Evaluation of effective nutritional parameters for <Emphasis Type="Italic">Scenedesmus</Emphasis> sp. microalgae culturing in a photobioreactor for biodiesel production

Recently, microalgae are considered as lipid sources for biodiesel production. A photobioreactor was designed and fabricated for Scenedesmus sp. microalgae cultivation. The effect of several nitrogen sources, light intensity, iron ions, silicon, magnesium sulfate and ethanol concentrations on Scenedesmus sp. microalgae growth were investigated. For incubation period of 8 days, sodium nitrate and ammonium carbonate were the best nitrogen sources with biomass concentrations of 2.373 and 2.254 g L^?1, respectively. Microalgae growth was reduced using nitrogen concentrations above 0.7 g L^?1. In the first 10 days of incubation, maximum cell dry weight (0.7 g L^?1) was obtained with light intensity of 10,000 lx, whiles after that, the results were desired (1 g L^?1) using interior lighting at 7500 lx. Magnesium sulfate had a positive effect on cell growth. The biomass concentration of 1.65 g L^?1 was obtained using 0.06 g L^?1 magnesium sulfate. Maximum obtained biomass with silicon (0.7 Mm), ethanol (1.8 mL L^?1) and ferric ammonium citrate (0.02 g L^?1) was 1.7 and 1.3 and 2.16 g L^?1, respectively. Logistic model was found to be a suitable model for cell growth forecast. Fatty acid analysis showed that composition of the most dominant synthesized fatty acids, palmitic and oleic acids, was 21.16 and 33.58%, respectively. Oil produced by Scenedesmus sp. microalgae composed of 49.08% saturated and 43.53% unsaturated fatty acids has a suitable composition for a desired biodiesel.     

Ameliorating nitrite inhibition in a low-temperature nitritation–anammox MBBR using bacterial intermediate nitric oxide

The long-term sustainability of an anaerobic ammonium oxidation (anammox) process in a moving bed biofilm reactor (MBBR) treating highly concentrated (mean of 740 mg NH₄ ⁺-N L^?1) wastewater was demonstrated by 1600 days of efficient operation. A high maximum total nitrogen removal rate (TNRR) of 1.5 g N m^?2 d^?1 was achieved at the low temperature of 20 °C. For nitrogen removal recovery in cases of nitrite inhibition, anammox intermediate nitric oxide (NO) was tested in batch experiments as an N-removal accelerating agent. The effect of the addition of various NO dosages (8–72 mg NO-N L^?1) was studied under inhibitory nitrite concentrations (>100 mg NO₂ ^?-N L^?1) for anammox bacteria. Optimal maintained NO concentration was 58 mg NO-N L^?1 and brought about the highest biofilm-specific anammox activity (SAA). Compared to a blank test, the minimum concentration of added NO of 40 mg NO-N L^?1 showed a statistically significant (p < 0.05) accelerating effect on SAA. No inhibition of SAA by NO was observed, although at NO concentrations exceeding 72 mg NO-N L^?1, the acceleratory effect upon SAA was decreased by 8%. Changes in the bacterial consortia involved in nitrogen conversion were determined concurrently for the different nitrogen removal rates and operational conditions. Quantities of Planctomycetales clone P4 strains, which are the closest (99% similarity) relative to Candidatus Brocadia fulgida, increased from 1 × 10³ to 1 × 10⁶ anammox gene copies per g total suspended solids during reactor operation days 568–1600, which was determined by quantitative polymerase chain reaction. During the operation of the MBBR, the abundance of ammonium-oxidizing bacteria (AOB) increased proportionally (up to 30%). The abundance of nitrite-oxidizing bacteria (NOB) did not increase (remaining below 10%) during days 232–860. AOB became predominant over NOBs owing to the inhibition of free ammonia spiking on NOBs.     

Exploring the diverse potentials of <Emphasis Type="Italic">Planococcus</Emphasis> sp. TRC1 for the deconstruction of recalcitrant kraft lignin

Kraft lignin (KL) is the chief contaminant which is responsible for dark coloration, toxicity and high chemical oxygen demand (COD) of paper pulp mill effluent. The present study investigated the diverse potentials of Planococcus sp. TRC1 in the biodegradation of KL. Preliminary evaluation indicated that the strain was able to grow on broad spectrum of lignin-derived compounds, decolorize lignin-mimicking dyes and catabolize substrates of ligninolytic enzymes. Response surface methodology (RSM) was executed to perform the optimization of different process parameters. The results displayed that Planococcus sp. TRC1 could completely utilize 100 mg L^?1 of KL and 78% of 200 mg L^?1 of KL as sole source of carbon with concurrent reduction in COD and color. The biokinetic details of KL biodegradation showed that the values of \(\mu^{*}\), µ _max, \(q^{*}\) and q _max were 0.018 h^?1, 0.01 h^?1, 0.023 g g^?1 h^?1 and 0.05 g g^?1 h^?1, respectively. UV–visible spectrophotometry, SEM and FTIR indicated the significant alterations in the surface morphology, functional groups and chromophores during the course of biodegradation. XRD revealed the emergence of peak signifying the formation of low molecular weight intermediates after bacterial treatment. Considering the environmental impact, bacterial-treated KL illustrated less phytotoxicity using Vigna radiata seed bioassay. These results suggested that Planococcus sp. TRC1 could be a promising strain for the degradation of KL in an ecofriendly way.     

Evaluation of tropical seaweeds as feedstock for bioethanol production

Limited resources of freshwater and decreasing fossil fuel resources are two main reasons to consider the ocean as a huge resource for producing food, feed, fertilizer and feedstock for fuel. In this study, twenty-nine tropical seaweeds (11 green, 10 red and 8 brown seaweeds) collected in Malaysia were assessed as potential feedstock for bioethanol production. Total carbohydrate content ranged from 12.16 to 71.22% dry weight (DW) with total reducing sugar content ranging from 5.17 to 34.12% DW. During hydrolysis using dilute sulphuric acid, the dominant fermentation inhibitors were 5-hydroxymethylfurfural and phenolic compounds. Overliming was found to reduce the content of fermentation inhibitors by up to 79%. The red seaweeds, Kappaphycus alvarezii (Doty) Doty ex P.C.Silva and Gracilaria manilaensis Yamamoto and Trono, were selected for optimization of saccharification and fermentation of the hydrolysate, because they had the highest carbohydrate contents and are commercially cultivated. The most suitable dilute acid conditions obtained in present study was sulphuric acid (2.5%, w v^?1) treatment at 121 °C for 40 min that produced 0.29 and 0.34 g g^?1 DW reducing sugar for K. alvarezii and G. manilaensis, respectively. Fermentation of the hydrolysates with Saccharomyces cerevisiae produced bioethanol yields of 20.90 g L^?1 (71.0% of theoretical yield) for K. alvarezii and 18.16 g L^?1 (67.9% theoretical yield) for G. manilaensis.     

The effects of petroleum-contaminated soil on photosynthesis of <Emphasis Type="Italic">Amorpha fruticosa</Emphasis> seedlings

A pot experiment was conducted to monitor the dynamic response of photosynthesis of Amorpha fruticosa seedlings to different concentrations of petroleum-contaminated soils from April to September. The results showed that the photosynthetic rates, stomatal conductance and transpiration rate of seedlings significantly decreased in 5–20 g kg^?1 petroleum-contaminated soil during the three given sampling period of July 31 (early), August 30 (mid-term) and September 29 (late). However, the intercellular CO₂ concentration significantly increased in 10 g kg^?1 contaminated soil, while declined in 20 g kg^?1 contaminated soil during the early sampling period as well as in 20 g kg^?1 contaminated soil during the late sampling period. The leaf relative water content of seedlings significantly increased in 20 g kg^?1 contaminated soil during the early sampling period, while it dropped dramatically in 15–20 g kg^?1 contaminated soil during the late sampling period. The contents of chlorophyll a, chlorophyll b and the total chlorophyll of seedlings showed a sharp decline during the three sampling periods in contaminated soil. Comprehensively, considering the negative effects of petroleum on the photosynthesis, growth performance and remediation effect on petroleum of A. fruticosa seedlings, this plant was tolerant of petroleum-contaminated soil and was potentially useful for the phytoremediation of petroleum-contaminated sites in northern Shaanxi, China.     

Distribution of cadmium among multimedia in Lake Qinghai,China

Lake Qinghai in the Qinghai-Tibet plateau is the largest lake in China. This study firstly reported the geochemistry of Cd in the lake. Water samples were collected from Lake Qinghai (n = 69) and Buha River (n = 12), while sediment (n = 22) and topsoil (n = 45) samples were collected from the lake and around the lake area, respectively. In addition, pore water samples (n = 20) were separated from sediment samples. Water samples were analyzed for pH, K, Na, Ca, Mg, Cl, S, and Cd, while sediment and topsoil samples were analyzed for K, Na, Ca, Mg, Al, Fe, Mn, S, Sc, and Cd. The average concentration of Cd was 0.014 μg L^?1 in the water of Lake Qinghai and 0.007 μg L^?1 in the water of Buha River. However, the average concentration of Cd was 0.320 μg L^?1 in the sediment pore water, much higher than that in the lake water and river water. Cadmium concentration in the lake water might be mainly controlled by salinity, while it in the pore water might be mainly controlled by carbonate minerals. Cadmium concentration in the river water might be controlled by alkalinity and pH. The average concentration of Cd in the sediment was 0.284 mg kg^?1. The enrichment of Cd in the lake sediment was significantly higher than that in the topsoil around the lake. Anthropogenic atmospheric deposition of Cd did not led to the increase in dissolved Cd level in the lake water, but led to its enrichment in the lake sediment.     

Removal of acetaminophen from hospital wastewater using electro-Fenton process

The current work deals with efficient removal of acetaminophen (AC) from hospital wastewater using electro-Fenton (EF) process. The degradation yield of 99.5% was obtained under optimal experimental conditions, namely 5.75 mg L^?1 initial AC concentration, 2.75 pH solution, 3-cm inter-electrode distance, 100 mg L^?1 KCl electrolyte, 122.5 µL L^?1 H₂O₂, 8 mA cm^?2 current density at equilibrium time of 8 min. Analysis of variance (ANOVA) suggested that the effect of mentioned operating parameters was statistically significant on the AC removal. The low probability amount of P value (P < 0.0001), the Fisher’s F-value of 65.91, and correlation coefficient of the model (R² = 0.9545) revealed a satisfactory correlation between the experimental and the predicted values of AC removal. The predicted removal efficiency of 99.4% was in satisfactory agreement with the obtained experimental removal efficiency of 98.7%. The AC degradation during the EF followed a first-order kinetic model with rate constants (K_app) of 0.6718 min^?1. Using the ordinary radical scavengers revealed that main mechanism of AC degradation controlled by the hydroxyl free radicals produced throughout the EF process. The excess amount of iron (II) scavenged the active radicals and diminished the concentration of ^·OH available to react with AC. The optimum molar ratio of H₂O₂ to Fe²⁺ was found to be 2.5. The developed EF process as a promising technique applied for treatment of real samples.     

Co-metabolic decolorization of a textile reactive dye by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis>

In the present study, a widely used reactive dye, Color Index (C.I.) Reactive Blue 268 was utilized for mycoremediation by Aspergillus fumigatus isolated from textile effluent. Complete decolorization of the test dye (0.1 g L^?1) was recorded within 6 days of static incubation at 27 °C in Czapek Dox broth (CDB). However, the isolate was unable to utilize the dye as a sole source of energy in Czapek Dox agar and CDB in absence of sucrose and obligate requirement of a labile carbon source, i.e., sucrose needed for induction of decolorization. Biosorption seems to play the pivotal role in decolorization as evident by coloring of the fungal biomass as that of dye color. The optimal conditions for the highest decolorization were found at 30 °C and pH 6.0 with 6-day-old inoculums supplemented with sucrose (10 g L^?1) and ammonium chloride (2 g L^?1) as a carbon and nitrogen source, respectively. The response of the isolate to increasing dye concentrations was found to be growth inhibitory. Surprisingly, about 65 % of dye decolorization was recorded with heat-inactivated biomass powder within 6 days of static incubation supporting the fact of fungal biosorption. Results of this study have established the candidature of the isolate for biotechnological removal of dyes from disreputable dying effluents.     

Impact of rainfall intensity on the hydrological performance of erosion control geotextiles

The impact of erosion control geotextiles on the surface runoff from slopes is quite variable and depends strongly on site-specific conditions (soil characteristics, slope morphology, climate, etc.), as has been shown in several earlier studies. In addition, little is known about the proportion of runoff reduction that is caused by the geotextile and the proportion that is caused by soil characteristics. To shed more light on this issue, an experiment was carried out to test the impact of 500 g m^?2 jute nets (J500) and 400 g m^?2; 700 g m^?2 coir nets (C400, C700) on the surface runoff from simulated rainfall of four different intensities (I ₁ = 18.7; I ₂ = 27.2; I ₃ = 53.6; I ₄ = 90.5 mm h^?1). Data on runoff volume, peak discharge and time to peak discharge were collected from 40 simulated rainfall events. An impermeable “no-soil” subgrade was used to examine the impact of the geotextile on runoff without any influence of soil. All tested geotextiles significantly reduced runoff (volume, peak discharge) at all rainfall intensities, with the exception of C400 and C700 during simulated rainfall intensity I ₄. J500 seemed to have the most effective runoff reduction performance at all rainfall intensities. In general, as the rainfall intensity increased, the effectiveness of the geotextiles decreased. Interesting behaviour was observed for J500 under simulated rainfall intensity I ₄—the effectiveness of the geotextile increased with the duration of the rainfall.     

Optimization and design of a continuous biosorption process using brown algae and chitosan/PVA nano-fiber membrane for removal of nickel by a new biosorbent

In this study, nickel ions adsorption from zinc ingot factory wastewater by brown algae (Sargassum glaucescens) and chitosan/polyvinyl alcohol nano-fiber membrane at continuous system was studied. The continuous process included a biosorption reactor and fixed-bed reactor that were optimized by predicting two batch steps with response surface modeling, based on the Box–Behnken in the novel approach. Nano-biosorbent characterized by scanning electron microscopy, Brunauer–Emmett–Teller and Fourier transform infrared spectrometer analysis. Maximum biosorption in this continuous system was at pH 6, biosorbent doses 8 g L^?1 S. glaucescens and 0.48 g L^?1 nano-fiber. The study of the reaction rate showed kinetic data best fitted by pseudo-first-order model with R ² > 0.95 than pseudo-second-order and intraparticle diffusion models. Biosorption equilibrium data were performed using Langmuir isotherm and Freundlich isotherm, Langmuir isotherm fit better with equilibrium data.     

The Influence of Benthic Macrofauna on the Erodibility of Intertidal Sediments with Varying mud Content in Three New Zealand Estuaries

Fine sediment inputs can alter estuarine ecosystem structure and function. However, natural variations in the processes that regulate sediment transport make it difficult to predict their fate. In this study, sediments were sampled at different times (2011–2012) from 45 points across intertidal sandflat transects in three New Zealand estuaries (Whitford, Whangamata, and Kawhia) encompassing a wide range in mud (≤63 μm) content (0–56 %) and macrofaunal community structure. Using a core-based erosion measurement device (EROMES), we calculated three distinct measures of sediment erosion potential: erosion threshold (? _c ; N m^?2), erosion rate (ER; g m^?2 s^?1), and change in erosion rate with increasing bed shear stress (m _e ; g N^?1 s^?1). Collectively, these measures characterized surface (? _c and ER) and sub-surface (m _e ) erosion. Benthic macrofauna were grouped by functional traits (size and motility) and data pooled across estuaries to determine relationships between abiotic (mud content, mean grain size) and biotic (benthic macrofauna, microbial biomass) variables and erosion measures. Results indicated that small bioturbating macrofauna (predominantly freely motile species <5 mm in size) destabilized surface sediments, explaining 23 % of the variation in ? _c (p ≤ 0.01) and 59 % of the variation in ER (p ≤ 0.01). Alternatively, mud content and mean grain size cumulatively explained 61 % of the variation in m _e (p ≤ 0.01), where increasing mud and grain size stabilized sub-surface sediments. These results highlight that the importance of biotic and abiotic predictors vary with erosion stage and that functional group classifications are a useful way to determine the impact of benthic macrofauna on sediment erodibility across communities with different species composition.     

Spatio-temporal variations of respirable particles at residential areas located in the vicinity of opencast coal projects,India: a case study

The objective of the study is to investigate spatio-temporal variations of PM₁₀, PM_2.5, and PM₁ concentrations at seven residential sites, located in the vicinity of opencast coal projects, Basundhara Garjanbahal Area (BGA), India. Meteorological parameters such as wind speed, wind direction, relative humidity, and temperature were collected simultaneously with PM concentrations. Mean concentrations of PM₁₀ in the range 215 ± 169–526 ± 412 μg m^?3, PM_2.5 in the range of 91 ± 79–297 ± 107 μg m^?3, PM₁ in the range of 68 ± 60–247 ± 84 μg m^?3 were obtained. Coarse fractions (PM_2.5–10) varied from 27 to 58% whereas fine fractions (PM_1–2.5 and PM₁) varied in the range of 51–73%. PM_2.5 concentration was 41–74% of PM₁₀ concentration, PM₁ concentration was 31–62% of PM₁₀ concentration, and PM₁ concentration was 73–83% of PM_2.5 concentration. Role of meteorology on PM concentrations was assessed using correlation analysis. Linear relationships were established among PM concentrations using least square regression analysis. With the aid of principal component analysis, two components were drawn out of eight variables, which represent more than 75% of variance. The results indicated that major sources of air pollutants (PM₁₀, PM_2.5, PM₁, CO, CO₂) at the residential sites are road dust raised by vehicular movement, spillage of coal generated during transportation, spontaneous combustion of coal, and biomass burning in village area.     

Dynamics of carbon fluxes with responses to vegetation,meteorological and terrain factors in the south-eastern Tibetan Plateau

Tibetan Plateau (TP) is the highest and most extensive plateau in the world and has been known as the roof of the world, and it is sensitive to climate change. The researches of CO₂ fluxes (F _C) in the TP region play a significant role in understanding regional and global carbon balance and climate change. Eddy covariance flux measurements were conducted at three sites of south-eastern TP comprising Dali (DL, cropland ecosystem), LinZhi (LZ, alpine meadow ecosystem) and Wenjiang (WJ, cropland ecosystem); amongst those DL and LZ are located in plateau region, while WJ is in plain region. Dynamics of F _C and influences of vegetation, meteorological (air temperature, photosynthetically active radiation, soil temperature and soil water content) and terrain factors (altitude) were analysed on the basis of data taken during 2008. The results showed that, in the cool sub-season (March, April, October and December), carbon sink appeared even in December with fluxes of (?0.021 to ?0.05) mg CO₂ m^?2 s^?1 and carbon source only in October (0.03 ± 0.0048) mg CO₂ m^?2 s^?1 in DL and WJ site. In LZ site, carbon sink was observed in April: (?0.036 ± 0.0023) mg CO₂ m^?2 s^?1 and carbon sources in December and March (0.008–0.010 mg CO₂ m^?2 s^?1). In the hot sub-season (May–August), carbon source was observed only in May with (0.011 ± 0.0022), (0.104 ± 0.0029) and (0.036 ± 0.0017) fluxes in LZ, DL and WJ site, respectively, while carbon sinks with (?0.021 ± 0.0041), (?0.213 ± 0.0007) and (?0.110 ± 0.0015) mg CO₂ m^?2 s^?1 fluxes in LZ, DL, and WJ, respectively. Comparing with plain region (WJ), carbon sinks in plateau region (DL and LZ) lasted for a longer time, and the absorption sum was large and up to (–357.718 ± 0.0054) and (?371.111 ± 0.0039) g C m^?2 year^?1, respectively. The LZ site had the weakest carbon sink with (?178.547 ± 0.0070) g C m^?2 year^?1. Multivariate analysis of covariance showed that altitude (AL) as an independent factor explained 39.5 % of F _C (P < 0.026). F _C had a quadratic relationship with Normalized difference vegetation index (NDVI) (R ² ranges from 0.485 to 0.640 for three sites), an exponential relationship with soil temperature at 5-cm depth (ST ₅) at night time and a quadratic relationship with air temperature (T _a) at day time. Path analysis indicated that photosynthetically active radiation (PAR), sensible heat fluxes (H) and other factors all had direct or indirect effects on F _C in all of the three tested sites around the south-eastern TP.     

Potential of <Emphasis Type="Italic">Micranthemum umbrosum</Emphasis> for phytofiltration of organic arsenic species from oxic water environment

Arsenic (As) is a toxic and carcinogenic metalloid that causes various hazards to human health. Phytofiltration is a more eco-friendly and green approach than chemoremediation, or other traditional technologies, for removing As from aquatic environments. Recently, Micranthemum umbrosum was shown as a promising candidate for phytofiltration of inorganic As species. This work examines the potential application of M. umbrosum to phytofiltration of organic As species, such as monomethylarsonic acid (MMAA, CH₅AsO₃) and dimethylarsinic acid (DMAA, C₂H₇AsO₂), from oxic water environments. M. umbrosum plants were grown in two test concentrations of MMAA and DMAA, or a control, in a hydroponic experiment. After seven days, leaves accumulated 90 ± 3.2 and 48 ± 1.6 µg As g^?1 (oven dry basis) from 1 µg As mL^?1 of water added from MMAA and DMAA, respectively. Bioconcentration factor values and translocation factor values were always greater than 1.0, indicating that M. umbrosum was a good As accumulator and that leaves accumulated significantly higher amounts of As than stems and roots. Analysis of macro- and micronutrient data showed that M. umbrosum had higher resistance to organic As treatments than the control. These results confirm the potential application of M. umbrosum for phytofiltration of organic As from contaminated oxic water environments.     

Tunisian landfill leachate treatment using <Emphasis Type="Italic">Chlorella</Emphasis> sp.: effective factors and microalgae strain performance

The potential of the autoclaved Tunisian landfill leachate treatment using microalgae (Chlorella sp.) cultivation was investigated in this study. Landfill leachate was collected from Borj Chakir landfill, Tunisia. A full factorial experimental design 2² was proposed to study the effects of the incubation time and leachate ratio factors on the organic matter removal expressed in chemical oxygen demand (COD) and ammoniacal nitrogen (NH₄─N) and on the biological response of Chlorella sp. expressed by the cell density and chlorophyll content. All experiments were batch runs at ambient temperature (25 ± 2 °C). The Chlorella sp. biomass and chlorophyll a concentrations of 1.2 and 5.32 mg L^?1, respectively, were obtained with 10% leachate spike ratio. The obtained results showed that up to 90% of the ammoniacal nitrogen in landfill leachate was removed in 10% leachate ratio spiked medium with a residual concentration of 40 mg L^?1. The maximum COD removal rate reached 60% within 13 days of incubation time indicating that microalgae consortium was quite effective for treating landfill leachate organic contaminants. Furthermore, with the 10% leachate ratio spiked medium, the maximum lipid productivity was 4.74 mg L^?1 d^?1. The present study provides valuable information for potential adaptation of microalgae culture and its contribution for the treatment of Tunisian landfill leachate.     

Determination of atrazine isotherms on agricultural soils

For determination of atrazine isotherms in agricultural soils of Fars Province, composite soil samples from 0 to 5 cm depth with textures of silty clay loam, clay loam and loam were collected. In order to form the atrazine isotherms, 10, 50 and 100 µg atrazine g^?1 soil was added to the soil samples. Soluble atrazine in water:soil ratios of 10:1, 50:1 and 200:1 was measured after 3-h shaking. Finally, for each cases of applied atrazine, water extractable atrazine was determined and quantified using gas chromatography instrument. The results indicated that there was a linear relationship between the logarithms of water extractable atrazine and added atrazine for different water:soil ratios. A general equation of WEA = K(WS) ^α (AA) ^β is obtained experimentally between water extractable atrazine, µg g^?1(WEA), and added atrazine, µg g^?1 (AA), where K, α and β are absorption constants; WS is the water:soil ratio, g g^?1. For the loam, silty clay loam and clay loam soil textures, the α were 0.49, 0.23 and 0.13, respectively, the β were 0.55, 0.806 and 0.21, respectively, and the K were 1.44, 0.78 and 25.38, respectively.     

Multi-decade Responses of a Tidal Creek System to Nutrient Load Reductions: Mattawoman Creek,Maryland USA

We developed a synthesis using diverse monitoring and modeling data for Mattawoman Creek, Maryland, USA to examine responses of this tidal freshwater tributary of the Potomac River estuary to a sharp reduction in point-source nutrient loading rate. Oligotrophication of these systems is not well understood; questions concerning recovery pathways, threshold responses, and lag times remain to be clarified and eventually generalized for application to other systems. Prior to load reductions Mattawoman Creek was eutrophic with poor water clarity (Secchi depth <0.5 m), no submerged aquatic vegetation (SAV), and large algal stocks (50–100 μg L^?1 chlorophyll-a). A substantial modification to a wastewater treatment plant reduced annual average nitrogen (N) loads from 30 to 12 g N m^?2 year^?1 and phosphorus (P) loads from 3.7 to 1.6 g P m^?2 year^?1. Load reductions for both N and P were initiated in 1991 and completed by 1995. There was no trend in diffuse N and P loads between 1985 and 2010. Following nutrient load reduction, NO₂?+?NO₃ and chlorophyll-a decreased and Secchi depth and SAV coverage and density increased with initial response lag times of one, four, three, one, and one year, respectively. A preliminary N budget was developed and indicated the following: diffuse sources currently dominate N inputs, estimates of long-term burial and denitrification were not large enough to balance the budget, sediment recycling of NH₄ was the single largest term in the budget, SAV uptake of N from sediments and water provided a modest seasonal-scale N sink, and the creek system acted as an N sink for imported Potomac River nitrogen. Finally, using a comparative approach utilizing data from other shallow, low-salinity Chesapeake Bay ecosystems, strong relationships were found between N loading and algal biomass and between algal biomass and water clarity, two key water quality variables used as indices of restoration in Chesapeake Bay.     

Stability of Titanium Dioxide Nanoparticle Agglomerates in Transitional Waters and Their Effects Towards Plankton from Lagoon of Venice (Italy)

The present study explores the effect of salinity and dissolved organic carbon (DOC) gradients on the stability and reactivity of titanium dioxide nanoparticle (TiO₂-NP) agglomerates in ambient water from the Lagoon of Venice and their possible effect on nauplii sampled at the same locations. In all ambient water samples, TiO₂-NPs formed rapidly micrometre-sized agglomerates. The increase in the salinity and concomitant decrease in DOC content induced the formation of larger agglomerates, with z-average hydrodynamic diameter increasing with TiO₂-NP concentration and exposure duration. Under the studied conditions, ζ-potential exhibited negative values. In line with agglomeration results, enhancement of the salinity and lower DOC resulted in less negative ζ-potential with close to 0 values in the dispersions of 100 mg L^?1 TiO₂-NPs in sea water. Two-hour exposure to micrometre-sized agglomerates of TiO₂-NPs resulted in an increase in the fluorescence of propidium iodide (PI) stained nauplii in comparison with unexposed controls, but had no effect at 24-h exposure. The increase in nauplii-associated PI fluorescence was more noticeable in dispersions containing 100 mg L^?1 than those containing 10 mg L^?1 TiO₂-NPs, suggesting membrane permeability alteration in a concentration-dependent manner. However, the PI staining results have to be interpreted with caution because of the possible dye binding to the nauplii surface without penetration of cellular membrane. The effect of TiO₂-NPs on nauplii was more pronounced at higher salinity and decreased with increasing DOC concentrations at 2 h, while no trends were found at 24-h exposure, as well as exposure to 100 mg L^?1 TiO₂-NPs.     

Carbon Dioxide Fluxes and Their Environmental Control in a Reclaimed Coastal Wetland in the Yangtze Estuary

Large areas of natural coastal wetlands have suffered severely from human-driven damages or conversions (e.g., land reclamations), but coastal carbon flux responses in reclaimed wetlands are largely unknown. The lack of knowledge of the environmental control mechanisms of carbon fluxes also limits the carbon budget management of reclaimed wetlands. The net ecosystem exchange (NEE) in a coastal wetland at Dongtan of Chongming Island in the Yangtze estuary was monitored throughout 2012 using the eddy covariance technique more than 14 years after this wetland was reclaimed using dykes to stop tidal flooding. The driving biophysical variables of NEE were also examined. The results showed that NEE displayed marked diurnal and seasonal variations. The monthly mean NEE showed that this ecosystem functioned as a CO₂ sink during 9 months of the year, with a maximum value in September (?101.2 g C m^?2) and a minimum value in November (?8.2 g C m^?2). The annual CO₂ balance of the reclaimed coastal wetland was ?558.4 g C m^?2 year^?1. The ratio of ecosystem respiration (ER) to gross primary production (GPP) was 0.57, which suggests that 57 % of the organic carbon assimilated by wetland plants was consumed by plant respiration and soil heterotrophic respiration. Stepwise multiple linear regressions suggested that temperature and photosynthetically active radiation (PAR) were the two dominant micrometeorological variables driving seasonal variations in NEE, while soil moisture (M _s) and soil salinity (PS_s) played minor roles. For the entire year, PAR and daytime NEE were significantly correlated, as well as temperature and nighttime NEE. These nonlinear relationships varied seasonally: the maximum ecosystem photosynthetic rate (A _max), apparent quantum yield (?), and Q ₁₀ reached their peak values during summer (17.09 μmol CO₂?m^?2 s^?1), autumn (0.13 μmol CO₂?μmol^?1 photon), and spring (2.16), respectively. Exceptionally high M _s or PS_s values indirectly restricted ecosystem CO₂ fixation capacity by reducing the PAR sensitivity of the NEE. The leaf area index (LAI) and live aboveground biomass (AGB_L) were significantly correlated with NEE during the growing season. Although the annual net CO₂ fixation rate of the coastal reclaimed wetland was distinctly lower than the unreclaimed coastal wetland in the same region, it was quite high relative to many inland freshwater wetlands and estuarine/coastal wetlands located at latitudes higher than this site. Thus, it is concluded that although the net CO₂ fixation capacity of the coastal wetland was reduced by land reclamation, it can still perform as an important CO₂ sink.     

Lead removal from aqueous solution by basaltic scoria: adsorption equilibrium and kinetics

Pb-contaminated water is a dangerous threat occurring near metallurgic and mining industries. This circumstance produces serious environment concern, due to Pb(II) high toxic effects. Several reactive materials have been reported for Pb(II) adsorption, but not all reached final Pb(II) suitable concentrations, or they are expensive and rejected in massive remediation technologies; hence, natural materials are good options. The adsorption behavior of a volcanic scoria (two sieved fractions 1425 and <425 µm) was studied toward synthetic Pb(II) water solutions in batch experiments (170.4–912.3 mg L^?1) with high removal efficiencies (97%). The Langmuir model fits both fractions with high linear correlation coefficients (0.9988 and 0.9949) with high maximum capacity values (588.23 and 555.55 mg g^?1). Separation factor R _L parameter varies with initial concentration, and the empirical equation predicts the limits of the material usefulness, a criterion proposed in this paper for conditions’ selection. The Lagergren pseudo-second-order analysis demonstrates chemisorption; calculated rate constant (416.66 mg g^?1 min^?1). Weber–Morris intraparticle model proves that the adsorption phenomena occur fast on the material surface (k _inst = 72 g mg^?1 min^?0.5). The characterization of the volcanic material afforded the elemental composition (X-ray fluorescence), and the empirical formula was proposed. X-ray diffraction patterns verify the material structure as basalt, with a plagioclase structure that matches anorthite and albite, mostly composed of quartz. The presence of oxides on the material surface explain the high Pb(II) adsorption capacity, observed on the surface by scanning electronic microscopy. The studied volcanic scoria has potential use as a Pb(II) adsorbent in water remediation technologies.