary cosmic-ray shielding beneath glaciers and/or sediment. As well as breaching the premises of existing burial dating methods, such processes yield samples with low nuclide abundances and variable ²⁶Al/¹⁰Be ratios that may foil both isochron and simple burial-age solutions. P–PINI (Particle-Pathway Inversion of Nuclide Inventories) is a new dating tool designed for dating the burial of sediments sourced from landscapes characterized by abrupt, non-steady erosion, discontinuous exposure, and catchments with elevation-dependent ²⁶Al/¹⁰Be production ratios. P–PINI merges a Monte Carlo simulator with established cosmogenic nuclide production equations to simulate millions of samples (¹⁰Be–²⁶Al inventories). The simulated samples are compared statistically with ¹⁰Be–²⁶Al measured in field samples to define the most probable burial age. Here, we target three published ¹⁰Be–²⁶Al datasets to demonstrate the versatility of the P–PINI model for dating fluvial and glacial sediments. (1) The first case serves as a robust validation of P–PINI. For the Pulu fluvial gravels (China), we obtain a burial age of 1.27 ± 0.10 Ma (1σ), which accords with the isochron burial age and two independent chronometers reported in Zhao et al. (2016) Quaternary Geochronology 34, 75–80. The second and third cases, however, reveal marked divergence between P–PINI and isochron-derived ages. (2) For the fluvial Nenana Gravel (USA), we obtain a minimum-limiting burial age of 4.5 ± 0.7 Ma (1σ), which is compatible with unroofing of the Alaska Range starting ∼ 6 Ma, while calling into question the Early Pleistocene isochron burial age presented in Sortor et al. (2021) Geology 49, 1473–1477. (3) For the Bünten Till (Switzerland), we obtain a limiting burial age of <204 ka (95th percentile range), which conforms with the classical notion of the most extensive glaciation in the northern Alpine Foreland assigned to the Riss glaciation (sensu marine isotope stage 6) contrary to the isochron burial age presented in Dieleman et al. (2022) Geosciences, 12, 39. Discrepancies between P–PINI and the isochron ages are rooted in the challenges posed by the diverse pre-burial ²⁶Al/¹⁰Be ratios produced under conditions characteristic of high mountain landscapes; i.e., non-steady erosion, discontinuous cosmic-ray exposure, and elevation-dependent ²⁶Al/¹⁰Be production ratios in the source region, which are incompatible with the isochron method, but easily accommodated by the stochastic design of P–PINI.     

Cosmogenic 21Ne analysis of individual detrital grains: Opportunities and limitations

We use a numerical model describing cosmogenic nuclide acquisition in sediment moving through the upper Gaub River catchment to evaluate the extent to which aspects of source area geomorphology and geomorphological processes can be inferred from frequency distributions of cosmogenic ²¹Ne (²¹Ne_c) concentrations in individual detrital grains. The numerical model predicts the pathways of sediment grains from their source to the outlet of the catchment and calculates the total ²¹Ne_c concentration that each grain acquires along its pathway. The model fully accounts for variations in nuclide production due to changes in latitude, altitude and topographic shielding and allows for spatially variable erosion and sediment transport rates. Model results show that the form of the frequency distribution of ²¹Ne_c concentrations in exported sediment is sensitive to the range and spatial distribution of processes operating in the sediment's source areas and that this distribution can be used to infer the range and spatial distribution of erosion rates that characterise the catchment. The results also show that lithology can affect the form of the ²¹Ne_c concentration distribution indirectly by exerting control on the spatial pattern of denudation in a catchment. Model results further indicate that the form of the distribution of ²¹Ne_c concentrations in the exported sediment can also be affected by the acquisition of ²¹Ne_c after detachment from bedrock, in the diffusive (hillslope) and/or advective (fluvial) domains. However, for such post‐detachment nuclide acquisition to be important, this effect needs to at least equal the nuclide acquisition prior to detachment from bedrock. Copyright © 2009 John Wiley and Sons, Ltd.     

The use of ablation‐dominated medial moraines as samplers for 10Be‐derived erosion rates of glacier valley walls,Kichatna Mountains,AK

We use cosmogenic ¹⁰Be concentrations in amalgamated rock samples from active, ice‐cored medial moraines to constrain glacial valley sidewall backwearing rates in the Kichatna Mountains, Alaska Range, Alaska. This dramatic landscape is carved into a small ～65 Ma granitic pluton about 100 km west of Denali, where kilometer‐tall rock walls and ‘cathedral’ spires tower over a radial array of over a dozen valley glaciers. These supraglacial landforms erode primarily by rockfall, but erosion rates are difficult to determine. We use cosmogenic ¹⁰Be to measure rockwall backwearing rates on timescales of 10³–10⁴ years, with a straightforward sampling strategy that exploits ablation‐dominated medial moraines. A medial moraine and its associated englacial debris serve as a conveyor system, bringing supraglacial rockfall debris from accumulation‐zone valley walls to the moraine crest in the ablation zone. We discuss quantitatively several factors that complicate interpretation of cosmogenic concentrations in this material, including the complex scaling of production rates in very steep terrain, the stochastic nature of the rockfall erosion process, the unmixed nature of the moraine sediment, and additional cosmogenic accumulation during transport of the sediment. We sampled medial moraines on each of three glaciers of different sizes and topographic aspects. All three moraines are sourced in areas with identical rock and similar sidewall relief of ～1 km. Each sample was amalgamated from 25 to 35 clasts collected over a 1‐km longitudinal transect of each moraine. Two of the glaciers yield similar ¹⁰Be concentrations (～1·6–2·2 × 10⁴ at/g) and minimum sidewall slope‐normal erosion rates (～0·5–0·7 mm/yr). The lowest ¹⁰Be concentrations (8 × 10³ at/g) and the highest erosion rates (1·3 mm/yr) come from the largest glacier in the range with the lowest late‐summer snowline. These rates are reasonable in an alpine glacial setting, and are much faster than long‐term exhumation rates of the western Alaska Range as determined by thermochronometric studies. Copyright © 2010 John Wiley & Sons, Ltd.     

Tracking denudation and sediment production and transport with cosmogenic 10Be in arid,high-altitude Himalayan half-grabens,Zanskar, northern India

Understanding the extent to which local factors, including bedrock and structure, govern catchment denudation in mountainous environments as opposed to broader climate or tectonic patterns provides insight into how landscapes evolve as sediment is generated and transported through them, and whether they have approached steady-state equilibrium. We measured beryllium-10 (¹⁰Be) concentrations in 21 sediment samples from glaciated footwall and hanging wall catchments, including a set of nested catchments, and 12 bedrock samples in the Puga and Tso Morari half-grabens located in the high-elevation, arid Zanskar region of northern India. In the Puga half-graben where catchments are underlain by quartzo-feldspathic gneissic bedrock, bedrock along catchment divides is eroding very slowly, about 5 m/Ma, due to extreme aridity and ¹⁰Be concentrations in catchment sediments are the highest (~60–90 × 10⁵ atoms/g SiO₂) as colluvium accumulates on hillslopes, decoupled from their ephemeral streams. At Puga, ¹⁰Be concentrations and the average erosion rates of a set of six nested catchments demonstrate that catchment denudation is transport-limited as sediment stagnates on lower slopes before reaching the catchment outlet. In the Tso Morari half-graben, gneissic bedrock is also eroding very slowly but ¹⁰Be concentrations in sediments in catchments underlain by low grade meta-sedimentary rocks, are significantly lower (~10–35 × 10⁵ atoms/g SiO₂). In these arid, high-elevation environments, ¹⁰Be concentrations in catchment sediments have more to do with bedrock weathering and transport times than steady-state denudation rates. © 2020 John Wiley & Sons, Ltd.