首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 468 毫秒
1.
The differentiated Mesozoic alkali dolerite Prospect Intrusion contains a wide range of secondary minerals, including carbonates (primarily calcite), laumontite, prehnite and heulandite, whose stability relationships imply a formation temperature of <200°C. The δ18O data for carbonates define a higher temperature (160 – 195°C) suite, and a lower temperature (51 – 73°C) suite. The δ13C, δ18O and 87Sr/86Sr isotope systematics for these carbonates suggest derivation of the higher temperature group from magmatic fluids, whereas the other group had a major meteoric component that probably originated from porewater in the country rock. Source fluids for prehnite were meteoric rather than magmatic in origin based on their δD and δ18O ratios. Early in the intrusion's emplacement, CO2-rich hydrothermal fluids formed a carbonate rind sealing the upper part of the hydrothermal system and produced the higher temperature carbonates (calcite) and laumontite. Later, cooler fluids with a meteoric component infiltrated vesicles and fractures, depositing the lower temperature carbonates (calcite, aragonite), heulandite and prehnite.  相似文献   

2.
To estimate the behavior of Au, Pd, REE, and Y in magmatic and postmagmatic processes, a series of experimental studies on the solubility of noble metals and REE in magma, magmatic fluid, and hydrothermal solutions has been performed in wide temperature and pressure ranges (300–400°C, 860–1350°C; 1–14 kbar). The coefficients of Au and Pd partitioning (D F/L) between fluid and tholeiitic melt have been determined. Depending on P, T, and the composition of the system, they vary from 1 to 11 for Au and 0.02 to 1 for Pd. The phase solubility technique was used to determine Au and Pd solubility in hydrothermal fluid. The effects of temperature, composition, and fluid acidity on Au and Pd solubility have been estimated. The high solubility of these metals in aqueous chloride solutions has been established for both Au (28–803 mg/kg at T = 300°C, 305–1123 mg/kg at T = 350°C, and 330–1400 mg/kg at T = 400°C) and Pd (40–126 mg/kg at T = 300°C, 62–152 mg/kg at T = 350°C, and 20–210 mg/kg at T = 400°C). The coefficients of REE and Y partitioning (D F/L) between fluid and tholeiitic or alkaline melts have been determined. They vary from 0.00n to 2 depending on P, T, and fluid composition. The experimental data on Au and Pd solubility in solutions and magmatic fluids and the wide variation of REE D F/L between fluid and melt show that magmatic and hydrothermal fluids are efficient agents of Au, Pd, and REE transfer and fractionation. The obtained experimental data were used for elucidating sources of fluids and their role in the genesis of Au-Pd-REE occurrences in the Subpolar Urals.  相似文献   

3.
The Kendekeke polymetallic deposit, located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin, is a polygenetic compound deposit in the Qimantag metallogenic belt of Qinghai Province. Multi-periodic ore-forming processes occurred in this deposit, including early-stage iron mineralization and lead-zinc-gold-polymetallic mineralization which was controlled by later hydrothermal process. The characteristics of the ore-forming fluids and mineralization were discussed by using the fluid inclusion petrography, Laser Raman Spectrum and micro-thermometry methods. Three stages, namely, S1-stage(copper-iron-sulfide stage), S2-stage(lead-zinc-sulfide stage) and C-stage(carbonate stage) were included in the hydrothermal process as indicated by the results of this study. The fluid inclusions are in three types: aqueous inclusion(type I), CO2-aqueous inclusion(type II) and pure CO2 inclusion(type III). Type I inclusions were observed in the S1-stage, having homogenization temperature at 240–320oC, and salinities ranging from 19.8% to 25.0%(wt % NaCl equiv.). All three types of inclusions, existing as immiscible inclusion assemblages, were presented in the S2-stage, with the lowest homogenization temperature ranging from 175 oC to 295oC, which represents the metallogenic temperature of the S2-stage. The salinities of these inclusions are in the range of 1.5% to 16%. The fluid inclusions in the C-stage belong to types I, II and III, having homogenization temperatures at 120–210oC, and salinities ranging from 0.9% to 14.5%. These observations indicate that the ore-forming fluids evolved from high-temperature to lowtemperature, from high-salinity to low-salinity, from homogenization to immiscible separation. Results of Laser Raman Spectroscopy show that high density of CO2 and CH4 were found as gas compositions in the inclusions. CO2, worked as the pH buffer of ore-forming fluids, together with reduction of organic gases(i.e. CH4, etc), affected the transport and sediment of the minerals. The fluid system alternated between open and close systems, namely, between lithostatic pressure and hydrostatic pressure systems. The calculated metallogenic pressures are in the range of 30 to 87 Mpa corresponding to 3 km mineralization depth. Under the influence of tectonic movements, immiscible separation occurred in the original ore-forming fluids, which were derived from the previous highsalinity, high-temperature magmatic fluids. The separation of CO2 changed the physicochemical properties and composition of the original fluids, and then diluted by mixing with extraneous fluids such as meteoric water and groundwater, and metallogenic materials in the fluids such as lead, zinc and gold were precipitated.  相似文献   

4.
Porphyry Cu-Mo-Au mineralisation with associated potassic and phyllic alteration, an advanced argillic alteration cap and epithermal quartz-sulphide-gold-anhydrite veins, are telescoped within a vertical interval of 400-800 m on the northeastern margin of the Thames district, New Zealand. The geological setting is Jurassic greywacke basement overlain by Late Miocene andesitic-dacitic rocks that are extensively altered to propylitic and argillic assemblages. The porphyry Cu-Mo-Au mineralisation is hosted in a dacite porphyry stock and surrounding intrusion breccia. Relicts of a core zone of potassic K-feldspar-magnetite-biotite alteration are overprinted by phyllic quartz-sericite-pyrite or intermediate argillic chlorite-sericite alteration assemblages. Some copper occurs in quartz-magnetite-chlorite-pyrite-chalcopyrite veinlets in the core zone, but the bulk of the copper and the molybdenum are associated with the phyllic alteration as disseminated chalcopyrite and as molybdenite-sericite-carbonate veinlets. The advanced argillic cap has a quartz-alunite-dickite core, which is enveloped by an extensive pyrophyllite-diaspore-dickite-kaolinite assemblage that overlaps with the upper part of the phyllic alteration zone. Later quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins occur within and around the margins of the porphyry intrusion, and are associated with widespread illite-carbonate (argillic) alteration. Multiphase fluid inclusions in quartz stockwork veins associated with the potassic alteration trapped a highly saline (50-84 wt% NaCl equiv.) magmatic fluid at high temperatures (450 to >600 °C). These hypersaline brines were probably trapped at a pressure of about 300 bar, corresponding to a depth of 1.2 km under lithostatic conditions. This shallow depth is consistent with textures of the host dacite porphyry and reconstruction of the volcanic stratigraphy. Liquid-rich fluid inclusions in the quartz stockwork veins and quartz phenocrysts trapped a lower salinity (3-20 wt% NaCl equiv.), moderate temperature (300-400 °C) fluid that may have caused the phyllic alteration. Fluid inclusions in the quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins trapped dilute (1-3 wt% NaCl equiv.) fluids at 250 to 320 °C, at a minimum depth of 1.0 km under hydrostatic conditions. Oxygen isotopic compositions of the fluids that deposited the quartz stockwork veins fall within the 6 to 10‰ range of magmatic waters, whereas the quartz-sulphide-gold-anhydrite veins have lower '18Owater values (-0.6 to 0.5‰), reflecting a local meteoric water (-6‰) influence. A '18O versus 'D plot shows a trend from magmatic water in the quartz stockwork veins to a near meteoric water composition in kaolinite from the advanced argillic alteration. Data points for pyrophyllite and the quartz-sulphide-gold-anhydrite veins lie about midway between the magmatic and meteoric water end-member compositions. The spatial association between porphyry Cu-Mo-Au mineralisation, advanced argillic alteration and quartz-sulphide-gold-anhydrite veins suggests that they are all genetically part of the same hydrothermal system. This is consistent with K-Ar dates of 11.6-10.7 Ma for the intrusive porphyry, for alunite in the advanced argillic alteration, and for sericite selvages from quartz-gold veins in the Thames district.  相似文献   

5.
乌拉根铅锌矿床和萨热克铜矿床是西南天山中新生代盆地最有代表性的两个层控砂砾岩型矿床,乌拉根铅锌矿床产于下白垩统克孜勒苏群第五岩性段(K1 kz5)的粗砂质细砾岩中,后期经历了弱的构造改造作用;萨热克铜矿床产于上侏罗统库孜贡苏组上段(J3 k2)杂砾岩中,其北矿段后期经历了强烈的构造改造作用,南矿段可见岩浆热液蚀变作用后...  相似文献   

6.
The Sar-Cheshmeh porphyry Cu–Mo deposit is located in Southwestern Iran (∼65 km southwest of Kerman City) and is associated with a composite Miocene stock, ranging in composition from diorite through granodiorite to quartz-monzonite. Field observations and petrographic studies demonstrate that the emplacement of the Sar-Cheshmeh stock took place in several pulses, each with associated hydrothermal activity. Molybdenum was concentrated at a very early stage in the evolution of the hydrothermal system and copper was concentrated later. Four main vein Groups have been identified: (I) quartz+molybdenite+anhydrite±K-feldspar with minor pyrite, chalcopyrite and bornite; (II) quartz+chalcopyrite+pyrite±molybdenite±calcite; (III) quartz+pyrite+calcite±chalcopyrite±anhydrite (gypsum)±molybdenite; (IV) quartz±calcite±gypsum±pyrite±dolomite. Early hydrothermal alteration produced a potassic assemblage (orthoclase-biotite) in the central part of the stock, propylitic alteration occurred in the peripheral parts of the stock, contemporaneously with potassic alteration, and phyllic alteration occurred later, overprinting earlier alteration. The early hydrothermal fluids are represented by high temperature (350–520 °C), high salinity (up to 61 wt% NaCl equivalent) liquid-rich fluid inclusions, and high temperature (340–570 °C), low-salinity, vapor-rich inclusions. These fluids are interpreted to represent an orthomagmatic fluid, which cooled episodically; the brines are interpreted to have caused potassic alteration and deposition of Group I and II quartz veins containing molybdenite and chalcopyrite. Propylitic alteration is attributed to a liquid-rich, lower temperature (220–310 °C), Ca-rich, evolved meteoric fluid. Influx of meteoric water into the central part of the system and mixing with magmatic fluid produced albitization at depth and shallow phyllic alteration. This influx also caused the dissolution of early-formed copper sulphides and the remobilization of Cu into the sericitic zone, the main zone of the copper deposition in Sar-Cheshmeh, where it was redeposited in response to a decrease in temperature.  相似文献   

7.
《Lithos》1987,20(2):135-151
DSDP Hole 504B, located on the south flank of the Costa Rica Rift, shows the most complete reference section through the upper oceanic crust; 274.5 m into the sediment and 1075.5 m into the basement have been penetrated.Very unusual secondary parageneses occur in some basaltic massive flows recovered at DSDP Hole 504 B. Replacement of magmatic augite by secondary Ti- and/or Na-rich augite and aegirine-augite was observed in five veins between the 298 and 685 m sub-basement depth; one of these veins also contains melanite (Ti-rich andradite) and another one contains fassaite. These minerals seem independent of, and prior to, other alteration stages.The conditions of formation and origin of the fluids responsible for the crystallization of these unusual minerals are discussed. Several arguments suggest that their origin is not hydrothermal, but possibly deuteric: (1) these minerals probably formed at higher temperatures than hydrothermal minerals from DSDP Hole 504 B (300–400°C for melanite, 800–1000°C (?) for fassaite, >400°C for aegirine-augite); (2) the chemical composition of the studied minerals are not compatible with the chemical composition of hydrothermal fluids responsible for the alteration at DSDP Hole 504 B; (3) the distribution and chemical composition of these minerals seem to be independent of the alteration zonation and thus of depth; and (4) these minerals are anhydrous, in contrast to mostly hydrated minerals from DSDP Hole 504 B known to be hydrothermal in origin. Moreover, since these minerals occur in subophitic or coarse-grained basalts, their crystallization may have been enhanced by the long standing stability of the physico-chemical conditions existing in the veins.  相似文献   

8.
Homogenization temperatures and salinity data are presented for fluid inclusions from hydrothermal gangue minerals (quartz and fluorite) associated with porphyry wolframite-molybdenite-arsenopyrite-sphaleritebismuth-chalcopyrite-cassiterite mineralization within the Fire Tower ore zone, Mt Pleasant, New Brunswick. The data indicate that ore mineral precipitation occurred within a temperature range of 260° to 490°C from moderate to high salinity (10–42 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized by high (>30 wt% NaCl equivalent) salinity fluids are recognized; one which occurred at relatively high temperature (350°–490°C); and one which took place at lower temperature (180°–250°C). The high salinity, high temperature stage is interpreted to be the result of resurgent boiling. Dilution of these early fluids by convecting meteoric water resulted in low to moderate salinity fluids, which dominate the inclusion population. The low temperature, high salinity fluid inclusions are interpreted to represent late residual fluids derived from boiling which occurred as a result of a change in the pressure regime from dominantly lithostatic to hydrostatic conditions.  相似文献   

9.
Draa Sfar is a polymetallic (Zn–Pb–Cu) volcanogenic massive sulfide deposit with an actual resource of 13 Mt at 4.0% Zn and 1.3% Pb. It is part of the central Jbilets area known for its several Cu–Zn ore deposits. The ore is hosted in the upper Visean-Namurien sedimentary formation. Owing to the complexity of the geology of the ore deposits, numerical simulation approach was attempted to shed light into the temperature distribution, the circulation of the hydrothermal fluid and the genesis of massive sulfide ore bodies by evaluating the permeability, porosity, and thermal conductivity. On the basis of this simulation approach, the ore is predicted to be deposited at a temperature ranging between 230 and 290 °C. This temperature range is dependent on the pre-existing temperature of the discharge area where a metal-rich fluid precipitated the ore. The duration of the Draa Sfar ore body formation is predicted to be 15, 000 to 50, 000 years. Based on geological studies of Draa Sfar deposit together with the aforementioned results of the simulation approach, an ore genetic model for the massive sulfide ore bodies is proposed. In this model, the supply of ore-forming fluids is ensured by the combination of seawater and magmatic waters. Magma that generated rhyodacite dome acted as the heat source that remobilized the circulation of these ore-bearing fluids. The NW-SE trending faults acted as potential pathways for both the downward and upward migration of the ore-forming fluids. Due to their high permeability, the ignimbritic facies, host rocks of Draa Sfar ore bodies, have favored the circulation of the fluids. The mixing between the ore-forming fluids of magmatic origin and the descending seawaters and/or in situ pore waters led to the formation the ore bodies in 35,000 years. The position and size of the ore body, determined by the simulation approach, is consistent with the actual field geological data.  相似文献   

10.
The Wakamiko submarine crater is a small depression located in Kagoshima Bay, southwest Japan. Marine shallow‐water hydrothermal activity associated with fumarolic gas emissions at the crater sea floor (water depth 200 m) is considered to be related with magmatic activity of the Aira Caldera. During the NT05‐13 dive expedition conducted in August 2005 using remotely operated vehicle Hyper‐Dolphine (Japan Agency for Marine‐Earth Science and Technology), an active shimmering site was discovered (tentatively named the North site) at approximately 1 km from the previously known site (tentatively named the South site). Surface sediment (up to 30 cm) was cored from six localities including these active sites, and the alteration minerals and pore fluid chemistry were studied. The pore fluids of these sites showed a drastic change in chemical profile from that of seawater, even at 30 cm below the surface, which is attributed to mixing of the ascending hydrothermal component and seawater. The hydrothermal component of the North site is estimated to be derived from a hydrothermal aquifer at 230°C based on the hydrothermal end‐member composition. Occurrence of illite/smectite interstratified minerals in the North site sediment is attributed to in situ fluid–sediment interaction at a temperature around 150°C, which is in accordance with the pore fluid chemistry. In contrast, montmorillonite was identified as the dominant alteration mineral in the South site sediment. Together with the significant low potassium concentration of the hydrothermal end‐member, the abundant occurrence of low‐temperature alteration mineral suggests that the hydrothermal aquifer in the South site is not as high as 200°C. Moreover, the montmorillonite is likely to be unstable with the present pore fluid chemistry at the measured temperature (117°C). This disagreement implies unstable hydrothermal activity at the South site, in contrast to the equilibrium between the pore fluid and alteration minerals in the North site sediment. This difference may reflect the thermal and/or hydrological structure of the Wakamiko Crater hydrothermal system.  相似文献   

11.
Titanite (sphene, CaTiSiO5) is sensitive to changes in temperature, oxygen and water fugacity, and fluid composition. In order to understand formation processes and the nature of hydrothermal fluids, various types of titanite from Cu ores at the Baogutu reduced porphyry Cu deposit were chosen for detailed study. Magmatic titanite is associated with biotite, plagioclase and K-feldspar, whereas hydrothermal titanite occurs with K-feldspar, chlorite, actinolite and calcite. The formation of hydrothermal titanite was related to hydration of igneous minerals under high fH2O, whereas the widespread replacement of ilmenite by titanite (without magnetite) indicates a relatively low oxygen fugacity. Magmatic titanite has low Al, high Fe, Y, Sn, Zr, Nb and REE contents, relative to hydrothermal titanite. On the basis of the Zr-in-titanite and Al-in-chlorite geothermometers, formation temperatures for magmatic and hydrothermal titanite are estimated to be 687–739 °C and 250–670 °C, respectively. The gradual decrease in REE, Y and Sn contents from magmatic to late hydrothermal titanite was probably caused by precipitation of REE-bearing minerals. Magmatic and hydrothermal titanites have similar chondrite-normalized REE patterns with negative Eu anomalies and relatively flat HREE. Randomly selected titanites have Nd isotopic compositions similar to the host rocks. Thus, both magmatic and hydrothermal titanite are believed to have been predominantly derived from a mantle source.  相似文献   

12.
Information from a database, which was compiled and continuously updated by the authors of this paper and now includes information from 19500 publication on fluid and melt inclusions in minerals, is used to summarize results on the physicochemical formation parameters of hydrothermal Au, Ag, Pb, and Zn deposits. The database provides information on fluid inclusions in minerals from 970 Pb-Zn, 220 Au-Ag-Pb-Zn, and 825 Au-Ag deposits in various settings worldwide. Histograms for the homogenization temperatures of fluid inclusion are presented for the most typical minerals of the deposits. In sphalerite, most homogenization temperatures (1327 measurements) of fluid inclusions lie within the range of 50–200°C with a maximum at 100–200°C for this mineral from Pb-Zn deposits and within the range of 100–350°C (802 measurements) with a maximum at 200–300°C for this mineral from Au deposits. Data are presented on fluid pressures at Au (1495 measurements) and Pb-Zn (180 measurements) deposits. The pressure during the preore, ore-forming, and postore stages at these deposits ranged from 4–10 to 6000 bar. The reason for the high pressures during preore stages at the deposits is the relations of the fluids to acid magmatic and metamorphic processes. More than 70% of the fluid pressures values measured at Pb-Zn deposits lie within the range of 1–1500 bar. Au-Ag deposits are characterized by higher fluid pressures of 500–2000 bar (61% of the measurements). The overall ranges of the salinity and temperature of the mineral-forming fluid at Au-Ag (6778 measurements) and Pb-Zn (3395 measurements) deposits are 0.1–80 wt % equiv. NaCl and 20–800°C. Most measurements (~64%) for Au-Ag deposits yield fluid salinity <10 wt % equiv. NaCl and temperatures of 200–400°C (63%). Fluids at Pb-Zn deposits are typically more saline (10–25 wt % equiv. NaCl, 51% measurements) and lower temperature (100–300°C, 74% measurements). Several measurements of the fluid density fall within the range of 0.8–1.2 g/cm3. The average composition of volatile components of the fluids was evaluated by various techniques. The average composition of volatile components of fluid inclusions in minerals is calculated for hydrothermal W, Au, Ag, Sn, and Pb-Zn deposits, metamorphic rocks, and all geological objects. The Au, Ag, Pb, and Zn concentrations in magmatic melts and mineral-forming fluids is evaluated based on analyses of individual inclusions.  相似文献   

13.
The results of the study of clay mineral alterations in Upper Pleistocene sediments of the southern trough in the Guaymas Basin (Gulf of California) due to the influence of hydrothermal solutions and heat produced by sill intrusions are discussed. Core samples from DSDP Holes 477 and 477A were taken for the analysis of clay minerals. Application of the method of modeling X-ray diffraction patterns of oriented specimens of the finely dispersed particles made it possible to establish the phase composition of clay minerals, determine their structural parameters, and obtain reliable quantitative estimates of their contents in natural mixtures. The modeling data allowed us to characterize reliably the transformation of clay minerals in sediments of the hydrothermally active southern trough in the Guaymas Basin. In Upper Pleistocene sandy–clayey sediments of the southern trough, changes in the composition of clay minerals occurred under the influence of a long-living hydrothermal system. Its lower part (interval 170.0–257.5 m) with maximum temperatures (~300°C) was marked by the formation of chlorite. Terrigenous clay minerals are not preserved here. Saponite appears at a depth of 248 m in the chlorite formation zone. Higher in the sedimentary section, the interval 146–170 m is also barren of terrigenous clay minerals. Sediments of this interval yielded two newly formed clay minerals (chlorite and illite), which were formed at lower temperatures (above 180°C and below 300°C, approximately up to ~250°C), while the relatively low-temperature upper part (110–146 m) of the hydrothermal system (from ~140°C to ~180°C) includes the mixture of terrigenous and newly formed clay minerals. Terrigenous illite is preserved here. Illitization of the mixed-layer illite–smectite was subjected to illitization. The terrigenous montmorillonite disappeared, and chlorite–smectite with 5–10% of smectite layers were formed. In the upper interval (down to approximately 110 mbsf), the composition of terrigenous clay minerals remains unchanged. They are composed of the predominant mixed-layer illite–smectite and montmorillonite, the subordinate illite, mixed-layer chlorite–smectite with 5% of smectite layers, mixed-layer kaolinite–smectite with 30% of smectite layers, and kaolinite. This composition of clay minerals changed under the influence of sill intrusions into the sedimentary cover at 58–105 m in the section of Hole 477. The most significant changes are noted in the 8-m-thick member above the sill at 50–58 m. The upper part of this interval is barren of the terrigenous mixed-layer illite–smectite, which is replaced by the newly formed trioctahedral smectite (saponite). At the same time, the terrigenous dioctahedral smectite (montmorillonite) is preserved. The composition of terrigenous clay minerals remains unchanged at the top of the unit underlying the sill base.  相似文献   

14.
The Géant Dormant gold mine is a sulfide-rich quartz vein gold deposit hosted by a volcano-sedimentary sequence and an associated felsic endogenous dome and dikes. The auriferous quartz-sulfide veins were preceded by two synvolcanic gold-bearing mineralizing events: early sulfidic seafloor-related and later disseminated pyrite in the felsic dome. This deposit differs from classical Archean auriferous quartz vein deposits by the low carbonate and high sulfide contents of the veins and by their formation prior to ductile penetrative deformation. The δ18O values of quartz associated with seafloor-related auriferous sulfides average 11.9 ± 0.6‰ (n = 3). The seafloor hydrothermal fluids had a δ18O value of 3.2‰ calculated at 250 °C. The oxygen isotope composition of quartz and chlorite from veins average 12.5 ± 0.3‰ (n = 20) and 5.9 ± 1.1‰ (n = 4) respectively. Assuming oxygen isotope equilibrium between quartz and chlorite, the veins formed at a temperature of ∼275 °C, which is consistent with the calculated temperature of 269 ± 10 °C from chlorite chemistry. The gold-bearing fluids had a δ18O value of 4.7‰ calculated at 275 °C. The δ34S values of sulfides from the three gold events range from 0.6 to 2.8‰ (n = 32) and are close to magmatic values. Sulfur isotope geothermometry constrains the sulfide precipitation in the gold-bearing veins at a temperature of ∼350 °C. The similarity of the isotope data, the calculated δ18O of the mineralizing fluids and the likely seawater fluid source suggest that the three mineralizing events are genetically related to a volcanogenic hydrothermal system. The high value of the auriferous fluids (δ18O = 4.7‰) is attributed to a significant magmatic fluid contribution to the evolved seawater-dominated convective hydrothermal system. The two-stage filling of veins at increasing temperature from quartz-chlorite (275 °C) to sulfides (350 °C) may reflect the progressive maturation of volcanogenic hydrothermal systems. These results, together with field and geochemical data, suggest that formation of gold-rich volcanogenic systems require specific conditions that comprise a magmatic fluid contribution and gold from arc-related felsic rocks, coeval with the mineralizing events. This study shows that some auriferous quartz-vein orebodies in Archean terranes are formed in volcanogenic rather than mesothermal systems. Received: 12 December 1998 / Accepted: 5 July 1999  相似文献   

15.
The Daraloo field is located in the southeast of Iran (Kerman province). It is associated with Oligomiocene diorite/granodiorite to quartz monzonite stocks. Copper mineralization is basically relevant to potassic and phyllic alteration zones. Petrographic and geologic studies imply that mineralization is restricted to two major parts locating in the center and east of district. The larger central mineralization has a northwest–southeast trend perpendicular to the smaller one. Hydrothermal ore fluid formation occurred in relatively deep levels thereafter faulting and fracturing provided appropriate conduits to ascend fluids through shallower depths. Early hydrothermal alteration produced a confined potassic assemblage in the central and eastern parts of the stock. Two main fluid inclusion groups in relationship with alteration ore fluids have been identified. They are liquid-rich inclusions containing solid phases, with high temperatures (257°C to 554°C) and high salinities (31 to 67 wt.% NaCl equiv.), and vapor-rich inclusions with high temperatures and low salinities without any solid phases. These magmatic source fluids are responsible for boiling and also potassic and phyllic alteration zone. They also resulted in the formation of quartz groups I and II veins and chalcopyrite deposition. Propylitic alteration is attributed to a Ca-rich meteoric fluid. Inclusions originated from this fluid are liquid-rich having low temperatures (161°C to 269°C) and low salinities (1 to 13 wt.% NaCl). Mixing descending meteoric water with magmatic fluids reduces considerably the salinity of magmatic fluid. Mixing is also the impetus of leaching copper from potassic to the phyllic zone. It is possible to conclude that all these procedures are controlled by the main faults of district having NW–SE trend. Two fundamental events affecting the mineralization are cooling ore-bearing fluids and magnetite (±pyrite) emplacement. The latter one is formed in potassic and phyllic alteration zone in which copper-bearing fluids have interaction with magnetite minerals and so chalcopyrite minerals have been formed nearby magnetites. Temperature and pressure of hydrothermal fluid differentiation could be applied as a predictive tool to discriminate between barren and productive copper porphyry deposits. A simple comparison of temperature and pressure variations between Daraloo deposit and other copper porphyry deposits located in the same belt of Iran (Sahand-Bazman belt) illuminates that Daraloo system has high range of pressure implying deeper exsolution of hydrothermal fluid. On the other hand, economic mineralization has direct relationship with temperature range of orthomagmatic fluids so that if a deposit has a wide range of high temperature fluids, it could be inferred as a barren deposit. In conclusion, it could be inferred that Daraloo district can be categorized as a sub-economic porphyry deposit. On the other hand, restricted formation of chalcopyrite and the other copper-bearing minerals besides large amounts of magnetite and pyrite can approve obviously the low grade of mineralization in Daraloo district.  相似文献   

16.
《Chemical Geology》2002,182(2-4):357-375
This is the first report about silica-rich hydrothermal precipitates which were sampled together with hydrothermal sulfides (chimney fragments) in an extinct vent field in the Central Indian Ocean. There are two kinds of silica-rich rocks: a jasper which is impregnated and replaced to various degrees mainly by sphalerite, and to a lesser extent by barite, pyrite and traces of chalcopyrite, and an opalite which is an almost pure silica-phase without any sulfide or sulfate impregnations, but which is sometimes covered by manganese crusts.No internal concentric zoning indicating typical chimney structures can be recognized in the jasper and/or opalite samples, the textures rather suggest a sedimentary silica and/or iron deposition from diffuse, low-temperature (±60 °C) vent fluids, partly with still visible indications of former bacterial mats and synsedimentary deformation structures; the sphalerite- and barite-impregnations within the jasper, however, are considered to have precipitated from white-smoker-type fluids since they were deposited under intermediate temperatures between 155 and 265 °C, according to fluid inclusion studies.The sulfur isotopic composition (δ34S) of our sulfide samples has mean values of 6.1% for sphalerite and 5.7% for pyrite indicating a mixture of predominantly basaltic sulfur with subordinate amounts of reduced seawater sulfur. The oxygen isotope signals of some pure jasper concentrate samples indicate that the mean formation temperature calculated from these values lies at 63.2 °C.The relationship between the massive pyrite- and chalcopyrite-ores from the extinct chimney structures and the silica-rich precipitates can be explained by different cycles of hydrothermal activity: one high-temperature (above 300 °C) cycle dominated by pyrite and chalcopyrite formation and one later epithermal (below 300 °C) cycle which resulted in sphalerite- and silica-dominated precipitates. Furthermore, zonation and zone-refining processes are part of the evolution of the mineralized field.  相似文献   

17.
The hydrothermal Mo-U deposits of the Strel’tsovka ore field, unique in reserves, are localized in the Late Mesozoic caldera of the same name. The consideration of geochemical processes that controlled uranium transfer by ore-bearing fluids and its precipitation in orebodies has shown that a nonstationary temperature distribution could have exerted a substantial effect on ore formation. The temperature field in the Strel’tsovka caldera, which was caused by a shallow-seated magma chamber that existed beneath the caldera by the onset of the ore stage, was simulated by mathematical modeling. A one-dimensional nonstationary model of conductive heat transfer taking into account the latent heat of magmatic melt crystallization was used. The problem was solved with the finite difference method. It has been established that, at optimal parameters of the model, the magma chamber would have completely crystallized in 56 ka; the maximum estimate is 133 ka. Three million years after emplacement of the granitic intrusion, the related thermal anomaly in the upper crust should have disappeared. The results obtained indicate that granitic melt of this chamber could not have been a source of uranium-bearing solutions that formed deposits 5 Ma after the cessation of magmatic activity.  相似文献   

18.
与岩浆作用有关的热液矿床的形成,在一定程度上是岩浆体系内富含挥发分流体的组成、压力及性质演变的结果。长英质岩浆中无水硅酸盐矿物的结晶导致挥发性组分以气泡形式存在。气泡的体积随岩浆演化程度增强而不断增大,由于两不混溶流体之密度差而产生的力的作用使气泡相对硅酸盐熔体(+晶体)超前向上迁移,最终到达岩浆房顶部。长英质岩浆中富含挥发分流体的迁移运动是通过气泡的上浮实现的。气泡能否上浮主要取决于气泡的体积大小和受力的强度。只有体积较大的气泡才可能迅速迁移并到达岩浆房顶部。修正后的Darcy定律对气泡(岩浆体系中的流体)的上述运动特征给予了物理学方法的描述。  相似文献   

19.
Abstract: The origin of mineralizing fluids responsible for the Hishikari vein-type epithermal Au deposits was studied on the basis of the hydrogen isotopic ratio (δD) of the inclusion fluid from vein quartz and adularia. The origin of hydrothermal fluids was estimated by combination of the present δ values and the oxygen isotopic ratios (δ18O) previously reported by Shikazono and Nagayama (1993). The water in the fluid inclusions was extracted by means of decrepitation of quartz at 500°C. Hydrogen was obtained by reduction of the collected water with Zn shot at 450°C. The δD values were determined by mass spectrometer. The δD values of inclusion fluid obtained from quartz range from –61 to –114%. These are significantly lower than the δD value of the thermal water presently venting from the Hishikari deposits and that of local meteoric water. Hydrogen isotopic fractionation between water and amorphous silica, which might have initially precipitated from the hydrothermal fluids at least partly, is not a probable cause of this isotopic depletion, while some water might have been released from the initial hydrous amorphous silica during recrystallization to quartz observed presently. Thus, a part of ore fluids for the Hishikari deposits is supposed to have been originated from the water having anomalous δD values of lower than –100%. Such D depletion cannot be caused by simple oxygen-shift of meteoric water or by contribution of magmatic volatiles. The δD values of water released from the shale samples of the Shimanto–Supergroup, a major host to the Hishikari veins range from –132 to –148%. Therefore, the anomalous δD values of inclusion fluids from some vein quartz and adularia suggest that the water released from hydrous minerals of the sedimentary basement rocks by dehydration or the groundwater isotopically exchanged with sedimentary rocks at elevated temperatures during circulation, partly contributed to the hydrothermal fluids responsible for the Hishikari deposits.  相似文献   

20.
硅酸盐熔体体系中,锌主要赋存于熔体相,部分以类质同象的形式进入铁、镁硅酸盐及铁的氧化物中;流体/熔体相分 离时,锌优先进入流体相;卤水/气相分离时,锌优先进入卤水相;成矿过程中,锌主要进入液相流体中迁移。在热液环境 下, ZnCl2 - nn (0≤n≤4) 络合物是迁移锌的最重要形式,其次游离Zn2+,Zn2+-SO2 -4 络合物,Zn2+OH-络合物,在一定条件下对锌的运移也非常重要,但能与锌络合的其它潜在无机配体,如HS-,CO32-,NH3,F-,Br-, S2 -x 及S2O2 - 3 等,则意义不大。富有机质低温(<200℃) 条件下,部分有机质对锌的迁移也具有重要作用,如,羧酸、氨基酸及腐殖酸,其中羧酸意义最大。在Zn成矿过程中,岩浆-热液Zn矿床矿化可划分为三个阶段,早期岩浆房去气阶段,期后热液阶段,以及晚期岩浆房去气阶段。层控Zn矿床流体主要为盆地卤水,矿化机制主要为伸展背景下的海底热液对流,或者挤压环境下,构造挤压与重力的联合驱动,促使流体向盆地边缘迁移成矿。锌矿物的沉淀主要受热液组成、温度、压力、pH以及Eh等因素控制,地质过程中,围岩蚀变、沸腾作用以及流体混合作用等宏观过程促使上述物理化学因素发生变化,从而制约着锌的沉淀。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号