Gold mining related mercury contamination in Tongguan,Shaanxi Province,PR China

Elemental Hg–Au amalgamation mining practices are used widely in many developing countries resulting in significant Hg contamination of surrounding ecosystems. The authors examined for the first time Hg contamination in air, water, sediment, soil and crops in the Tongguan Au mining area, China, where elemental Hg has been used to extract Au for many years. Total gaseous Hg (TGM) concentrations in ambient air in the Tongguan area were significantly elevated compared to regional background concentrations. The average TGM concentrations in ambient air in a Au mill reached 18,000 ng m⁻³, which exceeds the maximum allowable occupational standard for TGM of 10,000 ng m⁻³ in China. Both total and methyl-Hg concentrations in stream water, stream sediment, and soil samples collected in the Tongguan area were elevated compared to methyl-Hg reported in artisanal Au mining areas in Suriname and the Amazon River basin. Total Hg concentrations in vegetable and wheat samples ranged from 42 to 640 μg kg⁻¹, all of which significantly exceed the Chinese guidance limit for vegetables (10 μg kg⁻¹) and foodstuffs other than fish (20 μg kg⁻¹). Fortunately, methyl-Hg was not significantly accumulated in the crops sampled in this study, where concentrations varied from 0.2 to 7.7 μg kg⁻¹.     

Mercury and methylmercury in riparian soil,sediments, mine-waste calcines,and moss from abandoned Hg mines in east Guizhou province,southwestern China

Concentrations of total Hg and methylmercury (MMHg) in riparian soil, mine-waste calcine, sediment, and moss samples collected from abandoned Hg mines in Wanshan district, Guizhou province, China, were measured to show regional dispersion of Hg-contamination. High total Hg and MMHg concentrations obtained in riparian soils from mined areas, ranged from 5.1 to 790 mg kg⁻¹ and 0.13 to 15 ng g⁻¹, respectively. However, total Hg and MMHg concentrations in the soils collected from control sites were significantly lower varying from 0.1 to 1.2 mg kg⁻¹ and 0.10 to 1.6 ng g⁻¹, respectively. Total Hg and MMHg concentrations in sediments varied from 90 to 930 mg kg⁻¹ and 3.0 to 20 ng g⁻¹, respectively. Total Hg concentrations in mine-waste calcines were highly elevated ranging from 5.7 to 4400 mg kg⁻¹, but MMHg concentrations were generally low ranging from 0.17 to 1.1 ng g⁻¹. Similar to the high Hg concentrations in soil and sediments, moss samples collected from rocks ranged from 1.0 to 95 mg kg⁻¹ in total Hg and from 0.21 to 20 ng g⁻¹ in MMHg. Elevated Hg concentrations in mosses suggest that atmospheric deposition might be an important pathway of Hg to the local terrestrial system. Moreover, the spatial distribution patterns of Hg contamination in the local environment suggest derivation from historic Hg mining sites in the Wanshan area.     

High cadmium concentration in soil in the Three Gorges region: Geogenic source and potential bioavailability

This study investigated the distribution and sources of Cd in soils from a Cd-rich area in the Three Gorges region, China. The results showed that in the study area arable soils contain 0.42–42 mg kg⁻¹ Cd with 0.12–8.5 mg kg⁻¹ in the natural soils, corresponding to high amounts of Cd (0.22–42 mg kg⁻¹) in outcropping sedimentary rocks in the area. Both lognormal distribution and enrichment factor (EF) plots were applied in an attempt to distinguish between geogenic and anthropogenic origins of Cd in the local soils. The lognormal distribution plots illustrated that geogenic sources dominated in soils with low and moderate Cd concentrations (<8.5 mg kg⁻¹), whereas anthropogenic sources (agricultural activities, coal mining) significantly elevated Cd contents in some arable soils (>8.5 mg kg⁻¹). The enrichment factor plots illustrated that the majority of the soil samples had EF values of <5, pointing to a geogenic origin of Cd in the soils, whereas some arable soils had EF values >5, pointing to an additional anthropogenic input of Cd to the soils. Sequential extraction results showed that Cd soluble in water and weak acid (water-soluble, exchangeable and carbonate fraction of the soil) accounts for an average of 31% of the total soil Cd, which indicates high potential for Cd mobility and bioavailability. The findings point to a potential health risk from Cd in areas with high geogenic background concentrations of this metal.     

Total concentration,speciation and mobility of potentially toxic elements in soils around a mining area in central Iran

The current study was designed to investigate the extent and severity of contamination as well as the fractionation of potentially toxic elements (As, Cd, Cr, Cu, Pb, Zn, Ni) in minesoils and agricultural soils around a Pb–Zn mine in central Iran. For this purpose, 20 agricultural soils and eight minesoils were geochemically characterized. Results showed that minesoils contained elevated concentrations of As (12.9–254 mg kg⁻¹), Cd (1.2–55.1 mg kg⁻¹), Pb (137–6239 mg kg⁻¹) and Zn (516–48,889 mg kg⁻¹). The agricultural soils were also polluted by As (5.5–57.1 mg kg⁻¹), Cd (0.2–8.5 mg kg⁻¹), Pb (22–3451 mg kg⁻¹) and Zn (94–9907 mg kg⁻¹). The highest recorded concentrations for these elements were in soils influenced directly by tailing ponds. Chromium, Cu and Ni content in agricultural soils (with average value of 74.1, 34.6 and 50.7 mg kg⁻¹, respectively) were slightly higher than the minesoils (with average value of 54.5, 33.1 and 43.4 mg kg⁻¹, respectively). Sequential extraction data indicated that there were some differences between the speciation of PTEs in soil samples. In the agricultural soils, Zn and Cd were mainly associated with carbonate bound fraction, As and Pb with reducible fraction, Cu with oxidisable fraction and Cr and Ni with residual phase. With respect to mobility factor values, Zn and Cd in the agricultural soils have been found to be the most mobile while As mobility is negligible. Also, the mobility factor of As, Cd and Pb in agricultural soils adjoining tailing ponds was high. In minesoil sample Cd was most abundant in the carbonate form, whereas other studied elements were mainly present in the reducible and residual fractions; therefore, despite the high total concentrations of As, Pb and Zn in the minesoils, the environmental risk of these elements was low. Based on the obtained data, a portion of Cu, Cr and Ni input was from agricultural activities.     

Evolution of groundwater chemistry in and around Vaniyambadi Industrial Area: Differentiating the natural and anthropogenic sources of contamination

Groundwaters in the crystalline aquifers are the major source of drinking water in Vaniyambadi area of Vellore district. Geochemical methods in collaboration with statistical methods were applied in this industrial area to understand the natural and anthropogenic influences on groundwater quality. To accomplish this objective, groundwater samples were collected and analyzed for physicochemical parameters and the results showed a dominance in the order of Na⁺ > Mg²⁺ > Ca²⁺ > K⁺ and HCO₃⁻ > Cl⁻ > SO₄²⁻ > NO₃⁻ for anions and cations, respectively. In contrast to this anion dominance were changed to Cl⁻ > HCO₃⁻ > SO₄²⁻ > NO₃⁻ in samples collected near the tannery industries. Groundwater quality evaluation using TDS and TH suggested that 57% of the total samples are hard-brackish type, indicating its unsuitability for drinking purpose. Generally the water type is Na⁺Cl⁻ to Ca²⁺Mg²⁺HCO₃⁻ type with an intermediate Ca²⁺Mg²⁺Cl⁻, suggesting the mixing of fresh groundwater with tannery effluent and cation exchange. Factor analysis and bivariate plots of major ions suggests that both natural and anthropogenic inputs are equally influencing the groundwater quality. Further investigations proved that silicate weathering is the dominant geogenic source of groundwater solute content, whereas tannery effluent is the anthropogenic source. Saline water mixing index (SWMI) and Cl⁻ vs NO₃⁻ bivariate plot were employed to differentiate the tannery contamination from the other anthropogenic inputs such as agricultural fertilizers, municipal sewages, etc. This analysis shows that samples 2, 4, 8 and 9 (located within the tannery cluster) have a SWMI value greater than 1, representing the groundwater–tannery effluent mixing. This study infers that groundwater in the Vaniyambadi area is under serious threat from both natural and anthropogenic contamination. However, the controlling discharge of untreated tannery effluents must be regulated to reduce the further deterioration of this vital resource in this part of the country.     

Environmental assessment of abandoned mine tailings in Adak,Västerbotten district (northern Sweden)

Sulfide-rich mine tailings in Adak that are exposed to weathering cause acid mine drainage characterized by low pH (2–4) and high SO₄ (up to 800 mg L⁻¹). Surface water, sediment and soil samples collected in this study contain higher concentrations of As, Cu, Fe and Zn, compared to the target and/or intervention limits set by international regulatory agencies. In particular, high As concentrations in water (up to 2900 μg L⁻¹) and sediment (up to 900 mg kg⁻¹) are of concern. There is large variability in trace element concentrations, implying that both physical (grain size) and chemical factors (pH, secondary phases as sulfides, Al-oxides or clay minerals) play an important role in their distribution. The low pH keeps the trace elements dissolved, and they are transported farther downstream. Trace element partition coefficients are low (log K_d = 0.3–4.3), and saturation indices calculated with PHREEQC are <0 for common oxide and sulfidic minerals. The sediment and soil samples indicate an enhanced pollution index (up to 17), and high enrichment factors for trace elements (As up to 38,300; Zn up to 800). Finally, leaves collected from different plant types indicate bioaccumulation of several elements (As, Al, Cu, Fe and Zn). However, some of the plants growing in this area (e.g., Salix, Equisétum) are generally resistant to metal toxicity, and hence, liming and phytoremediation could be considered as potential on-site remediation methods.     

Assessing soil erosion and control factors by radiometric technique in the source region of the Yellow River,Tibetan Plateau

Measurements of ¹³⁷Cs concentration in soils were made in a representative catchment to quantify erosion rates and identify the main factors involved in the erosion in the source region of the Yellow River in the Tibetan Plateau. In order to estimate erosion rates in terms of the main factors affecting soil loss, samples were collected taking into account the slope and vegetation cover along six selected transects within the Dari County catchment. The reference inventory for the area was established at a stable, well-preserved, site of small thickness (value of 2324 Bq·m^− 2). All the sampling sites had been eroded and ¹³⁷Cs inventories varied widely in the topsoil (14.87–25.56 Bq·kg^− 1). The effective soil loss values were also highly variable (11.03–28.35 t·km^− 1·yr^− 1) in line with the vegetation cover change. The radiometric approach was useful in quantifying soil erosion rates and examining patterns of soil movement.     

The dissolution of olivine added to soil: Implications for enhanced weathering

Chemical weathering of silicate minerals consumes atmospheric CO₂ and is a fundamental component of geochemical cycles and of the climate system on long timescales. Artificial acceleration of such weathering (“enhanced weathering”) has recently been proposed as a method of mitigating anthropogenic climate change, by adding fine-grained silicate materials to continental surfaces. The efficacy of such intervention in the carbon cycle strongly depends on the mineral dissolution rates that occur, but these rates remain uncertain. Dissolution rates determined from catchment scale investigations are generally several orders of magnitude slower than those predicted from kinetic information derived from laboratory studies. Here we present results from laboratory flow-through dissolution experiments which seek to bridge this observational discrepancy by using columns of soil returned to the laboratory from a field site. We constrain the dissolution rate of olivine added to the top of one of these columns, while maintaining much of the complexity inherent in the soil environment. Continual addition of water to the top of the soil columns, and analysis of elemental composition of waters exiting at the base was conducted for a period of five months, and the solid and leachable composition of the soils was also assessed before and after the experiments. Chemical results indicate clear release of Mg²⁺ from the dissolution of olivine and, by comparison with a control case, allow the rate of olivine dissolution to be estimated between 10^−16.4 and 10^−15.5 moles(Mg) cm⁻² s⁻¹. Measurements also allow secondary mineral formation in the soil to be assessed, and suggest that no significant secondary uptake of Mg²⁺ has occurred. The olivine dissolution rates are intermediate between those of pure laboratory and field studies and provide a useful constraint on weathering processes in natural environments, such as during soil profile deepening or the addition of mineral dust or volcanic ash to soils surfaces. The dissolution rates also provide critical information for the assessment of enhanced weathering including the expected surface-area and energy requirements.     

Use of Sr isotopes as a tool to decipher the soil weathering processes in a tropical river catchment,southwestern India

River water composition (major ion and ⁸⁷Sr/⁸⁶Sr ratio) was monitored on a monthly basis over a period of three years from a mountainous river (Nethravati River) of southwestern India. The total dissolved solid (TDS) concentration is relatively low (46 mg L⁻¹) with silica being the dominant contributor. The basin is characterised by lower dissolved Sr concentration (avg. 150 nmol L⁻¹), with radiogenic ⁸⁷Sr/⁸⁶Sr isotopic ratios (avg. 0.72041 at outlet). The composition of Sr and ⁸⁷Sr/⁸⁶Sr and their correlation with silicate derived cations in the river basin reveal that their dominant source is from the radiogenic silicate rock minerals. Their composition in the stream is controlled by a combination of physical and chemical weathering occurring in the basin. The molar ratio of SiO₂/Ca and ⁸⁷Sr/⁸⁶Sr isotopic ratio show strong seasonal variation in the river water, i.e., low SiO₂/Ca ratio with radiogenic isotopes during non-monsoon and higher SiO₂/Ca with less radiogenic isotopes during monsoon season. Whereas, the seasonal variation of Rb/Sr ratio in the stream water is not significant suggesting that change in the mineral phase being involved in the weathering reaction could be unlikely for the observed molar SiO₂/Ca and ⁸⁷Sr/⁸⁶Sr isotope variation in river water. Therefore, the shift in the stream water chemical composition could be attributed to contribution of ground water which is in contact with the bedrock (weathering front) during non-monsoon and weathering of secondary soil minerals in the regolith layer during monsoon. The secondary soil mineral weathering leads to limited silicate cation and enhanced silica fluxes in the Nethravati river basin.     

The relationship between fluid flow and mineral weathering in heterogeneous unsaturated porous media: A physical and geochemical characterization of a waste-rock pile

The relationships between factors that control subsurface flow and the timing, duration, and intensity of acidity generation and leaching of metals from waste-rock dumps are investigated. A 12 m high waste-rock pile that had been constructed in 1994 at Key Lake, Saskatchewan, Canada was disassembled, sampled and characterized in 2000. Physical properties that control water flow were characterized by measuring soil–water suction, volumetric water content, and the grain-size distribution at 60 randomized sites within the pile. Grain-size distribution was also measured at an additional 20 grid locations within the pile. Paste pH, pore-water geochemistry, mineralogy, and water-soluble extractions were used to investigate geochemical processes and sulfide oxidation at each of the 20 grid locations. A field-based soil–water characteristic curve could not be developed from the spatially variable and hysteretic field data; consequently, the grain-size distribution was used as a relative measure of subsurface flow and of the tendency to contain water under unsaturated conditions. The geochemical characterization demonstrated that marcasite underwent preferential weathering relative to pyrite and chalcopyrite, that dolomite was the main buffering carbonate mineral, and that gypsum, jarosite, and Fe oxyhydroxides were the main secondary (supergene) minerals. The pore waters contained up to 78,000 mg L⁻¹ SO₄, 690 mg L⁻¹ Ni and 1400 mg L⁻¹ U (800, 11.7 and 6 mM, respectively), suggesting that significant weathering had occurred. The pore water chemistry varied considerably between sampling sites. However, neither a correlation of pore-water chemistry with grain-size distribution nor a spatial relationship within the sampled grid was discernible.     

Mercury in the Lot–Garonne River system (France): Sources,fluxes and anthropogenic component

Dissolved and particulate Hg fluxes in the Lot–Garonne–Gironde fluvial-estuarine system were obtained from observation of daily discharge and suspended particulate matter (SPM) concentrations. In addition to the measurements of the total dissolved (<0.45 μm) and particulate Hg (>0.45 μm), called HgT_D and HgT_P respectively, the dissolved inorganic Hg species (HgR_D) were determined monthly. Geochemical background values for HgT_P in sediments and SPM were similar to crustal values and to typical concentrations in SPM of non-contaminated river systems, respectively. The Riou Mort watershed already known as the origin of important historical polymetallic (e.g., Cd, Zn) pollution was identified as an important Hg point source. In the downstream Lot River, Hg concentrations were clearly higher than those in other moderately contaminated systems. The mean relative contribution of HgR_D to HgT_D in the Lot River and in the Garonne River was close to 25% and 50%, respectively, and showed no correlation with water discharge or SPM concentration. Depending on the origin and nature of SPM, HgT_P concentrations were correlated or not with particulate organic C (POC). Maximum HgT_P concentrations were measured in samples containing low POC concentrations and were attributed to sediment resuspension. In contrast, high POC concentrations (6–17%) during algal blooms were associated with low/moderate HgT_P concentrations (<0.5 mg kg⁻¹) at different sites, suggesting that Hg concentrations in fluvial phytoplankton may be limited by bioavailability of dissolved Hg and/or physiologically controlled Hg accumulation. Mercury was mostly (up to 98%) transported in the particulate phase with estimated annual Hg fluxes at the outlet of the Lot River system ranging from 35 to 530 kg a⁻¹ for the past decade. The minimum anthropogenic component (58–84% of total Hg fluxes) could not be explained by present Riou Mort point source contributions, suggesting important Hg release from contaminated sediment as a major source and from downstream point sources (e.g., coal-fired power plants and/or metal processing industries). HgT_P concentrations and fluxes were strongly related to hydrologic variations and were clearly increased by riverbed dredging during lock construction. Therefore, the estimated Hg stocks in the Lot River sediment (5–13 tons) represent an important potential Hg source for the downstream fluvial-estuarine system.     

Mercury in European agricultural and grazing land soils

Agricultural (Ap, A_p-horizon, 0–20 cm) and grazing land soil samples (Gr, 0–10 cm) were collected from a large part of Europe (33 countries, 5.6 million km²) at an average density of 1 sample site/2500 km². The resulting more than 2 × 2000 soil samples were air dried, sieved to <2 mm and analysed for their Hg concentrations following an aqua regia extraction. Median concentrations for Hg are 0.030 mg/kg (range: <0.003–1.56 mg/kg) for the Ap samples and 0.035 mg/kg (range: <0.003–3.12 mg/kg) for the Gr samples. Only 5 Ap and 10 Gr samples returned Hg concentrations above 1 mg/kg. In the geochemical maps the continental-scale distribution of the element is clearly dominated by geology. Climate exerts an important influence. Mercury accumulates in those areas of northern Europe where a wet and cold climate favours the build-up of soil organic material. Typical anthropogenic sources like coal-fired power plants, waste incinerators, chlor-alkali plants, metal smelters and urban agglomerations are hardly visible at continental scales but can have a major impact at the local-scale.     

The use of vetiver grass (Vetiveria zizanioides) in the phytoremediation of soils contaminated with heavy metals

Recent research has shown that phytoextraction approaches often require soil amendments, such as the application of EDTA, to increase the bioavailability of heavy metals in soils. However, EDTA and EDTA–heavy metal complexes can be toxic to plants and soil microorganisms and may leach into groundwater, causing further environmental pollution. In the present study, vetiver grass (Vetiveria zizanioides) was studied for its potential use in the phytoremediation of soils contaminated with heavy metals. In the pot experiment, the uptake and transport of Pb by vetiver from Pb-contaminated soils under EDTA application was investigated. The results showed that vetiver had the capacity to tolerate high Pb concentrations in soils. With the application of EDTA, the translocation ratio of Pb from vetiver roots to shoots was significantly increased. On the 14th day after 5.0 mmol EDTA kg⁻¹ of soil application, the shoot Pb concentration reached 42, 160, 243 mg kg⁻¹ DW and the root Pb concentrations were 266, 951, and 2280 mg kg⁻¹ DW in the 500, 2500 and 5000 mg Pb kg⁻¹ soils, respectively. In the short soil leaching column (9.0-cm diameter, 20-cm height) experiment, about 3.7%, 15.6%, 14.3% and 22.2% of the soil Pb, Cu, Zn and Cd were leached from the artificially contaminated soil profile after 5.0 mmol EDTA kg⁻¹ of soil application and nearly 126 mm of rainfall irrigation. In the long soil leaching experiment, soil columns (9.0-cm diameter, 60-cm height) were packed with uncontaminated soils (mimicking the subsoil under contaminated upper layers) and planted with vetiver. Heavy metal leachate from the short column experiment was applied to the surface of the long soil column, the artificial rainwater was percolated, and the final leachate was collected at the bottom of the soil columns. The results showed that soil matrix with planted vetiver, could re-adsorb 98%, 54%, 41%, and 88% of the initially applied Pb, Cu, Zn, and Cd, respectively, which may reduce the risk of heavy metals flowing downwards and entering the groundwater.     

Radon emanation of heterogeneous basin deposits in Kathmandu Valley,Nepal

Effective radium-226 concentration (EC_Ra) has been measured in soil samples from seven horizontal and vertical profiles of terrace scarps in the northern part of Kathmandu Valley, Nepal. The samples belong to the Thimi, Gokarna, and Tokha Formations, dated from 50 to 14 ky BP, and represent a diverse fluvio-deltaic sedimentary facies mainly consisting of gravelly to coarse sands, black, orange and brown clays. EC_Ra was measured in the laboratory by radon-222 emanation. The samples (n = 177) are placed in air-tight glass containers, from which, after an accumulation time varying from 3 to 18 days, the concentration of radon-222, radioactive decay product of radium-226 and radioactive gas with a half-life of 3.8 days, is measured using scintillation flasks. The EC_Ra values from the seven different profiles of the terrace deposits vary from 0.4 to 43 Bq kg^?1, with profile averages ranging from 12 ± 1 to 27 ± 2 Bq kg^?1. The values have a remarkable consistency along a particular horizon of sediment layers, clearly demonstrating that these values can be used for long distance correlations of the sediment horizons. Widely separated sediment profiles, representing similar stratigraphic positions, exhibit consistent EC_Ra values in corresponding stratigraphic sediment layers. EC_Ra measurements therefore appear particularly useful for lithologic and stratigraphic discriminations. For comparison, EC_Ra values of soils from different localities having various sources of origin were also obtained: 9.2 ± 0.4 Bq kg^?1 in soils of Syabru–Bensi (Central Nepal), 23 ± 1 Bq kg^?1 in red residual soils of the Bhattar-Trisuli Bazar terrace (North of Kathmandu), 17.1 ± 0.3 Bq kg^?1 in red residual soils of terrace of Kalikasthan (North of Trisuli Bazar) and 10 ± 1 Bq kg^?1 in red residual soils of a site near Nagarkot (East of Kathmandu). The knowledge of EC_Ra values for these various soils is important for modelling radon exhalation at the ground surface, in particular in the vicinity of active faults. Importantly, the study also reveals that, above numerous sediments of Kathmandu Valley, radon concentration in dwellings can potentially exceed the level of 300 Bq m^?3 for residential areas; a fact that should be seriously taken into account by the governmental and non-governmental agencies as well as building authorities.     

Assessment of trace metal and rare earth elements contamination in rivers around abandoned and active mine areas. The case of Lubumbashi River and Tshamilemba Canal,Katanga, Democratic Republic of the Congo

Active and abandoned mine activities constitute the sources of deterioration of water and soil quality in many parts of the world, particularly in the African Copperbelt regions. The accumulation in soils and the release of toxic substances into the aquatic ecosystem can lead to water resources pollution and may place aquatic organisms and human health at risk. In this study, the impact of past mining activity (i.e., abandoned mine) on aquatic ecosystems has been studied using ICP-MS analysis for trace metals and Rare Earth Elements (REE) in sediment samples from Lubumbashi River (RL) and Tshamilemba Canal (CT), Katanga, Democratic Republic of the Congo (DRC). Soil samples from surrounding CT were collected to evaluate trace metal and REE concentrations and their spatial distribution. The extent of trace metal contamination compared to the background area was assessed by Enrichment Factor (EF) and Geoaccumulation Index (I_geo). Additionally, the trace metal concentrations probable effect levels (PELs) for their potential environmental impact was achieved by comparing the trace metal concentrations in the sediment/soil samples with the Sediment Quality Guidelines (SQGs). Spearman's Rank-order correlation was used to identify the source and origin of contaminants. The results highlighted high concentrations of trace metals in surface sediments of CT reaching the values of 40152, 15586, 610, 10322, 60704 and 15152 mg kg⁻¹ for Cu, Co, Zn, Pb, Fe and Mn, respectively. In the RL, the concentrations reached the values of 24093, 2046, 5463, 3340, 68290 and 769 mg kg⁻¹ for Cu, Co, Zn, Pb, Fe and Mn, respectively. The ΣREE varied from 66 to 218 and 142–331 mg kg⁻¹ for CT and RL, respectively. The soil samples are characterized by variable levels of trace metals. The EF analysis showed “extremely severe enrichment” for Cu and Co. However, no enrichment was observed for REE. Except for Mo, Th, U, Eu, Mo, Ho and Tm for which Igeo is classified as “moderately polluted and/or unpolluted”, all elements in different sites are classified in the class 6, “extremely polluted”. The trace metal concentrations in all sampling sites largely exceeded the SQGs and the PELs for the Protection of Aquatic Life recommendation. Cu and Co had positive correlation coefficient values (r = 0.741, P < 0.05, n = 14). This research presents useful tools for the evaluation of water contamination in abandoned and active mining areas.     

Effects of acid-sulfate weathering and cyanide-containing gold tailings on the transport and fate of mercury and other metals in Gossan Creek: Murray Brook mine,New Brunswick,Canada

Gossan Creek, a headwater stream in the SE Upsalquitch River watershed in New Brunswick, Canada, contains elevated concentrations of total Hg (Hg_T up to 60 μg/L). Aqueous geochemical investigations of the shallow groundwater at the headwaters of the creek confirm that the source of Hg is a contaminated groundwater plume (neutral pH with Hg and Cl concentrations up to 150 μg/L and 20 mg/L, respectively), originating from the Murray Brook mine tailings, that discharges at the headwaters of the creek. The discharge area of the contaminant plume was partially delineated based on elevated pH and Cl concentrations in the groundwater. The local groundwater outside of the plume contains much lower concentrations of Hg and Cl (<0.1 μg/L and 3.8 mg/L, respectively) and displays the chemical characteristics of an acid-sulfate weathering system, with low pH (4.1–5.5) and elevated concentrations of Cu, Zn, Pb and SO₄ (up to 5400 μg Cu/L, 8700 μg Zn/L, 70 μg Pb/L and 330 mg SO₄/L), derived from oxidation of sulfide minerals in the Murray Brook volcanogenic massive sulfide deposit and surrounding bedrock. The Hg_T mass loads measured at various hydrologic control points along the stream system indicate that 95–99% of the dissolved Hg_T is attenuated in the first 3–4 km from the source. Analyses of creek bed sediments for Au, Ag, Cu, Zn, Pb and Hg indicate that these metals have partitioned strongly to the sediments. Mineralogical investigations of the contaminated sediments using analytical scanning electron microscopy (SEM), transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM), reveal discrete particles (<1–2 μm) of metacinnabar (HgS), mixed Au–Ag–Hg amalgam, Cu sulfide and Ag sulfide.     

An Apatite II permeable reactive barrier to remediate groundwater containing Zn,Pb and Cd

Phosphate-induced metal stabilization involving the reactive medium Apatite II™ [Ca_10−xNa_x(PO₄)_6−x(CO₃)_x(OH)₂], where x < 1, was used in a subsurface permeable reactive barrier (PRB) to treat acid mine drainage in a shallow alluvial groundwater containing elevated concentrations of Zn, Pb, Cd, Cu, SO₄ and NO₃. The groundwater is treated in situ before it enters the East Fork of Ninemile Creek, a tributary to the Coeur d’Alene River, Idaho. Microbially mediated SO₄ reduction and the subsequent precipitation of sphalerite [ZnS] is the primary mechanism occurring for immobilization of Zn and Cd. Precipitation of pyromorphite [Pb₁₀(PO₄)₆(OH,Cl)₂] is the most likely mechanism for immobilization of Pb. Precipitation is occurring directly on the original Apatite II. The emplaced PRB has been operating successfully since January of 2001, and has reduced the concentrations of Cd and Pb to below detection (2 μg L⁻¹), has reduced Zn to near background in this region (about 100 μg L⁻¹), and has reduced SO₄ by between 100 and 200 mg L⁻¹ and NO₃ to below detection (50 μg L⁻¹). The PRB, filled with 90 tonnes of Apatite II, has removed about 4550 kg of Zn, 91 kg of Pb and 45 kg of Cd, but 90% of the immobilization is occurring in the first 20% of the barrier, wherein the reactive media now contain up to 25 wt% Zn. Field observations indicate that about 30% of the Apatite II material is spent (consumed).     

Mercury in sediments from gold and copper exploitation areas in the Camaquã River Basin,Southern Brazil

Mercury concentrations were determined in stream sediments from the Camaquã River Basin, located in the shield region of the state of Rio Grande do Sul, southern Brazil. The resulting geochemical data show that overbank floodplain deposits exhibit higher concentrations than sediments collected from the active channel bed. In addition, higher Hg concentrations were measured in the fine(<63 μm) sediment fraction of the samples. Total Hg concentrations in the fine fraction of active stream sediments from Lavras do Sul County, which have been influenced by past gold mining activities, have decreased during the last five years to values ≤142 ng g⁻¹. However, in a settling pond containing abandoned mine wastes, the Hg concentration of a bulk sample remained exceptionally high (5220 ng g⁻¹). Preliminary speciation results show that Hg⁰ is the predominant species in most of the samples. This was the form of Hg released by the gold amalgamation activities in the area, and appears to be relatively stable under the existing E_h and pH conditions.     

Soil formation in Phobjikha Valley,Central Bhutan with special regard to the redistribution of loessic sediments

Soil development and landscape evolution were studied in the basin-shaped Phobjikha Valley at 2900–3200 m a.s.l., to the west of the Black Mountain Range, West Central Bhutan. The local environmental setting with strong along-valley winds, frequent freeze–thaw cycles, extensive dry periods and sparse vegetation cover seems to encourage the generation and short-distance transport of silt-sized particles. The effects of this process are evidenced in the smooth valley morphology and in the nature of the examined pedons. Their involvement in continuing redistribution of local sediments is reflected by a homogeneous silty-clayey and stone-free texture, varying profile depths, buried topsoils and weakly developed recent A horizons. In protected locations, in situ weathering of metamorphic parent materials results in alu-andic features with bulk densities <0.9 g cm^?3, (Al_o + ½Fe_o) > 2%, and phosphate retention >95%. Dominance by Al-hydroxy interlayered clay minerals and large amounts of well-crystallised iron oxides indicate an advanced stage of weathering. In areas of preferred eolian deposition, argic and ferralic features emerge, with clay contents of up to 60% and surface areas of >50 m² g^?1. Under forest, umbric horizons can develop. CEC_eff is below 10 cmol_c kg^?1 at all sites. Cluster and factor analyses of soil chemical and physical parameters confirm the redistribution of local sediments as a dominant factor behind the measured variables. No clear indication of glacial activities in the area was found, whereas the massive silty sediments in the lower parts of most profiles, the presence of debris slopes, and the asymmetric cross sections of the side valleys suggest periglacial conditions. Buried topsoils dated at about 2000 conventional ¹⁴C years BP indicate a weakening or absence of sediment influx under wetter conditions towards the end of the Holocene climate optimum. Charcoal on top of paleosols suggests that human activities of deforestation, grazing and arable agriculture may have contributed to the reactivation of local sediment redistribution until today.