Side-Scan Sonar Characteristics and Manganese Nodule Abundance in the Clarion—Clipperton Fracture Zones, NE Equatorial Pacific

The deep ocean floor between the Clarion and Clipperton fracture zones (NE equatorial Pacific) has the highest known manganese nodule abundance in the world oceans. A detailed analysis of MR1 (Mapping Researcher 1, 11-12 kHz) sonar images and free-fall grab data in the Korean manganese nodule field areas reveals a close relationship between side-scan sonar characteristics of the seafloor and manganese nodule abundance. Eight sonar facies are identified based on back-scattering intensity and distribution patterns. These sonar facies can be interpreted as (1) volcanic seamounts (facies I-1), (2) bounding faults of abyssal hills (facies I-2 and II-1), (3) lava flows or volcanoclastic mass-flow deposits around the volcanic seamounts (facies I-3 and II-2), (4) crests of abyssal hills (facies II-1), (5) abyssal troughs between abyssal hills (facies III-1), (6) relatively flat areas (facies II-3 and III-2). In the areas where facies II-1 (abyssal hill crests with thin sediment cover) and II-3 (relatively flat areas draped by thin sediments) are dominant, manganese nodules occur abundantly. In contrast, zones comprising facies III-1 (abyssal troughs with thick sediment cover) and III-2 (relatively flat areas covered by thick sediments) are characterized by low abundance of manganese nodules. This relationship between distribution of sonar facies and manganese nodule abundance implies that (1) the qualitative difference in acoustic reflectivity of long-range side-scan sonar with some ground truth data is useful for regional assessment of manganese nodule occurrence over wide areas in a reasonable time, and (2) seafloor topography and sediment thickness are important controlling factors for regional occurrences of manganese nodules.     

Side-Scan Sonar Characteristics and Manganese Nodule Abundance in the Clarion—Clipperton Fracture Zones,NE Equatorial Pacific

The deep ocean floor between the Clarion and Clipperton fracture zones (NE equatorial Pacific) has the highest known manganese nodule abundance in the world oceans. A detailed analysis of MR1 (Mapping Researcher 1, 11–12?kHz) sonar images and free-fall grab data in the Korean manganese nodule field areas reveals a close relationship between side-scan sonar characteristics of the seafloor and manganese nodule abundance. Eight sonar facies are identified based on back-scattering intensity and distribution patterns. These sonar facies can be interpreted as (1) volcanic seamounts (facies I-1), (2) bounding faults of abyssal hills (facies I-2 and II-1), (3) lava flows or volcanoclastic mass-flow deposits around the volcanic seamounts (facies I-3 and II-2), (4) crests of abyssal hills (facies II-1), (5) abyssal troughs between abyssal hills (facies III-1), (6) relatively flat areas (facies II-3 and III-2). In the areas where facies II-1 (abyssal hill crests with thin sediment cover) and II-3 (relatively flat areas draped by thin sediments) are dominant, manganese nodules occur abundantly. In contrast, zones comprising facies III-1 (abyssal troughs with thick sediment cover) and III-2 (relatively flat areas covered by thick sediments) are characterized by low abundance of manganese nodules. This relationship between distribution of sonar facies and manganese nodule abundance implies that (1) the qualitative difference in acoustic reflectivity of long-range side-scan sonar with some ground truth data is useful for regional assessment of manganese nodule occurrence over wide areas in a reasonable time, and (2) seafloor topography and sediment thickness are important controlling factors for regional occurrences of manganese nodules.     

地形坡度对多金属结核分布的控制作用

选取我国东太平洋多金属结核开辟区内的一个区域作为研究区,利用人工神经网络中应用最为广泛的BP网络,建立控制多金属结核分布的地质因素与多金属结核分布之间的映射关系,探讨地形坡度对多金属结核分布的控制作用.结果表明,在经度、纬度、水深、坡度四个因素中,坡度对结核分布影响程度最大;多金属结核主要分布于坡度小于5°的地方;当坡度小于5°时,丰度与地形坡度呈正相关,品位与地形坡度呈负相关,丰度与品位呈负相关;品位与坡度似呈指数关系,坡度增大,品位降低.     

Characterizing Indian Ocean manganese nodule-bearing seafloor using multi-beam angular backscatter

Application of quantitative angular backscatter modelling to manganese nodule-bearing areas of the Central Indian Ocean Basin (CIOB) has been initiated at NIO during the year 1998. Studies were aimed to establish the suitability of seafloor backscattering in delineating seafloor parameters characteristic of nodule-rich sediments. In this paper, processed Hydrosweep multi-beam backscatter data from 45 spot locations in the CIOB (where nodule samples are available) were analysed to estimate seafloor and sediment volume roughness parameters. The application of a composite roughness model to a nodule-bearing region (6,600 km²) of the CIOB, to determine seafloor interface roughness parameters from a multi-beam backscatter dataset, shows only four power law sets. The results attest 80% of the nodule-bearing seafloor to be smooth in terms of interface roughness parameters at micro-topographic level. The sediment volume roughness parameters are dominant only in 29% of the smooth interface roughness sites. This indicates that 51% of the seafloor area possesses negligible (interface and volume) roughness. A critical analysis using pseudo-side-scan records from 12 selected locations in the study area affirms the combined importance of the seafloor interface and sediment volume roughness parameters for precise determination of manganese nodule abundance.     

Image analysis of seafloor photographs for estimation of deep-sea minerals

Factors such as non-uniform illumination of seafloor photographs and partial burial of polymetallic nodules and crusts under sediments have prevented the development of a fully automatic system for evaluating the distribution characteristics of these minerals, necessitating the involvement of a user input. A method has been developed whereby spectral signatures of different features are identified using a software ‘trained’ by a user, and the images are digitized for coverage estimation of nodules and crusts. Analysis of >20,000 seafloor photographs was carried out along five camera transects covering a total distance of 450 km at 5,100–5,300 m water depth in the Central Indian Ocean. The good positive correlation (R² > 0.98) recorded between visual and computed estimates shows that both methods of estimation are highly reliable. The digitally computed estimates were ∼10% higher than the visual estimates of the same photographs; the latter have a conservative operator error, implying that computed estimates would more accurately predict a relatively high resource potential. The fact that nodules were present in grab samples from some locations where photographs had nil nodule coverage emphasises that nodules may not always be exposed on the seafloor and that buried nodules will also have to be accounted for during resource evaluation. When coupled with accurate positioning/depth data and grab sampling, photographic estimates can provide detailed information on the spatial distribution of mineral deposits, the associated substrates, and the topographic features that control their occurrences. Such information is critical for resource modelling, the selection of mine sites, the designing of mining systems and the planning of mining operations.     

Characteristics of Seafloor Morphology and Ferromanganese Nodule Occurrence in the Korea Deep-sea Environmental Study (KODES) Area,NE Equatorial Pacific

Abstract

Seafloor morphology and ferromanganese nodule occurrence were studied using a multibeam side scan sonar (SeaBeam, 2000) and a deep-sea camera system in the Korea Deep-sea Environmental Study (KODES) area, northeast equatorial Pacific. Seafloor morphology and nodule abundance are highly variable even in this small study area. The NNE-SSW oriented hills are parallel and about 100–200 m high. Valleys are very flat-floored, while hilltops are rugged with depressions of tens of meters. Cliffs to about 100 m bound the valleys and the hills. The study area can be classified into three types based both on nodule occurrence and seafloor morphology, mostly G- and B-types and some M-type. G-type is characterized by high nodule abundance, ubiquitous bioturbation, and flat seafloor morphology, while B-type is characterized by irregular-shaped nodules, variable nodule abundance, occurrence of giant nodules and sediment lumps, rugged bottom morphology with depressions, and white calcareous surface sediments. Medium nodule abundance and a generally flat seafloor characterize M-type. G-type occurs mostly in the valley regions, while B-type is on the hilltop areas. M-type is located between the hilltop and the valley. Tectonic movement of the Pacific plate resulted in the elongated abyssal hills and cliffs. The rugged morphology on hilltops resulted from erosion and redistribution of surface siliceous sediments on hilltops by bottom currents, outcropping of underlying calcareous sediments, and dissolution of the carbonate sediments by corrosive bottom water undersaturated with CaCO₃. Sediment eroded from the hills, which is relatively young and organic-rich, is deposited in the valleys, and diagenetic metal supply to manganese nodules in the valley area is more active than on the hills. We suggest that tectonic movement ultimately constrains morphology, surface sediment facies, bottom currents and sediment redistribution, bioturbation, thickness of the sedimentary layer, and other conditions, which are all interrelated and control nodule occurrence. The best potential area for mining in the study area is the G-type valley zones with about 3–4 km width and NNW-SSE orientation.     

Characteristics of Seafloor Morphology and Ferromanganese Nodule Occurrence in the Korea Deep-sea Environmental Study (KODES) Area, NE Equatorial Pacific

Seafloor morphology and ferromanganese nodule occurrence were studied using a multibeam side scan sonar (SeaBeam, 2000) and a deep-sea camera system in the Korea Deep-sea Environmental Study (KODES) area, northeast equatorial Pacific. Seafloor morphology and nodule abundance are highly variable even in this small study area. The NNE-SSW oriented hills are parallel and about 100-200 m high. Valleys are very flat-floored, while hilltops are rugged with depressions of tens of meters. Cliffs to about 100 m bound the valleys and the hills. The study area can be classified into three types based both on nodule occurrence and seafloor morphology, mostly G- and B-types and some M-type. G-type is characterized by high nodule abundance, ubiquitous bioturbation, and flat seafloor morphology, while B-type is characterized by irregular-shaped nodules, variable nodule abundance, occurrence of giant nodules and sediment lumps, rugged bottom morphology with depressions, and white calcareous surface sediments. Medium nodule abundance and a generally flat seafloor characterize M-type. G-type occurs mostly in the valley regions, while B-type is on the hilltop areas. M-type is located between the hilltop and the valley. Tectonic movement of the Pacific plate resulted in the elongated abyssal hills and cliffs. The rugged morphology on hilltops resulted from erosion and redistribution of surface siliceous sediments on hilltops by bottom currents, outcropping of underlying calcareous sediments, and dissolution of the carbonate sediments by corrosive bottom water undersaturated with CaCO 3 . Sediment eroded from the hills, which is relatively young and organic-rich, is deposited in the valleys, and diagenetic metal supply to manganese nodules in the valley area is more active than on the hills. We suggest that tectonic movement ultimately constrains morphology, surface sediment facies, bottom currents and sediment redistribution, bioturbation, thickness of the sedimentary layer, and other conditions, which are all interrelated and control nodule occurrence. The best potential area for mining in the study area is the G-type valley zones with about 3-4 km width and NNW-SSE orientation.     

深海浅地层剖面特征及其与多金属结核富集度的关系

对东太平洋 Ｃ Ｃ 区内 １ 万多公里的浅地层剖面探测资料进行了统计分析, 并对深海浅地层剖面特征及其与多金属结核丰度的关系作了研究, 结果表明： 多金属结核的富集度与海底声反射率呈正比关系, 影响和控制结核丰度的主要因素是海底地形。一般透明层愈厚, 结核愈富集, 但不是对应关系; 层状层或散射层发育, 则多金属结核富集, 反之则不富集     

Quantitative estimation of seafloor features from photographs and their application to nodule mining

Methods developed for quantitative estimation of seafloor features from seabed photographs and their application for estimation of nodule sizes, coverage, abundance, burial, sediment thickness, extent of rock exposure, density of benthic organisms, and their lebensspuren have been presented. Digitization of the photographs shows variable nodule size (< 1 to 10 cm), coverage (< 1 to 75%) and abundance (< 1 to 20 kg/m²). Nodule population is inversely proportional to the coverage of the sediment (10–100%) and its thickness (0 to > 10 cm), which causes differential burial (0–100%) of nodules. Correlation between nodule parameters (diameter and coverage) in the photographs and grab recovery is used to evolve empirical relationships for estimating nodule abundance in different seabed settings. The rock outcrops (basalts) with a coverage of 6–100% are the sources of nuclei for the nodules, the distribution of which is controlled by the local topography. Higher concentrations of nodules are observed along the slopes, followed by the crests of seamounts, and are lowest in the valleys and plains. A population density of 6–7 benthic organisms per 100 m² belonging to 7 different phyla is observed, with a high frequency of lebensspuren (4–12 traces/m²) in association with nodules. Estimation of these parameters can be used as important inputs in the design of the nodule collector, as it will have to encounter a variety of seafloor conditions, such as patchy nodule distribution, rock outcrops, steep slopes, and frequent microtopographic changes, as well as benthic life. The distribution and relation of various features with one another can also be used to understand the possible impact of nodule mining on the seabed. Estimates show that for a yield of 3 million tonnes of nodules per year, the volume of sediment disturbed will be between 200 × 10⁷ and 500 × 10⁷ m³over an area of 300–600 km², depending upon the average abundance of nodules. Hence, the nodule collector will have to be a self‐propelled system, with photographic and acoustic sensors, to enable selective mining and avoid unfavorable areas.     

Gas seepage, pockmarks and mud volcanoes in the near shore of SW Taiwan

In order to understand gas hydrate related seafloor features in the near shore area off SW Taiwan, a deep-towed sidescan sonar and sub-bottom profiler survey was conducted in 2007. Three profiles of high-resolution sub-bottom profiler reveal the existence of five gas seeps (G96, GS1, GS2, GS3 and GS4) and one pockmark (PM) in the study area. Gas seeps and pockmark PM are shown in lines A and C, while no gas venting feature is observed along line B. This is the first time that a gas-hydrate related pockmark structure has been imaged off SW Taiwan. The relatively high backscatter intensity in our sidescan sonar images indicates the existence of authigenic carbonates or chemosynthetic communities on the seafloor. More than 2,000 seafloor photos obtained by a deep-towed camera (TowCam) system confirm the relatively high backscatter intensity of sidescan sonar images related to bacteria mats and authigenic carbonates formation at gas seep G96 and pockmark PM areas. Water column gas flares are observed in sidescan sonar images along lines A and C. Likewise, EK500 echo sounder images display the gas plumes above gas seep G96, pockmark PM and gas seep GS1; the gas plumes heights reach about 150, 100 and 20 m from seafloor, respectively. Based on multichannel seismic reflection (MCS) profiles, an anticline structure trending NNE-SSW is found beneath gas seep G96, pockmark PM and gas seep GS2. It implies that the gas venting features are related to the anticline structure. A thermal fluid may migrate from the anticline structure to the ridge crest, then rises up to the seafloor along faults or fissures. The seafloor characteristics indicate that the gas seep G96 area may be in a transitional stage from the first to second stage of a gas seep self-sealing process, while the pockmark PM area is from the second to final stage. In the pockmark PM area, gas venting is observed at eastern flank but not at the bottom while authigenic carbonates are present underneath the pockmark. It implies that the fluid migration pathways could have been clogged by carbonates at the bottom and the current pathway has shifted to the eastern flank of the pockmark during the gas seep self-sealing process.     

Regional Variability in Occurrence and Distribution of Polymetallic Nodules in the Central Indian Basin

Regional scale morphological studies on different-sized polymetallic nodules from the Central Indian Basin show that only 2–5 cm sized nodules have highest occurrence per station (92–94% along latitudes; 88–94% along longitudes). A nodule size shows an inverse relationship with the nodule distribution, grade, and abundance. Interestingly, only 3–4 and 4–5 cm sized nodules have highest grade, abundance, and distribution percentages along longitudes in P₁, first generation mine site and relinquished area, which further implies that the nodule mining along the longitude would be beneficial. Different-sized nodule groups suggest their formation under variable environmental conditions that existed in the Central Indian Basin. The coexistence of different-sized nodules suggests different environmental conditions existed in the Central Indian Basin.     

Seabed characterization through a range of high-resolution acoustic systems – a case study offshore Oman

This study uses three acoustic instruments (different in their operating frequencies, 13, 3.5, and 6–10 kHz, and deployment type, hull-mounted, surface-towed and deep-towed) to investigate and characterize the acoustic response of seafloor NE of Oman in a frequency-independent manner. High-resolution control was achieved by having selected areas of our acoustic transects ground-truthed by sampling and/or sea-floor photography. On the regional scale, the greatest degree of change in backscatter amplitude was correlated with major changes of seabed morphology and lithology. However, small-scale roughness had the biggest effect on amplitude on the local scale, i.e. within each area of specific seafloor type. The study also shows that seafloor reflection amplitude changes are far more easily detected by deep-towed instrument than by surface-towed or hull-mounted systems. Whilst there are significant changes in bioturbation types and density along the transects, the suite of instruments deployed was not able to pick up the effect of the bioturbation on acoustic signals.     

东太平洋CC区板块构造和多金属结核资源效应探讨

利用东太平洋CC区多波束海底地形测量、结核覆盖率深拖系统探测、结核丰度地质采样和地球物理地震勘探资料,运用板块构造和沉积动力学理论,并与丰度趋势面和神经网络分析结果对比,对东太平洋CC区构造与多金属结核资源效应关系进行了探讨,并认为:(1)富集在研究区约200亿t结核的最主要控制因素是东太平洋海隆、莱恩山脉、克拉里昂-克利伯顿大断裂(Clarion-Clipperton Fracture Zone),东、西、南、北的四个构造单元为结核大量富集起到了框架性的关键作用;(2)本区经历了和遵循着海底扩张的基本过程,这个过程对结核物质来源、成矿作用、结核分布有重大影响,结核丰度、覆盖率与地形变化非常一致,重大相变距离为10～15km,基底自形成以来一直影响着地表结核;(3)地球深部地质作用过程对结核成矿作用也有一定影响,影响因素可能涉及基底岩浆房及其大小等.     

Production key figures for planning the mining of manganese nodules

Under the impression of decreasing ore grades and increasing production costs in conventional mining, seafloor minerals came into focus. Having gained a basic understanding of geological settings, there is still a lack of tools to assess and plan future mining projects in the deep-sea. This paper contributes to a mining concept which is inspired by the high-tech farming industry: strip mining. Potential mining fields are identified using image filters in conjunction with hydroacoustic backscatter data and slope angles and are portioned into long, narrow strips. In the framework of the EU-funded Blue Mining project, these methods were applied to a part of the eastern German exploration area, located in the manganese nodule belt of the Clarion Clipperton Zone, Pacific Ocean. Both, the mapping technique and the mining concept presented in this paper can be used in early-stage feasibility studies to derive estimates on production key figures for seafloor manganese nodule mining.     

深拖系统光学图像多金属结核粒径和丰度的计算

针对Simrad深拖系统和上海交通大学与美国DOE联合研制的深拖系统,开发光学图像多金属结核覆盖率、粒径和丰度计算软件.提出了深拖系统光学图像拖体高度校正处理、粒径计算方法,分析了我国太平洋多金属结核矿区东、西区结核丰度与覆盖率和粒径的相关性,建立了深拖系统光学图像多金属结核丰度计算的数学模式.     

Manganese nodule distribution in different topographic domains of the Central Indian Basin

Manganese nodule distribution is primarily influenced by seafloor topography. Nodule distribution at 479 locations vis‐à‐vis seabed topography is studied by superimposing sampling location on the topographic profile and assigning appropriate domain (hilltop, valley, slope, or plain) for the sampling location. Highest mean abundance is observed at the valleys (6.94 kg /m²), followed by hilltops, slopes, and least on plains. Frequency distributions are regular (Gaussian) on plains, whereas on valleys and hilltops they are irregular (Rayleigh type). Fe and Co content is highest in nodules from hilltops and lowest in those from plains. Conversely, Mn, Cu, and Ni content is highest on plains and least on valleys. Fe: Mn and Co: Mn are negatively correlated in all the domains. Mn and total metal content (Ni + Cu + Co) show direct relationship in all the domains. An inverse relation between nodule abundance and composition is found. Cluster analysis on chemical and abundance data shows two distinct groups in all domains. Abundance and Fe and Co content typically form one group, while all other elements form another group. Genesis of nodules depends on the availability of supply of transition elements to the abyssal environment, maintenance of nodules in the sediment‐water interface, and sedimentation rates.     

Fe−Mn nodule field indicated by GLORIA,north of the Puerto Rico Trench

A 2,500-km² area of sea floor on the south-eastern flank of the Greater Antilles Outer Ridge north of the Puerto Rico Trench displays anomalously high acoustic backscattering properties on GLORIA longrange sidescan-sonar data. Previously collected dredges, bottom photographs, and sediment cores indicate the presence of Fe–Mn nodules within the area of high backscatter. We were able to map the extent of the inferred nodule field on the basis of acoustic property contrast between the nodule-covered sediment and the surrounding nodule-free sediment.     

Last glacial emplacement of methane-derived authigenic carbonates in the Sea of Japan constrained by diatom assemblage,carbon-14, and carbonate content

We studied diatom assemblages and CaCO₃ contents of methane-derived authigenic carbonates from the eastern margin of the Sea of Japan and assessed the formation time of these samples. Radioactive ¹⁴C date was determined in selected samples to obtain the maximum age of the time. The results of our study suggest mass formation of carbonate nodules in a glacial period within ∼40 ky, consistent with a published U/Th dating result of carbonate nodules in the study area. Diatom assemblages and contents in the carbonate nodules (abundance of ∼10⁶/g, dominance of neritic-littoral species, warm/cold water species ratio lower than ∼25) differ from the near-seafloor sediments in the study area, which have characteristics of Holocene sediments in the Sea of Japan, and suggest cementation of glacial sediments. Laminated sediments in some nodule samples are glacial sediments because laminations are records of a low sea level period in the semi-enclosed ocean. Similarity of diatom assemblages and contents in all carbonate samples is another evidence of glacial sediments in nodules. Glacial sediments with oceanic cold water species as low as Holocene sediments restricts the sediment age to before 20 cal. ky BP. Carbonate contents higher than 78 wt% suggest the cementation of poorly compacted sediments near the seafloor, and the date of carbonate cementation is, therefore, close to that of the cemented sediments. Most carbonate nodule samples in this study were formed in a glacial period and detection of ¹⁴C restricts this period to within ∼40 ky.     

东太平洋多金属结核中铁、锰元素的分形演化及其意义

运用分形理论,通过建立不同的相空间,计算了东太平洋多金属结核中的铁、锰元素的时间序列在各相空间中的关联分维,并与其在沉积物岩心中的关联分维进行了对比.通过研究发现,多金属结核中铁、锰元素和沉积物中Fe₂O₃及MnO在分形演化过程中均存在分维吸引子,认为沉积物中的Fe₂O₃和MnO可以用3个变量来描述,它们可能代表了火山、生物和陆地的三种来源,而描述结核中的铁、锰元素却需要14个变量,反映多金属结核中铁、锰元素的来源和/或赋存非常复杂,至少有14个因素在起作用,可能暗示了结核在形成过程中存在复杂的生物化学作用,为多金属结核的生物成因提供了间接的数学证据,同时也合理解释了结核生长结构所具有的自相似韵律现象.