Energy spectra of gamma-ray bursts detected by the APEX experiment on phobos mission

Molecular clouds are clumpy on length scales down to the limits of observational resolution. At least some ultracompactHii regions (UCHiiR) may result from the interaction of a young early type star and this type of cloud. The clumps can act as reservoirs of ionized gas distributed within theHii region. These models reproduce the relatively long lifetimes implied by the population statistics of UCHiiR. We present line profile and emission measure plots based on the simplest case where the flow remains supersonic through to a recombination front. The morphology agrees with the shell-like UCHiiR as classified by Churchwell. The predicted line profiles are broad and double peaked with a separation of about 50 km s^–1 for the example given.     

Scattering properties of planetary regolith analogs

The physics of scattering of electromagnetic waves by media in which the particles are in contact, such as planetary regoliths, has been thought to be relatively well understood when the particles are larger than the wavelength. However, this is not true when the particles are comparable with or smaller than the wavelength. We have measured the scattering parameters of planetary regolith analogs consisting of suites of well-sorted abrasives whose particles ranged from larger to smaller than the wavelength. We measured the variation of reflectance as the phase angle varied from 0.05° to 140°. The following parameters of the media were then deduced: the single scattering albedo, single scattering phase function, transport mean free path, and scattering, absorption, and extinction coefficients. A scattering model based on the equation of radiative transfer was empirically able to describe quantitatively the variation of intensity with angle for each sample. Thus, such models can be used to characterize scattering from regoliths even when the particles are smaller than the wavelength. The scattering parameters were remarkably insensitive to particle size. These results are contrary to theoretical predictions, but are consistent with earlier measurements of alumina abrasives that were restricted to small phase angles. They imply that a basic assumption made by virtually all regolith scattering models, that the regolith particles are the fundamental scattering units of the medium, is incorrect. Our understanding of scattering by regoliths appears to be incomplete, even when the particles are larger than the wavelength.     

Determination of the surface-averaged composition of the regolith of phobos by measurements of the secondary ion flux during the <Emphasis Type="Italic">Phobos-Grunt</Emphasis> mission in the MANAGA-F experiment

The onboard time-of-flight mass reflectron MANAGA-F is described which is aimed at measuring the elemental and isotopic composition of the secondary ion fluxes generated under the influence of solar wind. It is shown that by using this apparatus, the composition of the surface regolith layer averaged over a considerable area can be determined while approaching Phobos. After the landing of the spacecraft on the surface of Phobos, the measurements will be aimed at examining the local characteristics of the regolith and a new mechanism for water synthesis in the process of ion collisions. The apparatus allows for the mass of the secondary molecular ions to be detected and determined, including organic ones which arise during the bombardment of the regolith by ions of different origins. The main scientific problems to be solved using the given apparatus are considered in the paper. The working principle of the apparatus together with its analytical and technical characteristics and design particularities are presented. Information concerning the range of its applications for solving a number of challenging tasks of contemporary science is given. The MANAGA-F apparatus is shown to be the first realization of an original new-generation onboard device that has been invented, developed, and produced at the Space Research Institute of the Russian Academy of Sciences (SRI RAS).     

Planned earth-based studies of the phobos material

The article describes scientific challenges in the analysis of the Phobos material that is to be returned in the Russian Phobos-Grunt space mission. Their close connection with current problems in studies of the Earth and the origin of life has been demonstrated. The most obvious up-to-date studies that are to be carried out under laboratory conditions after the soil sample is delivered to Earth are specified, and the required equipment listed.     

Temperatures and thermophysical properties of the lunar outermost layer

Comparisons of calculated diurnal and eclipse temperatures of the lunar outermost layer are made with Earth-based infrared and millimeter data. The thermophysical model upon which the calculations are based incorporates variable physical properties. The thermal conductivity is a function of both density (depth) and temperature; the specific heat is a function of temperature; the density is a function of depth; and the dielectric constant and loss tangent are functions of density (depth). Laboratory measurements and Apollo sample results are incorporated in the property data. Calculational cases are based largely upon different density profiles. The model is consistent with the data, and the comparisons of theoretical and observational temperatures are very favorable. For such comparisons, further sophistication of the thermophysical model of the outermost layer is probably not justified.     

Evidence of space weathering in regolith breccias I: Lunar regolith breccias

Abstract— We have analyzed a suite of lunar regolith breccias in order to assess how well space weathering products can be preserved through the lithification process and therefore whether or not it is appropriate to search for space weathering products in asteroidal regolith breccia meteorites. It was found that space weathering products, vapor/sputter deposited nanophase‐iron‐bearing rims in particular, are easily identified in even heavily shocked/compacted lunar regolith breccias. Such rims, if created on asteroids, should thus be preserved in asteroidal regolith breccia meteorites. Two additional rim types, glass rims and vesicular rims, identified in regolith breccias, are also described. These rims are common in lunar regolith breccias but rare to absent in lunar soils, which suggests that they are created in the breccia‐forming process itself. While not “space weathering products” in the strictest sense, these additional rims give us insight into the regolith breccia formation process. The presence or absence of glass and/or vesicular rims in asteroidal regolith breccias will likewise tell us about environmental conditions on the surface of the asteroid body on which the breccia was created.     

Evidence of space weathering in regolith breccias II: Asteroidal regolith breccias

Abstract– Space weathering products, such as agglutinates and nanophase iron‐bearing rims are easily preserved through lithification in lunar regolith breccias, thus such products, if produced, should be preserved in asteroidal regolith breccias as well. A study of representative regolith breccia meteorites, Fayetteville (H4) and Kapoeta (howardite), was undertaken to search for physical evidence of space weathering on asteroids. Amorphous or npFe⁰‐bearing rims cannot be positively identified in Fayetteville, although possible glass rims were found. Extensive friction melt was discovered in the meteorite that is difficult to differentiate from weathered materials. Several melt products, including spherules and agglutinates, as well as one irradiated rim and one possible npFe⁰‐bearing rim were identified in Kapoeta. The existence of these products suggests that lunar‐like space weathering processes are, or have been, active on asteroids.     

Nitrogen and argon release profiles in Luna 16 and Luna 24 regolith samples: The effects of regolith reworking

Abstract— Fines, microbreccias and agglutinates from the Luna 16 mature regolith 1635 and fines from the immature/submature Luna 24 regolith have been analysed for N and argon isotopes in order to understand the origin of isotopically distinct N released at different temperatures. All high‐resolution runs reveal a similarity in the release of ³⁶Ar, ⁴⁰Ar and N over a wide temperature interval. The similarity in the ⁴⁰Ar and ³⁶Ar releases and the near coincidence in the 1635 agglutinates implies that the implanted species were redistributed and homogenised during regolith processing such that, regardless of the huge difference in ion implantation energy between solar ³⁶Ar and non‐solar ⁴⁰Ar, their present distribution and their release temperatures are now essentially equal. A small amount of ⁴⁰Ar released in the lower temperature steps with elevated ⁴⁰Ar/³⁶Ar is considered to be trapped after reworking. While such mixing and homogenisation may also be expected for N components of different origins, to date all known stepped runs regularly demonstrate a reproducible variation in δ¹⁵N, suggesting no homogenisation. We consider regolith N to be a mixture of several components trapped at different times, and some nitrogen that was not involved in the reworking. Relatively heavy N released around 500 °C appears to be the most pure form of the component trapped after reworking, probably from accreted meteoritic matter. Middle‐temperature isotopically lighter N appears to be a mixture of solar and non‐solar N largely homogenised, and therefore solar N can not be seen in its pure form. Bulk δ¹⁵N as well as formally deconvoluted δ¹⁵N thermal profiles imply that the non‐solar N has a variable δ¹⁵N value. Several non‐solar N sources are considered with their input resulting in increasing regolith δ¹⁵N with time. Because N from meteorites and interplanetary dust particles appear to be dominant, a mechanism is required to reduce the C/N ratio typical of meteoritic matter to that approaching the low value observed in the lunar regolith. Preferential loss of methane appears to be a viable explanation, following generation either by proton sputtering or in reducing vapour plumes.     

The Kapoeta howardite: Implications for the regolith evolution of the howardite-eucrite-diogenite parent body

Abstract— A large hand sample and numerous polished thin sections, made from the hand sample, of the Kapoeta howardite and its many diverse lithic clasts were studied in detail by optical microscopy and electron microprobe techniques in an attempt to understand the surface processes that operated on the howardite-eucrite-diogenite (HED) parent body (most likely the asteroid 4 Vesta). Four unique, unusually large clasts, designated A (mafic breccia), B (granoblastic eucrite), D (howardite) and H (melt-coated breccia), were selected for detailed study (modal analysis, mineral microprobe analysis, and noble gas measurements). Petrographic studies reveal that Kapoeta consists of a fine-grained matrix made mostly of minute pyroxene and plagioclase fragments, into which are embedded numerous different lithic and mineral clasts of highly variable sizes. The lithic clasts include pyroxene-plagioclase (eucrite), orthopyroxenite (diogenite), howardite, impact-melt, metal-sulfide-rich, and carbonaceous chondrite clasts. The howardite clasts include examples of lithic clasts that constitute breccias-within-breccias, suggesting that at least two regolith generations are represented in the Kapoeta sample we studied. The clast assemblage suggests that repeated shock lithification was an important process during regolith evolution. Noble gas analyses of clast samples fall into two populations: (a) solar-gas-rich clasts H (rim only) and D and (b) clasts A and B, which are essentially free of solar gases. The concentrations of solar noble gases in the two matrix samples differ by a factor of ～40. It appears that clast D is a true regolith breccia within the Kapoeta howardite (breccia-within-breccia), while clast H is a regolith breccia that has been significantly impact reworked. Our data indicate that the Kapoeta howardite is an extraordinarily heterogeneous rock in modal mineral and lithic clast abundances, grain size distributions, solar-wind noble gas concentrations and cosmic-ray exposure ages. These results illustrate the repetitive nature of impact comminution and lithification in the regolith of the HED parent body.     

Development of the mare regolith: Some model considerations

Mare regolith is fragmental debris of variable thickness that lies upon fractured bedrock. Its origin by impact comminution of primarily local basaltic rocks is widely accepted, but the consequences of such an origin are not appreciated fully. This investigation uses results obtained in an earlier Monte Carlo study by Oberbecket al. (1973) to shed light on those consequences by evaluating regolith growth and mixing as a function of time. Results reported are for average cases and must be used with caution. Each small area of the lunar surface has experienced a unique history and results based on averages may have no application to specific cases. Consideration of average processes is useful, nevertheless, when this limitation is kept in mind. The study demonstrates that regolith growth is self regulated and has the same trend and nearly the same terminal growth rates whatever the history of bombardment: rapid initial accumulation followed by diminishing rates of growth. Mixing and all other processes investigated are growth regulated. Mixing increases as growth slows, but never to the extent that the regolith is homogenized. Because the average regolith is never homogenized, products of growth regulated processes are preserved in the stratigraphy. Differences in material properties are to be expected in vertical sections of the regolith, therefore, but this model is not sufficiently refined to permit prediction of all possible trends. It does indicate, however, that deeper levels contain thinner depositional units, lesser quantities of meteoritic and exotic components, and more debris derived from shallow levels in the mare basalts than material in near surface layers. Additionally, neutron fluence production is regulated by the growth process, but because rates of growth do not differ much over the last aeon, whatever the total age or early bombardment history, values of surface fluence may be similar in many areas whatever their age.     

Surface thermophysical properties on the potentially hazardous asteroid (99942) Apophis

We investigate the surface thermophysical properties(thermal emissivity, thermal inertia,roughness fraction and geometric albedo) of asteroid(99942) Apophis, using the currently available mid-infrared observations from CanariC am on Gran Telescopio CANARIAS and far-infrared data from PACS on Herschel, based on the Advanced Thermophysical Model. We show that the thermal emissivity of Apophis should be wavelength dependent from 8.70 μm to 160 μm, and the maximum emissivity may appear around 20 μm, similar to that of Vesta. Moreover, we further derive the thermal inertia,roughness fraction, geometric albedo and effective diameter of Apophis within a possible 1σ scale of Γ = 100_(-52)~(+100)+Jm~(-2)s~(-0.5)K~(-1), f_r = 0.78~1.0, p_v = 0.286_(-0.026)~(+0.030) and D_(eff) = 378_(-25)~(+19)m, and 3σscale of Γ = 100_(-100)~(+240)Jm~(-2)s~(-0.5) K~(-1), f_r = 0.2~1.0, p_v = 0.286_(-0.029)~(+0.039) and D_(eff) = 378_(-29)~(+27) m. The derived low thermal inertia but high roughness fraction may imply that Apophis could have regolith on its surface, where stronger space weathering but weaker regolith migration has happened in comparison with asteroid Itokawa. Our results show that small-size asteroids could also have fine regolith on the surface, and further infer that Apophis may have been delivered from the Main Belt by the Yarkovsky effect.     

The strength of regolith and rubble pile asteroids

We explore the hypothesis that, due to small van der Waals forces between constituent grains, small rubble pile asteroids have a small but nonzero cohesive strength. The nature of this model predicts that the cohesive strength should be constant independent of asteroid size, which creates a scale dependence with relative strength increasing as size decreases. This model counters classical theory that rubble pile asteroids should behave as scale‐independent cohesionless collections of rocks. We explore a simple model for asteroid strength that is based on these weak forces, validate it through granular mechanics simulations and comparisons with properties of lunar regolith, and then explore its implications and ability to explain and predict observed properties of small asteroids in the NEA and Main Belt populations, and in particular of asteroid 2008 TC₃. One conclusion is that the population of rapidly rotating asteroids could consist of both distributions of smaller grains (i.e., rubble piles) and of monolithic boulders.     

Properties of the Hermean regolith: I. Global regolith albedo variation at 200 km scale from multicolor CCD imaging

Multicolor imaging of Mercury has been performed with the 0.5 m Swedish Vacuum Solar Telescope (SVST) on La Palma at five elongations from 1995 to 1999, resulting in a global Minnaert normalized map of the surface at 200 km resolution. Short exposure CCD imaging has been performed in the optical and near-infrared with broad- and intermediate band filters at wavelengths from 550 to 940 nm. Positions for 86 and morphological parameters for 63 bright albedo features on the Hermean surface have been determined. The distribution of bright albedo features is shown to be spatially uniform on the well known (i.e., observed by Mariner 10) and poorly known hemispheres, as well as for the global surface. The number densities of bright albedo features on the two hemispheres are very similar. This indicates that the late evolutionary history of the Hermean regolith has not varied on regional to global scales in terms of impacts generating bright ray craters, constituting approximately 70% of the detected bright albedo features. The locations of bright albedo features correspond well to those determined from nominal resolution and smeared (to the approximate resolution of the SVST data) Mariner 10 maps. Feature parameters (radius, center intensity and intensity gradient) have been determined and correlated with the geologic nature of a subset of observed features imaged by the Mariner 10 Vidicon camera. No difference in feature properties is apparent between the poorly known and well known hemispheres. Based on a comparitive study of Mariner 10 image data, ray craters tend to have higher center intensities and smaller intensity gradients than bright albedo features which are not ray craters. It is however concluded that it is not possible to uniquely determine the geologic nature of features with a high statistical significance, based on their morphological parameters at 200 km resolution. We do not find any general correlation between the locations of radar-bright and optically bright or dark albedo features. The surface contrast decreases from 35% to 25% over the wavelength range 550–940 nm. The range of feature contrasts is similar for all surface regions, except for the ray crater Kuiper, whose contrast to the mean surrounding surface is 50% at a wavelength of 750 nm. Kuiper is an extreme albedo feature also in terms of its center intensity and slope. The mean value of the Minnaert slope parameter for the global surface is determined to 0.76±0.10. A measured constant value of the Minnaert slope with wavelength indicates that the spectral slope for typical Hermean regolith should be linear over the wavelength range 550–940 nm.     

The regolith portion of the lunar meteorite Sayh al Uhaymir 169

Abstract— –Sayh al Uhaymir (SaU) 169 is a composite lunar meteorite from Oman that consists of polymict regolith breccia (8.44 ppm Th), adhering to impact‐melt breccia (IMB; 32.7 ppm Th). In this contribution we consider the regolith breccia portion of SaU 169, and demonstrate that it is composed of two generations representing two formation stages, labeled II and III. The regolith breccia also contains the following clasts: Ti‐poor to Ti‐rich basalts, gabbros to granulites, and incorporated regolith breccias. The average SaU 169 regolith breccia bulk composition lies within the range of Apollo 12 and 14 soil and regolith breccias, with the closest correspondence being with that of Apollo 14, but Sc contents indicate a higher portion of mare basalts. This is supported by relations between Sm‐Al₂O₃, FeO‐Cr₂O₃‐TiO₂, Sm/Eu and Th‐K₂O. The composition can best be modeled as a mixture of high‐K KREEP, mare basalt and norite/troctolite, consistent with the rareness of anorthositic rocks. The largest KREEP breccia clast in the regolith is identical in its chemical composition and total REE content to the incompatible trace‐element (ITE)‐ rich high‐K KREEP rocks of the Apollo 14 landing site, pointing to a similar source. In contrast to Apollo 14 soil, SaU 169 IMB and SaU 169 KREEP breccia clast, the SaU 169 regolith is not depleted in K/Th, indicating a low contribution of high‐Th IMB such as the SaU 169 main lithology in the regolith. The data presented here indicate the SaU 169 regolith breccia is from the lunar front side, and has a strong Procellarum KREEP Terrane signature.     

On the depth of the lunar regolith

The aim of this paper is to point out that if the sinuous rilles on the Moon represent trenches in the mare ground in which they meander, the existence of a great number of individual boulders on their slopes - as discovered on the high-resolution photographs taken by US Lunar Orbiters 4 and 5 in 1967 - suggests that the solid substrate of the lunar globe is covered by broken-up debris produced by cosmic abrasion - and hereafter referred to as lunar regolith - of thickness comparable with the depth of the respective rilles - at least of those lacking flat floors; which is generally in the order of 200–300 m. This depth is much greater than that indicated previously by other methods possessing more limited depth in range; and need not apply uniformly all over the Moon. In point of fact, marial regions abounding in sinuous rilles may represent loci where the lunar regolith has developed its maximum depth.     

The effects of the martian regolith on GCM water cycle simulations

This paper describes General Circulation Model (GCM) simulations of the martian water cycle focusing on the effects of an adsorbing regolith. We describe the 10-layer regolith model used in this study which has been adapted from the 1-D model developed by Zent, A.P., Haberle, R.M., Houben, H.C., Jakosky, B.M. [1993. A coupled subsurface-boundary layer model of water on Mars. J. Geophys. Res. 98 (E2), 3319-3337, February]. Even with a 30-min timestep and taking into account the effect of surface water ice, our fully implicit scheme compares well with the results obtained by Zent, A.P., Haberle, R.M., Houben, H.C., Jakosky, B.M. [1993. A coupled subsurface-boundary layer model of water on Mars. J. Geophys. Res. 98 (E2), 3319-3337, February]. This means, however, that the regolith is not able to reproduce the diurnal variations in column water vapour abundance of up to a factor of 2-3 as seen in some observations, with only about 10% of the atmospheric water vapour column exchanging with the subsurface on a daily basis. In 3-D simulations we find that the regolith adsorbs water preferentially in high latitudes. This is especially true in the northern hemisphere, where perennial subsurface water ice builds up poleward of 60° N at depths which are comparable to the Odyssey observations. Much less ice forms in the southern high latitudes, which suggests that the water ice currently present in the martian subsurface is not stable under present conditions and is slowly subliming and being deposited in the northern hemisphere. When initialising the model with an Odyssey-like subsurface water ice distribution the model is capable of forcing the simulated water cycle from an arbitrary state close to the Mars Global Surveyor Thermal Emission Spectrometer observations. Without the actions of the adsorbing regolith the equilibrated water cycle is found to be a factor of 2-4 too wet. The process by which this occurs is by adsorption of water during northern hemisphere summer in northern mid and high latitudes where it remains locked in until northern spring when the seasonal CO₂ ice cap retreats. At this time the water diffuses out of the regolith in response to increased temperature and is returned to the residual water ice cap by eddie transport.     

Statistical investigations of the physical properties of radio sources

Six complete samples of radio sources have been analysed by the Spearman rank and the Spearman partial-rank correlation coefficients. The relations between the radio luminosities and linear sizes as well as between linear sizes and redshift indicate that the observed angular diameter-redshift diagram may be explained by the changes of linear sizes with radio luminosity of radio sources.     

Determination of spacecraft and phobos parameters of motion in the Phobos-Grunt project

For the needs of the upcoming flight to Phobos within the framework of the project Phobos-Grunt, a dynamical numerical theory of the motion of Phobos is developed on the basis of Earth-based and spacecraft (SC) optical measurements and Earth-based radio observations of the SC motion. The theory uses the most reliable astronomical constants. Within the framework of a unified dynamical model, an algorithm is proposed for the joint correction of Phobos and the spacecraft parameters of motion, among which are the secular acceleration of Phobos and its gravitational constant. The accuracy of the obtained ephemeris is estimated for the time of the SC arrival to Phobos.     

Implications for asteroidal regolith properties from comparisons with the lunar phase relation and theoretical considerations

The phase relations of several asteroids. Mercury, and the Moon display the same basic characteristics, but differ slightly in detail. An improved treatment of the photometric function for open-work particulate layers shows that for phase angles greater than about 7°, the shape of the curves is diagnostic of the presence of such layers, and that both the shape and slope of the curves is dependent primarily upon the bulk density of these layers. This treatment also strongly indicates that the “opposition effect” is not due to shadow hiding in a regolith of very low bulk density. Other data support the idea that this effect is unrelated to shadow-hiding phenomena, and that it may thus be a diffraction/scattering effect with or without internal reflection phenomena also.     

Mineralogy and petrography of C asteroid regolith: The Sutter's Mill CM meteorite

Based upon our characterization of three separate stones by electron and X‐ray beam analyses, computed X‐ray microtomography, Raman microspectrometry, and visible‐IR spectrometry, Sutter's Mill is a unique regolith breccia consisting mainly of various CM lithologies. Most samples resemble existing available CM2 chondrites, consisting of chondrules and calcium‐aluminum‐rich inclusion (CAI) set within phyllosilicate‐dominated matrix (mainly serpentine), pyrrhotite, pentlandite, tochilinite, and variable amounts of Ca‐Mg‐Fe carbonates. Some lithologies have witnessed sufficient thermal metamorphism to transform phyllosilicates into fine‐grained olivine, tochilinite into troilite, and destroy carbonates. One finely comminuted lithology contains xenolithic materials (enstatite, Fe‐Cr phosphides) suggesting impact of a reduced asteroid (E or M class) onto the main Sutter's Mill parent asteroid, which was probably a C class asteroid. One can use Sutter's Mill to help predict what will be found on the surfaces of C class asteroids such as Ceres and the target asteroids of the OSIRIS‐REx and Hayabusa 2 sample return missions (which will visit predominantly primitive asteroids). C class asteroid regolith may well contain a mixture of hydrated and thermally dehydrated indigenous materials as well as a significant admixture of exogenous material would be essential to the successful interpretation of mineralogical and bulk compositional data.