共查询到20条相似文献,搜索用时 46 毫秒
1.
S. Ghorbani-Khosrowshahi M. A. Behnajady 《International Journal of Environmental Science and Technology》2016,13(7):1803-1814
In this research, the stems of Onopordom Heteracanthom which is a kind of weed were converted to biochar particles, and their characteristics were investigated. The morphology and purity of these particles were examined by SEM and EDX techniques, respectively. Specific surface area was obtained as 5.73 m2 g?1 by BET method. The biochar particles obtained from Onopordom Heteracanthom were evaluated as an adsorbent to remove Cr(VI) from aqueous environments. The effect of some parameters such as initial concentration of Cr(VI), dosage of adsorbent, and pH were investigated on the adsorption capacity of Cr(VI) onto the adsorbent. The equilibrium data were analyzed by various isotherm models. The results revealed that in this process, the adsorption isotherm and kinetics have more conformity with Langmuir isotherm and pseudo-second-order kinetics, respectively. The multi-linearity of the Weber and Morris adsorption kinetic model indicates that the intra-particle diffusion is not merely the rate-controlling step for the whole adsorption process. 相似文献
2.
W. O. Afolabi B. O. Opeolu O. S. Fatoki B. J. Ximba O. S. Olatunji 《International Journal of Environmental Science and Technology》2018,15(8):1669-1678
Vitis vinifera (grape) leaf litter, an abundant agricultural waste in South Africa was chemically modified with H3PO4 and carbonized for use as biosorbent. Characterization and the potential application of the adsorbent in simultaneous removal of 4-nitrophenol and 2-nitrophenol from aqueous solutions were investigated. The adsorbent was characterized using FTIR, SEM and EDX elemental microanalysis. The EDX and FTIR analysis revealed the presence of surface oxygen moieties capable of binding to adsorbate molecules while the SEM micrographs showed the development of pores and cavities in the adsorbent. Batch adsorption experiments were conducted at a varying contact time, adsorbent dosage, pH and initial adsorbate concentration to investigate optimal conditions. The maximum adsorption capacity of the adsorbent was 103.09 and 103.10 mg/g for 4-nitrophenol and 2-nitrophenol, respectively. The adsorption process was best fitted into Freundlich isotherm while the adsorption kinetics followed a pseudo-second-order model. Liquid film and intra-particle diffusion contributed to the adsorption process. Thermodynamic parameters of ΔG°, ΔH° and ΔS° were evaluated. The adsorption was exothermic, feasible and spontaneous. The results suggest a possible application of grape leaf litter as a precursor for activated carbon and for cheaper wastewater treatment technologies. 相似文献
3.
Removal of dyes by low-cost adsorbents is an effective method in wastewater treatment. Iranian natural clays were determined to be effective adsorbents for removal of a basic dye (methylene blue) from aqueous solutions in batch processes. Characterizations of the clays were carried out by X-ray diffraction, Brunauer–Emmett–Teller surface area analysis and field-emission scanning electron microscopy. Effects of the operational parameters such as adsorbent dosage, initial dye concentration, solution pH and temperature were investigated on the adsorption performance. Adsorption isotherms like Langmuir, Freundlich and Temkin were used to analyze the adsorption equilibrium data and Langmuir isotherm was the best fit. Adsorption kinetics was investigated by pseudo-first-order, pseudo-second-order and intraparticle diffusion models and the results showed that the adsorption system conforms well to the pseudo-second-order model. The thermodynamic parameters of adsorption (ΔS°, ΔH° and ΔG°) were obtained and showed that the adsorption processes were exothermic. 相似文献
4.
A. B. Wassie V. C. Srivastava 《International Journal of Environmental Science and Technology》2016,13(10):2415-2426
In this study, teff (Eragrostis tef) straw has been chemically treated and tested as an adsorbent for Cr(VI) removal. Chemically treatment of teff straw was done by NaOH, H3PO4 and ZnCl2 solutions. Scanning electron micrograph and X-ray diffraction were used for anatomical characterization, whereas Fourier transform infrared spectroscopy was used for surface change characterization of adsorbents. Effects of different experimental parameters like pH (2–12), initial Cr(VI) concentration (100–900 mg/L), adsorbent dose (2.5–20 g/L), contact time (15–360 min) and temperature (288–318 K) were studied. Temperature increment was found to stimulate the adsorption process. Langmuir isotherm was found to give better representation over wide range of temperature for untreated, H3PO4- as well as ZnCl2-treated teff straw, and Freundlich isotherm best represented the isotherm data for NaOH-treated teff straw. Maximum Cr(VI) adsorption capacity of untreated, NaOH-, H3PO4- and ZnCl2-treated teff straw was found to be 86.1, 73.8, 89.3 and 88.9 mg/g, respectively. Respective values of average effective diffusion coefficient (D e) were found to be 2.8 × 10?13, 2.59 × 10?14, 1.32 × 10?13 and 1.14 × 10?13 m2/s, respectively. The negative value of ΔG o for all the adsorbents indicates Cr(VI) spontaneous adsorption. Isosteric heat of adsorption (ΔH st,a) was found to vary with surface coverage (θ). ΔH st,a increased for untreated, H3PO4- and ZnCl2-treated teff straw, and decreased steadily with θ for NaOH-treated teff straw. 相似文献
5.
Acacia nilotica was used for the adsorption of Reactive Black 5 (RB5) dye from an aqueous solution. Both the raw and activated (with H3PO4) carbon forms of Acacia nilotica (RAN and ANAC, respectively) were used for comparison. Various parameters (including dye concentration, contact time, temperature, and pH) were optimized to obtain the maximum adsorption capacity. RAN and ANAC were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The maximum experimental adsorption capacities for RAN and ANAC were 34.79 and 41.01 mg g?1, respectively, which agreed with the maximum adsorption capacities predicted by the Langmuir, Freundlich, and Dubinin–Radushkevich equilibrium isotherm models. The adsorption data of ANAC showed a good fit to the isotherm models based on the coefficient of determination (R 2): Langmuir type II (R 2 = 0.99) > Freundlich (R 2 = 0.9853) > Dubinin–Radushkevich (R 2 = 0.9659). This result suggested monolayer adsorption of RB5 dye. The adsorption of RB5 dye followed pseudo-second-order kinetics. The RAN adsorbent reflected an exothermic reaction (enthalpy change, ΔH = ?0.006 kJ mol?1) and increased randomness (standard entropy change, ΔS = 0.038 kJ mol?1) at the solid–solution interface. In contrast, ANAC reflected both exothermic [?0.011 kJ mol?1 (303–313 K)] and endothermic [0.003 kJ mol?1 (313–323 K)] reactions. However, the ΔS value of ANAC was lower when the RB5 adsorption increased from 313 to 323 K. The negative values for the Gibbs free energy change at all temperatures indicated that the adsorption of RB5 dye onto RAN and ANAC was spontaneous in the forward direction. 相似文献
6.
N. Mansouriieh M. R. Sohrabi M. Khosravi 《International Journal of Environmental Science and Technology》2016,13(5):1393-1404
Bimetallic Fe/Ni nanoparticles were synthesized and used for the removal of profenofos organophosphorus pesticide from aqueous solution. These novel bimetallic nanoparticles (Fe/Ni) were characterized by scanning electron microscopy, energy-dispersive X-ray analysis spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The effect of the parameters of initial pesticide concentration, pH of the solution, adsorbent dosage, temperature, and contact time on adsorption was investigated. The adsorbent exhibited high efficiency for profenofos adsorption, and equilibrium was achieved in 8 min. The Langmuir, Freundlich, and Temkin isotherm models were used to determine equilibrium. The Langmuir model showed the best fit with the experimental data (R 2 = 0.9988). Pseudo-first-order, pseudo-second-order, and intra-particle diffusion models were tested to determine absorption kinetics. The pseudo-second-order model provided the best correlation with the results (R 2 = 0.99936). The changes in the thermodynamic parameters of Gibb’s free energy, enthalpy, and entropy of the adsorption process were also evaluated. Thermodynamic parameters indicate that profenofos adsorption using Fe/Ni nanoparticles is a spontaneous and endothermic process. The value of the activation energy (E a = 109.57 kJ/mol) confirms the nature of the chemisorption of profenofos onto Fe/Ni adsorbent. 相似文献
7.
Tamiris Chahm Bruna Aparecida Martins Clovis Antonio Rodrigues 《Environmental Earth Sciences》2018,77(13):508
This study assesses the ability of two low-cost adsorbents made from waste of Rapanea ferruginea treated with ethanol (WRf) and its H2SO4-treated analog (WRf/H2SO4) for the removal of two cationic dyes methylene blue (MB) and crystal violet (CV) from aqueous solutions. The adsorbent was characterized by scanning electron microscopy, Fourier transform infrared spectrometry, thermogravimetric analysis, point of zero charge (pHpzc), specific surface, and functional groups. The adsorption of dye onto the adsorbents was studied as a function of pH solution (2–12), contact time (up to 120 min) and initial concentration (20–120 mg/L), and temperature (25, 35, and 55 °C). The influence of these parameters on adsorption capacity was studied using the batch process. The response surface methodology (RSM) was used in the experimental design, modeling of the process, and optimizing of the variables and was optimized by the response involving Box–Behnken factorial design (15 runs). The results show that the data correlated well with the Sips isotherm. The maximum adsorption capacities of MB and CV onto WRf were found to be 69 and 106 mg/g, and onto WRf/H2SO4, the adsorption capacities were 33 and 125 mg/g, respectively. The kinetic data revealed that adsorption of cationic dyes onto the adsorbents closely follows the pseudo-second-order kinetic model. Regression analysis showed good fit of the experimental data to the second-order polynomial model, with coefficient of determination (R2) values for MB (R2?=?0.9685) and MB (R2?=?0.9832) for WRf and CV (R2?=?0.9685) and CV (R2?=?0.9832) for WRf/H2SO4 indicated that regression analysis is able to give a good prediction of response for the adsorption process in the range studied. The results revealed that waste from R. ferruginea is potentially an efficient and low-cost adsorbent for adsorption of MB and CV. 相似文献
8.
L. Y. Chai X. Wang H. Y. Wang W. C. Yang Q. Liao Y. J. Wu 《International Journal of Environmental Science and Technology》2018,15(7):1411-1422
Here, a novel one-dimensional composite of poly(m-phenylenediamine)s coating on filamentous Streptomyces was successfully constructed via a controllable polymerization reaction. The synthesized composites were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Their adsorption isotherm and kinetics for aqueous hexavalent chromium were also systematically examined. The results of scanning electron microscopy analysis indicated that the obtained composites based on Streptomyces were showed a uniform and stable one-dimensional morphology with distinct core–shell configuration. Moreover, the Langmuir isotherm model (R 2 > 0.96) and pseudo-second-order equation (R 2 = 0.9996) described well the equilibrium adsorption behavior and kinetics of hexavalent chromium adsorption by the composites. In addition, bath adsorption experiments demonstrated the highest adsorption capacity of hexavalent chromium by the composites reached 320.03 mg g?1 in an acid solution, which was 5.6 times as that of the pure Streptomyces filaments. The results of Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses suggested that the adsorption of hexavalent chromium by the composites possibly involved the protonation, redox, and chelation reactions. Therefore, a promising application of these composites in treating acid hexavalent chromium-contaminated wastewater is expectable. 相似文献
9.
Z. Chen Z. Li G. Chen J. Zhu Q. Liu T. Feng 《International Journal of Environmental Science and Technology》2017,14(8):1635-1642
Novel bionanocomposites, S. cerevisiae–AgNPs, were synthesized by in situ formation of AgNPs on S. cerevisiae surface using fulvic acids as reductants under simulated sunlight. S. cerevisiae–AgNPs were characterized using UV–Vis spectroscopy, scanning electron microscope, transmission electron microscope and Fourier transform infrared spectroscopy. These analyses showed that AgNPs were distributed on the surface of S. cerevisiae. The application of S. cerevisiae–AgNPs in bacteria killing and heavy metal removal was studied. S. cerevisiae–AgNPs effectively inhibited the growth of E. coli with increasing concentrations of S. cerevisiae–AgNPs. E. coli was killed completely at high concentration S. cerevisiae–AgNPs (e.g., 100 or 200 µg mL?1). S. cerevisiae–AgNPs as excellent heavy metal absorbents also have been studied. Using Cd2+ as model heavy metal, batch experiments confirmed that the adsorption behavior fitted the Langmuir adsorption isotherms and the Cd2+ adsorption capacity of S. cerevisiae–AgNPs was 15.01 mg g?1. According to adsorption data, the kinetics of Cd2+ uptake by S. cerevisiae–AgNPs followed pseudo second-order kinetic model. Moreover, S. cerevisiae–AgNPs possessed ability of different heavy metals’ removal (e.g., Cr5+, As5+, Pb2+, Cu2+, Mn2+, Zn2+, Hg2+, Ni2+). The simulated contaminated water containing E. coli, Cd2+ and Pb2+ was treated using S. cerevisiae–AgNPs. The results indicated that the bionanocomposites can be used to develop antibacterial agents and bioremediation agents for water treatment. 相似文献
10.
Y. K. Yang N. Nakada L. Zhao H. Tanaka 《International Journal of Environmental Science and Technology》2017,14(9):1989-1998
Rapid increases in the amounts of fullerene C60 nanoparticles (nC60) being produced and used will inevitably lead to increases in the amounts released into the aquatic environment. This will have implications for human and ecosystem health. Wastewater treatment plants are key barriers to nC60 being released into aquatic systems, but little information is available on how adsorption processes in wastewater treatment plants affect the fates of nC60. We investigated the effects of the surface properties of activated sludge on the adsorption of nC60 and related mechanisms by modeling the adsorption kinetics and equilibrium process and performing correlation analyses. The adsorption of nC60 closely followed the pseudo-second-order kinetic model (R > 0.983), the Freundlich isotherm model (R > 0.990), and the linear partitioning isotherm model (R > 0.966). Different adsorption coefficients, 1.070–4.623 for the Freundlich partitioning model and 1.788–6.148 for the linear partitioning model, were found for different types of activated sludge. The adsorption coefficients significantly positively correlated with the zeta (ζ) potential (R = 0.877) and hydrophobicity (R = 0.661) and negatively correlated with particle size (R = ?0.750). The results show that nC60 adsorption is strongly affected by the surface properties of activated sludge because changes in surface properties cause changes in the electrostatic and hydrophobic interactions that occur. 相似文献
11.
Chaâri Islem Jridi Kamel Fakhfakh Emna Jamoussi Fakher Mnif Adel 《Arabian Journal of Geosciences》2016,9(10):564
This paper presents the first attempt to investigate the potential of Tunisian palygorskite-rich clay (Pal-clay) on the effectiveness of a textile dye “Direct orange 34” (DO34) removal. Important parameters which affect adsorption, such as initial solution pH, contact time, adsorbent mass, initial dye concentration, and temperature, were investigated. The raw Pal-clay was characterized using X-ray diffractometer (XRD), X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FTIR), cation exchange capacity (CEC), specific surface area (SSA) analysis, and point of zero charge (PZC) determination. The results showed that the Pal-clay has a high selectivity for DO34 and had maximum removal efficiency reaching up to about 91 %. The highest adsorption capacity was obtained at 25 °C and pH of 2. The dye uptake process fitted well to the pseudo-second-order kinetic expression and was best described by the Langmuir and Freundlich isotherms. Intra-particle diffusion studies showed that the adsorption mechanism was not exclusively controlled by the diffusion step and was more likely to be governed by external mass transfer. Thermodynamic parameters such as change in free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) were also calculated. The parameters revealed that the adsorption of dye by the raw clay is spontaneous and exothermic. The results indicate that the Pal-clay has a moderate adsorption capacity towards anionic dye. 相似文献
12.
Phosphorus dynamics and corn growth under applications of corn stalks biochar in a clay soil 总被引:1,自引:0,他引:1
Abu El-Eyuoon Abu Zied Amin 《Arabian Journal of Geosciences》2018,11(14):379
Biochar prepared from corn stalks is used as a source of phosphorus in this study. The hypotheses were to investigate effects of biochar applications in clay soil on availability, changes of phosphorus pools and maximum adsorption of phosphorus as well as corn growth. The soil was placed in plastic pots with each contains 3 kg of this soil. Biochar was added at levels of 0 (control), 6.5 (B1), 19 (B2), and 38 (B3) g pot?1. In this experiment, the pot was planted with corn (Zea mays). The results of this study revealed that the biochar application enhanced available phosphorus (Olsen-P) from 11.51 to 17.10 mg kg?1. Adding biochar significantly increased the amount of NH4Cl-P, NaHCO3-Po, and NaOH I-Po fractions (p?≤?0.05), but it significantly decreased HCl-Pi fraction (p?≤?0.05). Addition of biochar at the highest level increased the fresh and dry matter productions by up to about 75 and 48.7%, respectively, compared to the control. The phosphorus uptake by corn plants significantly increased with increasing levels of biochar. The removal efficiency (% sorption) and maximum adsorption (b) of phosphorus increased with increasing level of biochar addition compared to control. Consequently, it is recommended to add biochar produced from corn stalks to the soil in order to substitute phosphate fertilizers. 相似文献
13.
Robert Thomas Bachmann Sharifah Adawiyah Thilagam Krishnan Benson Khoo Tan Sue Sian Trevor Richards 《Arabian Journal of Geosciences》2018,11(15):426
The extensive use of peat moss as potting medium in nurseries worldwide is not sustainable causing peatland depletion and greenhouse gas emissions. This research seeks to explore whether wood biochar produced by the environment-friendly flame curtain method can partially substitute peat moss in plant nurseries without affecting plant growth and health. Biochar was produced from durian wood logs in a top-quenched Kon-Tiki earth kiln, crushed, and mixed with peat moss at dosages of 0, 1, 2.5 and 5% (w/w). Durian seedlings were grown in 2.5 L polybags arranged in randomised complete block design with 4 replicates per treatment. Plant height, collar diameter, pH, moisture content, number of branches and leaves, and plant health were monitored weekly for 94 days. Liquid fish fertiliser was used as organic fertiliser. Our results demonstrated that biochar can substitute at least 5% (w/w) peat moss without negatively affecting plant height, collar diameter, number of leaves and branches, and plant health. In addition, organic fertiliser is not required during the first 3 months of cultivation resulting in cost savings to the nursery operator. Plant height was found to be the most accurate yet simple monitoring parameter studied. A better understanding of the effect of higher biochar application rates as well as the number of times the potting medium can be reused without loss of potting medium properties and health can help to further cut nursery cost and reduce reliance on peat moss. 相似文献
14.
S. Lakshmi Narayanan G. Venkatesan I. Vetha Potheher 《International Journal of Environmental Science and Technology》2018,15(8):1687-1698
In the present experimental study, solid waste was used as an adsorbent and the effectiveness of the adsorbent was increased by novel treatment methods. Red mud, acid-treated activated red mud and iron oxide-coated acid-treated activated red mud were used for the removal of lead (II). The structural and functional groups were identified to confirm the removal of lead (II) by powder X-ray diffraction and Fourier transform infrared spectroscopy analyses. The enhancement of surface area was confirmed by Brunauer–Emmett–Teller analysis. Batch adsorption experiment was also conducted, and various parameters such as the effect of adsorbent dosage, pH, contact time and initial ion concentration were analyzed and reported. Adsorption equilibrium data were investigated using Langmuir, Freundlich and Dubinin–Radushkevich isotherm models with three parameters, and the rate of reaction was examined through kinetic models. The results indicate that in particular a novel modified form of red mud, namely iron oxide-coated acid-treated activated red mud was well fitted in lead (II) removal compared with reported adsorbents. The Langmuir isotherm shows that the maximum adsorption of adsorbate per gram was greater than other adsorbents (27.02 mg/g). In Freundlich isotherm, the Freundlich constant n values lie between 1 and 10 indicate the favorable adsorption. The calculated n values for normal red mud, acid-treated activated red mud and iron oxide-coated acid-treated activated red mud were found to be 1.9, 2.1 and 2.0 respectively. The correlation coefficient value was higher and the rate of reaction follows the pseudo-second-order kinetic model. 相似文献
15.
A. Azizi A. Torabian E. Moniri A. H. Hassani H. Ahmad Panahi 《International Journal of Environmental Science and Technology》2018,15(12):2669-2678
This research focused on the application of response surface methodology (RSM) for the removal of ethylbenzene by the graphene oxide grafted with polymethyl vinyl ketone and aniline (GO-MVK-ANI) from wastewater. The adsorbent was prepared through polymerization of graphene oxide with methyl vinyl ketone using ammonium persulfate initiator and further modification by aniline. The synthesized material was characterized via Fourier transform infrared resonance spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and Brunauer–Emmett–Teller analysis. RSM was used to minimize the number of experiments and investigate the effect of three selected parameters (contact time, initial pH and adsorbent dose) on the removal efficiency of ethylbenzene. Additionally, the affecting parameters were optimized based on the selected target (ethylbenzene removal efficiency). The results show that 73% ethylbenzene could be adsorbed with initial ethylbenzene concentration of 20 mg/l under the optimum conditions (the contact time of 11 min, pH of 5.64 and adsorbent dose of 3.75 g/l). In this paper, high R 2-value (97.18%) for ethylbenzene removal and a good agreement with adjusted R 2-value (94.65%) indicated that the model was successful and the results demonstrated a reasonable proportion of the experimental and the predicted results. 相似文献
16.
M. Shamim K. Dana 《International Journal of Environmental Science and Technology》2018,15(6):1275-1284
Evans blue (EB) dye has been successfully removed from aqueous solution through chemisorption process with synthetic layered double hydroxides (LDH) [Zn1?x Al x (OH)2NO3·nH2O, x = 0.2–0.33]. Detailed evaluation of dye adsorption characteristics in aqueous medium has been studied for different layer charged hydroxides. The objective of the study was efficient removal of a dye by LDH and understanding the structure–property relationship of the LDH on its adsorption behaviour. Highest Langmuir monolayer adsorption capacity (Qt) of 113.64 mg g?1 was observed for highest layer charge x = 0.33, and it is higher than previously reported values for the LDH-EB dye system. Under optimized condition, 99% of EB dye is removed from aqueous solution within 60 min at 313 K. The monotonous increase in Qt value with increasing layer charge is correlated with layer charge density (LCD) and lower particle size of the synthetic LDH. The variation in Qt among different layer charged materials is marginal (3.46–4.17%) with respect to the respective anion exchange capacity (AEC) of LDH NO3. The limited contribution of AEC surmises the occurrence of surface-only adsorption and absence of intercalation as validated by the XRD analysis. The spontaneity of the EB dye removal increases with increasing temperature and LCD. The chemisorption nature of the adsorption reaction is well supported by the thermodynamics values. 相似文献
17.
M. Malakootian M. Daneshkhah H. Hossaini 《International Journal of Environmental Science and Technology》2018,15(10):2129-2140
In this study, sepiolite-nano zero valent iron composite was synthesized and applied for its potential adsorption to remove phosphates from aqueous solution. This composite was characterized by different techniques. For optimization of independent parameters (pH = 3–9; initial phosphate concentration = 5–100 mg/L; adsorbent dosage = 0.2–1 g/L; and contact time = 5–100 min), response surface methodology based on central composite design was used. Adsorption isotherms and kinetic models were done under optimum conditions. The results indicated that maximum adsorption efficiency of 99.43 and 92% for synthetic solution and real surface water sample, respectively, were achieved at optimum conditions of pH 4.5, initial phosphate concentration of 25 mg/L, adsorbent dosage of 0.8 g/L, and 46.26 min contact time. The interaction between adsorbent and adsorbate is better described with the Freundlich isotherm (R 2 = 0.9537), and the kinetic of adsorption process followed pseudo-second-order model. Electrostatic interaction was the major mechanisms of the removal of phosphates from aqueous solution. The findings of this study showed that there is an effective adsorbent for removal of phosphates from aqueous solutions. 相似文献
18.
R. Aziam M. Chiban E. Eddaoudi A. Soudani M. Zerbet F. Sinan 《Arabian Journal of Geosciences》2016,9(15):659
Contamination of surface water and groundwater by organic pollutants is a serious problem due to their persistence, bioaccumulation and biomagnification through food webs. Since the removal of dyes from wastewater is considered an environmental challenge and government legislation requires textile wastewater to be treated, therefore there is a constant need to have an effective process that can efficiently remove these dyes. The aim of the present study is to evaluate the potentiality of dried Carpobrotus edulis plant as low-cost adsorbent for the removal of the industrial acid blue 113 dye from aqueous solutions using the batch equilibration technique. The effects of different physicochemical parameters such as adsorbent dose, contact time, initial dye concentration, solution pH and temperature on adsorption rate of anionic AB113 dye on microparticles of dried C. edulis plant were investigated. The experimental data were analyzed by using mathematical models to determine the thermodynamic parameters. The negative values of free energy change indicated the spontaneous nature of the adsorption and negative value of enthalpy change suggested the exothermic nature of the adsorption process. These results indicate that dried C. edulis plant as an environmentally friendly adsorbent could be potentially used for the removal of anionic dyes from aqueous solutions. 相似文献
19.
Bogdan Saletnik Grzegorz Zaguła Dorota Grabek-Lejko Idalia Kasprzyk Marcin Bajcar Maria Czernicka Czesław Puchalski 《Environmental Earth Sciences》2017,76(16):574
Because of their physicochemical properties, biochars can be used as sorption materials for removal of toxic substances. The purpose of the present study was to determine whether biochar obtained from cones of larch (Larix decidua Mill. subsp. decidua) and spruce (Picea abies L. H. Karst) could be used as a sorbent for Cd2+, Pb2+ and Co2+ in aqueous solutions. So far, this feedstock had not been tested in this respect. The material was subjected to pyrolysis at 500 and 600 °C for the duration of 5, 10 and 15 min. The obtained pyrolysates were found to differ in terms of pH and the contents of the essential macroelements. The different values of these parameters were determined for varying temperature, duration of the pyrolysis process and type of feedstock. Sorption capacities of the biochars for removal of Cd2+, Pb2+ and Co2+ were examined using simulated contamination of aqueous solutions with salts of these metals. The findings showed the highest, nearly complete, removal for Pb2+ were maximum 99.7%, and almost three times lower value for Cd2+ and Co2+ (respectively, 35.7 and 24.8%). It was demonstrated that pyrolysis of conifer cones produced optimum sorption capacities when the process was conducted at a temperature of 500 °C for the duration of 5 min. It was shown that products of spruce cone pyrolysis were characterized by better sorption capacity in comparison with products of larch cone pyrolysis. The properties of conifer cone biochar create the possibility of using it as an adsorbent in water and wastewater treatment as well as in production of filters and activated carbon. 相似文献
20.
Zeid Abdullah ALOthman Mohamed Abdelaty Habila Nora H. Al-Shalan Sulaiman M. Alfadul Rahmat Ali Ibrahim Gar Al alm Rashed Bader Alfarhan 《Arabian Journal of Geosciences》2016,9(4):315
This work aimed to investigate the adsorption characteristics, both kinetically and thermodynamically, of Cu(II) and Pb(II) removal from aqueous solutions onto mixed-waste activated carbon, as well as to study the competitive behavior found in mixed heavy metal solution systems. This study shows that activated carbon prepared from mixed waste is an effective adsorbent for the removal of Cu(II) and Pb(II) from aqueous solutions, with the aim of detoxifying industrial effluents before their safe disposal onto water surfaces. The adsorption process was characterized in terms of kinetic and thermodynamic studies. In addition, the influence of presence of Cu(II) and Pb(II) in a competitive system was investigated. The results showed that the maximum adsorption capacities were gained at a pH of 6 with a contact time of 180 min, a metal solution concentration of 300 ppm, and an adsorbent dose of 0.3 g/L. The adsorption process was found to follow a pseudo-first-order kinetic model. Thermodynamic parameters such as ΔG o, ΔH o, and ΔS o showed that the sorption process was spontaneous and endothermic in nature. A competitive study demonstrated the applicability of mixed-waste activated carbon to adsorb Cu(II) and Pb(II) from a solution of mixed metals. In addition, the adsorption capacity was found to be as effective as other adsorbents reported in the literature. The developed adsorptive removal procedure was applied for treatment of real wastewater samples and showed high removal efficiency. 相似文献