卫星重力梯度向下延拓的谱方法

本文提出在平面近似下解算卫星重力梯度向下延拓问题的谱方法，并采用模拟数据进行了试算，结果表明该方法是有效的。这为利用卫星重力梯度数据精化局部重力场提供了可供参考的方法。     

关于卫星重力梯度边值问题的准解的若干注记

研究了卫星重力梯度边值问题的准解的具体计算方法，利用地球重力场模型ＷＤＭ９４模拟的卫星重力梯度数据进行试算，验证了准解模型的有效性，并获得一些重要结论     

利用GOCE模拟观测反演重力场的Torus法

在介绍Torus方法反演地球重力场模型的基本原理和方法的基础上,基于圆环面上均匀分布的卫星引力梯度模拟观测值解算了200阶次的地球重力场模型,在无误差情况下,Torus方法解算模型的阶误差RMS小于10-16,验证了该方法的严密性。利用61dGOCE卫星轨道上无误差的模拟引力梯度观测值解算了200阶次的地球重力场模型,分析了格网化误差、极空白对解算精度的影响,迭代3次后,在不考虑低次系数情况下,模型的大地水准面阶误差和累积误差均较小,最大值仅为0.022mm和0.099mm。在沿轨卫星引力梯度模拟数据中加入5mE/Hz1/2的白噪声,基于Torus方法和空域最小二乘法解算了200阶次的地球重力场模型,Torus方法的精度略低于空域最小二乘法的精度,在不考虑低次项的情况下,两种方法解算模型的大地水准面阶误差最大值分别为1.58cm和1.45cm,累积误差最大值分别为6.37cm和5.55cm。但由于采用了二维快速傅里叶技术和块对角最小二乘法,极大地提高了计算效率。本文数值结果说明Torus方法是一种独立有效的方法,可用于GOCE任务海量卫星引力梯度观测值反演重力场的快速解算。     

卫星重力梯度数据解算位系数的最小二乘配置法

卫星重力梯度测量在恢复地球重力场的研究中已经得到了广泛应用。本文通过空间扰动位协方差函数特性,得出卫星重力梯度数据与引力位系数的相关协方差函数。利用最小二乘配置法,最终推导出由重力梯度数据直接解算引力位系数的函数表达式,并简要分析其实用性。     

星载原子干涉技术用于地球重力场测量及其精度评估

重力梯度卫星GOCE通过搭载静电式重力梯度仪,将全球静态重力场恢复至200阶以上。目前GOCE卫星已结束寿命,亟须发展下一代更高分辨率的卫星重力梯度测量来完善200~360阶的全球静态重力场模型。原子干涉型的重力梯度测量在空间微重力环境下可获得较长的干涉时间,因此具有很高的星载测量精度,是下一代卫星重力梯度测量的候选技术之一。本文针对未来更高分辨率全球重力场测量的科学需求,提出了一种适用于空间微重力环境下的原子干涉重力梯度测量方案,其梯度测量噪声可低至0.85mE/Hz1/2。文中对不同类型的卫星重力梯度测量方案进行了重力场反演精度的对比评估,仿真结果表明,相比于现有静电式卫星重力梯度测量,原子干涉型的卫星重力梯度测量有望将重力场的恢复阶数提升至252~290阶,对应的累积大地水准面误差7~8cm,累积重力异常误差3×10-5 m/s2。     

卫星重力梯度向下延拓的频域最小二乘配置法

本文深入研究频域最小二乘配置法的基本原理及其在求解卫星重力梯度向下延拓问题中的应用。与一般空域最小二乘配置法相比，该方法具有高效稳定的特点，特别适合于大规模重力场数据处理，并为利用卫星重力梯度数据精化局部重力场提供了可供参考的方法。     

GOCE实测数据反演高阶重力场模型的Torus方法

不同于当前广泛使用的空域法、时域法、直接解法,本文尝试采用Torus方法处理GOCE实测数据,利用71 d的GOCE卫星引力梯度数据反演了200阶次GOCE地球重力场模型,实现了对参考模型的精化。首先,采用Butterworth零相移滤波方法加移去—恢复技术,处理引力梯度观测值中的有色噪声,并利用泰勒级数展开和Kriging方法对GOCE卫星引力梯度数据进行归算和格网化,计算得到了名义轨道上格网点处的引力梯度数据。然后,利用2D-FFT技术和块对角最小二乘方法处理名义轨道上数据,获得了200阶次的GOCE地球重力场模型GOCE_Torus。利用中国和美国的GPS/水准数据进行外部检核结果说明,GOCE_Torus与ESA发布的同期模型的精度相当;GOCE_Torus模型与200阶次的EGM2008模型相比,在美国区域精度相当,但在中国区域精度提高了4.6 cm,这充分体现了GOCE卫星观测数据对地面重力稀疏区的贡献。Torus方法拥有快速高精度反演卫星重力场模型的优势,可以在重力梯度卫星的设计、误差分析及在轨快速评估等方面得到充分应用。     

Methodology and use of tensor invariants for satellite gravity gradiometry

Although its use is widespread in several other scientific disciplines, the theory of tensor invariants is only marginally adopted in gravity field modeling. We aim to close this gap by developing and applying the invariants approach for geopotential recovery. Gravitational tensor invariants are deduced from products of second-order derivatives of the gravitational potential. The benefit of the method presented arises from its independence of the gradiometer instrument’s orientation in space. Thus, we refrain from the classical methods for satellite gravity gradiometry analysis, i.e., in terms of individual gravity gradients, in favor of the alternative invariants approach. The invariants approach requires a tailored processing strategy. Firstly, the non-linear functionals with regard to the potential series expansion in spherical harmonics necessitates the linearization and iterative solution of the resulting least-squares problem. From the computational point of view, efficient linearization by means of perturbation theory has been adopted. It only requires the computation of reference gravity gradients. Secondly, the deduced pseudo-observations are composed of all the gravitational tensor elements, all of which require a comparable level of accuracy. Additionally, implementation of the invariants method for large data sets is a challenging task. We show the fundamentals of tensor invariants theory adapted to satellite gradiometry. With regard to the GOCE (Gravity field and steady-state Ocean Circulation Explorer) satellite gradiometry mission, we demonstrate that the iterative parameter estimation process converges within only two iterations. Additionally, for the GOCE configuration, we show the invariants approach to be insensitive to the synthesis of unobserved gravity gradients.     

An integrated wavelet concept of physical geodesy

For the determination of the earth's gravity field many types of observations are nowadays available, including terrestrial gravimetry, airborne gravimetry, satellite-to-satellite tracking, satellite gradio-metry, etc. The mathematical connection between these observables on the one hand and gravity field and shape of the earth on the other is called the integrated concept of physical geodesy. In this paper harmonic wavelets are introduced by which the gravitational part of the gravity field can be approximated progressively better and better, reflecting an increasing flow of observations. An integrated concept of physical geodesy in terms of harmonic wavelets is presented. Essential tools for approximation are integration formulas relating an integral over an internal sphere to suitable linear combinations of observation functionals, i.e. linear functionals representing the geodetic observables. A scale discrete version of multiresolution is described for approximating the gravitational potential outside and on the earth's surface. Furthermore, an exact fully discrete wavelet approximation is developed for the case of band-limited wavelets. A method for combined global outer harmonic and local harmonic wavelet modelling is proposed corresponding to realistic earth's models. As examples, the role of wavelets is discussed for the classical Stokes problem, the oblique derivative problem, satellite-to-satellite tracking, satellite gravity gradiometry and combined satellite-to-satellite tracking and gradiometry. Received: 28 February 1997 / Accepted: 17 November 1997     

航空重力梯度的多参量位场转换

目前广泛使用的非全张量航空重力梯度测量系统,不能测量重力梯度全部张量,限制了航空重力梯度的应用.因此,需要研究航空重力梯度不同分量之间的位场转换.根据重力梯度与扰动重力位内在的频率微分关系,联合多参量在拟合观测参量最优的条件下反演扰动重力位,实现了联合多参量的位场转换.实验表明,相对于传统的单参量位场转换,多参量位场转...