Neogene sediment deformations and tectonic features of northeastern Tunisia: evidence for paleoseismicity

The Neogene stratigraphic series is characterized by predominant clayey facies alternated by other sand layers. The outcrop and subsurface studies show varied and complex styles of deformations and lead to relate the structures to paleoseismic events. The seismicity of eastern onshore and offshore Tunisian margin follows the master fault corridors oriented globally N–S, E–W, and NW–SE that correspond to the bordering faults of grabens and syncline corridors and associated faulted drag fold structures oriented NE–SW. Epicenters of magnitudes between 3 and 5 are located along these border fault corridors. The Neogene strata record brittle structures, including numerous and deep faults and fractures with straight and high-angle dipping planes. The structuring of NE–SW en echelon folds and synclines inside and outside NW–SE and E–W right lateral and N–S and NE–SW left lateral tectonic corridors indicates the strike-slip type of bordering faults and their seismogenic nature. Wrench fault movements that induce mud and salt diapirs, mud volcanoes, and intrusive ascensions are related to seismic shocks. Seismic waves caused by activity along one, or most likely, several tectonic structures would have propagated throughout the Quaternary cover producing seismites. The similarity of deposits, structuring, and seismites between the Tunis-Bizerte to the North and Hammamet-Mahdia to the South accredits the hypothesis that the seismic episodes might have affected sedimentation patterns along the Sahalian large geographic area. The paleoseismic events in northeastern Tunisia might be related to tectonic fault reactivations through time. This hypothesis is consistent with the geomorphologic context of the study area, characterized by several morphostructural lineaments with strong control on the sediment distribution, as well as uplifted and subsiding terrains. The estimated magnitude of the seismic events and the great regional tectonically affected areas demonstrate that the northeastern Tunisia experienced stress through the last geological episodes of its evolution. This Neogene kinematic reconstruction highlights the neotectonic system inducing the actual seismicity on this margin. Therefore, there is a straight relationship between deepseated faults and seismicity.     

Structural framework of the Jaibaras Rift,Brazil, based on geophysical data

The Cambro-Ordovician Jaibaras Rift is a NE–SW trending elongated feature, controlled by the Transbrasiliano lineament, locally known as Sobral-Pedro II shear zone (SPIISZ). An integrated study of geophysical data (gammaspectrometry, magnetometry and gravimetry) was undertaken in the Jaibaras Rift area, between Ceará Central (CCD) and Médio Coreaú domains (MCD), northwest Borborema Province. Geophysical data were interpreted qualitatively and quantitatively in order to understand the tectono-magmatic relations and rift formation based on the main geophysical lineaments, source geometry and depth, and separation of geophysical domains. In addition, a 2D gravity model was generated. The results show a structural partition characterized by NE–SW lineaments and E–W inflexions, where CCD presents a relatively mild magnetic field, whilst the MCD field is more disturbed. The Jaibaras Rift is characterized by positive magnetic and gravity anomalies. The SPIISZ, which corresponds to the SE fault edge of the Jaibaras Rift, is marked by strong magnetic dipoles and strong gravity gradients in the profile, showing the deep character of the Transbrasiliano lineament in the region. The Café-Ipueiras fault, at the NW edge of the rift, is well marked in gravity profiles, but displays low contrast of the magnetic field. Interpretation of the gravimetric anomaly map allowed to recognizing the main NE–SW axis, with alternation of maxima and minima in MCD. A regional gravity gradient reveals significant lateral density variation between the MCD and CCD perpendicular to the SPIISZ, emphasizing it as a main continental suture zone between crustal blocks.     

Paleostress analysis of the brittle deformations on the northwestern margin of the Red Sea and the southern Gulf of Suez,Egypt

Shear fractures, dip-slip, strike-slip faults and their striations are preserved in the pre- and syn-rift rocks at Gulf of Suez and northwestern margin of the Red Sea. Fault-kinematic analysis and paleostress reconstruction show that the fault systems that control the Red Sea–Gulf of Suez rift structures develop in at least four tectonic stages. The first one is compressional stage and oriented NE–SW. The average stress regime index R' is 1.55 and S_Hmax oriented NE–SW. This stage is responsible for reactivation of the N–S to NNE, ENE and WNW Precambrian fractures. The second stage is characterized by WNW dextral and NNW to N–S sinistral faults, and is related to NW–SE compressional stress regime. The third stage is belonging to NE–SW extensional regime. The S_Hmax is oriented NW–SE parallel to the normal faults, and the average stress regime R' is equal 0.26. The NNE–SSW fourth tectonic stage is considered a counterclockwise rotation of the third stage in Pliocene-Pleistocene age. The first and second stages consider the initial stages of rifting, while the third and fourth represent the main stage of rifting.     

Active tectonism in the central Alps: contrasting stress regimes north and south of the Rhone Valley

An integrated interpretation of seismicity, fault plane solutions and deep seismic reflection data suggests that the NE–SW to NW–SE trending Rhone–Simplon fault zone and the gently S-dipping basal Penninic thrust separate fundamentally different stress regimes in the western Swiss Alps. North of the Rhone-Simplon fault zone, strike-slip earthquakes on steep-dipping faults within the Helvetic nappes are a consequence of regional NW–SE compression and NE–SW extension. To the south, vertical maximum stress and N–S extension are responsible for normal mechanism earthquakes that occur entirely within the Penninic nappes above the basal Penninic thrust. Such normal faulting likely results from extension associated with southward movements (collapse) of the Penninic nappes and/or continued uplift and relative northward displacements of the underlying Alpine massifs. Geological mapping and fission-track dating suggest that the two distinct stress regimes have controlled tectonism in the western Swiss Alps since at least the Neogene.     

Near N–S paleo-extension in the western Deccan region,India: Does it link strike-slip tectonics with India–Seychelles rifting?

This is the first detailed report and analyses of deformation from the W part of the Deccan large igneous province (DLIP), Maharashtra, India. This deformation, related to the India–Seychelles rifting during Late Cretaceous–Early Paleocene, was studied, and the paleostress tensors were deduced. Near N–S trending shear zones, lineaments, and faults were already reported without significant detail. An E–W extension was envisaged by the previous workers to explain the India–Seychelles rift at ~64 Ma. The direction of extension, however, does not match with their N–S brittle shear zones and also those faults (sub-vertical, ~NE–SW/~NW–SE, and few ~N–S) we report and emphasize in this work. Slickenside-bearing fault planes, brittle shear zones, and extension fractures in meso-scale enabled us to estimate the paleostress tensors (directions and relative magnitudes). The field study was complemented by remote sensing lineament analyses to map dykes and shear zones. Dykes emplaced along pre-existing ~N–S to ~NE–SW/~NW–SE shears/fractures. This information was used to derive regional paleostress trends. A ~NW–SE/NE–SW minimum compressive stress in the oldest Kalsubai Subgroup and a ~N–S direction for the younger Lonavala, Wai, and Salsette Subgroups were deciphered. Thus, a ~NW/NE to ~N–S extension is put forward that refutes the popular view of E–W India–Seychelles extension. Paleostress analyses indicate that this is an oblique rifted margin. Field criteria suggest only ~NE–SW and ~NW–SE, with some ~N–S strike-slip faults/brittle shear zones. We refer this deformation zone as the "Western Deccan Strike-slip Zone" (WDSZ). The observed deformation was matched with offshore tectonics deciphered mainly from faults interpreted on seismic profiles and from magnetic seafloor spreading anomalies. These geophysical findings too indicate oblique rifting in this part of the W Indian passive margin. We argue that the Seychelles microcontinent separated from India only after much of the DLIP erupted. Further studies of magma-rich passive margins with respect to timing and architecture of deformation and emplacement of volcanics are required.     

Active tectonics,fault patterns,and stress field of Deception Island: A response to oblique convergence between the Pacific and Antarctic plates

Palaeostress results derived from brittle mesoscopic structures on Deception Island (Bransfield Trough, Western Antarctica) show a recent stress field characterized by an extensional regime, with local compressional stress states. The maximum horizontal stress (σ_y) shows NW–SE and NNE–SSW to NE–SW orientations and horizontal extension (σ₃) in NE–SW and WNW–ESE to NW–SE directions. Alignments of mesofractures show a maximum of NNE–SSW orientation and several relative maxima striking N030-050E, N060-080E, N110-120E, and N160-170E. Subaerial and submarine macrofaults of Deception Island show six main systems controlling the morphology of the island: N–S, NNE–SSW, NE–SW, ENE–WSW to E–W, WNW–ESE, and NNW–SSE. Geochemical patterns related to submarine hydrothermally influenced fault and fissure pathways also share the same trends. The orientation of these fault systems is compared to Riedel shear fractures. Following this model, we propose two evolutionary stages from geometrical relationships between the location and orientation of joints and faults. These stages imply a counter-clockwise rotation of Deception Island, which may be linked to a regional left-lateral strike-slip. In addition, the simple shear zone could be a response to oblique convergence between the Antarctic and Pacific plates. This stress direction is consistent with the present-day movements between the Antarctic, Scotia, and Pacific plates. Nevertheless, present basalt-andesitic volcanism and deep earthquake focal mechanisms may indicate rollback of the former Phoenix subducted slab, which is presently amalgamated with the Pacific plate. We postulate that both mechanisms could occur simultaneously.     

Structural Mapping of the Bentong‐Raub Suture Zone Using PALSAR Remote Sensing Data,Peninsular Malaysia: Implications for Sediment‐hosted/Orogenic Gold Mineral Systems Exploration

The Bentong‐Raub Suture Zone (BRSZ) of Peninsular Malaysia is one of the major structural zones in Sundaland, Southeast Asia. It forms the boundary between the Gondwana‐derived Sibumasu terrane in the west and Sukhothai Arc in the east. The BRSZ is genetically related to the sediment‐hosted/orogenic gold deposits associated with the major lineaments in the Central Gold Belt of Peninsular Malaysia. In this investigation, the Phased Array type L‐band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in Peninsular Malaysia and provide detailed characterization of lineaments and curvilinear structures in the BRSZ, as well as their implication for sediment‐hosted/orogenic gold exploration in tropical environments. Major structural lineaments such as the Bentong‐Raub Suture Zone (BRSZ) and Lebir Fault Zone, ductile deformation related to crustal shortening, brittle disjunctive structures (faults and fractures) and collisional mountain range (Main Range granites) were detected and mapped at regional scale using PALSAR ScanSAR data. The major geological structure directions of the BRSZ were N–S, NNE–SSW, NE–SW and NW–SE, which derived from directional filtering analysis to PALSAR fine and polarimetric data. The pervasive array of N–S faults in the Central Gold Belt and surrounding terrain is mainly linked to the N–S trending of the Suture Zone. N–S striking lineaments are often cut by younger NE–SW and NW–SE‐trending lineaments. Gold mineralized trend lineaments are associated with the intersection of N–S, NE–SW, NNW–SSE and ESE–WNW faults and curvilinear features in shearing and alteration zones. Compressional tectonic structures such as the NW–SE trending thrust, ENE–WSW oriented faults in mylonite and phyllite, recumbent folds and asymmetric anticlines in argillite are high potential zones for gold prospecting in the Central Gold Belt. Three generations of folding events in Peninsular Malaysia have been recognized from remote sensing structural interpretation. Consequently, PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detailed structural analysis of fault systems and deformation areas with high potential for sediment‐hosted/orogenic gold deposits and polymetallic vein‐type mineralization along margins of Precambrian blocks, especially for inaccessible regions in tropical environments.     

Tectonics of the Northern Bresse region (France) during the Alpine cycle

Combining fieldwork and surface data, we have reconstructed the Cenozoic structural and tectonic evolution of the Northern Bresse. Analysis of drainage network geometry allowed to detect three major fault zones trending NE–SW, E–W and NW–SE, and smooth folds with NNE trending axes, all corroborated with shallow well data in the graben and fieldwork on edges. Cenozoic paleostress succession was determined through fault slip and calcite twin inversions, taking into account data of relative chronology. A N–S major compression, attributed to the Pyrenean orogenesis, has activated strike-slip faults trending NNE along the western edge and NE–SW in the graben. After a transitional minor E–W trending extension, the Oligocene WNW extension has structured the graben by a collapse along NNE to NE–SW normal faults. A local NNW extension closes this phase. The Alpine collision has led to an ENE compression at Early Miocene. The following WNW trending major compression has generated shallow deformation in Bresse, but no deformation along the western edge. The calculation of potential reactivation of pre-existing faults enables to propose a structural sketch map for this event, with a NE–SW trending transfer fault zone, inactivity of the NNE edge faults, and possibly large wavelength folding, which could explain the deposit agency and repartition of Miocene to Quaternary deformation.     

The role of aeromagnetic data analysis (using 3D Euler deconvolution) in delineating active subsurface structures in the west central Arabian shield and the central Red Sea,Saudi Arabia

In this paper, we present a case study of structural mapping by applying the 3D Euler method to the high-resolution aeromagnetic data that was collected in the west central Arabian Shield region and the coastal region of the central Red Sea in Saudi Arabia. We show the 3D Euler deconvolution algorithm and apply it to magnetic potential field data from the west Central Arabian Shield and the Central Red Sea. The solution obtained with 3D Euler deconvolution gives better-focused depth estimates, which are closer to the real position of sources; the results presented here can be used to constrain depth to active crustal structures (volcanisms) for the study area. The results indicated that the area was affected by sets of fault systems, which primarily trended in the NNW–SSE, NW–SE, EW, and NE–SW directions. Moreover, estimated Euler solution map from aeromagnetic data delineated also the boundaries of shallow, small, and confined magnetic bodies on the offshore section of the study area. These nearly exposed basement intrusions are most likely related to the Red Sea Rift and may be associated with structures higher up in the sedimentary section. These volcanic bodies are extended to the continental part (onshore) of the west central Arabian Shield, particularly beneath both sides of the Ad Damm fault zone. This extension verifies that the fault was largely contemporaneous with a major period during the extension of the Red Sea Basin. Moreover, according to the distribution of circular magmatic-source bodies (circular-shaped ring dikes) that resulted from this study, we can state that the clustering of most earthquakes along this fault may most likely be attributed to the active mantle upwelling (volcanic earthquakes), which are ultimately related to volcanic processes. Furthermore, the oceanic crustal structures near and in the Red Sea offshore regions were also estimated and discussed according to the ophiolite occurrences and further opening of the Red Sea. Our results are largely comparable with studies of previous crustal sections, which were performed along the Red Sea Rift and the Arabian Shield. As a result, the areas above these anomalies are highly recommended for further geothermal study. This example illustrates that high-resolution aeromagnetic surveys can greatly help delineating the subsurface active structures in the west central Arabian Shield and the middle coastal region of the Red Sea of Saudi Arabia.     

Effects of the hydrothermal circulation on the strain field of the Campanian Plain (southern Italy)

Focal mechanisms of earthquakes and fault‐slip data have been collected to constrain the strain regime acting in the hydrothermal zone and surrounding areas of the Campanian Plain (southern Italy), a NW–SE elongated structural depression. The NW–SE striking faults bounding the depression move in response to a NE–SW striking regional extension. Within the depression, an extended hydrothermal circulation occurs related to the Vesuvius, Campi Flegrei and Ischia active volcanoes. In this zone, the strike of the extension is N–S. Results from a finite element model constrained by the collected data show that the presence of a lower rigidity zone due to the hydrothermal circulation may explain (a) the observed deflection of the direction of regional extension, and (b) why large magnitude earthquakes occur at the boundaries of the hydrothermal zone and not along the faults delimiting the structural depression.     

Analysis of the stress regime and tectonic evolution of the Azerbaijan Plateau,Northwestern Iran

The increasing number of earthquakes in recent decades in Northwestern Iran and the determination of the epicenters of these events makes possible to estimate accurately the changing tectonic regime using the Win-Tensor inversion focal mechanism program. For this purpose focal mechanism data were collected from various sources, including the Centroid Moment Tensor catalog (CMT). The focal mechanism and fault slip data were analyzed to determine change in the stress field up to the present day. The results showed that two stages of brittle deformation occurred in the region. The first stage was related to Eocene compression in NE–SW direction, which created compressional structures with NW–SE strike, including the North and South Bozgush, south Ahar and Gushedagh thrust belts. The second brittle stage began in the Miocene with NW–SE compression and caused developing thrusts with N–S trends that were active presently. These stress regimes were created by the counter-clockwise rotation of the Azerbaijan plateau caused by movement on strike slip faults and continuous compression between the Arabian plate, the south Caspian basin and the Caucasus region. Pliocene-Quaternary activity of the Sabalan and Sahand volcanoes as well as recent earthquakes occurred as a result of this displacement and rotational movement. The abundance of hot springs in the Ardebil, Hero Abad and Bostanabad areas also bore witness to this activity.     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and west-dipping, N–S to N20°–30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacılar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of left-lateral oblique slip of approximately 4.1 mm·year^–1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period.     

Seismogenic Structure of the April 20, 2013, Lushan Ms7 Earthquake in Sichuan

At 08:02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya'an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum earthquake intensity at the epicenter reached class IX. Field investigations in the epicenter area found that, although buildings were seriously damaged, no obvious surface rupture structure was produced, only some ground fissures and sand blows and water ejection phenomena being seen. An integrated analysis of high-resolution remote sensing image interpretation, mainshock and aftershock distribution, and focal mechanism solutions indicated that this earthquake was an independent rupturing event in the southwestern segment of the Longmenshan fault zone, belonging to the thrust-type earthquake. Ruptures occurred along the south-central segment of the Shuangshi-Dachuan fault and the principal rupture plane dipped SW at 33-43°. It is inferred that the Lushan earthquake might be related to the ramp activity of the basal detachment zone (13-19 km) of the Longmenshan fault zone. Historically, there occurred at least two Ms6-6.5 earthquakes along the Shuangshi-Dachuan fault zone; thus it is thought that the Lushan earthquake, different from the Wenchuan earthquake, was a characteristic one in the southwestern segment of the Longmenshan fault zone. In-situ stress measurements indicated the Lushan earthquake was the result of stress release of the southwestern segment of the Longmenshan fault zone after the Wenchuan earthquake. This paper analyzes the tectonic setting of the seismogenic structure of this earthquake.     

5.9 Mw, 18th June 2010 earthquake and fault segment linkage at Andaman – A study based on macroseismic survey,GPS geodesy and Coulomb stress changes

18th June, 2010 5.9 M_w earthquake at North Andaman triggered along NW–SE pre-existing fault with reverse fault mechanism. Macroseismic survey and GPS geodesy reveal maximum damages following NE–SW trend due to normal fault mechanism. Coulomb stress modeling for post- and inter-seismic earthquakes after the 2004 mega-earthquake show different stages of fault segment linkage at North Andaman. The present earthquake has been explained as co-shock due to asiesmic soft linkage of fault propagation.     

Coastal uplift in continental collision plate boundaries: data from the Last Interglacial marine terraces of the Gibraltar Strait area (south Spain)

The spatial–height analyses of deposits belonging to isotopic substages 5e and 5c indicate the occurrence of differential uplift in the Gibraltar Strait area. Maximum mean uplift rates do not reach values of 0.2 mm/year displaying a gentle deceleration from 0.15 to 0.10 mm/year for the last 128 ka. Maximum estimated rates are recorded in the central sector of the Gibraltar Strait. The combined analysis of the accumulated vertical movements before and after ISS 5c indicates that differential uplift is accommodated along NE–SW sinistral and NW–SE dextral (mostly inherited) strike-slip fault systems separating coastal segments of contrasting uplifting/subsiding behaviour. The occurrence of inversions in the relative vertical offsets along some of these faults arises when this combined analysis is performed. A model of `asymmetric' pure shear, defined by these two fault systems, generated in response to the roughly N–S convergence between the African and Eurasian plates, can explain the recorded uplift patterns. In this transpressive setting generated by the Africa–Eurasia continental collision the recent convergence (4 mm/year) is mostly released by shear processes and subsidiary E–W horizontal extension, whilst the recorded coastal uplift only represents a low percentage of the recent convergence rates.     

Late Cenozoic transtensional fault belt discovered on the boundary of the Awati Sag in the northwestern Tarim Basin

Late Cenozoic transtensional fault belt was discovered on Shajingzi fault belt, NW boundary of the Awati Sag in the northwestern Tarim Basin. And numerous Quaternary normal faults were discovered on Aqia and Tumuxiuke fault belts, SW boundary of Awati. This discovery reveals Quaternary normal fault activity in the Tarim Basin for the first time. It is also a new discovery in the southern flank of Tianshan Mountains. Shajingzi transtensional fault belt is made up of numerous, small normal faults. Horizontally, the normal faults are arranged in right-step, en echelon patterns along the preexisting Shajingzi basement fault, forming a sinistral transtensional normal fault belt. In profile, they cut through the Paleozoic to the mid-Quaternary and combine to form negative flower structures. The Late Cenozoic normal faults on the SW boundary of Awati Sag were distributed mainly in the uplift side of the preexisting Aqia and Tumuxiuke basement-involved faults, and combined to form small horst and graben structures in profile. Based on the intensive seismic interpretation, careful fault mapping, and growth index analysis, we conclude that the normal fault activity of Shajingzi transtensional fault belt began from Late Pliocene and ceased in Late Pleistocene (mid-Quaternary). And the normal faulting on the SW boundary of Awati Sag began from the very beginning of Quaternary and ceased in Pleistocene. The normal faulting on Awati’s SW boundary began a little later than those on the NW boundary. The origin of Shajingzi transtensional normal fault belt was due to the left-lateral strike-slip occurred in the southern flank of Tianshan, and then, due to the eastward escape of the Awati block, a tensional stress developed the normal faults on its SW boundary.     

Quaternary neotectonics of the Somogy Hills, Hungary (part I): Evidence from field observations

Quaternary and directly underlying Late Miocene (Pannonian) outcrops were analysed by structural, tectono-morphologic and sedimentologic methods to describe the main fault directions, to separate mass movements from faulting and folding and to separate earthquake-induced sediment deformations from other (e.g. periglacial) effects in the Somogy Hills. This is a gentle hilly area elevated at 200–300 m above sea level, located immediately south of Lake Balaton, Hungary.

Quaternary outcrops showed several consistent directions of faulting, and co-depositional seismic activity. Three different Mohr-sets of faults/joints could be differentiated in Quaternary sediments. The three sets are considered Late Quaternary since all cut young loess sections and have morphological expressions.

On the basis of the microtectonic measurements and morphotectonic investigations, the following sequence of Quaternary events can be proposed:

1. A (W)NW–(E)SE compression and perpendicular extension would create E–W to WNW–ESE oriented right lateral, NNW–SSE to N–S oriented left lateral shear zones, and NW–SE striking normal faults. Some of these can be evidenced in morphology and among the individual fault measurements. Some reactivated faults might suggest that this field is a relatively older one, but fresh topographic elements suggest that this stress field might be operational sub-recently.

2. A second stress field with NNW–SSE extensional and ENE–WSW oriented compressional directions could be separated. This stress field could create NNE–SSW and NW–SE oriented shear fractures and ENE–WSW oriented conjugate normal faults. Flat thrusts giving ENE directed shear may also be active under this field.

3. A third stress field might be proposed with N–S compression and perpendicular extension directions. This would create NE–SW and NW–SE oriented shear fractures, which are observed in the measured fault data. It is remarkable that the NE–SW faults are all steep, subvertical, and give a very well defined fault set. Based on the fresh topographic expression, this stress field is also sub-recent.

The different sub-recent stress fields and related fault patterns might succeed each other or might alternate through time. The first and third deformations have fresh topographic expressions and cannot play synchronously. The observed features suggest a compressionally active neotectonics of the study area.     

Aftershocks of 26th january 2001 Bhuj earthquake and seismotectonics of the Kutch region

The 26th January 2001 Bhuj earthquake was followed by intense aftershock activity. Aftershock data from United States Geological Survey (USGS) utilized in this study encompasses three months period from 26th January to 26th April 2001. Epicenters of the aftershock are plotted on a map depicting active faults. All the aftershocks of magnitude > 5 and 70% of those ranging between magnitude 3 and 5 are confined to an area resembling a horseshoe pattern with a pointed end towards NE. The other 20% of magnitude 3 to 5 are enclosed within an almost parallel boundary. Only 10% are found to be beyond this limiting boundary. 50% of the recorded after-shocks took place within the first week of the main event and this study reveals that the basic characteristic pattern of aftershock activity can be determined on the basis of the data of only one week. Four major NW-SE trending active faults are mapped in the Kutch region. They define the western limit of Cambay structure and also mark the western limit of Dharangadhra and Wadhwan basins along the SE continuation in Saurashtra. These faults separate the Kutch region into two geologically different blocks. On the SW side the mapped horseshoe pattern gets characteristically truncated along the western most fault, which is characterized by a strike-slip movement in the south and vertical movement in the north. The present study has revealed that the epicenter of the 26th January earthquake is located in the vicinity of the Bhachau township, close to the intersection with the Kutch mainland fault. Furthermore, it has been noticed that most of the epicenters of the aftershock are confined in the intersectional area of the Kutch mainland fault and the NW-SE faults.     

四川芦山2013年Ms7.0地震发震构造初步研究

2013年4月20日8时2分,四川龙门山断裂带的雅安芦山发生Ms7.0级地震,震中位于芦山县太平镇和双石镇之间,震源深度13～14km,震中最大烈度达IX级。震中区野外调查发现,尽管房屋建筑损坏较严重,但这次地震没有产生明显的地表破裂构造,仅见少量的地裂缝和喷砂冒水现象。高分辨率遥感图像解译、主余震分布、震源机制解等综合分析认为,该地震是龙门山断裂带西南段一次独立的破裂事件,属于逆冲型地震,沿双石-大川断裂中南段发生破裂,主破裂面西倾,倾角33°～43°,推断芦山地震与龙门山构造带底部滑脱带(13～19km)断坡构造活动有关。历史上,沿双石-大川断裂发生至少2次Ms6～6.5级地震,由此认为芦山地震是龙门山断裂带西南段特征型地震,与汶川地震不同。原地地应力测量和监测数据表明这是汶川地震后龙门山断裂带西南段应力释放的结果。     

Neotectonics of the Somogy hills (Part II): Evidence from seismic sections

The Somogy hills are located in the Pannonian Basin, south of Lake Balaton, Hungary, above several important tectonic zones. Analysis of industrial seismic lines shows that the pre-Late Miocene substratum is deformed by several thrust faults and a transpressive flower structure. Basement is composed of slices of various Palaeo-Mesozoic rocks, overlain by sometimes preserved Paleogene, thick Early Miocene deposits. Middle Miocene, partly overlying a post-thrusting unconformity, partly affected by the thrusts, is also present. Late Miocene thick basin-fill forms onlapping strata above a gentle paleo-topography, and it is also folded into broad anticlines and synclines. These folds are thought to be born of blind fault reactivation of older thrusts. Topography follows the reactivated fold pattern, especially in the central-western part of the study area.

The map pattern of basement structures shows an eastern area, where NE–SW striking thrusts, folds and steep normal faults dominate, and a western one, where E–W striking thrusts and folds dominate. Folds in Late Neogene are also parallel to these directions. A NE–SW striking linear normal fault and associated N–S faults cut the highest reflectors. The NE–SW fault is probably a left-lateral master fault acting during–after Late Miocene. Gravity anomaly and Pleistocene surface uplift maps show a very good correlation to the mapped structures. All these observations suggest that the main Early Miocene shortening was renewed during the Middle and Late Miocene, and may still persist.

Two types of deformational pattern may explain the structural and topographic features. A NW–SE shortening creates right-lateral slip along E–W faults, and overthrusts on NE–SW striking ones. Another, NNE–SSW shortening creates thrusting and uplift along E–W striking faults and transtensive left-lateral slip along NE–SW striking ones. Traces of both deformation patterns can be found in Quaternary exposures and they seem to be consistent with the present day stress orientations of the Pannonian Basin, too. The alternation of stress fields and multiple reactivation of the older fault sets is thought to be caused by the northwards translation and counter-clockwise rotation of Adria and the continental extrusion generated by this convergence.