Magnetic polarity zonation within the El Teniente copper–molybdenum porphyry deposit, central Chile

El Teniente porphyry copper deposit, the world’s greatest intrusion-related Cu–Mo ore body, is hosted within basaltic–andesitic volcanic and gabbroic rocks (mafic complex). This ore body is strongly affected by multiple events of alteration/mineralization with pervasive potassic and chloritic alteration and coetaneous with associated copper mineralization. We present paleomagnetic results obtained from oriented samples at four locations within the mine and from two drill cores, 200 and 400 m long, respectively. Samples are representative of all the main hydrothermally altered rock units, with emphasis on the mafic host rock and dacitic (Teniente dacite porphyry) and dioritic porphyry intrusions. Magnetic experiments [hysteresis loop, isothermal remanent magnetization (IRM), k–T curves, thermal, and alternating field demagnetization] show the presence of prevailing magnetite. Microscope and SEM observations show two families of magnetite, (a) large multidomain magnetite grains, associated with biotite and chlorite of various different hydrothermal alteration events, and (b) abundant small to medium grain-size magnetite (<10 μm) contained within plagioclase, either related to an early Na–Ca–Fe alteration or included within plagioclase during magmatic crystal growth. While the Teniente dacite porphyry and the quartz diorite–tonalite have low magnetic susceptibility (<0.0005 SI) and low natural remanent magnetization (NRM, 10⁻⁴–10⁻³ Am⁻¹), the mineralized mafic host rocks have usually high susceptibility (>0.01 and up to 0.2 SI) with NRM in the range 0.1–2 Am⁻¹. Most mafic complex rock samples have univectorial magnetizations during alternating field or thermal demagnetization. Within the mine, the magnetic polarity is spatially distributed. In the northern part of the deposit, the Teniente dacite porphyry, the associated hydrothermal breccias, and the hosting mafic complex record a reverse polarity magnetization, also observed in the El Teniente sub-6 mine sector immediately to the east and southeast. In the eastern part of the deposit, a normal polarity is observed for samples of the mafic complex from the two long drill cores. There is no evidence for superimposed magnetizations of opposite polarities in samples of the mafic complex. Anhysteretic remanent magnetization (ARM) in a DC field of 40 μT and NRM have similar magnitude and comparable behavior upon alternating field demagnetization. The well-defined strong remanent magnetizations associated with high unblocking temperatures (>500°C) indicate an acquisition of remanent magnetization during mineralization by circulating high temperature fluids related with ore deposition. Paleomagnetic results and the recorded polarity zonation suggest multiple mineralization events occurred at El Teniente, each one with its own evolution stages, superimposed within the district. These results indicate that a simplified broad four-stage model for El Teniente, as presented and overly employed by many authors, divided in (1) late magmatic, (2) main hydrothermal, (3) late hydrothermal, and (4) posthumous stage, does not recognize various short-lived single mineralization events, some superimposed and some distinctly separated in time and space. There is no paleomagnetic evidence for post-mineralization deformation     

Zircon U–Pb and molybdenite Re–Os geochronology of copper–molybdenum deposits in southeast Liaoning Province,China

ABSTRACT

Liaoning Province in China is an area known for the occurrence of numerous copper and/or molybdenum deposits of variable size. However, the age of mineralization and tectonic setting in this region are still a subject of debate. In this study we describe the geology of these deposits and apply zircon U–Pb and molybdenite Re–Os isotopic dating to constrain their ages and define the metallogenic epochs of this province. The Huatong Cu–Mo deposit yields molybdenite Re–Os model ages of 127.6–126.3 Ma and an isochron age of 127.4 ± 0.7 Ma. The Dongbeigou Mo deposit yields molybdenite Re–Os model ages of 132.6–127.1 Ma, an isochron age of 128.1 ± 5.1 Ma, and a zircon U–Pb age of 129.4 ± 0.3 Ma for the associated monzogranite. The granodiorite associated with the Wanbaoyuan Cu–Mo deposit yields a zircon U–Pb age of 128.4 ± 1.1 Ma; the plagiogranite associated with the Yaojiagou Mo deposit yields an age of 167.5 ± 0.9 Ma; and the biotite–plagioclase gneiss from the Shujigou Cu deposit yields an age of 2549.4 ± 5.6 Ma. These results, together with previous geochronology data, show that intense Cu–Mo porphyry and skarn mineralization were coeval with Early–Middle Jurassic and Early Cretaceous granitic magmatism. The former was associated with the orogeny that followed the collision of the Siberian and North China plates and the resulting closure of the palaeo-Asian Ocean, and the latter with rifting that followed the subduction of the palaeo-Pacific Plate and associated lithospheric thinning. Volcanogenic massive sulfide Cu deposit. mineralization took place much earlier, in the late Archaean, and was related to continent–continent collision, palaeo-ocean closure, the formation of a united continental landmass, bimodal volcanism, magma emplacement, and subsequent metamorphism and deformation of syn-collisional granites.     

A review of sulfur to selenium ratios in magmatic nickel–copper and platinum-group element deposits

Deviations in the sulfur to selenium ratios (S/Se) from mantle values in magmatic Ni–Cu–Platinum Group Elements (PGE) sulfide deposits have been widely used to constrain the ore forming processes. Basically, S/Se ratios greater than mantle values are interpreted to be the result of contamination of the mantle derived magma by S-rich sedimentary rocks, whereas S/Se ratios lower than mantle values are thought to be the result of S loss during post-crystallization. However, there are many other processes involved in producing a deposit and it is possible that these may be also important in controlling S/Se ratios. In order to investigate the relative importance of these processes, we have compiled a data base of S, Se, δ³⁴S and metal values from Ni–Cu–PGE sulfide deposits. This compilation shows that processes affecting S/Se ratios can be divided into two main classes: the magmatic processes and the late- to post-magmatic processes.

• 1)Magmatic processes include the well-known addition of S from sedimentary rocks, variations in the sulfide to silicate liquid ratio (R-factor), depletion of the silicate magma in Se by early segregation of the sulfide liquid, and the moderate incompatibility of Se into the first sulfide minerals to crystallize from a sulfide liquid, the monosulfide-solid-solution (MSS). This incompatibility results in a change in S/Se ratio between the Fe-rich and Cu-rich zones of magmatic sulfide ores. The fractionation of Se during crystallization of sulfide liquids has not previously been appreciated.
• 2)Late- to post-magmatic processes include: hydrothermal alteration, high-grade metamorphism, serpentinization and supergene weathering. Some metamorphosed Cu-deposits have low S/Se ratios suggesting S-loss by breakdown of sulfide minerals during a high-grade metamorphic event. However, the effectiveness of this process remains unclear and alternative models exist. The preferential remobilization of S relative to Se during hydrothermal alteration, serpentinization and supergene weathering leads to a moderate decrease of S/Se ratios values and can mask the initial S/Se ratio.

     

Age of granitic activity associated with copper–molybdenum mineralization at Malanjkhand, Central India

The Malanjkhand copper–molybdenum deposit in the Bhandara Craton, Central India, is hosted by a granite complex which consists of regionally dominant grey granitoid and pink granitoid confined to the mineralized zone. New SHRIMP RG data on zircons from both granite types are inferred to have crystallized during the same magmatic pulse at ca 2.48 Ga. The discrepancy between zircon age and earlier obtained Rb–Sr whole-rock age is attributed to modification of the Rb–Sr system by hydrothermal overprint. Similarity in petrographic features and chemical affinity in combination with identical age strongly indicate that the pink granite is the hydrothermally altered variety (microclinization and silicification) of the grey granite. The spatially associated, main Cu–Mo mineralization event at Malankhand appears to be broadly contemporaneous with and genetically related to the emplacement of the host granitoids at about 2.48 Ga.     

Types,characteristics, and time–space distribution of molybdenum deposits in China

Molybdenum exploration activity in China has accelerated tremendously during the past decade owing to the continuous, increasing demand for Earth resources. China possesses the largest Mo reserves in the world (exceeding 19.6 Mt). The major ore deposits are of porphyry, porphyry–skarn, skarn, vein, and sedimentary types. Porphyry molybdenum deposits contain 77.5% of the Chinese Mo reserves, with lesser amounts in porphyry–skarns (13%), skarns (5.1%), and veins (4.4%). Exploitation of sedimentary-type molybdenum deposits thus far has been uneconomical. The six Mo provinces are in the Northeast China, Yanliao, Qinling–Dabie, middle–lower Yangtze River Valley, South China, and Sanjiang areas. We recognize six ore-forming periods: (1) Precambrian (>541 Ma), (2) Palaeozoic (541–250 Ma), (3) Triassic (250–200 Ma), (4) Jurassic–Early Cretaceous (190–135 Ma), (5) Cretaceous (135–90 Ma), and (6) Cenozoic (55–12 Ma). The abundance of Mo ore deposits in China reflects the occurrence of multiple periods of tectonism, involving interactions between the Siberian, North China, Yangtze, India, and Palaeo-Pacific plates. Precambrian molybdenum deposits are related to Mesoproterozoic volcanism in an extensional setting. Palaeozoic Cu–Mo deposits are related to calc-alkaline granitic plutons in an island arc or a continental margin setting. Triassic Mo deposits formed in the syn-collision–postcollision tectonic setting between the Siberian and North China plates and between the North China and Yangzi plates. Jurassic–Early Cretaceous molybdenum deposits formed along the eastern margin of Asia and are associated with the palaeo-Pacific plate-subduction tectonic setting. Cretaceous Mo deposits are related to high-K calc-alkaline granitic rocks and formed in a lithospheric thinning setting. Cenozoic molybdenum deposits formed in a collision setting between the Indian and Eurasian continents and the subsequent extensional setting.     

Catastrophic,rainfall-induced debris flows in Andean villages of Tarapacá, Atacama Desert,northern Chile

In March 2012, during the rainy season in the Altiplano plateau, a >100-year return period rainfall event affected the deeply incised valleys of the Precordillera of the Tarapacá Region, northern Chile. This extreme event in a very arid region triggered a number of debris and mud flows that caused severe damage and destruction in several small villages along the Camiña and Tarapacá valleys. The highly vulnerable location of the villages on top of alluvial fans due to socioeconomic and cultural reasons is a key factor to explain the level of destruction in most villages. In this paper, this unusual, remarkable landslide event is described, and the hazard faced by these settlements for future rainfall episodes and possible mitigation measures are discussed.     

Tectonic settings of porphyry Cu–Mo–Au deposits in the Himalayan–Tibetan orogen,East Tethys

Porphyry Cu (Mo–Au) deposits in the Himalayan–Tibetan orogen formed during the Late Triassic, Early Cretaceous, Eocene, Oligocene, and Miocene and can be classified into different metallogenic belts according to their petrologic features, mineralization ages, and tectonic settings. A close spatial relationship to regional strike–slip faults is evident in all five belts. Porphyry Cu (Mo–Au) deposits exist in a wide range of tectonic environments, including island arc, syn-collision, post-collisional convergence, and continental-transform plate boundaries.

Porphyry Cu deposits cluster in the southernmost part of the Yidun–Zhongdian Belt, along the N–S-trending Gaze River dextral strike–slip fault. Porphyry Cu deposits in the Lijiang–Jinping Belt lie along the Ailaoshan–Red River continental–transform shear zone and the associated strike–slip faults. The Yulong–Malasongduo porphyry belt is controlled by the Cesuo Fault, a NNW-trending regional dextral transcurrent fault that is associated with Palaeogene westward continental oblique subduction along the Jinsha suture. In the Gangdis Belt, Miocene porphyry Cu deposits are localized along N–S-trending normal faults, which were produced by transpression within the regional NW–SE-trending Karakoram–Jiali fault zone (KJFZ). A close spatial relationship between porphyry Cu deposits and strike–slip faults also exists for the Bangong–Nujiang Belt.     

Delineation of mineralization zones in porphyry Cu deposits by fractal concentration–volume modeling

The purpose of this study was to identify the various mineralization zones especially supergene enrichment and hypogene in two different Iranian porphyry Cu deposits, based on subsurface data and by using the proposed concentration–volume (C–V) fractal method. The Sungun and Chah-Firuzeh porphyry Cu deposits, which are situated in NW and SE Iran, respectively, were selected for this study. Straight lines fitted through log–log plots showing C–V relations for Cu were employed to separate supergene enrichment and hypogene zones from oxidation zones and barren host rocks in the two deposits and to distinguish a skarn mineralized zone from the hypogene zone in Sungun deposit. In the proposed C–V fractal method, the identification of mineralization zones is based on power–law relationships between Cu concentrations and the volume of rocks hosting porphyry Cu mineralization. Separate subsurface data from the two deposits were analyzed by C–V fractal method and the results have been compared with geological models which included alteration and mineralogical models. The comparison shows that the interpreted zones based on the C–V fractal method are consistent with the geological models. The proposed C–V method is a new approach to defining zones in a mineral deposit and there was no commercial software available to perform the relevant calculations; therefore, a fractal concentration–volume (FCV) software was designed by the authors to achieve this goal.     

Carboniferous porphyry Cu–Au deposits in the Almalyk orefield,Uzbekistan: the Sarycheku and Kalmakyr examples

The Almalyk porphyry cluster in the western part of the Central Asian Orogenic Belt is the second largest porphyry region in Asia and hence has attracted considerable attention of the geologists. In this contribution, we report the zircon U–Pb ages, major and trace element geochemistry as well as Sr–Nd isotopic data for the ore-related porphyries of the Sarycheku and Kalmakyr deposits. The zircon U–Pb ages (Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS)) of ore-bearing quartz monzonite and granodiorite porphyries from the Kalmakyr deposit are 326.1 ± 3.4 and 315.2 ± 2.8 Ma, and those for the ore-bearing granodiorite porphyries and monzonite dike from the Sarycheku deposit are 337.8 ± 3.1 and 313.2 ± 2.5 Ma, respectively. Together with the previous ages, they confine multi-phase intrusions from 337 to 306 Ma for the Almalyk ore cluster. Geochemically, all samples belong to shoshonitic series and are enriched in large-ion lithophile elements relative to high field strength elements with very low Nb/U weight ratios (0.83–2.56). They show initial (⁸⁷Sr/⁸⁶Sr)_i ratios of 0.7059–0.7068 for Kalmakyr and 0.7067–0.7072 for Sarycheku and low ε_Nd(t) values of ?1.0 to ?0.1 for Kalmakyr and ?2.3 to 0.2 for Sarycheku, suggesting that the magmas were dominantly derived from a metasomatized mantle wedge modified by slab-derived fluids with the contribution of the continental crust by assimilation-fractional-crystallization process. Compared to the typical porphyry Cu deposits, the ore-bearing porphyries in the Almalyk cluster are shoshonitic instead of the calc-alkaline. Moreover, although the magmatic events were genetically related to a continental arc environment, the ore-bearing porphyries at Sarycheku and Kalmakyr do not show geochemical signatures of typical adakites as reflected in some giant porphyry deposits in the Circum-Pacific Ocean, indicating that slab-melting may not have been involved in their petrogenesis.     

Geological characteristics and genesis of the Jurassic No. I porphyry Cu–Au deposit in the Xiongcun district,Gangdese porphyry copper belt,Tibet

The Xiongcun district, located in the western segment of the Gangdese porphyry copper belt (GPCB), hosts the only known Jurassic mineralization in the GPCB, Tibet, PRC. The No. I deposit in the Xiongcun district is related to the Middle Jurassic quartz diorite porphyry (167–161 Ma) and the mineralization was formed at ca. 161.5 ± 2.7 Ma. Ore-bearing Middle Jurassic quartz diorite porphyry emplaced into the Early Jurassic volcano-sedimentary rock sequences of the Xiongcun Formation. Veinlets and disseminated mineralization developed within the Middle Jurassic quartz diorite porphyry and the surrounding metamorphosed tuff, hosting a measured and indicated resource of 1.04 Mt copper, 143.31 t gold and 900.43 t silver with an average grade of 0.48% copper, 0.66 g/t gold, and 4.19 g/t silver. The mineralization can be assigned to four stages, including three main stages of hypogene mineralization and one epigenetic stage. The main alteration associated with mineralization is potassic. Seven mineralization-related hydrothermal veins have been recognized, including quartz–sulfide, biotite–sulfide, magnetite–sulfide, quartz–molybdenite–sulfide, chalcopyrite–pyrite–pyrrhotite, pyrite and polymetallic veins. The S and Pb isotopic compositions of the ore sulfides and the Re contents of the molybdenite suggest a mantle source for the ore-forming materials with minor contamination from the subducted sediments. Hydrogen and oxygen isotope compositions of quartz in the ores suggest that both magmatic and meteoric waters were involved in the ore-forming process. The ore-bearing porphyry (167–161 Ma) and ore-forming (161.5 ± 2.7 Ma) ages of the No. I deposit correspond to the time of northward subduction of Neo-Tethys oceanic slab. The geochemical data of the ore-bearing porphyry indicate that the No. I deposit formed in an intra-oceanic island arc setting and the ore-bearing porphyry originated from the partial melting of mantle with limited contribution of subducted sediments. The genesis of the ore-bearing porphyry and No. I deposit is interpreted as being related to northward intra-oceanic subduction of Neo-Tethys oceanic slab in the Middle Jurassic time (167–161 Ma).     

“Normal” to adakite-like arc magmatism associated with the El Abra porphyry copper deposit,Central Andes,Northern Chile

International Journal of Earth Sciences - The El Abra porphyry copper deposit belongs to the Late Eocene—Early Oligocene metallogenic belt of northern Chile, which host several world-class...     

The chromite deposits associated with ophiolite complexes, Southeastern Desert, Egypt： Petrological and geochemical characteristics and mineralization

1 Introduction The association of massive Fe-Ni-Cu sulfides andchromite is a very unusual feature of podiformchromitites occurring in mantle tectonites of ophioliticcomplexes. It has only been described in theSoutheastern Desert, Egypt, where sulfides a…     

SHRIMP U–Pb and Ar–Ar geochronology of major porphyry and skarn Cu deposits in the Balkhash Metallogenic Belt,Central Asia,and geological implications

The Balkhash Metallogenic Belt (BMB) in Kazakhstan, Central Asia, with the occurrence of the super-large Kounrad and Aktogai, the large Borly porphyry Cu–Mo deposits, and the large Sayak skarn polymetallic ore-field, is one of the central regions of the Paleozoic Central Asian metallogenic domain and orogenic belt. In this study, newly obtained SHRIMP zircon U–Pb ages of nine samples and ⁴⁰Ar/³⁹Ar ages of six mineral samples (inclding hornblende, biotite and K-feldspar) give more detailed constraints on the timing of the granitic intrusions and their metallogeny. Porphyritic monzonite granite and tonalite porphyry from the Kounrad deposit yield U–Pb zircon SHRIMP ages of 327.3 ± 2.1 Ma and 308.7 ± 2.2 Ma, respectively. Quartz diorite and porphyritic granodiorite from the Aktogai deposit yield U–Pb SHRIMP ages of 335.7 ± 1.3 Ma and 327.5 ± 1.9 Ma, respectively. Porphyritic granodiorite and granodiorite from the Borly deposit yield U–Pb SHRIMP ages of 316.3 ± 0.8 Ma and 305 ± 3 Ma, respectively. Diorite, granodiorite, and monzonite from the Sayak ore-field yield U–Pb SHRIMP ages of 335 ± 2 Ma, 308 ± 10 Ma, and 297 ± 3 Ma, respectively. Hornblende, biotite, and K-feldspar from the Aktogai deposit yield ⁴⁰Ar/³⁹Ar cooling ages of 310.6 Ma, 271.5 Ma, and 274.9 Ma, respectively. Hornblende, biotite, and K-feldspar from the Sayak ore-field yield ⁴⁰Ar/³⁹Ar cooling ages of 287.3 ± 2.8 Ma, 307.9 ± 1.8 Ma, and 249.8 ± 1.6 Ma, respectively. The new ages constrain the timing of Late Paleozoic felsic magmatism to ∼336 to ∼297 Ma. Skarn mineralization in the Sayak ore-field formed at ∼335 and ∼308 Ma. Porphyry Cu–Mo mineralization in the Kounrad deposit and the Aktogai deposit formed at ∼327 Ma, and in the Borly deposit at ∼316 Ma. The Late Paleozoic regional cooling in the temperature range of ∼600 °C to ∼150 °C occurred from ∼307 to ∼257 Ma.     

Geologic and geochemical insights into the formation of the Taiyangshan porphyry copper–molybdenum deposit,Western Qinling Orogenic Belt,China

Taiyangshan is a poorly studied copper–molybdenum deposit located in the Triassic Western Qinling collisional belt of northwest China. The intrusions exposed in the vicinity of the Taiyangshan deposit record episodic magmatism over 20–30 million years. Pre-mineralization quartz diorite porphyries, which host some of the deposit, were emplaced at 226.6 ± 6.2 Ma. Syn-collisional monzonite and quartz monzonite porphyries, which also host mineralization, were emplaced at 218.0 ± 6.1 Ma and 215.0 ± 5.8 Ma, respectively. Mineralization occurred during the transition from a syn-collisional to a post-collisional setting at ca. 208 Ma. A barren post-mineralization granite porphyry marked the end of post-collisional magmatism at 200.7 ± 5.1 Ma. The ore-bearing monzonite and quartz monzonite porphyries have a ε_Hf(t) range from − 2.0 to + 12.5, which is much more variable than that of the slightly older quartz diorite porphyries, with T_DM2 of 1.15–1.23 Ga corresponding to the positive ε_Hf(t) values and T_DM1 of 0.62–0.90 Ga corresponding to the negative ε_Hf(t) values. Molybdenite in the Taiyangshan deposit with 27.70 to 38.43 ppm Re suggests metal sourced from a mantle–crust mixture or from mafic and ultramafic rocks in the lower crust. The δ³⁴S values obtained for pyrite, chalcopyrite, and molybdenite from the deposit range from + 1.3‰ to + 4.0‰, + 0.2‰ to + 1.1‰, and + 5.3‰ to + 5.9‰, respectively, suggesting a magmatic source for the sulfur. Calculated δ¹⁸O_fluid values for magmatic K-feldspar from porphyries (+ 13.3‰), hydrothermal K-feldspar from stockwork veins related to potassic alteration (+ 11.6‰), and hydrothermal sericite from quartz–pyrite veins (+ 8.6 to + 10.6‰) indicate the Taiyangshan deposit formed dominantly from magmatic water. Hydrogen isotope values for hydrothermal sericite ranging from − 85 to − 50‰ may indicate that magma degassing progressively depleted residual liquid in deuterium during the life of the magmatic–hydrothermal system. Alternatively, δD variability may have been caused by a minor amount of mixing with meteoric waters. We propose that the ore-related magma was derived from partial melting of the ancient Mesoproterozoic to Neoproterozoic middle to lower continental crust. This crust was likely metasomatized during earlier subduction, and the crustal magmas may have been contaminated with lithospheric mantle derived magma triggered by MASH (e.g., melting, assimilation, storage, and homogenization) processes during collisional orogeny. In addition, a significant proportion of the metals and sulfur supplied from mafic magma were simultaneously incorporated into the resultant hybrid magmas.     

Temporal–spatial distribution and tectonic setting of porphyry copper deposits in Iran: Constraints from zircon U–Pb and molybdenite Re–Os geochronology

Porphyry copper deposits (PCDs) in Iran are dominantly distributed in Arasbaran (NW Iran), the middle segment of the Urumieh–Dokhtar Magmatic Arc (UDMA), and Kerman (central SE Iran), with minor occurrences in eastern Iran and the Makran arc. This paper provides a temporal–spatial and geodynamic framework of the Iranian porphyry Cu (Mo–Au) systems, based on geochronologic data obtained from zircon U–Pb and molybdenite Re–Os dating of host porphyritic rocks and molybdenites in 15 major PCDs. The dating results define a long metallogenic duration (39–6 Ma), and suggest a long history of tectonic evolution from the accretionary orogeny related to early Cenozoic closure of the Neo-Tethys Ocean to subsequent collisional orogeny for the Iranian porphyry copper systems.The oldest porphyry mineralization occurred in the eastern part of Iran after the closure of a branch of the Neo-Tethyan (Sistan) Ocean between the Lut and Afghan blocks in the late Eocene (39–37 Ma). This was followed by mineralization in the Kerman porphyry copper belt over a time interval of about 20 m.y., where two metallogenic epochs have been recognized, including late Oligocene (29–27 Ma) and Miocene (18–6 Ma). The Bondar-e-Hanza deposit formed in the late Oligocene, while and the remaining dated deposits belong to Miocene epoch. According to the deposits' characteristics and their ages, the Miocene epoch can be divided into early, middle, and late stages. The Darreh Zar, Bakh Khoshk, Chah Firouzeh and Sar Kuh deposits formed during the early–middle Miocene. The largest porphyry deposits occur in the middle stage during the middle Miocene (14–11 Ma) and include the Sar Cheshmeh, Meiduk, Dar Alu and Now Chun deposits. These deposits were formed during crustal thickening, uplift, and rapid exhumation of the belt. The final stage of porphyry mineralization occurred during the late Miocene (9–6 Ma), and formed the Iju, Kerver, Kuh Panj and Abdar deposits.There were two porphyry mineralization stages in the Arasbaran porphyry copper belt in NW Iran, including an older late Oligocene (29–27 Ma) and a younger early Miocene (22–20 Ma) events. The Haft Cheshmeh deposit belongs to the older stage, and the world-class Sungun and Masjed Daghi deposits formed during the early Miocene.In the middle segment of the UDMA (Saveh–Yazd porphyry copper belt), PCDs formed during middle Miocene time (17–15 Ma). The geochronological results reveal that the porphyry mineralization moved from the northwest to southeast of UDMA over the time.Our dating results, combined with the possible late Eocene–Oligocene timing for collision between the Arabian and Iranian plates, support a model for Iranian PCD formation by partial melting of previously subduction-modified lithosphere in a post-subduction and post-collisional tectonic setting.     

Environmental assessment of copper–gold–mercury mining in the Andacollo and Punitaqui districts,northern Chile

The Coquimbo region has been one of the richest producers of Cu, Au and Hg in Chile, and some of the deposits have been mined almost continuously since the 16th century. To assess the potential environmental contamination in this region, the authors measured the concentration of Cu, As, Cd, Zn and Hg in samples of stream and mine waters, stream sediments, soils, flotation tailings, and mine wastes in the Andacollo (Cu, Au, Hg) and Punitaqui (Cu–Au, Hg) districts. The concentration of Hg in the atmosphere in these districts were also measured. Although contamination is strongly controlled by the ore in each district, metal dispersion is modified by the degree of metallurgical processing efficiency as shown by the outdated Cu flotation system at Andacollo (stream sediments Cu 75–2200 μg/g). Conversely, more efficient procedures at Punitaqui resulted in less stream contamination, where stream sediments contained Cu ranging from 110–260 μg/g. However, efficient concentration by flotation of a given metal (e.g. Cu) may lead to the loss of another (e.g. Hg up to 190 μg/g in the tailings at Punitaqui), and therefore, to contamination via erosion of the tailings (downstream sediments Hg concentrations up to 5.3 μg/g). Continued use of Hg for Au amalgamation at Andacollo has led to significant contamination in stream sediments (0.2–3.8 μg/g Hg) and soils (2.4–47 μg/g Hg). Communities in this region are underdeveloped, and decades of inefficient treatment of flotation tailings and waste-rock stock piles has resulted in significant contamination of the surrounding landscape.     

Contamination of water and soil by the Erdenet copper–molybdenum mine in Mongolia

As one of the largest copper–molybdenum (Cu–Mo) mines in the world, the Erdenet Mine in Mongolia has been active since 1978 and is expected to continue operations for at least another 30 years. In this study, the potential impacts of mining activities on the soil and water environments have been evaluated. Water samples showed high concentrations of sulfate, calcium, magnesium, Mo, and arsenic, and high pH values in the order of high to low as follows: tailing water > Khangal River > groundwater. Statistical analysis and the δ²H and δ¹⁸O values of water samples indicate that the tailing water directly affects the stream water and indirectly affects groundwater through recharge processes. Soil and stream sediments are highly contaminated with Cu and Mo, which are major elements of ore minerals. Based on the contamination factor (CF), the pollution load index (PLI), and the degree of contamination (C_d), soil appears to be less contaminated than stream sediments. The soil particle size is similar to that of tailing materials, but stream sediments have much coarser particles, implying that the materials have different origins. Contamination levels in stream sediments display a tendency to decrease with distance from the mine, but no such changes are found in soil. Consequently, soil contamination by metals is attributable to wind-blown dusts from the tailing materials, and stream sediment contamination is caused by discharges from uncontained subgrade ore stock materials. Considering the evident impact on the soil and water environment, and the human health risk from the Erdenet Mine, measures to mitigate its environmental impact should be taken immediately including source control, the establishment of a systematic and continuous monitoring system, and a comprehensive risk assessment.     

The trinity pattern of Au deposits with porphyry,quartz–sulfide vein and structurally-controlled alteration rocks in Ciemas,West Java,Indonesia

The Ciemas gold mining area is located in the Sunda arc volcanic rock belt, West Java, Indonesia. Ore bodies are associated with Miocene andesite, dacite and quartz diorite porphyrite. To constrain ore genesis and mineralization significance, a detailed study was recently conducted examining these deposits, which included detailed field observation, petrographic study, petrochemistry, sulfur isotope analyses, zircon U–Pb dating, and fluid inclusion analysis. The results include the following findings. 1) Ore types have been identified as porphyry, a quartz–sulfide vein, and structure-controlled alteration rocks. 2) In host rocks, zircon LA–ICP-MS U–Pb dating of quartz diorite porphyrite, amphibole tuff breccia and andesite yield ages of 17.1 ± 0.4 Ma, 17.1 ± 0.4 Ma and 17.5 ± 0.3 Ma, respectively. 3) Fluid inclusions in the quartz from ore are given priority to liquid and gas–liquid phases, and their components are of the NaCl–H₂O system with homogenization temperatures of 240–320 °C, salinities of 14–17%, densities of 0.85–0.95 g/cm³, and fluid pressure values between 4.1 and 46.8 MPa, corresponding to metallogenic depths from 150 to 1730 m. Fluid characteristics are identified as similar to those of high sulfur epithermal deposits. 4) The sulfur isotopic compositions are notably uniform, the δ³⁴S values of wall rocks range from 3.71 to 3.85‰, and the δ³⁴S values of ores vary from 4.90‰ to 6.55‰. The sulfur isotopic composition of ores is similar to that of the wall rocks, indicating a mixed origin of mantle with a sedimentary basement. 5) The trace element patterns of different ore types are similar, which indicates that they originate from the same source. Au deposits primarily occurred during the late magmatic activity. Finally, we have set up the regional metallogenic model, confirming that this gold deposit in the Sunda arc volcanic rock belt belongs to a metallogenic system from porphyry to epithermal type.     

Timing and formation of porphyry Cu–Mo mineralization in the Chuquicamata district, northern Chile: new constraints from the Toki cluster

The recently discovered Toki cluster, which includes the Toki, Quetena, Genoveva, Miranda, and Opache porphyry Cu–Mo prospects, is located 15 km south–southwest of the Chuquicamata–Radomiro Tomic mines in northern Chile. These prospects occur in an area of 5?×?6 km and are completely covered with Neogene alluvial deposits. Inferred resources for the cluster are estimated at about 20 Mt of fine copper, with Toki and Quetena contributing ～88 % of these resources. Mineralization in these deposits is associated with tonalite porphyries that intruded andesites and dacites of the Collahuasi Group and intrusions of the Fortuna–Los Picos Granodioritic Complex. Hypogene mineralization in the Toki cluster consists mainly of chalcopyrite–bornite with minor molybdenite with mineralization grading outward to a chalcopyrite–pyrite zone and ultimately to a pyrite halo. Alteration is dominantly of the potassic type with K-feldspar and hydrothermal biotite. Sericitic alteration is relatively restricted to late quartz–pyrite veins (D-type veins). Previous K–Ar geochronology for the cluster yielded ages within a range of 34 to 40 Ma. Four new Re–Os ages for Toki indicate that molybdenite mineralization occurred in a single pulse at ～38 Ma. Re–Os ages for three different molybdenite samples from Quetena are within error of the Toki mineralization ages. These ages are concordant with a new zircon U–Pb age of 38.6?±?0.7 Ma from the tonalite porphyry in Quetena. Two Re–Os ages for Genoveva (38.1?±?0.2 and 38.0?±?0.2 Ma) are also within error of the Toki and Quetena molybdenite ages. Four Re–Os molybdenite ages for Opache range between 36.4 and 37.6 Ma. The Miranda prospect is the youngest with an age of ～36 Ma. Four new Re–Os ages for the Chuquicamata deposit range between 33 and 32 Ma, whereas nine new ⁴⁰Ar/³⁹Ar ages of biotite, muscovite, and K-feldspar range between 32 and 31 Ma. Analyzed molybdenites have Re and Os concentrations that vary between 21–3,099 ppm and 8–1,231 ppb, respectively. The highest Re and Os concentrations are found in the Toki prospect. Three new ⁴⁰Ar/³⁹Ar ages for the Toki cluster are younger than the Re–Os mineralization ages. The age spectra for these three samples show evidence of excess argon and have similar inverse isochron ages of 35 Ma that probably reflect a late hydrothermal phyllic event. The new geochronological data presented here for the Toki cluster indicate that molybdenite mineralization occurred within a very short period, probably within 2 Ma, and synchronously (at ～38 Ma) in three mineralization centers (Toki, Quetena, and Genoveva). Furthermore, mineralization at the Toki cluster preceded the emplacement of the Chuquicamata deposit (35–31 Ma) and indicates that porphyry Cu–Mo mineralization occurred episodically over a period of several million years in the Chuquicamata district.