汶川震区暴雨泥石流危险范围预测研究

汶川地震发生后,灾区暴雨泥石流活动进入一个新的活跃期。根据对北川震区2008年9月24日暴雨泥石流调查,泥石流流域中地震诱发大量滑坡导致松散物源巨大,泥石流过程的洪峰流量比通常的要大数倍,应用以往泥石流危险范围预测模型进行计算的结果与实际的误差较大。因此,需要建立适用于强震区的泥石流危险范围预测方法。本文以9.24北川暴雨泥石流为典型实例,结合野外调查,利用震后高分辨航空图像和9.24暴雨后SPOT5图像分别提取泥石流发生前流域中滑坡物源储量及发生后形成的堆积扇特征数据,应用多元回归方法建立了汶川震区泥石流危险范围预测模型,该方法可用于估算泥石流最大堆积距离和堆积宽度。验证和应用结果表明:该模型适用于强震区泥石流危险范围的预测,模型方法可为震区重建中安全地段选择和未来地震区风险管理提供重要依据。     

On the applicability of satellite SAR interferometry to landslide hazards detection in hilly areas: a case study of Shuicheng,Guizhou in Southwest China

Landslides - SAR Interferometry (InSAR) has been proven to be effective for measuring landslides deformation. However, the InSAR application of landslide mapping is limited by the blind observation...     

滑坡灾害InSAR应急排查技术方法研究

研究探索了一条以InSAR变形为主,辅助光学遥感、地貌和地质条件特征,进行活动性滑坡快速排查的技术方法,并以四川省雷波县域为例进行了实验。应用4种SAR数据（PALSAR-1升轨、Sentinel-1 A/B升、降轨和PALSAR-2降轨数据）进行合成孔径雷达干涉（Interferometric Synthetic Aperture Radar,InSAR）处理,共解译活动性地质灾害163处,并分析了其时空分布规律,获得了几点认识:（1）InSAR技术能够追溯滑坡长期微小变形,从而实现活动性滑坡的有效识别;（2）多时段、多角度和多分辨率SAR数据的综合使用,可以有效克服滑坡观测的阴影叠掩、失相干等问题,提高滑坡（尤其是高位滑坡）识别的效果、效率和时效性;（3）与地面调查结果比较,InSAR识别的滑坡更全面、规模更准确,对高位滑坡和集中分布滑坡识别更有效,可以作为现今地质灾害排查的重要手段之一;（4）雷波县地质灾害主要分布在金沙江及美姑河沿岸,北向坡和30°~40°坡度是地质灾害高发区,除寒武系、奥陶—志留系地层发生地质灾害比例较高,其它各地层总体分布较均一。      

利用InSAR技术研究黄土地区滑坡分布

InSAR技术能够获取大面积、连续、高精度的地表垂直形变信息,可用来监测地震、火山、滑坡等自然灾害造成的地表形变。文章介绍了InSAR技术在监测陕北黄土地区滑坡中的应用,首先进行野外地质勘察和TM光学遥感影像解译,接着通过EnviSat SAR数据差分干涉处理,获取研究区干涉形变场,提取出滑坡位移量,最后详细分析黄草湾至董家寺沿线一带的滑坡变形范围,并划定出了4个有一定变形的重点监视区。     

甘肃通渭黄土滑坡二维形变时序监测

时间序列合成孔径雷达干涉测量技术能有效反应滑坡形变过程。2019年9月14日,甘肃省通渭县发生山体滑坡,但该滑坡灾前是否已经发生缓慢形变以及滑坡原因值得追溯和探讨。文中基于欧洲航天局发布的哨兵一号升/降轨数据,利用SBAS-InSAR技术分析甘肃通渭滑坡灾前二维形变特征以及滑动的因素。结果表明,2018年9月—2019年9月此滑坡存在连续形变,且随时间推移形变量不断增大,因此该滑坡为非突发型事件。在滑坡发生前,垂直向与东西向上最大累计形变量分别达18.25 mm和32.85 mm。基于二维时间序列结果进行距离分析与降雨量对比分析,显示苦水河与降雨量是该滑坡发生的两大诱因。该InSAR追溯结果进一步验证了星载雷达干涉测量技术在滑坡探测方面的应用潜力,是滑坡灾前识别、预警、防灾等减灾工作的有力工具。     

A prototype experiment of debris flow control with energy dissipation structures

Large-volume debris flow events are defined when the volume of solid materials exceeds 1 million m³. Traditional engineering measures, such as check dams, diversion channels, and flumes, are effective for normal debris flow control but are not sufficient to control large-volume debris flows. Experiments were conducted with an artificial step-pool system on the new Wenjiagou Gully to mitigate large-volume debris flows. The old Wenjiagou Gully was buried by 81.6 million m³ of loose solid material created by a landslide that was triggered by the Wenchuan earthquake on May 12, 2008. The new gully was formed during the scouring process caused by debris flows in 2008. Large-volume debris flows were initiated by rainstorm flood with high kinetic energy. The artificial step-pool system was constructed with huge and big boulders on the new Wenjiagou Gully in 2009. The step-pool system dissipated flow energy in steps and hydraulic jumps. Analysis proved that the step-pool system dissipated two-third of the kinetic energy of flow; thus, the critical discharge for triggering debris flow increased threefold. Due to the step-pool system maximized the flow resistance and protected the bed sediment and banks from erosion, the rainstorm floods in 2009 did not trigger debris flows. In 2010, the step-pool system was replaced with 20 check dams. Huge boulders were broken into small pieces of diameter less than 0.5 m and were used as building materials for the 20 dams. Without the protection of the step-pool system, a rainstorm flood scoured the base of the dams and caused failures for all of the 20 check dams in August 2010. The flow incised the gully bed by 50 m. The loose bank materials slid into the flow mixed with water and formed a large-volume debris flow with a volume of 4.5 million m³. Many houses were buried by the debris flow, and 12 people were killed. Comparison of the two strategies proved that energy dissipation structures are necessary for controlling large-volume debris flows. Check dams, if they are stable, may reduce the potential of bank failures and control debris flows. The step-pool system dissipates flow energy and control gully bed incision and bank failure. A combination of check dams and step-pool systems may be the most effective for mitigating debris flows.     

The Stogovce landslide in SW Slovenia triggered during the September 2010 extreme rainfall event

From September 16 to September 20, 2010, a cold weather front went across Slovenia. A heavy 4-day rainfall totaling between 300 and 520 mm caused large floods and triggered numerous rainfall-induced landslides. The damage due to the floods and landslides is estimated over 250 million Euros. One of the largest landslides covering the area of approximately 15 ha was triggered on flysch bedrock, just below a limestone overthrust zone. The sliding material properties, the inclinations of the slope, and the water catchment area indicate that the landslide may transform into a fast moving debris flow. The necessary protective measures were taken to protect inhabitants and the infrastructure against the disaster. The Stogovce landslide is one of the numerous rainfall-induced landslides that have occurred in Slovenia on flysch bedrock in the last 10 years. It proves that landslide risk on flysch territory is increasing. Special program of monitoring and protective measures will have to be developed in near future to protect densely populated areas against landslides as a consequence of weather extremes.     

5.12震源区牛眠沟暴雨滑坡泥石流预测模型

牛眠沟研究区位于2008-05-12汶川大地震线性震源的南端,受强烈地震力作用,区内山体遭受严重破坏,发生多处滑坡和泥石流灾害。根据已建立的暴雨滑坡、泥石流预测概念模型,暴雨滑坡、泥石流预测可视为判断滑坡形成的地质环境和确定触发滑坡的降雨特征。查明研究区地质环境及灾害特征,确定了产生滑坡、泥石流的必要地质环境因子,以数字滑坡技术获取这些因子数据,代入模型,即可评价研究区各处、各沟谷发生滑坡、泥石流的危险程度;与相似地质环境及气候条件进行类比,确定研究区触发滑坡、泥石流的降雨特征及降雨量阈值后,最终建立暴雨滑坡、泥石流预测模型。据此模型进行研究区暴雨滑坡、泥石流预测,实地验证表明滑坡、泥石流发生位置的准确率>90%。     

藏东冻土区滑坡形变时序InSAR监测分析

受气候暖湿化和冻融作用的影响,近年来西藏东部地区的山体滑坡多发频发,对人民生命财产安全造成严重威胁,制约了当地经济社会发展,因此,迫切需要利用有效手段对滑坡灾害隐患开展大范围调查与早期识别。以藏东317国道矮拉山地区为例,利用小基线集时序InSAR（Interferometric Synthetic Aperture Radar）技术,分别对2017年3月—2019年7月期间Sentinel-1A SAR升、降轨数据集进行地表形变监测分析,获取了该地区滑坡体隐患的分布情况,并讨论了滑坡历史形变演化特征及成因。结果表明：大部分区域较为稳定,滑坡隐患主要集中在山谷两侧,升降轨InSAR提高了滑坡监测识别的准确性和覆盖度;冻融滑坡形变过程与降雨型滑坡存在差异,呈现平稳期和失稳期交替出现的季节性变化特征;形变过程主要受冻融和降雨影响,两者共同作用加速坡体变形。实验结果验证了InSAR技术能够有效弥补传统监测手段的不足,可在高山冻土区滑坡隐患早期识别与监测防治中发挥重要作用。     

基于SBAS InSAR的鲜水河断裂带蠕滑型滑坡特征研究

鲜水河断裂带是青藏高原东部川滇地块的一条重要边界断裂,全新世以来活动强烈,断裂带沿线岩土体结构破碎强烈,在断裂活动诱发地震、断裂蠕滑和强降雨等因素作用下,断裂带沿线滑坡、泥石流等地质灾害发育密度大,危害严重。在前人研究的基础上,采用短基线集(SBAS InSAR)的方法,基于日本对地观测卫星(ALOS 1)所获得的2007—2011年期间15景PALSAR数据,对鲜水河断裂带道孚至炉霍段的活动速率进行分析计算,获取了该段断裂带内蠕滑型滑坡5年间的时间序列形变特征。研究结果表明：鲜水河断裂带道孚至炉霍段近年来以蠕滑滑动为主,蠕滑速率为(94±078) mm/a,断裂的蠕滑作用对区域构造应力场和断裂带内滑坡具有重要的控制作用,表现为距离鲜水河断裂带越近,影像间相干性越强,稳定的相干点越多,干涉效果越好,滑坡滑动累计位移越大。沿鲜水河断裂道孚至炉霍段,共识别出98个蠕滑型滑坡,沿鲜水河断裂带两侧呈线性展布,并分析了典型蠕滑型滑坡的地表形变特征。基于SBAS InSAR的雷达数据处理方法,可以有效地分析地表的缓慢变形以及区域性蠕滑型滑坡的发育发展变化规律,研究结果对于鲜水河断裂带沿线防灾减灾及类似构造活动地区的地质灾害研究具有一定的指导作用。     

汶川地震区文家沟泥石流成因模式分析

文家沟2008～2010年期间8次泥石流事件是在地震滑坡堆积体上因持续强降雨渗透变形溃决和后续侵蚀产生的,不同于一般的沟谷型和坡面型泥石流。文家沟滑坡堆积体上新生的泥石流沟共冲出松散固体物质总体积约180×104m3,2010年的"8.13"泥石流事件是其中规模最大的一次,冲出的松散固体物质体积约在115×104m3。文家沟泥石流的成因模式是,强降雨过程在滑坡堆积体上先期出现"渗流管涌、暂态壅水、溃决滑塌"的造沟作用模式,后期出现"溯源侵蚀、冲刷刨蚀、侧蚀坍塌、混合奔流(搅拌机)"的扩沟作用模式。2008年的"6.21"和2010年的"7.31"泥石流事件主要起因于前者,其他事件主要起因于后者。松散堆积体因排泄持续降雨入渗的能力不足而造成地下水滞留和水位升高是导致斜坡体稳定性降低的内在原因。当地下水壅高水位面达到水平时,堆积体内渗透动水压力达到最大,堆积斜坡的稳定性最低,成为堆积体表层发生滑塌溃决的临界条件。     

基于InSAR识别的黄土高原活动性地质灾害发育规律分析

地震、 降雨、 人类工程活动诱发的活动性地质灾害在黄土高原频现,但由于其地域广阔、 构造活跃、 地貌类型多样、 各地黄土特性差异较大,一直以来缺乏活动性地质灾害发育分布的系统认识.InSAR技术具有大范围观测地表变形的能力,文章利用2019年1月1日至2020年3月31日期间40期Sentinal-1 SAR数据,计算...     

福建南安市地质灾害特征及防治对策

根据福建省南安市地质灾害调查和区划工作成果，总结该区地质灾害类型主要有滑坡、崩塌和泥石流，尤以滑坡和崩塌的危害性最大。全市共发现地质灾害140处，其中滑坡72处(含土质滑坡67处)，崩塌65处(土质崩塌55处)，泥石流3处。南安市地质灾害具有分布广、规模小、突发性强、危害性大等特点，其控制因素：包括地形地貌、岩土体性质、降雨和人类工程活动等。南安市属于低山丘陵地貌，其中低山山地占全市面积的50％，丘陵、台地占25％；花岗岩、凝灰岩分布面积广，其残积层厚度较大，约5～17m，岩性为残积砾(砂)质粘性土，是致灾的主要土体。98％的地质灾害与降雨有直接的关系，当过程雨量达到100mm时，滑坡开始产生；过程雨量大于200mm时，滑坡普遍发生。直接与人类工程活动有关的地质灾害共134处，占地质灾害总数的95％，坡脚开挖是引发地质灾害的主要因素，占调查总数的84．4％。论文还提出了地质灾害防治的相应对策。     

基于InSAR和光学遥感的贵州鬃岭采煤滑坡识别与危险性评价

贵州鬃岭滑坡群具有孕灾规律性强、 发育集中密集、 威胁严重等特点.文章利用InSAR和光学遥感进行精细识别,获取了区域滑坡灾害信息,总结了鬃岭区域滑坡变形破坏模式,基于此建立了该地区的滑坡风险评价的体积-距离统计公式,并对典型灾害体进行了计算,获得了一些重要认识.地下采煤活动是引起鬃岭桌山边缘山体变形的主要原因;InS...     

基于小流域的地震扰动区降雨型滑坡泥石流危险性评价方法

地震扰动区存在大量震裂松散坡体,在持续或者密集的降雨条件下极易转化为滑坡灾害。同时,滑坡又会给泥石流提供大量松散固体物质,增加泥石流的危险性。因此,在震区,灾害通常以"链"的形式出现,比单一灾种危害性大。为了更有效地对地质灾害危险性进行评价,笔者将滑坡、泥石流作为灾害链,综合地加以分析和研究。选择5·12汶川大地震中受灾严重的都江堰市白沙河流域的17条泥石流沟作为研究区,建立滑坡-泥石流危险性评价耦合模型,研究24 h不同降雨量条件下小流域滑坡泥石流危险性的变化。耦合模型包括了坡体稳定性评价模型,水文模型及以泥石流规模、发生频率、流域面积、主沟长度、流域高差、切割密度、不稳定斜坡比为评价因子的泥石流危险性评价统计模型。研究结果表明:随着降雨量的增大,参与泥石流活动的松散物质方量持续增加,但当24 h降雨量超过200 mm后,泥石流沟的危险度等级不再发生变化;17条泥石流沟中4条为中危险度,12条为高危险度,1条为极高危险度。这说明研究区地质灾害问题相当严峻,在多雨季节存在泥石流群发的可能性,直接威胁到居住在泥石流沟附近的人民群众生命财产安全;因此,对于有直接危害对象的高危险度及其以上的泥石流沟,应该按照高等级设防标准进行工程治理及发布预警报。同时也说明,将滑坡、泥石流作为灾害链研究具必要性和可行性。     

Transformation of dilative and contractive landslide debris into debris flows—An example from marin County, California

The severe rainstorm of January 3, 4 and 5, 1982, in the San Francisco Bay area, California, produced numerous landslides, many of which transformed into damaging debris flows. The process of transformation was studied in detail at one site where only part of a landslide mobilized into several episodes of debris flow. The focus of our investigation was to learn whether the landslide debris dilated or contracted during the transformation from slide to flow.

The landslide debris consisted of sandy colluvium that was separable into three soil horizons that occupied the axis of a small topographic swale. Failure involved the entire thickness of colluvium; however, over parts of the landslide, the soil A-horizon failed separately from the remainder of the colluvium.

Undisturbed samples were taken for density measurements from outside the landslide, from the failure zone and overlying material from the part of the landslide that did not mobilize into debris flows, and from the debris-flow deposits. The soil A-horizon was contractive and mobilized to flows in a process analogous to liquefaction of loose, granular soils during earthquakes. The soil B- and C-horizons were dilative and underwent 2 to 5% volumetric expansion during landslide movement that permitted mobilization of debris-flow episodes.

Several criteria can be used in the field to differentiate between contractive and dilative behavior including lag time between landsliding and mobilization of flow, episodic mobilization of flows, and partial or complete transformation of the landslide.     

Measuring displacements of the Thompson River valley landslides,south of Ashcroft,BC, Canada,using satellite InSAR

The Thompson River valley, south of Ashcroft in British Columbia, Canada, has experienced several landslides since the mid-1800s. The national railways that run along the valley cross a number of these landslides. All the landslides occur in glacial deposits, typically sliding on weak clay layers. Some have failed rapidly to very rapidly and are currently inactive or showing deformation rates from a few millimeters to centimeters per year. An evaluation of satellite InSAR (Interferometric Synthetic Aperture Radar) using RADARSAT-2 images between September 2013 and November 2015 provides new insight into landslide displacements in the Thompson River valley. This information enhances the ongoing hazard management of unstable terrain. This paper presents the comparison of the InSAR measurements with other instrumentation (GPS and ShapeAccelArrays? -SAA) installed at one moving landslide and then addresses the extent and magnitude of the slope movements observed. InSAR was found to provide similar displacement values to those measured otherwise. The stable location showed displacements of +/?1 mm with an average near zero during the whole monitoring period. Six areas of slope movement were identified within the study area, all within or adjacent to the footprints of past landslides. The average line of sight (LOS) displacement rates range between 11 and 39 mm/year. Most of the landslides exhibited seasonal variations in velocity that corresponds to changes in river elevation in the valley.     

September, 2012 landslide events in Okhimath, India—an assessment of landslide consequences using very high resolution satellite data

The Okhimath area in the Uttarakhand state of India witnessed a large-scale occurrence of landslides on 14 September 2012 due to intense rainfall. As per news reports, this event resulted in the death of 51 people and a significant loss of property. In this study, the damage assessment results of the Okhimath landslides derived from the analysis of very high resolution (VHR) images received from Cartosat-2, Resourcesat-2, Kompsat-2 and GeoEye-1 satellites are presented. These datasets were acquired through a coordinated effort of the Indian Space Research Organisation and International Charter Space and Major Disasters. A total of 126 buildings, 34.5 ha of agricultural land and 7.78 km of road were identified as damaged through the VHR satellite data analysis. Using a semi-automatic landslide detection technique, 473 landslides covering a 2.25-km² area were also identified. Villages such as Mangali, Chunni, Brahman Kholi, Semla, Paldwadi, Saari and Giriyagaon are found to be most affected due to this event. The damage is mainly attributed to rock slides which originated in the escarpment zone which later converted to debris flows by scouring the material along the run-out zone.     

Turbiditic,clay‐rich event beds in fjord‐marine deposits caused by landslides in emerging clay deposits – palaeoenvironmental interpretation and role for submarine mass‐wasting

Distinct, clay‐rich beds are common in fjord‐marine deposits in Trondheimsfjorden near the outlet of the Nidelva River. Their characteristic light‐grey colour makes the beds easily distinguishable from the surrounding brownish, bioturbated, muddy fjord sediments. The clay‐rich beds commonly display a clear stratification in clay, silt and very fine sand. The beds are interpreted as originating primarily from large quick‐clay landslides upstream along the Nidelva River. Such events resulted in a sudden increase in the supply of fines to the fjord from disintegrating landslide debris and heavily loaded effluent plumes, possibly favouring hyperpycnal flow. Typical beds can be divided into a clay‐rich lower section, reflecting an initial surge with high concentrations of suspended mud, and a sandier upper section reflecting pulses of higher energy. This development can be explained, for example, by a lowering in the supply of mud, an increasing activity of deltaic sediment gravity flows due to a higher availability of sandy sediments in the landslide‐affected river, and by flooding and/or breaching of landslide dams. The typical, stratified beds are interpreted as the result of one quick‐clay landslide, whereas exceptionally thick, less organized, stratified beds are possibly the result of several large and/or complex landslides. Radiocarbon dating of mollusc shells has helped to establish a chronology for major terrestrial landslides in the area. The frequency of landslides increases towards the end of the Holocene. This is explained by a progressively deeper incision of rivers during glacioisostatic rebound, possibly combined with a change to a wetter climate. The marine core record displays deformation structures and hiati representing submarine mass‐wasting events, and supports the evidence that the clay‐rich beds are weak layers in the fjord‐marine stratigraphy. The inherent weakness of these layers may be explained by their composition, immature texture, loose fabric and contrasting permeabilities in the deposits. Slide‐prone layers similar to the clay‐rich beds described here may be found in other comparable fjord‐marginal settings and are considered to be of importance for geohazard assessments.     

西藏樟木口岸震后滑坡灾害变形InSAR监测分析

位于中国和尼泊尔边境的西藏樟木口岸是国家一类陆路通商口岸,也是西藏最大的边贸中心口岸。2015年尼泊尔大地震之后,西藏樟木口岸因多次发生滑坡灾害,而导致口岸关闭。为了调查樟木口岸区域滑坡灾害的分布和变形情况及更好的服务于区域减灾防灾,利用InSAR技术对覆盖该区域的Sentinel-1A和ALOS-2两种卫星影像数据进行了处理,并通过分析视线向年均形变速率图,圈定了17处疑似滑坡,并对其中的5处典型滑坡进行时间序列形变特征分析,监测识别出的滑坡基本沿318国道所在一侧的波曲河左岸分布。InSAR调查结果表明受地震影响樟木地区的滑坡多分布在沿波曲河左岸的陡峭山体上,中尼公路迪斯岗至友谊桥段的古滑坡出现了局部复活的现象,同时樟木镇居民所在的城区也发育有扎美拉山危岩体崩塌滑坡灾害。