SOME ASPECTS OF TOPOGRAPHIC MAPPING OF THE SHELF

Shortcomings in the representation of bottom relief features on topographic maps of the continental shelves are examined, with particular attention given to submarine ridges and related features, the symbolization of which on such maps has been entirely ineffective. Specific recommendations are given on the form and color of symbols which can be used in upgrading the graphic impact of maps depicting such relief forms. Translated by Edward Torrey, Alexandria, VA 22308 from: Geodeziya i kartografiya, 1989, No. 1, pp. 35–40.     

MAPPING STATISTICAL SURFACES IN SPATIAL ANALYSIS: THE EXAMPLE OF WATER RESOURCE MANAGEMENT

Methods of the compilation and manipulation of statistical surfaces are described in the production of summary maps of water availability. Isopleth maps of water supply (hydrographic potential) and water consumption are compared through the superimposition of their statistical surfaces. A derivative statistical surface is then created which, depending upon the method of transformation employed, depicts either the magnitude of “free” (unused) water resources or the relative completeness (extent) of their utilization. Translated from: Vestnik Moskovskogo Universiteta, geografiya, 1988, No. 2, pp. 64-68 by Natalia B. Barbash, Brooklyn, New York, 11209.     

CHARACTERISTICS OF A DATA PROCESSING TECHNOLOGY FOR THE REVISION OF DIGITAL MAPS

A procedure is described for the revision of digital maps in geographic information systems, the basis of which rests upon a “mutual and unambiguous correspondence” between a digital map and its structural (text or graphic) model(s). Rules of transference, editing, elimination, inclusion, and cross-referencing of names are elaborated for regulation of the processes by which non-digital (cartographic, air photo, statistical) sources of new information are used to transform digital information in the original data base. Revision of digital maps is accomplished through creation of a data base of digital corrections to an original data base and/or subsequent editing of digital map(s) from these corrections or others initiated during raster scanning. Translated from: Geodeziya i kartografiya, 1986, No. 9, pp. 38-43.     

An Automated Method of Scale Selection and Sheet Configuration for Multiple Sheet Census Maps with Insets

In order to create a useful map, the cartographer must select a scale at which the map reader can distinguish features shown on the map and read their labels. However, the choice of scale for a paper map is also constrained by the size of the map sheet and by the cost of working with a large number of sheets. When the feature density pattern allows, space can be conserved by making the map at more than one scale: a small scale suitable for most of the map, while dense features are shown on inset maps at larger scales. Creating inset maps requires the cartographer to make a series of complex, interrelated decisions regarding the most effective overall sheet configuration, which is dependent upon the scale chosen for the main map and how the inset maps are created. The Census Automated Map Production System (CAMPS) applies cartographic logic and density analysis to make these decisions in a fully automated mapping environment.     

A CRITERION FOR EVALUATING THE QUALITY OF CARTOGRAPHIC PROJECTIONS USED FOR WORLD MAPS

The author develops a criterion for assessment of the quality of projections used for world maps which incorporates measures of mean square distortions of line lengths in principal directions about a point and the relationship of angular and areal distortion (in equal measure, or depending upon the requirements of particular types of maps). Translated from: Izvestiya vysshykh uchebnykh zavedeniy, Geodeziya i aerofotos”yemka, 1987, No. 3, pp. 109-112.     

Quantifying the completeness of and correspondence between two historical maps: a case study from nineteenth-century Palestine

Reconstructing past landscapes from historical maps requires quantifying the accuracy and completeness of these sources. The accuracy and completeness of two historical maps of the same period covering the same area in Israel were examined: the 1:63,360 British Palestine Exploration Fund map (1871–1877) and the 1:100,000 French Levés en Galilée (LG) map (1870). These maps cover the mountainous area of the Galilee (northern Israel), a region with significant natural and topographical diversity, and a long history of human presence. Land-cover features from both maps, as well as the contours drawn on the LG map, were digitized. The overall correspondence between land-cover features shown on both maps was 59% and we found that the geo-referencing method employed (transformation type and source of control points) did not significantly affect these correspondence measures. Both maps show that in the 1870s, 35% of the Galilee was covered by Mediterranean maquis, with less than 8% of the area used for permanent agricultural cropland (e.g., plantations). This article presents how the reliability of the maps was assessed by using two spatial historical sources, and how land-cover classes that were mapped with lower certainty and completeness are identified. Some of the causes that led to observed differences between the maps, including mapping scale, time of year, and the interests of the surveyors, are also identified.     

THE ACCURACY OF VISUAL DETERMINATIONS OF STATISTICAL CHARACTERISTICS FROM MAPS

The authors address a range of issues connected with the visual representation and interpretation of statistical data on maps. Attention is focused on common behaviors of map users in determinations of various characteristics of map symbols. Results are reported from experiments testing the relationship between the accuracy of obtaining quantitative information on a map with the total number of symbols and number of scale levels [size classes] employed, the use (or non-use) of color in the symbolization scheme, etc. Translated by Larry Richardson, Los Angeles, CA 90039 from: Izvestiya Vsesoyuznogo Geograficheskogo Obshchestva, 1989, No. 4, pp. 345–351.     

Specialist Maps of the Channel Islands Prepared by German Military Geologists during the Second World War: German Expertise Deployed on British Terrain

Abstract

During the German occupation of the Channel Islands, military geologists produced specialist maps to support their development as part of the Atlantic Wall: the line of fortifications marking the western boundary of German-occupied Europe. For Jersey, maps showed features of groundwater and quarry sites for building materials, primarily at a scale of 1 : 25 000. For Guernsey, maps at this scale were prepared to depict bedrock and superficial geology, and also maps which showed sites for building materials, water supply and features of military geology. For Alderney, maps at 1 : 10 000 showed bedrock geology, water supply, building materials plus tunnelling conditions, and military geology. Only a few contemporary copies of these maps were produced, hand-drawn upon printed topographical base-maps. Some are now preserved in Germany at the Bundesarchiv-Militärarchiv, others in the USA at the National Archives and Records Administration. They include the only military geology maps, the earliest large-scale groundwater maps and arguably the earliest large-scale building resources maps, for any part of the British Isles.     

Absolute gravity measurements on the canadian gravity standardization network

Summary Absolute measurements of gravity have been made at 6 locations ranging from Ottawa, Ont., in southern Canada, to Alert, N.W.T., the world's most northerly permanent settlement, as part of a program to provide scale and level for the Canadian Gravity Standardization Network (CGSN). Except at Resolute, N.W.T., CGSN-74 gravity values, upon which our gravity reductions are currently based, agree with the absolute gravity meter results to within about .25µm/s². The scale of our CGSN-80 gravity network, upon which our spring-balance type gravity meter scale constants are derived, agrees with the scale defined by the absolute gravity measurements to within about one part in ten thousand.     

USE OF TRANSFORMED CARTOGRAPHIC IMAGES IN URBAN CONSTRUCTION STUDIES

The authors describe how maps compiled according to non-spatial “metrics” or systems of scaling can be used in the support of urban planning and construction efforts. In particular, maps scaled according to travel time instead of ordinary distance reveal inadequacies not only in urban mass transit, but permit assessment of the rationality of urban land use as a whole, by demonstrating the degree of effort that urban residents must expend to perform such basic activities as shopping, the journey to work, and access to essential services. A methodology for the compilation of such maps is described. Translated from: Izvestiya AN SSSR, seriya geograficheskaya, 1987, No. 1, pp. 100-105.     

NEW METHODS OF COMPILING GENERAL REFERENCE MAPS IN ATLAS CARTOGRAPHY

Measures to improve the effectiveness and informational content of general reference maps and other materials in atlases designed for the general public are outlined. Emphasis is placed upon (a) enhancing the readability and visual appeal of color “landscape” maps, providing a generalized, small-scale aerial view of the region(s) of interest–this through the application of principles of perception and colorimetry–and (b) developing larger-scale “reference” maps maximizing levels of graphic detail without jeopardizing ease of perception–this based on a careful study of general reference maps in atlases worldwide and broadly based testing of users with various levels of map reading skills. Translated from: Izvestiya vysshykh uchebnykh zavedeniy: Geodeziya i aerofotos'yemka, 1985, No. 6, pp. 111-115.     

THE NOMENCLATURE OF MAP PROJECTIONS

Abstract

Map Projections.—A matter that should have been mentioned in the original article under this title (E.S.R., vii, 51, 190) is the definition of a map projection. In the list of carefully worded “Definitions of Terms used in Surveying and Mapping” prepared by the American Society of Photogrammetry (Photogrammetrie Engineering, vol. 8,1942, pp. 247–283), a map projection is defined as “a systematic drawing of lines on a plane surface to represent the parallels of latitude and the meridians of longitude of the earth or a section of the earth”, and most other published works in which a definition appears employ a somewhat similar wording. This, however, is an unnecessary limitation of the term. Many projections are (and all projections can be) plotted from rectangular grid co-ordinates, and meridians and parallels need not be drawn at all; but a map is still on a projection even when a graticule is not shown. Objection could be raised also to the limitation to “plane surface”, since we may speak of the projection of the spheroid upon a sphere, or of the sphere upon a hemisphere. Hence, it is suggested that “any systematic method of representing the whole or a part of the curved surface of the Earth upon another (usually plane) surface” is an adequate definition of a map projection.     

USE OF SPACE PHOTOGRAPHS IN THE MAKING AND REVISION OF SMALL-SCALE MAPS

A brief review paper focuses on Soviet strategies for the use of space imagery, particularly photographic products (1:2,000,000 to 1:4,200,000 scale) from manned spaceflights, in the revision of small-scale general reference maps. Principles for the interpretation and mapping of basic map elements appearing on space photographs are outlined. Space photographs provide for reduction in time spent in map editing and the more correct analysis of the reliability of information and its generalization. A technology of map revision based on the joint use of original photographs and photomaps, with the transfer of revisions from photomaps to map originals, is proposed. Translated from: Geodeziya i kartografiya, 1986, No. 8, pp. 29-33.     

MAPPING OF PLAINS RELIEF ALTERED BY MINING ACTIVITY

Basic principles of mapping for areas of mineral development for reclamation purposes are outlined. In particular special thematic maps should portray both the evolution of man-made landforms subjected to exogenous and endogenous geomorphologic processes and changes in particular elements (components) of those forms resulting from such evolution. More specifically, such indices as elevation, slope, lithology, age, major geomorphological processes, reclamation measures planned or underway, physical-chemical properties, and adjacent land uses are to be incorporated in the legends of maps documenting the existence of mining-altered areas, the severity of the impact, and the prospects for restoration. Translated from: Vestnik Moskovskogo Universiteta, geografiya, 1987, No. 5, pp. 40-46.     

A CONCEPT FOR THE MAPPING OF MULTI-STATE SOCIAL AND ECONOMIC SYSTEMS

The paper investigates the use of maps in obtaining, based on the cartometric and geographic analysis of form, information about the content of multi-state social and economic systems. Examples of specially compiled maps of multi-state systems are described and various considerations in map design and compilation are discussed: scale selection, identification of typologies and design of map legends, principles for the location of geographic features on the map, and stages in cartographic research and mapping of multi-state systems. Translated by H. L. Haslett, Leamington Spa, UK from: Izvestiya Akademii Nauk SSSR, seriya geograficheskaya, 1990, No. 3, pp. 98–103.     

AN EXPERIMENT IN SYSTEMATIZING THE CARTOGRAPHIC IMAGES OF GEOMORPHOLOGICAL FEATURES

The authors attempt to identify and standardize the cartographic symbols (“images”) used to represent a variety of specific geomorphological features. A large number of cartographic representations of landform features found on geological-geomorphological maps are classified in terms of their basic pattern/configuration and the level of complexity within each major pattern type. It is argued that the pattern or configuration of a cartographic symbol used to represent a geomorphological feature should represent the spatial structure of that feature with sufficient reliability to serve as a key to an understanding of its genesis. Translated from: Geomorfologiya, 1987, No. 2, pp. 62-66.     

A History and Analysis of Mapping Urban Expansion in the Kathmandu Valley,Nepal

Abstract

There have been numerous efforts over many years to map or delineate urban locations and features in the Kathmandu Valley of Nepal. This study acquired 27 land useland cover maps for the Valley or the urban portions of the Valley. Those maps vary greatly in their mapping parameters. The objectives of this study were to first conduct a cartographic comparison of the differences in the creation and content of the maps and then do an analysis of the urban changes in the Valley based upon the maps. The maps for the Valley have differed in their source materials, the amount of field work involved, scale and minimum mapping units, classifications used, definitions of classes and coordinate systems. Source materials have included various scales and formats of aerial photography and different satellite systems. The most difficult issue in comparing the maps is the varied classification systems and definitions. The same feature will be classified differently from map to map. This is particularly an issue for institutional features such as temples, palaces, educational facilities, open public space and governmental sites. Definitions of residential areas are also not consistent. Even with the differences in mapping parameters, considerable useful information can be obtained by comparing these maps. These include a simply documentation of the urban extent and the generally resulting loss in agricultural lands. There was an increase in urban extent from 22 to 83km² between 1955 and 2000. Urban expansion has also changed from occurring on the upland river terraces or tars to the floodplains. Finally, while not directly documented in these maps, the tremendous pace of urban growth has resulted in multiple infrastructure and environmental challenges.     

SATELLITE IMAGE ANALYSIS OF CIRCULAR ANOMALIES AND FRACTURING NETWORKS IN THE ARMORICAN MASSIF,FRANCE

This paper describes results from a detailed study of circular anomalies—related to outcrops of granitic domes over the western part of the Armorican Massif—using SPOT, Landsat TM, Seasat, and composite imagery in conjunction with aerial photographs. Two types of features have been distinguished: (1) simple and circular, related to small granitic bodies or to hidden domes, which correspond with concentric networks of fractures formed during the cooling of the granite, and (2) complex and composite of the onion skin type, related to the larger plutonic domes. This type of feature could also be related to the concentric cooling networks but would more probably correspond to the magmatic foliation planes. Semi-circular features of the “half-moon” type, derived from these described structures, are located on the periphery of plutonic domes. These could correspond to preliminary intrusions cross cut by the major structures. From the lineament maps and based on the relationship between regional foliation fracturing networks and circular features, the following networks can be distinguished: (1) radial networks centered on plutonic diapirs, which seem to be contemporary with the granitic intrusions; (2) transverse networks that pass around or across circular features, creating fan-shaped forms and which are late with respect to the granitic intrusions; (3) post-tectonic fracturing networks that cross all previously described structures; and (4) a network, parallel to the regional foliation N070, which crosses or twists the circular features. This system documents the syntectonic pattern of the granites. Translated by Judit Ozoray, Chicoutimi, Quebec from: “Structures circulaires et réseaux de fractures en pays granitique. Analyse de données SPOT, Landsat TM et Seasat sur le Massif armoricain,” Bull. Soc. géol. France, 1993, Vol. 164, No. 2, pp. 199-214, with permission of the Société Gèologique de France (please cite original paper).     

The Principles of Selection

Abstract

The fundamental of cartographic generalisation, the reduction of the amount of information which can be shown on a map in relation to reduction in scale, is examined. The Principle of Selection was first proposed by Töpfer in 1961, and is expressed as an equation relating the number of occurrences of a particular feature at source map scale and at derived map scale. The application of this to small-scale maps involves the introduction of two constants to represent symbolic exaggeration and symbolic form. Examples are given and illustrated. The paper is accompanied by explanatory notes by Dr D. H. Maling, who presented the paper on behalf of the authors at the XX International Geographical Congress London 1964, Section IX, Cartography.