Petrology of lavas from the Puu Oo eruption of Kilauea Volcano: III. The Kupaianaha episode (1986–1992)

 The Puu Oo eruption has been remarkable in the historical record of Kilauea Volcano for its duration (over 13 years), volume (>1 km³) and compositional variation (5.7–10 wt.% MgO). During the summer of 1986, the main vent for lava production moved 3 km down the east rift zone and the eruption style changed from episodic geyser-like fountaining at Puu Oo to virtually continuous, relatively quiescent effusion at the Kupaianaha vent. This paper examines this next chapter in the Puu Oo eruption, episodes 48 and 49, and presents new ICP-MS trace element and Pb-, Sr-, and Nd-isotope data for the entire eruption (1983–1994). Nearly aphyric to weakly olivine-phyric lavas were erupted during episodes 48 and 49. The variation in MgO content of Kupaianaha lavas erupted before 1990 correlates with changes in tilt at the summit of Kilauea, both of which probably were controlled by variations in Kilauea's magma supply rate. These lavas contain euhedral olivines which generally are in equilibrium with whole-rock compositions, although some of the more mafic lavas which erupted during 1990, a period of frequent pauses in the eruption, accumulated 2–4 vol.% olivine. The highest forsterite content of olivines (∼85%) in Kupaianaha lavas indicates that the parental magmas for these lavas had MgO contents of ∼10 wt.%, which equals the highest observed value for lavas during this eruption. The composition of the Puu Oo lavas has progressively changed during the eruption. Since early 1985 (episode 30), when mixing between an evolved rift zone magma and a more mafic summit reservoir-derived magma ended, the normalized (to 10 wt.% MgO) abundances of highly incompatible elements and CaO have systematically decreased with time, whereas ratios of these trace elements and Pb, Sr, and Nd isotopes, and the abundances of Y and Yb, have remained relatively unchanged. These results indicate that the Hawaiian plume source for Puu Oo magmas must be relatively homogeneous on a scale of 10–20 km³ (assuming 5–10% partial melting), and that localized melting within the plume has apparently progressively depleted its incompatible elements and clinopyroxene component as the eruption continued. The rate of variation of highly incompatible elements in Puu Oo lavas is much greater than that observed for Kilauea historical summit lavas (e.g., Ba/Y 0.09 a^–1 vs ∼0.03 a^–1). This rapid change indicates that Puu Oo magmas did not mix thoroughly with magma in the summit reservoir. Thus, except for variable amounts of olivine fractionation, the geochemical variation in these lavas is predominantly controlled by mantle processes. Received: 8 March 1996 / Accepted: 30 April 1996     

The oceanic substratum of Northern Luzon: Evidence from xenoliths within Monglo adakite (the Philippines)

Abstract   A 8.65 Ma adakitic intrusive sheet exposed near Monglo village in the Baguio District of Northern Luzon contains a suite of ultramafic and mafic xenoliths including in order of abundance: spinel dunites showing typical mantle-related textures, mineral and bulk rock compositions, and serpentinites derived from them; amphibole-rich gabbros displaying incompatible element patterns similar to those of flat or moderately enriched back-arc basin basalt magmas; and amphibolites derived from metabasalts and/or metagabbros of identical affinity. A single quartz diorite xenolith carrying a similar subduction-related geochemical signature has also been sampled. One amphibolite xenolith provided a whole-rock K–Ar age of 115.6 Ma (Barremian). We attribute the origin of this suite to the sampling by ascending adakitic magmas of a Lower Cretaceous ophiolitic complex located at a depth within the 30–35 km thick Luzon crust. It could represent an equivalent of the Isabela-Aurora and Pugo-Lepanto ophiolitic massifs exposed in Northern Luzon.     

Differentiation and magma mixing on Kilauea's east rift zone: a further look at the eruptions of 1955 and 1960. Part II. The 1960 lavas

 New and detailed petrographic observations, mineral compositional data, and whole-rock vs glass compositional trends document magma mixing in lavas erupted from Kilauea's lower east rift zone in 1960. Evidence includes the occurrence of heterogeneous phenocryst assemblages, including resorbed and reversely zoned minerals in the lavas inferred to be hybrids. Calculations suggest that this mixing, which is shown to have taken place within magma reservoirs recharged at the end of the 1955 eruption, involved introduction of four different magmas. These magmas originated beneath Kilauea's summit and moved into the rift reservoirs beginning 10 days after the eruption began. We used microprobe analyses of glass to calculate temperatures of liquids erupted in 1955 and 1960. We then used the calculated proportions of stored and recharge components to estimate the temperature of the recharge components, and found those temperatures to be consistent with the temperature of the same magmas as they appeared at Kilauea's summit. Our studies reinforce conclusions reached in previous studies of Kilauea's magmatic plumbing. We infer that magma enters shallow storage beneath Kilauea's summit and also moves laterally into the fluid core of the East rift zone. During this process, if magmas of distinctive chemistry are present, they retain their chemical identity and the amount of cooling is comparable for magma transported either upward or laterally to eruption sites. Intrusions within a few kilometers of the surface cool and crystallize to produce fractionated magma. Magma mixing occurs both within bodies of previously fractionated magma and when new magma intersects a preexisting reservoir. Magma is otherwise prevented from mixing, either by wall-rock septa or by differing thermal and density characteristics of the successive magma batches. Received: July 10, 1995 / Accepted: October 10, 1995     

Distribution and significance of crystalline, perlitic and vesicular textures in the Ordovician Garth Tuff (Wales)

 Diverse spherulitic and granular crystalline fabrics, perlitic textures and fabrics related to the growth and migration of vesicles occur in the Garth Tuff, a largely welded Ordovician ignimbrite. Defining the distribution of such textures helps to constrain the ignimbrite's cooling and degassing history. Suites of spherulitic and perlitic textures closely reflect variation in cooling rates. Seven facies are defined based on the style and intensity of crystallisation: (1) a medium to coarsely crystalline, equigranular facies; (2) an intensely spherulitic facies; (3) a sparsely spherulitic facies; (4) a pectinate facies; (5) a microcrystalline to cryptocrystalline, equigranular facies; (6) a lithophysal facies; and (7) a transitional perlite–pectinate facies. Textural changes from facies 1 to 5 reflect progressively higher cooling rates. Facies 1 occurs in proximal settings in the ignimbrite's core. Facies 2 to 5 successively envelop facies 1, with facies 2 becoming the dominant fabric in the ignimbrite's core in medial settings. Facies 5 is typically developed in the originally glassy perlitic zones at the ignimbrite's welded margins. Crystallisation under hydrous conditions is reflected by second-boiling textures in the sporadically developed lithophysal facies. The seventh facies reflects a subtle interplay between cooling, hydration and crystallisation which locally prevented perlitic fracturing. The distribution of amygdales reflects patterns of volatile migration and entrapment. In the lower levels of the ignimbrite, amygdales occur in irregular concentrations or rare subvertical pipe-like structures. Pipe-like structures attest to fumarolic activity while the ignimbrite was in a rheomorphic state. Amygdales are widespread and evenly distributed in the upper levels of the ignimbrite. However, the top of the welding profile is characterised by a thin, poorly vesiculated, originally vitrophyric horizon that abruptly caps an intense concentration of amygdales. Ductile and brittle fabrics developed during the upward migration of gas. Microscopic drag folds occur around some amygdales. Jigsaw-fit to clast-rotated breccias originated through both late-stage pneumatic fracturing and autobrecciation. Vaporisation of water at the flow base provided a significant source of volatiles in addition to gas released during cooling and crystallisation. Secondary alteration has enhanced or modified some fabrics. Perlitic zones were susceptible to patchy chlorite–sericite–carbonate diagenetic alteration. Diagenesis and metamorphism have contributed to the infilling of vesicles. Received: 22 August 1997 / Accepted: 24 June 1998     

Application of synthetic aperture radar (SAR) imagery to volcano mapping in the humid tropics: a case study in East Java, Indonesia

 Volcanoes in humid tropical environments are frequently cloud covered, typically densely vegetated and rapidly eroded. These factors complicate field and laboratory studies and even the basic identification of potentially active volcanoes. Numerous previous studies have highlighted the potential value of radar remote sensing for volcanology in equatorial regions. Here, cloud- and vegetation-penetrating L_HH-band (λ≈24 cm) synthetic aperture radar (SAR) data from the Japanese Earth Resources Satellite (JERS-1) are used to investigate persistently active volcanoes and prehistoric calderas in East Java, Indonesia. The L_HH-band JERS-1 SAR produces high-spatial-resolution (18 m) imagery with relatively high incidence angle that highlights structures and topographic variations at or greater than the wavelength scale while minimising geometrical distortions such as layover and foreshortening. These images, along with Internet browse data derived from the Canadian RADARSAT mission, provide new evidence relating regional tectonics to volcanism throughout East Java. Volcanic events, such as caldera collapse at the Tengger caldera, appear to have been partly controlled by northwest-aligned faults related to intra-arc sedimentary basins. Similar regional controls appear important at historically active Lamongan volcano, which is encircled by numerous flank maars and cinder cones. A previously undocumented pyroclastic sheet and debris avalanche deposit from the Jambangan caldera complex is also manifested in the synoptic radar images. At the currently active Semeru volcano these data permit identification of recent pyroclastic flow and lahar deposits. Radar data therefore offer a valuable tool for mapping and hazard assessment at late Quaternary volcanoes. The criteria developed in the analysis here could be applied to other regions in the humid tropics. Received: 25 June 1998 / Accepted: 20 January 1999     

Kinematic significance of mingling-rolling structures in lava flows: a case study from Porri Volcano (Salina, Southern Tyrrhenian Sea)

 A basaltic andesite lava flow from Porri Volcano (Salina, Southern Tyrrhenian Sea) is composed of two different magmas. Magma A (51 vol.% of crystals) has a dacitic glass composition, and magma B (18 vol.% of crystals), a basaltic glass composition. Magma B is hosted in A and consists of sub-spherical enclaves and boudin-like, banding and rolling structures (RS). Four types of RS have been recognized: σ–type;δ–type; complex σ-δ–types and transitional structures between sub-spherical enclaves and rolling structures. An analysis of the RS has been performed in order to reconstruct the flow kinematics and the mechanism of flow emplacement. Rolling structures have been selected in three sites located at different distances from the vent. In all sites most RS show the same sense of shear. Kinematic analysis of RS allows the degree of flow non-coaxiality to be determined. The non-coaxiality is expressed by the kinematic vorticity number Wk, a measure of the ratio Sr between pure shear strain rate and simple shear strain rate. The values of Wk calculated from the measured shapes of microscopic RS increase with increasing distance from the vent, from approximately 0.5 to 0.9. Results of the structural analysis reveal that the RS formed during the early–intermediate stage of flow emplacement. They represent originally sub-spherical enclaves deformed at low shear strain. At higher strain, RS deformed to give boudin-like and stretched banding structures. Results of the kinematic analysis suggest that high viscosity lava flows are heterogeneous non-ideal shear flows in which the degree of non-coaxiality increases with the distance from the vent. In the vent area, deformation is intermediate between simple shear and pure shear. Farther from the vent, deformation approaches ideal simple shear. Lateral extension processes occur only in the near-vent zone, where they develop in response to the lateral push of magma extruded from the vent. Lateral shortening processes develop in the distal zone and record the gravity-driven movement of the lava. The lava flow advanced by two main mechanisms, lateral translation and rolling motion. Lateral translation equals rolling near the vent, while rolling motion prevailed in the distal zones. Received: 6 November 1997 / Accepted: 29 November 1997