Sediment distribution and evolution of tidal deltas along a tide-dominated shoreline, Wachapreague, Virginia

Borings from the barrier island/lagoon system of the Eastern Shore of Virginia penetrated an unconformity which separates Pleistocene barrier island and offshore marine sediments from the overlying Holocene tidal delta and barrier island sediments. Offshore marine sediments and deposits within the flood-tidal delta (marsh, tidal flat-bay, inlet-mouth bar complex) are recognized on the basis of sediment color, composition, grain-size changes in the vertical sequence, presence of organic matter, and faunal suite. Subsurface data, historical records, and morphology of lateral accretion on barrier islands suggest that major inlets in the vicinity of Wachapreague have been relatively stable throughout Holocene time; they appear to be located where Pleistocene stream valleys previously existed. Holocene barrier islands apparently developed on drainage divide areas following post-Wisconsin transgression of the sea.

The initial phase of tidal delta development was characterized by vertically accreting, fan-shaped, inlet-mouth bars; tidal channels stabilized after bar crests had shoaled sufficiently for marsh to form. With landward progradation across the lagoon, sand-rich deposits graded laterally away from the inlets and vertically into clayey sand and silty clay of the tidal flat-bay and marsh environments.

Ebb inlet-mouth bars developed asymmetrically southward in response to littoral drift. Flood tidal deltas also built preferentially toward the south as indicated by: (1) sand distribution of the inlet-mouth bar complex; and (2) greater development of marsh south of the inlets.     

Evolution and stratigraphy of a regressive barrier/backbarrier complex: Kiawah Island, South Carolina

Analysis of 75 vibracores from the backbarrier region of Kiawah Island, South Carolina reveals a complex association of three distinct stratigraphic sequences. Beach ridge progradation and orientation-controlled backbarrier development during the evolution of Kiawah Island, and resulted in deposition of: (1) a mud-rich central backbarrier sequence consisting of low marsh overlying fine-grained, tidal flat/lagoonal mud; (2) a sandy beach-ridge swale sequence consisting of high and low marsh overlying tidal creek channel and point bar sand, and foreshore/shoreface; and (3) a regressive sequence of sandy, mixed, and muddy tidal flats capped by salt marsh that occurs on the updrift end of the island. Central backbarrier deposits formed as a result of the development of the initial beach ridge on Kiawah Island. Formation of this beach ridge created a backbarrier lagoon in which fine-grained estuarine and tidal flat mud accumulated. Washovers, oyster mounds, and tidal creek deposits form isolated sand and/or shell-rich lenses in the lagoon. Spartina alterniflora low marsh prograded into the lagoon as the tidal flats aggraded. Barrier progradation and sediment bar-bypassing at Stono Inlet created digitate beach ridges on the northeast end of Kiawah Island. Within the beach-ridge swales, tidal flats were disconformably deposited on shoreface and foreshore sand of the older beach ridges. Tidal creek drainage systems evolved to drain the swales. These rapidly migrating creeks reworked the tidal flat, foreshore, and shoreface sediments while redepositing a fining-upward sequence of channel lag and point bar deposits, which served as a substrate for salt marsh colonization. This resultant regressive sedimentary package marks the culmination of barrier island development and estuary infilling. Given enough time and sedimentation, the backbarrier sequence will ultimately prograde over the barrier island, reworking dune, beach, and foreshore sediments to form the upper sand-rich bounding surface of the barrier lithosome. Preservation of the regressive sequence is dependent upon sediment supply and the relative rate of sea-level rise, but the reworking of barrier islands by tidal inlets and migrating tidal creeks greatly alter and complicate the stratigraphic sequence.     

Aeolian stratification and facies association in desert sediments, Arran basin (Permian), Scotland

ABSTRACT Permian aeolian sediments on the island of Arran are divisible into dune (including draa) and interdune deposits. Both types display a distinctive and unusually wide variation in grain size. The dominant features of the dune deposits are grainfall lamination, sandflow lamination, and inverse graded lamination associated with ripple-form lamination and normal graded lamination. The flat-lying aeolian interdune deposits are characterised by granule and sand ripples, horizontal lamination in coarse sand and granules, plane bed lamination and inverse graded lamination. Associated structures include ripple-form lamination and deflation lags. Three types of trace fossil associated with completely bioturbated horizons occur in some low-angle dune and interdune deposits.
The aeolian facies interfinger with alluvial fan deposits giving rise to three recognizable facies belts. Marginal aeolian deposits are associated with fluvial conglomerates and are dominated by interdune deposits and occasionally very thin barchan deposits (set height 3-37 cm). Intermediate aeolian deposits are characterized by interbedded crescentic dune, small draa (dune set height 5 cm-4.5 m) and interdune deposits, and rare fluvial and lake sediments. Basinal aeolian deposits are dominated by draa deposits (dune set height 0.2-28 m) associated with rare interdune sediments. Transverse dunes and draas were moved by north-eastern palaeowinds towards the foot of the alluvial fans. The aeolian sediments were deposited in a fault-bounded desert basin.     

Sedimentology, stratigraphy and landscape evolution of a Holocene coastal dune system, Lodbjerg, NW Jutland, Denmark

The stratigraphy and landscape evolution of the Lodbjerg coastal dune system record the interplay of environmental and cultural changes since the Late Neolithic. The modern dunefield forms part of a 40 km long belt of dunes and aeolian sand‐plains that stretches along the west coast of Thy, NW Jutland. The dunefield, which is now stabilized, forms the upper part of a 15–30 m thick aeolian succession. The aeolian deposits drape a glacial landscape or Middle Holocene lake sediments. The aeolian deposits were studied in coastal cliff exposures and their large‐scale stratigraphy was examined by ground‐penetrating radar mapping. The contact between the aeolian and underlying sediments is a well‐developed peaty palaeosol, the top of which yields dates between 2300 BC and 600 BC . Four main aeolian units are distinguished, but there is some lateral stratigraphic variation in relation to underlying topography. The three lower aeolian units are separated by peaty palaeosols and primarily developed as 1–4 m thick sand‐plain deposits; these are interpreted as trailing edge deposits of parabolic dunes that moved inland episodically. Local occurrence of large‐scale cross‐stratification may record the head section of a migrating parabolic dune. The upper unit is dominated by large‐scale cross‐stratification of various types and records cliff‐top dune deposition. The nature of the aeolian succession indicates that the aeolian landscape was characterized by alternating phases of activity and stabilization. Most sand transported inland was apparently preserved. Combined evidence from luminescence dating of aeolian sand and radiocarbon dating of palaeosols indicates that phases of aeolian sand movement were initiated at about 2200 BC , 700 BC and AD 1100. Episodes of inland sand movement were apparently initiated during marked climate shifts towards cooler, wetter and more stormy conditions; these episodes are thought to record increased coastal erosion and strong‐wind reworking of beach and foredune sediments. The intensity, duration and areal importance of these sand‐drift events increased with time, probably reflecting the increasing anthropogenic pressure on the landscape. The formation of the cliff‐top dunes after AD 1800 records the modern retreat of the coastal cliffs.     

障壁岛—潟湖沉积特征及模式:以美国普拉姆岛上更新统—全新统为例*

普拉姆岛(Plum island)是美国东北部缅因湾最大的障壁海岸,岛内向陆一侧为新英格兰地区最大潟湖和沼泽区,它们是晚第四纪末次冰期冰川作用和冰后期海岸作用的沉积响应。通过普拉姆岛研究区上更新统—全新统160个钻孔描述,识别出8种沉积物: 泥炭、冰川黏土、黏土、粉砂、细砂、中粗砂、砾、坠石。根据沉积物类型及其组合特征,结合沉积环境,共划分出8种沉积微相: 障壁沙丘、滨岸沙、水下临滨沙、河道、潮汐水道、潟湖、潮坪、沼泽。研究区在晚第四纪末次冰盛期(MIS2)被劳伦斯蒂德冰盖(Laurentide Ice Sheet)覆盖,发育冰川地貌,冰川泥覆盖在基岩之上,形成底层沉积; 冰后期(MIS1),冰盖消融,海平面发生变化,在冰川地貌鼓丘附近形成沙坝,最终沉积演化为障壁岛—潟湖环境,潟湖通过潮汐水道与广海相连通。     

Porosity preservation due to grain coating illite/smectite: Evidence from Buchan Formation (Upper Devonian) of the Ardmore Field,UK North Sea

The Buchan Formation sandstone reservoirs from the Ardmore Field in the UK Central North Sea are fluvial-aeolian deposits and provide examples of porosity preservation in deeply-buried reservoirs (2.7–3.2?km) caused by grain-coating illite/smectite (I/S). Here, high reservoir quality commonly correlates with the occurrence of grain-coating I/S and consequent inhibition of quartz cementation in the aeolian dune and interdune sandstones. Porosity is lower in fluvial sandstones lacking grain coating I/S but with intense quartz overgrowths. We propose that the presence of I/S reflects concentration of the smectitic-rich clay bearing water which would have been the deposits of the interdune and/or distal sector of fluvial distributary system, and were introduced into aeolian deposits by mechanical infiltration. Petrographic relationships indicate that these coatings grew mainly before the mechanical compaction as the clays occur at grain contacts. The use of empirical model suggested that about 6–7% porosity have been preserved. The burial-thermal history of the Ardmore area contributed to the high quality reservoir because throughout much of the time since deposition, the Devonian sandstones have been little buried. Only from the Palaeogene the reservoir temperatures exceeded about 70?°C and rapidly buried to today’s maximum depth, which have minimized the negative effect generally ascribed to smectitic clays on reservoir quality. The circumstances of porosity preservation shown in this study may be unusual, but nonetheless have profound consequences for exploration. It is possible to identify new Buchan Formation prospects in areas hitherto dismissed because they were generally assumed to be poor reservoir.     

Spatial and temporal evolution of a terminal fluvial fan system: the Permian Organ Rock Formation, South-east Utah, USA

The recognition of terminal fluvial systems, otherwise termed 'terminal fans' or 'distributary fluvial fan systems', preserved in the ancient rock record is based primarily on the recognition of facies characteristics indicative of a progressive downstream decrease in: (i) fluvial discharge; (ii) channel depth and width; (iii) lateral and vertical connectivity of channel-fill elements; and (iv) evidence for channellized flow and a systematic increase in: (i) evidence for sheetflood deposition; (ii) aeolian and/or playa deposits; and (iii) channel bifurcation. However, despite these criteria having been applied previously to a variety of outcrop successions, there is still no unifying facies model that adequately accounts for the complex stratigraphic architectural relationships expected for such systems, based on the varied styles of fluvial activity and system interaction known from modern examples. Moreover, few previous studies have given significant consideration to the long-term temporal evolution of terminal fluvial fans. These issues are addressed by this study of the Permian (Leonardian/Artinskian) Organ Rock Formation of the Paradox Basin, South-east Utah. A detailed stratigraphic framework based on 84 sedimentary logs demonstrates proximal to distal variations in sedimentary style. Integration of these data with high-resolution architectural panels depicting the geometry and facies characteristics of individual fluvial elements has enabled the development of a series of depositional models that account for both the spatial and temporal evolution of the system and which are representative of: (i) initial progradation of the fluvial system into the Paradox foreland basin; (ii) retreat of the fluvial system and expansion of a distal aeolian dune system; (iii) the final phase of fluvial progradation following aeolian dune deflation; and (iv) the final retrogradation of the fluvial system back towards the hinterland.     

Bedform and stratification characteristics of some modern small-scale washover sand bodies

Washover sand bodies commonly develop along microtidal coastlines in beach/barrier island or spit settings. Wave runup, usually in conjunction with an abnormally high water level, may overtop the most landward berm of the beach and the foredune crest, if one exists, to produce overwash and subsequent runoff across the more landward subaerial surface. Two main elements of the resulting deposit are the washover fan and runoff channel. Newly formed, small-scale washover deposits were examined along the Outer Banks, North Carolina, near Pt Mugu, California, and at Presque Isle (Lake Erie), Pennsylvania. The fans were formed in response to unidirectional landward transport, and the runoff channels in response to unidirectional flow usually in a landward direction, but sometimes in shore-parallel then seaward direction. Where overwash carried across the fan surface and entered a pond or lagoon, a small-scale delta (microdelta) developed. In this case, the washover fan consisted of two subfacies, the wetted, but ‘subaerial’ part of the fan and the subaqueous washover delta. Flow associated with the development of the fan and runoff channel produced distinctive sets of bedforms and internal stratification. High velocity discontinuous surges moving across the fan surface resulted in the development of a plane bed and subhorizontal to low-angle (landward dipping) planar stratification which comprised the major part of the fan. Similarly, rhomboid forms were produced by high velocity sheet flow across the fan surface. Where flow carried into a standing body of water, delta-type foreset strata developed. For this case, the lateral structural sequence was subhorizontal, planar stratification merging landward into landward dipping, delta (tabular) foreset strata. In the runoff setting, where flow became channelized and continuous, both upper-flow and lower-flow regime currents were typical. Upper-flow regime bedforms included antidunes, standing waves, and plane beds. The most commonly observed lower-flow regime bedforms included microdelta-like bars, low-amplitude bars, linguoid ripples, and sinuous-crested current ripple trains. The sets of sedimentary structures comprising modern washover sand bodies provide criteria for the identification of similar deposits in ancient sediments and for more specific interpretation of the environment.     

Geomorphic evolution and stratigraphy of Price and Capers Inlets, South Carolina

A three-dimensional model for a tidal inlet-barrier island depositional system was constructed through examination of 37 vibracores and 10 auger drill holes on Capers and Dewees Islands, South Carolina. Two cycles of southerly inlet migration and subsequent abandonment resulted in beach ridge truncation on the northern ends of both barriers. Historical evidence indicates that these tidal inlets migrated 1.5 km to the south owing to a dominant north-south longshore transport direction. The hydraulic inefficiency of these over-extended inlet channels caused shorter, more northerly-oriented channels to breach through the ebbtidal deltas. After inlet reorientation, large wave-formed swash bars migrated landward closing former inlet channels. Weakened tidal currents through the abandoned channels permitted clay plugs to form thick impermeable seals over active channel-fill sand and shell. Price and Capers Inlets formed during the onset of the Holocene transgression following submergence of the ancestral Plio-Pleistocene Santee River drainage system. Coarse, poorly sorted inlet-deposited sand disconformably overlies Pleistocene estuarine clay and is capped by a dense clay plug. Shoreline reorientation and landward retreat of a primary barrier island chain occurred between the first and second cycles of inlet-channel migration and abandonment. Beach ridges prograded seaward over the first inlet sequence. A second cycle of inlet migration truncated the northernmost portion of these beach ridges and scoured into the clay plug of the earlier inlet deposit. Abandonment of this channel resulted in deposition of a second abandoned inlet-channel clay plug. Abandoned tidal inlet channels exhibit U-shaped strike and crescentic- to wedge-shaped dip geometries. Basal, poorly sorted inlet sands are sealed beneath impermeable, abandoned-channel silt and clay, washover deposits, and salt marsh. Multiple episodes of inlet migration and abandonment during a rising sea-level deposited stacked inlet-fill sequences within the barrier islands. The resultant stratigraphy consists of interlayered, fining-upward, active inlet-fill sand overlain by thicker abandoned inlet-fill clay plugs. These clay plugs form impermeable zones between adjacent barrier island sand bodies. Shoreline transgression would remove the uppermost barrier island deposits, sealing the inlet-fill sequences between Pleistocene estuarine clay and shoreface to shelf silt and clay.     

Correlations between Holocene flood tidal delta and barrier island inlet fill sequences: Back Sound-Shackleford Banks, North Carolina

Large, well-developed flood tidal deltas on a barrier island coastline generally indicate a wave-dominated, microtidal sedimentary regime. Vibracores in a lagoon behind the barrier island Shackleford Banks, North Carolina contain an upward fining sequence of coarse-medium, very shelly sand, medium-fine laminated sand, fine-very fine cross-laminated sand and marsh mud. This sequence is interpreted as being a flood tidal delta deposit based on analogy with modern flood tidal delta sediments and represents lagoonal deposition in response to a migrating or closing inlet. The sand facies defined in lagoonal vibracores is found to be continuous beneath a lagoonal marsh and correlative with inlet sections identified in Shackleford Banks drill holes. The correlation of flood tidal delta deposits with inlet sequences in this microtidal environment indicates a close relationship between barrier and backbarrier inlet controlled sedimentation.     

Lower Silurian transgressive barrier islands, southwest Wales

Barrier islands developed on the southeastern flanks of a volcanic terrain during the Lower Silurian transgression of southwest Wales. The barriers are preserved in transgressive sequences overlying basalts and comprising from base upwards: lagoon→barrier island→offshore marine sediments. The thickness of the barrier island sediments varies from 5 m to 28 m. Comparison with modern barriers suggests that the thin sequences result from narrow (<2 km), steadily transgressing barrier islands, whereas the thicker sequences represent broad (2–4 km), slowly transgressing forms. In one case the barrier became narrower as the rate of migration accelerated in response to decreased fluviatile sediment supply caused by rising sea-level. Despite the high preservation potential of inlet fill deposits, the latter are generally absent in these Silurian barriers because inlet migration was slow compared with the rate of barrier retreat. Possibly much shell material was dissolved during early diagenesis.     

Stacked fluvial and tide-dominated estuarine deposits in high-frequency (fourth-order) sequences of the Eocene Central Basin, Spitsbergen

Eighteen coastal-plain depositional sequences that can be correlated to shallow- to deep-water clinoforms in the Eocene Central Basin of Spitsbergen were studied in 1 × 15 km scale mountainside exposures. The overall mud-prone (>300 m thick) coastal-plain succession is divided by prominent fluvial erosion surfaces into vertically stacked depositional sequences, 7–44 m thick. The erosion surfaces are overlain by fluvial conglomerates and coarse-grained sandstones. The fluvial deposits show tidal influence at their seaward ends. The fluvial deposits pass upwards into macrotidal tide-dominated estuarine deposits, with coarse-grained river-dominated facies followed further seawards by high- and low-sinuosity tidal channels, upper-flow-regime tidal flats, and tidal sand bar facies associations. Laterally, marginal sandy to muddy tidal flat and marsh deposits occur. The fluvial/estuarine sequences are interpreted as having accumulated as a series of incised valley fills because: (i) the basal fluvial erosion surfaces, with at least 16 m of local erosional relief, are regional incisions; (ii) the basal fluvial deposits exhibit a significant basinward facies shift; (iii) the regional erosion surfaces can be correlated with rooted horizons in the interfluve areas; and (iv) the estuarine deposits onlap the valley walls in a landward direction. The coastal-plain deposits represent the topset to clinoforms that formed during progradational infilling of the Eocene Central Basin. Despite large-scale progradation, the sequences are volumetrically dominated by lowstand fluvial deposits and especially by transgressive estuarine deposits. The transgressive deposits are overlain by highstand units in only about 30% of the sequences. The depositional system remained an estuary even during highstand conditions, as evidenced by the continued bedload convergence in the inner-estuarine tidal channels.     

Fluvial-aeolian interactions: Part II, ancient systems

An understanding of fluvial-aeolian deposition derived from modern case-examples in a previous study is applied to the Permian Cutler Formation and Cedar Mesa Sandstone on the Colorado Plateau. These formations supply an excellent three-dimensional exposure of intertonguing fluvial and aeolian strata. Four distinct facies associations form the bulk of the Cutler Formation and Cedar Mesa Sandstone: (1) aeolian dune deposits; (2) wet interdune deposits; (3) fluvial channel deposits; and (4) overbank-interdune deposits. In addition, two distinctive types of erosion surfaces are found within the Cutler Formation and Cedar Mesa Sandstone: pebble- to granule-rich erosion surfaces (aeolian deflation surfaces) and flood surfaces. Fluvial and aeolian intertonguing result in extensive tabular sheets of aeolian sandstone separated by flood surfaces and overbank-interdune deposits. Fluvial channels are associated with the deposits overlying flood surfaces and are incised into the underlying aeolian sandstones. Overbank-interdune deposits and wet interdune deposits cover flood surfaces and intertongue with overlying aeolian sandstones. The primary characteristics of ancient fluvial-aeolian deposition are overbank-interdune deposits and pronounced extensive erosion surfaces (flood surfaces), which are parallel to underlying fluvial sandstones and thus trend parallel to the palaeoslope and palaeohydrological gradient.     

鄂尔多斯盆地东缘大宁—吉县地区山西组页岩岩相与沉积相特征

以鄂尔多斯盆地东缘大宁—吉县地区二叠系山西组为研究对象,综合应用岩心、薄片及测井资料,开展山32亚段岩相类型、岩相组合和沉积相研究,研究结果表明:山32亚段包括粉砂质泥岩/页岩相、纹层状层理含粉砂泥岩/页岩相、透镜状层理粉砂质泥岩/页岩相、钙质页岩相、煤层、碳质页岩相、黑色页岩相、波状层理泥质粉砂岩相、交错层理中—细砂...     

Sedimentology and stratigraphy of a transgressive, muddy gravel beach: Waterside Beach, Bay of Fundy, Canada

Sediments exposed at low tide on the transgressive, hypertidal (>6 m tidal range) Waterside Beach, New Brunswick, Canada permit the scrutiny of sedimentary structures and textures that develop at water depths equivalent to the upper and lower shoreface. Waterside Beach sediments are grouped into eleven sedimentologically distinct deposits that represent three depositional environments: (1) sandy foreshore and shoreface; (2) tidal‐creek braid‐plain and delta; and, (3) wave‐formed gravel and sand bars, and associated deposits. The sandy foreshore and shoreface depositional environment encompasses the backshore; moderately dipping beachface; and a shallowly seaward‐dipping terrace of sandy middle and lower intertidal, and muddy sub‐tidal sediments. Intertidal sediments reworked and deposited by tidal creeks comprise the tidal‐creek braid plain and delta. Wave‐formed sand and gravel bars and associated deposits include: sediment sourced from low‐amplitude, unstable sand bars; gravel deposited from large (up to 5·5 m high, 800 m long), landward‐migrating gravel bars; and zones of mud deposition developed on the landward side of the gravel bars. The relationship between the gravel bars and mud deposits, and between mud‐laden sea water and beach gravels provides mechanisms for the deposition of mud beds, and muddy clast‐ and matrix‐supported conglomerates in ancient conglomeratic successions. Idealized sections are presented as analogues for ancient conglomerates deposited in transgressive systems. Where tidal creeks do not influence sedimentation on the beach, the preserved sequence consists of a gravel lag overlain by increasingly finer‐grained shoreface sediments. Conversely, where tidal creeks debouch onto the beach, erosion of the underlying salt marsh results in deposition of a thicker, more complex beach succession. The thickness of this package is controlled by tidal range, sedimentation rate, and rate of transgression. The tidal‐creek influenced succession comprises repeated sequences of: a thin mud bed overlain by muddy conglomerate, sandy conglomerate, a coarse lag, and capped by trough cross‐bedded sand and gravel.     

Fluvial-aeolian interactions: Part I, modern systems

Two modern fluvial-aeolian depositional systems (Great Sand Dunes National Monument, Colorado and the Mojave River Wash, California) are remarkably similar in spite of different climates, sizes, fluvial sediment textures, and relative directions of aeolian and fluvial transport. Dune growth and migration, and deflation of blowouts create 8–10 m of local relief in unflooded aeolian landscapes. There are six prominent fluvial-aeolian interactions. (1) Fluvial flow extends into the aeolian system until it is dammed by aeolian landforms; (2) interdune areas (overbank-interdunes) upstream of aeolian dams, and alongside channels are flooded; (3) water erodes dunes alongside channels and interdunes; (4) flood waters deposit sediment in interdune areas; (5) fluvially derived groundwater floods interdunes (interdune-playas); (6) wind erodes fluvial sediment and redeposits it in the aeolian system. Unique and characteristic sediments are deposited in overbank-interdunes and in interdune-playas, reflecting alternate fluvial and aeolian processes and rapidly changing flow and salinity conditions. These fluvial-aeolian interdune deposits are characterized by irregular, concave-up bases and flat upper surfaces containing mudcracks or evaporite cement. Characteristic low-relief surfaces form in aeolian systems as an effect of flooding. Fluvial deposits are resistant to aeolian deflation. Aeolian sand is preserved when flood sediments are deposited around the bases of the dunes. Thus repetitive fluvial and aeolian aggradation tends to be ‘stepwise’ as interdune floors are suddenly raised during floods. The effects of flooding should be easy to recognize in ancient aeolianites, even beyond the area covered with overbank muds.     

Late-Quaternary paleoenvironmental evolution of Lesina lagoon (southern Italy) from subsurface data

Integrated sedimentological and micropaleontological (foraminifers and ostracods) analyses of two 55 m long borehole cores (S3 and S4) drilled in the subsurface of Lesina lagoon (Gargano promontory—Italy) has yielded a facies distribution characteristic of alluvial, coastal and shallow-marine sediments. Stratigraphic correlation between the two cores, based on strong similarity in facies distribution and AMS radiocarbon dates, indicates a Late Pleistocene to Holocene age of the sedimentary succession.Two main depositional sequences were deposited during the last 60-ky. These sequences display poor preservation of lowstand deposits and record two major transgressive pulses and subsequent sea-level highstands. The older sequence, unconformably overlying a pedogenized alluvial unit, consists of paralic and marine units (dated by AMS radiocarbon at about 45–50,000 years BP) that represent the landward migration of a barrier-lagoon system. These units are separated by a ravinement surface (RS1). Above these tansgressive deposits, highstand deposition is characterised by progradation of the coastal sediments.The younger sequence, overlying an unconformity of tectonic origin, is a 10 m-thick sedimentary body, consisting of fluvial channel sediments overlain by transgressive–regressive deposits of Holocene age. A ravinement surface (RS2), truncating the transgressive (lagoonal and back-barrier) deposits in core S4, indicates shoreface retreat and landward migration of the barrier/lagoon system. The overlying beach, lagoon and alluvial deposits are the result of mid-Holocene highstand sedimentation and coastal progradation.     

A stratigraphic model to account for complexity in aeolian dune and interdune successions

Wet aeolian systems, in which the water table or its capillary fringe are in contact with the accumulation surface, such that moisture influences sedimentation, are well‐known from modern aeolian systems and several ancient preserved successions are recognized from outcrop. One common mechanism by which accumulation of wet aeolian system deposits occurs is via a progressive rise in the relative water‐table level that is coincident with ongoing dune and interdune migration, the angle of dune climb being determined by the ratio between the rate of relative water‐table rise and the rate of downwind migration of the bedforms. Accumulations of wet aeolian system deposits tend to be characterized by units of climbing dune strata separated by units of damp or wet interdune strata. For simple geometric configurations, where the size of the dune and interdune units, the rate of bedform migration and the rate of aggradation all remain constant over space and time, the resulting accumulation has a simple architecture characterized by sets of uniform thickness inclined at a constant angle. However, the dynamic nature of most aeolian dune systems means that such simple configurations are unlikely in nature. The complexity inherent in these systems is accounted for here by a numerical model in which key controlling parameters, including dune and interdune wavelength and spacing, migration rate and aggradation rate, are allowed to vary systematically both spatially (from a dune‐field centre to its margin) and temporally (in response to changes in sediment availability or water‐table level). The range of synthetic stratigraphic architectures generated by the model accounts for all the best‐known examples of aeolian dune and interdune stratigraphic configurations documented from the stratigraphic record. Modelling results have enabled the erection of a scheme for the classification of dune system type whereby the many elaborate stratal architectures known to exist in nature can effectively be accounted for by only four parameters that are allowed to vary over space and time: dune and interdune wavelength and spacing, rate of bedform migration and rate of accumulation. Results have applied implications, including the modelling of reservoir heterogeneity and the prediction of fluid flow pathways of hydrocarbons, water, CO₂ and contaminants in subsurface reservoirs and aquifers, in which low permeability interdune units might act as baffles or barriers.     

Textural trend analysis of coastal barrier sediments along the Middle Atlantic Bight,North Carolina

Comparative polynomial trend analyses of textural parameters were conducted on adjacent foreshore, berm, and dune sediment populations along a coastal barrier chain of the Middle Atlantic Bight. The analyses indicate that systematic textural patterns exhibited by the barrier sediments consist of both regional trends and local cyclicity.The regional trends appear to reflect progressive variability of both the hydraulic and aeolian regimes. Variability of the hydraulic regime consists of a progressive southward increase in average wave energy, with a concomitant decrease in energy consistency; this is attributed to the coastal wave refraction pattern, and to a progressive southward decrease in shelf width. The aeolian regime is characterized by a constant average energy level along the barrier chain, but exhibits a progressive northward decrease in wind energy consistency, and a corresponding increase in winnowing efficiency. Local cyclicity along the barrier appears to reflect textural variations in the barrier source materials excavated from a heterogeneous Pleistocene substrate. The cyclic patterns suggest the presence of a buried ancestral Albemarle fluvial channel near the present mouth of Albemarle Sound.In developing systematic textural variations along the barrier, size characteristics of the source material appear to be the most influential factor, while the influences of both the hydraulic and aeolian regimes are subordinate. The berm and dune field environments are most amenable to the development of systematic variation, while the foreshore is most susceptible to random component variation.     

Ancient Martian aeolian processes and palaeomorphology reconstructed from the Stimson formation on the lower slope of Aeolis Mons,Gale crater,Mars

Reconstruction of the palaeoenvironmental context of Martian sedimentary rocks is central to studies of ancient Martian habitability and regional palaeoclimate history. This paper reports the analysis of a distinct aeolian deposit preserved in Gale crater, Mars, and evaluates its palaeomorphology, the processes responsible for its deposition, and its implications for Gale crater geological history and regional palaeoclimate. Whilst exploring the sedimentary succession cropping out on the northern flank of Aeolis Mons, Gale crater, the Mars Science Laboratory rover Curiosity encountered a decametre‐thick sandstone succession, named the Stimson formation, unconformably overlying lacustrine deposits of the Murray formation. The sandstone contains sand grains characterized by high roundness and sphericity, and cross‐bedding on the order of 1 m in thickness, separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops. The cross‐beds are composed of uniform thickness cross‐laminations interpreted as wind‐ripple strata. Cross‐sets are separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops that are interpreted as dune migration surfaces. Grain characteristics and presence of wind‐ripple strata indicate deposition of the Stimson formation by aeolian processes. The absence of features characteristic of damp or wet aeolian sediment accumulation indicate deposition in a dry aeolian system. Reconstruction of the palaeogeomorphology suggests that the Stimson dune field was composed largely of simple sinuous crescentic dunes with a height of ca 10 m, and wavelengths of ca 150 m, with local development of complex dunes. Analysis of cross‐strata dip azimuths indicates that the general dune migration direction and hence net sediment transport was towards the north‐east. The juxtaposition of a dry aeolian system unconformably above the lacustrine Murray formation represents starkly contrasting palaeoenvironmental and palaeoclimatic conditions. Stratigraphic relationships indicate that this transition records a significant break in time, with the Stimson formation being deposited after the Murray formation and stratigraphically higher Mount Sharp group rocks had been buried, lithified and subsequently eroded.