Colliding plasma experiments to study astrophysical-jet relevant physics

We present the results of experiments in which jets are created through the collision of two laser-produced plasmas. These experiments use a simple ‘v-foil’ target design: two thin foils are placed at an angle of 140° to each other, and irradiated with a high-energy laser. The plasmas from the rear face of these foils collide and drive plasma jets moving with a velocity of ～300 km?s^?1. By choosing the foil thickness and material to suit the laser conditions available, it has proven possible to create plasma jets for which the relevant scaling parameters show significant overlap with those of outflows associated with young stellar objects (YSOs). Preliminary results are also shown from experiments to study the effect of an ambient gas on jet propagation. Nominally identical experiments are conducted either in vacuum or in an ambient medium of 5 mbar of nitrogen gas. The gas is seen to increase the jet collimation, and to introduce shock structures at the head of the outflow.     

Mass loss from viscous advective disc

Rotating transonic flows are long known to admit standing or oscillating shocks. The excess thermal energy in the post-shock flow drives a part of the in falling matter as bipolar outflows. We compute mass loss from a viscous advective disc. We show that the mass outflow rate decreases with increasing viscosity of the accretion disc, since viscosity weakens the centrifugal barrier that generates the shock. We also show that the optical depth of the post-shock matter decreases due to mass loss which may soften the spectrum from such a mass losing disc.     

The gas kinematics in the Mrk 533 nucleus and circumnuclear region: a gaseous outflow

We present an analysis of 3D spectra of Mrk 533, observed with the integral-field spectrograph MultiPupil Fiber Spectrograph (MPFS) and using the Fabry-Perot Interferometer (FPI) of the Special Astrophysical Observatory of the Russian Academy of Sciences (SAO RAS) 6-m telescope. We found emissions of gas from the active type 2 Seyfert nucleus in the centre and also from the H  ii regions in a spiral structure and a circumnuclear region. The gas kinematics shows regular non-circular motions in the wide range of galactocentric distances from 500 pc up to 15 kpc. The maps of inward and outward radial motions of the ionized gas were constructed. We found that the narrow-line region (NLR) is composed of at least two (probably three) kinematically separated regions. We detect a stratification in the NLR of Mrk 533 with the outflow velocity ranging from 20–50 km s⁻¹ to 600–700 km s⁻¹, respectively, on the radial distances of ∼2.5 and ∼1.5 kpc. The maximal outflow velocity comes from the nucleus and corresponds to the position of the observed radio structure, which is assumed to be created in an approaching jet. We suggest that these ionized gas outflows are triggered by the radio jet intrusion in an ambient medium.     

Virial shocks in galactic haloes?

We investigate the conditions for the existence of an expanding virial shock in the gas falling within a spherical dark matter halo. The shock relies on pressure support by the shock-heated gas behind it. When the radiative cooling is efficient compared with the infall rate, the post-shock gas becomes unstable; it collapses inwards and cannot support the shock. We find for a monatomic gas that the shock is stable when the post-shock pressure and density obey     . When expressed in terms of the pre-shock gas properties at radius r it reads as  ρ r Λ( T )/ u ³ < 0.0126  , where ρ is the gas density, u is the infall velocity and Λ( T ) is the cooling function, with the post-shock temperature   T ∝ u ²  . This result is confirmed by hydrodynamical simulations, using an accurate spheri-symmetric Lagrangian code. When the stability analysis is applied in cosmology, we find that a virial shock does not develop in most haloes that form before   z ∼ 2  , and it never forms in haloes less massive than a few  10¹¹ M_⊙  . In such haloes, the infalling gas is not heated to the virial temperature until it hits the disc, thus avoiding the cooling-dominated quasi-static contraction phase. The direct collapse of the cold gas into the disc should have non-trivial effects on the star formation rate and on outflows. The soft X-ray produced by the shock-heated gas in the disc is expected to ionize the dense disc environment, and the subsequent recombination would result in a high flux of Lα emission. This may explain both the puzzling low flux of soft X-ray background and the Lα emitters observed at high redshift.     

Spectral signatures of dissipative standing shocks and mass outflow in presence of Comptonization around a black hole

Accretion flows having positive specific energy are known to produce outflows and winds which escape to a large distance. According to Two Component Advective Flow (TCAF) model, centrifugal pressure dominated region of the flow just outside the black hole horizon, with or without shocks, acts as the base of this outflow. Electrons from this region are depleted due to the wind and consequently, energy transfer rate due to inverse Comptonization of low energy photons are affected. Specifically, it becomes easier to cool this region and emerging spectrum is softened. Our main goal is to show spectral softening due to mass outflow in presence of Compton cooling. To achieve this, we modify Rankine-Hugoniot relationships at the shock front when post-shock region suffers mass loss due to winds and energy loss due to inverse Comptonization. We solve two-temperature equations governing an accretion flow around a black hole which include Coulomb exchange between protons and electrons and other major radiative processes such as bremsstrahlung and thermal Comptonization. We then compute emitted spectrum from this post-shock flow. We also show how location of standing shock which forms outer boundary of centrifugal barrier changes with cooling. With an increase in disc accretion rate \((\dot{m}_{d})\) , cooling is enhanced and we find that the shock moves in towards the black hole. With cooling, thermal pressure is reduced, and as a result, outflow rate is decreased. We thus directly correlate outflow rate with spectral state of the disc.     

Photoionising shocks in SNRs and AGN

A high velocity radiative shock, or one moving into high-metallicity gas, provides an efficient means to generate a strong local UV photon field. The optical emission from the shock and precursor region is dominated by the photoionised gas, rather than by the cooling region, and the total optical + UV emission scales as the mechanical energy flux through the shock. In this paper, such models are applied to oxygen-rich supernova remnants and AGN. For AGN, the degree of magnetic support in the post-shock gas is an important parameter. LINER and cooling flow spectra can be understood as resulting from high velocity shocks without precursors, while Seyfert 1.5–2 galaxy emission line ratios result from high velocity shocks with their photoionised precursor HII regions. This model explains the problem of the high electron temperatures observed in both classes of object.     

Outflow Propagation in Collapsars: Collimated Jets and Expanding Outflows

We investigate the outflow propagation in the collapsar in the context of gamma-ray bursts (GRBs) with 2D relativistic hydrodynamic simulations. We vary the specific internal energy and bulk Lorentz factor of the injected outflow from non-relativistic regime to relativistic one, fixing the power of the outflow to be 10⁵¹erg s⁻¹. We observed the collimated outflow, when the Lorentz factor of the injected outflow is roughly greater than 2. To the contrary, when the velocity of the injected outflow is slower, the expanding outflow is observed. The transition from collimated jet to expanding outflow continuously occurs by decreasing the injected velocity. Different features of the dynamics of the outflows would cause the difference between the GRBs and similar phenomena, such as, X-ray flashes.     

New ideas on jets and outflows interactions

We propose an alternative global model for the flows surrounding both low and high mass YSOs. In addition to a central accretion-ejection engine driving the jet, the molecular outflow is powered by the infalling matter and follows a circulation pattern around the central object without necessarily being entrained by the jet. The model produces a heated pressure-driven outflow with magneto-centrifugal acceleration and collimation. We will try to clarify the relation between the fast jet and its surrounding molecular outflow, which does not primarily rely on entrainment (prompt or turbulent) in the model. Hence, there is no need to transfer a large momentum from the jet to the molecular outflow through the entrainment processes. The model suggests that radiative heating and the Poynting flux may ultimately be the main energy sources driving molecular outflow in addition to the entrainment processes by the fast jet.     

Evolution and saturation of Autowaves in photodissociation regions

The propagation of plane, cylindrical, and spherical waves in a thermally unstable gas–dust medium has been simulated numerically. As applied to the photodissociation regions near O and B stars, we take into account the interaction of ultraviolet radiation with dust grains and large polycyclic aromatic hydrocarbon molecules as well as the gas cooling through the excitation of СII ions and OI atoms and the deexcitation of rotational levels of CO molecules. The instability regions have been determined. The perturbation growth times corresponding to them are ~10³?10⁵ yr. We show that wave breaking occurs irrespective of the geometry of motion, while a perturbation in the form of a single pulse gives rise to a sequence of shock waves. The post-shock gas velocity is approximately 0.1?0.5 of the sound velocity, so that the autowaves can contribute noticeably to the observed velocity dispersion of the gas near the boundaries of HII regions. Two-dimensional simulations suggest that the presence of multiple shocks in a thermally unstable medium can accelerate significantly the destruction of preexisting isolated condensations.     

The IRS 1 circumstellar disk, and the origin of the jet and CO outflow in B5

We report the discovery of the inner edge of the high velocity CO outflow associated with the bipolar jet originating from IRS 1 in Barnard 5 and the first ever resolution of its circumstellar disk in the 2.6 mm dust continuum and C18O. From high spatial resolution observations made with the Owens Valley Millimeter Array we are able to locate the origin of the outflow to within approximately 500 AU on either side of IRS 1 and apparently at the edge of, or possibly within, its circumstellar disk. The orientation of the continuum disk is perpendicular to the highly collimated jet outflow recently seen in optical emission at much farther distances. The disk has been detected in C18O giving a disk mass approximately 0.16 M (solar). Our HCO+ and HCN maps indicate significant chemical differentiation in the circumstellar region on small scales with HCO+ tracing an extended disk of material. The 12CO interferometer maps of the outflow show two conelike features originating at IRS 1, the blue one fanning open to the northeast and the red one to the southwest. The vertices of the cones are on either side of the circumstellar disk and have a projected opening angle of about 90 degrees. The intrinsic opening angle is in the range of 60 degrees-90 degrees which leads to significant interaction between outflow and infall.     

Experimental results to study astrophysical plasma jets using Intense Lasers

We present experimental results of plasma jet, interacted with an ambient medium, using intense lasers to investigate the complex features of astrophysical jets. This experiment was performed in France at the LULI facility, Ecole Polytechnique, using one long pulse laser to generate the jet and a short pulse laser to probe it by proton radiography. A foam filled cone target was used to generate high velocity plasma jet, and a gas jet nozzle produced the well known ambient medium. Using visible pyrometry and interferometry, we were able to measure the jet velocity and electronic density. We get a panel of measurements at various gas density and time delay. From these measurements, we could underline the growth of a perturbed shape of the jet interaction with the ambient medium. The reason of this last observation is still in debate and will be presented in the article.     

Spitzer imaging of the jet driving the NGC 2264 G outflow

We present new infrared imaging of the NGC 2264 G protostellar outflow region, obtained with the InfraRed Array Camera (IRAC) onboard the Spitzer Space Telescope . A jet in the red outflow lobe (eastern lobe) is clearly detected in all four IRAC bands and, for the first time, is shown to continuously extend over the entire length of the red outflow lobe traced by CO observations. The redshifted jet also extends to a deeply embedded Class 0 source, Very Large Array (VLA) 2, confirming previous suggestions that it is the driving source of the outflow ( Gómez et al. 1994 ). The images show that the easternmost part of the redshifted jet exhibits what appear to be multiple changes of direction. To understand the redshifted jet morphology, we explore several mechanisms that could generate such apparent changes of direction. From this analysis, we conclude that the redshifted jet structure and morphology visible in the IRAC images can be largely, although not entirely, explained by a slowly precessing jet (period ≈8000 yr) that lies mostly on the plane of the sky. It appears that the observed changes in the redshifted jet direction may be sufficient to account for a significant fraction of the broadening of the outflow lobe observed in the CO emission.     

A simulation of a jet with the hiccups

We present results of a numerical simulation of a stellar jet from a source with supersonic variations in the outflow velocity. The simulation is compared with both analytical predictions and observations.     

Two-flow magnetohydrodynamical jets around young stellar objects

We present the first-ever simulations of non-ideal magnetohydrodynamical (MHD) stellar winds coupled with disc-driven jets where the resistive and viscous accretion disc is self-consistently described. The transmagnetosonic, collimated MHD outflows are investigated numerically using the VAC code. Our simulations show that the inner outflow is accelerated from the central object hot corona thanks to both the thermal pressure and the Lorentz force. In our framework, the thermal acceleration is sustained by the heating produced by the dissipated magnetic energy due to the turbulence. Conversely, the outflow launched from the resistive accretion disc is mainly accelerated by the magneto-centrifugal force. We also show that when a dense inner stellar wind occurs, the resulting disc-driven jet have a different structure, namely a magnetic structure where poloidal magnetic field lines are more inclined because of the pressure caused by the stellar wind. This modification leads to both an enhanced mass ejection rate in the disc-driven jet and a larger radial extension which is in better agreement with the observations besides being more consistent.     

Investigating the Astrophysical Applicability of Radiative and Non-Radiative Blast wave Structure in Cluster Media

We describe experiments that investigate the capability of an experimental platform, based on laser-driven blast waves created in a medium of atomic clusters, to produce results that can be scaled to astrophysical situations. Quantitative electron density profiles were obtained for blast waves produced in hydrogen, argon, krypton and xenon through the interaction of a high intensity (I ≈ 10¹⁷ Wcm⁻²), sub-ps laser pulse. From this we estimate the local post-shock temperature, compressibility, shock strength and adiabatic index for each gas. Direct comparisons between blast wave structures for consistent relative gas densities were achieved through careful gas jet parameter control. From these we investigate the applicability of different radiative and Sedov-Taylor self-similar solutions, and therefore the (ρ,T) phase space that we can currently access.     

The Environment of YSO Jets

It is commonly accepted that stars form in molecular clouds by the gravitational collapse of dense gas. However, it is precisely not the infalling but the outflowing material that is primarily observed. Outflow motions prevail around both low and high mass young stellar objects. We present here results from a family of self-similar models that could possibly help to understand this paradox. The models take into account the heating of the central protostar for the deflection and acceleration of the gas. The models make room for all the ingredients observed around the central objects, i.e. molecular outflows, fast jets, accretion disks and infalling envelopes. We suggest that radiative heating and magnetic field may ultimately be the main energy sources driving outflows for both low and high mass stars. The models show that the ambient medium surrounding the jet is unhomogeneous in density, velocity, magnetic field. Consequently, we suggest that jets and outflows have a prehistory that is inprinted in their environment, and that this should have direct consequences on the setting of jet numerical simulations.     

Truncated Collimated Flows in Abell 30, Abell 78 and the Honeycomb Nebula

Localised collimated flows of ionized gas are found in two hydrogen deficient planetary nebulae, Abell 30 and Abell 78 as well as in the Honeycomb complex of interlocking shells in halo of 30 Dor in the Large Magellanic Cloud. One common feature of these flows, in seemingly disparate objects, is that they all terminate at around the same difference in radial velocity (with respect to that of the systemic radial velocity). A possible explanation involves high speed flows being decelerated by mass-loading. In Abell 30 and 78, mass is injected by clumps embedded in the fast wind. In the Honeycomb nebula, a supernova blast wave has pierced an old dense shell wall which adds mass to the post-shock flow via a boundary layer. This revised version was published online in July 2006 with corrections to the Cover Date.     

Revealing the “fingerprints” of the magnetic precursor of C-shocks

We present the first C-shock and radiative transfer model that calculates the evolution of the line profiles of neutral and ion species like SiO, H¹³CO⁺ and HN¹³C for different flow times along the propagation of the shock through the unperturbed gas. We find that the line profiles of SiO characteristic of the magnetic precursor stage have very narrow linewidths and are centered at velocities close to the ambient cloud velocity, as observed toward the young shocks in the L1448-mm outflow. Consistently with previous works, our model also reproduces the broad SiO emission detected in the high velocity gas in this outflow, for the downstream postshock gas in the shock. This implies that the different velocity components observed in L1448-mm are due to the coexistence of different shocks at different evolutionary stages.     

Collimation of astrophysical MHD outflows

We explain in simple terms why a rotating and magnetized outflow forms a core with a jet and show numerical simulations which substantiate this argument. The outflow from a solar-type inefficient magnetic rotator is found to be very weakly collimated while the outflow from a ten times faster rotating YSO is shown to produce a tightly collimated jet. This gives rise to an evolutionary scenario for stellar outflows. We also propose a two-component model consisting of a wind outflow from a central object and a faster rotating outflow launched from a surrounding accretion disk which plays the role of the flow collimator.     

Shock waves with large energy losses by direct radiation from the front

Highly nonadiabatic shock waves are formed at an early stage of a supernova explosion inside a stellar wind because of the large energy losses by direct radiation from the front. The properties of such waves are considered for velocities of (5?25)×10³km s^?1 and gas densities of 10^?17?10^?10 g cm^?3. A critical energy flux going to “infinity” that separates two modes is shown to exist. If the flux is lower than the critical one, then energy losses cause even an increase in the post-shock temperature. An excess of the flux over its critical value results in an abrupt cooling and in a strong compression of the gas. For the flux equal to the critical one, the post-shock gas velocity matches the isothermal speed of sound. Approximate formulas are given for estimating the degree of gas compression and the post-shock radiation-to-gas pressure ratio at energy losses equal to the critical ones and for the limiting compression.