The origin of medium-K ankaramitic arc magmas from Lombok (Sunda arc, Indonesia): Mineral and melt inclusion evidence

High-calcium, nepheline-normative ankaramitic basalts (MgO > 10 wt.%, CaO/Al₂O₃ > 1) from Rinjani volcano, Lombok (Sunda arc, Indonesia) contain phenocrysts of clinopyroxene and olivine (Fo_85–92) with inclusions of spinel (Cr# 58–77) and crystallised melt. Olivine crystals have variable but on average low NiO (0.10–0.23 wt.%) and high CaO (0.22–0.35 wt.%) contents for their forsterite number. The CaO content of Fo_89–91 olivine is negatively correlated with the Al₂O₃ content of enclosed spinel (9–15 wt.%) and positively correlated with the CaO/Al₂O₃ ratios of melt inclusions (0.9–1.5). Major and trace element patterns of melt inclusions are similar to that of the host rock, indicating that the magma could have formed by accumulation of small batches of melt, with compositions similar to the melt inclusions. The liquidus temperature of the magma was  1275 °C, and its oxygen fugacity ≤ FMQ + 2.5. Correlations between K₂O, Zr, Th and LREE in the melt inclusions are interpreted to reflect variable degrees of melting of the source; correlations between Al₂O₃, Na₂O, Y and HREE are influenced by variations in the mineralogy of the source. The melts probably formed from a water-poor, clinopyroxene-rich mantle source.     

Modification of the subcontinental mantle beneath East Serbia: Evidence from orthopyroxene-rich xenoliths

Orthopyroxene-rich olivine websterite xenoliths (OWB₂) in Palaeogene basanites in East Serbia are mostly composed of tabular low-Al₂O₃ orthopyroxene (> 70 vol.%, Mg# 85–87) containing tiny Cr spinel inclusions. Orthopyroxene shows a slightly U-shaped primitive mantle-normalized trace element pattern with strong peaks at U and Pb, similar to that of orthopyroxene from normal regional peridotitic mantle. In between the orthopyroxenes are interstitial spaces composed of partially altered olivine (Mg# 85–87), clinopyroxene, Ti-rich spinel, Mg-bearing calcite, K-feldspar, apatite, ilmenite and relicts of a hydrous mineral. Clinopyroxene appears as selvages around orthopyroxene and as coarser euhedral crystals. Trace element patterns of the clinopyroxene selvages resemble those of adjacent orthopyroxene, whereas the coarser ones have flatter and more LREE- and LILE-enriched patterns, similar to that of metasomatic clinopyroxene. The OWB₂ xenoliths are interpreted as having formed in two stages. During Stage I orthopyroxene crystallized, along with some spinel, olivine and probably hydrous phase(s). This original OWB₂ lithology was a hydrous olivine-bearing orthopyroxenite that crystallised from subduction-related SiO₂-saturated, boninite-like magmas. During Stage II the interstitial minerals formed due to infiltration of a low-SiO₂, high-CaO and CO₂-rich external melt, accompanied by decomposition of original H₂O-bearing minerals. The calculated composition of the infiltrating liquid corresponds to a mafic alkaline melt similar to the basanitic host but more enriched in CO₂, LREE and LILE. Metasomatism is interpreted in terms of small degree melts related to the Palaeogene mafic alkaline magmatism.     

淮南煤田太原组铝质泥岩元素地球化学特征

华北聚煤盆地南缘淮南煤田晚石炭世-早二叠世太原组含煤岩系普遍沉积铝质泥岩,然而,对于多层铝质泥岩的形成条件及其地球化学特征尚未开展深入研究。在本次研究中,系统采集了淮南煤田张集煤矿补Y1钻孔岩心样品,采用XRF和ICP-OES、ICP-MS分别测试了主量元素和微量元素,对铝质泥岩地球化学特征及其地质成因进行分析。结果表明:不同层位的铝质泥岩来源于同一源区,铝土质泥岩可能受到了更强烈的红土化作用导致其明显偏离SiO₂/Al₂O₃和Fe₂O₃/Al₂O₃趋势线;Sr/Ba的结果表明铝质泥岩是在不稳定的海陆交互沉积环境下形成的,V/Cr和V/（V+Ni）的结果表明铝质泥岩是在贫氧到厌氧的沉积环境中形成的;综合主量元素和微量元素的结果,表明了不同层位铝质泥岩的母岩可能是附近古陆的中酸性火成岩,母岩风化产物经迁移至淮南地区沉积成岩。      

Mantle sources and crustal input as recorded in high-Mg Deccan Traps basalts of Gujarat (India)

Near-primitive picritic basalts in the northwestern Deccan Traps have MgO > 10 wt.% and consist of two groups (low-Ti and high-Ti) with markedly different incompatible element and Nd–Sr–Pb isotope characteristics. Many elemental characteristics of the low-Ti picritic basalts are similar to those of transitional or normal ocean ridge basalts. However, values of ratios like Ba/Nb (13–30) and Ce/Pb (4–11), and isotopic ratios (e.g., ε_Nd(t) + 0.3 to − 6.3, (²⁰⁷Pb/²⁰⁴Pb)_t 15.63–15.75 at (²⁰⁶Pb/²⁰⁴Pb)_t 18.19–18.84, δ¹⁸O_olivine as high as + 6.2‰) are far-removed from ocean-ridge-type values, indicating a significant contribution from continental crust. The crustal signature could represent crustal contamination of ascending magmas; alternatively, it could represent a minor component within the Indian lithospheric mantle of anciently subducted sedimentary material or fluids derived from subducted material. In contrast, the high-Ti picritic basalts are chemically and isotopically rather similar to recent shield lavas of the Réunion hotspot (e.g., ε_Nd(t) + 2 to + 4) and to volcanic rocks along the postulated pre-Deccan track of this hotspot in Pakistan. Neither type of picritic basalt is parental to the voluminous flows comprising the bulk of the Deccan Traps. However, many of the Deccan primary magmas could have been derived from mixtures of a high-Ti-type, Réunion-like source component and a component more similar to, or even more incompatible-element-depleted than, average ocean-ridge mantle.     

A laser-ablation ICP-MS study of Apollo 15 low-titanium olivine-normative and quartz-normative mare basalts

Apollo 15 low-Ti mare basalts have traditionally been subdivided into olivine- and quartz-normative basalt types, based on their different SiO₂, FeO, and TiO₂ whole-rock compositions. Previous studies have reconciled this compositional diversity by considering the olivine- and quartz-normative basalts as originating from different lunar mantle source regions. To provide new information on the compositions of Apollo 15 low-Ti mare basalt parental magmas, we report a study of major and trace-element compositions of whole rocks, pyroxenes, and other phases in the olivine-normative basalts 15016 and 15555 and quartz-normative basalts 15475 and 15499. Results show similar rare-earth-element patterns in pyroxenes from all four basalts. The estimated equilibrium parental-melt compositions from the trace-element compositions of pyroxenes are similar for 15016, 15555 and 15499. Additionally, an independent set of trace-element distribution coefficients has been determined from measured pyroxene and mesostasis compositions in sample 15499. These data suggest that fractional crystallization may be a viable alternative to compositional differences in the mantle source to explain the 25% difference in whole-rock TiO₂, and corresponding differences in SiO₂ and FeO between the Apollo 15 olivine- and quartz-normative basalts. In this model, the older (3.35 Ga) quartz-normative basalts, with lower TiO₂ experienced olivine, chromite, and Cr-ulvöspinel fractionation at ‘crustal levels’ in magma chambers or dikes, followed by limited near-surface mineral fractionation, within the lava flows. In contrast, the younger (3.25 Ga) olivine-normative basalts experienced only limited magmatic differentiation at ‘crustal-levels’, but extensive near-surface mineral fractionation to produce their evolved mineral compositions. A two-stage mineral-fractionation model is consistent with textural and mineralogical observations, as well as the mineral trace-element constraints developed by this study.     

Desert varnish and petroglyphs on sandstone – Geochemical composition and climate changes from Pleistocene to Holocene (Libya)

Desert varnish of pristine sandstone and petroglyph surfaces from Takabart Kabort (Naturalistic Bubaline Art School) and Alamas (Tanzina Art School) can be well classified by their (SiO₂+Al₂O₃):MnO₂, Al₂O₃:SiO₂, and P₂O₅:CaO ratios. Specific ratios are due to the occurrence of clay minerals like illite, kaolinite, smectite, and feldspar, quartz, carbonates like calcite and dolomite, manganese oxyhydroxides, and apatite. Their occurrence corresponds to the local origin and composition of the primary aeolian material.

In general, the analyzed desert varnish shows lamination patterns characterized by alternating MnO₂-rich and -poor layers (25 wt% MnO₂) at rather constant iron oxyhydroxide content (6 wt% Fe₂O₃). Varnish on non-engraved surfaces exhibits three MnO₂-rich layers, whereas varnish-coated petroglyphs reveal minor lamination patterns corresponding to the dating of petroglyphs by rock art. The older Naturalistic Bubaline Art School petroglyphs (about 6–4 ka BP) and the younger Tazina Art School petroglyphs (about 3.8–3 ka BP) contain only two and one MnO₂-rich layer, respectively. It is assumed that the occurrence of such microlaminations is caused by climate changes in North Africa. Three humid periods are discerned from the Terminal Pleistocene to Holocene in the literature. Such periods are suitable to induce manganese accumulation by biotic and abiotic processes. Accordingly, the distinct lamination patterns gained from this study verify the dating of petroglyphs by rock art. From another point of view, classification of the above petroglyphs may be provided by analyses of microlaminations independently on cultural historical aspects.     

Oxidized, magnetite-series, rapakivi-type granites of Carajás, Brazil: Implications for classification and petrogenesis of A-type granites

The varying geochemical and petrogenetic nature of A-type granites is a controversial issue. The oxidized, magnetite-series A-type granites, defined by Anderson and Bender [Anderson, J.L., Bender, E.E., 1989. Nature and origin of Proterozoic A-type granitic magmatism in the southwestern United States of America. Lithos 23, 19–52.], are the most problematic as they do not strictly follow the original definition of A-type granites, and approach calc-alkaline and I-type granites in some aspects. The oxidized Jamon suite A-type granites of the Carajás province of the Amazonian craton are compared with the magnetite-series granites of Laurentia, and other representative A-type granites, including Finnish rapakivi and Lachlan Fold Belt A-type granites, as well as with calc-alkaline, I-type orogenic granites. The geochemistry and petrogenesis of different groups of A-types granites are discussed with an emphasis on oxidized A-type granites in order to define their geochemical signatures and to clarify the processes involved in their petrogenesis. Oxidized A-type granites are clearly distinguished from calc-alkaline Cordilleran granites not only regarding trace element composition, as previously demonstrated, but also in their major element geochemistry. Oxidized A-type granites have high whole-rock FeO_t/(FeO_t + MgO), TiO₂/MgO, and K₂O/Na₂O and low Al₂O₃ and CaO compared to calc-alkaline granites. The contrast of Al₂O₃ contents in these two granite groups is remarkable. The CaO/(FeO_t + MgO + TiO₂) vs. CaO + Al₂O₃ and CaO/(FeO_t + MgO + TiO₂) vs. Al₂O₃ diagrams are proposed to distinguish A-type and calc-alkaline granites. Whole-rock FeO_t/(FeO_t + MgO) and the FeO_t/(FeO_t + MgO) vs. Al₂O₃ and FeO_t/(FeO_t + MgO) vs. Al₂O₃/(K₂O/Na₂O) diagrams are suggested for discrimination of oxidized and reduced A-type granites. Experimental data indicate that, besides pressure, the nature of A-type granites is dependent of ƒO₂ conditions and the water content of magma sources. Oxidized A-type magmas are considered to be derived from melts with appreciable water contents (≥ 4 wt.%), originating from lower crustal quartz-feldspathic igneous sources under oxidizing conditions, and which had clinopyroxene as an important residual phase. Reduced A-type granites may be derived from quartz-feldspathic igneous sources with a metasedimentary component or, alternatively, from differentiated tholeiitic sources. The imprint of the different magma sources is largely responsible for the geochemical and petrological contrasts between distinct A-type granite groups. Assuming conditions near the NNO buffer as a minimum for oxidized granites, magnetite-bearing granites formed near FMQ buffer conditions are not stricto sensu oxidized granites and a correspondence between oxidized and reduced A-type granites and, respectively, magnetite-series and ilmenite-series granites is not always observed.     

Lunar geochemistry as told by lunar meteorites

About 36 lunar meteorites have been found in cold and hot deserts since the first one was found in 1979 in Antarctica. All are random samples ejected from unknown locations on the Moon by meteoroid impacts. Lithologically and compositionally there are three extreme types: (1) brecciated anorthosites with high Al₂O₃ (26–31%), low FeO (3–6%), and low incompatible elements (e.g., <1 μg/g Th), (2) basalts and brecciated basalts with high FeO (18–22%), moderately low Al₂O₃ (8–10%) and incompatible elements (0.4–2.1 μg/g Th), and (3) an impact-melt breccia of noritic composition (16% Al₂O₃, 11% FeO) with very high concentrations of incompatible elements (33 μg/g Th), a lithology that is identified as KREEP on the basis of its similarity to Apollo samples of that designation. Several meteorites are polymict breccias of intermediate composition because they contain both anorthosite and basalt. Despite the large range in compositions, a variety of compositional parameters together distinguish lunar meteorites from terrestrial materials. Compositional and petrographic data for lunar meteorites, when combined with mineralogical and compositional data obtained from orbiting spacecraft in the 1990s, suggest that Apollo samples identified with the magnesian (Mg-rich) suite of nonmare rocks (norite, troctolite, dunite, alkali anorthosite, and KREEP) are all products of a small, geochemically anomalous (noritic, high Th) region of crust known as the Procellarum KREEP Terrane and are not, as generally assumed, indigenous to the vast expanse of typical feldspathic crust known as the Feldspathic Highlands Terrane. Magnesian-suite rocks such as those of the Apollo collection do not occur as clasts in the feldspathic lunar meteorites. The misconception is a consequence of four historical factors: (1) the Moon has long been viewed as simply bimodal in geology, mare or highlands, (2) one of the last, large basin-forming bolides impacted in the Procellarum KREEP Terrane, dispersing Th-rich material, (3) although it was not known at the time, the Apollo missions all landed in or near the anomalous Procellarum KREEP Terrane and collected many Th-rich samples formed therein, and (4) the Apollo samples were interpreted and models for lunar crust formation developed without recognition of the anomaly because global data provided by orbiting missions and lunar meteorites were obtained only years later.     

Basaltic magmatism on the Moon: A perspective from volcanic picritic glass beads

It is widely accepted that basaltic magmas are products of partial fusion of periodotite within planetary mantles. As such, they provide valuable insights into the composition, structure, and processes of planetary interiors. Those compositions which approach primary melt compositions provide the most direct information about planetary interiors and serve as a starting point to understand basaltic evolution. Within the collection of lunar samples returned by the Apollo and Luna missions are homogeneous, picritic glass beads of volcanic origin. These picritic glasses are our closest approximations to primary magmas. As such, these glass beads provide a unique perspective concerning the origin of mare basalts, the characteristics of the lunar interior, and processes in the early differentiation of the Moon. We have obtained trace element data for these picritic glasses using SIMS techniques. These data and literature isotopic and experimental data on the picritic glasses are placed within the framework of mare basaltic magmatism.The volcanic glasses are very diverse in their trace element characteristics, for example, they have a wide range of REE pattern shapes and concentrations. Like the crystalline mare basalts, all picritic glasses have a negative Eu anomaly. Unlike the crystalline mare basalts, there is little correlation between the size of the Eu anomaly and overall REE concentrations. Trace element differences among the various glasses suggests that a KREEP component was incorporated into their mantle source. This implies large scale mixing of the “Lunar Magma Ocean”-derived cumulate pile. Subtle differences among glasses suggest that local mixing of sources may also have been an important process. Preservation of subtle chemical differences in the picritic glasses and crystalline basalts may be interpreted as indicating that they were produced by small to moderate degrees of partial melting and that the lunar mantle did not experience extensive melting during episodes of mare volcanism.Several lines of evidence are consistent with the view that the picritic glasses were derived from mantle sources that were compositionally distinct from the sources for crystalline mare basalts. These are parallel, but no common, liquid lines of descent; chemical differences between picritic glasses and the more primitive crystalline mare basalts; experimental studies indicating that the picritic glasses are multiply saturated at depths greater than that of the mare basalts; differences in lead isotopic data; and the mode of eruption (i.e., fire fountaining for glass beads). These data also provide circumstantial evidence that suggests that the picritic glasses were derived from a source somewhat more volatile-rich than that of the mare basalts.Several petrogenetic models are suggested by the trace element characteristics of the picritic glasses:

• 1.(1) Partial melting of heterogeneous lunar mantle at depths greater than 300 km to produce the parental magmas (picritic) for both the mare basalts and picritic glasses. Picritic magmas represented by glass beads were erupted to the surface with small degrees of fractional crystallization while mare basalts were produced by larger degrees of fractional crystallization (15–30%) of similar (but not identical) picritic magmas.
• 2.(2) Picritic magmas represented by the glass beads were generated at depths greater than 400 km in a volatile-enriched (relative to the mare basalt source) heterogeneous mantle while mare basalts are fractional crystallization products of picritic magmas generated at depths of less than 400 km.
• 3.(3) The picritic magmas represented by the glass beads represent polybaric melting that initiated at depths of at least 1000 km. A primitive mantle component or less processed cumulate mantle components may have been involved in the generation of the picritic glasses in any of these models.

     

The stability and major element partitioning of ilmenite and armalcolite during lunar cumulate mantle overturn

Ilmenite has played an important role in the petrogenesis of lunar high-Ti picritic magmas, and armalcolite is another high-Ti oxide that was first discovered on the moon. In this study, we examined the thermodynamic stability of ilmenite and armalcolite in the context of lunar cumulate mantle overturn. Two starting compositions were explored, an ilmenite-bearing dunite (olivine + ilmenite) and an ilmenite-bearing harzburgite (olivine + orthopyroxene + ilmenite). Experiments were conducted using a 19.05 mm piston-cylinder apparatus at temperatures of 1235-1475 °C and pressures of 1-2 GPa. In runs with the ilmenite-bearing dunite mixture, ilmenite is stable in the subsolidus assemblage at least up to 1450 °C and 2 GPa. In runs with the ilmenite-bearing harzburgite starting mixture, ilmenite is stable at pressures greater than 1.4 GPa, and armalcolite is stable at lower pressures. Solidi for both starting compositions were determined, and the phase boundary between ilmenite- and armalcolite-bearing harzburgite was shown to have little dependence on temperature. During lunar cumulate overturn, sinking ilmenite formed near the end of lunar magma ocean solidification transforms into armalcolite when in contact with harzburgite cumulates at depths of less than 280 km in the lunar mantle. Inefficient overturn could leave isolated, inhomogeneously distributed pockets of armalcolite-bearing harzburgite in the upper lunar mantle, underlain by an ilmenite-bearing lower lunar mantle. These high-Ti oxide-bearing harzburgitic pockets can serve as potential sources for the generation of high-Ti magmas through partial melting or through assimilation of high-Ti minerals during transport of low-Ti picritic magmas in the lunar mantle.FeO-MgO exchange between olivine and either ilmenite or armalcolite was also examined in this study. We found the FeO-MgO distribution coefficient to be effectively independent of temperature for the pressures, temperatures, and compositions explored, with an average value of 0.179 ± 0.008 for olivine/ilmenite and 0.319 ± 0.021 for olivine/armalcolite. Given the bulk composition of an overturned lunar cumulate mantle, our measured FeO-MgO distribution coefficients can be used to estimate the Mg# of coexisting minerals in armalcolite- or ilmenite-bearing harzburgite and dunite in the overturned lunar mantle. Finally, the transformation from ilmenite-bearing harzburgite to armalcolite-bearing harzburgite results in a density increase of up to 2%. Large armalcolite-bearing cumulate bodies in the upper lunar mantle may be detectable in future lunar geophysical experiments.     

Occurrence and chemical composition of amphiboles and related minerals in corundum-bearing mafic rock from the Horoman Peridotite Complex, Japan

A corundum-bearing mafic rock in the Horoman Peridotite Complex, Japan, was derived from upper mantle conditions to lower crustal conditions with surrounding peridotites. The amphiboles found in the rock are classified into 3 types: (1) as interstitial and/or poikilitic grains (Green amphibole), (2) as a constituent mineral of symplectitic mineral aggregates with aluminous spinel at grain boundary between olivine and plagioclase (Symplectite amphibole) and (3) as film-shaped thin grains, usually less than 10 μm in width, at grain boundary between olivine and clinopyroxene (Film-shaped amphibole). The Film-shaped amphibole is rarely associated with orthopyroxene extremely low in Al₂O₃, Cr₂O₃ and CaO (Low-Al OPX). These minerals were formed by infiltration of SiO₂- and volatile-rich fluids along grain boundaries after the rock was recrystallized at olivine-plagioclase stability conditions, i.e. the late stage of the exhumation of the Horoman Complex.

Chondrite-normalized rare earth element patterns and primitive mantle-normalized trace-element patterns of the Green amphibole and clinopyroxene are characterized by LREE-depleted patterns with Eu positive and negative anomalies of Zr and Hf. These geochemical characteristics of the constituent minerals were inherited from original whole-rock compositions through a reaction involving both pre-existing clinopyroxene and plagioclase. We propose that the fluids were originally rich in a SiO₂ component but depleted in trace-elements. Dehydration of the surrounding metamorphic rocks in the Hidaka metamorphic belt, probably related to intrusion of hot peridotite body into the Hidaka crust, is a plausible origin for the fluids.     

Mineral phase compositions in silica-undersaturated ‘leucite’ lamproites from the Bucak area, Isparta, SW Turkey

Ultrapotassic rocks in the Bucak area of Isparta Angle, SW Turkey, show unusually low SiO₂ (46.8–49.2 wt.%) and high MgO (10.4–11.6 wt.%) contents, and lamproitic affinity (K/Na, > 2.5; Mg#, 73–75; Al₂O₃, 9.2–11 wt.%, CaO 7.4–10.6 wt.%, Cr, 525–675 ppm; Ni, 442–615 ppm). They are made up by phlogopite (30–40 vol.%), leucite (25–30 vol.%), olivine (5–20 vol.%), which rarely contain Cr-spinel, clinopyroxene (5–10 vol.%), sanidine (5 vol.%) and richterite, with accessory apatite, magnetite and ilmenite. One sample also include negligible sodalite in groundmass, which is unusual mineral in lamproites. Mineral phase variation and textures record discrete phases of pre-eruptive crystallization: (1) early appearance of (Cr-spinel-bearing) olivine, Ti poor phlogopite ± apatite at pressures of ca. 1.0–2.0 GPa, at or close to the lithospheric Mechanical Boundary Layer (MBL), and (2) later appearance of Ti rich phlogopite, clinopyroxene, richterite, leucite, sanidine, and other minor phases, at pressures of ca. 0.1–1.0 GPa, indicating discrete, pressure-specific fractionation events. The Bucak silica poor ‘leucite’ lamproites were probably generated by partial melting of phlogopite-bearing, refractory peridotite at pressures of ca. 1.5–2 GPa, higher than those proposed for SiO₂-saturated ‘phlogopite’ lamproites (ca. 1–1.5 GPa) from Afyon, to the North. The depth (total pressure) of melt segregation probably dominates over volatile partial pressures (e.g. of CO₂, F, H₂O) in determining the SiO₂-undersaturated character of Bucak magmas.     

The nature of the sub-continental mantle: constraints from the major-element composition of continental flood basalts

Many continental flood basalts (CFB) have isotope and trace-element signatures that differ from those of oceanic basalts and much interest concerns the extent to which these reflect differences in their upper mantle source regions. A review of selected data sets from the Mesozoic and Tertiary CFB confirms significant differences in their major- and trace-element compositions compared with those of basalts erupted through oceanic lithosphere. In general, those CFB suites characterised by low Nb/La, high (⁸⁷Sr/⁸⁶Sr)_i and low εNd_i tend to exhibit relatively low TiO₂, CaO/Al₂O₃, Na₂O and/or Fe₂O₃, and relatively high SiO₂. In contrast, those which have high Nb/La, low (⁸⁷Sr/⁸⁶Sr)_i and high εNd_i ratios, like the upper units in the Deccan Traps, have major- and trace-element compositions similar to oceanic basalts. It would appear that those CFB that have distinctive isotope and trace-element ratios also exhibit distinctive major-element contents, suggesting that major and trace elements have not been decoupled significantly during magma generation and differentiation.

When compared (at 8% MgO) with oceanic basalt trends, the displacement of many CFB to lower Na₂O, Fe₂O₃^*, TiO₂ and CaO/Al₂O₃, but higher SiO₂, at similar Mg#, is not readily explicable by crustal contamination. Rather, it reflects source composition and/or the effects of the melting processes. The model compositions of melts produced by decompression of mantle plumes beneath continental lithosphere have relatively low SiO₂ and high Fe₂O₃^*. In contrast, the available experimental data indicate that partial melts of peridotite have low TiO₂, Na₂O and Fe₂O₃^*CaO/Al₂O₃, if the peridotite has been previously depleted by melt extraction. Moreover, melting of hydrated, depleted peridotite yields SiO₂-rich, Fe₂O₃- and CaO-poor melts. Since anhydrous, depleted peridotite has a high-temperature solidus, it is argued that the source of these CFB was variably melt depleted and hydrated mantle, inferred to be within the lithosphere. Isotope data suggest these source regions were often old and relatively enriched in incompatible trace elements, and it is envisaged that H₂O±CO₂ were added at the same time as the incompatible elements. An implication is that a significant proportion of the new continental crust generated since the Permian reflected multistage processes involving mobilization of continental mantle lithosphere that was enriched in minor and trace elements during the Proterozoic.     

Petrogenetic processes in the ultramafic, alkaline and carbonatitic magmatism in the Kola Alkaline Province: A review

Igneous rocks of the Devonian Kola Alkaline Carbonatite Province (KACP) in NW Russia and eastern Finland can be classified into four groups: (a) primitive mantle-derived silica-undersaturated silicate magmas; (b) evolved alkaline and nepheline syenites; (c) cumulate rocks; (d) carbonatites and phoscorites, some of which may also be cumulates. There is no obvious age difference between these various groups, so all of the magma-types were formed at the same time in a relatively restricted area and must therefore be petrogenetically related. Both sodic and potassic varieties of primitive silicate magmas are present. On major element variation diagrams, the cumulate rocks plot as simple mixtures of their constituent minerals (olivine, clinopyroxene, calcite, etc). There are complete compositional trends between carbonatites, phoscorites and silicate cumulates, which suggests that many carbonatites and phoscorites are also cumulates. CaO / Al₂O₃ ratios for ultramafic and mafic silicate rocks in dykes and pipes range up to 5, indicating a very small degree of melting of a carbonated mantle at depth. Damkjernites appear to be transitional to carbonatites. Trace element modelling indicates that all the mafic silicate magmas are related to small degrees of melting of a metasomatised garnet peridotite source. Similarities of the REE patterns and initial Sr and Nd isotope compositions for ultramafic alkaline silicate rocks and carbonatites indicate that there is a strong relationship between the two magma-types. There is also a strong petrogenetic link between carbonatites, kimberlites and alkaline ultramafic lamprophyres. Fractional crystallisation of olivine, diopside, melilite and nepheline gave rise to the evolved nepheline syenites, and formed the ultramafic cumulates. All magmas in the KACP appear to have originated in a single event, possibly triggered by the arrival of hot material (mantle plume?) beneath the Archaean/Proterozoic lithosphere of the northern Baltic Shield that had been recently metasomatised. Melting of the carbonated garnet peridotite mantle formed a spectrum of magmas including carbonatite, damkjernite, melilitite, melanephelinite and ultramafic lamprophyre. Pockets of phlogopite metasomatised lithospheric mantle also melted to form potassic magmas including kimberlite. Depth of melting, degree of melting and presence of metasomatic phases are probably the major factors controlling the precise composition of the primary melts formed.     

Exsolution textures in orthopyroxene in aluminous granulites as indicators of UHT metamorphism: New evidence from the Eastern Ghats Belt, India

Highly aluminous orthopyroxene, coexisting with sapphirine, cordierite, sillimanite, quartz and garnet in various combinations, constitute granoblastic mosaic peak metamorphic assemblages in aluminous granulites from three localities in the Eastern Ghats Belt, India. Orthopyroxene contains four types of intergrowths: (a) involving sapphirine with or without cordierite, (b) involving spinel, but without sapphirine, (c) involving cordierite, but without sapphirine and spinel, and (d) involving garnet, without sapphirine, spinel or cordierite. On the basis of textural and compositional data, origin of the intergrowths is ascribed to breakdown of Mg-Tschermak component, locally also involving Fe- and Ti-Tschermak. An attempt is made to compute the “pre-breakdown” compositions of orthopyroxene by image analysis, which shows maximum Al₂O₃ content of 13.4 wt.% in the pristine orthopyroxene. Geothermometry, phase equilibria consideration and application of existing experimental data on alumina solubility in orthopyroxene coexisting with sapphirine and quartz, collectively indicate extreme thermal conditions of metamorphism (> 1000 °C) for the studied assemblages. This re-affirms the notion that Al₂O₃ solubility in orthopyroxene is the most powerful indicator of UHT metamorphism (Harley, S.L., 2004. Extending our understanding of ultrahigh temperature crustal metamorphism. J. Mineral. Petrol. Sci. 99, 140–158). The intergrowths are considered to have formed due to cooling from the thermal peak spanning a temperature range of approximately 150 °C. Appearance of diverse types of intergrowths is probably related to subtle differences in bulk composition, particularly Fe:Mg ratios.     

Dunite, Glimmerite and Spinellite in Achankovil Shear Zone, South India: Implications for Highly Potassic CO2-rich Melt Influx Along an Intra-continental Shear Zone

In the Kakkaponnu area within the Achankovil Shear Zone (ACSZ), southern India, an undeformed ultramafic body occurs within intensely deformed granulite facies metamorphic rocks of Pan-African age. The Kakkaponnu ultramafic body is composed of spinel-dunite, phlogopite-dunite, glimmerite, graphite-spinel-glimmerite, and phlogopite-graphite-spinellite. The spinel-dunite is a fine- to medium-grained rock composed mainly of olivine and aluminous spinel and is characterized by relatively high MgO (50.39–50.90 wt.%), (Mg/ (Mg+Fe) = 0.95), Al₂O₃ (7.8–8.98 wt.%), and low Ni (10–14 ppm). The phlogopite-dunite comprises serpentinized olivine, phlogopite and subordinate amounts of dolomite and is high in MgO (36.5 wt.%), Mg# [(Mg/(Mg+Fe) = 0.97], and K₂O (%%5.5 wt.%). Olivine in the spinel-dunite is marked by unusually high MgO (Mg# = 0.96) and extremely low NiO (<0.14 wt.%). Spinels in all rock variants are highly aluminous with low Cr# [Cr/(Al+Cr)] ratio (<0.01). Magnesian ilmenite [Mg# = 59], rutile, zirconolite and baddeleyite are main accessory phases. No significant compositional variation is noted between large grains and small inclusions for all minerals. Abundant graphite, magnesite, melt and ubiquitous CO₂ fluid inclusions are identified in the olivine and spinel grains. The data imply that the Kakkaponnu ultramafic body was formed by progressive crystallization of highly potassic CO₂-rich melts injected into lower crustal levels. K-Ar ages of 470.5±9.3 and 464.5±9.2 Ma are obtained for phlogopite separates from glimmerite and phlogopite-dunite respectively. These ages are comparable to the phlogopite K-Ar ages reported from lithospheric shear zones in southern Madagascar, which was once conjugated to the Southern Peninsular India prior to the Gondwana breakup. This implies widespread highly potassic CO₂-rich fluid/melt influx along shear zones in this part of East Gondwana continent.     

南海北部中央峡谷水道的岩相-地球化学特征及其源区性质

峡谷水道是南海北部琼东南盆地深水区主要储集层,乐东-陵水凹陷黄流组储集岩以粉、细砂岩为主,储层物性好.然而目前针对不同期水道主要物源供给及水道形成的母岩区性质、古风化程度等研究甚少.对中央峡谷西段水道的砂泥岩进行了岩石薄片与重矿物成分观察统计、岩石主量、微量/稀土元素分析,结果表明:岩石类型以岩屑石英砂岩和长石岩屑砂岩为主,崖城、陵水区重矿物分别为磁铁矿、白钛矿、锆石、电气石与白钛矿、石榴石、电气石、锆石的组合;地球化学特征表现为泥岩较砂岩SiO₂含量低,Fe₂O₃、MgO、K₂O、稀土含量偏高,与其含有高粘土矿物有关.砂、泥岩Al₂O₃/TiO₂、K₂O/Al₂O₃、K₂O/Na₂O比值说明物源区富石英、贫钾长石,分别为石英质沉积与中性火成岩源区;砂岩较泥岩具有较高SiO₂/Al₂O₃比值、低ICV、CIA、CIW值,表明源区经历了低-中等程度的风化作用,是稳定构造环境再循环沉积而成,泥岩的形成环境较砂岩动荡.      

Circumstellar aluminum oxide and silicon carbide in interplanetary dust particles

A systematic NanoSIMS isotope imaging study of sub-micrometer phases in interplanetary dust particles (IDPs) has led to the discovery of two presolar grain types that previously were observed only in primitive meteorites. A 350 × 600 nm² Al₂O₃ grain has a large ¹⁷O enrichment and a slight ¹⁸O depletion, as well as a ²⁶Mg excess due to the decay of extinct ²⁶Al. Because of its relatively large size and prominent location within the IDP, this presolar Al₂O₃ grain is well characterized by SEM-EDX analyses. A second, much smaller presolar grain has a diameter of 150 nm and a ¹³C enrichment of more than 300%. Isotopic anomalies in C are rarely found in IDPs and the magnitude of this anomaly is unprecedented. This grain also has a ¹⁵N-rich composition and its isotopic makeup as well as its secondary ion yields identify it as a SiC grain. The discovery of presolar Al₂O₃ and SiC in IDPs seamlessly complements earlier notions of interplanetary dust particles as the most primitive extraterrestrial material currently available for laboratory analysis. Both Al₂O₃ and SiC are common presolar grain types in primitive meteorites, but they appeared conspicuously absent from the presolar grain inventory in interplanetary dust particles, which is dominated by silicate stardust. Not finding these presolar grain types in interplanetary dust would have been difficult to explain. Abundance estimates of the new presolar grain types in IDPs are hampered by limited statistics, but both Al₂O₃ and SiC are less common than presolar silicates which have been found at relatively high abundances in IDPs. The particle in which these presolar grains have been found belongs to the ‘isotopically primitive subgroup’ of IDPs, yet does not contain any presolar silicates.     

Torngat ultramafic lamprophyres and their relation to the North Atlantic Alkaline Province

Geological mapping and diamond exploration in northern Quebec and Labrador has revealed an undeformed ultramafic dyke swarm in the northern Torngat Mountains. The dyke rocks are dominated by an olivine-phlogopite mineralogy and contain varying amounts of primary carbonate. Their mineralogy, mineral compositional trends and the presence of typomorphic minerals (e.g. kimzeyitic garnet), indicate that these dykes comprise an ultramafic lamprophyre suite grading into carbonatite. Recognized rock varieties are aillikite, mela-aillikite and subordinate carbonatite. Carbonatite and aillikite have in common high carbonate content and a lack of clinopyroxene. In contrast, mela-aillikites are richer in mafic silicate minerals, in particular clinopyroxene and amphibole, and contain only small amounts of primary carbonate. The modal mineralogy and textures of the dyke varieties are gradational, indicating that they represent end-members in a compositional continuum.

The Torngat ultramafic lamprophyres are characterized by high but variable MgO (10–25 wt.%), CaO (5–20 wt.%), TiO₂ (3–10 wt.%) and K₂O (1–4 wt.%), but low SiO₂ (22–37 wt.%) and Al₂O₃ (2–6 wt.%). Higher SiO₂, Al₂O₃, Na₂O and lower CO₂ content distinguish the mela-aillikites from the aillikites. Whereas the bulk rock major and trace element concentrations of the aillikites and mela-aillikites overlap, there is no fractional crystallization relation between them. The major and trace element characteristics imply related parental magmas, with minor olivine and Cr-spinel fractionation accounting for intra-group variation.

The Torngat ultramafic lamprophyres have a Neoproterozoic age and are spatially and compositionally closely related with the Neoproterozoic ultramafic lamprophyres from central West Greenland. Ultramafic potassic-to-carbonatitic magmatism occurred in both eastern Laurentia and western Baltica during the Late Neoproterozoic. It can be inferred from the emplacement ages of the alkaline complexes and timing of Late Proterozoic processes in the North Atlantic region that this volatile-rich, deep-seated igneous activity was a distal effect of the breakup of Rodinia. This occurred during and/or after the rift-to-drift transition that led to the opening of the Iapetus Ocean.     

伊通新生代玄武岩地球化学成分差异性研究

伊通火山群中的西尖山((21.0±0.65) Ma)和东小山玄武岩((5.46±0.32) Ma)的岩石学和地球化学研究表明,两处玄武岩均为OIB型,岩浆来源于软流圈地幔,地壳混染与结晶分异的程度微弱。西尖山火山岩为碱性橄榄玄武岩,不含地幔岩捕虏体,岩浆起源深度为70~100 km,SiO2、Al₂O₃、Na₂O含量较高,属钠质碱性岩;东小山火山岩为碧玄岩,含较多的地幔橄榄岩捕虏体,岩浆来源深度大于100 km,MgO、TiO₂、CaO、K2O含量较高,属钾质过碱性岩。岩浆来源深度的不同是造成两处玄武岩化学成分差异的主要原因。