Evolution of an englacial volcano: Brown Bluff,Antarctica

Marine shallow-water to emergent volcanoes have been described in detail, but comparable englacial centres are not well documented. Brown Bluff is a Pleistocene, shallow water, alkali basaltic volcano whose deposits were ponded within an englacial lake, enclosed by ice >400 m thick. Its evolution is divided chronologically into pillow volcano, hyalotuff cone, slope failure and hyaloclastite delta/subaerial stages. Seventeen lithofacies and five structural units (A-E) are recognised and described. The pillow volcano stage (Unit A) is similar to those of many submarine seamount volcanoes. It comprises extrusive and intrusive pillow lavas draped by slumped hyaloclastite. Units B and D define the hyalotuff cone stage, which was centred on a summit vent(s), and comprises slumped, poorly sorted hyalotuffs redeposited downslope by sediment gravity flows and ponded against an ice barrier. This stage also includes water-cooled subaerial lavas and massive hyalotuffs ponded within a crater. Cone construction was interrupted by drainage of the lake and slope failure of the northeast flank, represented by debris avalanche-type deposits (Unit C). Unit E represents the youngest stage and consists of a Gilbert-type hyaloclastite delta(s), which prograded away from a summit vent(s), and compound subaerial lavas. A second drainage episode allowed subaerial lavas to accumulate in the surrounding trough.     

The emplacement of an obsidian dyke through thin ice: Hrafntinnuhryggur, Krafla Iceland

An eruption along a 2.5 km-long rhyolitic dyke at Krafla volcano, northern Iceland during the last glacial period formed a ridge of obsidian (Hrafntinnuhryggur). The ridge rises up to 80 m above the surrounding land and is composed of a number of small-volume lava bodies with minor fragmental material. The total volume is < 0.05 km³. The lava bodies are flow- or dome-like in morphology and many display columnar-jointed sides typical of magma–ice interaction, quench-fragmented lower margins indicative of interaction with meltwater and pumiceous upper surfaces typical of subaerial obsidian flows. The fragmental material compromises poorly-sorted perlitic quench hyaloclastites and poorly-exposed pumiceous tuffs. Lava bodies on the western ridge flanks are columnar jointed and extensively hydrothermally altered. At the southern end of the ridge the feeder dyke is exposed at an elevation  95 m beneath the ridge crest and flares upwards into a lava body.Using the distribution of lithofacies, we interpret that the eruption melted through ice only 35–55 m thick, which is likely to have been dominated by firn. Hrafntinnuhryggur is therefore the first documented example of a rhyolitic fissure eruption beneath thin ice/firn. The eruption breached the ice, leading to subaerial but ice/firn-contact lava effusion, and only minor explosive activity occurred. The ridge appears to have been well-drained during the eruption, aided by the high permeability of the thin ice/firn, which appears not to have greatly affected the eruption mechanisms. We estimate that the eruption lasted between 2 and 20 months and would not have generated a significant jökulhlaup (< 70 m³ s^− 1).     

Degassing and differentiation in subglacial volcanoes, Iceland

Within the neovolcanic zones of Iceland many volcanoes grew upward through icecaps that have subsequently melted. These steep-walled and flat-topped basaltic subglacial volcanoes, called tuyas, are composed of a lower sequence of subaqueously erupted, pillowed lavas overlain by breccias and hyaloclastites produced by phreatomagmatic explosions in shallow water, capped by a subaerially erupted lava plateau. Glass and whole-rock analyses of samples collected from six tuyas indicate systematic variations in major elements showing that the individual volcanoes are monogenetic, and that commonly the tholeiitic magmas differentiated and became more evolved through the course of the eruption that built the tuya. At Herdubreid, the most extensively studies tuya, the upward change in composition indicates that more than 50 wt.% of the first erupted lavas need crystallize over a range of 60°C to produce the last erupted lavas. The S content of glass commonly decreases upward in the tuyas from an average of about 0.08 wt.% at the base to < 0.02 wt.% in the subaerially erupted lava at the top, and is a measure of the depth of water (or ice) above the eruptive vent. The extensive subsurface crystallization that generates the more evolved, lower-temperature melts during the growth of the tuyas, apparently results from cooling and degassing of magma contained in shallow magma chambers and feeders beneath the volcanoes. Cooling may result from percolation of meltwater down cracks, vaporization, and cycling in a hydrothermal circulation. Degassing occurs when progressively lower pressure eruption (as the volcanic vent grows above the ice/water surface) lowers the volatile vapour pressure of subsurface melt, thus elevating the temperature of the liquidus and hastening liquid-crystal differentiation.     

Englacial vs lacustrine origin of volcanic table mountains: evidence from iceland

Detailed facies analysis of hyaloclastites and associated lavas from eight table mountains and similar "hyaloclastite volcanoes" in the Icelandic rift zone contradict a rapid and continuous, "monogenetic", entirely subglacial evolution of most volcanoes studied. The majority of the exposed hyaloclastite deposits formed in large, stable lakes as indicated by widespread, up to 300-m-thick, continuous sections of deep water, shallow water and emergent facies. Salient features include extensively layered or bedded successions comprising mainly debris flow deposits, turbidites, base surge and fallout deposits consisting of texturally and compositionally variable, slightly altered hyaloclastites, as well as sheet and pillow lavas. In contrast, chaotic assemblages of coarser-grained, more poorly sorted and more strongly palagonitized hyaloclastite tuffs and breccias, as well as scoria and lava are interpreted to have formed under sub- or englacial conditions in small, chimney-like ice cavities or ice-bound lakes. Irregularly shaped and erratically arranged hyaloclastite bodies produced at variable water levels appear to have resulted mainly from rapid changes of the eruptive environment due to repeated build-up and drainage of ice-bound lakes as well as the restricted space between the ice walls. We distinguish a "deep water" facies formed during high water levels of the lake, a hydroclastic shallow water and emergent facies (leakage of the lake or growth of the volcano above the water surface). Our model implies the temporary existence of large, stable lakes in Iceland probably formed by climatically induced ice melting. The highly complex edifices of many table mountains and similar volcanoes were constructed during several eruptive periods in changing environments characterized by contrasting volcanic and sedimentary processes. Received: 10 June 1997 / Accepted: 28 July 1998     

Products of an effusive subglacial rhyolite eruption: Bláhnúkur, Torfajökull, Iceland

We present field observations from Bláhnúkur, a small volume (<0.1 km³) subglacial rhyolite edifice at the Torfajökull central volcano, south-central Iceland. Bláhnúkur was probably emplaced during the last glacial period (ca. 115–11 ka). The characteristics of the deposits suggest that they were formed by an effusive eruption in an exclusively subglacial environment, beneath a glacier >400 m thick. Lithofacies associations attest to complex patterns of volcano-ice interaction. Erosive channels at the base of the subglacial sequence are filled by both eruption-derived material and subglacial till, which show evidence for deposition by flowing meltwater. This suggests that meltwater was able to drain away from the vent area during the eruption. Much of the subglacial volcanic deposits consist of conical-to-irregularly shaped lava lobes typically 5–10 m long, set in poorly sorted breccias with an ash-grade matrix. A gradational lavabreccia contact at the base of lava lobes represents a fossilised fragmentation interface, driven by magma-water interaction as the lava flowed over poorly consolidated, waterlogged debris. Sets of columnar joints on the upper surfaces of lobes are interpreted as ice-contact features. The morphology of the lobes suggests that they chilled within conically shaped subglacial cavities 2–5 m high. Avalanche deposits mantling the flanks of Bláhnúkur appear to have been generated by the collapse of lava lobes and surrounding breccia. A variety of deposit characteristics suggests that this occurred both prior to and after quenching of the lava lobes. Collapse events may have occurred when the supporting ice walls were melted back from around the cooling lava lobes and breccias. Much larger lava flows were emplaced in the latter stages of the eruption. Columnar joint patterns suggest that these flowed and chilled within subglacial cavities 20 m high and 100–200 m in length. There is little evidence for magma-water interaction at lava flow margins which suggests that these larger cavities were drained of meltwater. As rhyolite magma rose to the base of the glacier, the nature of the subglacial cavity system played an important role in governing the style of eruption and the volcanic facies generated. We present evidence that the cavity system evolved during the eruption, reflecting variations in both melting rate and edifice growth that are best explained by a fluctuating eruption rate.     

The 1719–1721 eruptions of potassium-rich lavas at Wudalianchi, China

Eruptions between 1719 and 1721 at Wudalianchi produced two monogenetic strombolian cones Laoheishan and Huoshaoshan and the 65 km² Shilong lava field. The lavas are unusual in that they are leucite-bearing and lack modal plagioclase. Together with the earlier cones, the historic cones form an orthogonal network with a 4-km average separation. Differences in the morphology of the historic cones are attributed to differences in explosivity. The Shilong lava is predominantly pahoehoe (70%), of compound form, and similar to “plains-style” lavas. It is concluded that there is little possibility that an eruption will take place at Wudalianchi in the near future.     

Recent hydrothermal explosion craters in an old hyaloclastite flow, central Iceland

Hundreds of small (diameter 2–50 m) hydrothermal explosion craters are dispersed across the top plateau of a hyaloclastite ridge in central Iceland. The craters are undisturbed by erosion and must be of Recent age. The ridge, Dyngjufjöll Ytri, is a tectonic horst, separated from the Dyngjufjöll volcanic center and the Askja caldera by a narrow graben. The ridge is 20 km by 6 km with a flat top partly covered with glacial sediments and air-fall tephra. It is composed of two major volcanic units, a lower hyaloclastite flow and an upper complex series containing pillow lavas, air-fall and surge tephra deposits and water lain sediments. Large (max. 9 m diameter) cylindrical gas pipes, coated with calcite, are locally exposed in the hyaloclastite flow. Evidence suggests that volcanism contributing to the formation of the ridge was long extinct when its surface was broken by the hydrothermal explosions. The elevated position of the ridge and its narrow form make unlikely the existence of a long-lived hydrothermal system. This is also borne out by the absence of intense thermal alteration of the material blown out in the explosions. The ridge is surrounded by postglacial lavas. One of these lavas issued from a fissure with the same strike as the ridge that terminates in a small crater at the base of its southern slope. It is suggested that the fissure continues as an intrusion into the basal hyaloclastite flow where water in gas pipes of the hyaloclastite was converted into high-pressure steam that exploded through the overlying unconsolidated formations.     

Late Miocene volcanic sequences in northern Victoria Land,Antarctica: products of glaciovolcanic eruptions under different thermal regimes

Late Miocene (c. 13–5 Ma) volcanic sequences of the Hallett Volcanic Province (HVP) crop out along >250 km of western Ross Sea coast in northern Victoria Land. Eight primary volcanic and six sedimentary lithofacies have been identified, and they are organised into at least five different sequence architectures as a consequence of different combinations of eruptive and/or depositional conditions. The volcanoes were erupted in association with a Miocene glacial cover and the sequences are overwhelmingly glaciovolcanic. The commonest and most representative are products of mafic aa lava-fed deltas, a type of glaciovolcanic sequence that has not been described before. It is distinguished by (1) a subaerially emplaced relatively thin caprock of aa lavas lying on and passing down-dip into (2) a thicker association of chaotic to crudely bedded hyaloclastite breccias, water-chilled lava sheets and irregular lava masses, collectively called lobe-hyaloclastite. A second distinctive sequence type present is characterised by water-cooled lavas and associated sedimentary lithofacies (diamictite (probably glacigenic) and fluvial sands and gravels) similar to some mafic glaciovolcanic sheet-like sequences (see Smellie, Earth-Science Reviews, 74, 241–268, 2008), but including (for the first time) examples of likely sheet-like sequences with felsic compositions. Other sequence types in the HVP are minor and include tuff cones, cinder cones and a single ice-marginal lacustrine sequence. The glacial thermal regime varied from polar, characterised by sequences lacking glacial erosion, glacigenic sediments or evidence for free water, to temperate or sub-polar for sequences in which all of these features are conspicuously developed.     

Late Miocene valley-confined subglacial volcanism in northern Alexander Island,Antarctic Peninsula

Isolated, Late Miocene volcanogenic sequences in northern Alexander Island, Antarctic Peninsula, form an unusual, cogenetic association of volcaniclastic, sandy-gravelly lithofacies (including tillites) and volcanic (lava/hyalocalstite) lithofacies. Using simple lithofacies analysis and theoretical considerations of hydrodynamic effects of subglacial eruptions, valley-confined volcanic activity beneth thin, wet-based ice is suggested. The Alexander Island successions are complete enough to be regarded as model sequences for this uncommonly recorded type of eruptive/depositional activity. The sedimentary lithofacies represent resedimented tuffs and meltout or flow tills, which were probably deposited in subglacial ice tunnels eroded or enlarged by volcanically heated meltwater. The volcanic lithofacies formed by the interaction of hot magma with the ice tunnel walls (generating abundant meltwater) and water-saturatedsediments, resulting in the formation of heterogeneous masses of lava and hyaloclastite. There is no obvious sequence organisation in the sedimentary sections. This is probably due to a complex interplay of eruption-related and environmental hydrodynamic factors affecting the relative proportions of water and entrained sediment.     

Progressive cooling of the hyaloclastite ridge at Gjálp, Iceland, 1996–2005

In the subglacial eruption at Gjálp in October 1996 a 6 km long and 500 m high subglacial hyaloclastite ridge was formed while large volumes of ice were melted by extremely fast heat transfer from magma to ice. Repeated surveying of ice surface geometry, measurement of inflow of ice, and a full Stokes 2-D ice flow model have been combined to estimate the heat output from Gjálp for the period 1996–2005. The very high heat output of order 10⁶ MW during the eruption was followed by rapid decline, dropping to  2500 MW by mid 1997. It remained similar until mid 1999 but declined to 700 MW in 1999–2001. Since 2001 heat output has been insignificant, probably of order 10 MW. The total heat carried with the 1.2 × 10¹² kg of basaltic andesite erupted (0.45 km³ DRE) is estimated to have been 1.5 × 10¹⁸ J. About two thirds of the thermal energy released from the 0.7 km³ edifice in Gjálp occurred during the 13-day long eruption, 20% was released from end of eruption until mid 1997, a further 10% in 1997–2001, and from mid 2001 to present, only a small fraction remained. The post-eruption heat output history can be reconciled with the gradual release of 5 × 10¹⁷ J thermal energy remaining in the Gjálp ridge after the eruption, assuming single phase liquid convection in the cooling edifice. The average temperature of the edifice is found to have been approximately 240 °C at the end of the eruption, dropping to  110 °C after 9 months and reaching  40 °C in 2001. Although an initial period of several months of very high permeability is possible, the most probable value of the permeability from 1997 onwards is of order 10^− 12 m². This is consistent with consolidated/palagonitized hyaloclastite but incompatible with unconsolidated tephra. This may indicate that palagonitization had advanced sufficiently in the first 1–2 years to form a consolidated hyaloclastite ridge, resistant to erosion. No ice flow traversing the Gjálp ridge has been observed, suggesting that it has effectively been shielded from glacial erosion in its first 10 years of existence.     

Pleistocene mass-flow deposits of basaltic hyaloclastite on a shallow submarine shelf,South Iceland

A Pleistocene subaqueous, volcanic sequence in South Iceland consists of flows of basaltic hyaloclastite and lava with interbedded sedimentary diamictite units. Emplacement occurred on a distal submarine shelf in drowned valleys along the southern coast of Iceland. The higher sea level was caused by eustatic sea-level change, probably towards the end of a glaciation. This sequence, nearly 700 m thick, rests unconformably on eroded flatlying lavas and sedimentary rocks of likely Tertiary age. A Standard Depositional Unit, describing the flows of hyaloclastite, starts with compact columnar-jointed basalt overlain by cubejointed basalt, and/or pillow lava. This in turn is overlain by thick unstructured hyaloclastite containing aligned basalt lobes, and bedded hyaloclastite at the top. A similar lithofacies succession is valid for proximal to distal locations. The flows were produced by repeated voluminous extrusions of basaltic lava from subaquatic fissures on the Eastern Rift Zone of Iceland. The fissures are assumed to lie in the same general area as the 1783 Laki fissure which produced 12 km³ of basaltic lava. Due to very high extrusion rates, the effective water/melt ratio was low, preventing optimal fragmentation of the melt. The result was a heterogeneous mass of hyaloclastite and fluid melt which moved en masse downslope with the melt at the bottom of the flow and increasingly vesicular hyaloclastite fragments above. The upper and distal parts of the flow moved as low-concentration turbulent suspensions that deposited bedded hyaloclastite.     

Petrogenesis of an 800 m lava sequence in eastern Uruguay: insights into magma chamber processes beneath the Paraná flood basalt province

Major and trace element along with representative Sr, Nd and Pb isotope data are presented for drill core samples which intersect an 800 m lava pile in eastern Uruguay. The lavas form part of the Paraná flood basalt province, are low-Ti in composition but distinct from the low-Ti Gramado magma type, and have been termed the Treinte Y Trés magma type. The lava pile overlies a large positive gravity anomaly inferred to reflect an east–west trending, mid-crustal mafic intrusive body with a calculated volume of 35,000 km³. Smooth up-section compositional variations in the basalts are interpreted to record magma evolution within this mid-crustal magma chamber. ⁸⁷Sr/⁸⁶Sr and ²⁰⁶Pb/²⁰⁴Pb increase throughout the sequence yet Mg remains relatively constant in the lower 200 m of the sequence, suggesting a role for magma chamber recharge. Above this the lavas show a regular, up-section decrease in Mg coupled with increasing ⁸⁷Sr/⁸⁶Sr and ²⁰⁶Pb/²⁰⁴Pb and this is interpreted to reflect crystal fractionation combined with crustal contamination. The data provide further evidence that contamination of flood basalt magmas in crustal magma chambers is a common phenomenon and calculations suggest that the amount of crustal addition may be as high as 60–70%. Nevertheless, the effects of this crustal contamination do not appear able to account for the discrepancy between key incompatible trace element ratios and isotope ratios of the lavas and those of any putative mantle plume. In fact, La/Ta decreases with decreasing Mg and increasing ⁸⁷Sr/⁸⁶Sr indicating that the effects of crustal contamination were actually to reduce La/Ta and implying that the parental magmas had very high La/Ta (90). These constraints are clearly inconsistent with an asthenospheric origin for the parental magmas and so, consistent with mass balance calculations, it is inferred that they were derived from the lithospheric mantle.     

Silicic lava dome growth in the 1934–1935 Showa Iwo-jima eruption, Kikai caldera, south of Kyushu, Japan

The 1934–1935 Showa Iwo-jima eruption started with a silicic lava extrusion onto the floor of the submarine Kikai caldera and ceased with the emergence of a lava dome. The central part of the emergent dome consists of lower microcrystalline rhyolite, grading upward into finely vesicular lava, overlain by coarsely vesicular lava with pumice breccia at the top. The lava surface is folded, and folds become tighter toward the marginal part of the dome. The dome margin is characterized by two zones: a fracture zone and a breccia zone. The fracture zone is composed of alternating layers of massive lava and welded oxidized breccia. The breccia zone is the outermost part of the dome, and consists of glassy breccia interpreted to be hyaloclastite. The lava dome contains lava with two slightly different chemical compositions; the marginal part being more dacitic and the central part more rhyolitic. The fold geometry and chemical compositions indicate that the marginal dacite had a slightly higher temperature, lower viscosity, and lower yield stress than the central rhyolite. The high-temperature dacite lava began to effuse in the earlier stage from the central crater. The front of the dome came in contact with seawater and formed hyaloclastite. During the later stage, low-temperature rhyolite lava effused subaerially. As lava was injected into the growing dome, the fracture zone was produced by successive fracturing, ramping, and brecciation of the moving dome front. In the marginal part, hyaloclastite was ramped above the sea surface by progressive increments of the new lava. The central part was folded, forming pumice breccia and wrinkles. Subaerial emplacement of lava was the dominant process during the growth of the Showa Iwo-jima dome.Editorial Responsibility J. McPhie     

Evolution of an englacial volcanic ridge: Pillow Ridge tindar, Mount Edziza volcanic complex, NCVP, British Columbia, Canada

Glaciovolcanic deposits are critical for documenting the presence and thickness of terrestrial ice-sheets, and for testing hypotheses about inferred terrestrial ice volumes based on the marine record. Deposits formed by the coincidence of volcanism and ice at the Mount Edziza volcanic complex (MEVC) in northern British Columbia, Canada, preserve an important record for documenting local and possibly regional ice dynamics. Pillow Ridge, located at the northwestern end of the MEVC, formed by ice-confined, fissure-fed eruptions. It comprises predominantly pillow lavas and volcanic breccias of alkaline basalt composition, with subordinate finer-grained volcaniclastic deposits and dykes. The ridge is presently  4 km long,  1000 m in maximum width, and  600 m high. Fifteen syn- and post-eruptive lithofacies are recognized in excellent exposures along the glacially dissected western side of the ridge. We recognize five lithofacies associations: (1) poorly sorted tuff breccia and dykes, (2) proximal pillow lava, dykes and tuff breccia, (3) distal pillow lava, poorly sorted conglomerate and well-sorted volcanic sandstone, (4) interbedded tuff, lapilli tuff, and tuff breccia units, and (5) heterolithic volcanogenic conglomerate and sandstone. Given the abundance of pillow lavas and the lack of surrounding topographic barriers capable of impounding water, we agree with Souther [Souther, J.G., 1992. The late Cenozoic Mount Edziza volcanic complex. Geol. Soc. Can. Mem., vol. 420. 320 pp] that the bulk of the edifice formed while confined by ice, but have found evidence for a more complex and variable eruption history than that which he proposed. Preliminary estimates of water-ice depths derived from FTIR analyses of H₂O give ranges of 300 to 680 m assuming 0 ppm CO₂, and 857 to 1297 m assuming 25 ppm CO₂. Variations in depth estimates among samples may indicate that water/ice depths changed during the evolution of the ridge, which is consistent with our interpretations for the origins of different lithofacies associations. Given that the age of the units are likely to be ca. 0.9 Ma [Souther, J.G., 1992. The late Cenozoic Mount Edziza volcanic complex. Geol. Soc. Can. Mem., vol. 420. 320 pp], Pillow Ridge may be the best documentation of a regional high stand of the Cordilleran Ice Sheet (CIS) in the middle Pleistocene, and an excellent example of the lithofacies and stratigraphic complexities produced by variations in water levels during a prolonged glaciovolcanic eruption.     

Toothpaste lava: Characteristics and origin of a lava structural type transitional between pahoehoe and aa

Toothpaste lava, an important basalt structural type which illustrates the transition from pahoehoe to aa, is particularly well displayed on the 1960 Kapoho lava of Kilauea Volcano. Its transitional features stem from a viscosity higher than that of pahoehoe and a rate of flow slower than that of aa. Viscosity can be quantified by the limited settling of olivine phenocrysts and rate of flow by field observations related to the low-angle slope on which the lava flowed. Much can be learned about the viscosity, rheologic condition, and flow velocity of lavas long after solidification by analyses of their structural characteristics, and it is possible to make at least a semiquantitative assessment of the numerical values of these parameters.     

Thermodynamics and fluid dynamics of effusive subglacial eruptions

We consider the thermodynamic and fluid dynamic processes that occur during subglacial effusive eruptions. Subglacial eruptions typically generate catastrophic floods (jökulhlaups) due to melting of ice by lava and generation of a large water cavity. We consider the heat transfer from basaltic and rhyolitic lava eruptions to the ice for typical ranges of magma discharge and geometry of subglacial lavas in Iceland. Our analysis shows that the heat flux out of cooling lava is large enough to sustain vigorous natural convection in the surrounding meltwater. In subglacial eruptions the temperature difference driving convection is in the range 10–100??°C. Average temperature of the meltwater must exceed 4??°C and is usually substantially greater. We calculate melting rates of the walls of the ice cavity in the range 1–40?m/day, indicating that large subglacial lakes can form rapidly as observed in the 1918 eruption of Katla and the 1996 eruption of Gjálp fissure in Vatnajökull. The volume changes associated with subglacial eruptions can cause large pressure changes in the developing ice cavity. These pressure changes can be much larger than those associated with variation of bedrock and glacier surface topography. Previous models of water-cavity stability based on hydrostatic and equilibrium conditions may not be applicable to water cavities produced rapidly in volcanic eruptions. Energy released by cooling of basaltic lava at the temperature of 1200??°C results in a volume deficiency due to volume difference between ice and water, provided that heat exchange efficiency is greater than approximately 80%. A negative pressure change inhibits escape of water, allowing large cavities to build up. Rhyolitic eruptions and basaltic eruptions, with less than approximately 80% heat exchange efficiency, cause positive pressure changes promoting continual escape of meltwater. The pressure changes in the water cavity can cause surface deformation of the ice. Laboratory experiments were carried out to investigate the development of a water cavity by melting ice from a finite source area at its base. The results confirm that the water cavity develops by convective heat transfer.     

The 1975 sub-terminal lavas, mount etna: a case history of the formation of a compound lava field

The 1975 sub-terminal activity was characterised by low effusion rates (0.3–0.5 m³ s⁻¹) and the formation of a compound lava field composed of many thousands of flow units. Several boccas were active simultaneously and effusion rates from individual boccas varied from about 10⁻⁴ to 0.25 m³s⁻¹. The morphology of lava flows was determined by effusion rate (E): aa flows with well-developed channels and levees formed when E > 2 × 10⁻³ m³ s⁻¹, small pahoehoe flows formed when 2 × 10⁻³ m³ s⁻¹ >E > 5 > 10⁻⁴ m³ s⁻¹ and pahoehoe toes formed when E < 5 × 10⁻⁴ m³ s⁻¹. There was very little variation with time in the effusion temperature, composition or phenocryst content of the lava.New boccas were commonly formed at the fronts of mature lava flows which had either ceased to flow or were moving slowly. These secondary boccas developed when fluid lava in the interior of mature aa flows either found a weakness in the flow front or was exposed by avalanching of the moving flow front. The resulting release of fluid lava was accompanied by either partial drainage of the mature flow or by the formation of a lava tube in the parent flow. The temperature of the lava forming the new bocca decreased with increasing distance from the source bocca (0.035°C m⁻¹). It is demonstrated from the rate of temperature decrease and from theoretical considerations that many of the Etna lavas still contained a substantial proportion of uncooled material in their interior as they came to rest. The formation of secondary boccas is postulated to be one reason why direct measurements of effusion rates tend, in general, to overestimate the total effusion rates of sub-terminal Etna lava fields.