真三轴应力条件下钻孔围岩塑性区及增透半径研究

深部岩体处于三维应力场中受开挖扰动影响钻孔、巷道围岩处于明显的真三轴应力状态。钻孔抽采技术是煤矿广泛用于瓦斯治理的重要措施,钻孔周围塑性区是瓦斯流动的优质通道,研究钻孔围岩塑性区特性对于抽采钻孔的优化布置至关重要。为研究钻孔围岩的塑性区特性,基于广义平面应变理论分析围岩应力分布,比较几种常用强度准则（MC、Mises、D-P、MLC、SMP）的适用性和精确性,对比试验结果表明,MLC准则能较好地表征岩石的真三轴强度特性。基于MLC准则推导了围岩塑性区半径公式,分析偏应力、中间主应力、岩石内摩擦角、岩石黏聚力和钻孔半径对增透半径的影响,结果表明,增透半径随着偏应力的增大而增大,随中间主应力的增加先减小后增大,随岩石内摩擦角、岩石黏聚力的增加而逐渐减小,随钻孔半径的增加而线性增大。研究结果可为实际工程中巷道支护、煤层瓦斯抽采等技术的参数设计等提供重要参考。     

岩爆和冲击地压的差异解析及深部工程地质灾害关键机理问题

岩爆和冲击地压原来在自然界并不存在,完全是由于人类进行深部地下空间利用、深部矿产资源开采等工程建设时诱发产生的,两者同属于最典型的深部工程地质灾害.由于历史原因,岩爆和冲击地压长期存在概念混用的情况.本文比较详细地综述了岩爆和冲击地压领域国内早期的研究历程,系统解析了岩爆和冲击地压之间存在的差异.在研究对象(硬岩和煤的...     

深部厚顶煤巷道围岩变形破坏机制模型试验研究

为研究深部厚顶煤巷道围岩变形破坏特性及其机制,以赵楼煤矿千米深井厚顶煤巷道为工程背景,开展了大比尺地质力学模型试验,对让压型锚索箱梁支护系统作用下的巷道围岩位移、应力演化规律进行的研究表明：巷道顶底板围岩竖向应力释放较两帮剧烈,水平应力释放反之,巷道顶板中部围岩是顶板竖向应力释放的主要部位。通过与现场试验结果对比验证,总结出深部厚顶煤巷道围岩变形破坏的3个主要特征：顶板变形破坏较两帮和底板严重、顶板围岩变形破坏主要发生在煤岩交界面以下的煤体中、巷中是顶板变形破坏的关键部位,并进一步分析了相应机制：顶板煤岩松软破碎、自承能力差、顶板及其巷中竖向应力释放相对更为剧烈、矩形巷道顶板受力状态差等因素,导致顶煤所受径向应力低,碎胀变形剧烈,且弯曲变形、离层严重,顶板受力结构恶化,最终导致顶板控制困难。     

弹脆性圆形煤巷应力跃升及冲击地压预测模型

为预测煤巷冲击地压灾害,将强冲击倾向煤视作理想弹脆性材料,建立圆形煤巷力学模型,分析煤巷围岩的应力和变形能密度分布特征,进而建立煤巷冲击地压预测模型,利用该模型预测冲击地压灾害风险。研究结果表明：弹脆性煤巷围岩的切向应力和变形能密度在弹性区与破坏区界面处发生跃升;煤体强度损伤度和地应力增大,煤巷破坏区半径增大,煤巷围岩切向应力和变形能密度跃升高度增大;切向应力跃升为煤巷失稳破坏提供了力源,变形能密度跃升为冲击地压发生提供了能量源;切向应力和变形能密度跃升高度越大,煤巷越容易失稳和冲击;基于切向应力和变形能密度跃升,建立了煤巷冲击地压解析预测模型,预测结果与现场冲击地压实际情况一致,从而为脆性煤巷冲击地压预测提供了一种新的方法。     

唐山矿区构造应力场特征及其对冲击地压的影响

河北唐山矿冲击地压的发生除了受开采技术条件、煤层顶底板岩石学特征等因素影响外,主要受赋存环境的影响,其中地应力条件是一个重要的影响因素。以唐山矿构造应力分布规律为背景,对不同水平构造应力条件下回采工作面煤层及其顶底板围岩的三维场进行了数值分析,系统研究了构造应力对煤层及其顶底板围岩的冲击地压的影响。结果表明,在煤矿开采过程中,高水平构造应力对采区煤层及其顶底板围岩的应力场和能量场的分布规律具有重要影响。高构造应力条件下,煤层及其顶底板围岩中的高水平应力为冲击地压的发生提供了力源条件,而在高地应力环境下所积聚的大量弹性应变能为冲击地压的发生提供了能量条件。      

PT3型岩石高压真三轴仪的研制

This paper introduces the structural characters and functions of the rock high pressure true triaxial machine newly developed and some research results with this machine. By the rock high pressure true triaxial machine, three principal stresses can be controlled and changed independently, so that any stress state and stress path in engineering rock mass and earth’s crust can be simulated. It is an important development of Karman type general triaxial machine. By RT3 type rock high pressure true triaxial machine, the maximum principal stress can be applied up to 800 MPa, the intermediate and minimum principal stress up to 200 MPa. The strains and parameters of sonic wave in the directions of three principal stresses can also be determined. The machine is used well for studying the basic theory on rock mechanics, the stability of engineering rock mass and the behaviors of earthquake precursors.     

特厚煤层小煤柱沿空掘巷数值分析及应用

沿空掘巷开采技术成功的关键主要取决于采场覆岩稳定的时间和沿空掘巷的位置。采场采动岩体运动导致围岩应力重新分布,动态采场应力作用于围岩并使其状态发生灾变是发生矿山灾害的根本原因。特厚煤层分层综采巷道布置（包括内错、外错和垂直）,合理确定煤柱尺寸、巷道支护方式和参数选择能够最大可能发挥围岩的自承能力,是提高巷道稳定的重要保证。在稳定的内应力场范围内布置小煤柱护巷,能够明显提高巷道围岩稳定状态,减少巷道维护费用。通过理论分析、数值模拟和现场实测等方法,对特厚煤层下分层沿空掘巷小煤柱不同巷道布置设计,通过煤柱的应力、应变和位移进行对比分析,确定特厚煤层下分层沿空掘巷合理的巷道位置和煤柱尺寸及上覆岩层防控技术,并得到工程验证是正确可靠的,从而为特厚煤层小煤柱开采技术提供了重要的科学依据。     

RT3型岩石高压真三轴仪的研制

本文介绍了新近研制成功的岩石高压真三轴仪的结构特点、功能和试验研究结果。岩石高压真三轴仪能够独立地控制和改变三个主应力,从而可模拟工程岩体和地壳内部的任何应力状态和应力途径,是对卡阿曼(Von.Karman)型普通三轴压缩仪的重大改进。RT3型岩石高压真三轴仪,可施加最大主应力到800MPa,中间主应力200MPa,最小主应力200MPa,并能测定三个主应力方向的应变和声波参数,可供岩石力学基础理论、工程岩体稳定性和地震前兆特性等研究之用。     

Post failure behaviour of a rock mass under the influence of triaxial and true triaxial confinement

In this paper results of triaxial and true triaxial testing conducted on physical models of a rock mass are used to describe its post failure behaviour. The specimens comprised of three continuous joint sets and were prepared from blocks of sand lime model material. The testing was performed using a True Triaxial System (TTS) developed by the authors. The results show strain hardening, strain softening and plastic behaviour in the simulated rock mass specimens depending upon joint geometry and stress state. Expressions are suggested to estimate post peak modulus in triaxial and true triaxial stress conditions. Finally, a zonation table is proposed to assess the strain hardening, softening and plasticity behaviour of a rock mass material with the help of joint geometry and confining stress conditions at site.     

唐口煤矿3上煤层冲击地压形成机制及防治措施

通过对唐口煤矿地应力、3上煤层及顶板岩层冲击地压测试结果分析,认为3上煤层属强冲击倾向性煤层,3上煤层顶板属弱冲击倾向性岩层;在采深1000m条件下,随着地应力的增大,煤、岩层的冲击倾向性将会增大。因3上煤层为易碎煤,厚度较大,顶板弹性能易突然全部释放,形成冲击地压;3上煤顶板主要为中砂岩、细砂岩及泥岩,质地坚硬,在煤层开采过程中,煤壁附近出易现高应力集中带,在顶板中聚集的弹性能在自重力和采掘干扰下会突然释放,形成冲击地压。在生产过程中采取钻屑法、沿采煤工作面轨道顺槽安装顶板离层报警系统、合理开拓避免应力集中和叠加、对煤层进行注水,降低煤体弹性和强度、提高支护结构的承载能力等一系列措施,较好地预防了冲击地压的发生。     

The Various Stress Paths Causing Deformation and Failure in Rocks

The rock deformation and failure tests are performed along various stress paths under true triaxial stress state. The experimental results have shown that the change of three principal stresses (the increase of the maximum principal stress, the decrease of the minimum principal stress, the decrease of the confining pressure and the increase or decrease of the intermediate principal stress ) can lead to deformation and failure in rocks. The strength, the deformability and the failure precursors of rocks are related with stress paths. Based on the results of the study, the problems of the stress path in rock engineering are discussed.     

岩体变形和破坏的各种应力途径

在真三轴应力状态下进行了各种应力途径的岩石变形和破坏实验。实验表明,三个主应力的变化(最大主应力的增加,最小主应力的减小,围压的减小以及中间主应力的增加或减小)都能引起岩石变形和破坏。而且岩石的强度、延性和脆性、体积变化和破坏前兆等都与应力途径有关。据根试验结果探讨了岩体工程中的应力途径问题。     

煤岩两体模型变形破坏数值模拟

采用拉格朗日元法,在弹性岩石与弹性-应变软化煤体所构成的平面应变两体模型的上、下端面上不存在水平方向摩擦力条件下,模拟了模型的破坏过程、岩石高度对模型及煤体全程应力-应变曲线、煤体变形速率、煤体破坏模式及剪切应变增量分布的影响。结果表明,当模型的全程应力-应变曲线达到峰值时煤体内部的剪切带图案已经十分明显,在模型的应变硬化阶段,煤体中的应变局部化可视为模型失稳破坏的前兆,随岩石高度的增加,模型应力-应变曲线的软化段变得陡峭,这与单轴压缩条件下的解析解在定性上是一致的;煤体应力-应变曲线的软化段变得平缓,煤体消耗能量的能力增强;弹性阶段煤体的变形速率降低;煤体内部的剪切应变增量增加。煤体应力-应变曲线的软化段的斜率、弹性阶段煤体的变形速率、煤体内部的剪切应变增量及塑性耗散能都受岩石高度的影响,说明了岩石几何尺寸对煤体的影响(煤岩相互作用)是不容忽视的。     

Changes in Frequency of Electromagnetic Radiation from Loaded Coal Rock

To understand the relationship between the frequency of electromagnetic radiation (EMR) emitted from loaded coal rock and the micro-crack structures inside it, and assess the stress state and the stability of coal rock by analyzing frequency changes in characteristics of its emitted EMR, we first experimentally studied the changes in time sequence and the frequency spectrum characteristics of EMR during uniaxial compression, then theoretically derived the relationship between the principal frequency of EMR signals and the mechanical parameters of coal crack and analyzed the major factors causing the changes in the principal frequency, and lastly verified the results at Nuodong Coal Mine, Guizhou Province, China. The experimental results showed that (1) EMR intensity increased with the applied stress on loaded coal rock during its deformation and failure and could qualitatively reflect the coal’s stress status; (2) with the applied stress increasing, the principal frequency gradually increased from near zero to about 60 kHz and then dropped to less than 20 kHz. During this period, coal rock first stepped into the linearly and elastically deformed stage and then ruptured around the peak load. Theoretical analysis showed that there was a negative correlation between the principle frequency and the size of internal cracks. Field detection showed that a lower principle frequency was generated from coal rock applied by a greater load, while a higher principal frequency was generated from coal rocks suffering a weaker load.     

Evolution and effect of the stress concentration and rock failure in the deep multi-seam coal mining

Supports crushing accident occasionally occurs in the protected seam exploitation of deep multi-seam coal mining structure and results in adverse effect to the production. To prevent its recurrence in a newly developed working field, a 3D numerical extraction model was built based on the geologic and mining conditions of Jining coal mine to evolve the changes, state and characteristics of the reconstructed vertical and lateral stress in rock interlayer after protective seam exploitation. Stress release and increase zones of this mining structure were separated. Mining-induced localized stress concentration and the interlayer rock failure behavior were explored. The action of concentrated stress on the hydraulic supports in protected seam was discussed upon the major stress redistribution. Using the infinitesimal strain method, a mechanical model was created to further explore, from the vertical and lateral directions, the cause and mechanism of localized stress concentration and rock failure behavior in rock interlayer. The field investigation was finally performed to verify the numerical and mechanical results, and the essential control measures were proposed to prevent this accident. Key findings of this study bring some new insights into the deep multi-seam coal extraction and help to promote a more reliable underground mining.     

条带法在底板承压水上采煤中应用的数值模拟研究

近年来,条带法被用来作为承压水上采煤的主要采煤方法。针对承压水上采煤问题,应用流固耦合原理,将孔隙介质中孔隙压力与应力建构在统一的本构模型中,平行计算应力场与渗流场,其实质是煤岩体体积应变对孔隙的影响通过流动本构定律加以反映;反之孔隙压力的变化可引起煤岩体变形。应用FLAC有限差分软件对条带式和长壁式采煤方法的应力发展和岩体破坏情况进行模拟并进行比较分析,证明条带法在降低由采动引起的应力影响范围和程度,从而减小煤层底板破坏程度和范围(主要是深度)的有效性,为合理确定承压水上采煤的开采方案提供了理论依据。     

坚硬顶板孤岛工作面冲击地压机理及前兆判别

以忻州窑矿8939工作面为工程背景,运用弹性板理论分析坚硬顶板破断期间释放的弹性能量值,并利用FLAC3D数值模拟划分工作面回采期间的高应力区域,同时根据分形理论分析微震事件的时间分布、空间分布与冲击地压的内部关联。研究结果表明:坚硬顶板断裂前,悬露顶板由于旋转下沉不断对工作面前方煤体缓慢加载,由于过程缓慢,应力与能量不断向煤岩体深部转移,不易发生冲击地压。当顶板断裂时,会瞬间释放大量的弯曲应变能,对工作面周围煤体产生强大的脉冲作用,若脉冲能量超过冲击地压的临界值,则发生冲击地压的可能性较大。且冲击地压发生之前,煤岩体处于非稳定状态,会与外界积极交换能量,此时微震事件处于活跃期,当微震能量超过一定数值或微震事件的分维值低于某临界值时,易发生冲击地压。      

石门揭煤突出模拟实验台的设计与应用

基于石门揭煤过程中采掘应力场与瓦斯突出关系研究的需要,针对目前石门揭煤突出模型还处在实验室研究的阶段,而大部分都未能综合考虑瓦斯压力、地应力、煤的物理力学性质等对突出的影响,研制出一套能够综合考虑地应力、瓦斯压力及煤体结构的石门揭煤突出模拟试验系统。为取得准确、客观的试验效果,进行了密封、快速开启装置及氮气平衡系统等关键技术的设计,介绍了试验系统的主要组成结构、功能。利用该实验台进行石门揭煤突出试验,试验结果反映出在突出过程中地应力和瓦斯压力的变化情况,可为研究和揭示煤与瓦斯突出机制、突出过程中地应力和瓦斯压力的变化规律提供新的技术手段。     

深部层状节理岩体分区破裂模型试验研究

随着地下工程开挖深度的增加,深部洞室围岩将产生不同于浅部洞室的分区破裂现象。为深入研究深部岩体分区破裂现象的形成机制和影响因素,以淮南矿区丁集煤矿的深部巷道为工程背景,利用模型相似材料和高地应力真三维加载模型试验系统,首次开展了带有软弱夹层的层状节理岩体的真三维地质力学模型试验。结果表明：（1）在满足一定应力条件下,带有软弱夹层的层状节理试验模型出现明显的分区破裂现象;（2）软弱夹层是影响层状节理岩体分区破裂现象的重要因素,在相同的应力条件下,软弱夹层使得巷道围岩的径向位移和应变明显增加;并且软弱夹层的间距越小,洞周破裂区的层数越多,范围越大;（3）洞周破裂区的形状近似为圆形,与是否存在软弱夹层及软弱夹层间距均无关。模型试验结果有效揭示了分区破裂的影响因素,为深入研究高地应力深部岩体的非线性变形破坏特征奠定了坚实的试验基础。     

潞安矿区井下地应力测量及分布规律研究

在山西潞安矿区的13个煤矿采用小孔径水压致裂地应力测量装置,完成了60个测点的原岩应力测量工作。实测数据表明：潞安矿区55%的测点最大水平主应力大于垂直主应力,由于受埋藏深度与地质构造影响,矿区内各矿地应力值差别较大,但地应力大小总体上属于中等地应力值;潞安矿区最大水平主应力方向从南到北变化较大,构造应力场呈现出多变的形态。在实测数据的基础上,绘制了潞安矿区地应力分布图;分析了地应力随埋藏深度的变化规律、平均水平主应力与垂直主应力的比值与埋藏深度的关系。煤矿井下地应力测量为井田开拓、巷道布置与支护设计等工程实践提供了可靠的基础参数,提高了工程设计的科学性、合理性与可靠性。