Determination of Halogens (F, Cl, Br, I), Sulfur and Water in Seventeen Geological Reference Materials

Fluorine, chlorine, bromine, iodine and sulfur were determined in seventeen geological reference materials after extraction by pyrohydrolysis. Fluorine, Cl and S (as sulfate ions) were determined in the extraction solution by ion chromatography with detection limits of around 0.2 mg l⁻¹. Bromine and I were measured by ICP-MS with detection limits of 1 μg l⁻¹ for Br and 0.1 μg l⁻¹ for I. For rock samples, using normal extraction conditions (500 mg of sample and 100 ml of final solution) detection limits were 40 mg kg⁻¹ for F and Cl, 15 mg kg⁻¹ for S, 0.2 mg kg⁻¹ for Br and 0.02 mg kg⁻¹ for I. These detection limits may be improved by increasing the amount of sample and hence the concentration of the final solution. Water was also determined using an extraction technique based on H₂O degassing, reduction on zinc at 1000 °C and H₂ manometry. Our results for fluorine, chlorine, sulfur and water are in good agreement with literature data. Very few reference materials have recommended values for bromine and especially for iodine. Among the analysed samples, three are new reference materials: BHVO-2, BCR-2 and AGV-2.     

Refinements in BaSO4 to CO2 Preparation and δ18 O Calibration of the Sulfate Reference Materials NBS-127, IAEA SO-5 and IAEA SO-6

Refinements have been made to achieve over 99% yield in the conversion of CO to CO₂ in order to improve the reproducibility and accuracy of δ¹⁸ O measurements in sulfates. BaSO₄ (10-15 mg) was mixed with an identical amount of spectrographic-grade graphite and loaded into a Pt boat. The mixture was gradually heated to 1100 °C to reduce sulfate to CO and CO₂; the former gas was simultaneously converted to CO₂ by a glow discharge between Pt electrodes immersed in a magnetic field (produced by a pair of external neodymium magnets). A small memory effect was noticed during the analysis (less than 0.3‰ per 10‰ difference in δ¹⁸ O between two subsequently analysed samples). The memory effect, however, was suppressed by repetitive preparation of the same specimen. CO₂ produced in this way from sulfate reference samples was analysed on a dual inlet and triple collector mass spectrometer along with CO₂ equilibrated with VSMOW, GISP and SLAP water reference samples. To avoid large departures of measured isotope ratios from ¹⁸O/¹⁶O of the working calibrator we used CO₂ gas prepared from ocean water sulfate for this purpose. The calibrated δ¹⁸ O values (in ‰) obtained in this way for NBS-127, IAEA SO-5 and IAEA SO-6 reference materials were 8.73 ± 0.05, 12.20 ± 0.07 and -10.43 ± 0.12, respectively.     

Horizontal Strain Rate in Relation to Vein Formation of the Hishikari Gold Deposits, Southern Kyushu, Japan

Abstract: The Hishikari deposits comprise the Honko (Main), Yamada, and Sanjin deposits. The horizontal strain in the direction (approx. N40°W normal to the general NE-SW strike of the Hishikari vein system was calculated, based on the measured total vein widths to the distance along three crosscuts. Veins were assumed to accompany no significant fault displacement in the calculation. Veins in the eastern and the middle parts of the Honko-Sanjin deposits spatially occupy 3. 2% and 1. 3%, respectively, and veins in the Yamada deposit occupy 6. 7%. Significant local variation of strain is observed in some areas. Reported K-Ar ages on adularia-quartz veins indicate the duration of vein opening to be 2. 6 × 10⁵ yr in the Honko-Sanjin deposits and 5. 9 × 10⁵ yr in the Yamada deposit. Horizontal strain rates were calculated to be 5. 0–12 × 10^-8 yr^-1through the Hishikari deposits. The calculated strain rates at the Hishikari deposits are roughly comparable to the regional horizontal strain rate in the Recent. Widespread extensional movement in southern Kyushu seems to have been able to provide sufficient strain for the formation of the Hishikari deposits, rather than contribution of local movements.     

Petrology and geothermometry of retrograded Hercynian charnockites and host gneisses, Agly Massif, French Pyrenees

Abstract A Hercynian charnockite occurs within high-grade gneisses in the Agly Massif, French Pyrenees. Its thermal history has been evaluated using the Fe-Mg distribution coefticient ( K _D) between garnet and biotite. These minerals have different origins but similar compositions in the charnockites and host gneisses. In the charnockite, the Bi–Ga pairs are the retrograde products of Opx alteration. This Opx reaction with feldspar can be written. Opx + PI + Fluid 1(H₂O + Al + K + Fe + Ti) = Bi + Ga + Q + Fluid 2(H₂O + Na). The garnets are relatively Ca poor (4–2.5% grossular); they are automorphic and zoned in the gneisses and poikiloblastic in the charnockites. Both types show a retrograde rim (of few hundred microns'width) across which Fe and Mn increase as Mg decreases. The biotites show a good correlation between the octahedral cations (Ti⁴⁺+ Fe²⁺) and (Mg²⁺+ Al³⁺_VI); Ti and Fe both increase, whereas Mg and Al_VI decrease. There is an inverse linear correlation between Fe²⁺ and Mg²⁺ and the Fe/Mg ratio increases as Ti increases. The relation between Ti and K ^Ga-Bi_DFe-Mg is less clear: it seems that K _D slightly decreases as Ti increases. The equilibration temperatures of Ga–Bi pairs are discussed: the charnockite Ga-Bi pairs have equilibrated between 550°C and 600°C; whereas those of the gneisses have equilibrated between 550°C and 650°C. Two main thermal steps appear: one in the gneisses between 600-650°C and a second one in both the gneisses and the charnockites between 550°C and 600°C.     

Quantitative temperature-time information from retrograde diffusion zoning in garnet: constraints for the P–T–t history of the Central Black Forest, Germany

Garnet from a kinzigite, a high-grade gneiss from the central Black Forest (Germany), displays a prominent and regular retrograde diffusion zoning in Fe, Mn and particularly Mg. The Mg diffusion profiles are suitable to derive cooling rates using recent datasets for cation diffusion in garnet. This information, together with textural relationships, thermobarometry and thermochronology, is used to constrain the pressure–temperature–time history of the high-grade gneisses. The garnet–biotite thermometer indicates peak metamorphic temperatures for the garnet cores of 730–810  °C. The temperatures for the outer rims are 600–650  °C. Garnet–Al₂SiO₅–plagioclase–quartz (GASP) barometry, garnet–rutile–Al₂SiO₅–ilmenite (GRAIL) and garnet–rutile–ilmenite–plagioclase–quartz (GRIPS) barometry yield pressures from 6–9  kbar. U–Pb ages of monazite of 341±2  Ma date the low- P high- T metamorphism in the central Black Forest. A Rb/Sr biotite–whole rock pair defines a cooling age of 321±2  Ma. The two mineral ages yield a cooling rate of about 15±2  °C Ma⁻¹. The petrologic cooling rates, with particular consideration of the f O₂ conditions for modelling retrograde diffusion profiles, agree with the geochronological cooling rate. The oldest sediments overlying the crystalline basement indicate a minimum cooling rate of 10  °C Ma⁻¹.     

Diffusion-controlled corona reaction and overstepping of equilibrium in a garnet granulite, Yenisey Ridge, Siberia

Diffusion modelling is applied to layered garnet–pyroxene–quartz coronas, formed by a pressure-induced reaction between plagioclase and primary pyroxene in a metabasic granulite. The reconstructed reaction involves some change in composition of reactant minerals. The distribution of minerals between layers is satisfactorily explained by diffusion-controlled reaction with local equilibrium, in which the diffusion coefficient for Al was smaller than those for Fe, Mg and Ca by a factor of approximately four. Diffusion of Mg towards plagioclase implies a chemical-potential gradient for MgO component in a direction opposite to the changing Mg content of garnet; this is explained by the influence of Al₂O₃ on the chemical potential of the pyrope end-member. Grain-boundary diffusion is suggested to have operated, possibly with composition gradients different from those in the bulk minerals. Chemical-potential differences across the corona are estimated from the variation in garnet composition, enabling affinity (the free energy change driving the reaction) to be estimated as 6.9±1.8  kJ per 24-oxygen mole of garnet produced. This implies that the pressure for equilibrium among the minerals was overstepped by 1.4±0.4  kbar. The probable P–T conditions of reaction were in the range 650–790  °C, 8–10  kbar. Assuming a timescale of reaction between 10⁶ and 10⁸ years, estimated diffusion coefficients for Fe, Mg and Ca are in the range 9×10⁻²³ to 5×10⁻²⁰ m² s⁻¹. These are consistent with experimental values in the literature for solid-state diffusion, including grain-boundary diffusion.     

Pressure–temperature conditions and retrograde paths of eclogites, garnet–glaucophane rocks and schists from South Sulawesi, Indonesia

High-pressure metamorphic rocks exposed in the Bantimala area, c . 40  km north-east of Ujung Pandang, were formed as a Cretaceous subduction complex with fault-bounded slices of melange, chert, basalt, turbidite, shallow-marine sedimentary rocks and ultrabasic rocks. Eclogites, garnet–glaucophane rocks and schists of the Bantimala complex have estimated peak temperatures of T  =580–630 °C at 18  kbar and T  =590–640 °C at 24  kbar, using the garnet–clinopyroxene geothermometer. The garnet–omphacite–phengite equilibrium is used to estimate pressures. The distribution coefficient K _D1=[( X _pyr)³( X _grs)⁶/( X _di)⁶]/[(Al/Mg)_M2,wm (Al/Si)_T2,wm]³ among omphacite, garnet and phengite is a good index for metamorphic pressures. The K _D1values of the Bantimala eclogites were compared with those of eclogites with reliable P–T  estimates. This comparison suggests that peak pressures of the Bantimala eclogites were P =18–24  kbar at T  =580–640 °C. These results are consistent with the P–T  range calculated using garnet–rutile–epidote–quartz and lawsonite–omphacite–glaucophane–epidote equilibria.     

Impure marbles from the UHP Brossasco-Isasca Unit (Dora-Maira Massif, western Alps): evidence for Alpine equilibration in the diamond stability field and evaluation of the X(CO2) fluid evolution

Two impure ultrahigh-pressure (UHP) marbles, a calcite marble with the peak assemblage Grt + Phe + Cpx + Rt + (Arg) and a dolomite marble with the peak assemblage Crn + Chl + Rt + Dol (±Arg), from the same lens from the polymetamorphic complex of the Brossasco-Isasca Unit (BIU) (southern Dora-Maira Massif) have been petrologically investigated and modelled by calculating P – T phase-diagram projections for H₂O–CO₂ mixed-volatile systems. Thermobarometric data obtained from the calcite marble suggest Alpine peak conditions in the diamond stability field (4.0 GPa at 730 °C), and allow reconstruction of the earlier portion of the Alpine retrograde P – T path, which is characterized by a significant decompression coupled with a moderate and continuous cooling to 650 °C at 2.50 GPa. The modelled fluid compositions at peak conditions point to 0.025 ≤  X (CO₂) ≤ 0.10 and X (CO₂) ≤ 0.0012 in the calcite marble and dolomite marble, respectively, suggesting fluid heterogeneity at the local scale and an internally buffered fluid evolution of the studied impure marbles. The lack of micro-diamond in the BIU marbles is explained by the very-low X (CO₂) values, which favoured relatively high f O₂-conditions, preventing the formation of diamond at the UHP peak metamorphic conditions.     

Flotation Separation of Trace Elements from Alkaline-Earth Matrices by Co(III) Hexamethylenedithiocarbamate before ICP-AES Determination

A method for the selective separation of Ag, Cd, Cr, Cu, Ni, Pb and Zn in traces from solutions of calcite (CaCO₃), dolomite (CaMg(CO₃)₂) and gypsum (CaSO₄.2H₂O) before their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) is presented. The expected interferences of Ca and Mg on intensities of trace analytes were removed by collecting the elements of interest with cobalt(III) hexamethylenedithiocar-bamate, Co(HMDTC)₃. The flotation of aqueous solutions (1 l) of calcite, dolomite and gypsum was performed at pH 6.0, by 1.5 mg l⁻¹ Co and 0.6 mmol l⁻¹ HMDTC⁻. To minimise the effect of the reaction between Ca/Mg, which restrains the function of the surfactant, careful selection of the most suitable foaming reagent was necessary. The accuracy of the method was established by analysing natural alkaline-earth minerals by the standard addition method as well as using the dolomite reference materials GBW 07114 and GSJ JDo-1. The ICP-AES limits of detection following flotation on different minerals were found to be 0.080 μg g⁻¹ for Cd, 0.105 μg g⁻¹ for Ag, 0.142 μg g⁻¹ for Cu, 0.195 μg g⁻¹ for Cr, 0.212 μg g⁻¹ for Ni, 0.235 μg g⁻¹ for Zn and 0.450 μg g⁻¹ for Pb.     

Contrasting mineral parageneses in high-temperature calc-silicate granulites: examples from the Eastern Ghats, India

Abstract Three types of mineral associations are described from calc-silicate granulites from the Eastern Ghats, India, where geothermobarometry in associated rocks suggests extremely high P–T conditions of metamorphism ( c . 9 ± 1 kbar, 950° C). These mineral associations are: (i) calcite + quartz + scapolite + plagioclase, (ii) calcite + scapolite + wollastonite + porphyroblastic garnet + coronal garnet and (iii) calcite + quartz + wollastonite + scapolite + porphyroblastic garnet + coronal garnet, all coexisting with K-feldspar, titanite and clinopyroxene. The first two associations evolved through nearly isobaric cooling retrograde paths, whereas the third evolved through a nearly isothermal decompression path followed by an isobaric cooling retrograde path. Textural and compositional characteristics suggest the following mineral reactions in the calc-silicate granulites: calcite + quartz = wollastonite + CO₂, calcite + plagioclase = scapolite, calcite + scapolite + wollastonite = porphyroblastic garnet ± quartz + CO₂, CaTs + wollastonite = coronal garnet (association ii) and wollastonite + scapolite = coronal garnet (association iii) + quartz + CO₂. Andradite content in garnet was buffered by the redox equilibria wollastonite + hedenbergite + O₂= andradite + quartz (association iii) and wollastonite + andradite + CaTs + scapolite = hedenbergite + calcite + grossular + O₂ (association ii). The contrasting mineral parageneses have been ascribed to interplay of variables such as X _CO2, f _O2, f _HCl in the fluid, bulk Na content and the nature of the retrograde P–T–X _CO2 paths through which the rocks evolved.     

Reaction textures in calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica: implications for the retrograde P–T path

Calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica, exhibit a sequence of reaction textures that have been used to elucidate their retrograde P–T path. The highest temperature recorded in the calc-silicates is represented by the wollastonite- and scapolite-bearing assemblages which yield at least 760°C at 6 kbar based on experimental results. The calc-silicates have partially re-equilibrated at lower temperatures (down to 450°C) as evidenced by the successive reactions: (1) wollastonite + scapolite + calcite = garnet + CO₂, (2) wollastonite + CO₂= calcite + quartz, (3) wollastonite + plagioclase = garnet + quartz, (4) scapolite = plagioclase + calcite + quartz, (5) garnet + CO₂+ H₂O = epidote + calcite + quartz, and (6) clinopyroxene + CO₂+ H₂O = tremolite + calcite + quartz.
The reaction sequence observed indicates that a CO₂ was relatively low in the wollastonite-bearing rocks during peak metamorphic conditions, and may have been further lowered by local infiltration of H₂O from the surrounding migmatitic gneisses on cooling. Fluid activities in the Bolingen calc-silicates were probably locally variable during the granulite facies metamorphism, and large-scale CO₂ advection did not occur.
A retrograde P–T path, from the sillimanite stability field ( c. 760°C at 6 kbar) into the andalusite stability field ( c. 450°C at <3 kbar), is suggested by the occurrence of secondary andalusite in an adjacent cordierite–sillimanite gneiss in which sillimanite occurs as inclusions in cordierite.     

Experimental study of the stability of sudoite and magnesiocarpholite and calculation of a new petrogenetic grid for the system FeO–MgO–Al2O3–SiO2–H2O

The solid-solid reaction magnesiocarpholite = sudoite + quartz has been bracketed between 350 and 500°C, 6.3 and 7.8 kbar. Because it is impossible to synthesize end-member sudoite, all experiments were carried out using natural minerals as starting materials. Although mineral compositions were very close to those of the end-members, the effect of the fluorine content in carpholite was significant. Particularly in those experiments where sudoite grows at the expense of carpholite, electron microprobe analysis of the run products shows that a more stable F-rich carpholite crystallizes too, and consumes the fluorine released in solution by the breakdown of the original carpholite.
Our experimental results are combined, through a thermodynamic analysis, with a previous data set and with previous experimental data concerning the relative stability of chlorite, talc and magnesiocarpholite with excess of quartz and water as a function of P–T and AlAl(SiMg)_-1 substitutions in phyllosilicates. This allows us to constrain the feasible thermodynamic parameters (H°_f, sud; S ° sud) and (H°_f,car; S °_car) for the Mg end-members. Using the partition coefficients calculated from natural parageneses, we have computed a petrogenetic grid for the system FeO–MgO–Al₂O₃–SiO₂–H₂O. It demonstrates that parageneses involving sudoite and carpholite can be used as indicators of P–T conditions, up to 600° C, 8 kbar for sudoite, and at higher pressure for carpholite.     

A second natural occurrence of yoderite

A second example of yoderite has been discovered in whiteschists from the Southern Chewore Hills of northern Zimbabwe. The mineral is pale green in colour and occurs in an equilibrium assemblage with talc+chlorite+kyanite+dravite+hematite. There is no quartz present. Recalculated microprobe analyses give a structural formula of Mg₂Al_5.7Fe_0.3Si₄O₁₈(OH)₂, similar to that obtained for the type locality at Mautia Hill, Tanzania, i.e. Mg₂Al_5.6Fe_0.4Si₄O₁₈(OH)₂. Textural relationships and relative proportions of minerals suggest that the yoderite was formed by reaction between talc, chlorite, kyanite and hematite. Experimental evidence suggests high-water-pressure metamorphic conditions at temperatures exceeding a reaction curve that extends between 13  kbar at 590  °C and 21  kbar at 650  °C. The yoderite-bearing whiteschist is associated with a 1.4  Ga dismembered ophiolite. It is proposed that this yoderite occurrence is associated with a relict subduction/suture zone.     

Two-stage decompression in orthopyroxene–sillimanite granulites from Forefinger Point, Enderby Land, Antarctica: implications for the evolution of the Archaean Napier Complex

Magnesian metapelites of probable Archaean age from Forefinger Point, SW Enderby Land, East Antarctica, contain very-high-temperature granulite facies mineral assemblages, which include orthopyroxene (8–9.5 wt% Al₂O₃)–sillimanite ± garnet ± quartz ± K-feldspar, that formed at 10 ± 1.5 kbar and 950 ± 50°C. These assemblages are overprinted by symplectite and corona reaction textures involving sapphirine, orthopyroxene (6–7 wt% Al₂O₃), cordierite and sometimes spinel at the expense of porphyroblastic garnet or earlier orthopyroxene–sillimanite. These textures mainly pre-date the development of coarse biotite at the expense of initial mesoperthite, and the subsequent formation of orthopyroxene (4–6 wt% Al₂O₃)–cordierite–plagioclase rinds on late biotite.
The early reaction textures indicate a period of near-isothermal decompression at temperatures above 900°C. Decompression from 10 ± 1.5 kbar to 7–8 kbar was succeeded by biotite formation at significantly lower temperatures (800–850°C) and further decompression to 4.5 ± 1 kbar at 700–800°C.
The later parts of this P–T evolution can be ascribed to the overprinting and reworking of the Forefinger Point granulites by the Late-Proterozoic ( c . 1000 Ma) Rayner Complex metamorphism, but the age and timing of the early high-temperature decompression is not known. It is speculated that this initial decompression is of Archaean age and therefore records thinning of the crust of the Napier Complex following crustal thickening by tectonic or magmatic mechanisms and preceding the generally wellpreserved post-deformational near-isobaric cooling history of this terrain.     

Climate variability in the SE Alps of Italy over the past 17 000 years reconstructed from a stalagmite record

Stalagmite SV1 from Grotta Savi, located at the SE margin of the European Alps (Italy), is the first Alpine speleothem that continuously spans the past c . 17kyr. Extension rate and δ¹⁸O_c record for the Lateglacial probably reflect a combination of temperature and rainfall, with rainfall exerting the dominant effect. Low speleothem calcite δ¹⁸ O_c values were recorded from c . 14.5 and 12.35 kyr, during GI-1 (Bølling— Allerød) interstadial, which in our interpretation, was warm and wet. The GS-1 (Younger Dryas) was characterized by a shift to heavier δ¹⁸ O_c, coinciding with δ¹³C_c enrichment and extremely low extension rate (<8 μm/year). These characteristics indicate that GS-1 climate was cool and dry in the SE Alps. Calibration using historical data revealed that there is a positive δ¹⁸O_c/dT relationship. A 1°C rise in mean annual temperature should correspond to c . 2.85% increase of SV-1 δc¹⁸O_c. We reconstructed a slow and steady temperature rise of c . 0.5°C since 10 kyr BP, in broad agreement with reconstructions from pollen data for SE Europe. Stalagmite SV1 indicates that climate variability in the SE Alps has been influenced by the Mediterranean Sea for the past c . 17 kyr.     

Spectrophotometric Determination of Vanadium in Carbonaceous Shales (Stone Coal Ores) Using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A selective and sensitive spectrophotometric method has been developed for determining the total amount of vanadium in carbonaceous shales (stone coal ores). The method is based on the reaction of vanadium(V) with the chromophore reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) in the presence of hydrogen peroxide. In a 0.072 mol l⁻¹ sulfuric acid medium, 5-Br-PADAP reacts with vanadium(V) to form a red-violet complex with a maximum absorption peak at 596 nm with an apparent molar absorption coefficient of the complex of 8.45 × 10⁴ l mol⁻¹ cm⁻¹. Beer's law was obeyed in the range 0–25 μg vanadium in 25 ml of solution, with a correlation coefficient of 0.9995. Interferences due to various non-target ions were also investigated and high quantities of other common inorganic ions were tolerable. The method involved the dissolution of the ore sample by Na₂O₂ fusion, followed by filtering of the alkali solution after which Fe(III), Cu(II), Ni(II) and Co(II) etc. were effectively separated from the solution by precipitation in a NaOH solution. Selectivity was increased with the use of EDTA as a masking agent. The vanadium in ore samples was determined with a relative deviation (RSD) between 0.20 and 0.76%, and has been successfully applied to the determination of vanadium-bearing stone coal ores. The results indicated that the accuracy of 5-Br-PADAP spectrophotometry is comparable with the ICP-AES method. The characteristics of the method, i.e., simplicity, selectivity, sensitivity and rapid calibration, make it specially suitable for routine analysis.     

Petrology of spinel granulites from Araku, Eastern Ghats, India, and a petrogenetic grid for sapphirine-free rocks in the system FMAS

Abstract Spinel-quartz-cordierite and spinel-quartz are found as relic prograde assemblages in Fe-rich granulites from the Araku area, Eastern Ghats belt, India. Subsequent reactions produced orthopyroxene + sillimanite in the former association and garnet + sillimanite in the latter. The first reaction is univariant in the FMAS system, but is trivariant in the present case because of the presence of Zn and Fe³⁺ in spinel. The second reaction also has high variance because of Zn and Fe³⁺, but also because of the presence of Ca in garnet. Thermobarometry shows that the metamorphic conditions were approximately 950° C and 8.5 kbar and the fo ₂ was near the NNO buffer. In Fe-rich bulk compositions and low- P -high- T conditions of metamorphism, two of the univariant reactions around the invariant point [Sa], namely (Sa, Hy) and (Sa, Cd), change topology due to reverse partitioning of Fe-Mg between coexisting garnet and spinel. An alternative partial petrogenetic grid in the system FMAS is constructed for such conditions and is applied satisfactorily to several sapphirine-free spinel granulites. It is shown that bulk composition ( X _Fe and Zn) exerts greater control on the stability of spinel + quartz than fo ₂. The effect of the presence of Zn and Fe³⁺ in spinel on the proposed grid is evaluated. Reaction textures in the Araku spinel granulites can be explained from the petrogenetic grid as due to near-isobaric cooling.     

中国第二次北极科学考察路线上温室气体瓶采样结果分析

用气相色谱和非红外色散分析方法,分析了中国第二次北极科学考察路线上采集到的气体样品中温室气体(CO₂和CH₄)的浓度,对不同纬度带上CO₂和CH₄平均浓度变化特征进行了研究.结果表明:海洋表面不同纬度带上CO₂的浓度呈现出随纬度升高而减小的趋势,这与全球范围内CO₂的年平均浓度的地理分布特征相反,显示了海洋对CO₂气体的吸收作用.45°N以北的海洋表面,CH₄浓度有随纬度升高而增大的趋势,这与全球范围内CH₄的年平均浓度的地理分布特征相同;中纬度近海岸地区温室气体浓度变化无明显规律,可能受到区域或局地气团的影响较大.     

Controls on the first appearance of jadeitic pyroxene, northern Diablo Range, California

A reaction producing jadeitic pyroxene in metagreywackes of the northern Diablo Range has been identified on the basis of mineral distribution, isograd patterns and composition of coexisting minerals. The appearance of jadeitic pyroxene (∼Jd₈₀) is closely followed by the disappearance of pumpellyite, which indicates that pumpellyite plays a major role in the pyroxene-producing reaction. A new projection from hematite, lawsonite, chlorite, quartz and H₂O on to the NaAlO₂-FeO-MgO ternary confirms the role of pumpellyite in pyroxene production and suggests a reaction of the form: 1.00 pumpellyite + 0.31 chlorite + 8.71 albite + 0.70 hematite + 2.00 H₂O = 8.54 jadeite + 0.57 glaucophane + 3.09 lawsonite + 5.26 quartz. Metagreywackes of the northern Diablo Range were metamorphosed under conditions of P _H2O= P _total at 200-300 °C and 7.5-10.0 kbar. Despite the low temperatures attained during metamorphism, the assumption of equilibrium yields results consistent with field observations and phase relations.