Crustal structure using receiver function in the east part of A’nyêmaqên suture belt

Twenty broadband seismographs were deployed along Hongyuan, Sichuan to Wuwei, Gansu. 81 teleseismic events were recorded in one year. We computed receiver functions from teleseismic waveform data and obtained S wave velocity structure beneath each station along the profile by using receiver function inversion method. The results revealed that the crustal structure is very complex and crustal average S wave velocity is to be on the low side. Low velocity structure generally exists in the depth range of 10~40 km in the crust between Aba arc fault and northern edge fault of Qinling earth’s axis and it is a tectonic feature of complex geological process such as ancient A’nyêmaqên Tethys ocean from closing and side colliding to subducted plate exhumed or thrust rock slice lifted. The Moho is about 50 km depth along the profile and is slightly deeper in the south than in the north.     

Crustal structure using receiver function in the east part of A＇nyemaqen suture belt

Twenty broadband seismographs were deployed along Hongyuan, Sichuan to Wuwei, Gansu. 81 teleseismic events were recorded in one year. We computed receiver functions from teleseismic waveform data and obtained S wave velocity structure beneath each station along the profile by using receiver function inversion method. The results revealed that the crustal structure is very complex and crustal average S wave velocity is to be on the low side. Low velocity structure generally exists in the depth range of 10～40 km in the crust between Aba arc fault and northern edge fault of Qinling earth＇s axis and it is a tectonic feature of complex geological process such as ancient A＇nyemaqen Tethys ocean from closing and side colliding to subducted plate exhumed or thrust rock slice lifted. The Moho is about 50 km depth along the profile and is slightly deeper in the south than in the north.     

垂直和倾斜断层围陷波的谱元法数值模拟及其波场特征对比

Fault zone trapped waves( F ZTWs) m ainly travel along the fractured fault zone( F Z)which is of low velocity and high attenuation. FZTWs often carry significant information about a fault  s internal structure,so it is important to understand their wave field characteristics for FZ structure inversion. Most previous simulations are based on vertical faults,while in this paper we implement the FZTW simulations on vertical or inclined faults and compare their wave fields in both time and frequency domains. The results show that the existence of fault zone and inclined angle of fault can significantly influence the features of waves near faults. In amplitude,a fault zone can generate a larger amplitude of waves. The velocity contrast between two walls of fault may lead to amplification of amplitudes in the low velocity fault wall. In frequency,a fault zone tends to influence the waves in the low frequency range. In a pattern of particle polarization of FZTWs,it tends to be single direction for vertical faults but fork to multiple directions for inclined faults,which might provide a new way to study the fault zone with FZTWs. These conclusions may be valuable for FZ structure inversion,and will enhance the knowledge on near-fault strong ground motions.     

Shallow velocity structure and hidden faults of Kunming city region

In order to image the 3-D velocity structure of its shallow crust in Kunming region,China,finite-difference seis-mic tomography is used to invert the seismic data selected carefully from six-shot data. The result lays a founda-tion for the discussion of the relationship between the obtained velocity structure and the hidden faults,and for the illumination of the depth extents of main active faults surrounding Kunming city. Puduhe-Xishan fault lies on the western margin of the Kunming basin and is just situated on the west edge of the low velocity anomaly zone found at all depth levels. This indicates that this fault is a borderline fault of the Kunming basin. It can be concluded that the fault dips eastwards with a steep angle and its depth extent is large. Puji-Hanjiacun fault and Heilong-tan-Guandu fault play a role in controlling the low velocity anomaly zone in middle basin. The depth extents of the two faults are comparatively small,without traversing the interface of basin floor.     

Study on the velocity structure of the crust in Southwest Yunnan of the north-south seismic belt—Results from the Menghai-Gengma-Lushui deep seismic sounding profile

Southwest Yunnan, located in the southern segment of the north-south seismic belt, is one of the regions with strong tectonic movement and seismic activity in China. Study on the characteristics of tectonic setting and deep geophysical field in the region is an important issue in basic science. In 2013, we conducted a 600-km-long Menghai-Gengma-Lushui profile of deep seismic wide-angle reflection/refraction and high-resolution seismic refraction in Southwest Yunnan. In this paper, we use 6 groups of clear intracrustal P-wave phases picked from the seismic record sections of 11 shots to build a velocity structure model of basement and 2D crustal P-wave of the region by using finite difference inversion and ray travel time forward fitting technology. The results show that, from south to north, the crust gradually thickens along the profile and its basement shows a significant lateral heterogeneity. In the vicinity of the Nanting River fault, the basement structure shows the character of alternate depressions and uplifts, and the shallowest basement is about 1.0 km. In the vicinity of Tengchong and Lancang, the basement is about 5.0 km deep. The velocity of the middle and lower crust in the region generally increases with the increasing of depth. At the block boundary and beneath the fault tectonic belt, the velocity contours show apparent irregularity and the P-wave velocity changes sharply. In this region, the Moho gradually deepens from south to north with relatively large lateral undulations. The shallowest point of the Moho is located near Menghai at a depth of about 32.0 km. The deepest point of the Moho is located near Tengchong at a depth of about 40.5 km. Between Gengma and Yongde, the Moho shows significantly fast uplifting and depressing with an amplitude of about 4.0 km. Beneath the Nanting River fault, Longling-Ruili fault, Dayingjiang fault and Tengchong volcano, the basement velocity structure, 2D crustal P-wave velocity structure, distribution of average profile velocity and intracrustal interface spreading also show significant changes from the basement to the top of the Moho, indicating that the crustal velocity and medium physical properties beneath the fault tectonic belt are apparently different from the crustal materials on its both sides, which suggests that these faults should be in a certain scale and may extend to the lower crust or the top of the upper mantle. The earthquakes in the region mainly occurred at a depth of 10–20 km, and the seismic activity is related to the intracrustal medium velocity difference and fault belt distribution. The results can serve as the important data of the crust-mantle structure for the analysis of the deep tectonic setting, earthquake precise positioning, seismogenic structure modeling of the seismic activities in Southwest Yunnan, as well as the important reference for the evaluation of seismic hazard and the planning of earthquake disaster mitigation of this region.     

Surface Wave Group Velocity Tomography Imaging from Ambient Noise for Fujian Province and Its Adjacent Areas

Two-month continuous waveforms of 108 broadband seismic stations in Fujian Province and its adjacent areas are used to compute noise cross-correlation function (NCF). The signal quality of NCF is improved via the application of time-frequency phase weighted stacking. The Rayleigh and Love waves group velocities between 1s-20s are measured on the symmetrical component of the NCF with the multiple filter method. More than 5,000 Rayleigh wave dispersion curves and about 4,000 Love wave dispersion curves are obtained and used to invert for group velocity maps. This data set provides about 50km resolution that is demonstrated with checkerboard tests. Considering the off great circle effect in inhomogeneous medium, the ray path is traced based on the travel time field computed with a finite difference method. The inverted group velocity maps show good correlation with the geological features in the upper and middle crust. The Fuzhou basin and Zhangzhou basin showed low velocity on the short period group velocity maps. On the long period group velocity maps, the low velocity anomaly in the high heat flow region near Zhangzhou and clear velocity contrast across the Zhenghe-Dapu faults, which suggests that the Zhenghe-Dapu fault might be a deep fault.     

Seismotectonic Study on the West Part of the Interaction Zone Between Southern Tianshan and Northern Tarim

The interaction zone between southern Tianshan and northern Tarim is located at the northeast side of Pamir. It is a region with high seismicity. We constructed a seismotectonic model for the west part of this zone from geological profiles, deep crust seismic detection and earthquake focal mechanisms data. Based on the synthesized geological features, deep crust structure, and earthquake focal mechanisms, we think that the main regional tectonic feature is that the Tianshan tecto-lithostratigraphic unit overthrusts on the Tarim block. The Tianshan tectonic system includes the Maidan fault and thrust sheets in front of the fault; The Tarim tectonic system includes the underground northern Tarim margin fault, conjugate faults in basement and overthrust fault in shallow. The northern Tarim margin fault is a high angle fault deep in the Tarim crust, adjusting different trending deformation between Tianshan and Tarim. It is a major active fault that can generate large earthquakes. The other faults, such as the Tianshan overthrust system and the Tarim basement faults in this area may generate moderately strong earthquakes with different styles.     

基于背景噪声的宁夏及邻区瑞利波层析成像

In this article,the vertical components of the continuous waveform data of 90 seismic stations in Ningxia and its adjacent regions recorded from January 2012 to December 2013 are used to obtain the Rayleigh surface wave group velocity dispersion images in the study area( 101°- 112°E,31°-42°N) according to the method of noise imaging,with period between 6s - 50s and resolution of 0.5°. The Yinchuan basin in the 6s - 26 s period obviously shows a low velocity anomaly,which is not uniform and has a tendency to gradually weaken; the Guanzhong Basin in 6 s-22s shows a strip of low velocity anomaly and demonstrates a transverse inhomogeneity,where velocity in the southeast is slightly faster than that in the northwest. In the 30s - 50s period it shows that in the Yinchuan graben basin and its southern area,there is a large low velocity anomaly area,which moves from northeast to southwest. It shows that between the main active tectonic zones,like mountains and basins,there are obvious geomorphologic boundaries. For example,the deep fault near Liupan Mountain is the dividing line between two large tectonic units of eastern and western of China. The inversion results have good correlation with the geological structure and the stratigraphic landform. The results are consistent with the results of artificial seismic section tomography across the basin. It provides an important basis for the dynamics of active tectonic zones and the mechanism of earthquake occurrence in this area.     

Mantle anisotropy across the southwestern boundary of the Ordos block,North China

Located at the northeastern margin of the Tibetan plateau,the Ordos block is a stable tectonic unit in North China.With its active boundary fault zones,the Ordos block played an important role in the eastward extrusion mechanism of the Tibetan plateau.Peking University deployed a linear array of 15 portable broadband seismometers across the western Weihe graben during September 2005 to August 2006 and later a 2-D seismic array(Southwest Ordos Array) of 14 portable broadband seismometers during 2007-2008 at its southwestern boundary.Analyses of shear wave splitting of SKS and SKKS phases at these stations show that the fast directions trend ～110° with an average delay time of 0.9 s in the southwestern margin of the Ordos block.The agreement between the lithosphere deformation indicated by GPS data and Quaternary fault slip-rate observations and the mantle flow represented by shear wave splitting implies that accordant deformation patterns from lithosphere to asthenosphere in relation to the eastward extrusion of the Tibetan plateau could extend at least to 200 km depth.Spatial distribution of splitting polarization directions indicates that the mantle flow driven by the Tibetan plateau is blocked by the Ordos block and locally restricted in a narrow channel along the Qinling-Dabie fault zones between the Ordos block and Sichuan basin.     

Discovery of the Longriba fault zone in eastern Bayan Har block,China and its tectonic implication

Re-measured GPS data have recently revealed that a broad NE trending dextral shear zone exists in the eastern Bayan Har block about 200 km northwest of the Longmenshan thrust on the eastern margin of the Qinghai-Tibet Plateau. The strain rate along this shear zone may reach up to 4-6 mm/a. Our interpretation of satellite images and field observations indicate that this dextral shear zone corresponds to a newly generated NE trending Longriba fault zone that has been ignored before. The northeast segment of the Longriba fault zone consists of two subparallel N54°±5°E trending branch faults about 30 km apart, and late Quaternary offset landforms are well developed along the strands of these two branch faults. The northern branch fault, the Longriqu fault, has relatively large reverse component, while the southern branch fault, the Maoergai fault, is a pure right-lateral strike slip fault. According to vector synthesizing principle, the average right-lateral strike slip rate along the Longriba fault zone in the late Quaternary is calculated to be 5.4±2.0 mm/a, the vertical slip rate to be 0.7 mm/a, and the rate of crustal shortening to be 0.55 mm/a. The discovery of the Longriba fault zone may provide a new insight into the tectonics and dynamics of the eastern margin of the Qinghai-Tibet Plateau. Taken the Longriba fault zone as a boundary, the Bayan Har block is divided into two sub-blocks: the Ahba sub-block in the west and the Longmenshan sub-block in the east. The shortening and uplifting of the Longmenshan sub-block as a whole reflects that both the Longmenshan thrust and Longriba fault zone are subordinated to a back propagated nappe tectonic system that was formed during the southeastward motion of the Bayan Har block owing to intense resistance of the South China block. This nappe tectonic system has become a boundary tectonic type of an active block supporting crustal deformation along the eastern margin of the Qinghai-Tibet Plateau from late Cenozoic till now. The Longriba fault zone is just an active fault zone newly-generated in late Quaternary along this tectonic system.     

天津滨海地区浅层剪切波速与基底构造关系研究

剪切波速是反映土体动力学特性的重要物理量之一,在土木工程抗震中有广泛的应用.本文收集整理了天津滨海地区500余口横波测井资料,在经纬向与垂直向以0.01°×0.01°x1m的三维网格进行线性插值,获得了天津滨海地区近地表剪切波速空间分布的精细图像.根据资料分布与地质构造背景,选取2个代表性波速剖面进行分析.结果表明,滨海地区浅部剪切波速结构具有明显的分层特征与横向不均匀性,进一步的分析认为,不同地质构造单元的速度结构具有明显差异,在大型区域或边界断裂两侧波速结构或受到扰动或受到明显影响,充分显示了天津滨海地区基底构造与断裂活动对晚第四纪沉积发展和地层发育的控制以及对工程地震地质条件评价的影响.     

基于典型地质特征分析的大同盆地VS30预测研究

土体剪切波速是进行土层地震反应分析的动力学参数，对场地地震动参数确定具有重要意义。基于地质地貌分析，将大同盆地划分为5类典型地质单元。对盆地1429个钻孔剪切波速资料进行分析，探讨V_S30与V_S20的相关性，研究土体埋深、岩性、地质单元、标贯击数及密实度等地质特征对V_S的影响，并基于地质单元、剪切波速比、密实度系数及第四系上部覆盖层厚度相关性分析给出土体V_S30预测模型。研究结果表明，基于典型地质特征的V_S30预测模型拟合优度R2>0.90，预测精度很高，对于离散性较大、直接拟合估算较差及无剪切波速场地来说，以区分地质单元及土体类型的方式进行V_S30分解预测是良好的研究思路。首次在区分地质单元及土体类型的前提下提出剪切波速比及密实度系数，并将其与第四系上部覆盖层厚度综合应用于V_S30预测研究。研究结果可为大同盆地城市防震减灾规划、震害预测、区域性地震安全评价提供重要技术支撑。     

甘东南地区基于射线追踪面波频散三维成像

利用甘肃东南部地区(32.2°~33.5°N,102.7°~105.5°E)62个流动台站的垂直分量连续背景噪声记录数据,经过处理得到了所有可能台站对的面波互相关函数和瑞利波相速度频散曲线,采用基于射线追踪的面波频散直接反演方法得到了观测台站下方5~20km深度范围内的剪切波速度分布图像。结果表明,5km深度对应的剪切波速度横向变化与地表断裂带分布和沉积层厚度存在一定的相关性,西秦岭北缘断裂带以北地区多为低速区,漳县盆地、临洮盆地低速是沉积层较厚(近几km)的一种表征;10km深度对应的剪切波速度在西秦岭北缘断裂以南、临潭—宕昌断裂、礼县—罗家堡断裂之间的区域为低速区,光盖山—迭山北麓断裂周围为高速区;在15km深度左右,迭部—白龙江断裂附近形成了高低速相间的分块结构;在18km深度左右,西秦岭北缘断裂带附近呈现高速特征,10~18km深度范围内速度随深度逐渐增加,其变化幅度一般为0.2km/s。     

Shallow/upper crustal shear wave structure of the Tehran region (Central Alborz,Iran) from the inversion of Rayleigh wave dispersion measurements

Surface wave dispersion curves from microearthquakes are used to obtain group velocity dispersion maps. The calculation of the local dispersion curves for each grid point from these maps then produces the input data to retrieve the 3D shear wave velocity model of the Tehran region. The group velocity maps indicate that the tomographic results agree well with the three main tectonic features and the geological units in the study area. The tomographic maps generally possess high-velocity structures across most of the mountain belts (Central Alborz and east-southeast mountains), whereas the Tehran Basin correlates to a low-velocity structure. Increasing the period in the study area highlights four independent low-velocity zones that reflect faults and fault junction systems. The shear wave velocity profiles indicate that the depth to bedrock exhibits southward variation ranging from ~?300 m to ~?1500 m. We also focus our analysis on the existence of faults within the shear wave profiles and discuss the low shear wave velocity anomalies deeper than 2 km result from the main fault structures (e.g., North Tehran, North-South Rey and Parchin). Furthermore, we argue that the dip angle of the North Tehran fault varies along fault strike, whereas the North-South Rey fault possesses a constant dip angle. Moreover, initial model uncertainties and checkerboard resolution tests are used to identify reliable and robust anomaly features in the 3D shear wave velocity model and 2D tomographic maps, respectively. Microearthquake analysis provides an effective approach for studying the upper crustal structure heterogeneity, especially the fault structure, of the Tehran region.     

Geometric form of Haiyuan fault zone in the crustal interior and dynamics implications

The deep seismic reflection data on profile HY2 are reprocessed by the method of simultaneous inversion of velocity distribution and interface position. By the travel-time inversion with the data of the diving wave Pg and fault plane reflection wave, we determine the geometric form and velocity of Haiyuan fault zone interior and surrounding rock down to 10 km depth. The measured data show that the amplitudes have strong attenuation in the range of stake number 37–39 km, suggesting the fault zone has considerable width in the crustal interior. The results of this paper indicate that to the north of the fault zone the crystalline basement interface upheaves gradually from southwest to northeast and becomes shallow gradually towards northeast, and that to the south of the fault zone, within the basin between Xihua and Nanhua mountains, the folded basement becomes shallow gradually towards southwest. The obliquity of the fault zone is about 70° above the 3 km depth, about 60° in the range of the 3–10 km depths. From the results of this paper and other various citations, we believe that Haiyuan fault zone is in steep state from the Earth’s surface to the depth of 10 km. Foundation item: Joint Seismological Science Foundation of China (201001) and State Key Basic Research Development and Programming Project (95-13-02-02). Contribution No. RCEG200308, Exploration Geophysical Center, China Earthquake Administration.     

APPLICATION AND STATISTICAL ANALYSIS OF RELATIONSHIP BETWEEN SHEAR WAVE VELOCITY AND DEPTH OF SOIL-LAYERS

The shear wave velocity is one of the important parameters in seismic engineering.The common mathematical models of relationship between shear wave velocity and depth of soil-layers are linear function model,quadratic function model,power function model,cubic function model,and quartic function model.It is generally believed that the regression formulae based on aforementioned mathematical models are mainly used for preliminary estimation of the local shear wave velocity.In order to increase the value of test data of wave speed in boreholes,the calculation formulae for the thickness of ground cover layer are derived based on the aforementioned mathematical models and their fitting parameters.The calculation formulae for the mean shear wave velocity of soil-layers are derived by integral mean value theorem.Accordingly,the calculation formulae for the equivalent shear wave velocity of soil-layers are derived.The calculation formulae for the depth of reflective waves in time-depth conversion of the reflection seismic exploration are derived.Through the statistical analysis of test data of shear wave velocity of soil layers in Changyuan County,Henan Province,regression formulae and their fitting parameters of aforementioned mathematical models are obtained.The results show that in the determination of the quality of these regression formulae and their fitting parameters,the adjusted R-square,root mean square error and residual error,the matching on the statistical range between the geometry of function of mathematical models used and the scattergram of the measured data,the application purpose and the simplicity of the regression formulae should be considered.With the aforementioned new formulae,the results show that the calculated values of equivalent shear wave velocity of soil-layers and thickness of ground cover layer meet the engineering needs.The steps for statistics and applications of the relationship between shear wave velocity and depth of soil-layers for a new area are as follows:(1) Analyze the relevant data about the site such as the drilling and wave speed test data,etc.and divide the site into seismic engineering geological units;(2) In a single seismic engineering geological unit,make statistical analysis of the data of borehole wave speed test,comprehensively identify and select mathematical models and their fitting parameters of the relationship between shear wave velocity and depth of soil-layers;(3) Substitute the selected fitting parameters into the formulae,based on their mathematical models for the thickness of ground cover layer,or the equivalent shear wave velocity of soil-layers,or the depth of reflective wave,then the thickness of ground covering layer,equivalent shear wave velocity,and depth of reflective wave are obtained.     

郯庐断裂带中南段及邻区Pn波速度结构与各向异性

郯庐断裂带是一条纵贯我国大陆东部NNE走向的巨型深断裂,其中南段及邻区(115°E—122°E,29°N—38°N)跨越了华北断块区、扬子断块区和华南褶皱系三大一级构造单元,由于其重要性和复杂性,长期以来一直是地学家们研究的热点.本文从国际地震中心(ISC)、中国地震台网及区域地震台网的地震观测报告中精心挑选出6381个Pn震相数据,用Pn波时间项层析成像法反演得到了郯庐断裂带中南段及邻区上地幔顶部Pn波速度结构和各向异性.结果显示,研究区上地幔顶部具有显著的横向非均匀性,相对于7.95km·s-1的平均速度而言,Pn波速度值在7.68~8.24km·s-1范围内变化.Pn波速度分布在郯庐断裂带中段和南段具有分段性:沿中段及周边存在一NE向低速异常带,低速可能是由于岩石圈的减薄和软流圈的高温物质沿郯庐带上涌导致;沿南段表现为一NNE向弱高波速异常带,作为高低速的边界带清晰地勾勒出了华北与扬子这两个不同块体,该边界在江苏域向华北地块NW方向凹进.Pn波速度各向异性的强弱与速度分布存在一定的相关性.总体上,如鲁西隆起及以南等低速区、茅山断裂附近的高低速过渡带,其速度各向异性较为强烈;而在具有高速异常的苏北盆地、合肥盆地等稳定区域下方其各向异性较弱.本文通过Pn波震相基本未能探测到郯庐断裂带中段的方位各向异性,推测是上地幔顶部被"冻结"下来的各向异性痕迹被软流圈热物质上涌这一强烈构造运动削弱所导致.南段具有与断裂伸展方向近乎平行的快波速方向.Pn波速度横向变化和强震活动存在一定关联.强震主要发生在Pn波低速异常区或高低速过渡带上.郯城8.5级地震震中位于中段和南段高低速过渡带,该区域也是速度横向变化最大的地方,最容易集中应力和产生应力差.     

郯庐断裂带中南段及邻区基于背景噪声的瑞利波群速度层析成像

本文收集了郯庐断裂带中南段及邻区省属和市县地震台网共261个宽频带地震台站2015年1月至2016年12月间的垂直向连续波形资料,利用长时间序列背景噪声互相关法提取台站对之间的经验格林函数,采用时频分析法提取瑞利面波混合路径频散曲线.通过质量控制和严格筛选后得到了15627条路径上的群速度频散曲线,重新构建了郯庐断裂带中南段及邻区瑞利波5～50s、分辨率为0.75°×0.75°的群速度分布图像.分析研究了6个周期的群速度分布图像和3条不同方向的纵向周期剖面,这些图像揭示了郯庐断裂带中南段及邻区地壳上地幔速度结构具有横向分块和纵向成层的非均匀性特征.结果表明,短周期(6s、10s)的群速度分布与地表地质和构造特征密切相关.拥有较厚沉积层的苏北盆地、合肥盆地及河淮盆地等显示为低速,而基岩广泛出露的鲁西隆起、大别—苏鲁造山带、扬子克拉通及华南褶皱系则呈现出大面积的高速异常.随着周期的递增(15s、20s),群速度分布受地表地质构造的影响逐渐弱化.受地壳厚度和莫霍面附近的速度差异影响,大别和苏鲁地区在较长周期(25s、30s)群速度图上表现出相对较低的速度,这可能与这些地方Moho面埋藏较深有关.纵向剖面显示,苏鲁—大别造山带及其高压、超高压变质带不仅在浅地表具有基本相同的地形地貌和构造特征,地壳内也有着极为相似的Rayleigh波群速度分布特征.壳内群速度分布总体上表现为上凸下凹状,形状似一"哑铃".上地壳具有上凸下凹的形态、相比邻区具有较高的群速度值;中地壳低速;下地壳上凸下凹且埋藏较深,反映出具有陆陆碰撞造山的残留山根特征.苏鲁及大别两地自浅地表至上地幔具有相似的Rayleigh波群速度分布不仅为二者被左旋走滑的郯庐带平移错开提供了佐证资料,同时也为郯庐带的形成与演化提供了地震学依据.     

High-resolution Rayleigh wave phase velocity maps from ambient noise tomography in North China

We presented high-resolution Rayleigh wave phase velocity maps at periods ranging from 5 s to 30 s in the northeast part of the North China Craton (NNCC). Continuous time-series of vertical component between October 2006 and December 2008, recorded by 187 broadband stations temporarily deployed in the NNCC region, have been cross-correlated to obtain estimated fundamental mode Rayleigh wave Greenos functions. Using the frequency and time analysis technique based on continuous wavelet transformation, we measured 3 667 Rayleigh wave phase velocity dispersion curves. High-resolution phase velocity maps at periods of 5, 10, 20 and 30 s were reconstructed with grid size 0.25° × 0.25°, which reveal lateral heterogeneity of shear wave structure in the crust and upper mantle of NNCC. For periods shorter than 10 s, the phase velocity variations are well correlated with the principal geological units in the NNCC, with low-speed anomalies corresponding to the major sedimentary basins and high-speed anomalies coinciding with the main mountain ranges. Within the period range from 20 s to 30 s, high phase velocity observed in eastern NCC is coincident with the thin crust, whereas low phase velocities imaged in central NCC is correlated to the thick crust. However, the low-velocity anomaly in the Beijing-Tianjin-Tangshan region displayed in the 20 s and 30 s phase maps may be associated with fluids.     

利用非线性方法反演琉球-台湾-吕宋地区的岩石层P波速度结构

根据中国地震台网和ISC台站提供的P波走时资料,使用差异演化全局优化算法(DE算法)和移动窗方法反演了琉球-台湾-吕宋地区岩石层尺度的P波速度结构.在台站和地震分布较为密集的地区,反演窗口为2°×2°,移动步长为1°;在台站和地震较少的地区,反演窗口为4°×4°左右,移动步长为2°.反演结果揭示出琉球-台湾-吕宋地区壳幔结构的横向差异:琉球岛弧西侧受冲绳海槽地幔热扰动的地壳减薄,东侧由于菲律宾海板决的俯冲挤压地壳略有增厚;欧亚大陆与菲律宾海板块的相互碰撞导致台湾地区地壳及岩石层明显增厚;吕宋及菲律宾北部岩石层受岛弧火山下方热流影响较大.结果表明,非线性全局优化算法和移动窗方法能够用于反演较大尺度速度结构的横向变化.