Fluid evolution during metamorphism of the Otago Schist, New Zealand: (I) Evidence from fluid inclusions

Fluid inclusion salinities from quartz veins in the Otago Schist, New Zealand, range from 1.0 to 7.3 wt% NaCl eq. in the Torlesse terrane, and from 0.4 to 3.1 wt% NaCl eq. in the Caples terrane. Homogenization temperatures from these inclusions range from 124 to 350  °C, with modal values for individual samples ranging from 163 to 229  °C, but coexisting, low-salinity inclusions exhibiting metastable ice melting show a narrower range of T  _h from 86 to 170  °C with modes from 116 to 141  °C. These data have been used in conjunction with chlorite chemistry to suggest trapping conditions of ≈350–400  °C and 4.1–6.0  kbar for inclusions showing metastable melting from lower greenschist facies rocks, with the densities of many other inclusions reset at lower pressures during exhumation of the schist. The fluid inclusion salinities and Br/Cl ratios from veins from the Torlesse terrane are comparable to those of modern sea-water, and this suggests direct derivation of the vein fluid from the original sedimentary pore fluid. Some modification of the fluid may have taken place as a result of interaction with halogen-bearing minerals and dehydration and hydration reactions. The salinity of fluids in the Caples terrane is uniformly lower than that of modern sea-water, and this is interpreted as a result of the dilution of the pore fluid by dehydration of clays and zeolites. The contrast between the two terranes may be a result of the original sedimentary provenance, as the Torlesse terrane consists mainly of quartzofeldspathic sediments, whilst the Caples terrane consists of andesitic volcanogenic sediments and metabasites which are more prone to hydration during diagenesis, and hence may provide more fluid via dehydration at higher grades.     

Synmetamorphic carbon mobility and graphite enrichment in metaturbidites as a precursor to orogenic gold mineralisation, Otago Schist, New Zealand

The Macraes orogenic gold deposit is hosted by a graphitic micaceous schist containing auriferous porphyroblastic sulphides. The host rock resembles zones of unmineralised micaceous graphitic pyritic schists, derived from argillaceous protoliths, that occur locally in background pelitic Otago Schist metasediments. This study was aimed at determining the relationship between these similar rock types, and whether the relationship had implications for ore formation. Argillites in the protolith turbidites of the Otago Schist metamorphic belt contain minor amounts of detrital organic matter (<0.1 wt.%) and diagenetic pyrite (<0.3 wt.% S). The detrital organic carbon was mobilised by metamorphic–hydrothermal fluids and redeposited as graphite in low-grade metaturbidites (pumpellyite–actinolite and greenschist facies). This carbon mobility occurred through >50 million years of evolution of the metamorphic belt, from development of sheared argillite in the Jurassic, to postmetamorphic ductile extension in the Cretaceous. Introduced graphite is structurally controlled and occurs with metamorphic muscovite and chlorite as veins and slicken-sided shears, with some veins having >50% noncarbonate carbon. Graphitic foliation seams in low-grade micaceous schist and metamorphic quartz veins contain equant graphite porphyroblasts up to 2 mm across that are composed of crystallographically homogeneous graphite crystals. Graphite reflectance is anisotropic and ranges from ~1% to ~8% (green light). Texturally similar porphyroblastic pyrite has grown in micaceous schist (up to 10 wt.% S), metamorphic quartz veins and associated muscovite-rich shears. These pyritic schists are weakly enriched in arsenic (up to 60 ppm). The low-grade metamorphic mobility and concentration of graphite in micaceous schists is interpreted to be a precursor process that structurally and geochemically prepared parts of the Otago Schist belt for later (more restricted) gold mineralisation. Economic amounts of gold, and associated arsenic, were subsequently introduced to carbonaceous sulphidic schists in the Macraes gold deposit by a separate metamorphic fluid derived from high-grade metaturbidites. Fluid flow at all stages in these processes occurred at metamorphic rates (mm/year), and fluids were broadly in equilibrium with the rocks through which they were passing.     

Metamorphic discontinuities in orogenic belts: example of the garnet–biotite–albite zone in the Otago Schist, New Zealand

A regional petrographic reconnaissance of psammitic and pelitic rocks in the Otago Schist, New Zealand, has revealed the presence of garnet (“grossalspite” with typical rim composition almandine₄₁, spessartine₂₅, grossular₃₃, pyrope₁) and biotite in 37 new samples, more than doubling the previously known number. A new garnet–biotite–albite zone can now be defined in the greenschist facies Otago Schist that is distinct from the better-known biotite, garnet and oligoclase zones in the along-strike Alpine Schist. The garnet–biotite–albite zone is in part metamorphically discontinuous with adjacent schists and does not support models of simple, continuous, progressive Jurassic regional metamorphism in Otago. The structurally higher (lower grade) boundary of the zone coincides in at least three places with previously mapped regional shear zones. The structurally lower (expected higher grade) boundary of the zone appears to be obliterated by a chlorite zone overprint which can be spatially related to Alpine Schist recrystallisation of ?Cretaceous age. The Otago situation serves as an example of the subtle metamorphic discontinuities that probably pervade many orogenic belts.     

Shallow-level metamorphic fluids in a high uplift rat metamorphic belt; Alpine Schist, New Zealand

Abstract Fluids, some of which are CO₂-rich (up to 40 mol.% CO₂) and some of which are highly saline (up to 18 wt% NaCl equivalent), are trapped as fluid inclusions in quartz-calcite (∼ metallic minerals) veins which cross-cut the pumpellyite-actinolite to amphibolite facies rocks of the Alpine Schist. Fluids were commonly trapped as immiscible liquid-vapour mixes in quartz and calcite showing open-space growth textures. Fluid entrapment occurred at fluid pressures near 500 bars (possibly as low as 150 bars) at temperatures ranging from 260 to 330° C. Saline fluids may have formed by partitioning of dissolved salts into an aqueous phase on segregation of immiscible fluids from a low-density CO₂-rich fluid. Calcite deposited by these fluids has δ¹³C ranging from – 8.4 to – 11.5 and δ¹⁸O from + 4 to + 13. Isotopic data, fluid compositions and mode of occurrence suggest that the fluids are derived from high-grade metamorphic rocks. Fluid interaction with wall-rock has caused biotite crystallization and/or recrystallization in some rocks and retrogression of biotite to chlorite in other rocks.
Fluid penetration through the rock is almost pervasive in many areas where permeability, probably related to Alpine Fault activity, has focussed fluids on a regional scale into fractured rocks. The fluid flow process is made possible by high uplift-rates (in excess of 10 mm/year) bringing hot rocks near to the surface.     

内蒙古头道桥地区蓝闪石片岩和相关变质岩石岩石学特征及其构造意义

内蒙古头道桥地区出露了一套经高压变质形成的岩石组合。本次研究通过岩相学和矿物化学分析,根据矿物组合的不同,识别出蓝片岩、绿片岩两种不同类型的岩石类型。其中,蓝片岩的矿物组合为角闪石（蓝闪石、蓝透闪石）+绿帘石+钠长石+绿泥石+石英+赤铁矿±多硅白云母±方解石±榍石;绿片岩的矿物组合为绿泥石+钠长石+石英±绿帘石±角闪石（阳起石、镁角闪石、蓝透闪石、冻蓝闪石等）±多硅白云母±赤铁矿。确定了蓝片岩的峰期变质级别为绿帘-蓝闪片岩相,峰期变质温度为400~600℃,压力为1.2~1.4 GPa。绿片岩的峰期变质级别为绿帘-角闪岩相。结合前人研究成果,认为蓝片岩和绿片岩的形成与额尔古纳地块和兴安地块的碰撞拼合有关。     

Response of xenotime to prograde metamorphism

Xenotime is a widespread accessory mineral in lower greenschist to upper amphibolite facies metasedimentary rocks from the Palaeoproterozoic Mount Barren Group, southwestern Australia. Xenotime is closely associated with detrital zircon, commonly forming syntaxial outgrowths, in samples of sandstone, micaceous quartzite, slate, phyllite, garnet-bearing semi-pelites, and in kyanite-, garnet-, and staurolite-bearing mica schists. In situ geochronology of xenotime from lower greenschist sandstones has previously yielded multiple U–Pb ages with peaks at ~2.0, ~1.7, and ~1.65 Ga, interpreted to represent the age of detritus, early diagenesis, and a later thermal event, respectively. New U–Pb dating of xenotime in slate yields a major population at ~1.7 Ga with a minor population at ~1.2 Ga, reflecting diagenetic and metamorphic growth, respectively, whereas xenotime in phyllite forms a minor age population at ~1.7 Ga and a main peak at ~1.2 Ga. Mid-greenschist facies semi-pelitic schists (quartz-muscovite-garnet) contain xenotime that formed before 1.8 Ga and at 1.2 Ga, representing detrital and peak metamorphic ages, respectively. Xenotime in samples of amphibolite facies schist (650°C and ~8 kbars) yields U–Pb ages of ~1.2 Ga, coinciding with the time of peak metamorphism. A single analysis of a xenotime core from an amphibolite facies schist gave an age of ~1.8 Ga, consistent with the presence of detrital xenotime. Our results suggest that detrital xenotime may be preserved under greenschist facies conditions, but is largely replaced during upper amphibolite facies conditions. Detrital xenotime is replaced through dissolution–reprecipitation reactions forming compositionally distinct rims during greenschist and amphibolite facies metamorphism at 1.2 Ga. Diagenetic xenotime is present in lower greenschist facies samples, but was not observed in metasedimentary rocks that had experienced temperatures above mid-greenschist facies metamorphism (450°C). The apparent disappearance of detrital and diagenetic xenotime and appearance of metamorphic xenotime during prograde metamorphism indicates that some of the yttrium, heavy rare earth elements, and phosphorus needed for metamorphic xenotime growth are probably derived from the replacement of detrital and diagenetic xenotime.     

Major and trace-element composition and pressure–temperature evolution of rock-buffered fluids in low-grade accretionary-wedge metasediments, Central Alps

The chemical composition of fluid inclusions in quartz crystals from Alpine fissure veins was determined by combination of microthermometry, Raman spectroscopy, and LA-ICPMS analysis. The veins are hosted in carbonate-bearing, organic-rich, low-grade metamorphic metapelites of the Bündnerschiefer of the eastern Central Alps (Switzerland). This strongly deformed tectonic unit is interpreted as a partly subducted accretionary wedge, on the basis of widespread carpholite assemblages that were later overprinted by lower greenschist facies metamorphism. Veins and their host rocks from two locations were studied to compare several indicators for the conditions during metamorphism, including illite crystallinity, graphite thermometry, stability of mineral assemblages, chlorite thermometry, fluid inclusion solute thermometry, and fluid inclusion isochores. Fluid inclusions are aqueous two-phase with 3.7–4.0 wt% equivalent NaCl at Thusis and 1.6–1.7 wt% at Schiers. Reproducible concentrations of Li, Na, K, Rb, Cs, Mg, Ca, Sr, Ba, B, Al, Mn, Cu, Zn, Pb, As, Sb, Cl, Br, and S could be determined for 97 fluid inclusion assemblages. Fluid and mineral geothermometry consistently indicate temperatures of 320 ± 20 °C for the host rocks at Thusis and of 250 ± 30 °C at Schiers. Combining fluid inclusion isochores with independent geothermometers results in pressure estimates of 2.8–3.8 kbar for Thusis, and of 3.3–3.4 kbar for Schiers. Pressure–temperature estimates are confirmed by pseudosection modeling. Fluid compositions and petrological modeling consistently demonstrate that chemical fluid-rock equilibrium was attained during vein formation, indicating that the fluids originated locally by metamorphic dehydration during near-isothermal decompression in a rock-buffered system.     

酸性岩的变质相

在沸石相变质条件下,花岗岩里浊沸石交代了斜长石和石英,在酸性火山岩里产生明矾石、埃洛石或高岭石。经受绿纤石-葡萄石相变质的花岗岩,其中黑云母变为钙铝榴石、帘石、绿纤石和葡萄石集合体,同时斜长石发生绢云母化。绿片岩相内酸性岩的浅色矿物有石英、微斜长石、钠长石和绿帘石,暗色矿物有绿泥石和黑云母。在角闪岩相变质的酸性岩中,开始出现中、基性斜长石,其中暗色矿物黑云母的镁铁比值要大于角闪石的镁铁比值。经受麻粒岩相变质后,紫苏花岗岩的矿物组成没有变化,但有铀、钍和钾的迁出。     

Syn-metamorphic gold mineralisation,Invincible Vein,NW Otago Schist,New Zealand

The Invincible Vein fills a fault zone which strikes northeast and dips steeply southeast in the lower Rees Valley, NW Otago. The vein cuts north striking foliation in lower greenschist facies Otago Schist. Structures associated with the fault zone are both brittle and ductile, and the fault zone has had a complex history of post-mineralisation reactivation. Mineralised vein material filling parts of the fault zone consist of quartz, albite, muscovite, chlorite, calcite, pyrite, arsenopyrite and minor gold. These minerals have been strained and locally recrystallised during ductile deformation. Fluid inclusion homogenisation temperatures (140–175°C) and ice melting temperatures (0 to –1°C) indicate that the mineralising fluid was low salinity, low CO₂ water with a density between 0.88 and 0.93 g/cm₃. Arsenopyrite geothermometry implies a temperature of mineralisation of 370 ± 70°C. Mineralisation pressure lay between 2 and 5 kbar. Mineralisation pressure-temperature conditions and mineralogy are essentially the same as for metamorphism of the host schist. Vein calcite oxygen isotope ratios (+12 to +15 per mil) are similar to host schist values. Carbon isotope ratios of vein calcite (– 3 to –5 per mil) are distinctly different from ratios in host schist (–7 to –10 per mil). Elevated vein Cr contents, and isotopically depleted carbon data, are consistent with some degree of equilibration with metavolcanic rocks. It is inferred that metavolcanic rocks of the underlying Aspiring Terrane were a significant source for mineralising fluid and metals. Invincible mineralisation occurred in the latter stages of metamorphism, and is the earliest recognised gold-bearing vein system in the Otago Schist.     

The nature of fluids during pegmatite development in metamorphic terrains: Evidence from Hamadan complex,Sanandaj-Sirjan metamorphic zone,Iran

In the Sanandaj-Sirjan zone of metamorphic belt of Iran, the area south of Hamadan city comprises of metamorphic rocks, granitic batholith with pegmatites and quartz veins. Alvand batholith is emplaced into metasediments of early Mesozoic age. Fluid inclusions have been studied using microthermometry to evaluate the source of fluids from which quartz veins and pegmatites formed to investigate the possible relation between host rocks of pegmatites and the fluid inclusion types. Host minerals of fluid inclusions in pegmatites are quartz, andalusite and tourmaline. Fluid inclusions can be classified into four types. Type 1 inclusions are high salinity aqueous fluids (NaCl_eq >12 wt%). Type 2 inclusions are low to moderate salinity (NaCl_eq <12 wt%) aqueous fluids. Type 3 and 4 inclusions are carbonic and mixed CO₂-H₂O fluid inclusions. The distribution of fluid inclusions indicate that type 1 and type 2 inclusions are present in the pegmatites and quartz veins respectively in the Alvand batholith. This would imply that aqueous magmatic fluids with no detectable CO₂ were present during the crystallization of these pegmatites and quartz veins. Types 3 and 4 inclusions are common in quartz veins and pegmatites in metamorphic rocks and are more abundant in the hornfelses. The distribution of the different types of fluid inclusions suggests that CO₂ fluids generated during metamorphism and metamorphic fluids might also contribute to the formation of quartz veins and pegmatites in metamorphic terrains.     

Raman spectrum of carbonaceous material: a possible metamorphic grade indicator for low-grade metamorphic rocks

Raman spectral analyses of carbonaceous material (CM) extracted from pelitic samples along two sections traversing the metamorphic belt of Taiwan were carried out in the present study. The results show similar spectral variations of CM with metamorphic grade as those documented in the literature. However, continuous sampling from zeolite facies through prehnite–pumpellyite facies to greenschist facies metamorphic rocks in the present study does reveal some interesting features on the Raman spectra of CM that were not noted before. Both the Raman D (disordered-)/O (ordered-) peak area (i.e. integrated intensity) ratio and the D/O peak width (i.e. full width at half maximum, FWHM) ratio of the CM decrease with progressive metamorphism, but the most prominent change in the D/O peak area ratio occurs in samples of lower greenschist facies metamorphic grade, while the most significant decrease in the D/O peak width ratio occurs in samples near the boundary of prehnite–pumpellyite facies and greenschist facies. This phenomenon is interpreted as a result of the decoupling of the changing rates of in-plane crystallite size and degree of defects of CM with progressive metamorphism. It is postulated that the Raman spectrum of CM can serve as a metamorphic grade indicator to distinguish samples of prehnite–pumpellyite facies metamorphic grade from those of greenschist facies metamorphic grade.     

Origin and deposition of a graphitic schist-hosted metamorphogenic Au-W deposit,Macraes, East Otago,New Zealand

The Macraes gold-tungsten deposit occurs in a low-angle thrust system in biotite grade Otago Schist. Native gold, scheelite, pyrite and arsenopyrite are found in and adjacent to quartz veins and silicified schist of lenticular reef zones, where the thrust system cuts through graphitic pelitic schist. Mineralization is confined to a shear zone, up to 80 m thick, which is closely sub-parallel to the regional schistosity. Chemical alteration is dominated by silicification, with some addition of Cr and depletion of Sr and Ba. Alteration extends only about 5 m from major veins. Oxygen becomes isotopically heavier away from veins due to temperature decrease as hot fluids penetrated into cooler (250°C?) rock. Graphite within the shear zone rocks has reflectance of 6–7% (in oil), similar to graphite in medium-high grade Otago Schist, and is presumed to be metamorphic in origin. This graphite has acted as a reducing agent to cause precipitation of gold where the thrust system, acting as a conduit for metamorphic fluids, intersects the graphitic schist. The metals were derived from the underlying schist pile which may include an over-thrust oceanic assemblage containing metal-enriched horizons.     

塔里木南缘浅变质岩系变质矿物特征及变质条件

在塔里木盆地南缘和田地区的阿其克、皮牙曼、杜瓦、康开依、桑株水库一带断续出露一套浅变质岩地层,主要岩石类型有变质杂砂岩、变质钙质砂岩、细粒片岩及少量千枚岩、变质砾岩、大理岩等.岩石中主要变质矿物为绿泥石、白云母、石英、方解石和少量黑云母、钠长石.本文着重就岩石中片状变质矿物绿泥石、白云母、黑云母的发育特点、化学成分特征、变质矿物组合以及它们的晶体化学成分所反映的变质温、压条件进行了研究,并在此基础上推断出该套变质岩属于由区域低温动力变质作用引起的低绿片岩相变质产物.     

The initiation and development of metamorphic foliation in the Otago Schist, Part 2: evidence from quartz grain-shape data

Shape, size and orientation measurements of quartz grains sampled along two transects that cross zones of increasing metamorphic grade in the Otago Schist, New Zealand, reveal the role of quartz in the progressive development of metamorphic foliation. Sedimentary compaction and diagenesis contributed little to the formation of a shape‐preferred orientation (SPO) within the analysed samples. Metamorphic foliation was initiated at sub‐greenschist facies conditions as part of a composite S1‐bedding structure parallel to the axial planes of tight to isoclinal F1 folds. An important component of this foliation is a pronounced quartz SPO that formed dominantly by the effect of dissolution–precipitation creep on detrital grains in association with F1 strain. With increasing grade, the following trends are evident from the SPO data: (i) a progressive increase in the aspect ratio of grains in sections parallel to lineation, and the development of blade‐shaped grains; (ii) the early development of a strong shape preferred orientation so that blade lengths define the linear aspect of the foliation (lineation) and the intermediate axes of the blades define a partial girdle about the lineation; (iii) a slight thinning and reduction in volume of grains in the one transect; and (iv) an actual increase in thickness and volume in the survivor grains of the second transect. The highest‐grade samples, within the chlorite zone of the greenschist facies, record segregation into quartz‐ and mica‐rich layers. This segregation resulted largely from F2 crenulation and marks a key change in the distribution, deformation and SPO of the quartz grains. The contribution of quartz SPO to defining the foliation lessens as the previously discrete and aligned detrital quartz grains are replaced by aggregates and layers of dynamically recrystallized quartz grains of reduced aspect ratio and reduced alignment. Pressure solution now affects the margins of quartz‐rich layers rather than individual grains. In higher‐grade samples, therefore, the rock structure is characterized increasingly by segregation layering parallel to a foliation defined predominantly by mica SPO.     

The Kamuikotan zone in Hokkaido, Japan: tectonic mixing of high-pressure and low-pressure metamorphic rocks

Abstract. In the Kamuikotan zone, central Hokkaido, Japan, two distinct types of metamorphic rocks are tectonically mixed up, along with a great quantity of ultramafic rocks; one type consists of high-pressure metamorphic rocks, and the other of low-pressure ones. The high-pressure metamorphic rocks are divided into two categories. (1) Prograde greenschist to glaucophaneschist facies rocks derived from mudstone, sandstone, limestone, a variety of basic rocks such as pillow and massive lavas, hyaloclastite and tuff, and radiolarian (Valanginian to Hauterivian) chert, among which the basic rocks and the chert, and occasionally the sandstone, occur as incoherent blocks (or inclusions) enveloped by mudstone. (2) Retrograde amphibolites with minor metachert and glaucophane-calcite rock, which are tectonic (or exotic) blocks enclosed within prograde mudstone or serpentinite, or separated from these prograde rocks by faults. The K-Ar ages of the prograde metamorphic rocks (72, 107 and 116 Ma on phengitic muscovites) are younger than those of the retrograde rocks (109, 132, 135 and 145 Ma on muscovites, and 120 Ma on hornblende). The low-pressure metamorphic rocks consist of the mafic members of an ophiolite sequence with a capping of radiolarian (Tithonian) chert with the metamorphic grade ranging from the zeolite facies, through the greenschist (partly, actinolite-calcic plagioclase) facies to the amphibolite (partly, hornblende-granulite) facies. The low-pressure metamorphism has a number of similarities with that described for'ocean-floor'metamorphism. The tectonic evolution of such a mixed-up zone is discussed in relation to Mesozoic plate motion.     

A Petrographic and Mineralogical Study of Volcanic Rocks from the Mayaxueshan Area, North Qilian Fold Belt, NW China

The Ordovician volcanic rocks in the Mayaxueshan area have been pervasively altered or metamorphosed and contain abundant secondary minerals such as albite, chlorite, epidote, prehnite, pumpellyite, actinolite, titanite, quartz, and/or calcite. They were denoted as spilites or spilitic rocks in terms of their petrographic features and mineral assemblages. The metamorphic grades of the volcanic rocks are equivalent to that of the intercalated metaclastic rocks. This indicates that both the spilitic volcanic rocks and metaclastic rocks in the Mayaxueshan area have formed as a result of Caledonian regional metamorphism. We suggest that the previously denoted spilitic rocks or altered volcanic rocks should be re-denoted as metabasalts or metabasaltic rocks. The metamorphic grade of the volcanic rocks increases with their age: prehnite-pumpellyite facies for the upper part of the Middle Ordovician volcanic rocks, prehnite-pumpeilyite to lower greenschist facies for the lower part of the Middle Ordovician vol     

Incipient metamorphism and deformation in the Variscides of SW Dyfed, Wales: first steps towards isotopic equilibrium

Incipient metamorphism accompanying thrusting, folding and cleavage development has been investigated in a varied sequence of Palaeozoic sediments near the Variscan front in SW Dyfed, Wales. The aim was to evaluate a critical stage in the progression from heterogeneous sediment, whose detrital phases are neither in equilibrium with one another, nor with pore fluids, through indurated sedimentary rock to metamorphic rock comprising newly formed crystals that equilibrated with one another as they grew. Quartz veins are widely developed in the area, especially in the more psammitic lithologies, while finer grained rocks became cleaved during tectonic deformation. Mineralogical constraints and fluid inclusion measurements suggest maximum temperatures around 200-310d? C (slightly higher in the Marloes-Musselwick Thrust Sheet than in other parts of the structural succession) at depths of the order of 6-13 km. Quartz veins yield distinctly heavier oxygen isotopic compositions than detrital quartz grains in the adjacent wall rocks, although care must be taken in interpreting the data because slivers of detrital grains may become incorporated into veins, while matrix detrital grains may incorporate veinlets or rims of newly formed quartz. It is concluded that vein quartz grew in isotopic equilibrium with a fluid phase whose isotopic composition was primarily controlled by exchange with phyllosilicates, not detrital quartz grains. Vein and matrix quartzes from the Marloes-Musselwick Thrust Sheet are distinctly lighter (δ¹⁸O_veins=+14 to +18% and δ¹⁸O_matrix=+11 to +14%) than those from other thrust sheets (δ¹⁸O =+17 to +20% and +14 to +17%, respectively). We conclude that vein quartz and phyllosilicate grains in cleavage domains probably attained equilibrium with a locally buffered pore fluid at the peak of metamorphism, but many relict grains of different chemical and isotopic composition remained elsewhere in the rock. Local fluid migration along veins and through cleavage lamellae facilitated the attainment of equilibrium, but there is little evidence for large-scale infiltration of externally derived fluids. With further metamorphism the quartz in these rocks would attain an isotopic composition intermediate between that of the heavy vein material and light detritus which coexist here.     

Gradients in fluid composition across metacarbonate layers of the Wepawaug Schist, Connecticut, USA

Metamorphic index mineral zones, pressure-temperature (P-T) conditions, and CO₂-H₂O fluid compositions were determined for metacarbonate layers within the Wepawaug Schist, Connecticut, USA. Peak metamorphic conditions were attained in the Acadian orogeny and increase from ~420 °C and ~6.5 kb in the low-grade greenschist facies to ~610 °C and ~9.5 kb in the amphibolite facies. The index minerals oligoclase, biotite, calcic amphibole, and diopside formed with progressive increases in metamorphic intensity. In the upper greenschist facies and in the amphibolite facies, prograde reaction progress is greatest along the margins of metacarbonate layers in contact with surrounding schists, or in reaction selvages bordering syn-metamorphic quartz veins. New index minerals typically appear first in these more highly reacted contact and selvage zones. It has been postulated that this spatial zonation of mineral assemblages resulted from infiltration, largely by diffusion, of water-rich fluids across lithologic contacts or away from fluid conduits like fractures. In this model, the infiltrating fluids drove prograde CO₂ loss and were derived from surrounding dehydrating schists or sources external to the metasedimentary sequence. The model predicts that significant gradients in the mole fraction of CO₂ (X_CO2 X_{CO_2 } ) should have been present during metamorphism, but new estimates of fluid composition indicate that differences in X_CO2 X_{CO_2 } preserved across layers or vein selvages were very small, ~0.02 or less. However, analytical solutions to the two-dimensional advection-dispersion-reaction equation show that only small fluid composition gradients across layers or selvages are needed to drive prograde CO₂ loss by diffusion and mechanical dispersion. These gradients, although typically too small to be measured by field-based techniques, would still be large enough to dominate the effects of fluid flow and reaction along regional T and P gradients. Larger gradients in fluid composition may have existed across some layers during metamorphism, but large gradients favor rapid reaction and would, therefore, seldom be preserved in the rock record. Most of the H₂O needed to drive prograde CO₂ loss probably came from regional dehydration of surrounding metapelitic schists, although H₂O-rich diopside zone conditions may have also required an external fluid component derived from syn-metamorphic intrusions or the metavolcanic rocks that structurally underlie the Wepawaug Schist.     

Metamorphic evolution of the southern part of the Hidaka belt, Hokkaido, Japan

Abstract The Hidaka metamorphic terrane in the Meguro-Shoya area, Hokkaido, Japan is divided into four progressive metamorphic zones: A—biotite zone; B—cordierite zone; C—cordierite–K-feldspar zone; and, D—sillimanite–K-feldspar zone of the andalusite–sillimanite facies series type of metamorphism. The metamorphic grade ranges from the higher temperature part of the greenschist facies (zone A) through the amphibolite facies (zones B and C) to the lower temperature part of the granulite facies (zone D). The zone boundaries intersect the bedding planes at high angles. P–T conditions estimated are 450–550°C and 2 kbar for zone A, 550–600°C and 2–2.5 kbar for zone B, 600–650°C and 2.5–3 kbar for zone C and 650–750°C and 3–4 kbar for zone D. The metapelites of zone D were partially melted.
At the later stage of the regional metamorphism which is early Oligocene to early Miocene in age, cordierite tonalite and biotite tonalite intrusives associated with segments of the highest grade rocks (zone D) were emplaced into the lower temperature part of the regional metamorphic rocks, giving rise to a contact metamorphic aureole. The thermally metamorphosed terrain (zone C') belongs to the amphibolite facies and its P–T conditions are estimated to have been 550–700°C and 2 kbar.
The P–T–t paths of the Hidaka metamorphism show a thickening–heating–uplifting process. The metamorphism is inferred to have taken place beneath an active island arc accompanied by partial melting of the crust.     

Geochemistry of late metamorphic hydrothermal alteration and graphitisation of host rock, Macraes gold mine, Otago Schist, New Zealand

The Macraes gold deposit in the Otago Schist, New Zealand, formed during late metamorphic fluid flow through a lower greenschist facies shear zone. Mineralisation occurred near to the brittle-ductile transition at about 300 °C. Large volumes of host rock in a shear zone up to 120 m thick have been hydrothermally altered by this fluid activity. Most alteration is not structurally controlled apart from proximity to the shear zone. Ductile and brittle microshears traverse the most mineralised rocks and some structural control of fluid flow occurred as well. Fluid flow was slow, similar to that in metamorphic rocks (mm/year) and diffusion through interconnected fluid was a significant chemical process. Localised extensional hydrofractures (m scale) are filled with mineralised quartz. Most alteration of the host rocks was isochemical with respect to the lithophile elements, and mineralised rocks have been variably enriched in As, Au, Sb, W, Mo and Bi, but not Co or Cd. Addition of sulphur has occurred to both host rocks and mineralised rocks, up to 1 wt.% above a background of 0.1 wt.%. Host rock sulphur is mainly pyritic and is not structurally controlled. Mineralised rocks have pyrite and arsenopyrite along microshears. Pyrite, chalcopyrite, sphalerite and galena have formed from sulphidation of silicates with no addition of metals. Graphite has been added to mineralised rocks along microshears, up to 3 wt.% locally, above a background of 0.1 wt.% noncarbonate carbon. Graphite deposition may have occurred as a result of mixing of two fluids, water+methane, and water+carbon dioxide. Graphitisation and sulphidation reactions released low δD water, which accumulated in the slow-moving mineralising fluid. Distinction between this low δD reaction water and meteoric water incursion is difficult.