首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
综合运用岩石学、矿物学和地球化学方法,对石油充注鄂尔多斯盆地东南缘三叠系延长组砂岩储层后的成岩反应系 统进行了研究,揭示了石油充注对储层成岩环境的改变在一定程度上影响了本区储层成岩作用的演化。研究表明,该区延 长组长石砂岩储层在石油充注后有机酸和CO2大量出现,pH值降低,促进了岩石骨架颗粒长石的溶解,导致了次生孔隙的发 育,增强了储层的储集性能,但未能增加石英的溶解度;但是由于含油饱和度偏低,石油的充注使成岩环境的变化仅在很 小程度上抑制伊利石的生长,并没有完全阻止伊利石的生长,伊利石“搭桥”胶结孔隙,一定程度上降低了储层的储集性 能;同时石油的充注也使成岩早期形成的碳酸盐胶结物出现溶解,当成岩温度>100℃时,有机质热演化产生较高的CO2分 压,缓冲了pH值使含铁碳酸盐大量沉淀从而使储层致密化。石油充注对储层的这些影响对下一步的储层评价提供了重要依 据。  相似文献   

2.
通过岩石薄片、扫描电镜、镜质体反射率、X衍射、物性分析等资料,对东营断陷盆地古近系孔店组成岩演化及控制因素进行详细研究。研究结果表明:东营断陷盆地孔店组典型成岩现象有强烈压实作用、硬石膏胶结、多期次碳酸盐胶结、多期次粘土矿物胶结、硅质强烈胶结、矿物强烈穿插交代、碎屑颗粒和胶结物的溶解作用;其中,压实作用是引起深部碎屑岩强烈致密化的主要原因;硬石膏胶结、碳酸盐胶结、硅质胶结是引起致密化的又一重要原因;长石、碳酸盐胶结物的溶解作用是引起该地区储层改善的主要成岩因素;成岩演化经历了准同生期-中成岩B期,部分达到晚成岩期的演化过程,成岩演化过程控制了深部碎屑岩孔隙演化;并推断原始干旱-半干旱沉积环境、基准面变化、深埋藏环境、构造-岩浆活动是控制成岩及孔隙演化的主要因素。  相似文献   

3.
利用鄂尔多斯盆地LX地区山西组铸体薄片、扫描电镜、阴极发光、地球化学资料等,通过统计、计算等方法,对该区山西组储层岩石学特征、成岩作用类型、成岩演化阶段及成岩演化过程进行研究,在此基础上建立研究区山西组成岩相类型及划分标准,并最终确定了该区山西组成岩相平面展布特征。研究表明:压实和胶结作用是研究区山西组储层砂岩致密化的主要原因;成岩阶段主体已经进入中成岩B期;其成岩演化过程为早成岩A期的压实及少量胶结阶段,早成岩B期的压实及少量溶蚀及胶结阶段,中成岩A期的大量溶蚀和胶结阶段以及中成岩B期的碳酸盐胶结阶段;成岩相类型分为4类:中等压实-弱胶结-溶蚀相,中等压实-中等胶结-溶蚀相,中等压实-强胶结相,强压实-杂基强充填相;有利成岩相在研究区分布面积较广,说明研究区具备了良好的勘探潜力,尤其是发育在研究区的中等压实-弱胶结-溶蚀相区域,可作为该区山西组下一步勘探开发的重点。  相似文献   

4.
应用普通薄片、铸体薄片、扫描电镜、黏土矿物X射线衍射等多种测试手段,对海拉尔-塔木察格盆地南贝尔凹陷下白垩统铜钵庙组和南屯组火山碎屑岩储集层成岩演化特征进行了系统研究,并探讨了成岩演化的控制因素。研究认为,储集层成岩作用类型主要有熔结作用、压实作用、脱玻化作用、蚀变作用、胶结作用和溶蚀溶解作用,所处成岩作用阶段主要为中成岩阶段A期。储集层经历了同生成岩阶段-中成岩阶段A期的演化过程,局部储集层还经历了表生成岩阶段的演化过程。各成岩演化阶段特点均有所不同,其中,同生成岩阶段以熔结作用和弱胶结作用为特点,早成岩阶段A期以较强压实、弱胶结为特点,早成岩阶段B期的特点为较强压实、弱胶结、弱溶蚀,中成岩阶段A期为中等压实、较强胶结、较强溶蚀,表生成岩作用阶段以大气水淋滤作用为特点。成岩演化过程主要受成岩环境以及构造作用和火山活动的控制。储集层成岩环境大致经历了弱碱性-弱酸性-酸性-碱性的演化过程,酸性成岩环境以溶蚀溶解作用为主,碱性成岩环境胶结作用明显。构造作用和火山活动通过控制火山碎屑物质的来源、裂缝的产生、热流体活动以及表生成岩阶段的进行等来影响储集层的成岩演化。  相似文献   

5.
The dolomitic rocks of the Fengcheng Formation are considered to be formed under special geologic conditions, and are significant hydrocarbon reservoir rocks in the Wu-Xia area in the Junggar Basin. Analyses of petrologic characteristics and stable isotope composition indicate that the dolomitizing host rock is volcanic and the dolomitizing fluids probably consists of brine from shore-shallow lakes with great evaporation and salinity in the Fengcheng Formation, which have formed under arid climatic conditions, as well as residual Mg-rich seawater from the underlying Jiamuhe Formation and Carboniferous. Dust tuff in the area has significant plagioclase content. Anorthite and labradorite hydrolysis by CO2 can be coupled with calcite precipitation. Late Mg-rich brine percolated and replaced calcite formed in the early time, which lead to precipitate dolostones with different occurrences, such as graniphyric, random bedded or lumpy. The diagenetic dolostones with different occurrences resulting from particular formation conditions occurred in different tectonic settings. The dolomitizing fluid has been driven by the thermal convection flow generated by volcanic eruptions. At the same time, the overthrusts of the Wu-Xia growth fault?have speeded up the flow of deep Mg-rich water upwards, and induced the water to quickly?penetrate and horizontally migrate in the strata. Fracture is the major and the most important reservoir space in dolomitic reservoir of the Fengcheng Formation. Fracture and fault plays a decisive role in controlling the formation of dolostone and the distribution of favorable reservoirs. The deliverability of oil and gas is determined by the development and match relations of dissolved pores and fractures to a certain degree.  相似文献   

6.
Cold water coral covered carbonate mounds at the south‐west margin of the Rockall Trough form ridges several kilometres long and up to 380 m high. Piston cores obtained at three mound crests reveal the complex internal structure of the mound build up, with alternating unlithified coral‐dominated intervals and lithified intervals. The most recent lithified interval is covered by corals embedded in a fine‐grained matrix, comprising ca 11 000 years of continuous mound evolution. Before this time 230Th/U dating shows the presence of several hiatuses in mound build‐up. Aragonitic coral material is absent or only present as mouldic porosity in the lithified intervals and coccoliths display widespread overgrowth. Downcore X‐ray fluorescence scanning, computer tomography scan images and petrographic observations indicate different degrees of diagenetic alteration. The upper boundary of the most recent lithified interval shows some erosional features, but petrographic observations indicate that initial lithification of the sediments is not related to this erosive event or to long‐term non‐sedimentation, but to earlier sub‐surface diagenesis. Organic matter oxidation and the subsequent lowering of the saturation state of the carbonate system drives dissolution of the unstable aragonitic coral skeletons. Depending on the openness of the system, this can lead to precipitation of a more stable low‐magnesium carbonate. A model is presented describing the sedimentary and diagenetic processes leading to the formation of lithified intervals.  相似文献   

7.
In the middle Miocene Badenian gypsum basin of the Carpathian Foredeep, west Ukraine, three main zones of gypsum development occur in the peripheral parts of the basin. Zone I consists entirely of stromatolitic gypsum formed in a nearshore zone. Zone II is located more basinward and is characterized by stromatolitic gypsum in the lower part of the section, overlain by a sabre gypsum unit. Zone III occurs in still more basinward areas and is characterized by giant gypsum intergrowths (or secondary nodular gypsum pseudomorphs of these) in the lowermost part, overlain by stromatolitic gypsum, sabre gypsum and then by clastic gypsum units. Correlation between these facies and zones has been achieved using lithological marker beds and surfaces. Of particular importance for correlation is a characteristic marker bed (usually 20–40 cm thick) of cryptocrystalline massive gypsum occurring in zones II and III. The marker was not distinguished in zone I, possibly because this bed is older than the entire gypsum section of that zone. These new results strongly suggest that the deposition of giant gypsum intergrowth facies and stromatolitic gypsum facies was coeval. In some sections of zones I and II, limestone intercalations have been recorded within the upper part of the gypsum sections. Considerable scatter of the δ18O and δ13C values of these limestones indicates variable diagenetic overprints of marine carbonates, but a marine provenance of the limestones is confirmed by microfacies analysis. Some of the limestones are coeval with an intercalation of gypsarenitic, mostly laminated gypsum occurring in the sabre gypsum unit of zones II and III. Badenian gypsum formed in extremely shallow‐water to subaerial environments on broad, very low relief areas of negligible brine depth, which could be affected by rapid transgressions. Stable isotope (δ34S, δ18O) studies of the gypsum demonstrate that the sulphate was of sea‐water origin or was derived from dissolution of Miocene marine evaporites. Investigations of individual inclusions in the gypsum indicate decreased water salinity when compared with modern marine‐derived, calcium sulphate‐saturated water. Groundwater influences are indicated by high calcium sulphate contents of the brines in the evaporite basin. The chemical composition of Badenian waters was thus a mixture of relic sea water (depleted in NaCl), groundwater (enriched in calcium sulphate) and surface run‐off.  相似文献   

8.
生物礁油气藏是油气勘探的一个重要目标,其储集性能的好坏是控制它能否成藏的关键。中二叠世南盘江盆地发育以海绵类为主要骨架的生物礁,其经历了海底潜流、淡水、埋藏、表生等成岩环境,最后抬升出露地表遭受侵蚀。所发生的成岩作用主要有:胶结、溶蚀、白云化、硅化以及压实、压溶作用。在前两种环境中,主要是胶结作用,伴随溶蚀,这一阶段储层孔隙性遭到了一定程度的破坏;浅埋藏阶段的胶结最终填满孔隙;而中-深埋藏环境下的有机流体充注溶蚀以及相应发生的白云岩化作用有效改造了储层的孔隙性,该区处于埋藏条件下的台缘生物礁是有利的油气勘探目标。  相似文献   

9.
10.
通过薄片、阴极发光、背散射和扫描电镜等特征分析,根据白云石的晶体颗粒的形态、大小、晶面、接触关系等特征,兼顾白云石的成因信息,将羌塘盆地昂达尔错地区古油藏中白云石划分为粉-细晶曲面它形结构、粉-细晶曲面它形雾心亮边结构、细-中晶直面半自形-自形结构、细-中晶直面半自形-自形雾心亮边结构、细-中晶直面半自形-自形环带结构、中-粗晶曲面它形结构。成岩结构特征反映了成岩期不同成岩流体作用叠加的多成因模式,包括准同生阶段蒸发咸化海水成因、浅埋藏阶段蒸发咸化海水的回流或下渗扩散交代成因、中-深埋藏阶段埋藏白云石化成因以及深埋藏阶段与构造运动相关的热液交代成因。白云岩中常见的残余粒屑结构和藻纹层结构反映出原始的浅滩相、潮坪相及生屑滩相等高能沉积环境更有利于该区白云岩的形成,原始的沉积微相控制着白云岩化作用的发育和白云岩的空间展布。  相似文献   

11.
川西前陆盆地上三叠统须家河组成岩相研究   总被引:7,自引:1,他引:7  
通过成岩分析,将川西前陆盆地须家河组储层分为压实-压溶成岩相、碳酸岩胶结交代成岩相、粘土矿物(伊利石)胶结交代成岩相、绿泥石环边胶结成岩相、不稳定组分溶蚀成岩相和破碎裂缝成岩相、石英次生加大成岩相、有机质充填成岩相等8种单因素成岩相,并从构造、沉积和成岩作用三类储层要素入手分析其成因及展布,在此基础上划分出须家河组综合成岩相。冲断带发育的压实-破碎-硅质胶结成岩相、近前渊三角洲相砂体中发育强压实-溶蚀-绿泥石衬边胶结成岩相和前隆带三角洲相中发育的中压实-溶蚀-绿泥石衬边胶结相均可形成较好的储层。  相似文献   

12.
余宽宏  金振奎  周勇  李鹏  李娜  官全胜 《沉积学报》2011,29(6):1041-1047
塔东地区寒武纪盆地相以及斜坡相发育泥晶白云岩及泥质泥晶白云岩,具有深水环境标志。通过样品岩石学特征研究、碳、氧同位素分析、有序度分析、锶同位素比值分析以及阴极发光特征分析,提出了塔东地区海盆局限期海水咸化深水准同生白云化机理。海盆局限阶段水体盐度变高,使得斜坡以及海底松软碳酸盐沉积物发生白云石化形成深水环境的泥粉晶白云...  相似文献   

13.
塔里木盆地库车坳陷依奇克里克地区深层致密砂岩储层的非均质性强,成岩成藏过程复杂。根据岩心观察、薄片鉴定、流体包裹体、荧光特征及碳氧同位素等分析,对下侏罗统阿合组致密砂岩的岩石类型、成岩演化及其差异性特征进行了研究。研究表明,阿合组致密砂岩分为强钙质胶结砂岩(C类)、富刚性颗粒岩屑砂岩(A类)、含塑性颗粒岩屑砂岩(D类)、富塑性颗粒岩屑砂岩(B类)4类,经历了两期油气充注,不同类型砂岩的成岩、致密化及成藏过程差异明显。A类砂岩的构造缝及溶蚀孔隙均较发育,渗透率较高、孔隙度分布范围广,代表第二期油气充注的蓝色荧光强。D类砂岩的长石及软岩屑含量稍高,晚期溶蚀作用发育,孔隙度较高、渗透率低,黄色和蓝色荧光共存。A、D两类为有效的致密气藏储层,成岩、成藏过程有差异,D类砂岩早期与晚期油气充注共存,早期油气充注减缓后期压实和碳酸盐胶结作用的发生,有利于晚期酸性溶蚀及油气充注。A类砂岩裂缝发育,对储集性能的影响大,渗透性好,晚期油气充注受早期油气充注的影响小。  相似文献   

14.
The maximum palaeotemperature of oil-bearing sandstones in the UpperTriassic in the eastern Ordos basin has been determined by using many methods including thevitrinite reflectance, fluid inclusion, apatite fission track, illite crystallinity, chlorite polytypeand diagenetic change of authigenic minerals. The thermal gradient in the Late Mesozoic wasabout 2.9-3.0℃/100m. The Upper Triassic was in a mature stage of organic matter andhydrocarbon began to be generated and migrated during this period. The palaeotemperatures ofoil-bearing sandstones were in the range of 88-110℃; those for the generation and migrationof oil ranged from 112 to 122℃. The thickness of the denuded strata overlying the UpperTriassic was 2465-2750m. The present burial depth of oil-bearing sandstones is generally from400 to 1200m. At a depth of ca. 1900m, the temperature may reach 140℃. Below this depth,organic matter was supermature and mainly generated gas.  相似文献   

15.
通过薄片鉴定、扫描电镜观察、包裹体分析、黏土矿物分析、镜质组反射率测试、电子探针和碳氧同位素分析,结合构造演化史和有机质热演化史研究成果,对西湖凹陷古近系平湖组碎屑岩储层的成岩环境和演化模式展开分析,恢复了储层孔隙演化过程并对孔隙度进行定量计算.结果表明:平湖组碎屑岩储层长期处于酸性成岩环境,同时存在酸碱过渡及碱性成岩...  相似文献   

16.
珠江口盆地白云凹陷位于中国南海北部,是目前我国深水油气勘探研究的重要区域.盆地现今大地热流值为24.2~121.0mW/m^2,单井现今地温梯度(Gra)最高可达6.64℃/100m,具"热盆"属性.白云凹陷裂后沉降阶段,特别是白云运动(23.8Ma)发生之后,盆地由断裂控盆转变为断裂、热作用共同控盆,热作用及热动力条件成为控制研究区储层成岩演化过程的重要因素,珠海组地层的镜质体反射率值、砂岩中次生流体包裹体均一温度、热液成因自生矿物等热流背景及岩石学记录为这一观点提供了有力证据.通过铸体薄片显微镜下观察与定量统计、电镜扫描观察、X-射线衍射分析等,发现白云凹陷北部中-低地温梯度(LGR,Gra≤4.5℃/100m)和南部高地温梯度(HGR,Gra>4.5℃/100m)两个地区珠海组砂岩的成岩作用特征、成岩演化过程存在以下差异:(1)中-低地温梯度地区珠海组砂岩的压实作用主要是静岩压实作用;高地温梯度地区珠海组砂岩的原生孔隙受静岩压实作用和热压实作用的共同控制,压实减孔速率高,等孔隙度埋深显著变浅;(2)地层升温速率的增大加快了储层中粘土矿物转化的速率,高地温梯度地区高岭石消失的埋深界限较中-低地温梯度地区浅,I/S(伊利石/蒙皂石混层)有序化进程较中-低地温梯度地区有所加快;(3)中-低地温梯度地区珠海组砂岩成岩演化过程属正常有序演变,高地温梯度地区受构造热事件的影响明显,深部流体参与了高地温梯度地区珠海组砂岩的成岩演化过程,地层孔隙水物质交换过程复杂,成岩演化进程加快,改变了碳酸盐矿物溶解-沉淀热平衡状态,各成岩作用过程活跃并出现一些典型的热液成因自生矿物组合.  相似文献   

17.
王晓晨 《地质与勘探》2018,54(1):193-202
以鄂尔多斯盆地苏77、召51区块山_2~3段储层为例,利用测井资料,岩心资料和铸体(普通)薄片、扫描电镜、X-衍射及压汞等实验,对储层基本特征、成岩作用特征、成岩相类型及平面展布特征进行研究。结果表明:储层岩石类型以石英砂岩和岩屑石英砂岩为主,成分成熟度较高,结构成熟度较低,物性低孔-特低渗。成岩作用以中等-强压实、中等-强胶结及强溶蚀为主,处于中成岩B期。依据成岩作用强度、典型自生矿物和孔隙类型,划分出4种成岩相。优势沉积微相与有利成岩相密切相关,分布于边滩或河道砂坝主砂带上的中等压实-石英弱加大-粒间孔-溶蚀相属最有利成岩相带,中等压实-中等-强伊利石、高岭石胶结-晶间孔-溶蚀孔相次之。  相似文献   

18.
通过剖面观察、岩心描述、分析化验等手段,系统研究了柴达木盆地干柴沟-咸水泉地区中-深层储集体岩石学特征、主要成岩作用类型及特征、储集空间类型及特征、成岩阶段及成岩演化序列,以及成岩作用对储集体性能的影响程度和规律.结果表明:研究区中-深层储集体主要由成分及结构成熟度均为低-中等的各类砂岩和部分泥灰岩组成;以压实作用、胶...  相似文献   

19.
通过岩芯观察、镜下薄片、扫描电镜和X衍射分析等资料,对松辽盆地龙西地区泉四段砂岩的岩石学特征、成岩作用类型、成岩阶段划分和成岩共生序列及孔隙演化特征进行了研究。结果表明:龙西地区泉四段主要为长石质岩屑砂岩,局部为岩屑质长石砂岩;经历的主要成岩作用类型有压实作用、自生石英胶结作用、自生黏土矿物胶结作用、碳酸盐胶结作用、交代和溶蚀作用等;龙西地区泉四段砂岩为中成岩阶段A期,且细分为A1和A2亚期;随着成岩演化,压实和胶结作用使得原生孔隙减小,而溶蚀作用使得储层孔隙结构得到改善;孔隙类型由缩小粒间孔组成变为由缩小粒间孔和溶蚀粒间孔组合组成。  相似文献   

20.
冷家沙三段砂岩成岩序列与孔隙演化   总被引:3,自引:0,他引:3       下载免费PDF全文
笔者以辽河盆地冷家地区冷94井为例,通过铸体薄片、电镜扫描、能谱分析和阴极发光等分析和实验手段,对沙三段砂岩的成岩历史、成岩序列与孔隙演化及发展趋势进行研究。指出成岩阶段可划分为同生期※早成岩阶段早期※早成岩阶段晚期※晚成岩阶段早期。孔隙演化主要在压实作用,粘土矿物的包膜作用,方解石、白云石的胶结作用,长石溶蚀作用,石英的次生加大和微晶石英的沉淀作用等方面进行了研究,阐述并总结了它们互相之间的内在联系。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号