Morphological analysis of the drainage system in the Eastern Alps

We study the morphology of the major rivers draining the Eastern Alps to test whether the active tectonics of this part of the orogen is reflected in the shape of channel profiles of the river network. In our approach we compare channel profiles measured from digital elevation models with numerically modelled channel profiles using a stream power approach. It is shown that regions of high stream power coincide largely with regions of highest topography and largest uplift rates, while the forelands and the Pannonian Basin are characterised by a significantly lower stream power. From stream power modelling we conclude that there is young uplift at the very east of the Eastern Alps, in the Bohemian Massif and in the Pohorje Range. The impact of the Pleistocene glaciations is explored by comparing properties of rivers that drain in proximal and distal positions relative to the ice sheet during the last glacial maximum. Our analysis shows that most knick points, wind gaps and other non-equilibrium features of catchments covered by ice during the last glaciations (Salzach, Enns) can be correlated with glacial processes. In contrast the ice free catchments of the Mur and Drava are characterized by channels in morphological equilibrium at the first approximation and are showing only weak evidence of the strong tectonic activity within these catchments. Finally, the channel profiles of the Adige and the divide between the upper Rhine and Danube catchments differ significantly from the other catchments. We relate this to the fact that the Adige and the Rhine respond to different base levels from the remainder of the Eastern Alps: The Adige may preserve a record from the Messininan base level change and the Rhine is subject to the base level lowering in the Rhine Graben.     

Preparing a seismic hazard model for Switzerland: the view from PEGASOS Expert Group 3 (EG1c)

The seismic hazard model used in the PEGASOS project for assessing earth-quake hazard at four NPP sites was a composite of four sub-models, each produced by a team of three experts. In this paper, one of these models is described in detail by the authors. A criticism sometimes levelled at probabilistic seismic hazard studies is that the process by which seismic source zones are arrived at is obscure, subjective and inconsistent. Here, we attempt to recount the stages by which the model evolved, and the decisions made along the way. In particular, a macro-to-micro approach was used, in which three main stages can be described. The first was the characterisation of the overall kinematic model, the “big picture” of regional seismogenesis. Secondly, this was refined to a more detailed seismotectonic model. Lastly, this was used as the basis of individual sources, for which parameters can be assessed. Some basic questions had also to be answered about aspects of the approach to modelling to be used: for instance, is spatial smoothing an appropriate tool to apply? Should individual fault sources be modelled in an intraplate environment? Also, the extent to which alternative modelling decisions should be expressed in a logic tree structure has to be considered.     

New gravity maps of the Eastern Alps and significance for the crustal structures

The deep seismic profile Transalp crosses, from north to south, Germany, Austria and Italy. The gravity measurements for each country were made by national agencies with different reference systems and data reduction methods. Within the frame of the Transalp-project a comprehensive database of the Eastern Alps was compiled covering an area of 3.5° by 4° in longitude and latitude (275 by 445 km), respectively. To increase the data coverage in the south Alpine area two gravity surveys were carried out, resulting in 469 areally distributed new stations, of which 215 have been measured with the intent to improve the geoid in the area of the planned Brenner Basistunnel (BBT). The resulting gravity database is the best in terms of resolution and data quality presently available for the Eastern Alps. Here the free air, Bouguer and isostatic gravity fields are critically discussed. The spatial density of existing gravity stations in the three countries is discussed. On the Italian side of the Alps the spatial density is rather sparse compared to the Austrian side. The Bouguer-gravity field varies between − 190 * 10^− 5 m/s² and + 25 * 10^− 5 m/s², with the minimum located along the Alpine high topographic chain, but with a small offset (a few tens of km) to the greatest topographic elevation, showing that the Airy-type local isostatic equilibrium does not fully apply here. The maximum of the Bouguer anomaly has an elongated shape of 100 by 50 km located between the towns of Verona and Vicenza and covers the Venetian Tertiary Volcanic Province (VTVP), a feature not directly related to the plate collision in the Eastern Alps. The gravity high is only partly explainable by high-density magmatic rocks and requires also a deeper source, like a shallowing of the Moho. The isostatic residual anomalies (Airy model) are in the range ± 50 * 10^− 5 m/s², with the greatest positive anomaly corresponding to the location of the VTVP, indicating here under-compensation of masses. At last a discussion of a 2D density model based on reflection seismic data and receiver functions is made.     

Complex Growth Textures in a Polymetamorphic Metabasite from the Kraubath Massif (Eastern Alps)

Zoned garnet and amphibole occur in metabasites of the KraubathMassif, Eastern Alps, that contain relic magmatic clinopyroxene.The amphibole composition gradually changes from core (X_Mg =0·83) to rim (X_Mg = 0·6–0·7). A numberof compositional varieties of garnet occur in the metabasite.An older porphyroblastic garnet (Py_23–27, Alm_41–43,Grs_29–33) has two different compositional domains, onerelatively rich in Mg (Py_27–30) and the other rich inCa (Grs_35–38) with a low Mg (Py_20–25) content. Theyoungest variety, which forms rims on, or microveins in, theporphyroblastic garnet, has high Ca and low Mg (Grs_40–57,Py_2–7, Alm_46–51). The amphibole cores and garnetporphyroblasts are interpreted to represent minerals formedduring Variscan regional metamorphism under amphibolite-faciesconditions. Alpine metamorphism is represented by the most recentCa-rich and Mg-poor variety of garnet that coexists with theamphibole rims, epidote and chlorite. Fracturing in the porphyroblasticgarnet probably originated during retrogression of the Variscanamphibolite-facies assemblages. Textural relations suggest thatthe garnet in the microveins formed by dehydration of hydrousphases during an Alpine metamorphic overprint that reached P–Tconditions of 550–583°C at 1·0 GPa. KEY WORDS: microveins; garnet; metabasites; Kraubath Massif; Eastern Alps     

Tectonometamorphic evolution of the Koralm Complex (Eastern Alps): constraints from microstructures and textures of the ‘Plattengneis’ shear zone

Lattice preferred orientations (LPO) of quartz have been investigated along a south–north oriented section across the Plattengneis of the Koralm Complex (Eastern Alps). The Plattengneis forms an important shear zone within the Austroalpine nappe complex of the Eastern Alps, which has developed during the Cretaceous evolution of the Alpine orogen. The quartz c-axes form small circle distributions in the southernmost parts of the Koralm Complex, which represent the uppermost structural level of the Plattengneis. Further to the North two maxima between the Y and Z directions of the finite strain can be interpreted in terms of preferred slip on the rhomb planes. These fabrics continuously grade into (type I and type II crossed) girdle distributions in a northward direction. A strong maximum near the Y-axis with the tendency to be distributed along a single girdle, with three corresponding maxima of a-axes near the margin of the pole figure, can be observed in the central and northern parts. Such LPO are characteristic for both high grade metamorphic conditions and high finite strain. The microstructures display that the deformation within the Plattengneis shear zone was synmetamorphic. A continuous increase of peak temperatures (and pressure) from approximately 550 °C to approximately 750 °C from the South to the central parts can be inferred from geothermometric calculations. The temperatures then decrease to approximately 650 °C from the central parts to the North. The related pressures increase from 8 to 16 kbar, and then decrease to 10 kbar. The LPO changes that have been observed in the study area are best interpreted in terms of temperature dependence of the activation of glide systems within quartz aggregates. The temperature and pressure evolution may indicate that the central parts of the Koralm Complex have been exhumed by larger amounts than the northern and southern parts. This is also documented by the LPO evolution. Therefore, we assume that the Plattengneis shear zone formed during the exhumation of the Koralm Complex, and is related to the exhumation of high-pressure units in the footwall of this shear zone. Accordingly, the kinematics of the Plattengneis shear zone is rather extensional than thrust-related. The implications for the structural evolution of the Eastern Alps are shortly discussed.     

Chronology of the Last Glacial Maximum in the Salzach palaeoglacier area (Eastern Alps)

A chronostratigraphy based on luminescence data was established at a key loess profile (Duttendorf) in the northern alpine foreland of Austria. The data help to constrain the timing and duration of the Last Glacial Maximum (LGM) in the area of one of the largest east Alpine piedmont glaciers, the Salzach palaeoglacier. Climate deterioration and maximum advance of this glacier were coeval with the beginning of the main loess accumulation phase in the glacier forefield at ～29–30 ka. A late LGM‐outwash gravel layer deposited on top of the loess profile marks the end of the LGM glacier activity at ～20 ka. The geomorphological setting around the loess profile provides evidence of a major glacier oscillation during the course of the LGM, a phenomenon qualitatively known from other alpine palaeoglaciers but never interpreted in terms of palaeoclimate. A LGM glacier oscillation similar to that of the Salzach palaeoglacier was reported recently from the south Alpine Tagliamento palaeoglacier, suggesting a common forcing. The onset of loess deposition at Duttendorf and the tentatively contemporal advance of the Salzach palaeoglacier reflect, as do other data, the drastic cooling in Europe as a result of Heinrich event 3. The first glacier maximum is not well constrained in the study area but a correlation with the better dated Tagliamento amphitheatre suggests a possible response to Heinrich 2. The second re‐advance occurred synchronously (within dating uncertainties) in both palaeoglaciers forefields (at ～21 ka) but the forcing mechanism remains unknown. Copyright © 2011 John Wiley & Sons, Ltd.     

Kinematics and geochronology of Early Cretaceous thrusting in the northwestern paleozoic of Graz (Eastern Alps)

Abstract

The multiply deformed Upper Austro-Alpine nappe pile of the Graz area is built up of low-grade metamorphosed Paleozoic rocks which are discordantly overlain by sediments of Santonian (Late Cretaceous) age (“Gosau” formation). Slices of Permo-Mesozoic rocks are absent. Analyses of structures, microfabrics, strain and shear directions were used to decipher the kinematic history; geochronological investigations to date the age of thrusting. K/Ar and Rb/Sr ages of synkinematically grown mica suggest an eo-Alpine (Early Cretaceous) age for the major deformation D1. D1 is characterized by non-coaxial rock flow which caused SW- to W directed nappe imbrication. Incremental strain measurements indicate the progressive superposition of D2 over Dl. In the higher nappe (Rannach Nappe) nappe imbrication continued during D2 changing the direction of nappe transport from SW to NW. Enhanced flattening strain in the deeper nappe (Schöckel Nappe) led to recumbent folds in all scales during D2. This study emphasized two interpretations : (1) The Alpine deformation in the Upper Austro-Alpine nappe pile of the Paleozoic of Graz started in the Earliest Cretaceous (about 125 Ma.). (2) The emplacement of nappes followed a curved translation path in the studied area.     

Caledonian high-pressure metamorphism in the Strona-Ceneri Zone (Southern Alps of southern Switzerland and northern Italy)

The Strona-Ceneri Zone comprises a succession of polymetamorphic, pre-Alpidic basement rocks including ortho- and paragneisses, metasedimentary schists, amphibolites, and eclogites. The rock pile represents a Late Proterozoic or Palaeozoic subduction accretion complex that was intruded by Ordovician granitoids. Eclogites, which occur as lenses within the ortho-paragneiss succession and as xenoliths within the granitoids record a subduction related high-pressure event (D1) with peak metamorphic conditions of 710 ± 30 °C at 21.0 ± 2.5 kbar. After isothermal uplift, the eclogites experienced a Barrowtype (D2) tectonometamorphic overprint under amphibolite facies conditions (570-630 °C, 7-9 kbar). U-Pb dating on zircon of the eclogites gives a metamorphic age of 457 ± 5 Ma, and syn-eclogite facies rutile gives a ²⁰⁶Pb/²³⁸U age of 443 ± 19 Ma classifying the subduction as a Caledonian event. These data show that the main tectonometamorphic evolution of the Strona-Ceneri Zone most probably took place in a convergent margin scenario, in which accretion, eclogitization of MOR-basalt, polyphase (D1 and D2) deformation, anatexis and magmatism all occurred during the Ordovician. Caledonian high-pressure metamorphism, subsequent magmatism and Barrow-type metamorphism are believed to be related to subduction and collision within the northern margin of Gondwana. Editorial handling: Edwin Gnos     

Out-of-sequence thrusts and paleogeography of the Rhenodanubian Flysch Belt (Eastern Alps) revisited

The Oberstdorf nappe of the Western and the Laab nappe of the Eastern Rhenodanubian Flysch (ERF) were independently identified as out-of-sequence thrust units by facies studies (Mattern 1999) and zircon analyses (Trautwein et al. 2001a, b, c), respectively. A new look at both areas reveals mutual similarities and new evidence for the out-of-sequence concept. Paleocurrent and heavy mineral data make it possible to reconstruct the sediment influx directions. From the Barremian to the mid-Campanian, the western and eastern basin segments were fed with south-derived garnet and north-derived zircon/”ZTR” (i.e., zircon, tourmaline, and rutile). Because both out-of-sequence units are relatively rich in zircon/ZTR they must have occupied the northernmost basin position. In the Western Rhenodanubian Flysch segment, the Sigiswang nappe occupied the central and the Üntschen nappe the southernmost basin position. In the ERF segment the central basin is represented by the Greifenstein nappe and the southernmost basin by the Kahlenberg nappe. Both out-of-sequence units do not occur in the northernmost and tectonically lowest position in their respective nappe piles as they were thrust over the other nappes. The reconstructed basin positions of the thrust units are suggested by the observation of a gradient in heavy mineral content in the thrust units. This paleogeographic arrangement is least problematic and renders models with differently positioned thrust units, requiring debris-shedding intrabasinal ridges, as unnecessarily complicated. Instead, we suggest that gradual changes in heavy mineral composition existed in across-basin direction. Garnet may stem from the Central Gneiss Complex of the Tauern window and formerly exposed lateral equivalents, all representing the southern Mid-Penninic zone. We assign the Falknis/Tasna nappe and formerly exposed lateral equivalents to the northern Mid-Penninic zone which served as the zircon/ZTR source. Interpreting Ebbing’s (Ph.D. thesis, Freie Universität Berlin, pp 1-143, 2002; Fig. 6.10) density section, we suggest that Mid-Penninic crust exists beneath the Central Gneiss Complex. During the latest Cretaceous much garnet was also N-derived. This may reflect processes related to the consumption of the North Penninic basin.     

The P-T-d development at the basement-cover boundary in the north-eastern Tauern Window (Eastern Alps): Alpine continental collision

Abstract At the basement-cover boundary of the north-eastern Tauern Window (Eastern Alps), the following Alpine P-T-d development has been reconstructed on the basis of macro- and micro-structures as well as preferred crystallographic orientations, mineral parageneses and compositions.
During increasing P-T conditions in the greenschist facies a first period of deformation produced imbrication of the basement gneisses and cover sediments, and then monoclinal folds up to the kilometre scale. Tectonic transport was continuously top-to-the-ENE. A second period of deformation began at about peak P-T conditions of 9 kbar and c. 540–560°C in the south, and about 7–9 kbar and 490–500° C in the north; this continued locally to lower temperature. During the second period, transport was continuously top-to-the-SE. Crystallographic orientations of white mica and plagioclase give particularly useful information on the kinematic framework. In addition, data on the ductile behaviour of dolomite and plagioclase can be inferred. At c. 7–9 kbar, dolomite recrystallization starts at 450–480° C, and the beginning of plagioclase recrystallization coincides with the oligoclase boundary.
In general, the Alpine geodynamic history of the basement-cover boundary may be related to continental collision processes between a northerly plate (European or Briançonnais) and a southerly (Adriatic) one. The first deformation period possibly reflects subduction of the gneiss-sediment boundary toward the WSW, to a depth of 31–32 km. The second period may be a result of obduction toward the NW, followed by late-stage uplift. Most of the basement domes of the eastern Tauern Window appear as a result of the final stage of the first deformation, formed prior to the peak of metamorphism, possibly partly influenced by the final collision between the northern and the southern continents.     

Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.     

Quantification of strain rate in the Western Alps using geodesy: comparisons with seismotectonics

The contrasted seismotectonic regime of the Western Alps is characterized by radial extension in the high chain, combined with local compressive areas at the foothill of the belt, and everywhere occurrence of transcurrent tectonics. Here, we compare this seismotectonic regime to a large-scale compilation of GPS measurements in the Western Alpine realm. Our analysis is based on the raw GPS database, which give the measured velocity field with respect to the so called “stable Europe”, and an interpolated velocity field, in order to smooth the database on a more regular mesh. Both strain rate and rotational components of the deformation are investigated. The strain rate field shows patch-like structure, with extensional areas located in the core and to the North of the belt and compressional areas located in its periphery. Although the GPS deformation fields (both raw and interpolated) are more spatially variable than the seismotectonic field, a good qualitative correlation is established with the seismotectonic regionalization of the deformation. The rotation rate fields (both raw and interpolated) present counterclockwise rotations in the innermost part of the belt and a surprising continuous zone of clockwise rotations following the arc-shape geometry of the Western Alps along their external border. We interpret this new result in term of a counterclockwise rotation of the Apulia plate with respect to the stable Europe. This tectonic scheme may induce clockwise rotations of crustal block along the large strike-slip fault system, which runs in the outer part of the belt, from the Rhône-Simplon fault to the Belledonne fault and Southeastward, to the High-Durance and Argentera fault.     

Crystallization and very rapid exhumation of the youngest Alpine eclogites (Tauern Window,Eastern Alps) from Rb/Sr mineral assemblage analysis

Multimineral Rb/Sr internal isochrons from eclogite facies rocks of the Eclogite Zone (Tauern Window, Eastern Alps) consistently yield an Early Oligocene age of 31.5±0.7 Ma. This age has been obtained both for late-prograde, dehydration-related eclogitic veins, and for rocks variably deformed and recrystallized under eclogite facies conditions (2.0–2.5 GPa, 600°C). Initial Sr-isotopic equilibria among all phases indicate absence of significant post-eclogitic isotope redistribution processes, therefore the ages date eclogite facies assemblage crystallization. Equilibria also prove that no prolonged pre-eclogite facies history is recorded in the rocks. Instead, subduction, prograde mineral reactions, and eclogitization proceeded rapidly. Fast exhumation immediately after eclogitization, with minimum rates >36 mm/a is inferred from a 31.5±0.5 Ma internal mineral isochron age of a post-eclogitic greenschist facies vein assemblage. Such rates equal typical subduction rates. Late Eocene to Early Oligocene subduction of the European continental margin, with subsequent rapid exhumation of high-pressure nappe complexes has previously been recognized only in the Western Alps. The new data signify synchronous continental collision all along the Alpine belt. Our results demonstrate the unique potential of Rb/Sr assemblage system analysis for precise dating of both eclogite facies and post-eclogitic events, thus for precisely constraining exhumation rates of deep-seated rocks, and for straightforward linkage of petrologic evidence with isotopic ages.     

The Neogene Fohnsdorf Basin: basin formation and basin inversion during lateral extrusion in the Eastern Alps (Austria)

The evolution of the early/middle Miocene Fohnsdorf Basin has been studied using borehole data, reflection seismic lines, and vitrinite reflectance. The basin is located along the sinistral Mur-Mürz fault system and probably formed as an asymmetric pull-apart basin, which was subsequently modified by halfgraben tectonics, as a consequence of eastward lateral extrusion. Sedimentation started with the deposition of fluvio-deltaic sediments. Thick coal accumulated in the northwestern basin. Thereafter subsidence rates increased dramatically with the formation of a lake several hundred meters deep. The lake was filled mainly from the north with more than 1500?m of sediments showing a coarsening-upward trend due to southward prograding deltaic lobes. A sequence of more than 1000?m of boulder gravels (Blockschotter) in the southeastern part of the basin are interpreted as the upper part of a coarse-grained fan delta succession, which accumulated along a normal fault along the southern basin margin. Fan deltas reached the central basin only during the early stages of sedimentation and during the late stages of basin formation. Miocene heat flow was approximately 65–70?mW/m², which is significantly lower than in other basins along the Mur-Mürz fault system. The present-day southwestern basin margin is a recent feature, which is related to transpression along the dextral Pöls-Lavanttal fault system. It is formed by reverse faults constituting the northeastern part of a flower structure. Miocene sediments in the Feeberg valley are preserved along its southwestern part. Uplift of the central part of the flower structure was at least 2.4?km. North–south compression resulted in the deformation of the basin fill, uplift of the E/W-trending basement ridge separating the Fohnsdorf and Seckau basins, and in the erosion of 1750?m of sediments along the northern basin margin.     

The crustal structure of the Eastern Alps from a combination of 3D gravity modelling and isostatic investigations

The transition between European and Adriatic crust is an important feature related to the plate collision that formed the European Alps. The diversity of seismic and geological information allows the construction of two alternative 3D density models, which both match the observed gravity field. Different seismic experiments suggest a thickness for the Adriatic crust between 30 and 40 km. The thick crust model requires an unusually dense lower crust (>3050 kg/m³) to reproduce the observed Bouguer anomaly. To evaluate the two alternative models, the isostatic implications of the geometry and density distribution within both 3D models are investigated, using local (Airy) and regional (Vening Meinesz) isostasy.Airy isostatic investigations show that the Eastern Alps are not isostatically compensated and the residuals correlate strongly with exposed geological formations. Subsequently, subsurface loading is an important factor controlling isostatic processes. The different geometry and densities in the two 3D models imply different loading at the crust–mantle boundary. The subsurface loads calculated from the 3D density models were used to estimate regional isostasy by a convolution method. In general, small rigidity values (D<10×10²¹ Nm) are determined for the Eastern Alpine lithosphere. In the model with a 40-km-thick Adriatic crust, high flexural rigidities are inferred for the Adriatic plate (>100×10²¹ Nm), but these values are unusual for an active orogenic region. The results point to the interfingering of European and Adriatic crust that results in the squeezing of European crust between Adriatic crust and mantle with additional contamination by mantle material.