Development of the sediment and water quality management strategies for the Salt-water River,Taiwan

The Salt-water River watershed is one of the major river watersheds in the Kaohsiung City, Taiwan. Water quality and sediment investigation results show that the river water contained high concentrations of organics and ammonia–nitrogen, and sediments contained high concentrations of heavy metals and organic contaminants. The main pollution sources were municipal and industrial wastewaters. Results from the enrichment factor (EF) and geo-accumulation index (I_geo) analyses imply that the sediments can be characterized as heavily polluted in regard to Cd, Cr, Pb, Zn, and Cu. The water quality analysis simulation program (WASP) model was applied for water quality evaluation and carrying capacity calculation. Modeling results show that the daily pollutant inputs were much higher than the calculated carrying capacity (1050 kg day⁻¹ for biochemical oxygen demand and 420 kg day⁻¹ for ammonia–nitrogen). The proposed watershed management strategies included river water dilution, intercepting sewer system construction and sediment dredging.     

Temporal and spatial variability of radium in the coastal ocean and its impact on computation of nearshore cross-shelf mixing rates

Constraining the exchange of water from the shoreline to the mid-shelf is necessary for the development of accurate and predictive models of nearshore circulation. Ra isotopes, which emanate from sediments and have a variety of half-lives, may be useful in measuring cross-shelf mixing rates. The distributions of Ra isotopes were measured in transects extending perpendicular from the shoreline at Sunset Beach and Huntington Beach, CA. The average inventory at Sunset Beach was four times greater than at Huntington Beach. Building on previous research on Ra inputs and circulation in San Pedro Bay, a two-dimensional model for surface water Ra was developed to identify the importance of onshore flow and cross-shelf mixing near Huntington Beach. For the mean summertime conditions, the eddy diffusivity (K_h) was 1.4±0.4 m² s⁻¹, with 8% of the water from Sunset Beach moving down the coast. The remaining water must be low-Ra water that has moved onshore. At time scales greater than a week, the short-lived Ra inventory at Huntington Beach varied by 50%, which reflects changes in the fractions of water moving down-coast and/or in the longshore advection rate. The shoreline Ra concentration varied on time scales of hours, which may be generated by tidal changes in the Ra input at the shoreline and short-period fluctuations in the mixing rate. The low K_h observed in this study in comparison to higher values measured further offshore is evidence that K_h increases with distance offshore. When scale-dependent mixing beyond 455 m offshore is incorporated into the model, the results are consistent with the observed data for ²²³Ra, ²²⁴Ra, and ²²⁸Ra. Using the model, the ²²⁸Ra input flux to the summertime mixed layer was between 3.4×10⁶ and 4.0×10⁶ atoms s⁻¹ (m shoreline)⁻¹.     

Spectral attenuation of solar radiation in Patagonian fjord and coastal waters and implications for algal photobiology

The spectral attenuation of solar irradiation was measured during summer in two types of coastal waters in southern Chile, a north Patagonian fjord (Seno Reloncaví) and open coast (Valdivia). In order to relate the light availability with the light requirements of upper subtidal seaweeds, the saturating irradiance for photosynthesis (E_k) from P–I curves was measured. In addition the UV risk was assessed. Based on the z_1% of PAR, the lower limit of the euphotic zone in the studied systems averaged 21 m (K_d 0.24 m^?1) in Seno Reloncaví and 18 m (K_d 0.27 m^?1) in the coast of Valdivia. Photosynthesis of the studied seaweeds was saturated at markedly lower irradiances than found in their natural depths at the time of the study. Solar radiation penetrating into these depths at both locations largely supports the light requirements for the photosynthesis of subtidal species: 50–160 μmol m^?2 s^?1 for seaweeds from Seno Reloncaví (7 m tidal range) and 20–115 μmol m^?2 s^?1 for Valdivia assemblages (2 m tidal range). Optimal light conditions to saturate photosynthesis (E_k) were present at 10–16 m water depth. The attenuation of solar irradiation did not vary significantly between the fjord and coastal sites of this study. However, the underwater light climates to which seaweeds are exposed in these sites vary significantly because of the stronger influence of tidal range affecting the fjord system as compared with the open coastal site. The patterns of UV-B penetration in these water bodies suggest that seaweeds living in upper littoral zones such as the intertidal and shallow subtidal (<3 m) may be at risk.     

Spatial and seasonal variability of sediment oxygen consumption and nutrient fluxes at the sediment water interface in a sub-tropical lagoon (New Caledonia)

In order to quantify the spatial and seasonal variations of sediment oxygen consumption and nutrient fluxes, we performed a spatial survey in the south west lagoon of New Caledonia during the two major seasons (dry and wet) based on a network of 11 sampling stations. Stations were selected along two barrier reef to land transects representing most types of sediments encountered in the lagoon. Fluxes were measured using ex-situ sediment incubations and compared to sediment characteristics. Sediment oxygen consumption (SOC) varied between 500 and 2000 μmol m⁻² h⁻¹, depending on season and stations. Nutrient effluxes from sediment were highly variable with highest fluxes measured in muddy sediments near the coast. Inter-sample variability was as high as seasonal differences so that no seasonally driven temperature effect could be observed on benthic nutrient fluxes in our temperature range. Nutrient fluxes, generally directed from the sediment to the water column, varied between −5.0 and 70.0 μmol m⁻² h⁻¹ for ammonia and between −2.5 and +12.5 μmol m⁻² h⁻¹ for PO₄ and NO₂₊₃. SOC and nutrient fluxes were compared to pelagic primary production rates in order to highlight the tight coupling existing between the benthic and pelagic compartments in this shallow tropical lagoon. Under specific occasions of low pelagic productivity, oxygen sediment consumption and related carbon and nutrient fluxes could balance nearly all net primary production in the lagoon. These biogeochemical estimates point to the functional importance of sediment biogeochemistry in the lagoon of New Caledonia.     

Photoproduction of hydrogen peroxide in aqueous solution from model compounds for chromophoric dissolved organic matter (CDOM)

To explore whether quinone moieties are important in chromophoric dissolved organic matter (CDOM) photochemistry in natural waters, hydrogen peroxide (H₂O₂) production and associated optical property changes were measured in aqueous solutions irradiated with a Xenon lamp for CDOM model compounds (dihydroquinone, benzoquinone, anthraquinone, napthoquinone, ubiquinone, humic acid HA, fulvic acid FA). All compounds produced H₂O₂ with concentrations ranging from 15 to 500 μM. Production rates were higher for HA vs. FA (1.32 vs. 0.176 mM h⁻¹); values ranged from 6.99 to 0.137 mM h⁻¹ for quinones. Apparent quantum yields (Θ_app; measure of photochemical production efficiency) were higher for HA vs. FA (0.113 vs. 0.016) and ranged from 0.0018 to 0.083 for quinones. Dihydroquinone, the reduced form of benzoquinone, had a higher production rate and efficiency than its oxidized form. Post-irradiation, quinone compounds had absorption spectra similar to HA and FA and 3D-excitation–emission matrix fluorescence spectra (EEMs) with fluorescent peaks in regions associated with CDOM.     

Latitudinal patterns of export production recorded in surface sediments of the Chilean Patagonian fjords (41–55°S) as a response to water column productivity

The Chilean Patagonian fjords region (41–56°S) is characterized by highly complex geomorphology and hydrographic conditions, and strong seasonal and latitudinal patterns in precipitation, freshwater discharge, glacier coverage, and light regime; all of these directly affect biological production in the water column. In this study, we compiled published and new information on water column properties (primary production, nutrients) and surface sediment characteristics (biogenic opal, organic carbon, molar C/N, bulk sedimentary δ¹³C_org) from the Chilean Patagonian fjords between 41°S and 55°S, describing herein the latitudinal pattern of water column productivity and its imprint in the underlying sediments. Based on information collected at 188 water column and 118 sediment sampling sites, we grouped the Chilean fjords into four main zones: Inner Sea of Chiloé (41° to ～44°S), Northern Patagonia (44° to ～47°S), Central Patagonia (48–51°S), and Southern Patagonia (Magellan Strait region between 52° and 55°S). Primary production in the Chilean Patagonian fjords was the highest in spring–summer, reflecting the seasonal pattern of water column productivity. A clear north–south latitudinal pattern in primary production was observed, with the highest average spring and summer estimates in the Inner Sea of Chiloé (2427 and 5860 mg C m^?2 d^?1) and Northern Patagonia (1667 and 2616 mg C m^?2 d^?1). This pattern was closely related to the higher availability of nutrients, greater solar radiation, and extended photoperiod during the productive season in these two zones. The lowest spring value was found in Caleta Tortel, Central Patagonia (91 mg C m^?2 d^?1), a site heavily influenced by glacier meltwater and river discharge loaded with glacial sediments. Biogenic opal, an important constituent of the Chilean fjord surface sediments (Si_OPAL ～1–13%), reproduced the general north–south pattern of primary production and was directly related to water column silicic acid concentrations. Surface sediments were also rich in organic carbon content and the highest values corresponded to locations far away from glacier influence, sites within fjords, and/or semi-enclosed and protected basins, reflecting both autochthonous (water column productivity) and allochthonous sources (contribution of terrestrial organic matter from fluvial input to the fjords). A gradient was observed from the more oceanic sites to the fjord heads (west–east) in terms of bulk sedimentary δ¹³C_org and C/N ratios; the more depleted (δ¹³C_org ?26‰) and higher C/N (23) values corresponded to areas close to rivers and glaciers. A comparison of the Chilean Patagonian fjords with other fjord systems in the world revealed high variability in primary production for all fjord systems as well as similar surface sediment geochemistry due to the mixing of marine and terrestrial organic carbon.     

Remote sensing based water quality monitoring in Chivero and Manyame lakes of Zimbabwe

Lakes Chivero and Manyame are amongst Zimbabwe’s most polluted inland water bodies. MEdium Resolution Imaging Spectrometry level 1b full resolution imagery for 2011 and 2012 were used to derive chlorophyll-a (chl_a) and phycocyanin (blue-green algae) concentrations using a semi-empirical band ratio model; total suspended matter (TSM) concentrations were derived from the MERIS processor. In-situ measured chl_a was used to validate the remotely sensed values. Results indicate that remote sensing measurements are comparable with in situ measurements. A strong positive correlation (R² = 0.91; MAE = 2.75 mg/m³ (8.5%)) and p < 0.01 (highly significant)) between measured and modeled chl_a concentrations was obtained. Relationships between optically active water constituents were assessed. Measured chl_a correlated well with MERIS modeled phycocyanin (PC) concentration (R² = 0.9458; p < 0.01 (highly significant)) whilst chl_a and TSM gave (R² = 0.7344; p < 0.05 (significant)). Modeled TSM and PC concentrations manifested a good relationship with each other (R² = 9047; p < 0.001 (very highly significant)). We conclude that remote sensing data allow simultaneous retrieval of different water quality parameters as well as providing near real time and space results that can be used by water managers and policy makers to monitor water bodies.     

Cave air ventilation and CO2 outgassing by radon-222 modeling: How fast do caves breathe?

In general, the rate and timing of calcite precipitation is in part affected by variations in cave air CO₂ concentrations. Knowledge of cave ventilation processes is required to quantify the effect variations in CO₂ concentrations have on speleothem deposition rates and thus paleoclimate records. In this study we use radon-222 (²²²Rn) as a proxy of ventilation to estimate CO₂ outgassing from the cave to the atmosphere, which can be used to infer relative speleothem deposition rates. Hollow Ridge Cave, a wild cave preserve in Marianna, Florida, is instrumented inside and out with multiple micro-meteorological sensor stations that record continuous physical and air chemistry time-series data. Our time series datasets indicate diurnal and seasonal variations in cave air ²²²Rn and CO₂ concentrations, punctuated by events that provide clues to ventilation and drip water degassing mechanisms. Average cave air ²²²Rn and CO₂ concentrations vary seasonally between winter (²²²Rn = 50 dpm L^? 1, where 1 dpm L^? 1 = 60 Bq m^? 3; CO₂ = 360 ppmv) and summer (²²²Rn = 1400 dpm L^? 1; CO₂ = 3900 ppmv). Large amplitude diurnal variations are observed during late summer and autumn (²²²Rn = 6 to 581 dpm L^? 1; CO₂ = 360 to 2500 ppmv).We employ a simple first-order ²²²Rn mass balance model to estimate cave air exchange rates with the outside atmosphere. Ventilation occurs via density driven flow and by winds across the entrances which create a ‘venturi’ effect. The most rapid ventilation occurs 25 m inside the cave near the entrance: 45 h^? 1 (1.33 min turnover time). Farther inside (175 m) exchange is slower and maximum ventilation rates are 3 h^? 1 (22 min turnover time). We estimate net CO₂ flux from the epikarst to the cave atmosphere using a CO₂ mass balance model tuned with the ²²²Rn model. Net CO₂ flux from the epikarst is highest in summer (72 mmol m^? 2 day^? 1) and lowest in late autumn and winter (12 mmol m^? 2 day^? 1). Modeled ventilation and net CO₂ fluxes are used to estimate net CO₂ outgassing from the cave to the atmosphere. Average net CO₂ outgassing is positive (net loss from the cave) and is highest in late summer and early autumn (about 4 mol h^? 1) and lowest in winter (about 0.5 mol h^? 1). Modeling of ventilation, net CO₂ flux from the epikarst, and CO₂ outgassing to the atmosphere from cave monitoring time-series can help better constrain paleoclimatic interpretations of speleothem geochemical records.     

Evapotranspiration in the Pampean Region using field measurements and satellite data

Evapotranspiration (LE) is an important factor for monitoring crops, water requirements, and water consumption at local and regional scale. In this paper, we applied the semi-empirical model to estimate the daily latent heat flux (LE_d = Rn_d + A − B(Ts − Ta)). LE_d has been estimated using satellite images (Thematic Mapper sensor) and a local dataset (incoming and outgoing short- and long-wave radiation) measured during three years. We first estimated the daily net Radiation (Rn_d) from a linear equation derived from the instantaneous net Radiation (Rn_d = CRn_i + D). Subsequently, coefficients A and B have been estimated for two different cover vegetations (pasture and soybean). For each vegetation cover, an error analysis combining Rn_d, A, B, and surface and air temperatures has been calculated. Results showed that Rn_d had good performance (nonbias and low RMSE). LE_d errors for pasture and soybean were ±28 W m⁻² and ±40 W m⁻² respectively.     

Vertical distribution of HTO and 125I− transport parameters in Boom Clay in the Essen-1 borehole (Mol,Belgium)

In the frame of the R&D activities performed on the Boom Clay for assessing the suitability of deep clayey formations for radioactive waste disposal, the transferability of the scientific results obtained on the Boom Clay in Mol to the whole Campine Basin is investigated. Boreholes were drilled at different locations (e.g. Mol, Doel, Essen) and cores were sampled over the entire thickness of the Boom Clay formation on which the migration parameters for iodide and tritiated water (HTO) are determined.At Essen, the transport parameters in the Boom Clay can be considered as homogeneous in the range from 159 m to 241 m Below Drilling Table. The average hydraulic conductivity is (5.4 ± 1.7) × 10⁻¹² m/s. The average ηR value for iodide is 0.25 ± 0.03 and 0.42 ± 0.05 for HTO. For HTO, this high value is mainly due to a higher value in the Putte Member (0.46 ± 0.03) compared to the other members (0.39 ± 0.02). The apparent diffusion coefficient is (1.3 ± 0.1) × 10⁻¹⁰ m²/s for HTO and (1.1 ± 0.2) × 10⁻¹⁰ m²/s for iodide. The expected effect of ionic strength (increasing with depth) on the ηR value of iodide is of the same size as the measurement error, what might explain why it was not observed.On a lateral (horizontal) level, the hydraulic conductivity at the Essen-1 borehole (5.4 × 10⁻¹² m/s) lies between that of Boom Clay in Mol-1 (2.5 × 10⁻¹² m/s) and that of Boom Clay in Doel-2b (1.4 × 10⁻¹¹ m/s). For iodide, the higher ηR value in Essen-1 and Doel-2b (ηR ≈ 0.25) than in Mol-1 (ηR ≈ 0.16) can partly be explained by a higher ionic strength of the pore water. Apart from the Putte Member at Essen-1, the HTO porosities of the Terhagen Member and the Transition zone in Essen are in the range of the average porosities observed in Mol and Doel (ηR ≈ 0.37–0.39). For both iodide and HTO, the value of the apparent diffusion coefficient D_app is similar in Mol-1 and in Doel-2b, with a clearly higher value for HTO than for iodide. In Essen-1, the apparent diffusion coefficients for iodide and HTO are nearly equal, and slightly smaller than the iodide value in Mol-1/Doel-2b. Accordingly, the HTO apparent diffusion coefficient is considerably smaller in Essen-1 than in Mol-1/Doel-2b.     

Optical signatures of dissolved organic matter in the watershed of a globally large river (Yangtze River,China)

Parallel factor analysis of fluorescence excitation emission matrices of surface water samples of a globally large river (Yangtze River, China) watershed identified three classes of fluorescent dissolved organic matter (FDOM) that had ex/em = 280/330 nm, 305/385 nm and 350/450 nm respectively, resembling “peak T”, “peak M” and “peak C” commonly identified in natural water, respectively. Peak T (a tyrosine/tryptophan-like FDOM) did not show correlations to peak M or C which were humic-like substances, while a positive correlation (r = 0.935, p < 0.001) was present between the natural log-transformed maximum fluorescence intensity (F_max) of peaks T and M indicating a tight link during their production and processing. F_max values (in Raman unit nm^?1) normalized to dissolved organic carbon (DOC) concentration were low, varying in ranges 15.93–85.95, 29.83–83.54 and 19.73–51.05 × 10^?5 nm^?1 (μmol/L)^?1 for peaks T, M and C, respectively, in line with the history of strong photobleaching of the water samples as indicated by fairly high absorption spectral slope ratios (0.75–1.53 with a mean 1.03). Intermediate fluorescence index (FI) (1.46–1.83 with a mean 1.61) and small specific absorption at 254 nm (0.64–1.93 with a mean 1.15 m^?1 mg^?1 L) of the water samples, indicated the presence of both aquatic microbial DOM (e.g. peak T) and soil DOM (e.g. peak C). Peak C could be substantially removed by UV-A (320–400 nm) irradiation, while peak M was slightly increased when a microbe-containing water was exposed to the same UV-A irradiation. Taken together, peak C was attributed to diffuse soil source while peak M was likely attributed to joint effects of microbial activities and solar irradiation on the chromophores in the sample.     

The use of Bayesian methods for fitting rating curves,with case studies

Using data from two very large watersheds and five smaller, this paper explores the use of Bayesian methods for fitting rating curves. Posterior distribution of rating-curve parameters were calculated using Markov Chain Monte Carlo (MCMC) methods, and 95% credible intervals were calculated for predicted discharges, given stage. Expected discharge was related to stage using a link function. For the five smaller watersheds, the assumptions were (a) that the distribution of discharge Q, given stage h, is Normal, with variance proportional to h; (b) that a log link function relates μ_Q, the mean of Q∣h, to a function of stage, of the form μ_Q = β(h + α)^λ. For the two large watersheds, however, a better fit was obtained by taking the distribution of Q to be log-Normal, and the link function as ln μ_Q = β₀ + β₁h. For the two large watersheds, priors for all three parameters were taken as uninformative; for the five smaller, the prior for parameter λ was taken as Normally distributed, N(2, 0.5). Acceptable ratings were obtained for all seven sites. It is argued that distributions of derived variables (such as annual maximum discharge) can be derived directly from (a) the posterior distribution of rating-curve parameters, and (b) the stage record, without recourse to additional assumptions. Estimates thus obtained for the T-year event will incorporate rating-curve uncertainty. It is argued that Bayesian methods are appropriate for rating-curve calculation because their inherent flexibility (a) allows the incorporation of prior information about the nature of a rating curve; (b) yields credible intervals for predicted discharges and quantities derived from them; (c) can be extended to allow for uncertainty in stage measurements.     

On the interpolation of volumetric water content in research catchments

Digital Soil Mapping (DSM) is widely used in the environmental sciences because of its accuracy and efficiency in producing soil maps compared to the traditional soil mapping. Numerous studies have investigated how the sampling density and the interpolation process of data points affect the prediction quality. While, the interpolation process is straight forward for primary attributes such as soil gravimetric water content (θ_g) and soil bulk density (ρ_b), the DSM of volumetric water content (θ_v), the product of θ_g by ρ_b, may either involve direct interpolations of θ_v (approach 1) or independent interpolation of ρ_b and θ_g data points and subsequent multiplication of ρ_b and θ_g maps (approach 2). The main objective of this study was to compare the accuracy of these two mapping approaches for θ_v. A 23 ha grassland catchment in KwaZulu-Natal, South Africa was selected for this study. A total of 317 data points were randomly selected and sampled during the dry season in the topsoil (0–0.05 m) for θ_g by ρ_b estimation. Data points were interpolated following approaches 1 and 2, and using inverse distance weighting with 3 or 12 neighboring points (IDW3; IDW12), regular spline with tension (RST) and ordinary kriging (OK). Based on an independent validation set of 70 data points, OK was the best interpolator for ρ_b (mean absolute error, MAE of 0.081 g cm⁻³), while θ_g was best estimated using IDW12 (MAE = 1.697%) and θ_v by IDW3 (MAE = 1.814%). It was found that approach 1 underestimated θ_v. Approach 2 tended to overestimate θ_v, but reduced the prediction bias by an average of 37% and only improved the prediction accuracy by 1.3% compared to approach 1. Such a great benefit of approach 2 (i.e., the subsequent multiplication of interpolated maps of primary variables) was unexpected considering that a higher sampling density (∼14 data point ha⁻¹ in the present study) tends to minimize the differences between interpolations techniques and approaches. In the context of much lower sampling densities, as generally encountered in environmental studies, one can thus expect approach 2 to yield significantly greater accuracy than approach 1. This approach 2 seems promising and can be further tested for DSM of other secondary variables.     

The unique environment of the most acidified permanently meromictic lake in the Czech Republic

Changes in the water properties and biological characteristics of the highly acidic Hromnice Lake (Western Bohemia) were investigated. This 110-year-old lake, formed as a consequence of the mining of pyritic shales, is permanently meromictic. Two chemoclines separate an extremely acidic (pH ～ 2.6) mixolimnion from a metal-rich anoxic monimolimnion. The absence of spring mixolimnetic turnover due to ice melting and very slow heat propagation through the chemocline with a 6-month delay were observed. Extreme mixolimnetic oxygen maxima (up to 31 mg l^?1) in phosphorus-rich lake (PO₄^3? up to 1.6 mg l^?1) well correlated with outbursts of phytoplankton. Phytoplankton consist of several acido-tolerant species of the genera Coccomyxa, Lepocinclis, Chlamydomonas and Chromulina. Surface phytoplankton biomass expressed as chlorophyll-a varies from 2 to 140 μg l^?1. Multicellular zooplankton are almost absent with the exception of Cephalodella acidophila, a small rotifer occurring in low numbers. Large red larvae of the midge Chironomus gr. plumosus were found at the bottom close to the shore, with larvulae in the open water. Developmental stages (protonemata) of a moss, resembling filamentous algae, dwell in the otherwise plant-free littoral zone.     

Removal of heavy metals from contaminated water using ethylenediamine-modified green seaweed (Caulerpa serrulata)

The demand for clean water is on the increase as the population increases. One of the ways to address the water shortage is to treat the polluted water through removal of the contaminants. The use of adsorbents for pollutant removal is one of the promising methods. Seaweed is an aquatic plant and its sorption ability for selected metals in water was investigated in this study. We report the performance of the seaweed (Caulerpa serrulata) before and after modification with ethylenediamine (EDA), on adsorption of copper, lead and cadmium in aqueous solution. The adsorption capacities for Cu, Cd and Pb were 5.27 mg g⁻¹, 2.12 mg g⁻¹ and 2.16 mg g⁻¹, respectively, with the EDA-modified seaweed, and 3.29 mg g⁻¹, 4.57 mg g⁻¹ and 1.06 mg g⁻¹, with the unmodified weed, respectively. The pH for maximum adsorption was found to be within the range of pH 4–pH 6. In a separate investigation, it was found that 0.1 g of dried seaweed leached 20 mg of dissolved organic carbon (DOC) using 100 ml of distilled-deionised water. The resulting solution was green. The leaching phenomenon contributes to secondary pollution. Modification of the seaweed with EDA reduced the DOC content by half (50%) and also removed the green colouration. Kinetic studies showed that the adsorbent was able to take up to 95% of the metals (in synthetic standard solutions) in less than 10 min. The adsorbed metals were then stripped using a solution of 0.5 M HNO₃ indicating that the adsorbent can be regenerated. In addition, the study revealed that modification improved the thermal stability of the adsorbent such that even when the temperature was raised to 1000 °C, more than 80% (compared to <50% for unmodified weed) of the modified adsorbent was not degraded, indicating that modification had a significant influence on the thermal stability of seaweed. The modified seaweed has been shown to have great potential for the removal of metals and DOC in polluted water. The modified adsorbent can therefore be applied for the removal of metals in polluted waters hence suitable for treatment of water for domestic consumption at a point of use.     

Effect of prolonged hypoxia on food consumption,respiration, growth and reproduction in marine scavenging gastropod Nassarius festivus

The effects of prolonged exposure to reduced oxygen levels (3.0 and 1.5 mg O₂ l⁻¹) on marine scavenging gastropods Nassarius festivus were studied for 8 weeks. The percentages of individuals engaged in feeding and amount of food consumed were reduced as oxygen level decreased; absorption efficiency, however, did not vary significantly with oxygen level. Oxygen consumption rates and specific oxygen consumption rates were lower at reduced oxygen levels. Reproduction occurred at all oxygen levels with less egg capsules being produced at lower oxygen levels. Egg size and number of eggs per capsule, however, were not significantly affected by oxygen level. The increase in shell length was 12%, 6% and 5% at 6.0 mg O₂ l⁻¹ (normoxia), 3.0 mg O₂ l⁻¹ and 1.5 mg O₂ l⁻¹, respectively. At the end of the experiment, the amount of energy allocated to growth and reproduction decreased at reduced oxygen levels with values obtained at 3.0 mg O₂ l⁻¹ and 1.5 mg O₂ l⁻¹ being 48% and 70% lower than those at 6.0 mg O₂ l⁻¹. At all oxygen levels, most of the accumulated energy was allocated to shell growth and reproduction, and the amount allocated to somatic growth was relatively insignificant. The reduction in energy allocated to reproduction was greater than that to shell growth as the oxygen level was reduced, indicating a strategic energy allocation of marine scavengers under stressful conditions to enhance survival.     

Recycling of harbor sediment as lightweight aggregate

Sediment sampled from Taichung Harbor was mixed with local reservoir sediment at different weight ratios to prepare lightweight aggregate at 1050, 1100, and 1150 °C. A pressure of 3000 or 5000 psi was used to shape the powder mixtures into pellets before the heating processes. The results indicate that the leaching levels of trace metals from the lightweight aggregate samples are considerably reduced to levels less than Taiwan Environmental Protection Administration regulatory limits. Increasing final process temperature tends to reduce the bulk density and crushing intensity of lightweight aggregate with a concomitant increase in water sorption capability. Lightweight aggregate with the lowest bulk density, 0.49 g cm⁻³ for the 5000 psi sample, was obtained with the heating process to 1150 °C. Based on the X-ray absorption near edge structure results, FeSO₄ decomposition with a concomitant release of SO_x (x = 2, 3) is suggested to play an important role for the bloating process in present study.     

Biosorption of heavy metals in polluted water,using different waste fruit cortex

The biosorption capacity of different cortex fruit wastes including banana (Musa paradisiaca), lemon (Citrus limonum) and orange (Citrus sinensis) peel were evaluated. In order to perform these experiments, grinded dried cortexes were used as package in 100 mm high, 10 mm i.d. columns. The grinded material was powdered in a mortar and passed through a screen in order to get two different particle sizes, 2 and 1 mm, for all powders. To estimate the biosorption capabilities of the tested materials, different heavy metals were passed through the columns and the elution filtrate reloaded different times to increase the retention of metals. The heavy metals used were prepared as synthetic samples at 10 mg/L of Pb(NO₃)₂, Cd(NO₃)₂, and Cu(NO₃)₂·6H₂O using primary standards. In preliminary experiments using banana cortex, it was found that material with 1 mm of particle size showed higher retention capability (up to12%) than the material with 2 mm of particle size. Considering these results, 1 mm particle size material was used in further experiments with the other waste materials. It was found that for Pb and Cu removal, lemon and orange cortex showed better biosorption capability when compared with banana cortex (up to 15% less for Pb and 48% less for Cu). For Cd, banana cortex showed better biosorption capability 57% (67.2 mg/g of cortex) more than orange (28.8 mg/g of cortex), and 82% more than lemon (12 mg/g of cortex). Reload of the columns with the filtrate after passing through the column improved the removal capability of all the materials tested from 10% to 50% depending on the cortex and metal tested.     

Temperature increase and respiratory performance of macroinvertebrates with different tolerances to organic pollution

Respiration rates (mg O₂ g^?1 AFDW h^?1) of Leuctra hippopus, Sericostoma personatum, Helodes minuta, Gammarus pulex and Asellus aquaticus were studied across an oxygen gradient at 2.8 and 6.3 °C, corresponding to an expected 3.5 °C increase in Danish winter stream temperature. Species were selected from the Danish Stream Fauna Index (DSFI), representing an expected hierarchy of tolerance towards water quality degradation. We expected that low-ranking, tolerant species (i.e. indicators of bad water quality) would have the capacity to regulate their oxygen uptake relatively independently of oxygen availability (oxy-regulators) and high-ranking, sensitive species (i.e. indicators of good water quality) would be less able to do so (oxy-conformers). For all species respiration rate was higher (although non-significantly) at 6.3 °C. The species’ oxy-regulatory capacity did not consistently reflect their DSFI ranking. As expected, and in accordance with its DSFI ranking, A. aquaticus had the highest oxy-regulatory capacity with the ability to regulate O₂ uptake until an oxygen saturation of only 20%, which did not change with increasing temperature, emphasizing the robustness of A. aquaticus towards changes in the environment. S. personatum, H. minuta and G. pulex revealed no oxy-regulatory capacity. In contrast, the plecopteran L. hippopus did display an unexpected oxy-regulatory capacity. Though an increase in temperature changed L. hippopus’ capacity to oxy-regulate (the critical limit increased from 32.5 to 43.5% oxygen), respiration rates did not change significantly in spite of the temperature increase. This result contradicts the general belief that stoneflies, because of their affinity to well oxygenated habitats, are conformers. Our findings call for further studies on the respiratory conformer–regulator concept and its role as an eco-physiological trait for bio-assessment.     

Adsorption behaviour of dibutyl phthalate on marine sediments

Laboratory experiments were carried out to investigate the adsorption behaviour of dibutyl phthalate (DBP) on marine sediments collected from five different sites in Victoria Harbour, Hong Kong. DBP adsorption can be well described by the Langmuir isotherm. The maximum DBP adsorption capacity (Q_max) of the marine sediments ranges from 53 to 79 mg g⁻¹, which has a positive correlation with their organic content. Around 90% of the organic can be removed from the sediments with treatment by H₂O₂ oxidation, and the Q_max then decreases to a range between 13 and 22 mg g⁻¹. The black carbon content of the sediments has a much greater DBP adsorption capacity than does the natural organic matter of the sediments. The amount of DBP adsorbed on the sediments increases as the salinity of the marine water increases.