Two subduction events in a polycyclic basement: Alpine and pre-Alpine high-pressure metamorphism in the Suretta nappe, Swiss Eastern Alps

This study is essentially based on coupling macrostructures, microstructures and metamorphic petrology in polymetamorphic mafic rocks from the Swiss Eastern Alps (Suretta nappe, Penninic domain). Petrographic criteria are used in conjunction with structural analysis and microprobe work to define crystallization/deformation relationships and to establish a relative but precise sequence of tectono-metamorphic events. A first eclogite facies overprint and related exhumation occurred before emplacement of late Palaeozoic intrusives. During the Alpine cycle, the Suretta nappe was part of the thinned European continental margin. The Tertiary burial due to subduction and collision is responsible for D1 ductile thrusting and blueschist facies metamorphism. Late deformation phases, related to exhumation, are responsible for the development of extensional structures under greenschist facies conditions. Quantitative metamorphic petrology based on Gibbs free energy minimization (DOMINO by de Capitani) gives a constraint on the P–T  conditions during the polymetamorphic and polycyclic evolution. The first high- P metamorphic event related to pre-Alpine structures occurred at c . 700  °C and at least 2.0  GPa. These conditions are compatible with pre-Alpine high- P re-equilibration already described in several Alpine units. The Alpine high- P metamorphism occurred under blueschist facies conditions at c . 400–450  °C and 1.0  GPa. Similar high- P , low- T  conditions have already been described in the Mesozoic and Permian rock types. The two high- P events are clearly related to two different geothermal regimes and geodynamic environments.     

Multistage tectono-stratigraphic evolution of the Canavese Intracontinental Suture Zone: New constraints on the tectonics of the Inner Western Alps

The Canavese Intracontinental Suture Zone (CISZ) within the Inner Western Alps represents the remnant of a long-lived minor subduction zone involving a narrow, thinned continental crust/oceanic lithosphere seaway between two continental domains of the Adria microplate (i.e., the Sesia Zone and the Ivrea-Verbano Zone). As opposed to many suture zones, the CISZ mostly escaped pervasive tectonic deformation and metamorphism, thus preserving the original stratigraphy and allowing the relationships between tectonics and sedimentation to be defined. Through detailed geological mapping (1:5000 scale), structural analysis, stratigraphic and petrographic observations, we document evidences for the late Paleozoic to late Cenozoic tectonic evolution of the CISZ, showing that it played a significant role in the context of the tectonic evolution of the Inner Western Alps region from the early to late Permian Pangea segmentation, to the Jurassic Tethyan rifting, and up to the subduction and collisional stages, forming the Western Alps. The site of localization/formation of the CISZ was not accidental but associated with the re-use of structures inherited from regional-scale wrench tectonics related to the segmentation of Pangea, and from the subsequent extensional tectonics related to the Mesozoic rifting, as documented by crosscutting relationships between stratigraphic unconformities and tectonic features. Our findings document that evidences derived from stratigraphy, facies indicators, and relationships between tectonics and sedimentation in the shallow crustal portions of suture zones, such in the CISZ, are important to better constrain the tectonic history of those metamorphic orogenic belts around the world in which evolutionary details are commonly complicated by high-strain deformation and metamorphic transformations.     

Structural evolution of the contact between two Penninic nappes (Zermatt-Saas zone and Combin zone,Western Alps) and implications for the exhumation mechanism and palaeogeography

The boundary zone between two Penninic nappes, the eclogite-facies to ultrahigh-pressure Zermatt-Saas zone in the footwall and the blueschist-facies Combin zone in the hanging wall, has been interpreted previously as a major normal fault reflecting synorogenic crustal extension. Quartz textures of mylonites from this fault were measured using neutron diffraction. Together with structural field observations, the data allow a refined reconstruction of the kinematic evolution of the Pennine nappes. The main results are: (1) the contact is not a normal fault but a major thrust towards northwest which was only later overprinted by southeast-directed normal faulting; (2) exhumation of the footwall rocks did not occur during crustal extension but during crustal shortening; (3) the Sesia-Dent Blanche nappe system originated from a continental fragment (Cervinia) in the Alpine Tethys ocean, and the Combin zone ophiolites from the ocean basin southeast of Cervinia; (4) out-of-sequence thrusting played a major role in the tectonic evolution of the Penninic nappes. An erratum to this article can be found at     

Unravelling the evolution of an Alpine to post-glacially active fault in the Swiss Alps

The Gemmi fault is a prominent NW–SE striking lineament that crosses the Gemmi Pass in the central Swiss Alps. A multidisciplinary investigation of this structure that included geological mapping, joint profiling, cathodoluminescence and scanning electron microscopy, stable isotope measurements, luminescence- and U-TH-dating, 3D ground penetrating radar (GPR) surveying and trenching reveals a history of fault movements from the Miocene to the Holocene. The main fault zone comprises a 0.5–3 m thick calcite cataclasite formed during several cycles of veining and brittle deformation. Displaced Cretaceous rock layers show an apparent dextral slip of 10 m along the fault.A detailed study of a small sediment-filled depression that crosses the fault provides evidence for a post-glacial reactivation of the fault. A trench excavated across the fault exposed a Late-Glacial-age loess layer and late Holocene colluvial-like slope-wash deposits that showed evidence for fault displacement of a few centimeters, indicating a recent strike-slip reactivation of the fault. Focal mechanisms of recent instrumentally recorded earthquakes are consistent with our findings that show that the fault at the Gemmi Pass, together with other parallel faults in this area, may be reactivated in today's stress field. Taking together all the observations of its ancient and recent activity, the Gemmi fault can be viewed as a window through geological space and time.     

Petrography and chemistry of sandstones from the Swiss Molasse Basin: an archive of the Oligocene to Miocene evolution of the Central Alps

Abstract Oligocene to Miocene fluvial sandstones from the Swiss Molasse Basin were analysed for sandstone framework composition, heavy minerals, whole‐rock geochemistry and detrital chrome spinel chemistry. Samples were taken from the proximal part of the basin close to the Alpine main thrust and are chronostratigraphically calibrated between 31 and 13 Ma. Sandstone composition allows the identification of different source rocks, and their variation in time and space place constraints on the Oligocene to Miocene evolution of the Central Alps. In the eastern part of the basin, sandstones document a normal unroofing sequence with the downcutting from Austroalpine sedimentary cover into Austroalpine crystalline rocks and, slightly later at ≈ 21 Ma, into Penninic ophiolites. In the central part, downcutting into crystalline basement rocks occurred at ≈ 25 Ma, and the removal of the sedimentary cover was much more advanced than in the east. This may be interpreted as a first signal from the doming of the Lepontine area. At ≈ 20 Ma, extensional tectonics in the hinterland led to the first exposure of low‐grade metamorphic rocks from the footwall of the Simplon Fault in the Central Alps. Erosion of these rocks persisted up to the youngest sediments at ≈ 13 Ma. In the western part of the basin, a contribution from granitoid and (ultra)mafic rocks is documented as early as ≈ 28 Ma. The source for the (ultra)mafic detritus is Penninic ophiolites from the Piemonte zone of the western Alps, which were already exposed at the surface at that time.     

Geothermobarometry in albite-garnet orthogneisses: A case study from the Gran Paradiso nappe (Western Alps)

The aim of this paper is to estimate syntectonic P-T conditions within albite- and garnet-bearing orthogneisses. These rocks are generally characterized by the assemblage quartz + albite + biotite + phengite + CaFe-garnet + epidote + titanite. Garnet contains up to 55 mole per cent of grossular. K-feldspar is a relict magmatic phase.

P-T conditions are estimated using several independent methods. First, it is shown that exchange reactions based on the Fe---Mg partitioning between garnet and biotite or garnet and phengite cannot be used to estimate temperatures in these rocks, due to the high grossular content of garnet. Second, maximum and minimum pressures are constrained, respectively, by the occurrence of albite instead of jadeite + quartz and by the assemblage phengite + biotite + quartz. Third, phase equilibria in albite- and garnet-bearing metagranites are modelled in the system K₂O---CaO---FeO---Al₂O₃---SiO₂---H₂O. Equilibrium curves are calculated for the observed phase compositions. Uncertainties in P-T estimates mainly result from the choice of appropriate non-ideal solution models for the garnet.

An application is developed for granites from the Gran Paradiso nappe (Western Alps). These granites show an heterogeneous deformation of Alpine age expressed by mylonitic shear zones cutting across weakly deformed domains. Estimated P-T conditions for the synkinematic assemblages are 10–16 kbar at 550±50°C.     

Local tomography and focal mechanisms in the south-western Alps: Comparison of methods and tectonic implications

We investigate how focal solutions and hypocenter locations may depend on the ray tracing algorithm and the strategy of velocity inversion. Using arrival times from a temporary seismological network in the south-western Alps, a local earthquake tomography has been performed by Paul et al. [Paul, A., Cattaneo, M., Thouvenot, F., Spallarossa, D., Béthoux, N., and Fréchet, J., 2001. A three-dimensional crustal velocity model of the south-western Alps from local earthquake tomography. J. Geophys. Res. 106, 19367–19390.] with the method developed by Thurber [Thurber, C.H., 1993. Local earthquake tomography: velocity and Vp/Vs-Theory, in Seismic Tomography: Theory and practice, Iyer, H.M., and Irahara eds., Chapman and Hall, New York, 563–583.]. Another inversion of the same data set is performed here using a different tomography code relying on a shooting paraxial method and cubic interpolation of velocities. The resulting images display the same main features, although Thurber's code appears to be more robust in regions with scarce ray coverage and strong velocity contrasts. Concerning hypocenter location in Piemont units, one major result is the concentration of hypocenters at the boundary between the mantle wedge of the Ivrea body and the European crust. Forty-six focal mechanisms are shown that were computed using both the take-off angles in the minimum 1-D model and in the 3-D velocity structures resulting from the two inversions. The sets of focal solutions are very similar, proving the reliability and the coherency of the focal solutions. The widespread extension in the core of the western Alps is confirmed whereas a few compressive solutions are found east of the Piemont units. These results constrain the sharp change of stress tensor and evidence a decoupling of strain beneath the east of Dora Maira massif up to beneath the north of Argentera massif. On a geodynamical point of view seismicity and focal mechanism distribution are compatible with the present day models published for the western Alps, where the major feature is the lithospheric thickening [Schmid, S.M., and Kissling, E., 2000. The arc of the western Alps in the light of geophysical data on deep crustal structure. Tectonics, 19, 62–85.], implying widespread extension in the core of the western Alps [Sue, C., Thouvenot, F., Fréchet, J., and Tricart, P., 1999. Widespread extension in the core of the western Alps revealed by earthquake analysis. J. Geophys. Res., 104, 25611–25622.]. However the existence of compressive events dealing at depth with the boundary of Ivrea body allows to postulate that this geological structure is still tectonically active. Even if field work has not shown this so far, the Insubric line appears to extend toward the south at depth, as a blind fault, and to play a key role in the dynamics of the south-western Alps.     

Tectono-metamorphic evolution of the Neyriz metamorphic complex, Quri-Kor-e-Sefid area (Sanandaj-Sirjan Zone, SW Iran)

The Neyriz region includes outcrops of metamorphic rocks that are thrust over the Neotethyan ophiolites. These rocks are affected by a major deformational event, the result of which includes a shearing polyphase foliation present in gneissic core domes, overprinted by a crenulation cleavage. These fundamental structures developed contemporaneously with a medium-pressure metamorphism which is characterized by the syn-kinematic crystallization of kyanite and the beginning of anatexis, followed by the development of retrometamorphic mineral parageneses. The major deformation phase in the area occurred during the Early-Cimmerian orogeny in the Late Triassic. Following the orogeny, the gneiss domes started to rise into the upper levels of the crust. From the geodynamic point of view, after the Mid-Permian the studied area was situated at southern passive margin of the Iranian plate; the central Iranian microcontinent at that time was separated by the Neotethys ocean from the Gondwanian supercontinent. After the Late Triassic the region became an active margin associated with an accretionary prism. The margin was finally involved in an orogenic wedge after the closure of the Neotethyan oceanic basin in the Late Mesozoic. Closure of the basin resulted in a major thrusting of the metamorphic rocks of the southern Iranian margin over the Neotethyan ophiolites.     

Eo-Alpine HP metamorphism in the Permian intrusives from the steep belt of the central Alps (Languard-Campo nappe and Tonale Series)

Abstract

Diorites and granitoids that intruded the Upper Austroalpine units of the central Alps during the Permian display map-pable tectonic imprints and metamorphic transformations that were acquired during the Alpine tectonometamorphic cycle. Superposed heterogeneous deformations interacted with metamorphic re-equilibration stages and created a range of textural types that reflect local deformation gradients: coronitic transformations textures, normally foliated S-tectonites and mylonitic foliations. The three textural types are distinguished on maps recording foliation trajectories of successive deformation phases, which are correlated to the evolution of metamorphic assemblages. Tectonic deformation of Alpine age is represented by three generations of ductile syn-metamorphic structures. The mineral assemblages stable during the first Alpine deformation phase (D1) are Amp_II + P1_II + white mica, + Zo/Czo + Grt + Qtz ± Mg-Ch1 ± Ilm in metadiorites and P1_II + white mica_I + Zo/Czo + Grt + Amp_II + Qtz ± Ilm/Ttn in metagranitoids; the successive foliations D2a and D2b are defined by greenschist facies minerals. Thermobarometric estimates allow T = 500–600 °C and P = 1.1 ± 0.2 GPa conditions to be determined during D1 and T ≤ 350 °C and P ≤ 0.5 GPa during D2. Relict igneous minerals in metadiorites allow to determine intrusive conditions of T = 879 ± 110 °C and P = 0.4–0.7 GPa. Radiometric ages and P/T ratio of Alpine P_maxT_Pmax suggest that the inferred P-T-d-t path may represent the thermal state of the initial Alpine subduction stages. © 2000 Éditions scientifiques et médicales Elsevier SAS     

Changing debris flow activity after sudden sediment input: a case study from the Swiss Alps

On 27 December 2011, a rock avalanche in the upper Val Bondasca in the southern Swiss Alps deposited 1.5–1.7 million m³ of rock debris. The following summer, debris flow activity in Val Bondasca was unusually high with four events after a 90‐year period of debris flow inactivity. This was an exceptional situation for the valley. Analysing the 2012 events, the long‐term record of meteorological conditions such as rainfall intensity and duration, in comparison with debris flow activity, suggests that the meteorological conditions in summer 2012 would not have triggered the high intensity debris flow events without additional sediment input. Consequently, the suddenly increased debris availability can be considered a major factor in these events. Interestingly, rainfall events of similar magnitude in the subsequent years 2013–2015 did not trigger additional debris flow events, indicating that debris flow initiation thresholds are increasing again, back towards pre‐rock avalanche levels. This study aims to help in understanding the so far poorly understood temporal evolution of debris flow triggering thresholds and the effect of sudden changes in sediment availability.     

Duration of Eo-Alpine metamorphic events obtained from multicomponent diffusion modeling of garnet: a case study from the Eastern Alps

Rocks from the Micaschist–Marble Complex of the Wölz Tauern, which are part of the middle Austroalpine unit, contain large (up to 2 cm) garnet crystals that show clear evidence of multistage growth. Isotopic dating indicates that a Variscan (～270 Ma) garnet core was overgrown by new garnet formed during Eo-Alpine metamorphism at Cretaceous times. P-T paths for the Eo-Alpine metamorphism were obtained using the method of pseudosections (Powell and Holland in Metam Geol 16:309–343, 1998) and are consistent with earlier results from independent thermobarometry. Due to the large size of the garnets, growth zoning was preserved during amphibolite facies metamorphism at both Variscan and Alpine times. Full multicomponent diffusion modeling of compositional zoning at the interface of the Alpine and Pre-Alpine garnets in conjunction with the retrieved P-T paths allow average subduction/exhumation as well as heating/cooling rates to be retrieved. The modeling suggests that a minimum subduction/exhumation rate of ～4 cm/a and heating/cooling rates on the order of 100–260°C/Ma for a 60°C subduction angle are required to preserve the observed compositional zoning overall while modifying the zoning at the interface between two garnets to the extent observed. Such rapid rates of burial/exhumation are consistent with the results of direct GPS measurements of convergence rates at several orogenic belts as well as with inferred rates from modeling in the Alps and other areas. In combination, this indicates that such rapid rates are commonplace during metamorphism in collisional orogens and places important constraints on the rheological behavior of crustal blocks in such orogens.     

Active deformation in the eastern Swiss Alps: post-glacial faults, seismicity and surface uplift

Post-glacial tectonic faults in the eastern Swiss Alps occur as single lineaments, clusters of faults or extensive fault zones consisting of several individual faults aligned along the same trend. The orientation of the faults reflects the underlying lithology and the pre-existing structures (joints, pervasive foliations) within these lithologies. Most post-glacially formed faults in the area around Chur, which undergoes active surface uplift of 1.6 mm/year, trend E–W and cut across Alpine and glacial features such as active screes and moraines. Additionally, there are NNW and ENE striking faults reactivating pervasive Alpine foliations and shear zones. Based on a comparison with the nodal planes of recent earthquakes, E–W striking faults are interpreted as active faults. Because of very short rupture lengths and mismatches of fault location with earthquake distribution, magnitude and abundance, the faults are considered to be secondary faults due to earthquake shaking, cumulative deformation in post- or interseismic periods or creep, and not primary earthquake-related faults. The maximum of recent surface uplift rates coincides with the youngest cooling of the rocks according to apatite fission-track data and is therefore a long-lived feature that extends well into pre-glacial times. Isostatic rebound owing to overthickened crust or to melting of glacial overburden cannot explain the observed surface uplift pattern. Rather, the faults, earthquakes and surface uplift patterns suggest that the Alps are deforming under active compression and that the Aar massif basement uplift is still active in response to ongoing collision.     

Lateglacial and early Holocene dynamics of adjacent valley glaciers in the Western Swiss Alps

The Alps play a pivotal role for glacier and climate reconstructions within Europe. Detailed glacial chronologies provide important insights into mechanisms of glaciation and climate change. We present 26 ¹⁰Be exposure dates of glacially transported boulders situated on moraines and ice‐moulded bedrock samples at the Belalp cirque and the Great Aletsch valley, Switzerland. Weighted mean ages of ～10.9, 11.1, 11.0 and 9.6 ka for the Belalp, on up to six individual moraine ridges, constrain these moraines to the Egesen, Kartell and Schams stadials during Lateglacial to early Holocene times. The weighted mean age of ～12.5 ka for the right‐lateral moraine of the Great Aletsch correlates with the Egesen stadial related to the Younger Dryas cooling. These data indicate that during the early Holocene between ～11.7 and ～9.2 ka, glaciers in the Swiss Alps seem to have been significantly affected by cold climatic conditions initiated during the Younger Dryas and the Preboreal Oscillation. These conditions resulted in glacier margin oscillations relating to climatic fluctuations during the second phase of the Younger Dryas – and continuing into Boreal times – as supported by correlation of the innermost moraine of the Belalp Cirque to the Schams (early) Holocene stage. Copyright © 2011 John Wiley & Sons, Ltd.     

东阿尔卑斯原-古特提斯构造演化

新生代阿尔卑斯是非洲和欧洲之间的陆陆碰撞造山带。强烈的造山作用使大量前中生代基底出露地表,尽管这些基底被强烈逆冲推覆和走滑叠置,但是仍保留较丰富的前中生代基底演化信息。结合近几年对东阿尔卑斯原-古特提斯的研究,本文梳理和重建了阿尔卑斯前中生代基底的构造格局,认为前阿尔卑斯基底受原特提斯、南华力西洋、古特提斯洋构造体系影响而经历了多期造山过程。新元古代-早古生代的原阿尔卑斯作为环冈瓦纳地块群的组成部分,受原特提斯洋俯冲的制约,是新元古-早古生代环冈瓦纳活动陆缘的组成部分,其中,海尔微-彭尼内基底组成外缘增生系统,包括卡多米期地壳碎片在内的陆缘弧/岛弧以及大量增生楔组成内缘增生系统。早奥陶世瑞亚克洋打开,随后原阿尔卑斯从冈瓦纳陆缘裂离,在泥盆纪-石炭纪受南华力西洋控制,海尔微-彭尼内-中、下奥地利阿尔卑斯从冈瓦纳分离。在早石炭世(维宪期)南阿尔卑斯(或与之相当的冈瓦纳源地块)与北部阿莫里卡地块群拼贴增生于古欧洲大陆南缘,共同组成华力西造山带(广义),华力西期缝合带保留在绍山-科尔山南侧。晚石炭世-早二叠世,阿尔卑斯受古特提斯洋的俯冲影响,在华力西造山带南侧形成安第斯山型活动大陆边缘,古特提斯洋在阿尔卑斯的演化至少持续到早三叠世,消亡遗迹保留在中奥地利阿尔卑斯基底的Plankogel杂岩中。     

A Tertiary age for Alpine high-pressure metamorphism in the Gran Paradiso massif, Western Alps: a Rb–Sr microsampling study

The timing of high‐pressure (HP) metamorphism in the internal basement massifs of the Western Alps has been contentious. In the Gran Paradiso massif silvery micaschists, thought to have developed from granitic precursors, contain assemblages indicative of pressures in excess of 18 kbar at 500–550 °C. This paper presents unique geochronological data for the paragenesis of the silvery micaschist HP assemblage. Rb–Sr microsampling of an apatite–phengite pair thought to have remained closed to Rb–Sr exchange since the HP paragenesis formed has yielded an age of 43.0 ± 0.5 Ma. Greenschist retrogression occurred after 36.3 ± 0.4 Ma, probably in the interval 36–34 Ma. The localised disturbance of the Rb–Sr system in phengite, apatite and allanite during retrogression means that only in situ microsampling could obtain meaningful ages from these rocks. The new data indicating a Tertiary age for HP metamorphism in the Gran Paradiso massif agree with recent data for other internal basement massifs in the Western Alps. A model fitting the Gran Paradiso massif into the Western Alpine framework is presented.     

U-Pb and Pb-Pb zircon dating of the older orthogneiss suite in the Silvretta nappe,eastern Alps: Cadomian magmatism in the upper Austro-Alpine realm

Two orthogneiss suites dominate the Silvretta nappe. Primary crystallization of the larger suite (younger orthogneisses) is assumed to be Ordovician in age. The second, adjacent magmatic suite consists of older, alkaline to calc-alkaline, ultrabasic, basic to intermediate and granitic rocks known as older orthogneisses. U-Pb data of multigrain zircon fractions, as well as single zircon stepwise evaporation ²⁰⁷Pb/²⁰⁶Pb results suggest a latest Proterozoic to early Cambrian intrusion age for the protoliths of the older orthogneisses as both dating methods yield early Cambrian crystallization ages of 526±7 and 519±7 Ma for an alkaline granite gneiss; similar results were obtained for two neighbouring calc-alkaline orthogneisses (²⁰⁷Pb/²⁰⁶Pb ages of 533 ± 4 and 568 ± 6 Ma, respectively). The crystal habitus corresponds to P5, S19 and S9 zircons of magmatic origin. Whole-rock initial Sr isotope ratios indicate a primitive source. The igneous protoliths of these older orthogneisses represent a fragment of a Cadomian (Pan-African) crust found in places within the basement of the European Hercynides.     

Streamflow response to regional climate model output in the mountainous watershed: a case study from the Swiss Alps

Regional climate model (RCM) outputs are often used in hydrological modeling, in particular for streamflow forecasting. The heterogeneity of the meteorological variables such as precipitation, temperature, wind speed and solar radiation often limits the ability of the hydrological model performance. This paper assessed the sensitivity of RCM outputs from the PRUDENCE project and their performance in reproducing the streamflow. The soil and water assessment tool was used to simulate the streamflow of the Rhone River watershed located in the southwestern part of Switzerland, with the climate variables obtained from four RCMs. We analyzed the difference in magnitude of precipitation, maximum and minimum air temperature, and wind speed with respect to the observed values from the meteorological stations. In addition, we also focused on the impact of the grid resolution on model performance, by analyzing grids with resolutions of 50 × 50 and 25 × 25 km². The variability of the meteorological inputs from various RCMs is quite severe in the studied watershed. Among the four different RCMs, the Danish Meteorological Institute provided the best performance when simulating runoff. We found that temperature lapse rate is significantly important in the mountainous snow and glacier dominated watershed as compared to other variables like precipitation, and wind speed for hydrological performance. Therefore, emphasis should be given to minimum and maximum temperature in the bias correction studies for downscaling climatic data for impact modeling in the mountainous snow and glacier dominated complex watersheds.     

Accuracy assessment of InSAR derived input maps for landslide susceptibility analysis: a case study from the Swiss Alps

In recent years SAR interferometry has become a widely used technique for measuring altitude and displacement of the surface of the earth. Both these capabilities are highly relevant for landslide susceptibility studies. Although there are many problems that make the use of SAR interferometry less suitable for landslide inventory mapping, it’s use in landslide monitoring and in the generation of input maps for landslide susceptibility assessment looks very promising. The present work attempts to evaluate the usefulness and limitations of this technique based on a case study in the Swiss Alps. Input maps were generated from ERS repeat pass data using SAR interferometry. A land cover map has been generated by image classification of multi-temporal SAR intensity images. An InSAR DEM was generated and a number of maps were derived from it, such as slope-, aspect, altitude- and slope form classes. These maps were used to generate landslide and rockfall susceptibility maps, which give fairly well acceptable results. However, a comparison of the InSAR DEM with the conventional Swisstopo DEM, indicated significant errors in the absolute height and slope angles derived from InSAR, especially along the ridges and in the valleys. These errors are caused by low coherence mostly due to layover and shadow effects. Visual comparison of stereo images created from hillshading maps and corresponding DEMs demonstrate that a considerable amount of topographic details have been lost in the InSAR-derived DEM. It is concluded that InSAR derived input maps are not ideal for landslide susceptibility assessment, but could be used if more accurate data is lacking.