The Keisarhjelmen detachment records Silurian–Devonian extensional collapse in Northern Svalbard

At the junction of the Atlantic and Arctic margins, the crustal‐scale Keisarhjelmen detachment of north‐west Svalbard records previously unrecognised magnitudes of extension. The detachment separates a corrugated metamorphic core complex in the footwall from a mantling Devonian supradetachment basin in the hangingwall. The detachment has a top‐N displacement of more than 50 km, which is aligned with the map‐scale corrugations, and an upwards ductile to brittle transition with shear related footwall retrogression. This configuration has striking similarities to extensional collapse detachments in the paired Scandinavian–Greenland Caledonides, but orientation and position link the detachment with the Ellesmerian orogen.     

Mesozoic–Tertiary structural evolution of an extensional gneiss dome—the Kesebir–Kardamos dome, eastern Rhodope (Bulgaria–Greece)

The tectonic evolution of the Rhodope massif involves Mid-Cretaceous contractional deformation and protracted Oligocene and Miocene extension. We present structural, kinematic and strain data on the Kesebir–Kardamos dome in eastern Rhodope, which document early Tertiary extension. The dome consists of three superposed crustal units bounded by a low-angle NNE-dipping detachment on its northern flank in Bulgaria. The detachment separates footwall gneiss and migmatite in a lower unit from intermediate metamorphic and overlying upper sedimentary units in the hanging wall. The high-grade metamorphic rocks of the footwall have recorded isothermal decompression. Direct juxtaposition of the sedimentary unit onto footwall rocks is due to local extensional omission of the intermediate unit. Structural analysis and deformational/metamorphic relationships give evidence for several events. The earliest event corresponds to top-to-the SSE ductile shearing within the intermediate unit, interpreted as reflecting Mid-Late Cretaceous crustal thickening and nappe stacking. Late Cretaceous–Palaeocene/Eocene late-tectonic to post-tectonic granitoids that intruded into the intermediate unit between 70 and 53 Ma constrain at least pre-latest Late Cretaceous age for the crustal-stacking event. Subsequent extension-related deformation caused pervasive mylonitisation of the footwall, with top-to-the NNE ductile, then brittle shear. Ductile flow was dominated by non-coaxial deformation, indicated by quartz c-axis fabrics, but was nearly coaxial in the dome core. Latest events relate to brittle faulting that accommodated extension at shallow crustal levels on high-angle normal faults and additional movement along strike-slip faults. Radiometric and stratigraphic constraints bracket the ductile, then brittle, extensional events at the Kesebir–Kardamos dome between 55 and 35 Ma. Extension began in Paleocene–early Eocene time and displacement on the detachment led to unroofing of the intermediate unit, which supplied material for the syn-detachment deposits in supra-detachment basin. Subsequent cooling and exhumation of the footwall unit from beneath the detachment occurred between 42 and 37 Ma as indicated by mica cooling ages in footwall rocks, and extension proceeded at brittle levels with high-angle faulting constrained at 35 Ma by the age of hydrothermal adularia crystallized in open spaces created along the faults. This was followed by Late Eocene–Oligocene post-detachment overlap successions and volcanic activity. Crustal extension described herein is contemporaneous with the closure of the Vardar Ocean to the southwest. It has accommodated an earlier hinterland-directed unroofing of the Rhodope nappe complex, and may be pre-cursor of, and/or make a transition to the Aegean back-arc extension that further contributed to its exhumation during the Late Miocene. This study underlines the importance of crustal extension at the scale of the Rhodope massif, in particular, in the eastern Rhodope region, as it recognizes an early Tertiary extension that should be considered in future tectonic models of the Rhodope and north Aegean regions.     

Low-P metamorphism following a Barrovian-type evolution. Complex tectonic controls for a common transition, as deduced in the Mondoñedo thrust sheet (NW Iberian Massif)

The Mondoñedo thrust sheet has been studied to investigate the complex dynamic relationships that may be involved in the development of low- and medium-P metamorphic domains. This unit underwent an initial medium-P event during the initial stages of Variscan convergence, related to crustal thickening. Subsequently, the thrust sheet evolved to a low-P baric type of metamorphism, related to syn-convergence thinning and exhumation. Its footwall, cropping out in two tectonic windows, registered a different evolution, with a low-P history that evolved from low- to high-T under a high geothermal gradient. Several different P–T paths of the Mondoñedo thrust sheet and its relative autochthon are traced and interpreted according to the structural evolution of the area. Following the initial crustal thickening, two main syn-convergence extensional shear zones developed. One of them occurs in the hangingwall, whereas the other affects the footwall unit. Both extensional shear zones were contemporaneous with ductile thrusting in the inner parts of the thrust sheet, and their activity is viewed as a consequence of the need for gravitational re-equilibration within the orogenic wedge.The most commonly accepted models of tectonothermal evolution in regions of thickened continental crust assume that low-P metamorphism is essentially a late phenomenon, and is linked to late-orogenic tectonic activity. In the Mondoñedo thrust sheet, our conclusions indicate that low-P metamorphism may also develop during convergence, and that this may occur in at least two cases. One is tectonic denudation of an allochthonous unit during its emplacement, and the other, thinning and extension at the footwall unit of an advancing thrust sheet. As a consequence, the low-P evolution may show different characteristics in different units of an orogenic nappe pile.     

An evaluation of the inverted metamorphic gradient at Langtang National Park, Central Nepal Himalaya

Abstract The crystalline core of the Himalayan orogen in the Langtang area of Nepal, located between the Annapurna-Manaslu region and the Everest region, contains middle to upper amphibolite grade pelitic gneisses and schists. These rocks are intimately associated with the Main Central Thrust (MCT), one of the major compressional structures in the northern Indian plate, which forms a 3.7-km-wide zone containing rocks of both footwall and hangingwall affinity. An inverted metamorphic gradient is noticeable from upper footwall through hangingwall rocks, where metamorphic conditions increase from garnet grade near the MCT zone to sillimanite + K-feldspar grade in the upper hangingwall. Petrographic data distinguish two metamorphic episodes that have affected the area: a high-pressure, moderate-temperature episode (M1) and a moderate-pressure, high-temperature episode (M2). Comparison with appropriate reaction boundaries suggests that conditions for M1 in the hangingwall were approximately 900–1200 MPa and 425–525°C. Thermobarometric results for 24 samples from the footwall, MCT zone and hangingwall reflect P-T conditions during the M2 phase of 400–1200 MPa and 490–660° C. The decrease in estimated palaeopressures from footwall to hangingwall approximate a lithostatic gradient of 27 MPa km^-1, with slight fluctuations in the MCT zone reflecting structural discontinuities. In contrast to the palaeopressures, palaeotemperatures are indistinguishable across the entire area sampled. Although field evidence suggests the presence of the inverted palaeothermal gradient well known in the Himalaya, quantitative thermobarometry indicates that temperatures of final equilibration were all within error of each other across 17 km of section. At Langtang, change in pressure is responsible for the presence of the sequence of index minerals through the section. I interpret these data to reflect diachronous attainment of equilibrium temperature conditions in a lithostatic palaeopressure profile after ductile faulting of the sequence.     

A Late Jurassic–Early Cretaceous metamorphic core complex,Strandja Massif,NW Turkey

In the eastern part of the Strandja Massif constituting the east end of the Rhodope Massif, the amphibolite facies basement rocks intruded by Permian metagranites are juxtaposed against the greenschist facies cover metasediments of Triassic-Middle Jurassic protolith age. The distinct metamorphic break between the basement and cover rocks requires a missing metamorphic section. The boundary between the two groups of rocks is a ductile to brittle extensional shear zone with kinematic indicators exhibiting a top to the E/NE shear sense. Footwall rocks are cut by weakly metamorphosed and foliated granite bodies which are clearly distinguished from the Permian metagranites by their degree of deformation, cross-cutting relations and syn-tectonic/kinematic character. Also, hangingwall rocks were intruded by unmetamorphosed and weakly foliated leucogranites. ⁴⁰Ar/³⁹Ar data indicate that the ductile deformation from 156.5 to 143.2 Ma (Middle Oxfordian-Earliest Berriasian) developed during the syn-tectonic plutonism in the footwall. Deformation, and gradual/slower cooling-exhumation survived until to 123 Ma (Barremian). The mylonitic and brittle deformation in the detachment zone developed during Oxfordian-Earliest Berriasian time (155.7–142.6 Ma) and Early Valanginian-Aptian time (136–118.7 Ma), respectively. Our new field mapping and first ⁴⁰Ar/³⁹Ar ages demonstrate the existence of an extensional core complex of Late Jurassic-Early Cretaceous age not previously described in the Rhodope/Strandja massifs.     

The Sha’it–Nugrus shear zone separating Central and South Eastern Deserts,Egypt: A post-arc collision low-angle normal ductile shear zone

The northerly dipping Sha’it–Nugrus shear zone (SNSZ) is the boundary separating the Central Eastern Desert from the South Eastern Desert of Egypt. The hangingwall of this shear zone is composed of low-grade metavolcanics and ophiolitic nappes of the Central Eastern Desert, while the footwall consists of South Eastern Desert high-grade metapsammitic gneisses (Migif-Hafafit gneissic complex). The SNSZ is about 700 m thick and represents the shear foliated lower parts of the hangingwall and upper parts of the footwall. A significant part of the SNSZ has been truncated by a later normal fault along Wadi Sha’it, however the SNSZ is well-preserved along Wadi Nugrus. Features of the SNSZ include shear-related schistosity (termed Ss), mylonite zones, sheared syn-kinematic granitoid intrusions, diverse metasomatism and metamorphic effects (higher T overprinting of hangingwall lithologies and retrogression of footwall lithologies). Shear-sense indicators clearly show top-to-N or NW displacement sense. SNSZ structures overprint arc collision related nappe structures (～680 Ma) and are therefore post-arc collision. SNSZ syn-kinematic intrusives have been dated at ～600 Ma. The SNSZ is deformed (regionally and locally folded and thrust dissected) during later NE–SW compressive tectonism. The SNSZ had an originally approximately E–W strike, low-angle N-dip and a normal shear sense, making this an example of a low-angle normal ductile shear (LANF) or detachment fault. The steep NE dip of Ss foliations and low-pitching slip lineations along Wadi Nugrus are due to NW–SE folding of the SNSZ, and do not indicate a sinistral strike-slip shear zone. The normal shear sense activity is responsible for juxtaposing the low-grade Central Eastern Desert lithologies against South Eastern Desert gneisses. A displacement of 15–30 km is estimated on the SNSZ, which is comparable to LANF displacements in the Basin and Range province of the western USA. Frictional resistance along this shear was probably reduced by high magmatic fluid pressure and hydrothermal fluid pressure. The vastness and diversity of the hydrothermal activity along this shear zone is a characteristic of other LANFs in the Eastern Desert, e.g. at Gabal El-Sibai, and may be Gabal Meatiq. The SNSZ formed during the Neoproterozoic extensional tectonic phase of Eastern Desert that began ～600 Ma, and followed arc collision and NW-ward ejection of nappes.     

Kinematics of the Southern Rhodope Core Complex (North Greece)

The Southern Rhodope Core Complex is a wide metamorphic dome exhumed in the northern Aegean as a result of large-scale extension from mid-Eocene to mid-Miocene times. Its roughly triangular shape is bordered on the SW by the Jurassic and Cretaceous metamorphic units of the Serbo-Macedonian in the Chalkidiki peninsula and on the N by the eclogite bearing gneisses of the Sideroneron massif. The main foliation of metamorphic rocks is flat lying up to 100 km core complex width. Most rocks display a stretching lineation trending NE–SW. The Kerdylion detachment zone located at the SW controlled the exhumation of the core complex from middle Eocene to mid-Oligocene. From late Oligocene to mid-Miocene exhumation is located inside the dome and is accompanied by the emplacement of the synkinematic plutons of Vrondou and Symvolon. Since late Miocene times, extensional basin sediments are deposited on top of the exhumed metamorphic and plutonic rocks and controlled by steep normal faults and flat-ramp-type structures. Evidence from Thassos Island is used to illustrate the sequence of deformation from stacking by thrusting of the metamorphic pile to ductile extension and finally to development of extensional Plio-Pleistocene sedimentary basin. Paleomagnetic data indicate that the core complex exhumation is controlled by a 30° dextral rotation of the Chalkidiki block. Extensional displacements are restored using a pole of rotation deduced from the curvature of stretching lineation trends at core complex scale. It is argued that the Rhodope Core Complex has recorded at least 120 km of extension in the North Aegean, since the last 40 My.     

The Yagan Metamorphic Core Complex and Extensional Detachment Fault in Inner Mangolia,China1

Abstract The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in some detail as well. The basic features of the Yagan metamorphic complex (Jurassic in age) are similar to those of the metamorphic core complex (Tertiary in age) in the Cordilleran area; they are as follows: (a) mylonitic gneisses in the footwall, (b) chloritized sheared mylonitic rocks, (c) pseudotachylites and flinty cataclasites or microbreccias, (d) unmetamorphosed or epimetamorphic rocks in the hanging wall with a layer of fault gouges or incohesive fault breccia next to the detachment fault. In contrast to its Cordilleran counterpart, however, there are many extensional faults with different styles (from dactile low-angle normal faults through brittle — ductile to brittle high — angle normal faults) in the footwall.     

Late Cretaceous exhumation history of an extensional extruding wedge (Graz Paleozoic Nappe Complex, Austria)

Late Cretaceous structures within the eastern Graz Paleozoic Nappe Complex define an extruding wedge with north-eastward directed thrusting in eastern portions and strike-slip shear along the margins. Stacking structures are overprinted by south-westward directed extension with low-grade metamorphic rocks in the hangingwall and high-grade basement rocks in the footwall. Pressure–temperature and structural data are obtained from successively opening quartz veins that record various stages of progressive deformation and metamorphism. Fluid inclusion data and related structures show that during extension isothermal decompression from ca. 550°C and 8 kbar down to ca. 450°C and 2 kbar was related to exhumation of rocks from deep crustal levels. The data point to a high geothermal gradient and explain condensed paleo-isotherms due to ductile normal faulting in the eastern areas of the Graz Paleozoic Nappe Complex. The investigated Late Cretaceous structural elements suggest that the Graz Paleozoic Nappe Complex decoupled from the surrounding basement units and operated as a large-scale extension–extrusion corridor that evolved prior to Miocene extrusion tectonics in the Eastern Alps.     

Post-Collisional Ductile Extensional Tectonic Framework in the UHP and HP Metamorphic Belts in the Dabie-Sulu Region, China

The present-day observable tectonic framework of the ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic belts in the Dabie-Sulu region was dominantly formed by an extensional process, mostly between 200 and 170 Ma, following the Triassic collision between the Sino-Korean and Yangtze cratons. The framework that controls the present spatial distribution of UHP and HP metamorphic rocks in particular displays the typical features of a Cordilleran-type metamorphic core complex, in which at least four regional-scale, shallow-dipping detachment zones are recognized. Each of these detachment zones corresponds to a pressure gap of 0.5 to 2.0 GPa. The detachment zones separate the rocks exposed in the region into several petrotectonic units with different P-T conditions. The geometry and kinematics of both the detachment zones and the petrotectonic units show that the exhumation of UHP and HP metamorphic rocks in the Dabie-Sulu region was achieved, at least in part, by non-coaxial ductile flow in the mul     

Metamorphic history of a syn‐convergent orogen‐parallel detachment: The South Tibetan detachment system,Bhutan Himalaya

The South Tibetan detachment system (STDS) in the Himalayan orogen is an example of normal‐sense displacement on an orogen‐parallel shear zone during lithospheric contraction. Here, in situ monazite U(–Th)–Pb geochronology is combined with metamorphic pressure and temperature estimates to constrain pressure–temperature–time (P–T–t) paths for both the hangingwall and footwall rocks of a Miocene ductile component of the STDS (outer STDS) now exposed in the eastern Himalaya. The outer STDS is located south of a younger, ductile/brittle component of the STDS (inner STDS), and is characterized by structurally upward decreasing metamorphic grade corresponding to a transition from sillimanite‐bearing Greater Himalayan sequence rocks in the footwall with garnet that preserves diffusive chemical zoning to staurolite‐bearing Chekha Group rocks in the hangingwall, with garnet that records prograde chemical zoning. Monazite ages indicate that prograde garnet growth in the footwall occurred prior to partial melting at 22.6 ± 0.4 Ma, and that peak temperatures were reached following c. 20.5 Ma. In contrast, peak temperatures were reached in the Chekha Group hangingwall by c. 22 Ma. Normal‐sense (top‐to‐the‐north) shearing in both the hangingwall and footwall followed peak metamorphism from c. 23 Ma until at least c. 16 Ma. Retrograde P–T–t paths are compatible with modelled P–T–t paths for an outer STDS analogue that is isolated from the inner STDS by intervening extrusion of a dome of mid‐crustal material.     

The metamorphic signature of contemporaneous extension and shortening in the central Himalayan orogen: data from the Nyalam transect, southern Tibet

Abstract Geological relationships and geochronological data suggest that in Miocene time the metamorphic core of the central Himalayan orogen was a wedge-shaped body bounded below by the N-dipping Main Central thrust system and above the N-dipping South Tibetan detachment system. We infer that synchronous movement on these fault systems expelled the metamorphic core southward toward the Indian foreland, thereby moderating the extreme topographic gradient at the southern margin of the Tibetan Plateau. Reaction textures, thermobarometric data and thermodynamic modelling of pelitic schists and gneisses from the Nyalam transect in southern Tibet (28°N, 86°E) imply that gravitational collapse of the orogen produced a complex thermal structure in the metamorphic core. Amphibolite facies metamorphism and anatexis at temperatures of 950 K and depths of at least 30 km accompanied the early stages of displacement on the Main Central thrust system. Our findings suggest that the late metamorphic history of these rocks was characterized by high- T decompression associated with roughly 15 km of unroofing by movement on the South Tibetan detachment system. In the middle of the metamorphic core, roughly 7–8 km below the basal detachment of the South Tibetan system, the decompression was essentially isothermal. Near the base of the metamorphic core, roughly 4–6 km above the Main Central thrust, the decompression was accompanied by about 150 K of cooling. We attribute the disparity between the P–T paths of these two structural levels to cooling of the lower part of the metamorphic core as a consequence of continued (and probably accelerated) underthrusting of cooler rocks in the footwall of the Main Central thrust at the same time as movement on the South Tibetan detachment system.     

Late orogenic crustal extension in the northern Menderes massif (western Turkey): evidence for metamorphic core complex formation

The Simav metamorphic core complex of the northern Menderes massif, western Turkey, consists of a plutonic (Tertiary) and metamorphic (Precambrian) core (footwall) separated from an allochthonous cover sequence (hanging wall) by a low-angle, ductile-to-brittle, extensional fault zone (i.e. detachment fault). The core rocks below the detachment fault are converted into mylonites with a thickness of a few hundred metres. Two main deformation events have affected the core rocks. The first deformational event (D₁) was developed within the Precambrian metamorphic rocks. The second event (D₂), associated with the Tertiary crustal extension, includes two distinct stages. Stage one is the formation of a variably developed ductile (mylonitic) deformation (D_2d) in metamorphic and granitic core rocks under greenschist facies conditions. The majority of the mylonites in the study area have foliations that strike NNW to NNE and dip SW to SE. Stretched quartz and feldspar grains define the mineral lineation trending SW-NE direction and plunging gently to SW. The kinematic indicators indicate a top-to-NE sense of shear. Stage two formation of brittle deformation (D_2b) that affected all core and cover rocks. D_2b involves the development of cataclasites and high-angle normal faults. An overall top towards the north sense of shear for the ductile (mylonitic) fabrics in the core rocks is consistent with the N-S regional extension in western Turkey.     

Ductile crust exhumation and extensional detachments in the central Aegean (Cyclades and Evvia Islands).

Abstract

The Aegean continental domain is known to be the site of widespread “back-arc” extension since at least 13 Ma, on the basis of seismotectonic, stratigraphic and fault analysis studies. This extension is documented to overprint structures related to the Mesozoic-Cenozoic Hellenic orogeny. Features attributed to early thrusting include the overall ductile deformation within two broad belts that have suffered HP/LT metamorphism across the Aegean. This study presents a structural analysis of the central Aegean area (Cyclades and Evvia Islands), examining in particular the relationship between ductile and brittle deformation, both in the field and on a regional scale. Extension appears to be responsible for most of the ductile deformation within HP rock units that have experienced penetrative greenschist facies and higher grade metamorphic over-printing. On each studied island, progressive extensional deformation has occurred through the development of a major normal-sense detachment zone down to depths of about 18-25 km. Large displacement along the detachment zone accounts for rapid cooling and exhumation of ductile lower crust to form a local metamorphic dome or core complex. Structural and stratigraphic features support a progressive migration of normal faulting away from the dome axis, and a rotation of previously active faults toward low dips, as in kinematic models recently suggested for the development of extensional detachment systems. All the studied domes, except that seen on los Island, show a dominant top-to-the north or north-east sense of shear, while on the southern flank of many of them, an opposite sense of shear is observed, displaying the same progressive evolution from ductile to brittle rock behaviour. This opposite sense of shear is thought not to result from shearing along a major conjugate detachment zone, as in some recent models, but from the accommodation in the ductile crust of upward bending of the brittle upper crust in the footwall of the north-dipping detachment. Available radiometric and stratigraphie data indicate an early minimum age (22-19 Ma) for the onset of extension. The relationship between early metamorphic domes and shallow-dipping detachments, on one hand, and Messinian-Quaternary steep normal faults and grabens, on the other hand, is best explained with the progressive and continuous development of new normal faults away from the domes axes, rather than with a two-stage evolutionary model (core-complex stage, then Basin-and-Range stage) of the type invoked for the North American Cordillera.     

Thermochronometric constraints on the tectonic evolution of the Serifos detachment, Aegean Sea, Greece

We constrain the timing and kinematics of the Serifos detachment in the southwestern Cyclades, Greece, using low-temperature thermochronometry. Fission-track dating shows that the Serifos detachment was active between ~13 and 6 Ma and that the Serifos granodiorite in its footwall intruded at or before ~12–11 Ma into the extensional shear zone and initially cooled very rapidly at rates >180°C per million year. The mylonite zone at the top of the granodiorite and mylonitic structures in its country rocks record a consistent top-SSW shear sense in the ductile crust. In the brittle regime top-NNE shear-sense indicators occur as well. Conjugate top-SSW and top-NNE high-angle normal faults are the youngest deformational features and cut across the detachment. Age–distance relationships for the fission-track data display a relatively flat pattern. We discuss a model advocating initial top-SSW movement on the Serifos detachment before and during emplacement of the granodiorite. Updoming of the detachment during exhumation and cooling caused subsequent bivergent extension in the brittle crust.     

Probable anticlockwise P,–T evolution in extending crust: Hlinsko region, Bohemian Massif

ABSTRACT In the Hlinsko region (Variscan Bohemian Massif, Czech Republic) a major extensional shear zone separates low-grade metasedimentary series (Hlinsko schists) and high-grade rocks of the Moldanubian terrane (Svratka Crystalline Unit). During late-Variscan extension, a tonalite intruded syntectonically into the normal ductile shear zone, and caused contact metamorphism of the overlying schists. Concurrent syntectonic sedimentation of a flysch series took place at the top of the hangingwall schists. In order to decipher the detailed petrological evolution of the Hlinsko unit situated in the hangingwall of this tectonic contact, a phase diagram approach and petrogenetic grids, calculated with the thermocalc computer program, were used. The crystallization/deformation relationships and the paragenetic analysis of the Hlinsko schists define a P–T path with an initial minor increase in pressure followed by cooling. Calculated pseudosections constrain this anticlockwise P-T evolution to the upper part of the andalusite field between 0.36 and 0.40 GPa for temperatures ranging from 570 to 530°C. A low a_H2O is required to explain the presence of andalusite-biotite-bearing assemblages, and could be related to the presence of abundant graphite. In contrast, the footwall rocks of the Svratka Crystalline Unit record decompression from around 0.8 GPa at a relatively constant temperature, followed by cooling. Thus, the footwall and the hangingwall units display opposite, but convergent P–T histories. Decompression in the footwall rocks is related to a rapid exhumation. We propose that the inverse, anticlockwise P–T path recorded in the hangingwall pelites is related to the rapid, extension-controlled sedimentation of the overlying flysch series.     

Low-Pressure Metamorphism of Granulite Facies in an Early Proterozoic Orogenic Event in Central Inner Mongolia1

Abstract According to the kinds of feldspar and rock associations in the Al-rich gneisses, the low-pressure metamorphic crust of the Early Proterozoic granulite facies in central Inner Mongolia can be divided into southern and northern belts which are composed of six rock associations. They represent the relevant rock sequences of the layered metamorphic rock series formed under specific metamorphic temperature and pressure conditions as well as tectonic environments. Mineral inclusions and reaction texture have recorded that the medium-temperature high-pressure mineral assemblages are replaced by the high-temperature low-pressure mineral assemblages, thus, giving rise to: garnet+quartz? hypersthene+plagioclase; kyanite? sillimanite and garnet+ kyanite / sillimanite+quartz? cordierite. The deformation fabrics of the rocks, the change of mineral assemblages and the PTt path of metamorphism indicate that the contempranceous high-temperature normal-slip ductile shearing is the main cause of the formation of the low-pressure metamorphic crust of granulite facies. In the orogenic event, the co-action of thrusting and extension resulted in the change of a medium-temperature high-pressure metamorphic environment into the high-temperature low-pressure metamorphic conditions.     

The origin of Himalayan anatexis and inverted metamorphism: Models and constraints

The key to comprehending the tectonic evolution of the Himalaya is to understand the relationships between large-scale faulting, anatexis, and inverted metamorphism. The great number and variety of mechanisms that have been proposed to explain some or all of these features reflects the fact that fundamental constraints on such models have been slow in coming. Recent developments, most notably in geophysical imaging and geochronology, have been key to coalescing the results of varied Himalayan investigations into constraints with which to test proposed evolutionary models. These models fall into four general types: (1) the inverted metamorphic sequences within the footwall of the Himalayan thrust and adjacent hanging wall anatexis are spatially and temporally related by thrusting; (2) thrusting results from anatexis; (3) anatexis results from normal faulting; and (4) apparent inverted metamorphism in the footwall of the Himalayan thrust is produced by underplating of right-way-up metamorphic sequences. We review a number of models and find that many are inconsistent with available constraints, most notably the recognition that the exposed crustal melts and inverted metamorphic sequences not temporally related. The generalization that appears to best explain the observed distribution of crustal melts and inverted metamorphic sequences is that, due to specific petrological and tectonic controls, episodic magmatism and out-of-sequence thrusting developed during continuous convergence juxtaposing allochthonous igneous and metamorphic rocks. This coincidental juxtaposition has proven to be something of a red herring, unduly influencing attention toward finding a causal relationship between anatexis and inverted metamorphism.     

Superposition of extensional detachments during the Neogene in the internal zones of the Betic cordilleras

 In the internal zones of the Betic cordilleras, extensional structures have developed from the Upper Oligocene to the present day; they are contemporaneous with compressional structures (folds and thrusts) in the external zones. From the Upper Oligocene to the Aquitanian, extension occurred in the Maláguide/Alpujárride detachment, and related structures show varying kinematics in different sectors. Younger deformations with a top-to-the-N sense of movement have affected Nevado-Filábride (ductile shear zones), Alpujárride (ductile and brittle shear zones) and Maláguide rocks (normal faults). At least from the Late Burdigalian up to the Lower Tortonian, displacements have occurred in the Alpujárride/Nevado-Filábride detachment. Deformations have been generally non-coaxial, with a top-to-the-W sense of movement. Stretching lineation trends in the Nevado-Filábride rocks curve from E to W suggesting a progressive variation of the ductile-shear-zone kinematics related to the Alpujárride/Nevado-Filábride detachment between the Aquitanian and Lower Tortonian stages. Deformations from the Lower Tortonian to the present day are normal faults, formed in extensional settings in the upper part of the crust, and folds and strike-slip faults which indicate N–S to NNW–SSE shortening directions and E–W to ENE–WSW extension directions. Received: 26 December 1995 / Accepted: 26 January 1996     

索伦缝合带中的印支期伸展作用:中国内蒙古苏尼特左旗变质核杂岩(英文)

根据对内蒙古苏尼特左旗地区的野外研究 ,我们将以前描述的交其尔逆冲断层重新解释为一南倾的伸展拆离断层。该断层为一印支期变质核杂的主拆离断层 ,它叠加在缩短的阿尔泰和满洲里带间的晚古生代索伦缝合带上。变质核杂岩的组成要素包括 :下盘的古生代中期和二叠—三叠纪侵入体 (分别是宝底道和哈拉图岩体 ) ,交其尔拆离断层之下、叠加在下盘岩体上的糜棱岩状剪切带 ,拆离断层本身和上盘成分多变、构造复杂的古生代和元古宙岩石。从U Pb年龄为 2 5 2Ma的糜棱岩化哈拉图岩体中获得白云母 ,其40 Ar/ 3 9Ar冷却年龄为 2 2 4Ma和 2 0 8Ma ,而后伸展沉积的下、中侏罗统沉积在下盘之上 ,表明变质核杂岩形成于印支期 ,即晚三叠世至侏罗纪最早期。研究区内 ,北东东走向的交其尔拆离断层的伸展作用方向大致为 2 15°。这是索伦缝合带内首次发现的印支期伸展作用 ,结合分隔遥远的中国各地区 ,如大别—苏鲁缝合带、西藏高原羌塘变质带和东阿尔金山区近来报道的其它一些晚三叠—早侏罗世 (约 2 2 0～ 190Ma)沿韧性拆离断层的伸展作用实例 ,清楚表明东亚地区区域性印支期变形的性质有必要进行重新研究