Quaternary faulting in the Upper Rhine Graben revealed by high-resolution multi-channel reflection seismic

A high-resolution multichannel seismic reflection river profiling campaign was completed in July 2002 in the southern Upper Rhine graben (URG), along the River Rhine. Preliminary results show apparent Quaternary vertical slip rates, on intra-graben faults that are relatively slow, of the order of a few thousandths to a few hundredths of mm/yr. Moreover, kinematical data from the Ludwigshafen area show decreasing vertical slip rates since the Middle Pleistocene and/or a migration of tectonic activity. While still preliminary, these data show inhomogeneous and relatively slow tectonic activity in the URG that could probably not alone have shaped the Quaternary graben morphology. To cite this article: G. Bertrand et al., C. R. Geoscience 338 (2006).     

Pleistocene tectonics inferred from fluvial terraces of the northern Upper Rhine Graben, Germany

This study of fluvial terraces of the River Rhine and tributaries aims to search for indications of Pleistocene tectonic activity. The study area includes the northern Upper Rhine Graben (URG), the Mainz Basin and the adjacent Rhenish Massif with the Middle Rhine Valley. High rates of Quaternary surface processes, large amount of human modifications, relatively slow tectonic deformation and presently low intra-plate seismic activity characterize this area. Therefore, the records of relatively slow tectonic deformation are less well preserved and thus difficult to detect. This study uses the relative position of fluvial terraces to determine the more local effects of fault movements on the terraces and to evaluate their displacement rates and patterns. The research is based on a review of previous terrace studies and new terrace mapping from the eastern Mainz Basin and the bordering URG using topographic map interpretations and field observations. This newly mapped sequence of terrace surfaces can be correlated to other terraces in the vicinity on the basis of relative height levels. Terrace correlation between the western Mainz Basin and Middle Rhine Valley relies on a single chronostratigraphic unit (Mosbach sands) and additional relative height correlations. This is the first study to present a continuous correlation of terraces from the western margin of the URG to the Rhenish Massif and enables the study of the transition from the subsiding graben to the uplifted Rhenish Massif. By means of a longitudinal profile, which ranges from the URG to the Rhenish Massif, the influence of individual fault movements on the terrace levels and the large-scale regional uplift is demonstrated. It is evident from the profile that the uplift of Early to Middle Pleistocene terraces increases northwards, towards the Rhenish Massif. The uplift was diachronic, with a significant pulse occurring first in the northern URG (Lower Pleistocene) and later in the Rhenish Massif (Middle Pleistocene). The largest vertical displacements are recorded for the boundary fault separating the Mainz Basin and the Rhenish Massif (Hunsrück–Taunus Boundary Fault) and for faults bounding the northeastern Mainz Basin. The motions and displacement rates calculated for individual faults indicate deformation rates in the order of 0.01–0.08 mm/year. At this stage, the calculation of displacement rates depends mostly on a single dated stratigraphic unit. Additional dating of terrace deposits is urgently needed to better constrain the temporal development of the terrace sequence and the impact of tectonic movements.     

Fluvial aggradation phases in the Upper Rhine Graben—new insights by quartz OSL dating

The Upper Rhine Graben (URG) is characterized by a thickness of up to 500 m of unconsolidated Quaternary sediments, providing excellent records of the Rhine river system and its responses to tectonic and climatic changes. The most complete Quaternary sequence of fluvial and limnic-fluvial deposits is found in the Heidelberg Basin, due to its long-term subsidence since the mid-Eocene. The aim of this study is to provide a chronological framework using optically stimulated luminescence (OSL) dating of aeolian and fluvial sands derived from the upper 33 m of a sediment core, which was drilled into the Heidelberg Basin infill close to the village of Viernheim, Germany. The OSL ages demonstrate that the dated fluvial sediments were deposited during the last glacial period (Weichselian) and that there were at least three aggradation periods during this episode. The coversands that cap the sequence were emplaced during the early Holocene.     

Paleogeography of the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB) from Eocene to Pliocene

Twenty paleogeographic maps are presented for Middle Eocene (Lutetian) to Late Pliocene times according to the stratigraphical data given in the companion paper by Berger et al. this volume. Following a first lacustrine-continental sedimentation during the Middle Eocene, two and locally three Rupelian transgressive events were identified with the first corresponding with the Early Rupelian Middle Pechelbronn beds and the second and third with the Late Rupelian Serie Grise (Fischschiefer and equivalents). During the Early Rupelian (Middle Pechelbronn beds), a connection between North Sea and URG is clearly demonstrated, but a general connection between North Sea, URG and Paratethys, via the Alpine sea, is proposed, but not proved, during the late Rupelian. Whereas in the southern URG, a major hiatus spans Early Aquitanian to Pliocene times, Early and Middle Miocene marine, brackish and freshwater facies occur in the northern URG and in the Molasse Basin (OMM, OSM); however, no marine connections between these basins could be demonstrated during this time. After the deposition of the molasse series, a very complex drainage pattern developed during the Late Miocene and Pliocene, with a clear connection to the Bresse Graben during the Piacenzian (Sundgau gravels). During the Late Miocene, Pliocene and Quaternary sedimentation persisted in the northern URG with hardly any interruptions. The present drainage pattern of the Rhine river (from Alpine area to the lower Rhine Embayment) was not established before the Early Pleistocene.     

Low-temperature thermochronology of the flanks of the southern Upper Rhine Graben

The Upper Rhine Graben (URG) is the most perceptible part of the European Cenozoic Rift System. Uplifted Variscan basement of the Black Forest and the Vosges forms the flanks of the southern part of the graben. Apatite and zircon fission-track (FT) analyses indicate a complex low-temperature thermal history of the basement that was deciphered by inverse modelling of FT parameters. The models were tested against the observed data and independent geological constraints. The zircon FT ages of 28 outcrop samples taken along an E–W trending transect across the Black Forest and the Vosges range from 136 to 312 Ma, the apatite FT ages from 20 to 83 Ma. The frequency distributions of confined track lengths are broad and often bimodal in shape indicating a complex thermal history. Cooling below 120°C in the Early Cretaceous to Palaeogene was followed by a discrete heating episode during the late Eocene and subsequent cooling to surface temperature. The modelled time–temperature (t–T) paths point to a total denudation of the flanks of URG in the range of 1.0–1.7 km for a paleogeothermal gradient of 60°C/km, and 1.3–2.2 km for a paleogeothermal gradient of 45°C/km since the late Eocene.     

The velocity structure of the Cariaco sedimentary basin,northeastern Venezuela,from refraction seismic data and possible relationship to earthquake hazard

The main damage from the July 9, 1997, Cariaco earthquake (Ms=6.8) was concentrated in the town of Cariaco and surrounding villages, which are located in the western part of the Cariaco sedimentary basin, close to the Gulf of Cariaco. Casanay, located at the eastern end of the sedimentary basin, suffered considerably less damage. The El Pilar fault, a right-lateral strike-slip fault that generated the earthquake, runs parallel to the southern border of the valley and crosses both towns. The determination of the velocity structure of the basin is the main objective of this study. Seismic refraction data were recorded along three lines, one of them along-strike and two perpendicular to the valley axis in the northern and southern bedrocks. Beneath Cariaco, approximately 1 km thick Quaternary sediments with seismic velocities of 1.9–2.1 km/s and bedrock velocities of more than 4 km/s were observed. The thickness of the Quaternary sediments varies within the basin, and Pleistocene sediments outcrop beneath Casanay. The increased thickness of the unconsolidated, water-saturated Quaternary sediments, together with the difference in the quality of buildings prior to the earthquake, probably is responsible for the damage pattern of the Cariaco earthquake.     

Isotopic and hydrochemical studies of groundwater flow and salinity in the Southern Upper Rhine Graben

In order to determine the origin and the propagation mechanisms of highly concentrated chloride brines within the Quaternary aquifer system in the southern part of the Upper Rhine Graben, a combined isotope (H, O, C) and hydrochemical analysis was carried out. Groundwater recharge in this area is a complex system, consisting of local precipitation, river bank filtration, lateral flow from the Graben borders and, to a minor extent, an old Pleistocene component. In some areas, groundwater consists of up to 90% of recent bank filtrate, reaching depths down to at least 100 m. The isotopic and hydrochemical results show, that the elevated chloride concentrations in the Quaternary aquifer mainly result from leaky settling basins charged by the French potash mines until the mid 1970s. Input of natural brines coming from tertiary salt diapirs is of only minor importance. While infiltrating, the anthropogenic brines were strongly diluted by local river bank filtrate of the Rhine. Nevertheless, maximum chloride concentrations nowadays still reach some 10,000 mg/l at the base of the aquifer at a depth of more than 100 m below surface. The main volume of the brines is stored in the less permeable lower part of the quaternary sediments (Breisgau-Formation) whereas only a minor part is transported northwards with the rapid convective groundwater flow. Brines undergoing only dilution preserve their hydrochemical characteristics (NaCl-type). In contrast, brines recirculated from the Breisgau-Formation show a northwards increasing alteration through ion exchange processes. Potassium and sodium may be fixed in the fine grained aquifer material while calcium is set free into the groundwater. After a flow distance of about 12 km, complex hydraulic interactions between groundwater and surface waters lead to the rise of strongly diluted and hydrochemically altered brines with chloride contents up to maximum 700 mg/l. The presented case study is an example for a detailed analysis of a multi-component groundwater mixing system using combined isotope and hydrochemical methods. Furthermore, cation exchange is shown as a major process affecting the hydrochemical evolution of the young groundwater in the southern Upper Rhine Graben which is locally strongly polluted by chloride as a consequence of former potash mining.     

Graben width controlling syn-rift sedimentation: the Palaeogene southern Upper Rhine Graben as an example

Eocene to Early Oligocene syn-rift deposits of the southern Upper Rhine Graben (URG) accumulated in restricted environments. Sedimentation was controlled by local clastic supply from the graben flanks, as well as by strong intra-basinal variations in accommodation space due to differential tectonic subsidence, that in turn led to pronounced lateral variations in depositional environment. Three large-scale cycles of intensified evaporite sedimentation were interrupted by temporary changes towards brackish or freshwater conditions. They form three major base level cycles that can be traced throughout the basin, each of them representing a stratigraphic sub-unit. A relatively constant amount of horizontal extension (ΔL) in the range of 4–5 km has been estimated for the URG from numerous cross-sections. The width of the rift (L _f ), however, varies between 35 and more than 60 km, resulting in a variable crustal stretching factor between the bounding masterfaults. Apart from block tilting, tectonic subsidence was, therefore, largely controlled by changes in the initial rift width (L ₀). The along-strike variations of the graben width are responsible for the development of a deep, trough-like evaporite basin (Potash Basin) in the narrowest part of the southern URG, adjacent to shallow areas in the wider parts of the rift such as the Colmar Swell in the north and the Rhine Bresse Transfer Zone that delimits the URG to the south. Under a constant amount of extension, the along-strike variation in rift width is the principal factor controlling depo-centre development in extensional basins.     

Permeability distribution in the Quaternary of the Upper Rhine glacio-fluvial aquifer

An extraordinarily large and geographically extensive 3D dataset has allowed us to relate permeability to detailed geological features. Permeability data derived from several thousand pumptests in Quaternary sediments (thickness < 120 m) of the Upper Rhine valley vary from K = 4.5 × 10⁻⁷ m s⁻¹ to K = 2.7 × 10⁻¹ m s⁻¹. The geometric mean of the data is K = 2.25 × 10⁻³ m s⁻¹. The permeability distribution maps for four different stratigraphic levels show that the highest values are found in sections beneath recent and historic fluvial systems. Fossil fans of small rivers from the Black Forest can be identified in the Rhine valley on the basis of the permeability pattern. The average hydraulic conductivity decreases S–N along the flow direction which corresponds to a decrease in grain-size of the fluvial sediments.     

Simultaneous normal faulting and extensional flexuring during rifting: an example from the southernmost Upper Rhine Graben

The southern end of the Upper Rhine Graben (URG) is formed by a major continental transfer zone, which was localised by the reactivation of ENE-oriented basement faults of Late Palaeozoic origin. A combination of subcrop data (derived from exploration wells and reflection seismic lines) and palaeostress analysis provided new constraints on the timing and kinematics of interacting basement faults. Rifting in the southern URG began in the Upper Priabonian under regional WNW–ESE-directed extension, oriented roughly perpendicular to the graben axis. In the study area, this led to the formation of NNE-trending half-grabens. Simultaneously, ENE-trending basement faults, situated in the area of the future Rhine-Bresse Transfer Zone (RBTZ), were reactivated in a sinistrally transtensive mode. In the sedimentary cover the strike-slip component was accommodated by the development of en-échelon aligned extensional flexures. Flexuring and interference between the differently oriented basement faults imposed additional, but locally confined extension in the sedimentary cover, which deviated by as much as 90° from the regional WNW–ESE extension. The interference of regional and local stresses led to a regime approaching radial extension at the intersection between the URG and RBTZ.     

Eocene-Pliocene time scale and stratigraphy of the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB)

We present a general stratigraphic synthesis for the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB) from Eocene to Pliocene times. The stratigraphic data were compiled both from literature and from research carried out by the authors during the past 6 years ; an index of the stratigraphically most important localitites is provided. We distinguish 14 geographical areas from the Helvetic domain in the South to the Hanau Basin in the North. For each geographical area, we give a synthesis of the biostratigraphy, lithofacies, and chronostratigraphic ranges. The relationships between this stratigraphic record and the global sea-level changes are generally disturbed by the geodynamic (e.g., subsidence) evolution of the basins. However, global sea-level changes probably affected the dynamic of transgression–regression in the URG (e.g., Middle Pechelbronn Beds and Serie Grise corresponding with sea-level rise between Ru1/Ru2 and Ru2/Ru3 sequences, respectively) as well as in the Molasse basin (regression of the UMM corresponding with the sea-level drop at the Ch1 sequence). The URGENT-project (Upper Rhine Graben evolution and neotectonics) provided an unique opportunity to carry out and present this synthesis. Discussions with scientists addressing sedimentology, tectonics, geophysics and geochemistry permitted the comparison of the sedimentary history and stratigraphy of the basin with processes controlling its geodynamic evolution. Data presented here back up the palaeogeographic reconstructions presented in a companion paper by the same authors (see Berger et al. in Int J Earth Sci 2005).     

Quaternary stratigraphy of the Koratallaiyar-Cooum basin,Chennai

In this paper we present Quaternary stratigraphy of the area around Chennai based on archaeological findings on the ferricrete surface, geomorphological observations supplemented by radiocarbon dating. The coastal landscape around Chennai, Tamil Nadu, has preserved ferruginised boulder gravel deposits, ferricretes and fluvial deposits of varying thickness. The area studied is approximately 150 km east to west and 180 km north to south with a broad continental shelf towards the seaward. Several rivers enter the Bay of Bengal along its shores like the Koratallaiyar, Cooum and the Adyar. Precambrian charnockite and Upper Gondwana sandstone and shale bedrock rim the shelf margin. For the most part, the Upper Pleistocene-Holocene fluvial sediments overlie an erosion surface that has cut into older Pleistocene sediments and ferricrete surface. Incised valleys that cut into this erosion surface are up to 5–6 km wide and have a relief of at least 30 m. The largest valley is that cut by the Koratallaiyar River. Holocene sediments deposited in the incised valleys include fluvial gravels, early transgressive channel sands and floodplain silts. Older Pleistocene sediments are deposited before and during the 120-ka high stand (Marine isotope stage 5). They consist of ferricretes and ferricrete gravel formed in nearshore humid environments. Muddy and sandy clastic sediments dated to the ca. 5 ka highstand suggest that the climate was semi arid at this time with less fluvial transport. The coarsening up sequence indicates deposition by high intensity channel processes. Pedogenic mottled, clayey silt unit represents an important tectonic event when the channel was temporarily drained and sediment were sub aerially exposed. Uplift of the region has caused the local rivers to incise into the landscape, forming degradation terraces.     

Stratigraphic and lithologic characteristics of Pleistocene fluvial deposits in the Danube and Sava riparian area near Belgrade (Serbia)

The Quaternary sediments in the Danube and Sava riparian area near Belgrade have a considerable thickness. Several categories of deposits (fluvial-lacustrine, fluvial and aeolian) of Pliocene and Quaternary age have been identified. Their thickness, granulometric composition and paleontological features change depending on the distance from the recent Danube and Sava riverbeds. The Pleistocene fluvial deposits are underlain by sediments of the Late Miocene (Sarmatian and Pannonian) or the Plio-Pleistocene age, and are overlain by fluvial-palustrine deposits of the Pleistocene age and recent alluvial deposits. Pleistocene fluvial deposits that form a major part of the Quaternary sediments, have a great significance, since they are proved to be excellent collectors of ground water. Although these deposits are at lower altitudes in the area of Srem, they could be correlated with the high Danube and Morava terraces in Serbia and Drava in Croatia on the basis of their lithologic and paleontological features.     

Correlation of the Quaternary terrace sequence in the Lower Rhine valley and northern Alpine foothills of central Europe

Thirteen glacial terraces are known from the western part of the northern Alpine foothills between the Lech and Iller Rivers. In the Lower Rhine region of West Germany, a similar number of terraces are capped by interglacial floodloams and soils. Whereas the environment during individual interglaciations did not differ substantially, the glaciations were progressively more severe. The Main Terrace system of the Rhine may be an exception. The duration of the Quaternary, starting at the base of Praetiglian, is estimated at approximately 2 million yr by paleomagnetic dating. The major cold-warm climatic cycles of the earliest Pleistocene lasted approximately 100,000 yr, the same as those of the Brunhes Chron. The intervening Main Terrace system has not yet been climatically subdivided. Correlation with the Netherlands is possible because of an abundance of paleobotanic and paleomagnetic evidence. In the Alpine foothills, stratigraphically useful indicators of warm climates are missing, but analogies in terrace development permit comparison with the Lower Rhine and Danube. The terrace sequence in the Alpine foothills is incomplete, as are those along most of the other rivers in Europe. Some of the older terraces may have been eroded.     

Insight into the structure of the Upper Rhine Graben and its basement from a new compilation of Bouguer Gravity

A compilation of gravity data from the Upper Rhine Graben (URG) is presented that includes all the main data sources from its German and French parts. This data is used to show that the URG consists of, at least, two arc-shaped and asymmetric rift units that tectonically are the basic building blocks of the graben. In this sense the URG does not differ from other continental rifts, such as the African rifts. This division should replace the now classical geomorphologic division of the URG into three segments, based on their different trends. Moreover, the gravity suggests that the faults in the central and southern segments are continuous and have the same trend, appearing to respond as a single kinematic unit. Changes in the gravity field in the graben are shown to reflect not only the structure of the graben, but also the highly variable composition of the basement. In this respect, the URG is quite different from some other Tertiary continental rifts, where possible changes in the composition of the basement are mostly masked in the gravity field by the effect of the overlying low-density sediments. This characteristic is used to study the extent of some of the main basement units that underlie the graben.     

The Roermond earthquake of 13 April 1992, the Netherlands: geological aspects

The epicentre of the Roermond earthquake is located near the western boundary fault of the Roer valley trough, one of the deepest and the most active in the Quaternary part of the Lower Rhine graben. The Late Pleistocene and Holocene activity of the trough is manifested by offsets of the main (Mindel) and the lower (Riss and Late Pleistocene) terraces along the boundary faults.
Surface fractures have been observed in an area of more than 50 km²: 2.5–3.5 km to the north of the town of Roermond, at 0.8 km to the south of the village of Herkenbosch and in the southeastern part of the village of Montfort. Three types of ruptures were differentiated: scarps up to 50 cm high along open fractures near the Maas River; open fractures (continued by scarps in some places) and open fractures with a liquefaction of the Quaternary alluvium sands. The last type is predominant. The location of the ruptures depends on the landscape and water-table of the region. While they could be produced solely by hydraulic shock during the earthquake (increased by the wet spring season), the majority of the ruptures strike N50°W ± 10°, i.e. parallel to the main trough faults, or N55°E ± 10°, along 'neotectonic lines', parallel to the Maas valley and deduced from space imagery. Thus, the ruptures could be the secondary surficial effect of the earthquake, linked indirectly with the active tectonics of the region.     

冲绳海槽西部陆坡第四纪沉积地层划分

冲绳海槽西部陆坡是认识深海斜坡沉积的重要区域。通过对高分辨率地震资料的精细解释,结合已有的研究成果,在冲绳海槽西部陆坡海底以下识别出4个主要的地震层序界面,相应地划分出四个主要地震层序,各层序分别对应全新世沉积层(Q4)、晚更新世沉积层(Q3)、中更新世沉积层(Q2)和早更新世沉积层(Q1)。从陆坡上部往下由斜交前积反射结构过渡到杂乱的反射结构,在地震剖面上可识别出杂乱的丘形反射单元,是滑塌体和重力流沉积的典型地震反射特征,反映出一种高能的、极不稳定的沉积环境。海槽轴部以平行-亚平行的地震反射特征为主,显示了稳定的深海-半深海的沉积环境。地震反射结构的多样性反映了冲绳海槽西部陆坡沉积环境的复杂性和沉机作用类型的多样性,沉积地层结构是多种因素共同作用的结果。东海陆架和冲绳海槽发育相同的第四纪地层垂向序列,同时冲绳海槽西部陆坡与东海陆架第四纪沉积层在层序界面、沉积层厚度、变形程度和产状等方面存在着差异,单靠地震资料来进行两个地区的地层对比存在着不确定性。     

Mid-Pleistocene ice drainage pattern in the Norwegian Channel imaged by 3D seismic

Several investigations have shown that a huge Late Weichselian ice stream flowed along the Norwegian Channel, and deposited thick debris flow deposits at the North Sea Fan. The development of the channel is probably mainly a result of several cycles of ice stream activity during the Quaternary. A merged 3D seismic image shows a lineated relief pattern interpreted as a uniquely well-preserved footprint of a moving ice sheet. This deep Quaternary horizon corresponds to a slightly irregular reflector on top of a parallel-layered seismic sequence. Seismic tie to the Troll core 8903 south of the study area shows that the sequence comprises Early Middle Pleistocene marine sediments. The pattern of lineations, the seismic stratigraphy, as well as the chronostratigraphic investigations of the Troll core, strongly indicate that the image reflects the initial phase of an extensive Middle Pleistocene glaciation (inferred age ca 0.5 Ma), prior to the development of a massive Norwegian Channel Ice Stream. The northwesterly oriented pattern, seen in the southeastern part of the study area, demonstrates that the ice flowed into the channel mainly from the coastal zone north of Bergen. Farther west various sets of ‘fan-shaped lineations’ partly cross each other, showing that the 3D-image represents a certain short time window. In the northern study area the ice flow was dominantly northwards, and directed towards the area below the present shallow Måløy Plateau. There are no indications that the glaciers north of Sognefjorden affected the marine ice sheet.     

帕米尔东北缘地区构造变形特征与盆山结构

帕米尔东北缘乌泊尔地区是正确认识帕米尔北缘盆山结构和构造变形特征非常关键的地区,本文利用连续电磁剖面(CEMP)资料和地震资料,并结合野外地质调查资料和钻井资料,对帕米尔东北缘乌泊尔地区的盆山结构和构造变形特征进行了研究。认为帕米尔东北缘及其以北地区的盆山结构表现为帕米尔造山带向北冲断和南天山向南冲断所形成的对冲结构;帕米尔山前为基底卷入式构造,古生界—中生界沿高角度的逆冲断层推覆到新近系和第四系之上,形成山前的古生界—中生界逆冲推覆带;北侧由受乌泊尔断裂控制的深部隐伏冲断体系和浅部的第四纪背驮盆地所构成。研究区的新生代构造变形时间开始于上新世晚期,并持续变形至今,形成了下更新统西域组(Q_1x)与下伏上新统、Q_2与Q_1和Q_(3-4)与Q_2之间的不整合。研究区最小构造缩短量为48.6 km,缩短率为48.1%。     

The 2005 Heidelberg and Speyer earthquakes and their relationship to active tectonics in the central Upper Rhine Graben

We determine the source parameters of three minor earthquakes in the Upper Rhine Graben (URG), a Cenozoic rift, using waveforms from permanent and temporary seismological stations. Two shallow thrust-faulting events (M _L = 2.4 and 1.5) occurred on the rift shoulder just south of Heidelberg in March 2005. They indicate a possible movement along the sediment–crystalline interface due to tectonic loading from the near-by Odenwald. In February 2005, an earthquake with a normal-faulting mechanism occurred north of Speyer. This event (M _L = 2.8) had an unusual depth of about 22 km and a similar deep normal-faulting event occurred there in 1972 (M _L = 3.2). Other lower crustal events without fault plane solutions are known from 1981 and 1983. At such a depth, inside the lower crust, ductile behaviour instead of brittle faulting is commonly assumed and used for geodynamic modelling. Based on the newly available fault plane solutions we can confirm the brittle, extensional regime in the upper and lower crust in the central to northern URG indicated in earlier studies.