首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
九子沟铜矿是凤县-太白铅锌多金属矿集区近年来发现的新矿床。矿化类型主要表现为硅质岩型、硅化灰岩型和石英-方解石脉型。矿体主要呈层状、似层状、透镜状与围岩整合产出,且多被后期顺层或切层含矿石英-方解石脉交代,形成富矿体。综合地质特征和地球化学特征,认为该矿床成因类型为喷流沉积-改造型铜矿。九子沟等铜矿床(点)与区域上的铅锌矿床构成了热水喷流沉积矿床的元素分带模式。这一发现,指示今后该地区可在热水喷流沉积矿床元素分带模式的基础上,结合区带内背斜控矿的地质特征开展找矿工作。  相似文献   

2.
林方成 《地质学报》2005,79(4):i0007-i0008
20世纪90年代以来,四川地矿局207地质队及地方采矿业在扬子地台西缘大渡河谷沿岸,相继发现了黑区—雪区、红花、白熊沟、核桃坪、养善坪—中溪坪—宝水溪—双凤沟等层状铅锌矿床及矿点。其中,黑区—雪区矿床的矿体地表露头长达6000m,估算的铅锌资源量达370万吨,达到超大型矿床的规模。不同的矿床、矿点的分布构成了长度大于50km的铅锌矿化带,预测铅锌资源量有望达1000万吨以上。各矿床、矿点产于上震旦统—下寒武统灯影组顶部麦地坪段含磷硅质白云岩的相同层位,矿化与硅质岩及角砾状白云岩层关系密切。矿床中发育层状、纹层状、条带状、同沉积角砾状、层间揉皱等构造,沉积特征明显。矿床的地质、地球化学特征显著区别于区域上以往发现的产于地台盖层碳酸盐岩中具有明显后生成因特点的密西西比河谷型(MVT型)铅锌矿床,也有别于产于中元古界褶皱基底中的火山沉积块状硫化物型(VMS型)铅锌矿床。笔者的研究表明,与铅锌矿密切共生的硅质岩为典型的海底热水沉积产物,铅锌矿床属于海底喷流—沉积成因(SEDEX型);成矿作用受晚震旦世—早寒武世北东东向延伸的汉源—峨眉凹陷及同生断裂带的控制。该类层状铅锌矿床可能是扬子地台西缘铅锌矿聚区中最具找矿潜力的矿床类型。  相似文献   

3.
近年来,旬北铅锌矿集区发现了长达近百公里的铅锌矿带及钠长石岩带,铅锌矿多顺层整合产在以志留系为主的细碎屑岩中,沉积特征明显,含矿层内热水沉积岩发育,围岩蚀变不明显,矿体下部钠长石岩发育,底板多见铁碳酸盐岩,矿层内常见热水沉积微晶硅质岩,矿石多具块状、层状、层纹状构造。热水沉积可能是铅锌矿主要成矿方式,成矿物质来自盆下深处。  相似文献   

4.
底舒大梁子铅锌矿床含硫化物硅质岩热水沉积地质地球化学标志朱赖民,栾世伟,袁海华(成都理工学院,成都610059)关键词含硫化物硅质岩,热水沉积,地质地球化学标志,铅锌矿床近年来,作者在研究四J;D底舒和大梁子铅锌矿床时,在赋矿震旦系灯影组碳酸盐岩层中...  相似文献   

5.
新近在南秦岭旬阳盆地志留系中发现重要铅锌矿化,含矿岩系主要是下、中志留统弱变质含炭细碎屑岩和新发现识别出的热水沉积炭硅质岩、钠长石岩等;矿体呈层状与志留系整合产出,含矿层中有热水沉积硅质岩和铁碳酸盐岩。矿床REE地球化学反映铅锌矿石、硅质岩和钠长石岩的形成物质可能来自盆下源深处,成岩成矿作用具有热水沉积性质;岩矿石稳定同位素组成指示成矿流体为深部来源,成矿流体中富含CO2(18.656~35.063mol%),成矿温度135~297℃;矿石S和Pb同位素组成反映S来源于深部,Pb来自盆地基底和沉积地层。受地幔热点控制的扬子北缘古生代伸展海盆中,热水沉积是旬阳盆地志留系铅锌成矿的基本方式。  相似文献   

6.
新近在南秦岭旬阳盆地志留系中发现重要铅锌矿化,含矿岩系主要是下、中志留统弱变质含炭细碎屑岩和新发现识别出的热水沉积炭硅质岩、钠长石岩等;矿体呈层状与志留系整合产出,含矿层中有热水沉积硅质岩和铁碳酸盐岩.矿床REE地球化学反映铅锌矿石、硅质岩和钠长石岩的形成物质可能来自盆下源深处,成岩成矿作用具有热水沉积性质;岩矿石稳定同位素组成指示成矿流体为深部来源,成矿流体中富含CO2(18.656~35.063mol%),成矿温度135~297℃;矿石S和Pb同位素组成反映S来源于深部,Pb来自盆地基底和沉积地层.受地幔热点控制的扬子北缘古生代伸展海盆中,热水沉积是旬阳盆地志留系铅锌成矿的基本方式.  相似文献   

7.
在西成铅锌成矿带中,硅质岩是主要的含矿岩石之一。硅质岩常呈层状、似层状和透镜状产出,具有块状、纹层状、角砾状和多孔状构造。硅质岩中常有热不沉积矿物重晶石、铁白云石和草莓球状黄铁矿出现。在毕家册一邓家册式热水沉积改造矿床中,硅质岩与生物碎屑灰岩-含炭质生物碎屑灰岩-硅质岩-泥质岩组成特征的含矿沉积建造,且硅质岩的厚度与铅锌矿化成正比。硅质岩的主成分为SiO2,平均含量为90%,次为Al2O3、Fe2  相似文献   

8.
西秦岭造山带东段西成矿田内发育一系列泥盆纪的喷流沉积型(SEDEX)铅锌矿床,甘肃徽县洛坝铅锌矿床就是其中的代表型矿床之一。它产于中泥盆统安家岔组焦沟层上部,矿体分布受洛坝背斜和南、北两翼断裂控制,与地层产状基本一致,矿石主要为纹层状、层状、浸染状、块状构造。经过详细的显微构造和SEM扫描电镜分析,鉴定出与喷流沉积有关的通道构造、淬火构造等。矿床地球化学分析显示,该矿床赋矿围岩的Ba、As、Sb、B、Ag、Hg等喷流沉积指示元素值均较高,且两者均具有LREE相对富集、明显的Eu正异常和中等Ce正异常特征,对比表明,成矿流体中的REE主要继承赋矿围岩(硅质岩)。矿床包裹体及硫同位素分析表明:成矿温度为168~350℃,以中、高温为主;早期矿化硫化物的δ34S值(平均9.8‰)明显大于晚期矿化硫化物的δ34S值(平均5.6‰),说明后期改造作用中有地层硫的参与。综合研究表明,该矿床为热水喷流沉积型铅锌矿床,后期又受到海西期-印支期的叠加改造,并确定该矿床为秦岭后造山期板内伸展热水喷流的产物,最后建立了洛坝铅锌矿床热水喷流沉积成矿模式。  相似文献   

9.
红墩铅锌矿床与哈腊苏铅锌矿床均产于新疆阿尔泰造山带南缘克兰晚古生代火山-沉积盆地内,容矿地层为中泥盆统阿勒泰镇组下亚组第二岩性段,赋矿岩石为纹层状硅质岩及变石英粉砂岩。主要矿体呈似层状、透镜体状顺层产出,矿石具条纹、条带状、块状构造,矿体严格受层位和岩相控制,矿石沉积特征明显,均表现为锌多铅少,且闪锌矿为含铁较少的低温闪锌矿,红墩铅锌矿床不含铜,而哈腊苏铅锌矿含少量铜,与矿化有关的围岩蚀变均表现为硅化、褐铁矿化、白云母化、钠长石化、黄铁矿化等。哈腊苏铅锌矿床尚属首次发现,通过综合对比研究,表明哈腊苏铅锌矿床可能位于红墩铅锌矿床的东延带上,与红墩铅锌矿床成因类型相同,归属于SEDEX型铅锌矿床。  相似文献   

10.
四川省雷波县瓦岗磷矿位于川西南磷矿矿集区的南部,矿体赋存于下寒武统麦地坪组第二段,呈层状展布于瓦尼觉背斜两翼,含矿建造为硅质岩-碳酸岩-磷块岩,矿石结构构造为球状、团块状、条带状,文章通过对矿石和围岩地质特征研究,认为矿床形成于海湾潮下低能带的古地理环境,成因主要为富磷生物碎屑沉积聚集而成。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

13.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

18.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

19.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

20.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号