Tectonic uplift,sea level changes and Plio‐Pleistocene evolution of a coastal karst system: the Mount Saint Paul (Palawan,Philippines)

The St. Paul karst (Palawan, Philippines) is a tropical coastal karst, consisting of towers, cones, huge depressions and large caves. This area hosts the Puerto Princesa Subterranean River (PPSR, 24 km long), whose main entrance is a large spring along the coast and which is one of the largest cave complexes in eastern Asia. A geomorphological study performed by several field surveys and a morphometric analysis of the digital terrain model (DTM) and 3D cave models, allowed formulation of a first evolutionary framework of the karst system. The DTM was extracted from maps and aerial photographs in order to find different generations of ‘relict’ landforms, through the morphometric analysis of topographic surface and karst landforms. Several features suggest a long and multi‐stage evolution of the karst, whose age ranges from Pliocene to present. The southern and northern sectors of the area differ in their altimetric distribution of caves. In the southern sector, some large caves lie between 300 and 400 m asl and were part of an ancient system that developed at the base level of a past river network. In the northern sector, some mainly vadose caves occur, with a phreatic level at 120–130 m asl. An important phase of base‐level cave development is well documented in the inactive passages of PPSR at 50–80 m asl. Morphological features, such as horizontal solution passages and terraced deposits, suggest a phase of stillstand of the base level, which is recorded in the topography as low‐relief surfaces at 40–50 m asl. The age of this phase is probably Early Pleistocene, on the basis of assumed uplift rates. The more recent caves are still active, being located at the current sea level, but they show more than one cycle of flooding and dewatering (with calcite deposition). In the PPSR, several morphologic features, such as two main water level notches at +12·4 and +7·7 m asl and terraced alluvial deposits, suggest that the lower and active level passed through more than two high‐stands of sea level and so it could have formed throughout most of the Middle‐Late Pleistocene. Copyright © 2010 John Wiley & Sons, Ltd.     

Palaeomagnetic data from Ediacaran (Vendian) sediments of the Arkhangelsk region, NW Russia: An alternative apparent polar wander path of Baltica for the Late Proterozoic–Early Palaeozoic

The study area is situated along the Zolotica river in NW Russia, located within the Kola–Dvyna Rift System in the Baltic Shield that developed during Meso and Neoproterozoic times. A 9-m thick section made up of shallow marine sediments of Upper Ediacaran age was sampled in this locality. Two volcaniclastic levels from the middle part of the section yielded an age of 556 Ma. (U/Pb SHRIMP-II on zircons). Two magnetic components were successfully isolated, component A (Decl = 157.1, Incl = 68.0, ₉₅ = 1.9°, N = 575 in situ) carried by magnetite and component B (Decl = 120.3, Incl = − 31.7, ₉₅ = 3.9°, N = 57, bedding corrected), carried by haematite. While component A is thought to represent a younger overprint direction, the in situ direction for component B on the other hand, is dissimilar to any expected younger direction and is considered to be primary magnetisation in origin, acquired during or soon after deposition of the sediments in the Late Ediacaran. The corresponding palaeomagnetic pole for component A in situ is located at Lon = 55.4°E, Lat = 31°N, A₉₅ = 2.7° and for component B at Lon = 110°E, Lat = 28.3°S, A₉₅ = 3.8°, N = 57. Combined with other palaeomagnetic poles of the same tectonostratigraphic unit an alternative apparent polar wander path for the Late Proterozoic–Early Palaeozoic of Baltica is proposed. Such an alternative path shows that after the mid Cryogenian (750 Ma), the poles that were situated over South Africa (p.d.c.) moved to the east until they reached Australia during the Late Ediacaran (555 Ma) where they remained approximately stationary until the beginning of the Cambrian (545 Ma). Finally, they moved to the northwest until they reached the Arabian Peninsula in the Early Ordovician. Palaeolatitudes indicate that Baltica situated near the equator from the Cryogenian through to the Ediacaran moving gradually to the south at c. 1 cm/yr. During the Late Early Ediacaran, the plate suddenly began to drift northward at c. 8 cm/yr and in the boundary with the Cambrian it was positioned in low to intermediate latitudes. Finally, Baltica began to move back to the south at c. 13 cm/yr until in the Early Ordovician, reaching intermediate to high southern latitudes.     

Fusion of multi‐resolution surface (terrestrial laser scanning) and subsurface geodata (ERT,SRT) for karst landform investigation and geomorphometric quantification

A multi‐method research design based on terrestrial laser scanning, GIS, geophysical prospecting (electrical resistivity tomography, refraction seismics) and sedimentology is applied for the first time to investigate enclosed karst depressions in an integrated way. Fusing multi‐resolution surface and subsurface geodata provides profound insights into the formation, geometry and geomorphologic processes of dolines. The studied landforms, which are located in the Dikti Mountains of East Crete, are shown to be filled by loose sediments of thicknesses of up to 30 m that mainly consist of fine‐grained material overlying solid bedrock at depths below 35 to 45 m. By combining subsurface observations with geomorphometric calculations, local doline genesis can be traced back to initial collapse of fractured bedrock followed by subsequent infilling with colluvials. In order to define crucial methodological requirements and guidelines for data fusion, both the impact of different elevation models and the influence of data resolution are assessed. Surface volumes of depressions derived by the digital surface model are 7–21% higher than the results obtained from the terrain model due to vegetation. Similarly, estimates of infill volume calculated on the basis of geophysical outcomes and elevation data differ by up to 13%. Calculations of the landforms' current volumes (i.e. total surface and subsurface volume), however, are fairly insensitive to raster resolution. Hence, the distinct geomorphologic properties of landforms (e.g. shape, terrain roughness, slope inclination) substantially determine the geomorphometric analysis of both surface and subsurface data. As shown by the findings, data fusion to integrate digital terrain, geophysical and sedimentological datasets of varied resolutions benefits geomorphologic studies and helps provide a comprehensive image of landforms. Copyright © 2013 John Wiley & Sons, Ltd.     

Base Treated Cogon Grass (Imperata cylindrica) as an Adsorbent for the Removal of Ni(II): Kinetic,Isothermal and Fixed‐bed Column Studies

The adsorption of Ni(II) from aqueous solutions using base treated cogon grass or Imperata cylindrica (NHIC) was performed under batch and column modes. Batch experiments were conducted to determine the factors affecting adsorption such as pH, adsorbent dosage, initial nickel concentration, contact time and temperature. The fixed‐bed column experiment was performed to determine the practical applicability of NHIC and to obtain the breakthrough curve. Adsorption was fast as equilibrium was achieved within 60 min, and was best described by the pseudo second order model. According to the Langmuir model, a maximum adsorption capacity of 6.96 mg/g was observed at pH 5 and at a temperature of 313 K. Thermodynamic parameters such as ΔG⁰, ΔH⁰ and ΔS⁰ were calculated, and indicated that adsorption was a spontaneous and endothermic process. The mechanistic pathway of Ni(II) uptake was examined by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) spectroscopy. The Thomas and Yoon‐Nelson models were used to analyze the fixed‐bed column data.     

Schmidt‐hammer exposure‐age dating (SHD) of snow‐avalanche impact ramparts in southern Norway: approaches,results and implications for landform age,dynamics and development

Schmidt‐hammer exposure‐age dating (SHD) was applied to the problem of dating the diachronous surfaces of five distal river‐bank boulder ramparts deposited by snow avalanches plunging into the Jostedøla and Sprongdøla rivers in the Jostedalsbreen region of southern Norway. Approaches to local high‐precision linear age calibration, which controlled in different ways for boulder roundness, were developed. The mean age (SHD_mean) and the maximum age (SHD_max) of surface boulders were estimated for whole ramparts, crests and distal fringes. Interpretation was further assisted by reference to R‐value distributions. SHD_mean ages (with 95% confidence intervals) ranged from 520 ± 270 years to 5375 ± 965 years, whereas SHD_max ages (expected to be exceeded by <5% of surface boulders) ranged from 675 to 9065 years. SHD ages from the Jostedøla ramparts tended to be older than those associated with the Sprongdøla, rampart crests were younger than the respective distal fringes, and use of relatively rounded boulders yielded more consistent SHD ages than angular boulders. The SHD_mean ages indicate differences in recent levels of snow‐avalanche activity between ramparts and provide insights into rampart dynamics as boulders are deposited on rampart crests and, in smaller numbers, on the distal fringes. SHD_max ages provide minimum age estimates of rampart age (i.e. the time elapsed since the ramparts began to form) and suggest that at least some of the ramparts have been developing since the early Holocene. Copyright © 2015 John Wiley & Sons, Ltd.     

Evolution of the Cañadas edifice and its implications for the origin of the Cañadas Caldera (Tenerife, Canary Islands)

The volcano-stratigraphic and geochronologic data presented in this work show that the Tenerife central zone has been occupied during the last 3 Ma by shield or central composite volcanoes which reached more than 3000 m in height. The last volcanic system, the presently active Teide-Pico Viejo Complex began to form approximately 150 ka ago. The first Cañadas Edifice (CE) volcanic activity took place between about 3.5 Ma and 2.7 Ma. The CE-I is formed mainly by basalts, trachybasalts and trachytes. The remains of this phase outcrop in the Cañadas Wall (CW) sectors of La Angostura (3.5–3.0 Ma and 3.0–2.7 Ma), Boca de Tauce (3.0 Ma), and in the bottom of some external radial ravines (3.5 Ma). The position of its main emission center was located in the central part of the CC. The volcano could have reached 3000 m in height. This edifice underwent a partial destruction by failure and flank collapse, forming debris-avalanches during the 2.6–2.3 Ma period. The debris-avalanche deposits can be seen in the most distal zones in the N flank of the CE-I (Tigaiga Breccia). A new volcanic phase, whose deposits overlie the remains of CE-I and the former debris-avalanche deposits, constituted a new volcanic edifice, the CE-II. The dyke directions analysis and the morphological reconstruction suggest that the CE-II center was situated somewhat westward of the CE-I, reaching some 3200 m in height. The CE-II formations are well exposed on the CW, especially at the El Cedro (2.3–2.00 Ma) sector. They are also frequent in the S flank of the edifice (2.25–1.89 Ma) in Tejina (2.5–1.87 Ma) as well as in the Tigaiga massif to the N (2.23 Ma). During the last periods of activity of CE-II, important explosive eruptions took place forming ignimbrites, pyroclastic flows, and fall deposits of trachytic composition. Their ages vary between 1.5 and 1.6 Ma (Adeje ignimbrites, to the W). In the CW, the Upper Ucanca phonolitic Unit (1.4 Ma) could be the last main episode of the CE-II. Afterwards, the Cañadas III phase began. It is well represented in the CW sectors of Tigaiga (1.1 Ma–0.27 Ma), Las Pilas (1.03 Ma–0.78 Ma), Diego Hernández (0.54 Ma–0.17 Ma) and Guajara (1.1 Ma–0.7 Ma). The materials of this edifice are also found in the SE flank. These materials are trachybasaltic lava-flows and abundant phonolitic lava and pyroclastic flows (0.6 Ma–0.5 Ma) associated with abundant plinian falls. The CE-III was essentially built between 0.9 and 0.2 Ma, a period when the volcanic activity was also intense in the ‘Dorsal Edifice' situated in the easterly wing of Tenerife. The so called ‘valleys' of La Orotava and Güimar, transversals to the ridge axis, also formed during this period. In the central part of Tenerife, the CE-III completed its evolution with an explosive deposit resting on the top of the CE, for which ages from 0.173 to 0.13 Ma have been obtained. The CC age must be younger due to the fact that the present caldera scarp cuts these deposits. On the controversial origin of the CC (central vertical collapse vs. repeated flank failure and lateral collapse of mature volcanic edifices), the data discussed in this paper favor the second hypothesis. Clearly several debris-avalanche type events exist in the history of the volcano but most of the deposits are now under the sea. The caldera wall should represent the proximal scarps of the large slides whose intermediate scarps are covered by the more recent Teide-Pico Viejo volcanoes.     

Stereophotogrammetry of archive data and topographic approaches to debris‐flow torrent measurements: calculation of channel‐sediment states and a partial sediment budget for Manival torrent (Isère,France)

This paper focuses on a topographic methodology to characterize the amount of sediment stored in channels and the use of historical photographs for aerial survey by stereophotogrammetry, as part of wider research on debris‐flow magnitude prediction. The topographic methodology uses equidistant four‐point cross‐sections along the long profile of the channel. Each cross‐section is representative of a 50‐m reach of the channel. To calculate the volume of each reach, the difference is calculated between a reference level and the topographic surface. The reference level is the lowest level where the debris flow can erode, and in the current method this level is estimated from fixed points along the long profile of the channel. The accuracy of the method has been estimated by comparing results of a detailed topographic survey, with a standard deviation corresponding to about 6 per cent of the total calculated sediment volume. This topographic methodology has been used on aerial photographs by photogrammetry. This tool was applied to photographs taken on 12 past dates. The scales of the archive photographs used range from 1:3000 to 1:30 000, but results are consistent and permit us to calculate sediment states of the channel for different past dates with an uncertainty of about 6 per cent of the total volume. The application of the technique to the Manival debris‐flow torrent has permitted us to propose some partial sediment budgets and erosion‐rate estimates. Copyright © 2006 John Wiley & Sons, Ltd.     

The use of small‐format and low‐altitude aerial photos for the realization of high‐resolution DEMs in mountainous areas: application to the Super‐Sauze earthflow (Alpes‐de‐Haute‐Provence,France)

Geomorphologists have to make choices and compromises, as acquisition techniques of geometrical information are numerous, depending on the specific complexity of the targeted three‐dimensional objects and the requirements of the end user. This article presents the methodology and the results over a well known and documented site. This ready‐to‐use, low‐altitude, aerial photo methodology reveals itself to be a satisfying compromise between cost, accuracy and difficulty of implementation. The selected equipment package is light enough to enable a quick reaction to unexpected events and the tools and methods are competitive with field acquisition techniques. An evaluation has demonstrated a sub‐metric accuracy for the final result. Copyright © 2002 John Wiley & Sons, Ltd.