Fidelity of ocean bottom seismic observations

The often poor quality of ocean bottom seismic data, particularly that observed on horizontal seismometers, is shown to be the result of instruments responding to motions in ways not intended. Instruments designed to obtain the particle motion of the ocean bottom are found to also respond to motions of the water. The shear discontinuity across the ocean floor boundary results in torques that cause package rotation, rather than rectilinear motion, in response to horizontal ground or water motion. The problems are exacerbated by bottom currents and soft sediments. The theory and data presented in this paper suggest that the only reliable way of obtaining high fidelity particle motion data from the ocean floor is to bury the sensors below the bottom in a package with density close to that of the sediment. Long period signals couple well to ocean bottom seismometers, but torques generated by bottom currents can cause noise at both long and short periods. The predicted effects are illustrated using parameters appropriate for the operational OBS developed for the U. S. Office of Naval Research. Examples of data from ocean bottom and buried sensors are also presented.     

Depth dependence of noise resulting from ship traffic and wind

Under conditions of distantly generated noise, the noise level is found to decrease with depth in the mid-northeastern Pacific. These data show a decrease in noise level greater than 25 dB between critical depth and the ocean bottom. A result of this decrease is that locally wind-generated noise can be detected on near-bottom receivers for wind speeds less than 10 kn. It is shown that the noise level generated form local sources such as wind and nearby shipping is almost independent of receiver depth. The differences in spectra shape between the distant shipping noise and wind-generated noise and the low noise levels detected near the ocean bottom allow the measurement in the frequency band at 200-500 Hz of local wind noise level for wind speeds less than 10 kn     

On the nature of microshocks recorded by ocean bottom seismographs

The results of the study of short impulsive signals (microshocks) which constitute a specific type of noise on the records of ocean bottom seismographs are given. Various possible causes of their origin have been analysed. It is shown that the great majority of microshocks are produced by external causes: bottom displacements under an instrument at the deployment site and the mechanical action of marine organisms on OBSs. To cope with this kind of noise the use of parallel recording at two seismometers some distance apart is suggested.     

The estimation of ocean bottom seismographs' coupling characteristics by means of microshock recordings

A transient technique was used for estimating the bottom-instrument response function in experiments with bottom seismographs (OBS) in deep ocean. The sharp mechanical impacts on bottom seismograph usually induced by bottom displacements under the instrument (microshocks) are suggested as rough analogues of the impulses for the bottom-instrument system transient calibration. It has been found that microshocks has usually sufficiently small duration to be used for coupling characteristics estimates. Test measurements have shown that in many cases this method makes it possible to distinguish spectral features characterising earthquakes and seismic noise wavetrains from those which are caused by coupling resonances of the OBS-sediment inter-face.     

An overview and general results of the Lopez island OBS experiment

The purpose of the experiment was to determine the effects of coupling and bottom currents on ocean bottom seismometers. Twelve operational OBSs, three specially designed three-component systems, and a hydrophone were compared with each other. Unlike seismometers placed on hard rock at land stations, ocean bottom seismometers can be affected by soft sediments (which act as lossy mechanical springs) and by buoyancy. Coupling through soft sediments can modify the response to ground motion much as a low pass filter does, and high buoyancy tends to counteract this effect. These effects are observed in the Lopez data, which consist of signals from mechanical transient tests, cap shots, airgun pulses, and general background noise. The modification of response is pronounced for some instruments and barely noticeable in others. Instruments that stand high in the water relative to their base width tend to be susceptible to rocking motion that shows up as a mechanical cross coupling between horizontal and vertical motion. Correlation of Lopez results with coupling theory suggests that it is possible to design ocean bottom seismometers that will couple well to any sediment. Current levels at the Lopez site (<5 cm s^-1) were too small to produce noticeable effect on any of the instruments; however, the same design criteria that will minimize coupling problems will also lessen problems caused by ocean currents.Hawaii Institute of Geophysics Contribution No. 1171.     

underwThe Hawaii-2 Observatory seismic system

The Hawaii-2 Observatory seismic system is currently transmitting high-quality seismic data from the ocean floor in the central NE Pacific Ocean through Hawaii to the IRIS Data Management Center. The system includes broad-band seismic, geophone, acoustic, and ocean current sensors. The seismic sensors are buried about 0.4 m below the ocean floor to improve coupling to the ocean bottom and to reduce noise levels. The system can be remotely calibrated, leveled and locked, and gains can be changed on command from shore. Data are temporarily stored in the seismic package for retransmission as needed to correct for transmission problems and to prevent loss of data. Data generated are valuable for studies of the Earth's structure and the dynamics of earthquakes     

Precise optical path length measurement through an optical fiber: Application to seafloor strain monitoring

An optical fiber strainmeter intended for measuring tectonic strains on the seafloor is under development. In this instrument, an optical fiber is stretched between two points fixed to the ocean bottom; relative displacement of these points causes a change in the elongation of the fiber. This associated change in optical path length is monitored by an electronic distance meter. The dominant sources of noise in determining the optical path length of the fiber stem from the dependence of the fiber's index of refraction on both wavelength and temperature. In a 50 day long experiment performed in the shallow ocean, a test fiber was installed along a 210 m long baseline on the bottom. The RMS variation in length was 5 mm except for two displacements of order 10 cm caused by known effects.     

Measurement of tsunamis in the open ocean

Abstract

The spectrum of long waves, which are a background to tsunamis, is analyzed on the basis of records of near‐bottom pressure sensors obtained in the Northwest Pacific during the first and second USA‐USSR expeditions on the investigation of tsunamis in the open ocean (1975 and 1978). Instrumental trends, tidal oscillations, and quasistationary longwave noise were contained in the records. Special filters were used to pick out small waves generated by the seismicity of the ocean bottom. A decrease of noise level from 10² cm (including tides) to 10°¹ cm could be reached. The level of long‐wave noise is found to depend on the instrument's location. Minimal disturbances in the records were observed at stations situated on the edge of the continental slope. The influence of cyclones passing over the instrument's site is deduced. It shows an increase in noise level on Nyquist frequency (0.5 min°¹), which possibly is caused by the action of swell generated by the cyclone. Seismicity of the region under investigation for the second expedition (August‐October 1978) is described, and the recurrence of tsunamis is estimated, including microtsunamis. Taking into account this analysis, records were filtered and sections corresponding to probable arrivals of tsunamis from most strong earthquakes were selected. The anomalous disturbance of ocean level with a height of about 0.5 cm was found. Presumably, it was generated by an earthquake with magnitude M = 6.     

Numerical forecasting of the time interval between successive M8 earthquakes along the Nankai Trough,southwest Japan,using ocean bottom cable network data

One possible approach to estimating the time interval between large-scale Tōnankai (Tōkai) and Nankai earthquakes on the Japan arc is sequential assimilation of crustal deformation data. We conducted numerical modeling of sequential assimilation using surface deformation calculated from earthquake generation cycle simulations along the Nankai Trough. To account for observation noise, we used measured ocean bottom pressure gauge data, excluding tidal modulation, from a station on the ocean bottom cable network Dense Oceanfloor Network System for Earthquakes and Tsunamis in the Kumano basin. We used sequential importance sampling as our data assimilation method. We found that as the amount of data increased, the estimated time interval between the Tōnankai and Nankai earthquakes approached the “true” observed interval. In addition, the noise in the pressure gauge data was sufficiently small that simulated crustal deformation patterns could be distinguished for different time intervals.     

Beam forming on bottom-interacting tow-ship noise

Ship noise received on a horizontal array towed behind the ship is shown to be useful as a potentially diagnostic tool for estimating local acoustic bottom properties. In numerical simulations, tow-ship noise which bounces off the bottom is processed on a beamformer that shows the arrival angles; the beamformer output is readily interpreted by relating it to the Green's function of the acoustic wave equation. Simple signal processing is shown to be sufficient to extract the propagation angles of the "trapped" (i.e., propagating) modes of the acoustic waveguide. By relating the trapped modes to a basic geophysical model of the bottom, one can predict acoustic-propagation conditions for a particular bottom-interacting ocean acoustic environment.     

OBS海洋环境信号分析与应用

为研究海洋环境信号在OBS(Ocean Bottom Seismograph)原始数据中的规律及应用,根据OBS原始数据的波形及频谱特征,将研究区划分为5个时间段,依次为旧涌浪阶段、风浪渐强阶段、风浪全盛阶段、风浪消退阶段和新涌浪阶段。结合海洋天气预报,认为上述现象是由偏南风风浪对海流的影响造成的。参考野外地震数据采集记录班报,得到各阶段的时长和距离,计算风浪渐强、全盛和消退阶段OBS附近海流的平均速度。结果表明:OBS原始资料中浅海海洋环境噪音增强的主要因素是风浪,且风浪引起的噪音信号的波形变化特征是渐进式的;OBS可用于接收某种特殊阶段(如台风、海啸等)的噪音信号,并根据噪音信号的波形特征、频谱变化规律和持续时间估算该阶段的海流速度变化。     

An ocean bottom,microprocessor based seismometer

We describe the design and construction of an ocean bottom seismometer configured as a computer, based on an Intersil IM6100 microprocessor plus appropriate peripheral devices. The sensors consist of triaxial 1 Hz seismometers and a hydrophone, each sensor channel being filtered prior to digitizing so that typical noise spectra are whitened. Digital data are recorded serially on magnetic tape. The instrument is placed on the ocean bottom by allowing it to fall freely from just below the surface. An acoustic system allows precise determination of instrument position, acoustic recall, and transmission of operational information to the surface. Release from an expendable anchor is accomplished by redundant pyrotechnic bolts which can be fired by acoustic command or by precision timers.The operational flexibility provided by the micro-computer, which executes the DEC PDP8/E instruction set, enables optimum use of the 6-hr recording capacity (at 128 samples/second/channel) in the context of the particular experiment being performed.

---

     

Deep-ocean vertical noise directionality

The structure of beam noise measured at the output of a vertical array in a range dependent ocean basin was investigated using the modified wide-angle parabolic equation (PE). Noise sources were distributed throughout the basin, and the field due to each noise source at an array located in the midbasin was calculated. The response of the array to the superposition of the noise sources was found by beamforming. An efficient and direct approach that superimposes the noise sources on the PE field as the field is marched toward the array was developed. Downslope calculations of the midbasin vertical directionality were made between 50 and 400 Hz with this technique. Use of a geoacoustic model shows that the bottom behaves as a low-pass filter     

极低频海洋噪声与风的相关性研究

风通过影响海洋表面从而产生200 Hz以上的深海环境噪声,但有研究指出,通过风生表面波之间的非线性相互作用产生的驻波,能够与海床共振构成海底微震,从而产生10 Hz以下的噪声。针对这一新型风生噪声机制,本研究对威克岛海域10 Hz以下的极低频噪声进行了分析。比较了不同频率下海洋环境噪声功率谱级与风速的相关性,并讨论了风速和风向对设立在威克岛南北部二组水听器三联体信号的影响,结果表明2 Hz处的海洋环境噪声级与风速相关性最好,而风速和风向变化越剧烈海洋环境极低频噪声与风速风向的相关性越好。     

Rapid swing and spin of [deep] taut-wire-moored instruments

Rapid ‘swing’, compass variations O(10°) in O(10 s), and ‘spin’, complete rotations around the vertical axis within a few minutes, are a concern of acoustic current meters moored in-line. Observations are used from fast sampling, at once per 1 and 30 s, instrumentation on deep-ocean moorings mainly outside surface wave and bottom boundary influences. Such instruments do not require a vane common to some historic mechanical current meters and they are often moored in a much easier to handle sub-surface buoy or mounting rack, without vanes. In their mountings they are nearly symmetric, so that they can spin freely in (turbulent; shear) flows. A comparison is made between noise levels of such free spinning instrumentation with those of instruments mounted in a fixed bottom-frame and with those of instruments equipped with a vane to one side. Typical spinning has a single rotation varying between 40 and 200 s. Spinning is shown to be highly binary: on or off. Its effects are found negligible on estimates of ocean currents, provided compass updates are adequate as in existing instrumentation. Acoustic noise is O(10) times larger than noise due to spinning. Some effects of spinning are noticed in the acoustic echo amplitude showing higher noise at frequencies >100 cpd, cycles per day. The character of this noise changes dramatically due to spinning. However, it is mainly in the ocean turbulence range and does not affect measurements of internal waves or periodic zooplankton motions.     

Ocean-bottom-seismograph of the Institut für Geophysik,Hamburg

The ocean bottom seismograph (OBS) of the Institut für Geophysik, Hamburg (IfG) is designed for refraction seismic experiments and for recording microseismic noise. Hydrophone signals are recorded directly on a casette tape recorder with a band width of 3–60 Hz. Signals from three component 1 Hz seismometers are recorded on a 2nd casette tape recorder in FM for a frequency range of 0.1–1 Hz. A telemetering buoy at the surface is connected with the OBS by a polypropylene rope.     

Effects of presence of a circumpolar region on buoyancy-driven circulation

Effects of the presence of a circumpolar region on buoyancy-driven circulation are investigated by using an idealized numerical ocean model. Comparison of circulation and meridional density (heat) transport is made between a closed ocean and an ocean with a cyclic gap near its southern boundary. The presence of the circumpolar region leads to disconnection of the meridional overturning across the circumpolar region. And the circumpolar eastward flow reaches the bottom of the ocean. It is essential for this that the pycnocline is deeper than the bottom of the gap. Since the amount of the mass transported northward must return southward at the levels deeper than the bottom of the cyclic gap, the weak stratification, hence weak vertical geostrophic shear, at the deeper levels leads to inactive communication across the circumpolar region. Meridional heat transport across the circumpolar region is made mainly by horizontal diffusion for the ocean with the cyclic gap, while the contribution of the advection is dominant for the closed ocean. Sensitivity of meridional heat transport to change in horizontal diffusivity is studied. The meridional heat transport for the ocean with the cyclic gap is more sensitive than for the closed ocean. The change in heat transport occurs not only in the circumpolar region but also in the rest of the ocean. It is suggested that subgrid scale phenomena, especially mesoscale eddies, in the circumpolar region controls the whole ocean to a great extent.     

Large aperture seismic imaging at a convergent margin: Techniques and results from the Costa Rica seismogenic zone

In March and April 1995 a cooperative German, Costa Rican, and United States research team recorded onshore-offshore seismic data sets along the Pacific margin of Costa Rica using the R/V Ewing. Off the Nicoya Peninsula we used a linear array of ocean bottom seismometers and hydrophones (OBS/H) with onshore seismometers extending across much of the isthmus. In the central area we deployed an OBS/H areal array consisting of 30 instruments over a 9 km by 35-km area and had land stations on the Nicoya Peninsula adjacent to this marine array and also extending northeast on the main Costa Rican landmass. Our goal in these experiments was to determine the crustal velocity structure along different portions of this convergent margin and to use the dense instrument deployments to create migrated reflection images of the plate boundary zone and the subducting Cocos Plate. Our specific goal in the central area was to determine whether a subducted seamount is present at the location of the 1990, M 7 earthquake off the Nicoya Peninsula and can thus be linked to its nucleation. Subsequently we have processed the data to improve reflection signals, used the data to calculate crustal velocity models, and developed several wide-aperture migration techniques, based on a Kirchhoff algorithm, to produce reflection images. Along the northern transect we used the ocean bottom data to construct a detailed crustal velocity model, but reflections from the plate boundary and top and bottom of the subducting Cocos plate are difficult to identify and have so far produced poor images. In contrast, the land stations along this same transect recorded clear reflections from the top of the subducting plate or plate boundary, within the seismogenic zone, and we have constructed a clear image from this reflector beneath the Nicoya shelf. Data from the 3-D seismic experiment suffer from high-amplitude, coherent noise (arrivals other than reflections), and we have tried many techniques to enhance the signal to noise ratio of reflected arrivals. Due to the noise, an apparent lack of strong reflections from the plate boundary zone, and probable structural complexity, the resulting 3-D images only poorly resolve the top of the subducting Cocos Plate. The images are not able to provide compelling evidence of whether there is a subducting seamount at the 1990 earthquake hypocenter. Our results do show that OBS surveys are capable of creating images of the plate boundary zone and the subducting plate well into the seismogenic zone if coherent reflections are recorded at 1.8 km instrument spacing (2-D) and 5 km inline by 1 km crossline spacing for 3-D acquisition. However, due to typical high amplitude coherent noise, imaging results may be poorer than expected, especially in unfavorable geologic settings such as our 3-D survey area. More effective noise reduction in acquisition, possibly with the use of vertical hydrophone arrays, and in processing, with advanced multiple removal and possibly depth filtering, is required to achieve the desired detailed images of the seismogenic plate boundary zone.     

Transmission and reflection of the Rossby waves in a stratified ocean with bottom topography

Transmission and reflection coefficients are calculated for Rossby waves incident on a bottom topography with constant slope in a continuously stratified ocean. The characteristics of the coefficients are interpreted in terms of the quasigeostrophic waves on the slope. In the parameter range where only the barotropic Rossby waves can propagate in the region outside the slope, the bottom trapped wave plays the same role as the topographic Rossby wave in a homogeneous ocean, and hence the transmission is weak unless phase matching takes place. When both of the barotropic and baroclinic Rossby waves can propagate outside the slope, the total transmission can be strong. The bottom trapped wave affects the transmission and reflection, and it leads to the possibility that the Rossby wave is transmitted as a mode different from the incident mode. When the number of the wavy modes on the slope is smaller than that of the Rossby wave modes outside the slope, strong reflection occurs.The results for an ocean with linear distribution of the squared Brunt-Väisälä frequency are compared to those in a uniformly stratified ocean. The weakening of the stratification near the bottom is almost equivalent to reducing the effect of the slope.     

深海生态学研究进展和几点建议

深海及其底部生物圈的探测和研究,是当前海洋大科学研究的焦点,是未来的海洋科学,具有重要的战略意义。深海及其底深部生态学的研究,是其中的一项重要内容。本文简要回顾了深海生态学发展的三个里程碑以及中国在该学科的研究进展,提出了大力发展深海探测和钻探设备、技术,建设深海生态站和大洋钻探船;以生态系统为中心开展深海生态研究;将深海生态研究纳入国家和有关部门的研究计划、支持多学科交叉和融合的建议。