Calorimetric study on high-pressure transitions in KAlSi<Subscript>3</Subscript>O<Subscript>8</Subscript>

KAlSi₃O₈ sanidine dissociates into a mixture of K₂Si₄O₉ wadeite, Al₂SiO₅ kyanite and SiO₂ coesite, which further recombine into KAlSi₃O₈ hollandite with increasing pressure. Enthalpies of KAlSi₃O₈ sanidine and hollandite, K₂Si₄O₉ wadeite and Al₂SiO₅ kyanite were measured by high-temperature solution calorimetry. Using the data, enthalpies of transitions at 298 K were obtained as 65.1 ± 7.4 kJ mol^–1 for sanidine wadeite + kyanite + coesite and 99.3 ± 3.6 kJ mol^–1 for wadeite + kyanite + coesite hollandite. The isobaric heat capacity of KAlSi₃O₈ hollandite was measured at 160–700 K by differential scanning calorimetry, and was also calculated using the Kieffer model. Combination of both the results yielded a heat-capacity equation of KAlSi₃O₈ hollandite above 298 K as C_p=3.896 × 10²–1.823 × 10³T^–0.5–1.293 × 10⁷T^–2+1.631 × 10⁹T^–3 (C_p in J mol^–1 K^–1, T in K). The equilibrium transition boundaries were calculated using these new data on the transition enthalpies and heat capacity. The calculated transition boundaries are in general agreement with the phase relations experimentally determined previously. The calculated boundary for wadeite + kyanite + coesite hollandite intersects with the coesite–stishovite transition boundary, resulting in a stability field of the assemblage of wadeite + kyanite + stishovite below about 1273 K at about 8 GPa. Some phase–equilibrium experiments in the present study confirmed that sanidine transforms directly to wadeite + kyanite + coesite at 1373 K at about 6.3 GPa, without an intervening stability field of KAlSiO₄ kalsilite + coesite which was previously suggested. The transition boundaries in KAlSi₃O₈ determined in this study put some constraints on the stability range of KAlSi₃O₈ hollandite in the mantle and that of sanidine inclusions in kimberlitic diamonds.     

Adsorption of H<Subscript>2</Subscript>O,NH<Subscript>3</Subscript> and C<Subscript>6</Subscript>H<Subscript>6</Subscript> on alkali metal cations in internal surface of mordenite and in external surface of smectite: a DFT study

Adsorption of H₂O, NH₃ and C₆H₆ on H- and alkali metal-exchanged structures of mordenite and on corresponding cations on the smectite layer is investigated by ab initio density-functional calculations. Proton or an alkali metal cation compensates one Al/Si framework substitution and resides in the extra-framework position of zeolite or above flat smectite layer close to the Al/Si substitution. Pronounced similarities between zeolite and smectite are observed in changes of the adsorption energies and location of the external cation with changing character of the external cation. Calculated adsorption energies exhibit the following trend: E(NH₃) > E(H₂O) > E(C₆H₆). Because of looser contact with the framework, zeolitic cations are stronger adsorption centers and calculated adsorption energies of zeolites are by ~20–30% larger than cations of smectites. The highest adsorption energy is calculated for H-exchanged structures and down the group of alkali metal cations a decrease of the adsorption energy is observed. Deviations from the smooth variation of the adsorption energy are caused by: (1) formation of strong hydrogen bonds in H-exchanged structures, (2) adsorption induced migration of the external Li⁺ cation, and (3) steric hindrances of the flat C₆H₆ molecule adsorbed on the cation in the cage of zeolite.     

Theoretical studies of cation adsorption on hydroxylated α-A1<Subscript>2</Subscript>O<Subscript>3</Subscript> (corundum): electronic structure calculations

 The adsorption of alkali metal cations on a hydroxylated corundum surface was investigated using high-level electronic structure calculations, with both cluster Hartree–Fock and periodic density-functional theory approaches. The work concentrates on the structural aspects of binding sites with threefold oxygen coordination at the basal (0001) surface. It was found that adsorption at different sites can give rise to a wide range of adsorption energies, which strongly depends on the freedom of surface hydrogen atoms to adjust their positions. Alkali metal adions from Li⁺ to Cs⁺ were studied with the cluster method, periodic plane-wave pseudopotential calculations being carried out for K⁺ adsorption to validate the cluster results. A site above an octahedral interstice was found to be the least preferred for cation adsorption, despite having the lowest repulsion from surface aluminium atoms. The strongest adsorption was found over an aluminium atom in the second layer, because the hydroxyl groups could reorient towards the neighbouring octahedral interstices, and hence significantly decrease repulsion with the cation. The adsorption energy and the first three interlayer spacings parallel to the basal surface change systematically with ionic size for each adsorption site. Many of these trends extend to adsorption of Ca²⁺, Co²⁺ and Pb²⁺, which were also investigated, although a redistribution of 3d electrons in Co²⁺ results in strong adsorption even at an unfavourable site. The results suggest that it may be possible not only to predict adsorption behaviour for a wide range of elements, but also to use experimental measurements of interplanar separations to gain information about contaminated surfaces. Received: 29 April 2002 / Accepted: 23 October 2002 Acknowledgements The authors thank the Natural Environment Research Council for support in carrying out this work.     

LiFeSi<Subscript>2</Subscript>O<Subscript>6</Subscript> and NaFeSi<Subscript>2</Subscript>O<Subscript>6</Subscript> at low temperatures: an infrared spectroscopic study

 Synthetic aegirine LiFeSi₂O₆ and NaFeSi₂O₆ were characterized using infrared spectroscopy in the frequency range 50–2000 cm⁻¹, and at temperatures between 20 and 300 K. For the C2/c phase of LiFeSi₂O₆, 25 of the 27 predicted infrared bands and 26 of 30 predicted Raman bands are recorded at room temperature. NaFeSi₂O₆ (with symmetry C2/c) shows 25 infrared and 26 Raman bands. On cooling, the C2/c–P2₁/c structural phase transition of LiFeSi₂O₆ is characterized by the appearance of 13 additional recorded peaks. This observation indicates the enlargement of the unit cell at the transition point. The appearance of an extra band near 688 cm⁻¹ in the monoclinic P2₁/c phase, which is due to the Si–O–Si vibration in the Si₂O₆ chains, indicates that there are two non-equivalent Si sites with different Si–O bond lengths. Most significant spectral changes appear in the far-infrared region, where Li–O and Fe–O vibrations are mainly located. Infrared bands between 300 and 330 cm⁻¹ show unusually dramatic changes at temperatures far below the transition. Compared with the infrared data of NaFeSi₂O₆ measured at low temperatures, the change in LiFeSi₂O₆ is interpreted as the consequence of mode crossing in the frequency region. A generalized Landau theory was used to analyze the order parameter of the C2/c–P2₁/c phase transition, and the results suggest that the transition is close to tricritical. Received: 21 January 2002 / Accepted: 22 July 2002     

Structure and phase transition of CaGe<Subscript>2</Subscript>O<Subscript>5</Subscript> revisited

The structure of CaGe₂O₅ between room temperature and 923 K has been determined by X-ray powder diffraction. A continuous phase transition from triclinic C1¯ to monoclinic C2/c symmetry at T_c=714±3 K is observed. The transition is accompanied by a weak heat capacity anomaly. This anomaly and the strain analysis based on the measured lattice parameters indicate a classical second-order phase transition. The order parameter, as measured by the strain component e₂₃, is associated with the displacement of the Ca cation. Electronic structure optimization by density functional methods is used to verify the centric space group of the low-temperature structure of CaGe₂O₅.     

Atomistic model of diopside-K-jadeite (CaMgSi<Subscript>2</Subscript>O<Subscript>6</Subscript>-KAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript>) solid solution

Atomistic model was proposed to describe the thermodynamics of mixing in the diopside-K-jadeite solid solution (CaMgSi₂O6-KAlSi₂O₆). The simulations were based on minimization of the lattice energies of 800 structures within a 2 × 2 × 4 supercell of C2/c diopside with the compositions between CaMgSi₂O₆ and KAlSi₂O₆ and with variable degrees of order/disorder in the arrangement of Ca/K cations in M2 site and Mg/Al in Ml site. The energy minimization was performed with the help of a force-field model. The results of the calculations were used to define a generalized Ising model, which included 37 pair interaction parameters. Isotherms of the enthalpy of mixing within the range of 273–2023 K were calculated with a Monte Carlo algorithm, while the Gibbs free energies of mixing were obtained by thermodynamic integration of the enthalpies of mixing. The calculated T-X diagram for the system CaMgSi₂O₆-KAlSi₂O₆ at temperatures below 1000 K shows several miscibility gaps, which are separated by intervals of stability of intermediate ordered compounds. At temperatures above 1000 K a homogeneous solid solution is formed. The standard thermodynamic properties of K-jadeite (KAlSi₂O₆) evaluated from quantum mechanical calculations were used to determine location of several mineral reactions with the participation of the diopside-K-jadeite solid solution. The results of the simulations suggest that the low content of KalSi₂O₆ in natural clinopyroxenes is not related to crystal chemical factors preventing isomorphism, but is determined by relatively high standard enthalpy of this end member.     

Batisivite,V<Subscript>8</Subscript>Ti<Subscript>6</Subscript>[Ba(Si<Subscript>2</Subscript>O)]O<Subscript>28</Subscript>, a new mineral species from the derbylite group

Batisivite has been found as an accessory mineral in the Cr-V-bearing quartz-diopside metamorphic rocks of the Slyudyanka Complex in the southern Baikal region, Russia. A new mineral was named after the major cations in its ideal formula (Ba, Ti, Si, V). Associated minerals are quartz, Cr-V-bearing diopside and tremolite; calcite; schreyerite; berdesinskiite; ankangite; V-bearing titanite; minerals of the chromite-coulsonite, eskolaite-karelianite, dravite-vanadiumdravite, and chernykhite-roscoelite series; uraninite; Cr-bearing goldmanite; albite; barite; zircon; and unnamed U-Ti-V-Cr phases. Batisivite occurs as anhedral grains up to 0.15–0.20 mm in size, without visible cleavage and parting. The new mineral is brittle, with conchoidal fracture. Observed by the naked eye, the mineral is black and opaque, with a black streak and resinous luster. Batisivite is white in reflected light. The microhardness (VHN) is 1220–1470 kg/mm² (load is 30 g), the mean value is 1330 kg/mm². The Mohs hardness is near 7. The calculated density is 4.62 g/cm³. The new mineral is weakly anisotropic and bireflected. The measured values of reflectance are as follows (λ, nm—R _max ^′ /R _min ^′ ): 440—17.5/17.0; 460—17.3/16.7; 480—17.1/16.5; 500—17.2/16.6; 520—17.3/16.7; 540—17.4/16.8; 560—17.5/16.8; 580—17.6/16.9; 600—17.7/17.1; 620—17.7/17.1; 640—17.8/17.1; 660—17.9/17.2; 680—18.0/17.3; 700—18.1/17.4. Batisivite is triclinic, space group P \(\overline 1\); the unit-cell dimensions are: a = 7.521(1) Å, b = 7.643(1) Å, c = 9.572(1) Å, α = 110.20°(1), β = 103.34°(1), γ = 98.28°(1), V = 487.14(7) ų, Z = 1. The strongest reflections in the X-ray powder diffraction pattern [d, Å (I, %)(hkl)] are: 3.09(8)(12\(\overline 2\)); 2.84, 2.85(10)(021, 120); 2.64(8)(21\(\overline 3\)); 2.12(8)(31\(\overline 3\)); 1.785(8)(32\(\overline 4\)), 1.581(10)(24\(\overline 2\)); 1.432, 1.433(10)(322, 124). The chemical composition (electron microprobe, average of 237 point analyses, wt %) is: 0.26 Nb₂O₅, 6.16 SiO₂, 31.76 TiO₂, 1.81 Al₂O₃, 8.20 VO₂, 26.27 V₂O₃, 12.29 Cr₂O₃, 1.48 Fe₂O₃, 0.08 MgO, 11.42 BaO; the total is 99.73. The VO₂/V₂O₃ ratio has been calculated. The simplified empirical formula is (V _4.8 ³⁺ Cr_2.2V _0.7 ⁴⁺ Fe_0.3)_8.0(Ti_5.4V _0.6 ⁴⁺ )_6.0[Ba(Si_1.4Al_0.5O_0.9)]O₂₈. An alternative to the title formula could be a variety (with the diorthogroup Si₂O₇) V₈Ti₆[Ba(Si₂O₇)]O₂₂. Batisivite probably pertains to the V ₈ ³⁺ Ti ₆ ⁴⁺ [Ba(Si₂O)]O₂₈-Cr ₈ ³⁺ Ti ₆ ⁴⁺ [Ba(Si₂O)]O₂₈ solid solution series. The type material of batisivite has been deposited in the Fersman Mineralogical Museum, Russian Academy of Sciences, Moscow.     

XMCD at Fe L<Subscript>2,3</Subscript> edges,Fe and S K edges on Fe<Subscript>7</Subscript>S<Subscript>8</Subscript>

Pyrrhotite (Fe₇S₈) is a natural iron sulphide that can participate in rock magnetisation. Its electronic structure is not yet surely described. X-ray magnetic circular dichroism (XMCD) at Fe L_2,3 edges on Fe₇S₈, coupled with multiplet calculations, shows that iron is present only as Fe²⁺ in this magnetic iron sulphide. It reveals a strong magnetic orbital moment. XMCD at Fe and S K edges shows the quite strong polarization of both Fe and S in Fe₇S₈.     

First-principles simulation of high-pressure polymorphs in MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript>

We have used density functional theory to investigate the stability of MgAl₂O₄ polymorphs under pressure. Our results can reasonably explain the transition sequence of MgAl₂O₄ polymorphs observed in previous experiments. The spinel phase (stable at ambient conditions) dissociates into periclase and corundum at 14 GPa. With increasing pressure, a phase change from the two oxides to a calcium-ferrite phase occurs, and finally transforms to a calcium-titanate phase at 68 GPa. The calcium-titanate phase is stable up to at least 150 GPa, and we did not observe a stability field for a hexagonal phase or periclase + Rh₂O₃(II)-type Al₂O₃. The bulk moduli of the phases calculated in this study are in good agreement with those measured in high-pressure experiments. Our results differ from those of a previous study using similar methods. We attribute this inconsistency to an incomplete optimization of a cell shape and ionic positions at high pressures in the previous calculations.     

Low-temperature heat capacities of MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> and spinels of the MgCr<Subscript>2</Subscript>O<Subscript>4</Subscript>–MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> solid solution

We present results from low-temperature heat capacity measurements of spinels along the solid solution between MgAl₂O₄ and MgCr₂O₄. The data also include new low-temperature heat capacity measurements for MgAl₂O₄ spinel. Heat capacities were measured between 1.5 and 300 K, and thermochemical functions were derived from the results. No heat capacity anomaly was observed for MgAl₂O₄ spinel; however, we observe a low-temperature heat capacity anomaly for Cr-bearing spinels at temperatures below 15 K. From our data we calculate standard entropies (298.15 K) for Mg(Cr,Al)₂O₄ spinels. We suggest a standard entropy for MgAl₂O₄ of 80.9 ± 0.6 J mol⁻¹ K⁻¹. For the solid solution between MgAl₂O₄ and MgCr₂O₄, we observe a linear increase of the standard entropies from 80.9 J mol⁻¹ K⁻¹ for MgAl₂O₄ to 118.3 J mol⁻¹ K⁻¹ for MgCr₂O₄.     

Thermodynamic properties,low-temperature heat-capacity anomalies,and single-crystal X-ray refinement of hydronium jarosite, (H<Subscript>3</Subscript>O)Fe<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>6</Subscript>

Crystals of hydronium jarosite were synthesized by hydrothermal treatment of Fe(III)–SO₄ solutions. Single-crystal XRD refinement with R₁=0.0232 for the unique observed reflections (|F_o| > 4_F) and wR₂=0.0451 for all data gave a=7.3559(8) Å, c=17.019(3) Å, V^o=160.11(4) cm³, and fractional positions for all atoms except the H in the H₃O groups. The chemical composition of this sample is described by the formula (H₃O)_0.91Fe_2.91(SO₄)₂[(OH)_5.64(H₂O)_0.18]. The enthalpy of formation (H^o_f) is –3694.5 ± 4.6 kJ mol^–1, calculated from acid (5.0 N HCl) solution calorimetry data for hydronium jarosite, -FeOOH, MgO, H₂O, and -MgSO₄. The entropy at standard temperature and pressure (S^o) is 438.9±0.7 J mol^–1 K^–1, calculated from adiabatic and semi-adiabatic calorimetry data. The heat capacity (C_p) data between 273 and 400 K were fitted to a Maier-Kelley polynomial C_p(T in K)=280.6 + 0.6149T–3199700T^–2. The Gibbs free energy of formation is –3162.2 ± 4.6 kJ mol^–1. Speciation and activity calculations for Fe(III)–SO₄ solutions show that these new thermodynamic data reproduce the results of solubility experiments with hydronium jarosite. A spin-glass freezing transition was manifested as a broad anomaly in the C_p data, and as a broad maximum in the zero-field-cooled magnetic susceptibility data at 16.5 K. Another anomaly in C_p, below 0.7 K, has been tentatively attributed to spin cluster tunneling. A set of thermodynamic values for an ideal composition end member (H₃O)Fe₃(SO₄)₂(OH)₆ was estimated: G^o_f= –3226.4 ± 4.6 kJ mol^–1, H^o_f=–3770.2 ± 4.6 kJ mol^–1, S^o=448.2 ± 0.7 J mol^–1 K^–1, C_p (T in K)=287.2 + 0.6281T–3286000T^–2 (between 273 and 400 K).     

High-pressure synthesis,long-term stability of single crystals of diboron trioxide,B<Subscript>2</Subscript>O<Subscript>3</Subscript>, and an empirical electronic polarizability of <Superscript>[3]</Superscript>B<Superscript>3+</Superscript>

Single crystals of B₂O₃ are needed for the precise determination of the refractive indices used to calculate the electronic polarizability α of 3-coordinated boron. The α(B) values in turn are used to predict mean refractive indices of borate minerals. Since the contribution of boron to the total polarizability of a mineral is very low, the synthetic compound B₂O₃ represents an ideal model system because of its high molar content of boron. Millimeter-sized crystals were synthesized at 1 GPa in a piston-cylinder apparatus. The samples were heated above the liquidus (800 °C), subsequently cooled at 15 °C/h to 500 °C and finally quenched. The refractive indices were determined by the immersion method using a microrefractometer spindle stage. The refractive indices n _o = 1.653 (3) and n _e = 1.632 (3) correspond to a total polarizability for B₂O₃ of α = 4.877 Å³. These values were used to determine the electronic polarizability of boron of α(B) = 0.16 Å³. Although the surface of the B₂O₃ crystals was coated with a hydrous film immediately after being exposed to air, its bulk crystallinity is retained for a period of at least 2 months.     

Synthesis,TEM characterization and thermal behaviour of LiNiSi<Subscript>2</Subscript>O<Subscript>6</Subscript> pyroxene

A pyroxene with composition LiNiSi₂O₆ was synthesized at T = 1,473 K and P = 2.0 GPa; the cell parameters at T = 298 K are a = 9.4169(6) Å, b = 8.4465(7) Å, c = 5.2464(3) Å, β = 110.534(6)°, V = 390.78(3) Å³. TEM examination of the LiNiSi₂O₆ pyroxene showed the presence of h + k odd reflections indicative of a primitive lattice, and of antiphase domains obtained by dark field imaging of the h + k odd reflections. A HT in situ investigation was performed by examining TEM selected area diffraction patterns collected at high temperature and synchrotron radiation powder diffraction. In HTTEM the LiNiSi₂O₆ was examined together with LiCrSi₂O₆ pyroxene. In LiCrSi₂O₆ the h + k odd critical reflections disappear at about 340 K; they are sharp up to the transition temperature and do not change their shape until they disappear. In LiNiSi₂O₆ the h + k odd reflections are present up to sample deterioration at 650 K. A high temperature synchrotron radiation powder diffraction investigation was performed on LiNiSi₂O₆ between 298 and 773 K. The analysis of critical reflections and of changes in cell parameters shows that the space group is P-centred up to the highest temperature. The comparative analysis of the thermal and spontaneous strain contributions in P2₁/c and C2/c pyroxenes indicates that the high temperature strain in P-LiNiSi₂O₆ is very similar to that due to thermal strain only in C2/c spodumene and that a spontaneous strain contribution related to pre-transition features is not apparent in LiNiSi₂O₆. A different high-temperature behaviour in LiNiSi₂O₆ with respect to other pyroxenes is suggested, possibly in relation with the presence of Jahn–Teller distortion of the M1 polyhedron centred by low-spin Ni³⁺.     

Crystal chemistry of natural and synthetic lead oxyhalides. Part I. Crystal structure of Pb<Subscript>13</Subscript>O<Subscript>10</Subscript>Cl<Subscript>6</Subscript>

Crystals of lead oxychloride Pb₁₃O₁₀Cl₆ have been synthesized on the basis of high-temperature solid-state reactions. The Pb₁₃O₁₀Cl₆ structure was studied using X-ray single-crystal diffraction analysis. The compound is monoclinic, and the space group is C2/c; the unit-cell dimensions are a = 16.1699(14), b = 7.0086(6), c = 23.578(2) Å, β = 97.75°, and V = 2647.6(4) ų. The structure has been solved by direct methods and refined to R ₁ = 0.0505 for 2671 observed unique reflections. The structure is a 3D framework consisting of OPb₄ tetrahedrons. Chlorine atoms are located in the framework channels. The structure contains seven symmetrically independent Pb atoms, which are coordinated by 2 to 4 O^2? and 2 to 4 Cl^? anions. The synthesized compound is compared with other natural and synthetic lead oxyhalides.     

Experimental study of pure and mixtures of CO<Subscript>2</Subscript> and CH<Subscript>4</Subscript> adsorption on modified carbon nanotubes

In this work 3-[2-(2-aminoethylamino)ethylamino]propyl trimethoxysilane (TRI) was employed to functionalize MWCNT containing hydroxyl groups (OH-MWCNT), and the XRD, FTIR, TGA and CHNS elemental analysis techniques were used to characterize the resulted adsorbents. The characterization results for amine-MWCNT showed amine groups effectively attached to the surface of the MWCNT. The equilibrium adsorption capacity of pure CO₂ and CH₄ and their binary mixture on the pristine MWCNT, OH-MWCNT and amine-MWCNT was measured through a set of equilibrium adsorption experiments at 303.2 and 318.2 K. Capacities of all three types of adsorbents for CO₂ adsorption were higher than those for methane adsorption. Also, amine-MWCNT demonstrated better performance on CO₂ adsorption than the other two adsorbents, especially at low partial pressures. The capacity of amine-MWCNT for pure CO₂ adsorption was 2.5 and 4 times as much as those for pristine MWCNT and OH-MWCNT, respectively, at the temperature of 303.2 K and the pressure of 0.2 bar. The binary adsorption experiment revealed that CO₂/CH₄ selectivity for pristine MWCNT and amine-MWCNT in all molar fractions of CO₂ is about 1.77 and 7, respectively.     

Zinclipscombite,ZnFe<Stack><Subscript>2</Subscript><Superscript>3+</Superscript></Stack>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>2</Subscript>, a new mineral species

Zinclipscombite, a new mineral species, has been found together with apophyllite, quartz, barite, jarosite, plumbojarosite, turquoise, and calcite at the Silver Coin mine, Edna Mountains, Valmy, Humboldt County, Nevada, United States. The new mineral forms spheroidal, fibrous segregations; the thickness of the fibers, which extend along the c axis, reaches 20 μm, and the diameter of spherulites is up to 2.5 mm. The color is dark green to brown with a light green to beige streak and a vitreous luster. The mineral is translucent. The Mohs hardness is 5. Zinclipscombite is brittle; cleavage is not observed; fracture is uneven. The density is 3.65(4) g/cm³ measured by hydrostatic weighing and 3.727 g/cm³ calculated from X-ray powder data. The frequencies of absorption bands in the infrared spectrum of zinclipscombite are (cm^?1; the frequencies of the strongest bands are underlined; sh, shoulder; w, weak band) 3535, 3330sh, 3260, 1625w, 1530w, 1068, 1047, 1022, 970sh, 768w, 684w, 609, 502, and 460. The Mössbauer spectrum of zinclipscombite contains only a doublet corresponding to Fe³⁺ with sixfold coordination and a quadrupole splitting of 0.562 mm/s; Fe²⁺ is absent. The mineral is optically uniaxial and positive, ω = 1.755(5), ? = 1.795(5). Zinclipscombite is pleochroic, from bright green to blue-green on X and light greenish brown on Z (X > Z). Chemical composition (electron microprobe, average of five point analyses, wt %): CaO 0.30, ZnO 15.90, Al₂O₃ 4.77, Fe₂O₃ 35.14, P₂O₅ 33.86, As₂O₅ 4.05, H₂O (determined by the Penfield method) 4.94, total 98.96. The empirical formula calculated on the basis of (PO₄,AsO₄)₂ is (Zn_0.76Ca_0.02)_Σ0.78(Fe _1.72 ³⁺ Al_0.36)_Σ2.08[(PO₄)_1.86(AsO₄)_0.14]_Σ2.00(OH)_{1. 80} · 0.17H₂O. The simplified formula is ZnFe ₂ ³⁺ (PO₄)₂(OH)₂. Zinclipscombite is tetragonal, space group P4₃2₁2 or P4₁2₁2; a = 7.242(2) Å, c = 13.125(5) Å, V = 688.4(5) ų, Z = 4. The strongest reflections in the X-ray powder diffraction pattern (d, (I, %) ((hkl)) are 4.79(80)(111), 3.32(100)(113), 3.21(60)(210), 2.602(45)(213), 2.299(40)(214), 2.049(40)(106), 1.663(45)(226), 1.605(50)(421, 108). Zinclipscombite is an analogue of lipscombite, Fe²⁺Fe ₂ ³⁺ (PO₄)₂(OH)₂ (tetragonal), with Zn instead of Fe²⁺. The mineral is named for its chemical composition, the Zn-dominant analogue of lipscombite. The type material of zinclipscombite is deposited in the Mineralogical Collection of the Technische Universität Bergakademie Freiberg, Germany.     

Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-loaded porous carbons developed from rice husk for removal of arsenate from aqueous solution

A simple one-step synthetic approach using rice husk has been developed to prepare magnetic Fe₃O₄-loaded porous carbons composite (MRH) for removal of arsenate (As(V)). The characteristics of adsorbent were evaluated by transmission electron microscope, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller analysis, and thermogravimetric analysis. On account of the combined advantages of rice husk carbons and Fe₃O₄ nanoparticles, the synthesized MRH composites showed excellent adsorption efficiency for aqueous As(V). The removal of As(V) by the MRH was studied as a function of contact time, initial concentration of As(V), and media pH. The adsorption kinetics of As(V) exhibited a rapid sorption dynamics by a pseudo-second-order kinetic model, implying the mechanism of chemisorption. The adsorption data of As(V) were fitted well to the Langmuir isotherm model, and the maximum uptake amount (q _m ) was calculated as 4.33 mg g^?1. The successive regeneration and reuse studies showed that the MRH kept the sorption efficiencies over five cycles. The obtained results demonstrate that the MRH can be utilized as an efficient and low-cost adsorbent for removal of As(V) from aqueous solutions.     

Crystal chemistry of selenates with mineral-like structures. IV. Crystal structure of Zn(SeO<Subscript>4</Subscript>)(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>, a new compound with a mixed framework of the variscite type

The crystal structure of a new compound Zn(SeO₄)(H₂O)₂ (orthorhombic, Pbca, a = 9.0411(13), b = 10.246(2), c = 10.3318(15) Å, V = 957.1(3) ų) has been solved by direct methods and refined to R ₁ = 0.033 on the basis of 1076 observed reflections with |F _hkl | ≥ 4σ|F _hkl |. The structure contains one independent Zn²⁺ cation coordinated by two water molecules and four oxygen atoms of selenate group. The only independent (SeO₄)^2? tetrahedral oxoanion is tetradentate, sharing its corners with four adjacent [Zn²⁺O₂(H₂O₄)]²⁺ octahedrons. The structure can be described as consisting of heteropolyhedral sheets parallel to the (001) plane and linked together into a three-dimensional network. The compound belongs to the variscite structure type and is the first structurally characterized selenate of this group.     

Low-temperature behaviour of ammonium ion in buddingtonite [N(D/H)<Subscript>4</Subscript>AlSi<Subscript>3</Subscript>O<Subscript>8</Subscript>] from neutron powder diffraction

The structural response of buddingtonite [N(D/H)₄AlSi₃O₈] on cooling has been studied by neutron diffraction. Data have been collected from 280 K down to 11 K, and the crystal structure refined using the Rietveld method. Rigid-body constraints were applied to the ammonium ion to explore the structural properties of ammonium in the M-site cavities at low-temperature. Low-temperature saturation is observed for almost all the lattice parameters. From the present in situ low-temperature neutron diffraction studies, there is no strong evidence of orientational order–disorder of the ammonium ions in buddingtonite.     

High-pressure Raman studies and heat capacity measurements on the MgSiO<Subscript>3</Subscript> analogue CaIr<Subscript>0.5</Subscript>Pt<Subscript>0.5</Subscript>O<Subscript>3</Subscript>

Raman spectroscopy and heat capacity measurements have been used to study the post-perovskite phase of CaIr_0.5Pt_0.5O₃, recovered from synthesis at a pressure of 15 GPa. Laser heating CaIr_0.5Pt_0.5O₃ to 1,900 K at 60 GPa produces a new perovskite phase which is not recoverable and reverts to the post-perovskite polymorph between 20 and 9 GPa on decompression. This implies that Pt-rich CaIr_1−xPt_xO₃ perovskites including the end member CaPtO₃ cannot easily be recovered to ambient pressure from high P–T synthesis. We estimate an increase in the thermodynamic Grüneisen parameter across the post-perovskite to perovskite transition of 34%, of similar magnitude to those for (Mg,Fe)SiO₃ and MgGeO₃, suggesting that CaIr_0.5Pt_0.5O₃ is a promising analogue for experimental studies of the competition in energetics between perovskite and post-perovskite phases of magnesium silicates in Earth’s lowermost mantle. Low-temperature heat capacity measurements show that CaIrO₃ has a significant Sommerfeld coefficient of 11.7 mJ/mol K² and an entropy change of only 1.1% of Rln2 at the 108 K Curie transition, consistent with the near-itinerant electron magnetism. Heat capacity results for post-perovskite CaIr_0.5Rh_0.5O₃ are also reported.