The Mount Wright Arc: A Cambrian subduction system developed on the continental margin of East Gondwana,Koonenberry Belt,eastern Australia

The Mount Wright Arc, in the Koonenberry Belt in eastern Australia, is associated with two early to middle Cambrian lithostratigraphic groups developed onto the Late Neoproterozoic volcanic passive margin of East Gondwana. The Gnalta Group includes a calc-alkaline basalt-andesite-dacite suite (Mount Wright Volcanics), interpreted to represent the volcanic component of the arc. Volcaniclastic Gnalta Group rocks now buried in the Bancannia Trough represent the continental back-arc, developed immediately behind the arc in a manner analogous to the modern Taupo Volcanic Zone of New Zealand. East of the Gnalta Group is the Ponto Group, a deep marine sedimentary package that includes tholeiitic lavas (Bittles Tank Volcanics) and felsic tuffs, interpreted as part of a fore-arc sequence. The configuration of these units suggests the Mount Wright Arc developed on continental crust in response to west-dipping subduction along the East Gondwana margin, in contrast with some models for Cambrian convergence on other sections of the Delamerian Orogen, which invoke east-dipping subduction and arc accretion by arc-continent collision.This convergent margin was deformed by the middle Cambrian Delamerian Orogeny, which involved initial co-axial shortening followed by sinistral transpression, and oroclinal folding around the edge of the Curnamona Province.     

东天山大南湖岛弧带石炭纪岩石地层与构造演化

详细的地质解剖工作表明,东天山地区大南湖岛弧带石炭纪出露4套岩石地层组合,即早石炭世小热泉子组火山岩、晚石炭世底坎儿组碎屑岩和碳酸盐岩、晚石炭世企鹅山组火山岩、晚石炭世脐山组碎屑岩夹碳酸盐岩。根据其岩石组合、岩石地球化学、生物化石、同位素资料以及彼此的产出关系,认为这4套岩石地层组合的沉积环境分别为岛弧、残余海盆、岛弧和弧后盆地。结合区域资料重塑了大南湖岛弧带晚古生代的构造格架及演化模式。早、晚石炭世的4套岩石地层组合并置体现了东天山的复杂增生过程。     

Pb-Nd Isotopes Indicate the Origin of Island Arc Terranes in the Early Paleozoic Pacific

The Takaka Terrane in New Zealand is one of the best exposed arc fragments of the early Paleozoic Australian-Antarctic convergent margin and constitutes one of the most outboard terranes of this margin in paleogeographic reconstructions. Pb-Nd isotope compositions of clinopyroxenes from the Cambrian Devil River Volcanics of the Takaka Terrane enable identification of the location of the terrane in the Paleo-Pacific Ocean. The Devil River Volcanics, a suite of primitive arc and back-arc rocks, are interbedded with the partly continent-derived Haupiri Group sediments. Extremely radiogenic Pb and unradiogenic Nd compositions in the arc rocks cannot be explained by assimilation of the Haupiri Group sediments or a continental basement of such a composition. Pb isotope compositions of the Takaka Terrane sediments are much less radiogenic and overlap with crustal compositions of the Lachlan Fold Belt in Australia, suggesting that both units are derived from one source, the Australian-Antarctic Pacific margin. Pb-Nd isotope compositions in the Devil River Volcanics reflect contamination of their mantle sources by subducted sediments derived from Archean provinces in either Antarctica or Laurentia. Both provinces show characteristically high 207Pb/204Pb500 and were located at the Pacific rim in the Cambrian. Mixing between mantle and Proterozoic continental material from present western South America or eastern Laurentia cannot explain the high 207Pb/204Pb500 in the New Zealand rocks. As in New Zealand, extreme spreads in Pb-Nd isotope compositions in other Cambrian volcano-sedimentary sequences in southeast Australia and Tasmania can be explained by the same model, suggesting that all these fragments originated along the Australian-Antarctic Gondwana margin. Pb isotope compositions of arc rocks, therefore, provide a new tool for terrane analysis in the early Paleozoic Pacific ocean.     

Arc–continent collision and orogenesis in western Tasmanides: Insights from reactivated basement structures and formation of an ocean–continent transform boundary off western Tasmania

Crustal architecture in formerly contiguous basement terranes in SE Australia, Tasmania and northern Victoria Land is a legacy of late Neoproterozoic–Cambrian subduction-related processes, culminating in formation of the Delamerian–Ross orogen. Structures of Delamerian–Ross age were subsequently reactivated during late Mesozoic–Cenozoic Gondwana breakup, strongly influencing the geometry of continental rifting and providing clues about the origins and configuration of the pre-existing basement structures. An ocean–continent transform boundary developed off western Tasmania follows the trace of an older Paleozoic strike-slip structure (Avoca–Sorell fault system) optimally oriented for reactivation during the final separation of Australia from Antarctica. This boundary cuts across rocks preserving an earlier record of arc–continent collision during the course of which continental crust was subducted to mantle depths and Cambrian mafic–ultramafic island arc rocks were thrust westwards over late Neoproterozoic–Cambrian passive margin sequences. Collision was accompanied by development of a foreland basin into which 520–600 Ma arc-derived detrital zircons were shed. Following a reversal in subduction polarity, and change to transcurrent motion along the Gondwana margin, Tasmania migrated northward along the proto-Avoca fault system before entering a subduction zone located along the Heathcote–Governor fault system, precipitating a second collision, south-vergent thrusting, and tectonic reworking of the already accreted Cambrian arc–forearc assemblages and underlying passive margin sequences.     

Ediacaran–Cambrian basin evolution in the Koonenberry Belt (eastern Australia): Implications for the geodynamics of the Delamerian Orogen

Contention surrounds the Ediacaran–Cambrian geodynamic evolution of the palaeo-Pacific margin of Gondwana as it underwent a transition from passive to active margin tectonics. In Australia, disagreement stems from conflicting geodynamic models for the Delamerian Orogen, which differ in the polarity of subduction and the state of the subduction hinge (i.e., stationary or retreating). This study tests competing models of the Delamerian Orogen through reconstructing Ediacaran–Cambrian basin evolution in the Koonenberry Belt, Australia. This was done through characterising the mineral and U–Pb detrital zircon age provenance of sediments deposited during postulated passive and active margin stages. Based on these data, we present a new basin evolution model for the Koonenberry Belt, which also impacts palaeogeographic models of Australia and East Gondwana. Our basin evolution and palaeogeographic model is composed of four main stages, namely: (i) Ediacaran passive margin stage with sediments derived from the Musgrave Province; (ii) Middle Cambrian (517–500 Ma) convergent margin stage with sediments derived from collisional orogens in central Gondwana (i.e., the Maud Belt of East Antarctica) and deposited in a backarc setting; (iii) crustal shortening during the c. 500 Ma Delamerian Orogeny, and; (iv) Middle to Late Cambrian–Ordovician stage with sediments sourced from the local basement and 520–490 Ma igneous rocks and deposited into post-orogenic pull-apart basins. Based on this new basin evolution model we propose a new geodynamic model for the Cambrian evolution of the Koonenberry Belt where: (i) the initiation of a west-dipping subduction zone at c. 517 Ma was associated with incipient calc-alkaline magmatism (Mount Wright Volcanics) and deposition of the Teltawongee and Ponto groups; (ii) immediate east-directed retreat of the subduction zone positioned the Koonenberry Belt in a backarc basin setting (517 to 500 Ma), which became a depocentre for continued deposition of the Teltawongee and Ponto groups; (iii) inversion of the backarc basin during the c. 500 Delamerian Orogeny was driven by increased upper and low plate coupling caused by the arrival of a lower plate asperity to the subduction hinge, and; (iv) subduction of the asperity resulted in renewed rollback and upper plate extension, leading to the development of small, post-orogenic pull-apart basins that received locally derived detritus.     

From Cadomian arc to Ordovician passive margin: geochemical records preserved in metasedimentary successions of the Orlica-Śnieżnik Dome in SW Poland

The chemical composition of metamorphosed siliciclastic rocks in the Orlica-?nie?nik Dome (Bohemian Massif) identifies the main sources for the Neoproterozoic [the M?ynowiec Formation (MF)], Early Cambrian [the Stronie Formation (SF)] and Late Cambrian/Early Ordovician [the Goszów quartzites (GQ)] sediments. The MF developed from erosion of a Cadomian magmatic arc along the northern Gondwana margin. The variegated SF, with supra-subduction affinities, shows chemical characteristics pointing to erosion of the freshly exhumed Cadomian orogen and detritus deposition in the back-arc basin. The very different chemical features of the GQ indicate deposition in a basin sited on a passive continental margin. The explanation proposed for the observed changes in chemical composition involves three main stages: (1) The pre ~540 Ma evolution of an active continental margin and related back-arc basin ceased with the collision and accretion of the magmatic arc to the Gondwana margin; (2) Early Cambrian rift to drift transition (540–500 Ma) and development of a depositional basin filled with detritus derived from remnants of the magmatic arc; (3) Peri-Gondwana break-up leading to the formation of shallow-water passive margin depositional basins filled with quartz-rich detritus resembling Early Ordovician Armorican quartzites known from other parts of the Variscan Belt.     

内蒙古海勒斯台俯冲增生混杂岩地质特征及发现的意义

采用"造山带混杂岩区"新理论,首次在贺根山-黑河缝合带中段发现海勒斯台俯冲增生混杂岩,建立由"基质"+"岩块"组成的俯冲增生杂岩体系,其构造样式为整体左行逆冲剪切.基质主要有糜棱岩、千糜岩、超糜棱岩及少量的沉凝灰岩、粉砂岩、细砂岩,构造环境为弧前盆地,时代主要为中寒武世;岩块有洋岛海山岩块、弧后洋盆洋壳残片、火山弧岩块、裂离陆块,岩块的年龄区间主要在中寒武世-中奥陶世,裂离陆块时代为新太古代.结合俯冲增生杂岩基质年龄、岩块的年龄、侵入混杂岩的TTG年龄（449 Ma）和变形程度、接触关系等,将海勒斯台俯冲增生杂岩的形成时代厘定为中晚奥陶世.认为研究区俯冲作用在早寒武世就已经开始,在大陆边缘形成火山岛弧;奥陶纪初期弧后发育弧后盆地,至中奥陶世弧后盆地出现洋壳;此时中寒武世的基质经俯冲下切后在中奥陶世时期折返上升;晚奥陶世时期由于区域的持续汇聚挤压,该弧后洋盆很快夭折;弧陆开始碰撞,导致双向俯冲.在弧陆碰撞过程中,晚期形成的弧后盆地洋壳等新岩块混入早期形成的基质中.海勒斯台俯冲增生混杂岩带的发现填补了贺根山-黑河缝合岩带中段的空白,对区域构造格架厘定具有非常重要的意义,为研究古亚洲构造域演化提供了新的证据.      

Antarctica — Before and after Gondwana

The origin of the Antarctic continent can be traced to a relatively small late Archaean cratonic nucleus centred on the Terre Adélie regions of East Antarctica and the Gawler Craton region of South Australia. From the late Archaean to the present, the evolution of the proto-Antarctic continent was remarkably dynamic with quasi-continuous growth driven by accretionary or collisional events, episodically punctuated by periods of crustal extension and rifting. The evolution of the continent can be broken into seven main steps: (1) late Palaeoproterozoic to middle Mesoproterozoic accretion and collision added crust first to the Antarctic nucleus's eastern margin, then to its western margin. These events resulted in the incorporation of the Antarctic nucleus within a single large continent that included all of Proterozoic Australia, a more cryptic Curnamona–Beardsmore Craton and most probably Laurentia. (2) Rifting in the middle to late Mesoproterozoic separated a block of continental crust of unknown dimensions to form an ocean-facing margin, the western edge of which was defined by the ancestral Darling Fault in Western Australia and its unnamed continuation in Antarctica. (3) Inversion of this margin followed shortly and led to the Grenville aged collision and juxtaposition of proto-Antarctica with the Crohn Craton, a continental block of inferred Archaean and Palaeoproterozoic age that now underlies much of central East Antarctica. The Pinjarra Orogen, exposed along the coast of Western Australia, defines the orogenic belt marking this collision. In Antarctica the continuation of this belt has been imaged in sub-ice geophysical datasets and can be inferred from sparse outcrop data and via the widespread dispersal of syn-tectonic zircons. (4) Tectonic quiescence from the latest Mesoproterozoic to the Cryogenian was the forerunner to Ediacaran rifting that separated Laurentia and the majority of the Curnamona–Beardsmore craton from the amalgam of East Antarctica and Australia. The result was the formation of the ancestral Pacific Ocean. (5) The rifting of Laurentia was mirrored by convergence along the opposing margin of the continent. Convergence ultimately sutured material with Indian and African affinities during a series of Ediacaran and Cambrian events related to the formation of Gondwana. These events added much of the crust that today defines the East Antarctic coastline between longitudes 30°W and 100°E. (6) The amalgamation of Gondwana marked a shift in the locus of subduction from between the pre-Gondwana cratons to Gondwana's previously passive Pacific margin. The result was the establishment of the accretionary Terra Australis and Gondwanide orogenies. These were to last from the late Cambrian to the Cretaceous, and together accreted vast sequences of Gondwana derived sediment as well as fragments of older and allochthonous or para-allochthonous continental crust to Gondwana's Pacific margin. (7) The final phases of accretion overlapped with the initiation of extension and somewhat later rifting within Gondwana. Extension started in the late Carboniferous, although continental separation did not begin until the middle Jurassic. Gondwana then fragmented sequentially with Africa–South America, India, Australia and the finally the blocks of New Zealand separating between the middle Jurassic and the late Cretaceous. The late Cretaceous separation of Antarctica and Australia split the original Antarctic nucleus, terminating more than 2.4 billion years of shared evolution. The slightly younger separation of New Zealand formed the modern Antarctic continent.     

Development of New Zealand according to the fore-arc model of crustal evolution

Analysis of New Zealand geology using a fore-arc model (Crook, 1980a) leads to the recognition of four arc terrains. The west facing Tuhua volcanic arc was active from the Late Proterozoic until the Middle or Late Cambrian. Post-subduction sediments, neritic in the east and flysch in the west, accumulated on the Tuhua accretionary prism from the Late Cambrian until the Early Devonian. Thermal equilibration, metamorphism, granitoid plutonism and penetrative deformation occurred in the Middle to Late Devonian. A small area of Permian platform cover has escaped later erosion. The east-facing Rangitata Terrain records subduction from Early Permian to late Early Cretaceous. Much of its accretionary prism consists of a submarine fan complex derived from Western Antarctica and carried sideways into the trench. The accretionary prism is thick and completely kratonized in southern New Zealand, but the thickness is more variable northwards. There the overlying Upper Cretaceous to Upper Oligocene post-subduction sequence comprises shelf sediments (implying an intermediate-thickness prism) or flysch followed by shelf sediments (implying a thin prism). During the accumulation of this sequence the Rangitata Terrain was a passive continental margin. The south-facing Jurassic-late Oligocene Northland Terrain collided with this passive margin in northern New Zealand at the end of the Oligocene, forming the Northland Allochthon. Subduction then flipped and the oldest part of the Kaikoura Terrain volcanic arc formed on the outer part of the Northland Terrain. Originally this terrain faced northeast and consumed the southwestern part of the South Fiji Basin crust, but during the Miocene the arc migrated clockwise to assume its present northeastern orientation. The fore-arc model employed here satisfactorily explains most first-order and many second-order features of New Zealand geology without requiring modification, thus attesting to the model's versatility and robustness. New Zealand provides a basis for elaborating some aspects of the model, particularly the transition from the syn- to post-subduction phases of fore-arc evolution. Combination of this study with a similar study of the southeastern Australian Paleozoic yields insights into the Phanerozoic evolution of the Australian: Pacific Plates' active margin.     

2D thermomechanical modelling of continent–arc–continent collision

Arc–continent collision is a key process of continental growth through accretion of newly grown magmatic arc crust to older continental margin. We present 2D petrological–thermo-mechanical models of arc–continent collision and investigate geodynamic regimes of this process. The model includes spontaneous slab bending, dehydration of subducted crust, aqueous fluid transport, partial melting of the crustal and mantle rocks and magmatic crustal growth stemming from melt extraction processes. Results point to two end-member types of subsequent arc–continent collisional orogens: (I) orogens with remnants of accretion prism, detached fragments of the overriding plate and magmatic rocks formed from molten subducted sediments; and (II) orogens mainly consisting of the closed back-arc basin suture, detached fragments of the overriding plate with leftovers of the accretion prism and quasi insignificant amount of sediment-derived magmatic rocks. Transitional orogens between these two endmembers include both the suture of the collapsed back-arc basin and variable amounts of magmatic production. The orogenic variability mainly reflects the age of the subducting oceanic plate. Older, therefore colder and denser oceanic plates trigger subduction retreat, which in turn triggers necking of the overriding plate and opening of a backarc basin in which new oceanic lithosphere is formed from voluminous decompression melting of the rising hot asthenosphere. In this case, subducted sediments are not heated enough to melt and generate magmatic plumes. On the other hand, young and less dense slabs do not retreat, which hampers opening of a backarc basin in the overriding plate while subducted sediments may reach their melting temperature and develop trans-lithospheric plumes. We have also investigated the influences of convergence rate and volcanic/plutonic rocks' ratio in newly forming lithosphere. The predicted gross-scale orogenic structures find similarities with some natural orogens, in particular with deeply eroded orogens such as the Variscides in the Bohemian Massif.     

Isotopic constraints on crustal architecture and Permo‐Triassic tectonics in New Guinea: Possible links with eastern Australia

New U–Pb zircon ages and Sr–Nd isotopic data for Triassic igneous and metamorphic rocks from northern New Guinea help constrain models of the evolution of Australia's northern and eastern margin. These data provide further evidence for an Early to Late Triassic volcanic arc in northern New Guinea, interpreted to have been part of a continuous magmatic belt along the Gondwana margin, through South America, Antarctica, New Zealand, the New England Fold Belt, New Guinea and into southeast Asia. The Early to Late Triassic volcanic arc in northern New Guinea intrudes high‐grade metamorphic rocks probably resulting from Late Permian to Early Triassic (ca 260–240 Ma) orogenesis, as recorded in the New England Fold Belt. Late Triassic magmatism in New Guinea (ca 220 Ma) is related to coeval extension and rifting as a precursor to Jurassic breakup of the Gondwana margin. In general, mantle‐like Sr–Nd isotopic compositions of mafic Palaeozoic to Tertiary granitoids appear to rule out the presence of a North Australian‐type Proterozoic basement under the New Guinea Mobile Belt. Parts of northern New Guinea may have a continental or transitional basement whereas adjacent areas are underlain by oceanic crust. It is proposed that the post‐breakup margin comprised promontories of extended Proterozoic‐Palaeozoic continental crust separated by embayments of oceanic crust, analogous to Australia's North West Shelf. Inferred movement to the south of an accretionary prism through the Triassic is consistent with subduction to the south‐southwest beneath northeast Australia generating arc‐related magmatism in New Guinea and the New England Fold Belt.     

内蒙古中西部多岛海构造演化

内蒙古中西部大陆由一个微大陆、三条弧后盆地和三条火山岛弧,即华北微大陆、白云鄂 傅弧后盆地、白乃庙火山岛弧、温都尔庙弧后盆地、苏尼特左－锡林浩特火山岛弧、贺根山弧后盆 地和二连浩特－锡林郭勒火山岛弧组成。经过了长期而复杂的微大陆和火山弧的裂解、弧后盆地 的消减衰亡及弧－陆和弧－弧碰拉等构造演化,才最终形成今天所见到的这种构造样式。     

Recognition of the Cambrian Timan–Severnaya Zemlya orogen and timing of geological evolution of the North Kara sedimentary basin based on detrital zircon dating

New data on the ages of detrital zircons from folded basement rocks and cover sediments of the Severnaya Zemlya archipelago and Izvestiy TSIK islands have been obtained. The basement age is defined as Cambrian (pre-Ordovician). The Ordovician and Silurian sandstones were mainly formed by erosion of the basement rocks. The Devonian sandstones were formed by debris sourced from the Caledonian orogen. The Carboniferous–Early Permian molasse was formed simultaneously with the erosion of the Carboniferous granitoids and weathering of the Ordovician volcanic arc rocks and the Cambrian basement. The North Kara basin was formed in the Ordovician as a back-arc basin. It experienced its main compression deformations at the boundary of the Devonian and Carboniferous and in the Carboniferous.     

The Ross orogeny of the transantarctic mountains: a northern Victoria Land perspective

Northern Victoria Land (Antarctica) is made up of three terranes of Cambrian–Ordovician rocks: the Wilson (WT), Bowers (BT) and Robertson Bay terranes (RBT). The WT comprises a low- to high-grade metasedimentary sequence intruded by calc-alkaline plutons with magmatic arc affinity; the BT is composed of low-grade metavolcanic and metasedimentary rocks usually interpreted as an intra-oceanic arc; the RBT is a very low-grade flysch-like sequence. Terrane juxtaposition has traditionally been attributed to accretion during the Cambro-ordovician Ross orogeny. We propose a new model in which the WT, BT and RBT are interpreted as an arc/back-arc/trench system, developed in the context of a SW-dipping subduction zone. The subducting plate carried a continent originally located outboard of the turbidite fan of the RBT. Collision between this continent and the East Antarctic craton caused partial subduction of the intervening back-arc basin and, ultimately, the end of Ross-orogenic subduction. The turbidite fan of the RBT originally sedimented above the trench and on the subducting oceanic plate; due to collision it was thrusted on the continent, that constitutes, at least in part, the present basement of the RBT turbidite. The eastern portions of this continental mass were later dissected by the tensile tectonics related to the opening of the of the Southern Ocean.     

Gondwana dispersion and Asian accretion: Tectonic and palaeogeographic evolution of eastern Tethys

Present-day Asia comprises a heterogeneous collage of continental blocks, derived from the Indian–west Australian margin of eastern Gondwana, and subduction related volcanic arcs assembled by the closure of multiple Tethyan and back-arc ocean basins now represented by suture zones containing ophiolites, accretionary complexes and remnants of ocean island arcs. The Phanerozoic evolution of the region is the result of more than 400 million years of continental dispersion from Gondwana and plate tectonic convergence, collision and accretion. This involved successive dispersion of continental blocks, the northwards translation of these, and their amalgamation and accretion to form present-day Asia. Separation and northwards migration of the various continental terranes/blocks from Gondwana occurred in three phases linked with the successive opening and closure of three intervening Tethyan oceans, the Palaeo-Tethys (Devonian–Triassic), Meso-Tethys (late Early Permian–Late Cretaceous) and Ceno-Tethys (Late Triassic–Late Cretaceous). The first group of continental blocks dispersed from Gondwana in the Devonian, opening the Palaeo-Tethys behind them, and included the North China, Tarim, South China and Indochina blocks (including West Sumatra and West Burma). Remnants of the main Palaeo-Tethys ocean are now preserved within the Longmu Co-Shuanghu, Changning–Menglian, Chiang Mai/Inthanon and Bentong–Raub Suture Zones. During northwards subduction of the Palaeo-Tethys, the Sukhothai Arc was constructed on the margin of South China–Indochina and separated from those terranes by a short-lived back-arc basin now represented by the Jinghong, Nan–Uttaradit and Sra Kaeo Sutures. Concurrently, a second continental sliver or collage of blocks (Cimmerian continent) rifted and separated from northern Gondwana and the Meso-Tethys opened in the late Early Permian between these separating blocks and Gondwana. The eastern Cimmerian continent, including the South Qiangtang block and Sibumasu Terrane (including the Baoshan and Tengchong blocks of Yunnan) collided with the Sukhothai Arc and South China/Indochina in the Triassic, closing the Palaeo-Tethys. A third collage of continental blocks, including the Lhasa block, South West Borneo and East Java–West Sulawesi (now identified as the missing “Banda” and “Argoland” blocks) separated from NW Australia in the Late Triassic–Late Jurassic by opening of the Ceno-Tethys and accreted to SE Sundaland by subduction of the Meso-Tethys in the Cretaceous.     

Geological Evolution of Northeastern Anatolia

The paleogeography of the Eastern Pontides was defined by the Paleotethys ocean to the north and a continental assemblage to the south, prior to Carboniferous time. The S-dipping subduction of Paleotethys beneath Gondwana caused the development of arc magmatism, mostly active in the Early Carboniferous. Cessation of magmatism during Late Carboniferous-Early Permian time was accompanied by the deposition of platform carbonates, which were rifted to open a back-arc oceanic basin (Karakaya ocean) during the Triassic.

Accompanying closure of this Triassic basin, the Ladinian-Late Triassic products of Neotethys, opening in the south, transgressively overlay the basement in the Keban continent to the south. However, transgression reached the northern region (Pontide continent) during Liassic time, because of a topographic high created by southward subduction of the Paleotethys ocean as well as closure of the Karakaya ocean.

During the late Cenomanian/Turonian to Eocene, an island arc evolved as a result of N-dipping subduction of Neotethys. The ophiolite-melange association was obducted onto the Pontide continent as a retrocharriage process in the Turonian-Maastrichtian, Paleocene, and the end of the early Eocene, and onto the Keban continent in Campanian-Maastrichtian and pre-late Lutetian time.

A continental-lacustrine environment developed, and partial melting of the thickened crust initiated the development of volcanic units in the Miocene. The region was affected by right-lateral strike-slip faulting (the North Anatolian fault) and a NE-SW-trending left-lateral strike-slip fault system (the Northeast Anatolian fault).     

东昆仑西段晚古生代盆地系

东昆仑西段晚古生代从北向南分别为昆北弧后盆地、昆中岛弧及昆南弧前增生楔.在二叠纪,增生楔又转变成岛弧及弧后盆地.昆北弧后盆地石炭纪发育有陆缘到深海盆地的沉积,二叠纪由碎屑岩过渡为浅海碳酸盐岩.昆中岛弧带沉积盖层为一些碳酸盐岩孤立台地和小的山间盆地,并有火山熔岩、火山碎屑岩的堆积.昆南弧前盆地岩石类型非常复杂,石炭纪包括了陆源碎屑岩、火山熔岩、火岩碎屑岩、钙屑浊积岩、硅质岩等.二叠纪的弧间盆地从深海盆地演化为浅海碳酸盐岩沉积.前锋弧也逐渐露出水面,形成孤立灰岩台地.东昆仑西段晚古生代沉积整体特征具有沉积相分布不对称性及"盆岭"相问展布、沉积类型多样性、物源、古流向的双(多)向性、沉积序列的两层性、沉积物的成熟度低、近源等.盆地演化可划分为盆地扩张阶段、弧陆碰撞阶段两个阶段.总体表现为弧后盆地性质的沉积与演化特点.     

New data on the Neoproterozoic – Cambrian geotectonic setting of the Teplá-Barrandian volcano-sedimentary successions: geochemistry,U-Pb zircon ages,and provenance (Bohemian Massif,Czech Republic)

The Teplá-Barrandian unit (TBU) of the Bohemian Massif was a part of the Avalonian-Cadomian belt at the northern margin of Gondwana during Neoproterozoic and Early Cambrian times. New detrital zircon ages and geochemical compositions of Late Neoproterozoic siliciclastic sediments confirm a deposition of the volcano-sedimentary successions of the TBU in a back-arc basin. A change in the geotectonic regime from convergence to transtension was completed by the time of the Precambrian-Cambrian boundary. The accumulation of around 2,500 m Lower Cambrian continental siliciclastics in a Basin-and-Range-type setting was accompanied by magmatism, which shows within-plate features in a few cases, but is predominantly derived from anatectic melts displaying the inherited island arc signature of their Cadomian source rocks. The geochemistry of clastic sediments suggests a deposition in a rift or strike-slip-related basin, respectively. A marine transgression during Middle Cambrian times indicates markedly thinned crust after the Cadomian orogeny. Upper Cambrian magmatism is represented by 1,500 m of subaerial andesites and rhyolites demonstrating several geochemical characteristics of an intra-plate setting. Zircons from a rhyolite give a U-Pb-SHRIMP age of 499±4 Ma. The Cambrian sedimentary and magmatic succession of the TBU records the beginning of an important rifting event at the northern margin of Gondwana.

保山地块西缘早古生代增生造山作用

在保山地块西缘泸水-潞西构造带内, 出露一套构造混杂岩.主体为强变形的震旦系-古生界蒲满哨群、公养河群浅变质碎屑岩夹碳酸盐岩及火山岩等复理石浊积岩系等构成, 另有硅质岩、杂砂岩、灰岩、砾岩、玄武岩及花岗岩等弱变形的构造块体.岩石时代从震旦纪至古生代, 跨度大, 高度混杂, 并有从东向西变新的逐势, 表现为后退式增生.构造样式早期为同斜倒转冲断作用的叠瓦构造, 后期表现为近N-S向剪切.玄武安山岩、流纹岩类具弧火山岩特征, 而玄武岩类则为板内火山岩, 2种火山岩分别对应岛弧与弧后拉张洋盆产物.寒武纪、奥陶纪侵位的花岗岩也分为东西2个带, 西晚东早, 代表了保山陆块西缘岩浆弧的一部分.这样就记录了洋壳俯冲消亡、增生楔形成过程的沉积、火山-岩浆、变质和构造变形的地质事件群, 也记录了保山地块西缘早古生代增生造山形成过程的地质事件, 并证明了泸水-潞西构造带在震旦纪-古生代存在一洋盆.      

Ordovician Macquarie Arc and turbidite fan relationships,Lachlan Orogen,southeastern Australia: stratigraphic and tectonic problems

Ordovician rocks of the Lachlan Orogen consist of two major associations, mafic to intermediate volcanic and volcaniclastic rocks (Macquarie Arc), which aerially comprise several north–south-trending belts, and the quartz-rich turbidite succession. Relationships between these associations are integral to resolving their tectonic settings and opinions range between contacts being major thrusts, combinations of various types of faults, and stratigraphic contacts with structural complications. Stratigraphic contacts between these associations are found with volcaniclastic-dominant units overlying quartz-turbidite units along the eastern boundary of the eastern volcanic belt and along the southern boundary of the central volcanic belt. Mixing between these major associations is limited and reflects waning quartzose turbidite deposition along a gently sloping sea floor not penetrating steeper volcaniclastic aprons that were developing around the growing volcanic centres formed during late Middle Ordovician to early Silurian Macquarie Arc igneous activity. An island arc setting has been most widely supported for the Macquarie Arc, but the identification and polarity of the associated subduction zone remain a contentious issue particularly for the Early Ordovician phase of igneous activity. The Macquarie Arc initiated within a Cambrian backarc formed by sea-floor spreading behind a boninitic island arc and presumably reflects a renewed response to regional convergence as subduction ceased along the Ross–Delamerian convergent boundary at the East Gondwana continental margin. An extensional episode accompanied initiation of the late Middle Ordovician expansion in island arc development. A SSE-dipping subduction zone is considered to have formed the Macquarie Arc and underwent anticlockwise rotation about an Euler pole at the western termination of the island arc. This resulted in widespread deformation west of the Macquarie Arc in the Benambran Orogeny and development of subduction along the eastern margin of the orogenic belt.