A multi‐system geochronology in the Ad‐3 borehole,Pannonian Basin (Hungary) with implications for dating volcanic rocks by low‐temperature thermochronology and for interpretation of (U–Th)/He data

Independent geochronological and thermal modelling approaches are applied to a biostratigraphically exceptionally well‐controlled borehole, Alcsútdoboz‐3 (Ad‐3), in order to constrain the age of Cenozoic geodynamic events in the western Pannonian Basin and to test the efficacy of the methods for dating volcanic rocks. Apatite fission track and zircon U–Pb data show two volcanic phases of Middle Eocene (43.4–39.0 Ma) and Early Oligocene (32.72 ± 0.15 Ma) age respectively. Apatite (U–Th)/He ages (23.8–14.8 Ma) and independent thermal and subsidence history models reveal a brief period of heating to 55–70 °C at ~17 Ma caused by an increased heat‐flow related to crustal thinning and mantle upwelling. Our results demonstrate that, contrary to common perception, the apatite (U–Th)/He method is likely to record ‘apparent’ or ‘mixed’ ages resulting from subsequent thermal events rather than ‘cooling’ or ‘eruption’ ages directly related to distinct geological events. It follows that a direct conversion of ‘apparent’ or ‘mixed’ (U‐Th)/He ages into cooling, exhumation or erosion rates is incorrect.     

Low Temperature History of the Tiegelongnan Porphyry–Epithermal Cu (Au) Deposit in the Duolong Ore District of Northwest Tibet,China

The Tiegelongnan is the first discovered porphyry–epithermal Cu (Au) deposit of the Duolong ore district in Tibet, China. In order to constrain the thermal history of this economically valuable deposit and the rocks that host it, eight samples were collected to perform a low‐temperature thermochronology analysis including apatite fission track, apatite, and zircon (U‐Th)/He. Apatite fission track ages of all samples are between 34 ± 3 and 67 ± 5 Ma. Mean apatite (U‐Th)/He ages show wide distribution, ranging from 29.3 ± 2.5 to 56.4 ± 9.1 Ma. Mean zircon (U‐Th)/He ages range from 79.5 ± 12.0 to 97.9 ± 4.4 Ma. The exhumation rate of the Tiegelongnan deposit was 0.086 km m.y.^?1 between 98 and 47 Ma and decreased to 0.039 km m.y.^?1 since 47 Ma. The mineralized intrusion was emplaced at a depth of about 1400 m in the Tiegelongnan deposit. Six cooling stages were determined through HeFTy software according to low‐temperature thermochronology and geochronology data: (i) fast cooling stage between 120 and 117 Ma, (ii) fast cooling stage between 117 and 100 Ma, (iii) slow cooling stage between100 and 80 Ma, (iv) fast cooling stage between 80 and 45 Ma, (v) slow cooling stage between 45 and 30 Ma, and (vi) slow cooling stage (<30 Ma). Cooling stages between 120 and 100 Ma are mainly caused by magmatic–hydrothermal evolution, whereas cooling stages after 100 Ma are mainly caused by low‐temperature thermal–tectonic evolution. The Bangong–Nujiang Ocean subduction led to the formation of the Tiegelongnan ore deposit, which was buried by the Meiriqiecuo Formation andesite lava and thrust nappe structure; then, the Tiegelongnan deposit experienced uplift and exhumation caused by the India–Asia collision.     

Interpretation of (U–Th)/He single grain ages from slowly cooled crustal terranes: A case study from the Transantarctic Mountains of southern Victoria Land

Low temperature thermochronologic techniques (e.g. apatite fission track (AFT) thermochronology and (U–Th)/He dating) constrain near-surface T–t paths and are often applied to uplift/denudation and landscape evolution studies. Samples collected in vertical profiles from granitic walls on either side of the Ferrar Glacier, southern Victoria Land, Antarctica were analyzed using AFT thermochronology and apatite (U–Th)/He dating to further constrain the lowest temperature thermal history of this portion of the Transantarctic Mountains. AFT central ages vary systematically with elevation and together with track length information define a multi-stage cooling/denudation history in the Cretaceous and early Tertiary. Apatite (U–Th)/He single grain age variation with elevation is not as systematic with considerable intra-sample age variation. Although many complicating factors (e.g., U- and Th-rich (micro)inclusions, fluid inclusions, variation in crystal size, α-particle ejection correction, zonation and α-particle ejection correction, implantation of He into a crystal or impediment of He diffusion out of a crystal, and ¹⁴⁷Sm-derived α-particles) may contribute to age dispersion, we found that variation in single grain ages correlated with cooling rate. Samples that cooled relatively quickly have less variation in single grain ages, whereas samples that cooled relatively slowly (< 3 °C/m.y.) or resided within an (U–Th)/He partial retention zone (HePRZ) prior to more rapid cooling have a comparatively greater variation in ages.Decay of U and Th via α-particle emission creates a ⁴He concentration profile dependent upon the initial parent [U,Th] within a crystal. Variation of single grain ages for samples with non-homogeneous [U,Th] distributions will be enhanced with long residence time in the partial retention zone (i.e., slow cooling) because of the relative importance of loss via volume diffusion and loss via α-particle ejection with respect to the [U,Th] zonation and the grain boundary. Correction of ages for α-particle ejection (F_T correction factor) typically assumes uniform U and Th distribution within the crystal and when applied to a population of crystals with different U and Th distributions will enhance the variation in ages. Most complicating factors (listed above) for apatite (U–Th)/He ages result in ages that are “too old”. We propose that if considerable variation in (U–Th)/He single grain ages exists, that a weighted mean age is determined once outlier single crystal ages are excluded using the criterion of Chauvenet or a similar approach. We suggest that the “true age” or most representative age for that age population lies between the minimum (U–Th)/He age and the weighted mean age. We apply this approach, coupled with composite age profiles to better constrain the T–t history of the profiles along the Ferrar Glacier. Significant intra-sample variation in single crystal apatite (U–Th)/He ages and other minerals dated by the (U–Th)/He method should be expected, especially when the cooling rate is slow. The variation of (U–Th)/He single crystal ages is therefore another parameter that can be used to constrain low-temperature thermal histories.     

Dating late Quaternary events by the combined U‐Pb LA‐ICP‐MS and (U‐Th)/He dating of zircon: A case study on Omachi Tephra suite (central Japan)

Dating of young (<1 Ma) geological events has long been a challenge for geochronologists. Combining (U‐Th)/He with U‐Pb or U‐Th‐disequilibrium dating methods offers a unique dating tool that can address this important period. We present a new methodology that combines U‐Pb LA‐ICP‐MS and (U‐Th)/He dating of zircon and use it to date two Pleistocene marker tephras (A1Pm and DPm) from the Omachi Tephra suite (Japan). A1Pm and DPm yield U‐Pb ages in the range of 350–850 and ~140–630 ka, respectively, documenting protracted periods of zircon crystallisation (100's of k.y.) prior to eruption. (U‐Th)/He ages constrain the eruption ages of the A1Pm and DPm tephras to 375 ± 13 and 97.1 ± 7.3 ka, respectively, and are in agreement with published estimates. This study demonstrates the potential of combined zircon U‐Pb LA‐ICP‐MS and (U‐Th)/He dating to constrain magmatic and eruption events in the critical ~100 ka–1 Ma interval.     

A Potential (U‐Th)/He Zircon Reference Material from Penglai Zircon Megacrysts

In this study (U‐Th)/He dating of the Penglai zircons, which occur as abundant megacrysts in Neogene alkaline basalts in northern Hainan Province, south‐eastern China, was undertaken. A weighted mean age of 4.06 ± 0.35 Ma (2s) with a mean square weighted deviation (MSWD) of 1.79 was obtained from eighteen fragments of four zircon megacrysts using single‐crystal laser fusion He determinations and the U‐Th isotope dilution (ID) method. The (U‐Th)/He ages are consistent, homogeneous and systematically slightly younger than the preferred ²⁰⁶Pb/²³⁸U age of 4.4 ± 0.1 Ma (95% confidence interval) determined by ID‐TIMS and subsequently published U‐Pb results. The U‐Pb isotopic system in zircon has a high closure temperature of ~ 900 °C, and the preferred U‐Pb age may record both the time since eruption and the zircon residence time in the magma chamber. In contrast, the closure temperature of the zircon (U‐Th)/He system is ~ 190 °C and the zircon megacrysts were brought quickly to the surface by the host basaltic magma. Thus, the (U‐Th)/He age represents the timing of the eruption. Based on the unlimited quantity, large grain size, mostly weak broad zoning, rapid cooling and homogenous (U‐Th)/He ages, we consider the Penglai zircons suitable for use as a reference material in (U‐Th)/He isotope geochronology.     

Exhumation history of the Peake and Denison Inliers: insights from low-temperature thermochronology

Multi-method thermochronology applied to the Peake and Denison Inliers (northern South Australia) reveals multiple low-temperature thermal events. Apatite fission track (AFT) data suggest two main time periods of basement cooling and/or reheating into AFT closure temperatures (～60–120°C); at ca 470–440 Ma and ca 340–300 Ma. We interpret the Ordovician pulse of rapid basement cooling as a result of post-orogenic cooling after the Delamerian Orogeny, followed by deformation related to the start of the Alice Springs Orogeny and orocline formation relating to the Benambran Orogeny. This is supported by a titanite U/Pb age of 479 ± 7 Ma. Our thermal history models indicate that subsequent denudation and sedimentary burial during the Devonian brought the basement rocks back to zircon U–Th–Sm/He (ZHe) closure temperatures (～200–150°C). This period was followed by a renewal of rapid cooling during the Carboniferous, likely as the result of the final pulses of the Alice Springs Orogeny, which exhumed the inlier to ambient surface temperatures. This thermal event is supported by the presence of the Mount Margaret erosion surface, which indicates that the inlier was exposed at the surface during the early Permian. During the Late Triassic–Early Jurassic, the inlier was subjected to minor reheating to AFT closure temperatures; however, the exact timing cannot be deduced from our dataset. Cretaceous apatite U–Th–Sm/He (AHe) ages coupled with the presence of contemporaneous coarse-grained terrigenous rocks suggest a temporally thermal perturbation related with shallow burial during this time, before late Cretaceous exhumation cooled the inliers back to ambient surface temperatures.     

Thermochronological evidence for Mio‐Pliocene late orogenic extension in the north‐eastern Albanides (Albania)

New apatite and zircon (U–Th)/He and apatite fission‐track (FT) data allow constraining the timing of Miocene–Pliocene extensional exhumation that affected the central part of the Dinarides‐Albanides‐Hellenides orogen. Apatite (U–Th)/He ages in the northern and western Internal Albanides range from 57 to 17 Ma, contrasting to younger ages of 5.2–9.3 Ma in the eastern Internal Albanides. Eastward younging is also reflected in zircon (U–Th)/He ages varying from 101 Ma in the north‐western Internal Albanides to 19–50 Ma in the east, as well as in recently published apatite FT ages. Thermal history predictions with the new data point to a phase of rapid exhumation of the eastern Internal Albanides around 6–4 Ma, while the western Internal Albanides record slower continuous exhumation since the Eocene. This asymmetric exhumation pattern is most likely linked to extensional reactivation of NE–SW‐trending thrusts east of the Mirdita zone and within the Korabi zone of the eastern Internal Albanides.     

In situ monazite (U–Th)–Pb ages from the Southern Brasília Belt,Brazil: constraints on the high‐temperature retrograde evolution of HP granulites

In the southern sector of the Southern Brasília Belt, late Neoproterozoic arc–passive margin collision resulted in juxtaposition of an arc‐derived nappe (the Socorro–Guaxupé Nappe) over a stack of passive margin‐derived nappes (the Andrelândia Nappe Complex) that lies on top of autochthonous basement of the São Francisco Craton. (U–Th)–Pb monazite ages are reported from the high‐grade nappes of the Andrelândia Nappe Complex to better constrain the high‐temperature retrograde evolution. For residual HP granulites from the uppermost Três Pontas–Varginha Nappe, (U–Th)–Pb ages of c. 662 and 655 Ma from low yttrium monazite inclusions in the rims of, or associated with garnet are interpreted to date the late‐stage close‐to‐peak prograde evolution, whereas an age of c. 648 Ma from a similar low yttrium monazite inclusion is interpreted to record post‐peak recrystallization with melt via factures in garnet. For the same nappe, ages of 640–631 Ma retrieved from higher yttrium areas or cores in monazite grains that occur both as inclusions in garnet and in the matrix are interpreted to record growth of monazite either by local breakdown of garnet (±older monazite) and mass exchange with a matrix melt reservoir along cracks or growth from residual melt in the matrix as it crystallized during high‐pressure, close‐to‐isobaric cooling close to the solidus, the temperature of which, at a given pressure, varies with bulk composition of the residual granulites. (U–Th)–Pb ages in the range 620–588 Ma from lower yttrium areas in these monazite grains and from matrix‐hosted patchy monazite are interpreted to date exhumation, as recorded by close‐to‐isothermal decompression and subsequent close‐to‐isobaric cooling. Older monazite ages in this group are interpreted to record late‐stage interaction with melt close to the solidus whereas younger monazite ages are interpreted to record recrystallization of monazite by dissolution–reprecipitation owing to ingress of alkali fluid from the Carmo da Cachoeira Nappe beneath as fluid was released by crystallization of in‐source melt at the solidus. In the underlying Carmo da Cachoeira Nappe, higher yttrium areas in monazite and one single domain monazite yield chemical ages of 619–616 Ma, which are interpreted to date growth as in‐source melt crystallized close to the solidus along the high‐pressure, close‐to‐isobaric segment of the retrograde P–T evolution. Younger (U–Th)–Pb ages of 600–595 Ma retrieved from lower yttrium areas and one single domain monazite are interpreted to record recrystallization of monazite by dissolution–reprecipitation owing to release of fluid at the solidus during exhumation of this nappe. Monazite from the Carvalhos Klippe, interpreted to be correlative with the uppermost nappe, yields a wide range of (U–Th)–Pb ages: for two zoned grains, c. 619 and c. 614 Ma from higher yttrium cores, and c. 583 and c. 595 Ma from lower yttrium rims; and, 592–580 Ma from single domain grains in one sample, and ages of c. 593 and c. 563 Ma from monazite in a second sample. Ages younger than 605 Ma are interpreted to date a fluid‐induced response to the early stages of orogenic loading associated with terrane accretion in the Ribeira Belt to the southeast. The results reported here demonstrate that ages retrieved from monazite that grew close to the solidus in residual granulites from a single tectonic unit will vary from sample to sample according to differences in the solidus temperatures. Further, we show that monazite inclusions may yield ages that are younger than the host mineral and confirm the propensity of monazite to record evidence of tectonic events that are not always registered by other high‐temperature mineral chronometers.     

Thermochronological insights into the structural contact between the Tian Shan and Pamirs,Tajikistan

Multi‐method thermochronology along the Vakhsh‐Surkhob fault zone reveals the thermotectonic history of the South Tian Shan–Pamirs boundary. Apatite U/Pb analyses yield a consistent age of 251 ± 2 Ma, corresponding to cooling below ~550–350°C, related to the final closure of the Palaeo‐Asian Ocean and contemporaneous magmatism in the South Tian Shan. Zircon (U–Th–Sm)/He ages constrain cooling below ~180°C to the end of the Triassic (~200 Ma), likely related either to deformation induced by the Qiangtang collision or to the closure of the Rushan Ocean. Apatite fission track thermochronology reveals two low‐temperature (<120°C) thermal events at ~25 Ma and ~10 Ma, which may be correlated with tectonic activity at the distant southern Eurasian margin. The late Miocene cooling is confirmed by apatite (U–Th–Sm)/He data and marks the onset of mountain building within the South Tian Shan that is ongoing today.     

Reconstructing deep‐time histories from integrated thermochronology: An example from southern Baffin Island,Canada

We present a multi‐chronometric approach for reconstructing deep‐time thermal histories using southern Baffin Island as a case study. This continuous thermal history begins with the Palaeoproterozoic Trans‐Hudson Orogeny and is derived from inverse and forward models that integrate thermochronometers spanning some 500°C: new apatite U–Pb ages and K‐feldspar ⁴⁰Ar/³⁹Ar multi‐diffusion domain data, published (U–Th)/He zircon ages and new multi‐kinetic fission‐track results. Integration of data from a wider temperature range reduces ambiguities in thermal‐history modelling and permits us to constrain the timing of geological processes including, extended post‐orogenic cooling, enhanced later Proterozoic cooling, and then episodic burial and exhumation in the Palaeozoic–Mesozoic.     

Crustal response to continental collisions between the Tibet, Indian, South China and North China Blocks: geochronological constraints from the Songpan-Garzê Orogenic Belt, western China

We report SHRIMP U–Th–Pb monazite, conventional U–Pb titanite, Sm–Nd garnet and Rb–Sr muscovite and biotite ages for metamorphic rocks from the Danba Domal Metamorphic Terrane in the eastern Songpan‐Garzê Orogenic Belt (eastern Tibet Plateau). These ages are used to determine the timing of polyphase metamorphic events and the subsequent cooling history. The oldest U–Th–Pb monazite and Sm–Nd garnet ages constrain an early Barrovian metamorphism (M1) in the interval c. 204–190 Ma, coincident with extensive Indosinian granitic magmatism throughout the Songpan‐Garzê Orogenic Belt. A second, higher‐grade sillimanite‐grade metamorphic event (M2), recorded only in the northern part of the Danba terrane, was dated at c. 168–158 Ma by a combination of U–Th–Pb monazite and titanite and Sm–Nd garnet ages. It is suggested that M1 was a thermal event that affected the entire orogenic belt while M2 may represent a local thermal perturbation. Rb–Sr muscovite ages range from c. 138–100 Ma, whereas Rb–Sr biotite ages cluster at c. 34–24 Ma. These ages document regional cooling at rates of c. 2–3 °C Myr^?1 following the M1 peak for most of the terrane. However, those parts of the terrane affected by the higher‐temperature M2 event (e.g. the migmatite zone) experienced initially more rapid (c. 8 °C Myr^?1) cooling after peak M2 before joining the regional slow cooling path defined by the rest of the terrane at c. 138 Ma. Regional slow cooling between c. 138 and c. 30 Ma is thought to be the result of post‐tectonic isostatic uplift after extensive crustal thickening caused by collision of the South and North China Blocks. The clustering of biotite Rb–Sr ages marks the onset of rapid uplift across the entire terrane commencing at c. 30–20 Ma. This cooling history is shared with many other regions of the Tibet Plateau, suggesting that uplift of the Tibet Plateau (including the Songpan‐Garzê Orogenic Belt) occurred predominantly in the last c. 30 Myr as a response to the continuing northwards collision of India with Eurasia.     

Tectono-thermal Evolution in the Bachu Uplift,Tarim Basin,China

<正>The thermal evolution of source rocks in the Paleozoic has long been a problem to petroleum exploration in the Bachu uplift,Tarim basin,since the thermal history in the Paleozoic could not be rebuilt objectively due to lack of effective thermal indicators in the Lower Paleozoic successions.The apatite and zircon(U-Th)/He thermochronometry can be used as a new kind of technique to study the thermal history and tectonic uplift of sedimentary basins.Based on the measured apatite and zircon(U-Th)/He ages,apatite fission track data and equivalence vitrinite reflectance(%EVR_o),the tectonothermal histories in 5 wells of the Bachu uplift were modeled.The modeling results show that there was relatively high gradient at the Early Paleozoic in the Bachu uplift and it decreased gradually during the entire Paleozoic:33-35℃/km in the Cambrian-Ordovician, 32-33℃/km in the Silurian-Devonian,30-32℃/km at the end of Carboniferous and 27.5- 31℃/km at the end of Permian.Therefore,the thermal history can be modeled by combining multiple thermal indicators of AFT,(U-Th)/He ages and EVR_o data.Especially,this provides a new method to rebuild the thermal history for the Low Paleozoic carbonate successions in the Tarim Basin.     

Diachronous exhumation of HP–LT metamorphic rocks from south‐western Alps: evidence from fission‐track analysis

New fission‐track ages on zircon and apatite (ZFT and AFT) from the south‐western internal Alps document a diachronous cooling history from east to west, with cooling rates of 15–19 °C Ma⁻¹. In the Monviso unit, the ZFT ages are 19.6 Ma and the AFT ages are 8.6 Ma. In the eastern Queyras, ZFT ages range from 27.0 to 21.7 Ma and AFT ages from 14.2 to 9.4 Ma. In the western Queyras, ZFT ages are between 94.7 and 63.1 Ma and AFT ages are between 22.2 and 22.6 Ma. The Chenaillet ophiolite yields ages of 118.1 Ma on ZFT and 67.9 Ma on AFT. The combination of these new FT data with the available petrological and geochronological data emphasize an earlier exhumation in subduction context before 30 Ma, then in collision associated with westward tilting of the Piedmont zone.     

MK‐1 Apatite: A New Potential Reference Material for (U‐Th)/He Dating

The (U‐Th)/He dating technique has been widely used for several decades to constrain the timing of low temperature geological processes. Recent research has shown that the commonly used reference material (the Durango apatite) often yields dispersed fragment dates that are beyond analytical uncertainties. Here, we report a new apatite (U‐Th)/He dating reference material, MK‐1, which was collected from the Mogok metamorphic belt in Burma. Electron probe microanalysis and backscattered electron images of two randomly selected fragments indicate that this apatite is chemically and structurally homogeneous. We performed single‐grain (U‐Th)/He dating on thirty randomly selected fragments of this material. (U‐Th)/He dating results from multiple laboratories show that fragments of the MK‐1 apatite megacryst yielded reproducible results, with a mean date of 18.0 ± 0.2 Ma. The Th/U ratio of this apatite is homogeneous. Nine randomly selected fragments registered a narrow range of effective uranium (eU) mass fractions (326–354 μg g^?1), with a mean value of 336.6 ± 10.3 μg g^?1. Twenty‐four in situ (U‐Th)/He dates yielded a mean value of 18.0 ± 0.2 Ma (MSWD = 0.41), indistinguishable from the results obtained by the conventional method. All the results suggest that this apatite has the potential to become a new reference material for (U‐Th)/He geochronology.     

Emplacement age and thermal footprint of the diamondiferous Ellendale E9 lamproite pipe, Western Australia

The diamondiferous Ellendale 9 (E9) pipe is a funnel-shaped maar-diatreme volcano consisting of inward-dipping tuff sequences intruded by lamproite plugs and dykes. The host rocks for the E9 pipe are Permian sandstones. The multiple lithological contacts exposed within the mined maar volcano provide a natural laboratory in which to study the effect of volcanic processes on U–Th–Pb–He systematics. Zircon from the regional sandstone and E9 lamproite display a bimodal distribution of ages on (U–Th)/He–U/Pb plots. The zircon U/Pb ages for the E9 pipe (n?=?52) range from 440 to 2,725 Ma, while the cluster of (U–Th)/He ages for the lamproite dyke zircon indicate that dyke emplacement occurred at 20.6?±?2.8 Ma, concordant with a maximum emplacement age of about ≤22 Ma from phlogopite ⁴⁰Ar/³⁹Ar. These ages indicate a xenocrystic origin for the zircon entrained in the E9 dyke. The U/Pb ages of detrital zircon from the regional sandstone host (373–3,248 Ma; n?=?41) are indistinguishable from those of the lamproite zircon xenocrysts, whereas the detrital zircon in the host sandstone yield (U–Th)/He ages from 260 to 1,500 Ma. A thermochronology traverse across the E9 lamproite dyke reveals that the zircon (U–Th)/He ages in the host sandstone have not been significantly thermally reset during dyke emplacement, even at the contact. The capability of the zircon (U–Th)/He method to distinguish deep, mantle source lithologies from upper crustal source lithologies could be used in geochemical exploration for diamonds. Pre-screening of detrital samples using etching and helium assay methods will improve the efficiency and decrease the cost of greenfields exploration.     

Meso‐Cenozoic Tectonothermal History of Permian Strata,Southwestern Weibei Uplift: Insights from Thermochronology and Geothermometry

This study provides an integrated interpretation for the Mesozoic-Cenozoic tectonothermal evolutionary history of the Permian strata in the Qishan area of the southwestern Weibei Uplift, Ordos Basin. Apatite fission-track and apatite/zircon(U-Th)/He thermochronometry, bitumen reflectance, thermal conductivity of rocks, paleotemperature recovery, and basin modeling were used to restore the Meso-Cenozoic tectonothermal history of the Permian Strata. The Triassic AFT data have a pooled age of ～180±7 Ma with one age peak and P(χ2)=86%. The average value of corrected apatite(U-Th)/He age of two Permian sandstones is ～168±4 Ma and a zircon(U-Th)/He age from the Cambrian strata is ～231±14 Ma. Bitumen reflectance and maximum paleotemperature of two Ordovician mudstones are 1.81%, 1.57% and ～210°C, ～196°C respectively. After undergoing a rapid subsidence and increasing temperature in Triassic influenced by intrusive rocks in some areas, the Permian strata experienced four cooling-uplift stages after the time when the maximum paleotemperature reached in late Jurassic:(1) A cooling stage(～163 Ma to ～140 Ma) with temperatures ranging from ～132°C to ～53°C and a cooling rate of ～3°C/Ma, an erosion thickness of ～1900 m and an uplift rate of ～82 m/Ma;(2) A cooling stage(～140 Ma to ～52 Ma) with temperatures ranging from ～53°C to ～47°C and a cooling rate less than ～0.1°C/Ma, an erosion thickness of ～300 m and an uplift rate of ～3 m/Ma;(3)(～52 Ma to ～8 Ma) with ～47°C to ～43°C and ～0.1°C/Ma, an erosion thickness of ～500 m and an uplift rate of ～11 m/Ma;(3)(～8 Ma to present) with ～43°C to ～20°C and ～3°C/Ma, an erosion thickness of ～650 m and an uplift rate of ～81 m/Ma. The tectonothermal evolutionary history of the Qishan area in Triassic was influenced by the interaction of the Qinling Orogeny and the Weibei Uplift, and the south Qishan area had the earliest uplift-cooling time compared to other parts within the Weibei Uplift. The early Eocene at ～52 Ma and the late Miocene at ～8 Ma, as two significant turning points after which both the rate of uplift and the rate of temperature changed rapidly, were two key time for the uplift-cooling history of the Permian strata in the Qishan area of the southwestern Weibei Uplift, Ordos Basin.     

Long-term cooling history of the Albertine Rift: new evidence from the western rift shoulder,D.R. Congo

To determine the long-term landscape evolution of the Albertine Rift in East Africa, low-temperature thermochronology was applied and the cooling history constrained using thermal history modelling. Acquired results reveal (1) “old” cooling ages, with predominantly Devonian to Carboniferous apatite fission-track ages, Ordovician to Silurian zircon (U–Th)/He ages and Jurassic to Cretaceous apatite (U–Th–Sm)/He ages; (2) protracted cooling histories of the western rift shoulder with major phases of exhumation in mid-Palaeozoic and Palaeogene to Neogene times; (3) low Palaeozoic and Neogene erosion rates. This indicates a long residence time of the analysed samples in the uppermost crust, with the current landscape surface at a near-surface position for hundreds of million years. Apatite He cooling ages and thermal history models indicate moderate reheating in Jurassic to Cretaceous times. Together with the cooling age distribution, a possible Albertine high with a distinct relief can be inferred that might have been a source area for the Congo Basin.     

A comparative U–Th–Pb (zircon–monazite) and 40Ar–39Ar (muscovite–biotite) study of shear zones in northern Victoria Land (Antarctica): implications for geochronology and localized reworking of the Ross Orogen

Mylonitic granites from two shear zones in northern Victoria Land (Antarctica) were investigated in order to examine the behaviour of the U–Th–Pb system in zircon and monazite and of the ⁴⁰Ar–³⁹Ar system in micas during ductile deformation. Meso‐ and micro‐structural data indicate that shear zones gently dip to the NE and SW, have an opposite sense of shear (top‐to‐the‐SW and ‐NE, respectively) and developed under upper greenschist facies conditions. In situ U–Pb dating by laser‐ablation inductively coupled plasma‐mass spectrometry of zircon areas with well‐preserved igneous zoning patterns (c. 490 Ma) confirm that granites were emplaced during the Early Cambrian to Early Ordovician Ross–Delamerian Orogeny. Monazite from the Bier Point Shear Zone (BPSZ) mainly yielded U–Th–Pb ages of c. 440 Ma, in agreement with in‐situ Ar laserprobe ages of syn‐shear muscovite and with most Ar ages of coexisting biotite. The agreement of ages derived from different decay schemes and from minerals with different crystal‐chemical features suggests that isotope transport in the studied sample was mainly controlled by (re)crystallization processes and that the main episode of ductile deformation in the BPSZ occurred at c. 440 Ma. Cathodoluminscence imaging showed that zircon from the BPSZ contains decomposed areas with faint relics of oscillatory zoning. These areas yielded a U–Pb age pattern which mimics that of monazite but is slightly shifted towards older ages, supporting previous studies which suggest that ‘ghost’ structures may be affected by inheritance. In contrast, secondary structures in zircon from the Mt. Emison Shear Zone (MESZ) predominantly consist of overgrowths or totally recrystallized areas and gave U–Pb ages of c. 450 and 410 Ma. The c. 450‐Ma date matches within errors most monazite U–Th–Pb ages and in‐situ Ar ages on biotite aligned along the mylonitic foliation. This again suggests that isotope ages from the different minerals are (re)crystallization ages and constrains the time of shearing in the MESZ to the Late Ordovician. Regionally, results indicate that shear zones were active in the Late Ordovician–Early Silurian and that their development was partially synchronous at c. 440 Ma, suggesting that they belong to a shear‐zone system formed in response to ～NE–SW‐directed shortening. Taking into account the former juxtaposition of northern Victoria Land and SE Australia, we propose that shear zones represent reactivated zones formed in response to stress applied along the new plate margin as a consequence of contractional tectonics associated with the early stages (Benambran Orogeny) of the development of the Late Ordovician–Late Devonian Lachlan Fold Belt.     

Dating of young (<1 Ma) tephras: Using U‐Pb (zircon) and (U‐Th[‐Sm])/He (zircon,apatite, magnetite) chronometers to unravel the eruption age of a tephra in the Woodlark Rift of Papua New Guinea

The dating of volcanic tephras forms a critical cornerstone of chronostratigraphy and is paramount for the resolution of the geological timescale. (U‐Th[‐Sm])/He dating is an emerging tool in Quaternary tephrochronology and ideally suited to date tephras <1 Ma. We present zircon, magnetite and apatite (U‐Th[‐Sm])/He combined with zircon U‐Pb data for a Pleistocene tephra in syn‐rift strata of the Woodlark Rift in Papua New Guinea. The results reveal a young He age mode (~0.5 to 0.8 Ma), consistent with an autocrystic zircon U‐Pb crystallisation age of 0.8 ± 0.1 Ma, as well as a broad range of older (U‐Th[‐Sm])/He (~1.6 to 10.2 Ma) and U‐Pb (~4.4 to 107 Ma) ages. These data demonstrate the potential of integrated U‐Pb and (U‐Th[‐Sm])/He multi‐method chronometry for dating the youngest coherent age mode, detecting contaminant grains and evaluating the isotopic systematics of these techniques.     

Mesozoic exhumation history and palaeolandscape of the Iberian Massif in eastern Galicia from apatite fission-track and (U+Th)/He data

Apatite fission-track (AFT) and (U+Th)/He (AHe) data, combined with time–temperature inverse modelling, reveal the cooling and exhumation history of the Iberian Massif in eastern Galicia since the Mesozoic. The continuous cooling at various rates correlates with variation of tectonic boundary conditions in the adjacent continental margins. The data provide constraints on the 10⁷ timescale longevity of a relict paleolandscape. AFT ages range from 68 to 174 Ma with mean track lengths of 10.7 ± 2.6 to 12.6 ± 1.8 μm, and AHe ages range from 73 to 147 Ma. Fastest exhumation (≈0.25 km/Ma) occurred during the Late Jurassic to Early Cretaceous main episode of rifting in the adjacent western and northern margins. Exhumation rates have decreased since then and have been approximately one order of magnitude lower. Across inland Galicia, the AFT data are consistent with Early Cretaceous movement on post-Variscan NE trending faults. This is coeval with an extensional episode offshore. The AHe data in this region indicate less than 1.7 km of denudation in the last 100 Ma. This low exhumation suggests the attainment of a mature landscape during Late Cretaceous post-rift tectonic stability, whose remains are still preserved. The low and steady rate of denudation prevailed across inland Galicia despite minor N–S shortening in the northern margin since ≈45 Ma ago. In north Galicia, rock uplift in response to NW strike-slip faulting since Early Oligocene to Early Miocene has caused insufficient exhumation (<3 km) to remove the Mesozoic cooling signal recorded by the AFT data.