福建沿岸天文潮-风暴潮-台风浪耦合漫堤预警系统

基于SWAN模式和MATLAB GUI软件建立了福建沿岸天文潮-风暴潮-台风浪耦合漫堤预警系统。该系统包含天文潮-风暴潮-台风浪耦合计算模式和海堤预警显示两部分:天文潮-风暴潮-海浪耦合水位计算采用自主研发的FETSWCM模式(Finite Element Tide-Storm Surge-Wave Coupled Model),台风浪计算采用SWAN模式(Simulation WAve Nearshore),耦合计算时FETSWCM为SWAN提供风场、水位场及流场,SWAN为FETSWCM提供波浪辐射应力;海堤预警显示基于MATLAB GUI软件交互界面,根据模式计算波浪爬高所及高程结果(天文潮-风暴潮耦合水位与波浪爬高的和)对福建沿岸海堤进行可视化预警报。使用该系统进行两场台风过程福建省沿岸的漫堤后报检验,结果表明:1312号台风过程7条海堤及1319号台风过程东山县8条海堤漫堤预警准确率为87%。     

渤海风暴减水特征及其对深水航路影响的数值模拟

利用环渤海9个沿岸站近10a潮位资料分析渤海海域的风暴减水特征,结果表明:渤海年均出现50cm和100cm风暴减水分别超过30d和6d,每年的9月至翌年4月份风暴减水最为频繁;建立了一套精细化天文潮-风暴潮耦合模型用于渤海深水航路的潮位预报,各站天文潮模拟验证的平均均方根误差为18.5cm,由此计算得到航路代表点的潮汐特征值并作潮汐预报;后报模拟了近10a重大风暴减水过程,模拟与实测吻合较好,说明该耦合模型可为该航路的潮位预报提供有益参考。     

深圳香港海域浪潮耦合模型的建立及其应用

以河口海岸海洋模型ECOM和第三代海浪模型SWAN为基础,以全球天文潮预报模式TPXO6.2和台风参数模型风场及气压场作为驱动,采用海洋-陆架区-海岸三重嵌套网格,建立了适用于深圳香港水域天文潮-风暴潮-台风浪耦合模型。以0814号台风"黑格比"为算例,进行了耦合模拟计算,计算结果显示,天文潮、风暴潮位和浪高与实测值符合良好,天文潮的均方根误差小于0.15 m,有效波高误差0.9 m,风暴高潮位平均误差0.23 m;并分析了风暴潮位和波浪的相互影响,以及深港水域波浪场的分布,4 m水深考虑风暴潮位影响有效波高提高0.40 m,沿岸波浪增水在0.20 m以内。     

Delft3D在天文潮与风暴潮耦合数值模拟中的应用

本文应用Delft-3D水动力学计算软件,以长江口地区为例建立的台风风暴潮、天文潮耦合数值预报模型,对台风风暴潮、天文潮两潮耦合预报模式进行探研和分析。该模式不同于以往的单纯台风增水模型与天文潮叠加的风暴潮模式,而是在计算中直接对天文潮和台风风暴潮进行两潮耦合,有效地消除了近岸地区潮波与增水之间叠加的非线性影响。通过模拟台风8114和7708过境对长江口的影响,并与实测数据比较,预报结果和实测水位过程的对比说明,台风风暴潮耦合数值预报模式对增水和高潮的过程预报是准确的,两者在高水位时同步且相差甚微。     

一个高分辨率的长江口台风风暴潮数值预报模式及其应用

利用河口海岸海洋模式(ECOM-Si)建立了一个适用于长江口区风暴潮的数值预报模式.该模式采用对岸线有较好拟合能力的自然正交水平坐标系统和能分辨较复杂海底地形的垂直σ坐标系统.模式考虑了长江口径流量对风暴潮的影响,部分地考虑了天文潮和风暴潮非线性相互作用对风暴增水的影响.风暴潮预报的大气强迫场用模型气压场和模型风场.利用所建立的模式对长江口区台风风暴潮进行了8个个例模拟,模拟增水与实测增水的峰值相比较,平均绝对误差不足10cm.利用本研究建立的模式,就气象因子对风暴潮位的敏感性进行了数值试验.试验结果表明,台风中心气压降低(升高)20hPa可导致约100cm的风暴潮位升高(或降低).台风最大风速半径误差对台风增水的变化影响也较显著.试验还表明,长江径流量增加1倍(减半),可以造成风暴潮的平均增加25cm(减小13cm).天文潮位相变化对风暴增水的影响数值试验表明,当台风暴潮与天文潮在不同位相相互作用,可使风暴潮位最大增加达70cm或减小90cm.     

1003号台风“灿都”风暴潮特征分析与模拟

根据粤西沿海4个海洋站潮位资料分析、讨论了“灿都”台风风暴潮特征:利用改进的Jelesnianski风场,并采用耦合天文潮模拟与非耦合天文潮两种方案,对1003号台风“灿都”进行模拟、分析,模拟结果显示:在改进的杰氏风场驱动下,两种预报结果误差都比较小,但耦合天文潮预报结果优于非耦合天文潮预报结果.     

福建沿海精细化台风风暴潮集合数值预报技术研究及应用

该文首先基于高级环流模型(ADCIRC)建立了一个适合台湾海峡及福建沿海区域的精细化台风风暴潮数值预报模式。利用所建立的精细化数值预报模式对影响台湾海峡及福建沿海的8次台风风暴潮个例进行了模拟,对模拟的24个站次的风暴潮增水峰值与实测值进行了对比,平均绝对误差小于15 cm;其次,为了尽可能减小由于台风路径预报误差而造成的风暴潮增减水误差,本文采用了集合数值预报技术,试报证明此方法可以在一定程度上减小风暴潮增减水误差。     

舟山海域风暴潮特征及数值模拟研究

选择20个对舟山海域有较大影响的历史台风案例,开展定海站实测潮位数据的分析与归纳,总结得出20个台风中风暴潮过程增水最大值为5612号台风的207.1 cm,风暴潮高潮位最大值为9711号台风的283.7 cm。同时,在三维斜压水动力模型SELFE的基础上加入台风气压场和风场模块,建立了一个采用非结构三角形网格的天文潮-风暴潮耦合模型,模拟表明定海站的斜压效应较为明显,非线性耦合作用相对较弱,但两潮耦合风暴潮增水结果仍优于风暴潮单因子增水结果,与实际增水更为接近。在此基础上,以一定间隔在5612号台风原路径南北两侧各设计了2条平行路径,分别模拟两潮耦合风暴潮增水,结果表明5612号台风参数沿其原路径偏南1个最大风速半径距离的S1路径运动时可模拟得到定海站可能最大风暴潮增水为243.9 cm。最后,在S1路径下模拟可能最大风暴潮增水分别遭遇天文高、中、低潮位时的风暴潮高潮位,结果表明天文潮高潮时可得到可能最大风暴潮高潮位约为400 cm,天文中潮时次之,而天文低潮时风暴潮高潮位最低。     

超强台风“桑美”及“韦帕”风暴潮预报分析

基干河口海岸水动力模型MIKE2l,以及全球潮汐预报模型,建立浙江省沿海天文潮与风暴潮耦合预报模式.针对登陆浙江省的两次超强台风"桑美"和"韦帕",以预报的天文潮潮波和台风参数为依据,进行浙江沿海风暴潮位预报,在路径基本准确的情况下,风暴高潮位预报值与实测值相差17cm,后报精度为12cm,为沿海防汛提供了可靠的依据.     

渤海局部海域风暴潮漫滩计算模式──ADI干湿网格模式在渤海局部海域风暴潮漫滩计算中的应用

采用ＡＤＩ干湿网格模式和一种大小区嵌套式的数值计算格式，考虑了天文潮与风暴潮的非线性耦合效应，对渤海局部海域的风暴潮漫滩进行了数值模拟。模拟结果与实测结果符合良好，证实ＡＤＩ干湿网格模式对海湾风暴潮漫滩计算的可行性。指出ＡＤＩ干湿网格模式对预报淹水受灾范围具有应用价值。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.     

INFORMATION FOR AUTHORS

<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,     

Evaluation of the Risk of Marine Slope Instability: A Pseudo-3D Approach for Application to Large Areas

This article presents a methodology developed to evaluate the instability of submarine slopes that extend over a large area. Special attention was paid to (1) the complex geometry (bathymetry) and the expanse of the slope, (2) the heterogeneity of the sediment, and (3) the distribution of the pore pressure. The safety factor was considered as a spatially varying quantity. The General Formulation (GLE, Fredlund and Krahn 1977), which fully satisfies equilibrium conditions, was used for evaluating the stability of the marine slope. The submarine slope failure, which occurred on 16 October 1979 during the construction of the new Nice airport, was studied in order to test the developed model. Geotechnical parameters were taken from experimental tests carried out by IFREMER on 19 cores extracted at different depths (from 27 m to 1300 m) (Cochonat, Bourillet, and Savoye, 1993; Mulder et al., 1994). Many scenarios were proposed in order to explain the cause of the Nice slope failure (Habib, 1994). In this article, two of those scenarios were tested. Simulation results are presented and discussed.