A New Method for Collecting Core Samples Without a Drilling Rig

A new piston sampler allows the collection of high-quality core samples from sand, silt or clay, up to depths of 18 meters. The sampler is operated by a one- or two-person crew without a drilling rig. The sampler and ancillary equipment fit easily into a half-ton truck, making this a highly portable sampling system. Other advantages include minimal mechanical disturbance and precisely known sample depth. Casing is not required to maintain an open corehole below the water table and drilling fluid is not used in the corehole, so the solids and pore water of the sample should not be contaminated by foreign fluids. High-quality samples for physical, geochemical, and microbiological characterization of the subsurface are easily obtained with this new device.     

Cryogenic Core Collection and Preservation of Subsurface Samples for Biomolecular Analysis

A cryogenic coring system for the collection and preservation of biomolecules in unconsolidated subsurface solid samples is presented here. The sampler is based on existing direct‐push coring technology, with the addition of a cryogenic step to freeze the sample in situ. Once brought to the surface, the frozen cores can be packed in dry ice and shipped to the laboratory for further processing and analysis. The approach prevents redistribution of fluids during sample recovery and shipping, and because the cores are frozen in situ there is little loss of solid material during retrieval to ground surface. To evaluate the performance of the approach, DNA analyses of samples collected by cryogenic coring in a very large physical model are compared with results from water samples and horizontal core samples taken in close proximity. The data indicate that the vertical distribution of DNA within the cryogenic core can be measured at the centimeter scale, providing unprecedented characterization of subsurface biogeochemical interfaces.     

Biases of submerged bulk and freeze‐core samples

Freeze‐coring and bulk sampling are routine methods used to sample subsurface spawning gravel under shallow water. Both methods have limitations. Freeze‐coring is not believed to representatively sample coarse grain sizes and the sample volumes are relatively small. Conversely, when bulk sampling, even within an enclosure, some fine sediment is suspended and washed away from the sample. This paper assesses the biases in sampling performance between the two methods and determines whether the loss of fines that occurs when bulk sampling could be predicted and thus corrected for. At six riffles the spawning substrate was sampled under approximately 50 cm of water with a bulk sample and three adjacent freeze‐cores. For each riffle, data from the two samples were combined using the method of Fripp and Diplas (1993) and the resultant composite sample was compared with the original freeze‐core and bulk samples to assess the relative precision and biases of the two techniques. On average, the D₅₀ of the bulk samples was 4 mm larger and a one‐third loss of the <2 mm fraction occurred compared with the composite samples. In contrast, freeze‐core samples contain on average 32% more sediment >16 mm compared with composite samples. Based on six samples, taken from six riffles, the amount of sediment finer than 0·5 mm lost using our bulk sampling technique with an enclosure appears to be predictable and correctable. Copyright © 2005 John Wiley & Sons, Ltd.     

Suspended sediment discharge in subsurface flow from the head hollow of a small forested watershed,northern Japan

Surface flow and suspended sediment discharge from the head hollow of the Jozankei Experimental Watershed in Hokkaido, northern Japan, were measured to clarify the implications of subsurface hydrology for soil movement. Subsurface discharges during the extremely large storms of 1993 to 1994 were measured in a V-notch weir installed at a natural spring near the bottom of the head hollow, and shallow groundwater levels were observed in the wells excavated in the hollow. Sediment samples whose particle size range from 0·001 to 0·1 mm were manually and automatically collected at 15 to 60 min intervals, by use of 1 or 21 polyethylene bottles. Maximum concentration and flux of suspended sediment during the storms preceded the peak discharge of subsurface flow by several hours. Neither the changes in concentration (mg l⁻¹) nor flux (mg s⁻¹) of suspended sediment coincided with those in subsurface discharge (l s⁻¹). Furthermore, sediment concentration was poorly correlated with the rate of change in subsurface discharge (l s⁻²) during the rising limb of the hydrograph. Suspended sediment flux during the acceleratory limb, however, was closely correlated with the rate of change in subsurface discharge. The relationship between suspended sediment flux and rate of change in subsurface discharge were in inverse proportion to initial subsurface discharge before the storm runoff and they represented rare seasonal variation. Subsurface hydraulic erosion and transport of suspended sediment resulting from changes in rate of change in subsurface discharge actively occur during the acceleratory rising limb of the hydrograph. Accordingly, subsurface hydraulic erosion during the acceleratory rising limb of the hydrograph can be physically understood by analysing suspended sediment flux associated with rate of change in subsurface discharge and initial subsurface discharge. © 1997 John Wiley & Sons, Ltd.     

浅层地震资料解释陷阱(英文)

高分辨率浅层地震方法是在近地表调查中使用最为广泛的方法。然而,在许多情况下,地震资料的解释经常会出现错误。在本文中,我们介绍了三个例子,分析了造成P波,SH波,多道的面波(MASW)地震资料解释的错误原因,大都是由于在表面或地下条件约束不确当引起的。第一个例子是P波反射剖面上的一个波的特征被解释为浅层断裂带,但后来证实它是由高水平的背景噪音引起的,因为采集测线通过了一个公路交叉口。第二个例子是SH波反射地震剖面上一个波特征被解释为是逆倾向滑断层,但有针对性的钻探表明,它是一个侵入到基岩面的一个深层局部侵蚀。最后,第三个例子,MASW调查剖面上,一个陡倾特征一开始被解释为基岩谷。然而,后来的钻探表明这是一个非常软的湖泊沉积物,后者严重损坏了应用面波频段。虽然最初的解释是不正确的,但这刺激地球物理学家和地质学家之间的讨论,并强调地球物理数据采集的时候,采集之前以及采集之后需要科学家之间有意义的合作与讨论。     

A Waste Treatment/Disposal Site Evaluation Process for Areas Underlain by Carbonate Aquifers

Fractured carbonate or karst aquifers are highly susceptible to contamination. In Minnesota, the areas underlain by karst aquifers are often characterized by thin soil cover, poorly cased wells and/or collapse features. When coupled with improper land use decisions these aquifers have become extensively contaminated.
Evaluation of existing or potentially contaminated sites has required development of unique site evaluation techniques or combinations of techniques. Shallow geophysics have been used successfully to determine subsurface karst features, pinpoint locations for additional investigations and evaluate pump-test data. Soil texture, density and relative moisture content have been closely examined and criteria established to evaluate subsurface erosion susceptibility. Percent rock core recovery, mechanical response of drilling and drilling fluid loss have been used to characterize the secondary porosity and potential contamination susceptibility of the carbonate rock. Dye tracing via surface sinks and well injection have determined primary flow paths and have been useful in estimating flow times.
These techniques used solely or in conjunction have been very useful in evaluating contamination existing in the aquifers and as a predictive tool to evaluate the proposed land uses impacts.     

A Comparison of Field Techniques for Confirming Dense Nonaqueous Phase Liquids

Dense nonaqueous phase liquids (DNAPLs) are immiscible fluids with a specific gravity greater than, water. When present, DNAPLs present a serious and long-term source of continued ground water and soil contamination (Pankow and Cherry 1996). Accurate characterization and delineation of DNAPL in the subsurface is critical for evaluating restoration potential and for remedy design at a site. However, obtaining accurate and definitive direct evidence of DNAPL is difficult. A field study was recently performed comparing several approaches to DNAPL characterization at a site where anecdotal and limited direct evidence of DNAPL exists. The techniques evaluated included a three-dimensional high-resolution seismic survey, field screening of soil cores with a flame ionization detector (FID)/organic vapor analyzer (OVA), hydrophobic (Sudan IV) dye-impregnated reactive FLUTe® (Flexible Liner Underground Technologies) liner material in combination with Rotasonic drill cores, centrifuged soil with Sudan IV dye, ultraviolet light (UV) fluorescence, a Geoprobe® Membrane Interface Probe (MIP®), and phase equilibrium partitioning evaluations based on laboratory analysis of soil samples. Sonic drilling provided reliable continuous cores from which minor soil structures could be evaluated and screened with an OVA, The screening provided reliable preliminary data for identifying likely DNAPL zones and for selecting samples for further analyses. The FLUTe liner material provided the primary direct evidence of the presence of DNAPL and reliable information on the thickness and nature of its occurrence (i.e., pooled or ganglia). The MIP system provided good information regarding the subsurface lithology and rapid identification and delineation of probable DNAPL areas. The three-dimensional seismic survey was of minimal benefit to this study, and the centrifuging of samples with Sudan IV dye and the use of UV fluorescence provided no benefit. Results of phase equilibrium partitioning concentration calculations for soil samples (to infer the presence of DNAPL) were in good agreement with the site screening data. Additionally, screening data compared well with previous ground water data and supported using 1% of the pure phase solubility limit of Freon 113 (2 mg/L) as an initial means to define the DNAPL study area. Based on the results of this study, the preferred approach for identifying and delineating DNAPL in the subsurface is to initially evaluate ground water data and define an area where dissolved concentrations of the target analyte(s) approach 1% of the pure phase solubility limit. Within this study area, the MIP device is used to more specifically identify areas and lithologic zones where DNAPL may have accumulated. Core samples (either Rotasonic or Geoprobe) are then collected from zones where MIP readings are indicative of the presence of DNAPL. Soil samples from the free-product portions of the core(s) are then submitted to a laboratory for positive analyte identification. Soil analyses are then combined with site-specific geotechnical information (i.e., fraction organic carbon, soil bulk density, and porosity) and equilibrium partitioning algorithms used to estimate concentrations of organic contaminants in soil samples that would be indicative of free product. Used in combination, the soil analysis and the MIP records appear to provide accurate DNAPL identification and delineation.     

Bedform effect on the reorganization of surface and subsurface grain size distribution in gravel bedded channels

Quantification of river bedform variability and complexity is important for sediment transport modeling as well as for characterization of river morphology. Alluvial bedforms are shown to exhibit highly nonlinear dynamics across a range of scales, affect local bed roughness, and vary with local hydraulic, hydrologic, and geomorphic properties. This paper examines sediment sorting on the crest and trough of gravel bedforms and relates it to bed elevation statistics. The data analysed here are the spatial and temporal series of bed elevation, grain size distribution of surface and subsurface bed materials, and sediment transport rates from flume experiments. We describe surface topography through bedform variability in height and wavelength and multiscale analysis of bed elevations as a function of discharge. We further relate bedform migration to preferential distribution of coarse and fine sediments on the troughs and crests, respectively, measuring directly surface and subsurface grain size distributions, and indirectly the small scale roughness variations as estimated from high resolution topographic scans.     

Development of benthic macroinvertebrates sediment index(BSI) for bioassessment of freshwater sediment

Sediment quality has been evaluated in a variety of ways since the early 1990s in studies from Europe. In South Korea, most studies have used an indicator value for benthic macroinvertebrates based on water quality, not sediment quality. To date, few studies have examined the biological integrity of benthic macroinvertebrate communities in South Korea. In the current study, the tolerance valency and value in samples and the indicator weight values were measured for 43 benthic macroinvertebrate taxa from 73 sampling units in South Korea from 2014 to 2016. Total organic carbon, the amount of heavy metals, and total ammonia nitrogen were analyzed. The average grade for each pollutant was used as the sediment quality index. A benthic macroinvertebrates sediment index was developed for bioassessment of freshwater sediment. The benthic macroinvertebrates sediment index, which is based on the relative frequency of occurrence of macroinvertebrates, was highly correlated with pollution levels in the sediment. This index can be used in the field to assess the contamination of freshwater sediment. As the sample size was small in the current study and there were taxonomic limitations of Chironomidae larvae, further research is needed to improve the reliability of the benthic macroinvertebrates sediment index.     

A new sampler for extracting bed material sediment from sand and gravel beds in navigable rivers

Grain‐size distributions of bed material sediment in large alluvial rivers are required in various scientific and management applications, but characterizing gravel beds in navigable rivers is hampered by difficulties in sediment extraction. The newly developed and preliminarily tested sampler reported here can extract sediment from a range of riverbeds. The 36 × 23 × 28 cm stainless steel toothed sampler is deployed from and dragged downstream by the weight of a jet boat, and it improves upon previous samplers that are unable to penetrate gravel bed surfaces, have small apertures, and/or cannot retain fine sediment. The presented sampler was used to extract 167 bed material sediment samples of up to 16 kg (dry weight) with an average sample size of ～6 kg from 67 cross‐sections spanning 160 river kilometres along the Sacramento River. It was also tested at three sites on a subaerial bar to compare surface, subsurface, and sampler distributions. Sampler penetration is ～5 cm. The device collects individual samples that satisfy the criterion for bed material sediment whereby the largest particle comprises no more than 5% of the total sample mass in gravel and sand beds, except where the degree of surface armouring is large (e.g. armor ratios >> 2) and where more than 10% of bed material sediment is composed of grains larger than 64 mm. When aggregated samples exceed 15 kg, all satisfy the criterion whereby the largest particle comprises no more than 1% of the total sample mass. Samples closely resemble surface size distributions, except where armouring is strong. The sampler should be subject to more rigorous field testing, but many of its current limitations are expected to become negligible with the advent a larger, heavier version of the sampling device. Copyright © 2008 John Wiley & Sons, Ltd.     

Estimating sedimentation rates and sources in a partially urbanized catchment using caesium-137

While there has been increased interest in determining sedimentation rates and sources in agricultural and forested catchments in recent years, there have been few studies dealing with urbanized catchments. A study of sedimentation rates and sources within channel and floodplain deposits of a partially urbanized catchment has been undertaken using the ¹³⁷Cs technique. Results for sedimentation rates showed no particular downstream pattern. This may be partially explained by underestimation of sedimentation rates at some sites by failure to sample the full ¹³⁷Cs profile, floodplain erosion and deliberate removal of sediment. Evidence of lateral increases in net sedimentation rates with distance from the channel may be explained by increased floodplain erosion at sites closer to the channel and floodplain formation by lateral deposition. Potential sediment sources for the catchment were considered to be forest topsoil, subsurface material and sediments derived from urban areas, which were found to be predominantly subsurface material. Tracing techniques showed an increase in subsurface material for downstream sites, confirming expectations that subsurface material would increase in the downstream direction in response to the direct and indirect effects of urbanization. © 1998 John Wiley & Sons, Ltd.     

Sediment disturbance off the Tagus Estuary, Western Portugal: chronic contamination, sewage outfall operation and runoff events

Sediment disturbance patterns in the coastal area off the Tagus Estuary (Portugal) have been assessed using a set of combined techniques. The potential sources of disturbance in the area include chronic contamination of the fine sediments originating from the estuary, a local input from a long-sea sewage outfall and occasional high runoff episodes following torrential rain. The Sediment Quality Triad approach, combining environmental chemistry (namely organic contaminants), macrofaunal benthic communities and laboratory sediment toxicity assays, was performed on sediment samples from 20 sites. The samples were collected before the outfall commenced operation and four years after commissioning, in order to evaluate the relative magnitudes of the three potential sources of disturbance. The sediment contamination created by the estuary was identified as the most important cause of reduced sediment quality, as disturbance in all three components of the Sediment Quality Triad were only found in a site located near the estuary.     

Reduced Sediments: A Factor in the Design of Subsurface Oxidant Delivery Systems

A preliminary field performance evaluation of in situ bioremediation of a contaminated aquifer at the Libby, Montana, Superfund site, a former wood preserving site, was conducted for the Bioremediation Field Initiative sponsored by the U.S. Environmental Protection Agency (U.S. EPA). The current approach for site remediation involves injecting oxygen and nutrients into the aquifer to stimulate microbial degradation of target compounds that include polycyclic aromatic hydrocarbons and pentachlorophenol. The preliminary field evaluation determined that, in addition to the oxygen demand associated with the microbial oxidation of the organic contamination, uncontaminated aquifer sediments at the site are naturally reduced and also exert a significant oxygen demand. This conclusion is supported by three types of information: (1) analyses of ground water samples; (2) results from a field-scale tracer test; and (3) results of laboratory evaluations of oxygen use by reduced aquifer sediment samples. An estimate of the cost of supplying hydrogen peroxide to satisfy the oxygen demand of the uncontaminated reduced sediments is provided to demonstrate that the additional cost of oxidizing the reduced sediments could be significant. The presence of naturally occurring reduced sediments at a contamination site should be considered in the design of subsurface oxidant delivery systems.     

Field Tests of a DNAPL Characterization System Using Cone Penetrometer-Based Raman Spectroscopy

Cone penctrometer test (CPT) based Raman spectroscopy was used to identify separate phase tetrachloroethylene (PCE) and trichlorocthylene (TCE) contamination in the subsurface at two locations during field tests conducted at the U.S. Department of Energy's (DOE) Savannah River site. Clear characteristic Raman spectral peaks for PCE and TCE were observed at two sites and several depths during CPT deployment. Because of the uniqueness of a Raman spectrum for a given compound, these data are compelling evidence of the presence of the two compounds. The Raman spectral results correlated with high PCE and TCE concentrations in soil samples collected from the same subsurface zones, confirming that the method is a viable dense nonaqueous phase liquid (DNAPL) characterization technique. The Raman spectroscopic identification of PCE and TCE in these tests represents the first time that DNAPLs have been unequivocally located in the subsurface by an in situ technique.
The detection limit of the Raman spectroscopy is related to the probability of contaminant droplets appearing on the optical window in the path of the probe light. Based on data from this fieldwork the Raman technique may require a threshold quantity of DNAPL to provide an adequate optical cross section for spectroscopic response. The low aqueous solubility of PCE and TCE and relatively weak optical intensity of the Raman signal precludes the detection of aqueous phase contaminants by this method, making it selective for DNAPL contaminants only.     

Immediate industrial effects on sediment mercury concentrations in a clean coastal environment

Studies were initiated in May 1975 to determine the impact of a new nickel refinery on ambient mercury level in sediments taken from Halifax Bay, Australia. Although mercury levels were relatively low in all samples, surface sediments were found to contain 2.5–3.0 times the mercury concentration of subsurface samples. However, surface sediment samples collected adjacent to the refinery outfall within the first three weeks of continuous discharge showed significant increases in mercury levels when compared with surface samples taken from areas not affected by the refinery.     

Hydrocarbon contamination on the Antarctic peninsula: III. The Bahia Paraiso—Two years after the spill

Two years after the release of 600 000 l of diesel fuel arctic into Arthur Harbor, little spill-related contamination can be detected in intertidal limpets (Nacella concinna) and subtidal sediments. Periodic releases of small amounts of material from the ship oil nearby islands, in particular the intertidal areas of Christine, Limitrophe and Humble Islands. Subtidal sediment contamination is primarily due to other local inputs such as ship, boating and station activities. Beaches were unusually contaminated after 2 yr, but quiescent weather conditions, occasional releases from the wreck, and prevailing currents may concentrate hydrocarbon contamination in relatively low energy areas. Intertidal limpets (N. concinna) collected along these beaches were also contaminated. The volatility of the fluid, the amount spilled, and the dynamic weather and current conditions in Arthur Harbor tended to minimize long-term contamination of the area.     

Pathways of runoff and sediment transfer in small agricultural catchments

Simultaneous field monitoring of runoff and suspended sediment loads from a 30 ha, artificially‐drained, mixed‐agricultural catchment in Herefordshire, UK indicates field drains are the dominant pathway for the transfer of runoff and sediment to the stream. Surface runoff pathways draining 6·2% of the catchment area transported around 1% of the catchment sediment load, while subsurface runoff in field drains draining 26·5% of the catchment transported around 24% of the sediment load. The explanations offered here for the dominance of drainflow—the spatial limitation of surface runoff generation and low hillslope‐stream connectivity of surface runoff compared with subsurface runoff—are also likely to apply to other artificially‐drained lowland agricultural catchments in the UK. These catchments are usually on poorly‐drained soils, and land management can have a considerable effect on the operation of runoff pathways and the transfer of sediment from hillslope to stream. As a result, subsurface inputs may also dominate sediment transfers in other underdrained catchments. The focus on sediment and pollutant losses via surface runoff pathways means that pollution inputs from subsurface, preferential pathways have been unfairly neglected, and it may be more important to focus on subsurface sediment and sediment‐associated pollution inputs for mitigation rather than inputs from surface pathways. Copyright © 2009 John Wiley & Sons, Ltd.     

OSL chronology of a sedimentary sequence from the inner-shelf of the East China Sea and its implication on post-glacial deposition history

Sedimentary records from the inner-shelf of the East China Sea (ECS) are unique for the reconstruction of post-glacial palaeoclimate and sea-level changes. So far, the chronology of sediment succession from this region has mainly been based on radiocarbon dating, which might be problematic due to reworked deposition or old carbon contamination. In this study we tested the applicability of optically stimulated luminescence (OSL) dating to a drilling core (ECS-DZ1) taken from the northern ESC. A total of 20 OSL samples and two radiocarbon samples were collected from the upper 58 m of this core. The results indicate the likely sufficient reset of OSL signal of fine-grained (4–11 μm) quartz before burial, and thus reliable chronology for the studied core sediments. For one sample, however, the extracted coarse-grained (100–200 μm) quartz overestimated the deposition age significantly, presumably resulting from partial bleaching prior to deposition. The fine-grained quartz ages are generally consistent with the stratigraphical order, and the reliability of these OSL ages are further validated by two selective robust ¹⁴C dates. The chronological framework of core ECS-DZ1 reveals striking sedimentation-rate changes. By comparison with other chronostratigraphical records, we infer that post-glacial deposition history (since ∼15 ka) of the study site is likely related to regional sea-level rise and delta-estuary environment evolution, as well as strengthened human activities and/or coastal currents.     

Observations on the biota of an estuarine beach at Hardys Bay (NSW, Australia) following a spillage of aldrin

An industrial accident resulted in a spillage of aldrin onto an estuarine beach at Hardys Bay, New South Wales. Samples of water and sediment were taken 3 weeks later to measure the level of contamination resulting from the spill. The abundances of some intertidal biota were also determined at the site of the spillage and in other uncontaminated areas.

Three weeks after the spill, samples of water were not contaminated by aldrin but samples of sediment from the surface in the vicinity of the drain contained aldrin. In comparison to uncontaminated locations the abundances of crustacea were greatly reduced in the vicinity of the drain but abundances of polychaetes were not significantly different. The field data on the relative susceptibility of the two groups of animals agrees well with laboratory derived LC50 data for crustacea and polychaetes.

The study suggests that degree of contamination of water and sediment may not always be an accurate reflection of acute impact on biota, and that different components of the biota can show different reactions to the presence of a toxic chemical.     

Tracing suspended sediment and particulate phosphorus sources in catchments

Information on suspended sediment and particulate P (PP) sources is an important requirement in many catchment-based diffuse source pollution studies, in order to assist with model validation and to provide information to support the development of effective sediment and phosphorus control strategies. Such information is, however, frequently unavailable or difficult to assemble. In the study reported, source fingerprinting procedures were successfully used to assemble this information for seven sub-catchments in the Hampshire Avon catchment and five sub-catchments in the Middle Herefordshire Wye catchment. The results provide important new information on the relative importance of the contributions from surface and channel/subsurface sources to the suspended sediment and PP fluxes from the catchments. In the Wye sub-catchments channel/subsurface sources contributed 40–55% of the overall suspended sediment flux and 21–43% of the PP flux from the catchments. Equivalent values for the Avon were 1–41% and 1–54%, respectively. Combination of the information on the relative importance of surface and channel/subsurface sources with measured suspended sediment fluxes has provided the first estimates of the specific fluxes of sediment and PP attributable to channel/subsurface sources for UK catchments. The former are as high as 15–20 t km⁻² year⁻¹ in some of the Wye sub-catchments, whereas the latter exceeded 0.1 kgP ha⁻¹ year⁻¹ in the same sub-catchments. The results emphasize the need to take account of potential contributions from channel/subsurface sources when using measured suspended sediment and PP flux data to validate predictions derived from models incorporating only surface contributions.