Diverse patterns of ascent,degassing, and eruption of rhyolite magma during the 1.8 ka Taupo eruption,New Zealand: Evidence from clast vesicularity

The 22 km³ (DRE) 1.8 ka Taupo eruption ejected chemically uniform rhyolite in a wide range of eruptive styles and intensities. The 7 eruptive units include the ‘type examples’ of phreatoplinian (units 3 and 4) and ultraplinian fall (unit 5) deposits, and low-aspect-ratio ignimbrite (unit 6). Contrasts in bulk vesicularity, vesicle (and microlite) number densities and the size distributions of bubbles (and crystals) in the Taupo ejecta can be linked to the influence of shallow conduit processes on volatile exsolution and gas escape, before and during eruption, rather than changes in pre-eruptive chemistry. Existing work has modeled the individual phases of this complex eruption but not fully explained the abrupt shifts in style/intensity that occur between phases. We link these rapid transitions to changes in vent position, which permitted contrasts in storage, conduit geometry, and magma ascent history.     

Pyroclastic phases of a rhyolitic dome-building eruption: Puketarata tuff ring,Taupo Volcanic Zone,New Zealand

The 14 ka Puketarata eruption of Maroa caldera in Taupo Volcanic Zone was a dome-related event in which the bulk of the 0.25 km³ of eruption products were emplaced as phreatomagmatic fall and surge deposits. A rhyolitic dike encountered shallow groundwater during emplacement along a NE-trending normal fault, leading to shallow-seated explosions characterised by low to moderate water/magma ratios. The eruption products consist of two lava domes, a proximal tuff ring, three phreatic collapse craters, and a widespread fall deposit. The pyroclastic deposits contain dominantly dense juvenile clasts and few foreign lithics, and relate to very shallow-level disruption of the growing dome and its feeder dike with relatively little involvement of country rock. The distal fall deposit, representing 88% of the eruption products is, despite its uniform appearance and apparently subplinian dispersal, a composite feature equivalent to numerous discrete proximal phreatomagmatic lapilli fall layers, each deposited from a short-lived eruption column. The Puketarata products are subdivided into four units related to successive phases of:(A) shallow lava intrusion and initial dome growth; (B) rapid growth and destruction of dome lobes; (C) slower, sustained dome growth and restriction of explosive disruption to the dome margins; and (D) post-dome withdrawal of magma and crater-collapse. Phase D was phreatic, phases A and C had moderate water: magma ratios, and phase B a low water: magma ratio. Dome extrusion was most rapid during phase B, but so was destruction, and hence dome growth was largely accomplished during phase C. The Puketarata eruption illustrates how vent geometry and the presence of groundwater may control the style of silicic volcanism. Early activity was dominated by these external influences and sustained dome growth only followed after effective exclusion of external water from newly emplaced magma.     

Dilute gravity current and rain-flushed ash deposits in the 1.8 ka Hatepe Plinian deposit,Taupo, New Zealand

Two groups of poorly sorted ash-rich beds, previously interpreted as rain-flushed ashes, occur in the ca. AD 180 Hatepe Plinian pumice fall deposit at Taupo volcano, New Zealand. Two ash beds with similar dispersal patterns and an aggregate thickness of up to 13 cm make up the lowermost group (A). Group A beds extend 45 km north-east of the vent and cover 290 km². In the southern part of the group A distribution area, a coarse ash to lapilli-size Plinian pumice bed (deposit B) separates the two group A beds. The scarcity of lapilli (material seen elsewhere from the still-depositing pumice fall) in group A beds indicates that they were rapidly transported and deposited. However, this rapid transportation and deposition did not produce cross-bedding, nor did it erode the underlying deposits. It is proposed that thick (>600 m) but dilute gravity currents generated from the collapsing outer margin of the otherwise buoyant Hatepe Plinian eruption column deposited the group A beds. The upper ash beds (group C) consist of one to seven layers, attain an aggregate thickness of 35 cm, and vary considerably in thickness and number of beds with respect to distance from vent. Group C beds contain variable amounts of ash mixed with angular Plinian pumices and are genuine rain-flushed ashes. Several recent eruptions at other volcanoes (Ukinrek Maars, Vulcan, Rabaul, La Soufrère de Guadeloupe and Soufrière, St Vincent) have produced gravity currents similar in style, but much smaller than those envisaged for group A deposits. The overloaded margins of otherwise buoyant eruption plumes generated these gravity currents. Laboratory studies have produced experimental gravity current analogues. Hazards from dilute gravity currents are considerable but often overlooked, thus the recognition of gravity current deposits will contribute to more thorough volcanic hazard assessment of prehistoric eruption sequences.     

Seismicity at White Island volcano, New Zealand: a revised classification and inferences about source mechanism

The classification of earthquakes at White Island volcano, New Zealand, has been revised to address problems in existing classification schemes, to better reflect new data and to try to focus more on source processes. Seismicity generated by the direct involvement of magmatic or hydrothermal fluids are referred to as volcanic, and that generated by fault movement in response to stresses caused by those fluids, regional stresses, thermal effects and so on are referred to as volcano-tectonic. Spasmodic bursts form a separate category, as we have insufficient information to classify them as volcanic or volcano-tectonic. Volcanic seismicity is divided into short-duration, long-period volcanic earthquakes, long-duration volcanic earthquakes, and harmonic- and non-harmonic volcanic tremor, while volcano-tectonic seismicity is divided into shallow and deep volcano-tectonic earthquakes. Harmonic volcanic tremor is related to sub-surface intrusive processes, while non-harmonic volcanic tremor originates close to active craters at shallow depth, and usually occurs during eruptive activity. Short-duration, long-period volcanic earthquakes come from a single source close to the active craters, but originate deeper than non-harmonic volcanic tremor, and are not related to eruptive activity. Long-duration volcanic earthquakes often accompany larger discrete eruptions. The waveform of these events consists of an initial low-frequency part from a deep source, and a later cigar-shaped part of mixed frequencies from a shallow crater source.     

Elliptical boundary of an intraplate volcanic field, Auckland, New Zealand

The outer vents in the Auckland Volcanic Field lie within 19 to 559 m (mean 224.75 m) of a ‘best-fit' ellipse with a 28.9-km-long major axis trending almost north–south, and a minor axis 16.5 km long. The ellipse has formed the outer boundary of the field since the inception of volcanism 140,000 years ago. We present the following testable hypotheses as an explanation of this pattern: The boundary is the expression of a corresponding elliptical source area at depth in the lithospheric mantle (possibly asthenosphere material trapped at this level). The ellipse may represent a depth contour on a very small upper mantle dome or of a lens intruding into a neck of an extensional structure. Alternatively it could be the boundary of a flat elliptical area where tensional stresses allow decompressional melting. The elliptical tensional region may either have developed in a releasing bend during strike-slip faulting along a fundamental lithosphere structure inherited from Mesozoic tectonics, associated with the NNW-trending Dun Mountain ophiolite belt, or may represent the tip of a fracture along which the Auckland Volcanic Province is propagating northward.     

Developing probabilistic eruption forecasts for dormant volcanoes: a case study from Mt Taranaki,New Zealand

The majority of continental arc volcanoes go through decades or centuries of inactivity, thus, communities become inured to their threat. Here we demonstrate a method to quantify hazard from sporadically active volcanoes and to develop probabilistic eruption forecasts. We compiled an eruption-event record for the last c. 9,500 years at Mt Taranaki, New Zealand through detailed radiocarbon dating of recent deposits and a sediment core from a nearby lake. This is the highest-precision record ever collected from the volcano, but it still probably underestimates the frequency of eruptions, which will only be better approximated by adding data from more sediment core sites in different tephra-dispersal directions. A mixture of Weibull distributions provided the best fit to the inter-event period data for the 123 events. Depending on which date is accepted for the last event, the mixture-of-Weibulls model probability is at least 0.37–0.48 for a new eruption from Mt Taranaki in the next 50 years. A polymodal distribution of inter-event periods indicates that a range of nested processes control eruption recurrence at this type of arc volcano. These could possibly be related by further statistical analysis to intrinsic factors such as step-wise processes of magma rise, assembly and storage.     

New physical characterization of the Fontana Lapilli basaltic Plinian eruption,Nicaragua

The Fontana Lapilli deposit was erupted in the late Pleistocene from a vent, or multiple vents, located near Masaya volcano (Nicaragua) and is the product of one of the largest basaltic Plinian eruptions studied so far. This eruption evolved from an initial sequence of fluctuating fountain-like events and moderately explosive pulses to a sustained Plinian episode depositing fall beds of highly vesicular basaltic-andesite scoria (SiO₂ > 53 wt%). Samples show unimodal grain size distribution and a moderate sorting that are uniform in time. The juvenile component predominates (> 96 wt%) and consists of vesicular clasts with both sub-angular and fluidal, elongated shapes. We obtain a maximum plume height of 32 km and an associated mass eruption rate of 1.4 × 10⁸ kg s⁻¹ for the Plinian phase. Estimates of erupted volume are strongly sensitive to the technique used for the calculation and to the distribution of field data. Our best estimate for the erupted volume of the majority of the climactic Plinian phase is between 2.9 and 3.8 km³ and was obtained by applying a power-law fitting technique with different integration limits. The estimated eruption duration varies between 4 and 6 h. Marine-core data confirm that the tephra thinning is better fitted by a power-law than by an exponential trend.     

Palaeotemperature determinations for the 1.8-ka Taupo ignimbrite,New Zealand,and implications for the emplacement history of a high-velocity pyroclastic flow

Palaeomagnetic data from lithic clasts collected at 46 sites within layers 1 and 2 of the 1.8-ka Taupo ignimbrite, New Zealand, have been used to determine the palaeotemperatures and thermal structure of the deposit on its emplacement. Equilibrium temperatures from sites less than 30–40 km from vent are 150–300 °C, whereas at greater distances site equilibrium temperatures increase up to 400–500 °C. This variation is seen in both layer 1 and 2 deposits, with values for layer 1 being somewhat cooler, and with its increase in temperature occurring at a greater distance from vent. A temperature maximum at ~50 km from vent coincides with a zone of pink thermal-oxidation colouration of pumices previously inferred to reflect higher emplacement temperatures. Additional palaeomagnetic data collected by us and others from pumice clasts show comparable temperature variations, but these temperature estimates are shown here to be due to a chemical remanence and unreliable for accurate temperature estimates. Cooler temperatures in proximal parts of the ignimbrite are consistent with admixture of >20% cold lithic clasts at source and interaction with the pre-eruption Lake Taupo. The similar, but offset, increases in equilibrium temperatures for medial and distal layers 1 and 2 are consistent with both layers being deposited from the same flow. However, any proximal deposits left by the later, hotter material must have been subsequently eroded, or be so thin that our collection failed to sample them. Radial asymmetries in equilibrium temperatures as well as other physical parameters suggest that the deposit emplacement temperature is primarily determined at source, rather than by interaction with air during transport. These data support previous interpretations that a concentrated basal flow played a dominant role in emplacement and deposition of the Taupo ignimbrite.Editorial responsibility: T. Druitt     

Sequence and eruptive style of the 1783 eruption of Asama Volcano, central Japan: a case study of an andesitic explosive eruption generating fountain-fed lava flow, pumice fall, scoria flow and forming a cone

The 3-month long eruption of Asama volcano in 1783 produced andesitic pumice falls, pyroclastic flows, lava flows, and constructed a cone. It is divided into six episodes on the basis of waxing and waning inferred from records made during the eruption. Episodes 1 to 4 were intermittent Vulcanian or Plinian eruptions, which generated several pumice fall deposits. The frequency and intensity of the eruption increased dramatically in episode 5, which started on 2 August, and culminated in a final phase that began on the night of 4 August, lasting for 15 h. This climactic phase is further divided into two subphases. The first subphase is characterized by generation of a pumice fall, whereas the second one is characterized by abundant pyroclastic flows. Stratigraphic relationships suggest that rapid growth of a cone and the generation of lava flows occurred simultaneously with the generation of both pumice falls and pyroclastic flows. The volumes of the ejecta during the first and second subphases are 0.21 km³ (DRE) and 0.27 km³ (DRE), respectively. The proportions of the different eruptive products are lava: cone: pumice fall=84:11:5 in the first subphase and lava: cone: pyroclastic flow=42:2:56 in the second subphase. The lava flows in this eruption consist of three flow units (L1, L2, and L3) and they characteristically possess abundant broken phenocrysts, and show extensive "welding" texture. These features, as well as ghost pyroclastic textures on the surface, indicate that the lava was a fountain-fed clastogenic lava. A high discharge rate for the lava flow (up to 10⁶ kg/s) may also suggest that the lava was initially explosively ejected from the conduit. The petrology of the juvenile materials indicates binary mixing of an andesitic magma and a crystal-rich dacitic magma. The mixing ratio changed with time; the dacitic component is dominant in the pyroclasts of the first subphase of the climactic phase, while the proportion of the andesitic component increases in the pyroclasts of the second subphase. The compositions of the lava flows vary from one flow unit to another; L1 and L3 have almost identical compositions to those of pyroclasts of the first and second subphases, respectively, while L2 has an intermediate composition, suggesting that the pyroclasts of the first and second subphases were the source of the lava flows, and were partly homogenized during flow. The complex features of this eruption can be explained by rapid deposition of coarse pyroclasts near the vent and the subsequent flowage of clastogenic lavas which were accompanied by a high eruption plume generating pumice falls and/or pyroclastic flows.Editorial responsibility: T. Druitt     

Seismicity in the Rotorua and Kawerau geothermal systems,Taupo Volcanic Zone,New Zealand,based on improved velocity models and cross-correlation measurements

We analyze earthquakes occurring in and around the Rotorua and Kawerau geothermal systems, Taupo Volcanic Zone, New Zealand. The two data sets contain 504 and 1875 shallow (≤ 20 km deep) earthquakes, respectively, and span the 21 year period between 1984 and 2004. The arrival time data for these earthquakes are first used to calculate 1-D P- and S-wave seismic velocity models and accompanying station correction terms for both areas. In order to address the non-uniqueness of the joint hypocenter-velocity model estimation problem, we analyze suites of 1000 velocity models computed from random initial models. The final velocity models are well constrained, particularly at depths between 4 and 15 km, and consistent with the results obtained in previous seismic refraction studies of the central Taupo Volcanic Zone. Using a combination of cross-correlation-derived and catalog-based arrival times, we relocate subsets of the Rotorua and Kawerau data sets. In Rotorua, the relocated earthquakes cluster near the geothermally active parts of Rotorua City and beneath the Mount Ngongotaha rhyolite dome. Earthquake clusters and alignments reveal seismogenic structures in the mid-crust whose positions and geometries are consistent with previously published fault mechanisms and known near-surface faults. In Kawerau, the earthquakes within the geothermal field align along northeast-trending lineations, consistent with the predominant alignment of surface-mapped faults in the area.     

The 10 ka multiple vent pyroclastic eruption sequence at Tongariro Volcanic Centre, Taupo Volcanic Zone, New Zealand: Part 2. Petrological insights into magma storage and transport during regional extension

The six eruption episodes of the 10 ka Pahoka–Mangamate (PM) sequence (see companion paper) occurred over a ?200–400-year period from a 15-km-long zone of multiple vents within the Tongariro Volcanic Centre (TgVC), located at the southern end of the Taupo Volcanic Zone (TVZ). Most TgVC eruptives are plagioclase-dominant pyroxene andesites and dacites, with strongly porphyritic textures indicating their derivation from magmas that ascended slowly and stagnated at shallow depths. In contrast, the PM pyroclastic eruptives show petrographic features (presence of phenocrystic and groundmass hornblende, and the coexistence of olivine and augite without plagioclase during crystallisation of phenocrysts and microphenocrysts) which suggest that their crystallisation occurred at depth. Depths exceeding 8 km are indicated for the dacitic magmas, and >20 km for the andesitic and basaltic andesitic magmas. Other petrographic features (aphyric nature, lack of reaction rims around hornblende, and the common occurrence of skeletal microphenocrystic to groundmass olivine in the andesites and basaltic andesites) suggest the PM magmas ascended rapidly immediately prior to their eruption, without any significant stagnation at shallow depths in the crust. The PM eruptives show three distinct linear trends in many oxide–oxide diagrams, suggesting geochemical division of the six episodes into three chronologically-sequential groups, early, middle and late. Disequilibrium features on a variety of scales (banded pumice, heterogeneous glassy matrix and presence of reversely zoned phenocrysts) suggest that each group contains the mixing products of two end-member magmas. Both of these end-member magmas are clearly different in each of the three groups, showing that the PM magma system was completely renewed at least three times during the eruption sequence. Minor compositional diversity within the eruptives of each group also allows the PM magmas to be distinguished in terms of their source vents. Because petrography suggests that the PM magmas did not stagnate at shallow levels during their ascent, the minor diversity in magmas from different vents indicates that magmas ascended from depth through separate conduits/dikes to erupt at different vents either simultaneously or sequentially. These unique modes of magma transport and eruption support the inferred simultaneous or sequential tapping of small separate magma bodies by regional rifting in the southern Taupo Volcanic Zone during the PM eruption sequence (see companion paper).     

The geomorphology and evolution of a large barrier spit: Farewell Spit,New Zealand

Farewell Spit is a 25 km long barrier spit that marks the end of a littoral drift system, almost 1000 km in length that runs along South Island, New Zealand. The spit is composed of barchan dunes over 20 m high, sand sheets over 1 km wide and vegetated linear dunes. Analysis of aerial photography indicates a rapid colonization of the spit by vegetation which has expanded in area by 75% since 1950. Vegetation colonization preferentially occurs on the southern side of the spit, with its northern margin characterized by barchan dunes which migrate at rates of up to 64 m/yr. Sand sourced from longshore drift appears to be the primary source of beach sediment, which is then transported into the dune field by the persistent westerly winds of the Roaring 40s. While there has been significant dune roll‐over on the surface of the spit, its overall area has remained much the same for the past 54 years. Occasional cyclone events cause erosion, but this is balanced by aeolian sediment transport. It would appear that extension of the subaerial portion of the spit is related to the development of shells banks at its downdrift end which are periodically welded to the main spit by dune extension. Farewell Spit therefore provides an ideal example of a barrier environment where longshore sediment supply and aeolian transport dominates geomorphic evolution. This differentiates the study site from other barrier environments where overwash or tidal inlet development often characterizes recent landform evolution. Copyright © 2010 John Wiley & Sons, Ltd.     

Lahars at Merapi volcano, Central Java: an overview

Merapi volcano, in Central Java, is one of the most active volcanoes in the world. At least 23 of the 61 reported eruptions since the mid-1500s have produced source deposits for lahars. The combined lahar deposits cover about 286 km² on the flanks and the surrounding piedmonts of the volcano. At Merapi, lahars are commonly rain-triggered by rainfalls having an average intensity of about 40 mm in 2 h. Most occur during the rainy season from November to April, and have average velocities of 5–7 m/s at 1000 m in elevation. A wide range of facies may be generated from a single flow, which may transform downvalley from debris flow to hyperconcentrated streamflow.Because of the high frequency and magnitude of the lahar events, lahar-related hazards are high below about 450–600 m elevation in each of the 13 rivers which drain the volcano. Hazard-zone maps for lahar were produced by Pardyanto et al. (Volcanic hazard map, Merapi volcano, Central Java (1/100,000). Geol. Surv. of Indonesia, Bandung, II, 4, 1978) and the Japanese–Indonesian Cooperation Agency (Master plan for land conservation and volcanic debris control in the area of Mt Merapi, Jakarta, 1980), but these maps are of a very small scale to meet modern zoning requirements. More recently, a few large-scale maps (1/10,000- and 1/2000-scale) and risk assessments have been completed for a few critical river systems.     

The Sarikavak Tephra, Galatea, north central Turkey: a case study of a Miocene complex plinian eruption deposit

The Sarikavak Tephra from the central Galatean Volcanic Province (Turkey) represents the deposit of a complex multiple phase plinian eruption of Miocene age. The eruptive sequence is subdivided into the Lower-, Middle-, and Upper Sarikavak Tephra (LSKT, MSKT, USKT) which differ in type of deposits, lithology and eruptive mechanisms.The Lower Sarikavak Tephra is characterised by pumice fall deposits with minor interbedded fine-grained ash beds in the lower LSKT-A. Deposits are well stratified and enriched in lithic fragments up to >50 wt% in some layers. The upper LSKT-B is mainly reversely graded pumice fall with minor amounts of lithics. It represents the main plinian phase of the eruption. The LSKT-A and B units are separated from each other by a fine-grained ash fall deposit. The Middle Sarikavak Tephra is predominantly composed of cross-bedded ash-and-pumice surge deposits with minor pumice fall deposits in the lower MSKT-A and major pyroclastic flow deposits in the upper MSKT-B unit. The Upper Sarikavak Tephra shows subaerial laminated surge deposits in USKT-A and subaqueous tephra beds in USKT-B.Isopach maps of the LSKT pumice fall deposits as well as the fine ash at the LSKT-A/B boundary indicate NNE–SSW extending depositional fans with the source area in the western part of the Ovaçik caldera. The MSKT pyroclastic flow and surge deposits form a SW-extending main lobe related to paleotopography where the deposits are thickest.Internal bedding and lithic distribution of the LSKT-A result from intermittent activity due to significant vent wall instabilities. Reductions in eruption power from (partial) plugging of the vent produced fine ash deposits in near-vent locations and subsequent explosive expulsion of wall rock debris was responsible for the high lithic contents of the lapilli fall deposits. A period of vent closure promoted fine ash fall deposition at the end of LSKT-A. The subsequent main plinian phase of the LSKT-B evolved from stable vent conditions after some initial gravitational column collapses during the early ascent of the re-established eruption plume. The ash-and-pumice surges of the MSKT-A are interpreted as deposits from phreatomagmatic activity prior to the main pyroclastic flow formation of the MSKT-B.     

Timing of volcanic, plutonic and geothermal activity at Ngatamariki, New Zealand

Four ⁴⁰Ar/³⁹Ar dates on mineral separates from fresh and hydrothermally altered volcanic and plutonic rocks from the Ngatamariki geothermal field indicate that andesitic volcanism took place in the eastern portion of the Taupo Volcanic Zone (TVZ) prior to 1.2 Ma and probably considerably earlier. These data significantly extend the onset and duration of andesitic volcanism in the east-central TVZ over previous estimates. Intrusive activity is represented at Ngatamariki by a dioritic pluton, the only such pluton yet recognized in the entire TVZ. Hornblende from the pluton yields a crystallization age of near 550 ka. Hydrothermal alteration spatially associated with the pluton produced sericite of a similar age. Overlying and postdating the most intense hydrothermal alteration zone is the Whakamaru Ignimbrite (or its equivalent) which was emplaced at 330 ka. Two distinct geothermal systems may have been active at nearly the same site from 550 ka to present. The most intense activity occurred before 330 ka and was associated with emplacement of the Ngatamariki diorite. This was followed by the less intense system that is currently active. The geothermal regime at Ngatamariki has, therefore, probably been active intermittently for at least 550 ka.     

Flow and deposition of pyroclastic granular flows: A type example from the 1975 Ngauruhoe eruption,New Zealand

Small-volume pyroclastic density currents (PDCs) are generated frequently during explosive eruptions with little warning. Assessing their hazard requires a physical understanding of their transport and sedimentation processes which is best achieved by the testing of experimental and numerical models of geophysical mass flows against natural flows and/or deposits. To this end we report on one of the most detailed sedimentological studies ever carried out on a series of pristine small-volume PDC deposits from the 1975 eruption of Ngauruhoe volcano, whose emplacement were also witnessed during eruption. Using high-resolution GPS surveys, a series of lateral excavations across the deposits, and bulk sedimentological analysis we constrained the geomorphology, internal structure and texture of the deposits with respect to laterally varying modes of deposition.     

Deformation processes in the shallow levels of an accretionary prism: The Mesozoic Torlesse Terrane, South Island, New Zealand

Abstract The deformation style of the Torlesse Terrane along the southern Kaikoura coast, South Island, New Zealand, records shallow level deformation processes within an accretionary prism during the Early Cretaceous. The beds exhibit complicated structural features resulting from multistage deformations in a lithological unit, that were intimately related with the dewatering and lithification of terrigenous sediments. The earliest phase of deformation throughout the transect studied was the development of pinch-and-swell structures and boudinage fabrics due to layer-parallel extension while the beds were poorly consolidated. This was followed locally by mesoscopic tight to close recumbent folding. The beds are cut locally by two phases of mudstone intrusions. The earlier phase was initiated by 'in situ' fluidization of mudstone layers, whereas the later phase represented intrusion of siliceous claystone probably derived from an overpressured decollement. Minor faults at high-angles to bedding by layer-normal shortening then disrupted the beds throughout the transect. The deformation was followed by formation of meso- and macroscopic scale open to gentle folds by layer-parallel shortening. Kilometer-scale differential stratal rotations were produced during the final main tectonic phase that occurred in association with post-accretion Neogene regional disturbance.     

Tilting of active folds and drainage asymmetry on the Manawatu anticlines,New Zealand: a preliminary investigation

The apparent southward tilting of five anticlines in the Manawatu, North Island, New Zealand, is investigated using two drainage basin analysis techniques: the transverse topographic symmetry factor (T) and the asymmetry factor (AF). The techniques are used to determine whether westward‐flowing trunk streams on the gentle western limbs of five anticlines are migrating southwards across their drainage basins, concomitant with down‐tilting of the fold axes. While results show potential for the techniques to be applied in such a tectonic setting, our findings are inconclusive. This could be due to the incipient nature of the folds (c. 0·5 Ma in age), and it would seem more appropriate to apply the techniques in concert with detailed field analyses of river migration patterns. Copyright © 2008 John Wiley & Sons, Ltd.     

The Role of Fluvial and Glacial Erosion in Landscape Evolution: The Ben Ohau Range,New Zealand

A morphometric comparison of valleys has been made for the Ben Ohau Range in the central Southern Alps of New Zealand. The range is undergoing rapid tectonic transport and uplift. The humid north of the range is a glacial trough-and-arête landscape, with a temperate glacial climate. The dry south has rounded divides and plateau remnants dissected by fluvial valleys. Assuming that space–time substitution allows today's spatial valley-form transition to represent evolutionary stages in valley development, the tectonic history allows time constraints to be placed on the rate of transition to an alpine glacial landscape. Morphometric change has been quantified using hypsometric curves, and distance–elevation plots of cirque and valley-floor altitudes. Ancestral fluvial valleys have less concave long profiles but are stepped at altitude owing to the presence of high-level cirques and remnant plateau surfaces, and possess a low proportion of land area at low elevation. Increasing glacial influence is manifest as smoother, more deeply concave long profiles and U-shaped cross-profiles associated with a higher proportion of the land area at lower elevation. The full morphological transition has involved up to 2.4 km of vertical denudation over the 4 Ma lifetime of the mountain range, of which 80 per cent would have occurred by preglacial fluvial erosion. Combining the trajectory of tectonic transport with reconstructed glaciation limits and climatic history, it is indicated that about 200 ka of temperate glacial erosion produces recognizable trough-and areête topography. Mean and modal relief increase where glacial activity is confined to cirques, but decrease when trough incision by ice becomes established as a dominant process in the landscape. © 1997 by John Wiley & Sons, Ltd.     

Large landslides and their effect on sediment flux in South Westland,New Zealand

Landslides and runoff are dominant erosional agents in the tectonically active alpine South Westland area of New Zealand, characterized by high uplift rates and extreme orographic precipitation. Despite a high density of shallow debris slides and flows, the geomorphic imprints of deep‐seated bedrock failures are dominant and persistent. Over 50 large (>1 km²) landslides comprising rock slide[sol ]avalanches, complex rotational and rock‐block slides, wedge failures, and deep‐seated gravitational slope deformation were detected on air photos and shaded‐relief images. Major long‐term impacts on alpine rivers include (1) forced alluviation upstream of landslide dams, (2) occlusion of gorges and triggering of secondary riparian landslides, and (3) diversion of channels around deposits to form incised meandering gorges. Remnants of large prehistoric (i.e. pre‐1840) landslide deposits possibly represent the low‐frequency (in terms of total area affected yet dominant) end of the spectrum of mass wasting in the western Southern Alps. This is at odds with high erosion rates in an active erosional landscape. Large landslides appear to have dual roles of supplying and retaining sediment. The implications of these roles are that (1) previous models of (shallow) landslide‐derived sediment flux need to be recalibrated, and (2) geomorphic effects of earthquake‐induced landsliding may persist for at least 10² years. Copyright © 2005 John Wiley & Sons, Ltd.