潮汐和潮流作用下1323号台风“菲特”台风浪数值模拟

利用第三代近岸海浪模式SWAN(Simulating WAves Nearshore)建立了基于非结构网格的台湾海峡台风浪数值模型,并以WRF模式(Weather Research and Forecasting Model)计算得到的高分辨率台风风场作为驱动,模拟了1323号台风"菲特"影响期间台湾海峡波浪场的演变过程。以实测资料进行验证的结果表明:整个模拟过程风速的平均绝对误差为1.60 m/s,有效波高的平均绝对误差为0.42 m,计算结果较好地再现了"菲特"台风影响下海峡内波浪运动过程。通过对比数值实验分析了潮汐、潮流对台湾海峡台风浪的影响,分析表明:海峡内近岸浅水区域潮汐和潮流对波浪计算的影响显著,在考虑水位和流场后,计算得到的有效波高分布曲线呈现周期性振荡,且与潮汐周期变化一致,计算得到的有效波高绝对误差下降14%,近岸波浪数值模拟的精度得到了改善。     

海流海浪耦合作用对台风浪影响的数值研究

漂浮式海上风电工程设计对波浪参数等必要环境参数提出了更高的要求。本文针对福建南日漂浮式海上风电场海域建立了高分辨率的海浪-海流耦合数值模型,研究海上风电场区水位和海流对海浪的影响。模拟结果显示,耦合模式所得有效波高更加准确,可以体现水位和流速变化对波高的影响。通过分析台风过程中的浪流耦合作用对海浪模拟结果的影响发现,浪流耦合作用对最大有效波高的影响空间分布差异明显,1307号、1319号、0908号和1617号四次台风过程中,耦合作用对工程区域最大有效波高的影响可达-1.0～1.0 m。对单点的模拟结果分析发现,流向和浪向同向时对浪高有削弱作用,反向时对浪高有增强作用。此外,浪流耦合作用对波向和谱峰周期也有明显的影响,在1319号台风过程中,波向变化可达20°,谱峰周期变化可达2 s。本文论证了采用海浪-海流耦合模式在重现海浪极值中的重要性,对海上工程设计具有参考价值。     

水动力时空变化对近岸风浪演化的影响——以渤海湾西南岸为例

采用SWAN模型和ADCIRC模型建立了风浪、潮汐和水流联合作用的耦合数值模式,并通过渤海湾西南岸实测资料对该模式进行了验证。利用该模式分析了近岸区水位和流场时空变化对风浪模拟结果的影响,计算结果表明水位变化对近岸区风浪模拟结果有显著影响,特别是中等大风过程高潮位时波高受水位影响的变化幅值可达0.5m以上,且水深越浅影响越大。但在岸滩平缓的近岸海域由于流速、流向的时空变化不太剧烈,流场作用和波浪辐射应力作用对波浪场的影响都基本可以忽略。在模拟近岸风浪过程时,应选用耦合模式。     

山东半岛北部海洋动力环境的高频地波雷达观测

利用两台高频地波雷达(ground wave radar,WERA)站对山东半岛北部雷达覆盖海区的浪、流场进行了观测,并且利用海洋-大气-波浪耦合沉积输运模型(coupled-ocean-atmosphere-wave-sediment transport modeling system,COAWST)对该区域的一个强风暴过程进行了数值模拟,对雷达观测数据、现场声学多普勒流速剖面仪(acoustic Doppler current profilers,ADCP)调查数据和数值模拟结果进行比对分析发现,模型模拟的水位变化与ADCP测量结果一致,WERA所观测到的有效波高和ADCP结果比较吻合,模型模拟的ADCP站位的流速相位、大小与雷达观测结果比较接近,与ADCP的结果有一定偏差。雷达观测的海区流场结果与模型反映趋势基本一致,但是在近岸方向上变化较大,其原因可能与ADCP的投放位置、模型的分辨率设置等因素有关。高频地波雷达系统是海岸带动力环境观测的一个有效工具,在实际应用中有着广泛的前景。     

近岸浪-风暴潮耦合模型在天津沿海的应用

为了精细化描述天津沿海台风天气下近岸浪和风暴潮特征,基于非结构三角网格,建立近岸浪与风暴潮的耦合模型,其中台风风场采用藤田台风模型,近岸浪采用SWAN波浪模型,风暴潮采用ADCIRC模型。通过对几次典型台风暴潮数值模拟的验证,耦合模型对风速、有效波高和增水的计算结果与实际观测资料符合性均较好,能够很好地反映台风过程中天津沿海近岸浪和风暴潮特征,可以为天津的防灾减灾工作提供科学依据。     

东中国海浪流相互作用对水位和波高影响的数值研究

通过修改风应力和底摩擦应力的计算方式并引入波致辐射应力,以POM(Princeton Ocean Model)和SWAN(Simulating Waves Nearshore)模式为基础构建了浪流相互作用耦合模式,对1994年14号台风过程下的东中国海波流相互作用对水位和波高的影响进行了模拟研究.结果表明:浪流相互作用引起的水位变化主要出现在近岸浅水区.与岸边站点实测水位的对比显示,耦合后的结果相比非耦合结果更接近观测值,特别是在极值水位处.流的存在显著地影响有效波高的计算结果.在黄海海域,流对有效渡高的增减在极值处大于0.2 m.在台湾岛东北海域黑潮流系附近,流对有效波高的增加最大可达1.6 m.上述结果对改善近岸风暴潮和海浪预报具有指导意义.     

浪流耦合数值模式在苏北辐射沙洲海域的应用研究

采用三角形网格海洋模式ADCIRC-2DDI和海浪模式SWAN双向耦合模式,建立了苏北辐射沙洲海域高精度水动力模型,用以研究该海域天文潮-风暴潮-海浪相互作用。以2012年15号台风"布拉万"为例,分别采用WRF气象模型后报风场和台风模型风场进行台风期间水位和波浪场的数值模拟,与实测资料的对比结果显示模型较准确地模拟出了"布拉万"台风期间的风暴增水与海浪过程,但模拟的极值增水和二次增水时间较实测资料提前了3 h左右。对"布拉万"台风期间模拟结果的分析表明:在浅滩及浅滩前沿水域,水位和海流对海浪模拟结果具有显著影响,是否耦合计算的有效波高差异可达1 m以上;波浪对水位的影响具有空间差异,在水深大于15 m的区域,波浪引起的水位变化小于5 cm,在浅滩区域,波浪引起的水位变化在4～10 cm,是否考虑波浪耦合对漫滩区域的模拟结果影响较大,进行浅滩及浅滩前沿的水动力计算,有必要考虑浪流耦合过程。     

西北太平洋浪流相互作用对有效波高的影响研究

西北太平洋强流区会对海浪的特征和分布产生显著的影响,尤其是研究台风过程中海流与海浪的相互作用具有重要的研究意义。本文以ROMS海洋模式和SWAN海浪模式为基础,构建了浪流耦合模式系统,对2013年10月6-17日间的台风“丹娜丝”、“百合”、“韦帕”过程中西北太平洋浪流相互作用中海流对有效波高的影响进行了研究。通过对比模式模拟有效波高与浮标观测资料,发现耦合后的有效波高比非耦合结果更接近观测值,耦合模式中海流的存在对有效波高的分布有明显的影响。研究表明,特别是在有效波高峰值处,海流引起的有效波高增大最大可达1 m。海浪浪向及流向的空间分布以及中国近海浮标处浪向与流向的时间序列表明,流向与浪向反向时,海流的影响造成有效波高增大;二者同向时,有效波高减小。海流对有效波高的调整会沿着海浪传播的方向传播相当一段距离。在西北太平洋的海浪场计算中,引入海流的耦合模式计算结果对改善强流区海浪预报具有重要意义,并且海流的模拟精度对于高精度的海浪预报非常重要。     

黄海海浪季节变化的数值模拟研究

利用第三代海浪数值模式SWAN,研究了黄海海浪有效波高的季节变化特征及相关的物理过程。结果表明,在黄海的大部分区域,混合浪有效波高的最大值出现在冬季,而最小值则基本出现在夏季。北黄海北部和山东半岛南岸的近海海域呈现稍微不同的季节变化,有效波高的最大值出现在春季。全年4个季节中混合浪有效波高的空间分布基本一致:均在济州岛西南最大,沿黄海中部区域向北和由中部区域向近岸区域逐渐减小。黄海海浪为风浪占主,涌浪有效波高远小于风浪有效波高。在黄海的大部分区域,白冠耗散和四波非线性相互作用对黄海海浪的季节变化均至关重要;对于外海区域,四波非线性相互作用更为重要,而对于近海区域,白冠耗散则影响更大。本研究旨在研究黄海海浪的季节变化特征及其物理过程,为进一步探讨该海域海浪在其他时间尺度上的变异特征和动力学过程提供研究基础。     

江苏海域波浪数值模拟研究

本文以风场为驱动运用第三代波浪模型SWAN对江苏海域的波候进行了模拟研究。在模拟过程中采用了嵌套结构,并考虑了潮位对波浪的影响,提高了近岸波浪模拟的精度。同时,对江苏海域波浪分布特征进行了研究。研究结果表明:江苏海域深水区域年平均有效波高分布趋势由南往北逐渐递减,而近岸10m水深处波高从大丰港开始由南往北呈先增加后减小的趋势。江苏海域年平均有效波高最大值为1.5m,最大年平均周期为4.6s,常浪向为NE或SE方向,四季中冬季浪最大,强浪向为NE—NNE方向。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.     

INFORMATION FOR AUTHORS

<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,     

Evaluation of the Risk of Marine Slope Instability: A Pseudo-3D Approach for Application to Large Areas

This article presents a methodology developed to evaluate the instability of submarine slopes that extend over a large area. Special attention was paid to (1) the complex geometry (bathymetry) and the expanse of the slope, (2) the heterogeneity of the sediment, and (3) the distribution of the pore pressure. The safety factor was considered as a spatially varying quantity. The General Formulation (GLE, Fredlund and Krahn 1977), which fully satisfies equilibrium conditions, was used for evaluating the stability of the marine slope. The submarine slope failure, which occurred on 16 October 1979 during the construction of the new Nice airport, was studied in order to test the developed model. Geotechnical parameters were taken from experimental tests carried out by IFREMER on 19 cores extracted at different depths (from 27 m to 1300 m) (Cochonat, Bourillet, and Savoye, 1993; Mulder et al., 1994). Many scenarios were proposed in order to explain the cause of the Nice slope failure (Habib, 1994). In this article, two of those scenarios were tested. Simulation results are presented and discussed.