A steep-fronted Carboniferous carbonate platform: clinoformal geometry and lithofacies (Picos de Europa, NW Spain)

A steep‐margined carbonate platform is developed in the Carboniferous synorogenic foreland basin of northern Spain. Dips of 60–90° produced during Late Carboniferous thrusting enable cross‐sections of a 4‐km‐wide portion of the marginal area of this platform (Las Llacerias outcrop) to be studied in aerial photographs at a seismic scale. Three stratal domains are observed: (1) a horizontal‐bedded platform; (2) a clinoformal‐bedded margin with a relief of up to 500 m; and (3) a low‐angle toe‐of‐slope, where slope beds interfinger with basin sediments. The slope shows well‐bedded sigmoidal clinoforms with depositional dips ranging from 15° to 32°. Based on lithology and stratal patterns, four facies groups have been recognized: (1) a flat‐topped platform, in which thick algal boundstone, skeletal packstone–grainstone and peloidal micrite wackestone with a poorly rhythmic character prevail; (2) the platform margin and upper slope, characterized by microbial boundstone spanning a bathymetric range of ≈150 m measured from the break of slope; (3) a slope, predominantly composed of margin‐derived rudstones and breccias; and (4) a toe‐of‐slope to basin zone, where a cyclic alternation of spiculitic siltstones, packstone to grainstone calciturbidites and rudstone/breccia is visible. Five successive stages of platform development are deduced: (1) Bashkirian: flooding of the pre‐existing Serpukhovian platform giving rise to the nucleation of a low‐angle ramp to the south‐east of the study area with microbial mud‐mound accumulations, and breccias and calciturbidites on the margins; (2) Early Moscovian: an influx of siliciclastic sediment buried part of the platform and reduced the area of carbonate sedimentation; (3) Moscovian: aggradation and progradation of the carbonate system produced an extensive steep‐margined and flat‐topped shallow‐water platform (shelf system); (4) Latest Moscovian–earliest Kasimovian: drowning of the platform; and (5) Kasimovian: covering of the platform by marly calcareous ramp sediments.     

Facies,geometry and growth phases of the Valdorria carbonate platform (Pennsylvanian,northern Spain)

The 14 km wide Valdorria outcrop (Pennsylvanian, northern Spain) is one of the few examples of entirely exposed flat‐topped and high‐relief carbonate platforms reported in the fossil rock record. Laterally and vertically traceable stratal patterns expose three phases of growth. Phase I is a 430 m thick platform to slope succession that prograded over 6 km, and is dated as Early Bashkirian (Akavasian–Askynbashian). Phase II aggraded and prograded, exhibiting 180 m thickness of cyclical platform top deposits, dated as Late Bashkirian (Asatauian). Phase III is a mound‐shape structure that developed over the platform top of Phase II as a new phase of platform nucleation. It is 535 m thick and 2 km wide, and dated as Late Bashkirian (Asatauian–Transition interval). The observed changes of growth styles during platform evolution, from a prograding to an aggrading–prograding system, and a rapid aggradational phase, are inferred to be controlled by flexural subsidence in the active Cantabrian foreland basin, at the Variscan orogenic front. The metre‐scale shallowing‐upward cycles of the platform top are most probably due to glacioeustasy, as evidenced by well‐recorded subaerial exposure surfaces superimposed on subtidal deposits, and by a stratal pattern recurrent in a short interval of about 160 kyr. Observations of outcropping Bashkirian cyclothems in an isolated carbonate system, devoid of siliciclastic input, are relevant for a better understanding of the impact of high‐frequency sea‐level fluctuations on the carbonate factory. Moreover, progradation of the platform margin during Phase I reaches a rate of 2500 m/Myr, and 1810 m/Myr during Phase II; rates that are high when compared to other Pennsylvanian examples. The aggradation rate of 447 m/Myr calculated for the Late Bashkirian–Transition interval (Phases II and III; uncorrected for compaction, missing beats and erosion) is uncommonly high in comparison to coeval Pennsylvanian examples. The platform exhibits a self‐nourishing prograding microbial boundstone‐dominated slope. Thus, the slope‐shedding model applies well to Valdorria. However, Phase II recorded eustatic variations able to inhibit the slope microbial boundstone factory during low sea‐level stands; this is marked by common slope red‐stained breccias synchronous to platform top subaerial exposure phases. Contrarily, periods of relative high sea‐level and rapid subsidence in Phase III registered a greater development of cemented microbial boundstone. These observed, partly opposing relationships of sea‐level stands, shedding modes and slope architecture provide an improvement of the currently used slope‐shedding model. The overall architecture of the Valdorria outcrop compares well with that of other contemporaneous platforms, such as Sierra del Cuera and Bolshoi Karatau. Valdorria shares the high‐relief and flat‐topped, steep slopes, cyclothemic patterns and occurrence of karst features with the Pricaspian Basin platforms (Tengiz, Karachaganak and Kashagan), with minor variations in facies distribution of the internal platform. Furthermore, the continuous seismic‐scale outcrop of Valdorria, together with its isolated setting and asymmetrical growth, makes it a very good candidate for potential subsurface analogues of hydrocarbon‐bearing systems.     

Architecture and sedimentology of the Kerinitis Gilbert‐type fan delta,Corinth Rift,Greece

The Kerinitis Delta in the Corinth Rift, Greece, is a footwall derived, coarse‐grained, Gilbert‐type fan delta deposited in the hangingwall of a linked normal fault system. This giant Gilbert‐type delta (radius 3·8 km, thickness > 600 m) was supplied by an antecedent river and built into a brackish to marine basin. Although as yet poorly dated, correlation with neighbouring deltas suggests that the Kerinitis Delta was deposited during a period of 500 to 800 ka in the Early to early Middle Pleistocene. Facies characterizing a range of depositional processes are assigned to four facies associations (topset, foreset, bottomset and prodelta). The dominantly fluvial topset facies association has locally developed shallow marine (limestone) and fluvial‐shoreface sub‐associations. This delta represents a subsidence‐dominated system in which high fault displacement overwhelmed base‐level falls (creation of accommodation predominantly ≥ 0). Stratal geometries and facies stacking patterns were used to identify 11 key stratal surfaces separating 11 stratal units. Each key stratal surface records a landward shift in the topset breakpoint path, indicating a rapid increase in accommodation/sediment supply. Each stratal unit records a gradual decrease in accommodation/sediment supply during deposition. The cyclic stratal units and key stratal surfaces are interpreted as recording eustatic falls and rises, respectively. A 30 m thick package of foresets below the main delta records the nucleation of a small Proto‐delta probably on an early relay ramp. Based on changes in stratal unit geometries, the main delta is divided into three packages, interpreted as recording the initiation, growth and death of the controlling fault system. The Lower delta comprises stacked, relatively thin, progradational stratal units recording low displacement on the young fault system (relay ramp). The Middle delta comprises vertically stacked stratal units, each recording initial aggradation–progradation followed by progradation; their aggradational component increases up through the Middle delta, which records the main phase of increasing rate of fault displacement. The Upper delta records pure progradation, recording abrupt cessation of movement on the fault. A major erosion surface incising basinward 120 m through the Lower and Middle delta records an exceptional submarine erosion process (canyon or delta collapse).     

Three‐fold nature of coastal progradation during the Holocene eustatic highstand,Po Plain,Italy – close correspondence of stratal character with distribution patterns

Although general trends in transgressive to highstand sedimentary evolution of river‐mouth coastlines are well‐known, the details of the turnaround from retrogradational (typically estuarine) to aggradational–progradational (typically coastal/deltaic) stacking patterns are not fully resolved. This paper examines the middle to late Holocene eustatic highstand succession of the Po Delta: its stratigraphic architecture records a complex pattern of delta outbuilding and coastal progradation that followed eustatic stabilization, since around 7·7 cal kyr bp . Sedimentological, palaeoecological (benthic foraminifera, ostracods and molluscs) and compositional criteria were used to characterize depositional conditions and sediment‐dispersal pathways within a radiocarbon‐dated chronological framework. A three‐stage progradation history was reconstructed. First, as soon as eustasy stabilized (7·7 to 7·0 cal kyr bp ), rapid bay‐head delta progradation (ca 5 m year^?1), fed mostly by the Po River, took place in a mixed, freshwater and brackish estuarine environment. Second, a dominantly aggradational parasequence set of beach‐barrier deposits in the lower highstand systems tract (7·0 to 2·0 cal kyr bp ) records the development of a shallow, wave‐dominated coastal system fed alongshore, with elongated, modestly crescent beaches (ca 2·5 m year^?1). Third, in the last 2000 years, the development of faster accreting and more rapidly prograding (up to ca 15 m year^?1) Po delta lobes occurred into 30 m deep waters (upper highstand systems tract). This study documents the close correspondence of sediment character with stratal distribution patterns within the highstand systems tract. Remarkable changes in sediment characteristics, palaeoenvironments and direction of sediment transport occur across a surface named the ‘A–P surface’. This surface demarcates a major shift from dominantly aggradational (lower highstand systems tract) to fully progradational (upper highstand systems tract) parasequence stacking. In the Po system, this surface also reflects evolution from a wave‐dominated to river‐dominated deltaic system. Identifying the A–P surface through detailed palaeoecological and compositional data can help guide interpretation of highstand systems tracts in the rock record, especially where facies assemblages and their characteristic geometries are difficult to discern from physical sedimentary structures alone.     

Architecture of coastal and alluvial deposits in an extensional basin: the Carboniferous Joggins Formation of eastern Canada

Abstract The Joggins Formation was deposited in the Cumberland Basin, which experienced rapid mid‐Carboniferous subsidence on bounding faults. A 600 m measured section of coastal and alluvial plain strata comprises cycles tens to hundreds of metres thick. The cycles commence with coal and fossiliferous limestone/siltstone intervals, interpreted as widespread flooding events. These intervals are overlain by coarsening‐upward successions capped by planar‐based sandstone mounds, up to 100 m in width that represent the progradation of small, river‐generated delta lobes into a standing body of open water developed during transgression. The overlying strata contain sand‐rich heterolithic packages, 1–8 m thick, that are associated with channel bodies 2–3 m thick and 10–50 m wide. Drifted plant debris, Calamites groves and erect lycopsid trees are preserved within these predominantly green‐grey heterolithic sediments, which were deposited on a coastal wetland or deltaic plain traversed by channel systems. The cycles conclude with red siltstones, containing calcareous nodules, that are interbedded with thin sandstones and associated with both single‐storey channel bodies (1–1·5 m thick and 2–3 m wide) and larger, multistorey channels (3–6 m thick) with incised margins. Numerous channel bodies at the same level suggest that multiple‐channel, anastomosed river systems were developed on a well‐drained floodplain. Many minor flooding surfaces divide the strata into parasequences with dominantly progradational and aggradational stacking patterns. Multistorey channel bodies are relatively thin, fine grained and modestly incised, and palaeosols are immature and cumulative. The abundance and prominence of flooding surfaces suggests that base‐level rise was enhanced, whereas the lack of evidence for abrupt basinward stepping of facies belts, coupled with the absence of strong fluvial incision and mature palaeosols, suggests that base‐level fall was suppressed. These architectural features are considered to reflect a tectonic architectural signature, in accordance with the high‐subsidence basinal setting. Evidence for restricted marine influence and variation in floral assemblages suggests modulation by eustatic and climatic effects, although their relative importance is uncertain.     

Tectonic, eustatic and environmental controls on mid-Cretaceous carbonate platform deposition, south-central Pyrenees, Spain

Cenomanian–Turonian strata of the south‐central Pyrenees in northern Spain contain three prograding carbonate sequences that record interactions among tectonics, sea level, environment and sediment fabric in controlling sequence development. Sequence UK‐1 (Lower to Upper Cenomanian) contains distinct lagoonal, back‐margin, margin, slope and basin facies, and was deposited on a broad, flat shelf adjacent to a deep basin. The lack of reef‐constructing organisms resulted in a gently dipping ramp morphology for the margin and slope. Sequence UK‐2 (Upper Cenomanian) contains similar shallow‐water facies belts, but syndepositional tectonic modification of the margin resulted in a steep slope and deposition of carbonate megabreccias. Sequence UK‐3 (Lower to Middle Turonian) records a shift from benthic to pelagic deposition, as the shallow platform was drowned in response to a eustatic sea‐level rise, coupled with increased organic productivity. Sequences UK‐1 to UK‐3 are subdivided into lowstand, transgressive and highstand systems tracts based on stratal geometries and facies distribution patterns. The same lithologies (e.g. megabreccias) commonly occur in more than one systems tract, indicating that: (1) the depositional system responded to more than just sea‐level fluctuations; and (2) similar processes occurred during different times throughout sequence development. These sequences illustrate the complexity of carbonate platform dynamics that influence sequence architecture. Rift tectonics and flexural subsidence played a major role in controlling the location of the platform margin, maintaining a steep slope gradient through syndepositional faulting, enhancing slope instability and erosion, and influencing depositional processes, stratal relationships and lithofacies distribution on the slope. Sea‐level variations (eustatic and relative) strongly influenced the timing of sequence and parasequence boundary formation, controlled changes in accommodation and promoted platform drowning (in conjunction with other factors). Physico‐chemical and climatic conditions were responsible for reducing carbonate production rates and inducing platform drowning. Finally, a mud‐rich sediment fabric affected platform morphology, growth geometries (aggradation vs. progradation) and facies distribution patterns.     

Facies architecture and sequentiality of nearshore and 'shelf'sandbodies; Haystack Mountains Formation, Wyoming, USA

The Haystack Mountains Formation (Campanian, Mesaverde Group, US Western Interior Basin, Wyoming) contains a series of shallow-marine sandbodies, extending tens of kilometres out from a basin margin. The study succession (around 200 m thick) is composed of eight major sandstone tongues (Bolten Ranch, O'Brien Spring, Seminoe 1–2–3–4, Hatfield 1 and 2 members), each partially encased within marine shale intervals. The Formation is ‘sequential’at several scales. At the largest scale, the whole succession presents an aggradational to basinward-stepping stacking pattern of the sandstone tongues. At a lower level, each tongue (member) is characterized internally by two different types of lithosome: the first represents shoreface progradation with hummocky cross-strata passing up to swaley and trough cross-stratified sandstones. This lithosome is erosively truncated at its top in most cases, and has a general sheet-like geometry along strike, whereas down dip it displays a series of sharp-bounded clinothems. The latter sometimes indicate a downward as well as a basinward shift through time, as suggested by the occurrence of coarser and/or shallower facies at a lower level in the shoreface profile. The second type of lithosome is sheet- or wedge-like and sharply overlies the shoreface deposits. The lithosome consists of laterally widespread units of planar tabular to trough cross-bedded medium sandstones passing laterally (in a dip direction) into bioturbated sandstones. The lower part of this lithosome is progradational, becoming retrogradational into the overlying shales. The facies within the cross-bedded lithosome suggest a tidally dominated delta front to estuarine depositional setting. The two types of lithosome are not related genetically. The erosion surface separating the two lithosomes is a sequence boundary separating forced-regressive (relative sea-level fall) shoreface deposits from lowstand to transgressive (early relative sea-level rise), cross-bedded deposits. The uppermost part of the cross-stratified lithosome shows a landward-stepping of component parasequences and is abruptly blanketed by open-marine shales. The most widespread cross-bedded lithosomes are apparently best developed in the lowermost members of the Haystack Mountains Formation, i.e. in the aggradational part of the large-scale progradational succession. In the uppermost, highly progradational sandstone tongues, the shoaling-upward shoreface lithosome dominates, whereas the cross-bedded lithosome occurs in narrow, lensoid belts, or is absent. The middle portion of the succession shows intermediate characteristics. The vertical variation in geometry, thickness and progradational extent of successive cross-bedded lithosomes results from greater confinement of the incised nearshore systems both in space (landward direction) and in time (from the aggradation to the progradation architecture). The latter is a consequence of a decreasing rate of accommodation creation through time.     

Response of geomorphic and geological processes to insufficient and ample sediment supply along the upper continental slope in the north-western South China Sea

We document upper slope sedimentary process and strata on the passive margin of the north-western South China Sea (SCS) using multibeam bathymetry and high-resolution seismic data. The upper slope can be divided into two segments based on geomorphology, strata, and sediment supply. (1) The east segment is characterised by deep incised canyons and gullies, and slope failure. Submarine canyons with both U- and V-shaped morphology (13–28 km long × 2–4 km wide) are oriented NNE–SSW or NNW–SSE and are approximately perpendicular to the slope. Erosion is dominant, with escarpments, slumps, and several mass transport deposits (MTDs). Shelf-margin clinoforms show strongly upward vertical aggradation with time and are strongly aggradational in style. Since 5.5 Ma, the shelf break line migrated southwards and then retreated to its present position. The segment is classified as erosion-dominated due to insufficient sediment supply. (2) The west segment has a smooth surface, gentle gradient, and a strongly progradational style, with MTDs triggered by high sedimentation rates. Shelf-margin clinoforms display a combination of progradational and aggradational stacking patterns. The shelf break line migrated southwards with time. The segment is classified as deposition-dominated, resulting from plentiful sediment supply. Depositional models have been constructed for each segment: a constant shelf break model with insufficient sediment supply in the east, and a migration shelf break model with plenty sediment supply in the west. This case study contributes to the understanding of the upper slope sedimentary process and stratigraphic style under different sediment supply conditions.     

Sub-wavebase cross-bedded grainstones on a distally steepened carbonate ramp, Upper Miocene, Menorca, Spain

Cross‐bedded grainstones on carbonate ramps and shelves are commonly related to the locus of major wave energy absorption such as shorelines, shoals or shelf breaks. In contrast, on the Early Tortonian carbonate platform of Menorca (Balearic Islands), coarse‐grained, cross‐bedded grainstones are found at a distance from the palaeoshoreline where they were deposited below the wavebase. Excellent exposures along continuous outcrops on the sea cliffs of Menorca reveal the depositional profile and three‐dimensional distribution of the different facies belts of the Tortonian ramp depositional system. Basinward from the palaeoshoreline, fan deltas and beach deposits pass into 5‐km‐wide gently dipping bioturbated dolopackstone (inner and middle ramp), then into 12–20°‐dipping dolograinstone/rudstone clinobeds (ramp slope) and, finally, into subhorizontal fine‐grained basinal dolowackestone to dolopackstone (outer ramp). In this Miocene example, coarse‐grained grainstones exist in five different settings other than beach deposits: (1) on the middle ramp, where cross‐bedded grainstones were deposited by currents roughly parallel to the shoreline at 40–70 m estimated water depth and are interbedded with gently dipping bioturbated dolomitized packstones; (2) on the upper slope, where clinobeds are composed mostly of in situ rhodoliths and red‐algae fragments; (3) on the lower slope, as small‐scale bedforms (small three‐dimensional subaqueous dunes) migrating parallel to the slope; (4) at the transition between the lower slope and the outer ramp, where mollusc‐rich and rhodolithic rudstones and grainstones, interbedded in dolomitized laminated wackestones containing abundant planktonic foraminifera, infill slide/slump scars as upslope‐backstepping bodies (backsets); (5) at the toe of the slope, where coarse skeletal grainstones indicate bedform migration parallel to the platform margin, induced by currents at more than 150 m estimated water depth. This Late Miocene example also illustrates how changes in intrabasinal environmental conditions (nutrients and/or temperature) may produce changes in stratal patterns and facies architecture if they affect the biological system. Two depositional sequences compose the Miocene platform on Menorca, where a reef‐rimmed platform prograded onto an earlier distally steepened ramp. The transition from the ramp to the reef‐rimmed platform was effected by an increase in accommodation space caused by ecological changes, promoting a shift from a grain‐ to a framework‐producing biota.     

Stacked fluvial and tide-dominated estuarine deposits in high-frequency (fourth-order) sequences of the Eocene Central Basin, Spitsbergen

Eighteen coastal-plain depositional sequences that can be correlated to shallow- to deep-water clinoforms in the Eocene Central Basin of Spitsbergen were studied in 1 × 15 km scale mountainside exposures. The overall mud-prone (>300 m thick) coastal-plain succession is divided by prominent fluvial erosion surfaces into vertically stacked depositional sequences, 7–44 m thick. The erosion surfaces are overlain by fluvial conglomerates and coarse-grained sandstones. The fluvial deposits show tidal influence at their seaward ends. The fluvial deposits pass upwards into macrotidal tide-dominated estuarine deposits, with coarse-grained river-dominated facies followed further seawards by high- and low-sinuosity tidal channels, upper-flow-regime tidal flats, and tidal sand bar facies associations. Laterally, marginal sandy to muddy tidal flat and marsh deposits occur. The fluvial/estuarine sequences are interpreted as having accumulated as a series of incised valley fills because: (i) the basal fluvial erosion surfaces, with at least 16 m of local erosional relief, are regional incisions; (ii) the basal fluvial deposits exhibit a significant basinward facies shift; (iii) the regional erosion surfaces can be correlated with rooted horizons in the interfluve areas; and (iv) the estuarine deposits onlap the valley walls in a landward direction. The coastal-plain deposits represent the topset to clinoforms that formed during progradational infilling of the Eocene Central Basin. Despite large-scale progradation, the sequences are volumetrically dominated by lowstand fluvial deposits and especially by transgressive estuarine deposits. The transgressive deposits are overlain by highstand units in only about 30% of the sequences. The depositional system remained an estuary even during highstand conditions, as evidenced by the continued bedload convergence in the inner-estuarine tidal channels.     

Shoreface tongue geometry constrains history of relative sea-level fall: examples from Late Cretaceous strata in the Book Cliffs area, Utah

Progradational shoreface tongues preserve a near-complete depositional record of relative sea-level highstands, falls and lowstands. Two distinct styles of progradational shoreface tongue are examined in an extensive outcrop and subsurface dataset from Late Cretaceous strata of the Book Cliffs area, Utah, representing (i) highstand through attached lowstand progradation and (ii) highstand through detached lowstand progradation. Using this dataset, key geometrical attributes of the shoreface tongues and their internal facies architecture are identified and quantified that enable the reconstruction of relative sea-level fall history. For example, attached, wave-dominated lowstand shoreface deposits record a slow (0.2– 0.3 mm yr^–1), low-magnitude (> 14 m) relative sea-level fall punctuated by minor rises. Detached, weakly wave-influenced lowstand shoreface deposits record a more rapid (0.4–0.5 mm yr^–1), high-magnitude (> 45 m) relative sea-level fall synchronous with a marked change in sediment delivery and depositional process regime at the shoreline.     

Lower Carboniferous peritidal carbonates and associated evaporites adjacent to the Leinster Massif,southeast Irish Midlands

Analysis of a 275 m‐thick section in the Milford Borehole, GSI‐91‐25, from County Carlow, Ireland, has revealed an unusual sequence of shallow subtidal, peritidal and sabkha facies in rocks of mid?‐late Chadian to late Holkerian (Viséan, Lower Carboniferous) age. Sedimentation occurred on an inner ramp setting, adjacent to the Leinster Massif. The lower part of the sequence (late Chadian age) above the basal subtidal bioclastic unit is dominated by oolite sand facies associations. These include a lower regressive dolomitized, oolitic peloidal mobile shoal, and an upper, probably transgressive, backshoal oolite sand. A 68 m‐thick, well‐developed peritidal sequence is present between the oolitic intervals. These rocks consist of alternating stromatolitic fenestral mudstone, dolomite and organic shale, with evaporite pseudomorphs and subaerial exposure horizons containing pedogenic features. In the succeeding Arundian–Holkerian strata, transgressive–regressive carbonate units are recognized. These comprise high‐energy, backshoal subtidal cycles of argillaceous skeletal packstones, bioclastic grainstones with minor oolites and algal wackestones to grainstones and infrequent algal stromatolite horizons. The study recognizes for the first time the peritidal and sabkha deposits in Chadian rocks adjacent to the Leinster Massif in the eastern Irish Midlands. These strata appear to be coeval with similar evaporite‐bearing rocks in County Wexford that are developed on the southern margin of this landmass, and similar depositional facies exist further to the east in the South Wales Platform, south of St. George's Land, and in Belgium, south of the Brabant Massif. The presence of evaporites in the peritidal facies suggests that dense brines may have formed adjacent to the Leinster Massif. These fluids may have been involved in regional dolomitization of Chadian and possibly underlying Courceyan strata. They may also have been a source of high salinity fluids associated with nearby base‐metal sulphide deposits. Copyright © 2005 John Wiley & Sons, Ltd.     

Application of sequence and genetic stratigraphic concepts to Carboniferous coal-bearing strata: an example from the Black Warrior basin,USA

Carboniferous strata provide an excellent example on which to test the application of genetic stratigraphic and sequence stratigraphic concepts. Both approaches are employed in the evaluation of the coal-bearing strata of the Black Warrior basin, south-eastern USA. Bounding hiatal surfaces have been recognized in the succession of rock that includes the Mary Lee coal zone. Within the framework of genetic stratigraphy, one genetic sequence has been identified comprised of offlap (progradational and aggradational facies) and onlap (aggradational and transgressive facies) components. Seven parasequence sets have been delimited according to the concepts of sequence stratigraphy. These have been ascribed to transgressive, highstand and shelf margin systems tracts. The identification of components of these contrasting frameworks provide the basis for evaluating other Carboniferous strata. Correspondence to: R. A. Gastaldo     

四川盆地下侏罗统大安寨段高分辨率层序地层学

四川盆地下侏罗统大安寨段发育有41～47个短期、5个中期、2个长期基准面旋回。短期旋回有非对称和对称型两种旋回样式。由短期旋回叠加而成的中期旋回具有不同的堆积模式,分别代表低水位进积、湖侵加积-退积、湖泛加积、高水位早期加积-弱进积和晚期强烈进积小层序组。由中期旋回叠加组成的两个长期基准面半旋回分别代表大安寨期湖水位的长期上升和下降周期,并构成完整的湖进-湖退沉积旋回。通过各级基准面旋回转换点的等时地层对比建立的大安寨段层序地层格架,显示了储层、生油岩、盖层的分布规律与各级次基准面旋回的演化关系,此特征可作为储层预测和评价的重要依据之一。     

Sequence stratigraphy in the context of rapid regional uplift and high‐amplitude glacio‐eustatic changes: the Pleistocene Cutro Terrace (Calabria,southern Italy)

The Cutro Terrace is a mixed marine to continental terrace, where deposits up to 15 m thick discontinuously crop out in an area extending for ca 360 km² near Crotone (southern Italy). The terrace represents the oldest and highest terrace of the Crotone area, and it has been ascribed to marine isotope stage 7 (ca 200 kyr bp ). Detailed facies and sequence‐stratigraphic analyses of the terrace deposits allow the recognition of a suite of depositional environments ranging from middle shelf to fluvial, and of two stacked transgressive–regressive cycles (Cutro 1 and Cutro 2) bounded by ravinement surfaces and by surfaces of sub‐aerial exposure. In particular, carbonate sedimentation, consisting of algal build‐ups and biocalcarenites, characterizes the Cutro 1 cycle in the southern sector of the terrace, and passes into shoreface and foreshore sandstones and calcarenites towards the north‐west. The Cutro 2 cycle is mostly siliciclastic and consists of shoreface, lagoon‐estuarine, fluvial channel fill, floodplain and lacustrine deposits. The Cutro 1 cycle is characterized by very thin transgressive marine strata, represented by lags and shell beds upon a ravinement surface, and thicker regressive deposits. Moreover, the cycle appears foreshortened basinwards, which suggests that the accumulation of its distal and upper part occurred during forced regressive conditions. The Cutro 2 cycle displays a marked aggradational component of transgressive to highstand paralic and continental deposits, in places strongly influenced by local physiography, whereas forced regressive sediments are absent and probably accumulated further basinwards. The maximum flooding shoreline of the second cycle is translated ca 15 km basinward with respect to that of the first cycle, and this reflects a long‐term regressive trend mostly driven by regional uplift. The stratigraphic architecture of the Cutro Terrace deposits is the result of the interplay between regional uplift and high amplitude, Late Quaternary glacio‐eustatic changes. In particular, rapid transgressions, linked to glacio‐eustatic rises that outpaced regional uplift, favoured the accumulation of thin transgressive marine strata at the base of the two cycles. In contrast, the combined effect of glacio‐eustatic falls and regional uplift led to high‐magnitude forced regressions. The superposition of the two cycles was favoured by a relatively flat topography, which allowed relatively complete preservation of stratal geometries that record large shoreline displacements during transgression and regression. The absence of a palaeo‐coastal cliff at the inner margin of the terrace supports this interpretation. The Cutro Terrace provides a case study of sequence architecture developed in uplifting settings and controlled by high‐amplitude glacio‐eustatic changes. This case study also demonstrates how the interplay of relative sea‐level change, sediment supply and physiography may determine either the superposition of cycles forming a single terrace or the formation of a staircase of terraces each recording an individual eustatic pulse.     

Evolution of a carbonate delta generated by gateway‐funnelling of episodic currents

Cool‐water carbonate sedimentation has dominated Mediterranean shelves since the Early Pliocene. Skeletal sand and gravel herein consist of remains of heterozoan organisms, which are susceptible to reworking due to weak early cementation in non‐tropical waters. This study documents the Lower Pleistocene carbonate wedge of Favignana Island (Italy), which prograded from a 5   km wide passage between two palaeo‐islands into a perpendicular, 10 to 15   km wide strait between the palaeo‐islands at one side and Sicily at the other during the Emilian highstand (1·6   Ma to 1·1   Ma). The clinoformed carbonate wedge, which is 50   m thick and 6   km long, formed by east/south‐east progradation of a platform on the submarine sill by currents that were funnelled between the two palaeo‐islands. Platform‐slope clinoforms evolved from initial aggradation (thin and low‐angle) into a progradation phase (thick and high‐angle). Both clinoform types are characterized by a bimodal facies stacking pattern defined by sedimentary structures created by: (i) subaqueous dunes associated with dilute subcritical currents; and (ii) upper‐flow‐regime bedforms associated with sediment‐laden supercritical turbidity currents. Focusing of episodic currents on the platform by funnelling between the islands controlled the downstream formation of a sediment body, here named carbonate delta. The carbonate delta interfingers with subaqueous dune deposits formed in the perpendicular strait. This study uses a reconstruction of bedform dynamics to unravel the evolution of this gateway‐related carbonate accumulation.     

The Bashkirian Stage of Southwestern Darvaz, the Pamir Mountains: Stratigraphy and paleotectonics

Sections of the Bashkirian Stage of Southwestern Darvaz (the Pamir Mountains) are described. Based on fusulinids, the presence of all four Bashkirian substages was established. The Bashkirian beds transgressively overlie clastic-volcanic series of the Lower Carboniferous, and are conformably overlain by the Moscovian (Vereian). Upper Kashirian unconformably overlies both the Vereian beds and all earlier beds, up to of the Lower Carboniferous. An unconformity can be assumed within the Bashkirian, because the lower Bashkirian strata are missing from certain sections. The Bashkirian beds have no evidence of synsedimentary volcanism, which had completely ceased by the end of the Early Carboniferous. Fusulinids most characteristic of the Bashkirian substages are figured.     

Sequence stratigraphy with emphasis on platform-related parasequences of the Zechstein 2 carbonate (Ca2) – the northern platform margin of the Southern Permian Basin (NE Germany)

Facies analysis combined with sequence stratigraphic interpretation of the Upper Permian carbonate (Ca2) of NE Germany (i.e. northern basin margin of the Southern Permian Basin) confirm the existence of a rimmed platform with a steep and tectonically structured slope. The karstified A1 platform is overlain by deposits of a thin transgressive systems tract (TST) and a thick highstand systems tract (HST) which shows two larger-scale regressive shallowing-upwards cycles (4th order) with typical stacking patterns of small-scale cycles (5th order). The TST consists of bitumen-rich mudstones with reworked clasts of anhydrite and early cemented wacke- to grainstones, and it shows two, probably 5th-order, deepening-upwards cycles. The first larger-scale shallowing-up cycle on the Ca2 platform (4th-order) is dominated by aggradation of the bar and shoal deposits, whereas the second one is dominated by progradation. The tops of both cycles are characterised by erosional and exposure surfaces. Various types of small-scale shallowing-upwards cycles (5th-order) are observed in the bar, in the intertidal and in the algal-dominated supratidal environment, showing pronounced transgressive boundaries. On the slope and in the basin, equally thick TST and HST are observed. These incorporate carbonate turbidites which indicate "highstand shedding" from the platform. Various orders of relative sea-level variations are discussed. Controlling factors include tectonics, climate, and eustatic processes. A combined carbonate and evaporite sequence was found on the upper Ca2 slope, which may indicate a Ca2-lowstand systems wedge.     

塔中地区石炭系东河砂岩层序地层研究

东河砂岩是沉积于早海西期角度不整合面之上的第一套旋回性地层单元，它是由最底部的低水位体系域（ＬＳＴ）、海侵体系域（ＴＳＴ）及高水位体系域组成的Ⅰ类标准沉积层序，相当于三级海平面旋回的沉积地层。ＬＳＴ以缺失其早期的盆底扇、斜坡楔状体等为特征，仅发育其晚期的陆上河流充填沉积；ＴＳＴ中不发育凝缩层段，副层序在垂向上以弱退积至加积方式堆叠。一个完整的海平面相对升降旋回导致区内不同时期、不同地区的沉积体系及沉积特征不同。     

Depositional architecture and evolution of progradationally stacked lobe complexes in the Eocene Central Basin of Spitsbergen

The down‐dip portion of submarine fans comprises terminal lobes that consist of various gravity flow deposits, including turbidites and debrites. Within lobe complexes, lobe deposition commonly takes place in topographic lows created between previous lobes, resulting in an architecture characterized by compensational stacking. However, in some deep water turbidite systems, compensational stacking is less prominent and progradation dominates over aggradation and lateral stacking. Combined outcrop and subsurface data from the Eocene Central Basin of Spitsbergen provide a rare example of submarine fans that comprise progradationally stacked lobes and lobe complexes. Evidence for progradation includes basinward offset stacking of successive lobe complexes, a vertical change from distal to proximal lobe environments as recorded by an upward increase in bed amalgamation, and coarsening and thickening upward trends within the lobes. Slope clinoforms occur immediately above the lobe complexes, suggesting that a shelf‐slope system prograded across the basin in concert with deposition of the lobe complexes. Erosive channels are present in proximal axial lobe settings, whereas shallow channels, scours and terminal lobes dominate further basinward. Terminal lobes are classified as amalgamated, non‐amalgamated or thin‐bedded, consistent with turbidite deposition in lobe axis, off‐axis and fringe settings, respectively. Co‐genetic turbidite–debrite beds, interpreted as being deposited from hybrid sediment gravity flows which consisted of both turbulent and laminar flow phases, occur frequently in lobe off‐axis to fringe settings, and are rare and poorly developed in channels and axial lobe environments. This indicates bypass of the laminar flow phase in proximal settings, and deposition in relative distal unconfined settings. Palaeocurrent data indicate sediment dispersal mainly towards the east, and is consistent with slope and lobe complex progradation perpendicular to the NNW–SSE trending basin margin.