Kinematics and geochronology of Early Cretaceous thrusting in the northwestern paleozoic of Graz (Eastern Alps)

Abstract

The multiply deformed Upper Austro-Alpine nappe pile of the Graz area is built up of low-grade metamorphosed Paleozoic rocks which are discordantly overlain by sediments of Santonian (Late Cretaceous) age (“Gosau” formation). Slices of Permo-Mesozoic rocks are absent. Analyses of structures, microfabrics, strain and shear directions were used to decipher the kinematic history; geochronological investigations to date the age of thrusting. K/Ar and Rb/Sr ages of synkinematically grown mica suggest an eo-Alpine (Early Cretaceous) age for the major deformation D1. D1 is characterized by non-coaxial rock flow which caused SW- to W directed nappe imbrication. Incremental strain measurements indicate the progressive superposition of D2 over Dl. In the higher nappe (Rannach Nappe) nappe imbrication continued during D2 changing the direction of nappe transport from SW to NW. Enhanced flattening strain in the deeper nappe (Schöckel Nappe) led to recumbent folds in all scales during D2. This study emphasized two interpretations : (1) The Alpine deformation in the Upper Austro-Alpine nappe pile of the Paleozoic of Graz started in the Earliest Cretaceous (about 125 Ma.). (2) The emplacement of nappes followed a curved translation path in the studied area.     

Transpressional deformation in northwestern Sardinia (Italy): insights on the tectonic evolution of the Variscan BeltDéformation transpressive dans le Nord-Ouest de la Sardaigne (Italie) : considérations sur l'évolution tectonique de la chaı̂ne Varisque

Structural investigations in northwestern Sardinia highlight the occurrence of a regional D2 transpressional deformation related both to NNE–SSW direction of compression and to a NW–SE shear displacement. The deformation is continuous and heterogeneous, showing a northward strain increase, indicated by progressively tighter folds and occurrence of F2 sheath folds. D2 transpression is characterised by the presence of a crustal-scale shear deformation overprinting previous D1 structures, related to nappe stacking and top-to-the-south and southwest thrusting. The L2 prominent stretching lineation points to an orogen-parallel extension and to a change in the tectonic transport from D1 to D2. It is attributed to the position of Sardinia close to the northeastern part of the Cantabrian indenter during the progressive evolution of the Ibero-Armorican Arc. D1 phase developed during initial frontal collision, whereas D2 deformation characterised the progressive effect of horizontal displacement during the increasing curvature of the arc. To cite this article: R. Carosi, G. Oggiano, C. R. Geoscience 334 (2002) 287–294.     

Local shear zone pattern and bulk deformation in the Gran Paradiso metagranite (NW Italian Alps)

The Gran Paradiso nappe of the northwestern Alps mostly consists of augen gneisses derived from the Alpine deformation of Permian granitoids. The regional foliation of the augen gneisses developed at lower amphibolite facies conditions and is associated with a top-to-west sense of shear. The granitoid protolith is preserved in the kilometre-scale low-strain domain of the Piantonetto Valley and mainly consists of a porphyritic metagranite including joints, leucocratic dykes and biotite-rich schlieren. In this low-strain domain, the Alpine deformation is mainly localized in discrete ductile shear zones within weakly foliated metagranite. The shear zones mostly dip towards S–SE in a shallow (shear zones ₁) to steep inclination (shear zones ₂). The shear zones show typical features that can be explained by reactivation of pre-existing joints and planar compositional heterogeneities. Palaeostress and strain analysis indicate that shear zones and the metagranite foliation both formed in the presence of a strong component of flattening. The kinematics of individual shear zones depends on the orientation of the original heterogeneities (acting as nucleation planes) and by partitioning of strain components at the kilometre-scale with concentration of the flattening component to the Piantonetto low-strain domain. The strain geometry and the kinematics of individual shear zones within Piantonetto are not directly connected to the top-to-west sense of tectonic transport observed elsewhere in the Gran Paradiso nappe. However, the bulk stress ellipsoid reconstructed for the incipient shear zone network within very weakly deformed granites is oriented consistently with the bulk direction of tectonic transport within the Gran Paradiso massif. We conclude that the shear zone network of the Piantonetto Valley is representative of the incipient stages of ductile deformation of a granite nappe. Even if its architecture is determined by the arrangement of pre-existing structural and compositional heterogeneities, aspects of the large-scale bulk strain can be derived from this local shear zone pattern.     

Structural evolution of a briançonnais cover nappe,the caprauna-armetta unit (ligurian alps,Italy)

The Caprauna-Armetta Unit (CAU) is a Briançonnais cover nappe emplaced on the external margin of the Ligurian Briançonnais Zone. A structural analysis of the nappe indicates that there are four superposed deformations (D₁-D₄). D₁ produced large recumbent isoclinal folds associated with a strong axial-plane cleavage and a SW-trending lineation. These folds can be related to a SW-directed overthrust shear. D₂ produced open to moderately tight folds with subvertical axial planes, overturned towards the northeast. D₃ and D₄ are represented by large wavelength open folds affecting only the large-scale setting of the nappe.A finite strain map of the nappe has been compiled using data from an oolitic limestone layer. The measured strains appears to be essentially the product of the D₁ phase. The measured ellipsoids are generally triaxial. The trend of the finite strain X axes is towards the southwest. Prolate ellipsoids with very high R_xz ratios occur on the inverted limbs and sometimes near the hinge zones of the anticlinal F₁ folds. Oblate ellipsoids are prevalent on the normal limbs. This pattern of finite strain resulted from deformation in a ductile shear zone generated within the tectonic units trailed at the base of the huge Helminthoid Flysch Nappe during its motion towards the foreland.     

Variscan deformation,microstructural zonation and extensional exhumation of the Moravian Cadomian basement

Abstract

The Cadomian Dyje Batholith, in the foot–wall of the Variscan Moravian nappe pile, has been involved in Variscan ductile deformation. The Cadomian Brunovistulian rocks were obliquely underthrusted during Carboniferous dextral transpression.

Strain intensity is inversely proportional to the distance from the contact of the Variscan thrust front. The microstructures of deformed granodiorites and quartz–diorites show a characteristic zonality marked by relatively high temperature flow in the west (550–580 °C) characterized by dynamic recrystallization of feldspars and grain boundary migration recrystallization of quartz. The size of quartz grains decreases with decreasing strain towards the east. At the easternmost part of the autochthonous Dyje massif, fracturing of feldspar and subgrain rotation recrystallization of quartz predominate. Flow stress estimates calculated from recrystallized quartz grain size show a regional increase of stress intensity from the highly strained margin towards the less deformed core of the Dyje massif. This microstructural zonation is oblique with respect to the major thrust boundary and corresponds roughly to metamorphic isogrades. The microstructural zonation reflects underthrusting of the Brunovistulian domain below the Moldanubian nappe.

The main ductile tectonic event D₁ is followed by a retrogressive brittle–ductile and brittle deformation D₂. D₂ results in the development of shear zones and faults superimposed on the D₁ mylonite fabric. D₂ is related to extension oblique to the D₁ fabric, associated with detachment and the westward movement of the Moravian nappes. © Elsevier, Paris     

Transverse lineation and large-scale structures related to Alpine obduction in Corsica

In Alpine Corsica, the major tectonic event during the late Cretaceous was the thrusting to the west of an ophiolitic nappe and its sedimentary cover upon the Variscan basement and its Mesozoic cover. A detailed field survey shows that the basal contact of the nappe corresponds to a pluri-kilometric scale shear zone. Thus gneissified basement slices have been tectonically emplaced in the ophiolitic nappe. The thrusting was responsible for small scale structures: foliation, lineation and folds, initiated in a HP/LT metamorphic context. The deformation analysis shows that the finite strain ellipsoid lies in the constriction field close to that for plane strain. Moreover occurrences of rotational criteria in the XZ planes (sigmoidal micas, asymmetric pressure shadows, quartz C-axes fabrics) are in agreement with shear from east to west. All structural data from microscopic to kilometric scales, of which the most widespread is a transverse stretching lineation, can be interpreted by a simple shear model involving ductile synmetamorphic deformation. At the plate tectonic scale the ophiolitic obduction is due to intraoceanic subduction blocked by underthrusting of continental crust beneath oceanic lithosphere.     

The P-T evolution of the Middle Köli Nappe Complex,Scandinavian Caledonides (68° N) and its tectonic implications

Near 68° N the Scandinavian Caledonides are composed of 3 tectonic domains each of which has a different tectonostratigraphy. The lower 2 domains can be related stratigraphically to Scandinavia prior to Caledonian deformation, whereas the highest domain, the Middle Köli Nappe Complex (MKNC) represents a fore-arc accretionary complex that was accreted to Scandinavia during Caledonian deformation. Subsequent to accretion, the flyschoid sediments that dominate the MKNC were metamorphosed to the amphibolite facies. In the area covered by this study, the MKNC is composed of two nappes, a lower Langvatn nappe and an upper Marko nappe, each of which has a unique early metamorphic history. Pelitic mineral assemblages in the Marko nappe constrain the peak P-T to be: 625°<T<775° C and P>7.0 kbars whereas ultramafic mineral assemblages in the lower Langvatn nappe constrain its peak temperature to be <580° C. P-T estimates from garnet-biotite and garnet-plagioclase geothermobarometry for both nappes overlap; ranging from 528° C and 6.6 kbars to 620° C and 8.8 kbars, with an average of 567±32° C and 8.0±0.9 kbar.Analysis of garnet zonation profiles from low variance pelitic assemblages from the Marko nappe using the Gibbs method of Spear and Selverstone (1983) suggests that P-T paths showing cooling (37–125° C) and decompression (20–1700 bars) were followed during the development of the outer part of garnet zonation profiles. The slope of these retrograde P-T paths is approximately 15 bars/° C. Because of the high variance of pelitic assemblages from the Langvatn nappe P-T paths have not been determined.The retrograde cooling rate of the Marko nappe has been estimated by numerical modeling of garnet zonation profiles that are interpreted to have formed by volume diffusion during retrograde cooling. This modeling suggests that the Marko nappe cooled very rapidly (25–100° C/m.y.) between the metamorphic peak and the temperature at which cation-exchange reactions closed. The form of Langvatn nappe garnet zonation profiles suggests that it did not undergo this rapid cooling.The cooling rate estimated for the Marko nappe is probably too high to be produced by unroofing alone and may be the result of late metamorphic thrusting and imbrication within the MKNC during which the cooler Langvatn nappe was underthrust beneath the warmer Marko nappe. The metamorphic peak of the Marko nappe therefore predates the peak of the Langvatn nappe. The peak P-T of the Langvatn nappe and the P-T recorded by geothermobarometry (570° C, 8.0 kbar) approximates the conditions under which the two nappes were juxtaposed.     

The Rwenzori Mountains,a Palaeoproterozoic crustal shear belt crossing the Albertine rift system

This contribution discusses the development of the Palaeoproterozoic Buganda-Toro belt in the Rwenzori Mountains and its influence on the western part of the East African Rift System in Uganda. The Buganda-Toro belt is composed of several thick-skinned nappes consisting of Archaean Gneisses and Palaeoproterozoic cover units that are thrusted northwards. The high Rwenzori Mountains are located in the frontal unit of this belt with retrograde greenschist facies gneisses towards the north, which are unconformably overlain by metasediments and amphibolites. Towards the south, the metasediments are overthrust by the next migmatitic gneiss unit that belongs to a crustal-scale nappe. The southwards dipping metasedimentary and volcanic sequence in the high Rwenzori Mountains shows an inverse metamorphic grade with greenschist facies conditions in the north and amphibolite facies conditions in the south. Early D1 deformation structures are overgrown by cordierite, which in turn grows into D2 deformation, representing the major northwards directed thrusting event. We argue that the inverse metamorphic gradient develops because higher grade rocks are exhumed in the footwall of a crustal-scale nappe, whereas the exhumation decreases towards the north away from the nappe leading to a decrease in metamorphic grade. The D2 deformation event is followed by a D3 E-W compression, a D4 with the development of steep shear zones with a NNE-SSW and SSE-NNW trend including the large Nyamwamba shear followed by a local D5 retrograde event and D6 brittle reverse faulting. The Palaeoproterozoic Buganda-Toro belt is relatively stiff and crosses the NNE-SSW running rift system exactly at the node where the highest peaks of the Rwenzori Mountains are situated and where the Lake George rift terminates towards the north. Orientation of brittle and ductile fabrics show some similarities indicating that the cross-cutting Buganda-Toro belt influenced rift propagation and brittle fault development within the Rwenzori Mountains and that this stiff belt may form part of the reason why the Rwenzori Mountains are relatively high within the rift.     

Strain analysis and microstructural evolution characteristic of neoproterozoic rocks associations of Wadi El Falek,centre Eastern Desert,Egypt

The estimation of finite strain in rocks is fundamental to a meaningful understanding of deformational processes and products on all scales from microscopic fabric development to regional structural analyses. The R_f/φ and Fry methods on feldspar porphyroclasts and mafic grains from 5 granite, 1 metavolcanic, 3 metasedimentary and 1 granodiorite samples were used in Wadi El Falek region. Finite-strain data shows that a high to moderate range of deformation of the granitic to metavolcano-sedimentary samples and axial ratios in the XZ section range from 1.60 to 4.10 for the R_f/φ method and from 2.80 to 4.90 for the Fry method. Furthermore, the short axes are subvertical associated with a subhorizontal foliation. We conclude that finite strain in the deformed granite rocks is of the same order of magnitude as that from metavolcano-sedimentary rocks. Furthermore, contacts formed during intrusion of plutons with some faults in the Wadi El Falek area under brittle to semi-ductile deformation conditions. In this case, finite strain accumulated during superimposed deformation on the already assembled nappe structure. It indicates that the nappe contacts formed during the accumulation of finite strain.     

Crustal-scale extension in a convergent orogen : the Sterzing-Steinach mylomte zone in the Eastern Alps

Abstract

The western margin of the Tauera Window (Eastern Alps) is defined by a low angle westward dipping fault zone of potently We disp lacement. Ductile deformation of the fault rocks results in a carpet of mylonites up to 400 metres thick. Evidence from shear criteria and the excision of part of the Cretaceous-Tertiary metamorphic edifice both indicate normal displacements, and relative movement of Austroalpine nappe complex towards the west. The Sterzing-Steinach mylonite zone overprints the Alpine nappe edifice. Movements occurred on the cooling path of the Tauern metamorphism, and may be as recent as Middle Miocene.

The Kinematics and geometry of the mylonite zone constrain two likely t ectonic explanations that are both compatible with secondary thining of a thick orogenic wedge. (1) Ute the Austroalpine nappe pile due to tectonic unroofing of the Tauern window. (2) Continental escape by east-west stretching of the Alpine orogenic wedge in response to continental collision.     

Hybrid time integration and coupled solution methods for nonlinear finite element analysis of partially saturated deformable porous media at small strain

The goal of the paper is to determine the most efficient, yet accurate and stable, finite element nonlinear solution method for analysis of partially saturated deformable porous media at small strain. This involves a comparison between fully implicit, semi‐implicit, and explicit time integration schemes, with monolithically coupled and staggered‐coupled nonlinear solution methods and the hybrid combination thereof. The pore air pressure p_a is assumed atmospheric, that is, p_a=0 at reference pressure. The solid skeleton is assumed to be pressure‐sensitive nonlinear isotropic elastic. Coupled partially saturated ‘consolidation’ in the presence of surface infiltration and traction is simulated for a simple one‐dimensional uniaxial strain example and a more complicated plane strain slope example with gravity loading. Three mixed plane strain quadrilateral elements are considered: (i) Q4P4; (ii) stabilized Q4P4S; and (iii) Q9P4; “Q” refers to the number of solid skeleton displacement nodes, and “P” refers to the number of pore fluid pressure nodes. The verification of the implementation against an analytical solution for partially saturated pore water flow (no solid skeleton deformation) and comparison between the three time integration schemes (fully implicit, semi‐implicit, and explicit) are presented. It is observed that one of the staggered‐coupled semi‐implicit schemes (SIS(b)), combined with the fully implicit monolithically coupled scheme to resolve sharp transients, is the most efficient computationally. Copyright © 2015 John Wiley & Sons, Ltd.     

Evolution of a crustal-scale transpressive shear zone in the Albany–Fraser Orogen, SW Australia: 1. P–T conditions of Mesoproterozoic metamorphism in the Coramup Gneiss

The Albany–Fraser Orogen in southwestern Australia preserves an important thermo‐tectonic record of Australo‐Antarctic cratonic assembly during the Mesoproterozoic. New petrologic and thermobarometric data from the Coramup Gneiss (a 10 km wide zone of high strain rocks within the NE‐trending eastern Albany–Fraser Orogen) indicate at least two high‐grade metamorphic events during 1345–1140 Ma convergence and amalgamation of the West Australian and Mawson cratons. The first event (M1) involved c. 1300 Ma granulite facies metamorphism of the Coramup Gneiss (M1a: 800–850 °C, 5–7 kbar), followed by burial and recrystallization under high‐P conditions (M1b: 800–850 °C, c. 10 kbar) prior to high‐T decompression (M1c: 700–800 °C, 7–8 kbar) and the 1290–1280 Ma emplacement of Recherche Granite sills. The second event (M2) entailed high‐T, low‐P metamorphism within dextral D2 shear zones (M2a: 750–800 °C, 5–6 kbar), followed by fluid‐present amphibolite facies M2b retrogression. Subsequent sinistral D3 mylonites and pseudotachylites are considered contemporaneous with similar structures in the adjacent Nornalup Complex that postdate the c. 1140 Ma Esperance Granite. Our petrological and thermobarometric data permit two end‐member P–T‐time relationships between M1 and M2: (1) a single post‐M1b event involving continuous M1b–M1c–M2a–M2b cooling and decompression, and (2) a two‐stage post‐M1b evolution involving M1c metamorphism during the waning stages of an event unrelated causally or temporally to subsequent M2a metamorphism and D2 deformation. In a companion paper, new structural and U–Pb SHRIMP zircon data are presented to support a two‐stage P–T evolution for the Coramup Gneiss, with M1 and M2, respectively, reflecting thermo‐tectonic activity during Stage I (1345–1260 Ma) and Stage II (1215–1140 Ma) of the Albany–Fraser Orogeny.     

Estimation and removal of non-tectonic effects from gravity survey data

When gravity survey accuracies of a few microgals are sought, many correction factors must be accounted for, including meter calibration constants, water-table level fluctations, solid-earth tides, ocean tides and in some cases rapid atmospheric fluctuations. Calculation of most of these correction factors is relatively straightforward. However, the effects of ocean tide loading are not as easily estimated, partly due to the lack of knowledge of the ocean tides themselves. Amplitude and phase factors for the better-known ocean tide components O₁ and M₂ have been theoretically computed for a grid in southern California in order to correct gravity survey data at arbitrary locations for these ocean tidal-loading components. The gravity data from a three-month period were recorded on a tidal gravimeter at the station PAS and then hand-digitized in order to test the ocean tide estimation program. The O₁ and M₂ ocean tidal components were effectively reduced to less than 0.5 μGal. The remaining high-frequency tidal components appear to be K₁ and S₂. If the ocean tides are not taken into account, as much as 16–20 μGal of error can occur solely due to the effect of ocean loading on the gravitational tides when comparing two surveys near Pasadena. The effect increases towards the coastline and decreases inland. Examples of reduced data from the CIT gravity survey network, which has been observed on an approximately monthly basis since 1974, will be shown.     

A method for assessment of excavation damaged zone (EDZ) of a rock mass and its application to a dam foundation case

Excavation of slope is an unloading process, and also an energy releasing process when the stress in the rock mass is unloaded, leading to the rebounding deformation towards the free face. And then a zone, namely excavation damaged zone (EDZ), will be formed near the excavation boundary, where the rock is damaged or disturbed and its physical, mechanical and hydraulic properties are greatly changed. This paper is to put forward a new method to quantify the extent and damage degree of the EDZ according to the unloading strain energy which is released in the process of excavation. A simple relationship between unloading strain ε and accumulative opening displacement T of cracks, , is proposed to describe the damage degree of rock mass in the EDZ, where h is the depth variable in normal direction of the open cracks.This method is used to assess the EDZ of the dam foundation at Xiaowan hydropower station in southwestern China by the accumulative opening displacement curves of cracks along boreholes based on boreholes camera photos. We find that the EDZ can be naturally divided into two sub-zones, i.e. the excavation heavily disturbed sub-zone (EHDZ) and excavation slightly disturbed sub-zone (ESDZ), according to the variation of unloading strain ε. Two inflexions of the accumulative opening displacement curve indicate the lower limits of EHDZ and ESDZ respectively.     

Horizontal contraction or horizontal extension? Heterogeneous Late Eocene and early Oligocene general shearing during blueschist and greenschist facies metamorphism at the Pennine-Austroalpine boundary zone in the Western Alps

Mylonitic structures related to two orogenic events are described from the upper and lower contacts of the Combin zone and the immediately overlying upper Austroalpine Dent Blanche nappe/Mont Mary klippe and the directly underlying lower Austroalpine Etirol-Levaz slice. The first event, Late Eocene in age, commenced during blueschist facies P-T conditions, but pre-dated the peak of subsequent greenschist facies overprint. The second event, Early Oligocene in age, took place during retrograde greenschist facies conditions. Most sense of shear indicators associated with the retrograde mylonites indicate top SE shearing, but subordinate top NW displacing shear sense indicators have also been mapped. Mylonitic top SE shearing appears to be restricted to the Combin zone and its upper and lower contacts. Within the Dent Blanche nappe and Mont Mary klippe and at the base of the Etirol-Levaz slice, structures were observed which developed during blueschist/greenschist facies conditions and are, in conjunction with the P-T-t history of these rocks, inferred to be older. Associated kinematic data indicate a top NW shear sense. Comparable blueschist/greenschist facies shear sense indicators have not been observed in the Combin zone. Nonetheless, the foliation in the Combin zone shows a progressive evolution from blueschist facies to greenschist facies to retrograde greenschist facies conditions. This indicates that the Combin zone and the immediately over- and underlying Austroalpine units shared a common tectono-metamorphic evolution since the Late Eocene. Finite strain data reveal oblate strain fabrics, which are thought to result from a true flattening strain geometry. Flow path modelling reveals a general non-coaxial deformation régime and corroborates significant departures from a simple shear deformation. In the study area, mylonitic top SE shearing in the Combin zone is attributed to Early Oligocene backfolding and backthrusting of the Mischabel phase. Temperature-time curves suggest slight reheating in the Monte Rosa nappe underneath and cooling in the Dent Blanche nappe above the Combin zone, hence confirming a thrust interpretation for this event. The top NW displacing structures are thought to result from Late Eocene emplacement of the Dent Blanche nappe and the Combin zone onto the Middle Pennine Barrhorn series along the Combin fault. As related structures initiated during mildly blueschist facies conditions in the Dent Blanche nappe and the underlying Combin zone and both were emplaced together onto the greenschist facial Barrhorn series, it is concluded that the structures developed as the nappes moved upward relative to the earth's surface. Thus the Combin fault is regarded as a thrust. The geometry of this structure indicates that the Combin fault is an out of sequence thrust that locally cut down section. Hence, top NW out of sequence thrusting caused local thinning of the metamorphic/structural section in association with horizontal shortening. Out of sequence thrusts cutting down section, and back-thrusts, offer the possibility of explaining the pronounced break in the grade of metamorphism across the Combin fault, i.e. the contact between the eclogite facial Zermatt-Saas zone and the overlying lower grade Combin zone, by contractional deformation.     

Determining heterogeneous deformation for granitic rocks in the northern thrust in Wadi Mubarak belt,Eastern Desert,Egypt

Finite-strain was studied in the mylonitic granitic and metasedimentary rocks in the northern thrust in Wadi Mubarak belt to show a relationship to nappe contacts between the old granitic and metavolcano-sedimentary rocks and to shed light on the heterogeneous deformation for the northern thrust in Wadi Mubarak belt. We used the R_f/ϕ and Fry methods on feldspar porphyroclasts, quartz and mafic grains from 7 old granitic and 7 metasedimentary samples in the northern thrust in Wadi Mubarak belt. The finite-strain data shows that old granitic rocks were moderate to highly deformed and axial ratios in the XZ section range from 3.05 to 7.10 for granitic and metasedimentary rocks. The long axes (X) of the finite-strain ellipsoids trend W/WNW and E/ENE in the northern thrust in Wadi Mubarak belt. Furthermore, the short axes (Z) are subvertical associated with a subhorizontal foliation. The value of strain magnitudes mainly constants towards the tectonic contacts between the mylonitic granite and metavolcano-sedimentary rocks. The data indicate oblate strain symmetry (flattening strain) in the mylonitic granite rocks. It is suggested that the accumulation of finite strain was formed before or/and during nappe contacts. The penetrative subhorizontal foliation is subparallel to the tectonic contacts with the overlying nappes and foliation was formed during nappe thrusting.     

Structural history of high-pressure metamorphic rocks in the southern vanoise massif,french alps,and their relation to alpine tectonic events

A nappe of amphibolite-facies metamorphic rocks of pre-Permian age in the southern Vanoise massif (the Arpont schist) has been affected by an Alpine HP/LT metamorphism. The first mesoscopically recognizable deformation (D₁) post-dated the high-pressure peak (jadeitic pyroxene + quartz, glaucophane + ?lawsonite), and was associated with glaucophane + epidote. D₁ produced a flat-lying schistosity and a NW-trending glaucophane lineation, and was probably associated with nappe displacement involving NW-directed subhorizontal shear. D₂ formed small-scale folds and a foliation associated with chlorite + albite. The changing parageneses during the period pre-D₁ to D₁ to D₂ suggest decreasing pressure, so that the deformation appears to have been related to the uplift history, rather than to the process of tectonic burial. D₂ was followed by a static metamorphism (green biotite + chlorite + albite), possibly of Lepontine age. SE-directed backthrusting and folding (D₃), and later differential uplift along steep faults, took place under low-grade conditions.     

Evolution of quartz microstructures and textures during polyphase deformation within the Tauern Window (Eastern Alps)

The interior of the Tauern Window exposes underplated Penninic continental lithosphere and the overlying obducted Penninic oceanic crust within a large antiformal dome in the internal zone of the Eastern Alps. These units have been affected by a polyphase deformation history. Generally, three deformation events are distinguished. D₁ is related to underplating of, and top-to-the-N nappe stacking within, the Penninic continental units of the Tauern Window. Deformation stage D₂ is interpreted to reflect the subsequent continent collision between the Penninic continental units and the European foreland, D₃ is related to the formation of the dome structure within the Tauern Window. During thickening of continental lithosphere and nappe stacking (D₁), and subsequent intracontinental shortening (D₂), these tectonic units have been ductilely deformed close to a plane strain geometry. Conditions for the plastic deformation of the main rock-forming mineral phases (quartz, feldspar, dolomite, calcite) have prevailed during all three phases of crustal deformation. Generally, two types of quartz microstructures that are related to D₁ are distinguished within the Tauern Window: (a) Equilibrated and annealed fabrics without crystallographic preferred orientations (CPO) have only been observed in the central part of the southeastern Tauern Window, corresponding with amphibolite-grade metamorphic conditions. (b) In the northeastern and central part of the Tauern Window microstructures are characterized by quartz grains that show equilibrated shape fabrics, but well preserved CPO with type-I cross girdle distributions, indicating a deformation geometry close to plane strain. During D₂, two types of quartz microstructures are distinguished, too: (a) Quartz grains that show equilibrated shape fabrics, but well-preserved CPO. The c-axes distributions generally are characterized by type-I cross girdles, locally by type-II cross girdles, and in places, oblique single girdle distributions. (b) A second type of quartz microstructure is characterized by highly elongated grains and fabrics typical for dislocation creep and grain-boundary migration, and strong CPO. This type is restricted to the southern sections of the western and eastern Tauern Window. The c-axis distributions show type-I cross girdles in the western part of the Tauern Window and single girdles in the southeastern part. In the western part of the Tauern Window, a continuous transition from type (b) microstructures in the south to type (a) microstructures in the north is documented. The microstructural evolution also documents that the dome formation in the southeastern and western Tauern Window has already started during D₂ and has continued subsequent to the equilibration during amphibolite to greenschist facies metamorphism. D₃ is restricted to distinct zones of localized deformation. D₃-related quartz fabrics are characterized by the formation of ribbon grains; the c-axes show small-circle distributions around the Z-axis of the finite-strain ellipsoid. During exhumation and doming (D₃), deformation occurred under continuously decreasing temperatures.     

Tectonic significance of deformation patterns in granitoid rocks of the Menderes nappes, Anatolide belt, southwest Turkey

Deformation fabrics in Proterozoic/Cambrian granitic rocks of the Çine nappe, and mid-Triassic granites of the Bozdag nappe constrain aspects of the tectonometamorphic evolution of the Menderes nappes of southwest Turkey. Based on intrusive contacts and structural criteria, the Proterozoic/Cambrian granitic rocks of the Çine nappe are subdivided into older orthogneisses and younger metagranites. The deformation history of the granitic rocks documents two major deformation events. An early, pre-Alpine deformation event (D_PA) during amphibolite-facies metamorphism affected only the orthogneisses and produced predominantly top-to-NE shear-sense indicators associated with a NE-trending stretching lineation. The younger metagranites are deformed both by isolated shear zones, and by a major shear zone along the southern boundary of the Çine submassif. We refer to this Alpine deformation event as D_A3. D_A3 shear zones are associated with a N-trending stretching lineation, which formed during greenschist-facies metamorphism. Kinematic indicators associated with this stretching lineation reveal a top-to-south sense of shear. The greenschist-facies shear zones cut the amphibolite-facies structures in the orthogneisses. ²⁰⁷Pb/²⁰⁶Pb dating of magmatic zircons from a metagranite, which crosscuts orthogneiss containing amphibolite-facies top-to-NE shear-sense indicators, shows that D_PA occurred before 547.2ǃ.0 Ma. Such an age is corroborated by the observation that mid-Triassic granites of the Çine and Bozdag nappes lack D_PA structures. The younger, top-to-south fabrics formed most likely as a result of top-to-south Alpine nappe stacking during the collision of the Sakarya continent with Anatolia in the Eocene.