Stratigraphic architecture of a tide‐influenced shelf‐edge delta,Upper Cretaceous Dorotea Formation,Magallanes‐Austral Basin,Patagonia

The Magallanes‐Austral Basin of Patagonian Chile and Argentina is a retroforeland basin associated with Late Cretaceous–Neogene uplift of the southern Andes. The Upper Cretaceous Dorotea Formation records the final phase of deposition in the Late Cretaceous foredeep, marked by southward progradation of a shelf‐edge delta and slope. In the Ultima Esperanza district of Chile, laterally extensive, depositional dip‐oriented exposures of the Dorotea Formation contain upper slope, delta‐front and delta plain facies. Marginal and shallow marine deposits include abundant indicators of tidal activity including inclined heterolithic stratification, heterolithic to sandy tidal bundles, bidirectional palaeocurrent indicators, flaser/wavy/lenticular bedding, heterolithic tidal flat deposits and a relatively low‐diversity Skolithos ichnofacies assemblage in delta plain facies. This work documents the stratigraphic architecture and evolution of the shelf‐edge delta that was significantly influenced by strong tidal activity. Sediment was delivered to a large slump scar on the shelf‐edge by a basin‐axial fluvial system, where it was significantly reworked and redistributed by tides. A network of tidally modified mouth bars and tidal channels comprised the outermost reaches of the delta complex, which constituted the staging area and initiation point for gravity flows that dominated the slope and deeper basin. The extent of tidal influence on the Dorotea delta also has important implications for Magallanes‐Austral Basin palaeogeography. Prior studies establish axial foreland palaeodrainage, long‐term southward palaeotransport directions and large‐scale topographic confinement within the foredeep throughout Late Cretaceous time. Abundant tidal features in Dorotea Formation strata further suggest that the Magallanes‐Austral Basin was significantly embayed. This ‘Magallanes embayment’ was formed by an impinging fold–thrust belt to the west and a broad forebulge region to the east.     

准噶尔盆地南缘前陆冲断带深层地质结构及对油气藏的控制作用:以霍尔果斯—玛纳斯—吐谷鲁褶皱冲断带为例

准噶尔盆地南缘前陆冲断带位于天山北麓,在晚新生代强烈的挤压作用下,地表发育数排背斜带。由于构造变形复杂、地震反射成像质量较差,对深层地质结构争议较大,另外前新生代盆地原型对晚新生代以来的褶皱冲断带构造格局的影响也尚未探讨。霍尔果斯—玛纳斯—吐谷鲁(简称霍-玛-吐)褶皱冲断带位于准噶尔盆地南缘前陆冲断带地表第二排背斜带,利用最新采集和处理的地震反射资料,并结合地表地质露头建立深层构造模型;利用平衡地质剖面复原和构造物理模拟实验的方法探索早侏罗世盆地原型结构对现今褶皱冲断带构造格局的影响;在此基础上分析霍-玛-吐褶皱冲断带深层天然气富集规律。霍-玛-吐褶皱冲断带垂向上发育古近系—第四系逆冲推覆构造、中上侏罗统—白垩系构造楔和下侏罗统半地堑断陷结构。控制早侏罗世半地堑系统的高角度正断层在晚期挤压构造变形体系中充当逆断坡,并控制上覆构造楔和浅层逆冲推覆构造的发育。早侏罗世半地堑系统具有分段性,并通过侧向断坡进行连接,侧向断坡上覆地层发育南北向走滑调节断层。油气勘探现状表明,霍-玛-吐褶皱冲断带内部南北向走滑调节断层具有高效沟通下侏罗统烃源岩的特点,是控制天然气的富集的重要因素。以上研究表明,中西部陆内前陆冲断带前新生代古构造对于晚新生代挤压冲断构造格局和深层天然气富集规律具有重要意义。     

塔里木盆地中南部麻扎塔格逆冲—褶皱带变形特征及其意义

麻扎塔格地区地层、地貌及构造变形特征的研究,对于认识塔里木盆地新生代构造演化过程、塔里木—西昆仑的盆山耦合关系、新构造运动对塔里木油气资源分布的影响以及塔克拉玛干沙漠的气候、环境变化都具有重要意义。本文通过卫星照片解译、野外变形观察、剖面实测、地球物理资料解释等手段,对该地区晚新生代的构造特征进行了研究,确定了麻扎塔格构造带为典型的逆冲—褶皱带,并探讨了麻扎塔格逆冲—褶皱带的构造指向、活动时限、隆升速率及缩短速率、东西方向的延伸等问题,取得如下认识:1)麻扎塔格逆冲—褶皱带为西昆仑山前陆褶皱冲断带的前缘部位,和田河气田就是处在逆冲前锋背斜顶部,晚新生代变形作用已明显地改造了塔里木盆地南部及中部的古生代和中生代构造,并促成了和田河气田的形成;2)麻扎塔格山在中新世末(约7 Ma)和中更新世(约780 ka B.P.)经历了两次构造隆升,后一次形成了麻扎塔格逆冲—褶皱带和麻扎塔格山现今的地貌特征;3)估算出麻扎塔格逆冲—褶皱带中更新世以来的隆升速率约为0.26～0.4 mm/a,缩短速率约为0.9 mm/a;4)认为麻扎塔格逆冲—褶皱带向西应与同属西昆仑山前褶皱—冲断带前缘的喀什背斜相连,东端的突然消失可能是由于东段和田河附近存在北东—南西向的走滑断层造成。     

库车-喀什北缘山前带构造特征及成因分析

通过地震非地震联合解释及多年的勘探研究,认为受基底结构、构造演化、逆冲及走滑断裂等影响,库车-喀什北缘山前冲断带具有东西分段、南北分带的构造特征。自西向东分为喀什北缘、柯坪断隆和库车坳陷三大段,受近南北向逆冲挤压作用,每段均发育多排北东-南西向展布的逆冲褶皱带,其中库车坳陷主要由克拉苏、依奇克里克、秋里塔格构造带及乌什、拜城、阳霞凹陷等呈斜列式展布的次级构造单元组成。普遍发育的膏盐岩塑性层在一系列逆冲和走滑断裂的作用下,使得山前带构造样式更为复杂,发育断层转折褶皱、断层传播褶皱、滑脱褶皱和盐底辟(刺穿)构造等四种基本构造样式及多种组合样式。     

Shallow high-resolution seismics and reprocessing of industry profiles in southern Bavaria: The Molasse and the northern Alpine front

The purpose of this seismic investigation in the Upper Bavarian Miesbach area, as part of the international TRANSALP project, was to study the tectonic contact between the autochthonous Foreland Molasse and the allochthonous Folded Molasse marking the tectonic front of the Alpine orogen. Another specific target was the dip of the frontal emerging main thrust of the tectonic units Helveticum/Ultrahelveticum and Rhenodanubian Flysch overriding the Folded Molasse. Twelve seismic profiles obtained from the hydrocarbon industry were reprocessed. From the Foreland Molasse southward to the Autochthonous Molasse in the subsurface of the overthrust Folded Molasse conspicuous features such as steep normal faults at the Molasse base, S-directed thickening of Molasse sediments or sedimentary discordant base of Upper Marine Molasse can be recognized.Shallow high-resolution seismic measurements were conducted along two profiles across the tectonic contact between Foreland Molasse and Folded Molasse, as well as along a profile across the frontal emerging main thrust of the Helveticum/Ultrahelveticum and the Rhenodanubian Flysch. Geological structures could be identified in the top 300–500 ms two-way traveltime interval, which is hardly possible with the usual deep-seismic method. The method thus provides a bridge between deep-reflection seismics and surface geology.In contrast to the western Bavarian Molasse zone, the tectonic boundary between the Foreland Molasse and the Folded Molasse in the investigated area is not characterized by a large blind-thrust triangle zone but by a simple south-dipping thrust plane. Adjacent to the S follow several steeply south-dipping inverse Molasse thrust slices and the Miesbach syncline. The inverse thrust slices are interpreted as the overturned and sheared northern limb of a fault propagation fold, which linked the Folded Molasse to the Foreland Molasse during a final orogenic phase.The main thrust of the Helveticum/Ultrahelveticum and the Rhenodanubian Flysch are well imaged in the near-surface interval of the high-resolution reflection seismic data. In contrast to previously published results, these thrust planes show a gentle dip to the S from the surface down to at least 500–1000 m depth.     

Detecting the stepwise propagation of the Eastern Sicily thrust belt (Italy): insight from thermal and thermochronological constraints

An extensive dataset of vitrinite reflectance, FTIR parameters on organic matter, illite content in mixed layers illite‐smectite, apatite fission tracks and U‐Th/He dating has been used to reconstruct the stepwise propagation of the Eastern Sicily fold‐and‐thrust belt during Late Palaeogene and Neogene times. The results indicate that the fold‐and‐thrust belt is divisible into two levels of thermal maturity. These levels consist of a less evolved level of thermal maturity that records limited sedimentary burial and minor heating, and a more evolved level of thermal maturity that indicates tectonic burial and exhumation at different times. Deformation and exhumation of shallowly buried units are linked to wedge forward propagation by low‐angle thrusts, whereas the evolution of deeply buried units is associated with tectonic imbrications by duplex formation and steep thrusts. The two tectonic styles alternate during evolution of the fold‐and‐thrust belt under low erosion rates.     

准南逆冲褶皱带超压与逆冲断层持续活动

天山北缘准南地区的褶皱带为自新生代以来一直持续活动的逆冲构造带,由于逆冲断层的持续活动,形成了现今断层和相关褶皱。钻井资料显示,准南逆冲褶皱带内的超压层主要发育在古近纪安集海河组泥岩和紫泥泉子组泥岩之中,而该泥岩同时又成为逆冲断层发育的主滑脱面。通过多年来对准南地区地面地质调查、二维地震和三维地震资料的解释以及钻井证实,我们统计出准南逆冲褶皱带现存的逆冲断层倾角分别集中在两个区间: 30±5°和50±5°区间。应力分析表明,在持续挤压应力作用下,超压层(泥岩、页岩和煤系地层)中和超压层之下地层中发育的早期逆冲断层与晚期最大主压应力之间的夹角处在30±5°之间时,作用在断层面上的最大主应力与最小主应力比达到最小值,因此该断层最容易再次活动,形成最大的流体压力,因而断层周围的流体就会沿着最大主应力方向发生流动,断层本身就会成为流体运移的主要通道; 而早期逆冲断层与晚期最大主压应力之间的夹角处在50±5°之间时,作用在断层面上的最大主应力与最小主应力比较大,断层重新活动所需要的流体压力较高,导致断层作为流体运移的通道因被挤压而闭合。应力分析和钻井实测应力均指出,准南逆冲褶皱带发育的超压为挤压构造应力形成的超压。这些研究表明,准南逆冲褶皱带的逆冲断层持续活动,导致早期发育的断层在晚期应力作用下,断层倾角聚集在两个优势区间,油气沿最大主压应力方向运移,聚集油气则沿断层滑动面发育形成构造超压,导致该区域油气长期处于运移与聚集的动平衡状态。     

Tectono–sedimentary Evolution of the Late Triassic Xujiahe Formation in the Sichuan Basin

The early stage of Sichuan Basin formation was controlled by the convergence of three major Chinese continental blocks during the Indosinian orogeny that include South China,North China,and Qiangtang blocks.Although the Late Triassic Xujiahe Formation is assumed to represent the commencement of continental deposition in the Sichuan Basin,little research is available on the details of this particular stratum.Sequence stratigraphic analysis reveals that the Xujiahe Formation comprises four third-order depositional sequences.Moreover,two tectono-sedimentary evolution stages,deposition and denudation,have been identified.Typical wedge-shaped geometry revealed in a cross section of the southern Sichuan Basin normal to the Longmen Shan fold-thrust belt is displayed for the entire Xujiahe Formation.The depositional extent did not cover the Luzhou paleohigh during the LST1 to LST2 （LST,TST and HST mean Iowstand,transgressive and highstand systems tracts,1,2,3 and 4 represent depositional sequence 1,2,3 and 4）,deltaic and fluvial systems fed sediments from the Longmen Shan belt,Luzhou paleohigh,Hannan dome,and Daba Shan paleohigh into a foreland basin with a centrally located lake.The forebulge of the western Sichuan foreland basin was located southeast of the Luzhou paleohigh after LST2.According to the principle of nonmarine sequence stratigraphy and the lithology of the Xujiahe Formation,four thrusting events in the Longmen Shan fold-thrust belt were distinguished,corresponding to the basal boundaries of sequences 1,2,3,and 4.The northern Sichuan Basin was tilted after the deposition of sequence 3,inducing intensive erosion of sequences 3 and 4,and formation of wedge-shaped deposition geometry in sequence 4 from south to north.The tilting probably resulted from small-scale subduction and exhumation of the western South China block during the South and North China block collision.     

Structure and tectonic history of the foreland basins of southernmost South America

The common elements and differences of the neighboring Austral (Magallanes), Malvinas and South Malvinas (South Falkland) sedimentary basins are described and analyzed. The tectonic history of these basins involves Triassic to Jurassic crustal stretching, an ensuing Early Cretaceous thermal subsidence in the retroarc, followed by a Late Cretaceous–Paleogene compressional phase, and a Neogene to present-day deactivation of the fold–thrust belt dominated by wrench deformation. A concomitant Late Cretaceous onset of the foreland phase in the three basins and an integrated history during the Late Cretaceous–Cenozoic are proposed. The main lower Paleocene–lower Eocene initial foredeep depocenters were bounding the basement domain and are now deformed into the thin-skinned fold–thrust belts. A few extensional depocenters developed in the Austral and Malvinas basins during late Paleocene–early Eocene times due to a temporary extensional regime resulting from an acceleration in the separation rate between South America and Antarctica preceding the initial opening of the Drake Passage. These extensional depocenters were superimposed to the previous distal foredeep depocenter, postdating the initiation of the foredeep phase and the onset of compressional deformation. Another pervasive set of normal faults of Paleocene to Recent age that can be recognized throughout the basins are interpreted to be a consequence of flexural bending of the lithosphere, in agreement with a previous study from South Malvinas basin. Contractional deformation was replaced by transpressive kinematics during the Oligocene due to a major tectonic plate reorganization. Presently, while the South Malvinas basin is dominated by the transpressive uplift of its active margin with minor sediment supply, the westward basins undergo localized development of pull-apart depocenters and transpressional uplift of previous structures. The effective elastic thickness of the lithosphere for different sections of each basin is calculated using a dynamic finite element numerical model that simulates the lithospheric response to advancing tectonic load with active sedimentation.     

鄂尔多斯盆地西南部下白垩统宜君组砾岩砾组分析及其意义

运用砾组分析方法,结合邻区基岩地层,对鄂尔多斯盆地西南部下白垩统宜君组砾岩的砾性、砾度、砾态及砾向进行了研究,阐述了研究区不同区域砾岩的成分来源、成因、形成的水动力条件及古水流方向.表明宜君组砾岩为早白垩世初期干旱环境下山麓洪积扇-河流相沉积产物,具多物源和快速沉积的特点,砾石分选普遍较差,磨圆呈次棱角-次圆状,风化程...     

川西龙门山褶皱冲断带分带性变形特征

通过野外地质考察和地震资料解释,将龙门山褶皱冲断带划分为5个构造带,即青川-茂汶断裂以西为松潘-甘孜构造带,青川-茂汶断裂与北川-映秀断裂之间为韧性变形带,北川-映秀断裂与马角坝-通济场-双石断裂之间为基底卷入冲断带,马角坝-通济场-双石断裂与广元-关口-大邑断裂之间为前缘-褶皱冲断带,广元-关口-大邑断裂以东为前陆坳陷带,在构造变形特征上,各条断裂在演化上具有前展式特征,在松潘-甘孜构造带和韧性变形带构造变形强烈,形成推覆构造带等构造变形样式,在前缘-褶皱冲断带和前陆坳陷带,变形强度较弱,形成背冲断块或断层相关褶皱等构造,西北部区域的变形表现为塑性变形特征,向南东方向渐变为塑-脆性变形和脆性变形,在剖面上各条断裂所形成的深度向盆地方向逐渐递减。龙门山褶皱冲断带的分带性变形特征是由多种因素共同影响的结果,这些因素主要有板块构造背景的决定作用、多套滑脱层的控制作用和岩性因素的制约作用。     

巴布亚盆地褶皱带构造特征

巴布亚盆地的构造演化主要受控于陆内克拉通裂谷、冈瓦纳裂解、珊瑚海裂开、美拉尼西亚岛弧碰撞4个构造事件,它们共同影响并控制了该带的构造沉积演化和油气成藏。盆地内主要发育3个褶皱带,分别为伊利安褶皱带、巴布亚褶皱带和奥雷褶皱带,它们主要发育压缩构造样式,由于受到挤压应力的强弱变化,褶皱带构造挤压强度北强南弱,构造类型丰富多样。     

Lower Cretaceous provenance in the northern Austral basin of Patagonia from sedimentary petrography

The northern Austral basin from Patagonia is characterized by an Early Cretaceous (Barremian–Albian) coarse-grained regressive sequence. These littoral to continental deposits conform a 150 km long basin cropping out along the Southern Patagonian Andes between 47 and 48°S. The basin fill consist of basal deltaic sandstones with interbedded shales and limestones from the Río Belgrano Formation, topped by up to 350 m of fluvial conglomerates and reworked tuffs of the Río Tarde and Kachaike formations. This continental depocenter represent a major geodynamic and paleoenviromental change from the underling marine Río Mayer Formation. In this study we analyze the tectonic setting and provenance during deposition of the coarse-grained sequence using sedimentary petrography of 37 thin sections in four stratigraphic profiles covering the northern basin. Our dataset indicates mainly a recycled orogenic sandstones provenance, in agreement with potential surrounding basement sources.     

The North Patagonian orogenic front and related foreland evolution during the Miocene,analyzed from synorogenic sedimentation and U/Pb dating (∼42°S)

Miocene sedimentary successions of the Ñirihuau and Collón Cura formations east of the El Maitén Belt constitute a partial record of the Andean exhumation, defining a synorogenic infill of the Ñirihuau Basin in the foothills of the North Patagonian fold and thrust belt. Gravimetric and seismic data allow recognizing the internal arrangement and geometry of these depocenters that host both units, separating a synextensional section previous to the Andean development at these latitudes, from a series of syncontractional units above. A series of progressive unconformities in the upper terms shows the synorogenic character of these units corresponding to the different pulses of deformation that occurred during the middle Miocene. New U–Pb ages constrain these pulses to the ∼13.5–12.9 Ma interval and allow reconstructing the tectonic history of this region based on the detrital zircon source populations. The U–Pb maximum ages of sedimentation give to the Ñirihuau Formation in particular a younger age than previously assumed. Additionally, synsedimentary deformation in strata of the upper exposures of the Collón Cura Formation associated with contractional structures and U–Pb ages allow identifying a younger paleoseismogenic pulse in ∼11.3 Ma. Thus, based on these data and a compilation of previous datasets, a tectonic evolution is proposed characterized by a contractional episode that migrated eastwardly since ∼19 to 15 Ma producing the Gastre broken foreland and then retracted to the eastern North Patagonian Precordillera, where out-of-sequence thrusts cannibalized the wedge top zone in the El Maitén belt at ∼13.5–11.3 Ma.     

Differentiating glacio-eustacy and tectonics; a case study involving dinoflagellate cysts from the Eocene–Oligocene transition of the Pindos Foreland Basin (NW Greece)

In an attempt to discriminate between tectonically induced sea-level changes and glacio-eustacy, the Ekklissia and Arakthos sections (Epirus, NW Greece) are examined, applying (dinocyst) palynology, sedimentology and magnetostratigraphy. The sections, located in the Pindos Foreland Basin, both comprise the transition from pelagic limestones to hemipelagic silty clays and turbidite sandstones, reflecting the onset of flysch sedimentation as a result of the Pindos thrust activity. Despite an overall tectonic overprint, relative changes of sea level can be reconstructed, using (i) continental/marine palynomorph ratios, (ii) relative abundance of inshore and offshore dinoflagellate cysts, and (iii) taxa indicative of relatively cold and warm sea-surface temperature, that can be calibrated against the Global Polarity Time Scale (GPTS). Increased fluxes of marginal marine and continental palynomorphs coincide with colder periods on a 'third-order' scale, which thus appear to be related to glacio-eustatic trends in sea-level. The larger scale is attributed to the increasing effect of tectonics and acts on a 'second-order scale'.     

Structure of the Patagonian Andes: Regional Balanced Cross Section at 50° S,Argentina

A 100 km long balanced structural transect is presented for the Patagonian Andes at 50° S Latitude. The area studied is characterized by a fold belt in the eastern Andean foothills and basement-involved thrusts in a western-basement thrust zone. The basement thrust zone exposes pre-Jurassic, polydeformed sedimentary and layered metamorphic rocks emplaced over Lower Cretaceous rocks above an E-vergent thrust located at the western end of the fold belt.

The fold belt is developed in a 3 km thick deformed Cretaceous–Paleogene sedimentary cover with few basement outcrops and scarce calc-alkaline magmatism. Cover structures related to shallow décollements have a N-S to NW-SE strike, with fold wavelengths from 1100 to 370 m in the east to 20 to 40 m in the west. However, long-wavelength basement-involved structures related to deeper décollements have a dominant N-S to NE-SW trend along the eastern and western parts of the fold belt. Field evidence showing different degrees of inversion of N-S–trending normal faults suggests that the orientation of the Cenozoic compressive basement structures was inherited partially from the original geometry of Mesozoic normal faults.

The deformation propagated toward the foreland in at least two events of deformation. The effects of Paleogene (Eocene?) compressive episode are observed in the western fold belt and a Neogene (Late Miocene) compressive episode is present in the eastern fold belt. Basement-involved structures typically refold older cover structures, producing a mixed thick and thin-skinned structural style. By retrodeforming a regional balanced cross section in the fold belt, a minimum late Miocene shortening of 35 km (26%) was calculated.     

青藏高原东缘新生代构造层序与构造事件

新生代龙门山前盆地和盐源盆地是青藏高原东缘龙门山－锦屏山冲断带内及前缘地区发育和保存最好的新生代沉积盆地，本次以地层不整合面和ESR测年资料为主要依据，将该区新生代构造地层序列划分为5个构造层序，即TS1（65－55Ma)、TS2(40-50Ma)、TS3（23－16Ma)、TS4(4．7-1.6Ma)和TS5（0．74－0Ma)，据此将青藏高原东缘新生代构造变形和隆升事件划分为5期，其中TS1与喜马拉雅地体和拉萨地体拼合事件相关，TS2与印亚碰撞事件相关，TS3与青藏高原第一次隆升事件相关，TS4与青藏高原第二次隆升事件相关，TS5与青藏高原第三次隆升事件相关。     

塔里木盆地库车坳陷中部构造变形样式及分布特征

库车坳陷是塔里木盆地北部一个次级构造单元,受晚新生代陆内造山作用控制,发育典型的挤压冲断构造; 同时,由于古近系和新近系盐层的存在,发育丰富的盐相关构造; 另外,冲断构造各段之间的调节作用还形成了一系列的走滑构造。本文利用最新的2D、3D 地震资料及钻井资料,分析总结了库车坳陷中部的变形样式及分布特征。研究结果表明: 1)根据变形的成因机制,将库车坳陷的构造变形划分为收缩构造、盐构造及走滑构造。2)收缩构造以逆冲断层及褶皱样式为主,盐上构造层可划分为断层相关褶皱和褶皱相关断层,其中断层多在盐层内滑脱。盐下构造层根据断层组合方式可划分为叠瓦状冲断构造、楔形冲断构造及滑脱冲断构造。盐构造可以划分为盐席、盐墙、盐楔入、盐刺穿及盐拱构造。走滑构造在剖面上可见花状构造及不协调变形,平面上则可见雁列褶皱、马尾断层及海豚效应。3)收缩构造及盐构造主要分布于克拉苏构造带及秋里塔格构造带内,自南天山至盆地中心,盐下构造层由叠瓦状冲断构造过渡至滑脱冲断构造,过渡带内则发育楔形冲断构造; 走滑构造集中于坳陷西部的阿瓦特-却勒构造段以及东部的克拉3-东秋8构造段。     

Latest Triassic to Early Jurassic Thrusting and Exhumation in the Southern Ordos Basin,North China: Evidence from LA‐ICP‐MS‐based Apatite Fission Track Thermochronology

The contractional structures in the southern Ordos Basin recorded critical evidence for the interaction between Ordos Basin and Qinling Orogenic Collage. In this study, we performed apatite fission track(AFT) thermochronology to unravel the timing of thrusting and exhumation for the Laolongshan-Shengrenqiao Fault(LSF) in the southern Ordos Basin. The AFT ages from opposite sides of the LSF reveal a significant latest Triassic to Early Jurassic time-temperature discontinuity across this structure. Thermal modeling reveals at the latest Triassic to Early Jurassic, a ~50°C difference in temperature between opposite sides of the LSF currently exposed at the surface. This discontinuity is best interpreted by an episode of thrusting and exhumation of the LSF with ~1.7 km of net vertical displacement during the latest Triassic to Early Jurassic. These results, when combined with earlier thermochronological studies, stratigraphic contact relationship and tectono-sedimentary evolution, suggest that the southern Ordos Basin experienced coeval intense tectonic contraction and developed a north-vergent fold-and-thrust belt. Moreover, the southern Ordos Basin experienced a multi-stage differential exhumation during Mesozoic, including the latest Triassic to Early Jurassic and Late Jurassic to earliest Cretaceous thrust-driven exhumation as well as the Late Cretaceous overall exhumation. Specifically, the two thrust-driven exhumation events were related to tectonic stress propagation derived from the latest Triassic to Early Jurassic continued compression from Qinling Orogenic Collage and the Late Jurassic to earliest Cretaceous intracontinental orogeny of Qinling Orogenic Collage, respectively. By contrast, the Late Cretaceous overall exhumation event was related to the collision of an exotic terrain with the eastern margin of continental China at ~100 Ma.     

浙西北地区反转构造初步研究

通过浙西北地区金衢、乌马和杭嘉湖3个地震解译剖面及地表地质的综合分析,指出研究区在以T₂为主变形期的逆冲变形体制之前存在同方向的引张体制,并随后发生反转。通过计算反转比等综合分析,发现其总体反转程度自南东往北西方向逐渐变小,反映出反转后的褶皱冲断变形程度呈现自南东往北西方向变弱之趋势。