Boron isotope ratios of surface waters in Guadeloupe,Lesser Antilles

Large variations are reported in the B concentrations and isotopic ratios of river and thermal spring waters in Guadeloupe, Lesser Antilles. Rivers have δ¹¹B values around 40‰ and B concentrations lower than 30 μg/L, while thermal springs have δ¹¹B of 8–15‰ and B concentrations of 250–1000 μg/L. River samples strongly impacted by hydrothermal inputs have intermediate δ¹¹B and B contents. None of these surface water samples have δ¹¹B comparable to the local unweathered volcanic rocks (around 0‰), implying that a huge isotopic fractionation of 40‰ takes place during rock weathering, which could be explained by preferential incorporation of ¹⁰B during secondary mineral formation and adsorption on clays, during rock weathering or in the soils. The soil-vegetation B cycle could also be a cause for such a fractionation. Atmospheric B with δ¹¹B of 45‰ represents 25–95% of the river B content. The variety of the thermal spring chemical composition renders the understanding of B behavior in Guadeloupe hydrothermal system quite difficult. Complementary geochemical tracers would be helpful.     

The dissolution of olivine added to soil: Implications for enhanced weathering

Chemical weathering of silicate minerals consumes atmospheric CO₂ and is a fundamental component of geochemical cycles and of the climate system on long timescales. Artificial acceleration of such weathering (“enhanced weathering”) has recently been proposed as a method of mitigating anthropogenic climate change, by adding fine-grained silicate materials to continental surfaces. The efficacy of such intervention in the carbon cycle strongly depends on the mineral dissolution rates that occur, but these rates remain uncertain. Dissolution rates determined from catchment scale investigations are generally several orders of magnitude slower than those predicted from kinetic information derived from laboratory studies. Here we present results from laboratory flow-through dissolution experiments which seek to bridge this observational discrepancy by using columns of soil returned to the laboratory from a field site. We constrain the dissolution rate of olivine added to the top of one of these columns, while maintaining much of the complexity inherent in the soil environment. Continual addition of water to the top of the soil columns, and analysis of elemental composition of waters exiting at the base was conducted for a period of five months, and the solid and leachable composition of the soils was also assessed before and after the experiments. Chemical results indicate clear release of Mg²⁺ from the dissolution of olivine and, by comparison with a control case, allow the rate of olivine dissolution to be estimated between 10^−16.4 and 10^−15.5 moles(Mg) cm⁻² s⁻¹. Measurements also allow secondary mineral formation in the soil to be assessed, and suggest that no significant secondary uptake of Mg²⁺ has occurred. The olivine dissolution rates are intermediate between those of pure laboratory and field studies and provide a useful constraint on weathering processes in natural environments, such as during soil profile deepening or the addition of mineral dust or volcanic ash to soils surfaces. The dissolution rates also provide critical information for the assessment of enhanced weathering including the expected surface-area and energy requirements.     

Acidification processes and soil leaching influenced by agricultural practices revealed by strontium isotopic ratios

In natural river systems, the chemical and isotopic composition of stream- and ground waters are mainly controlled by the geology and water-rock interactions. The leaching of major cations from soils has been recognized as a possible consequence of acidic deposition from atmosphere for over 30 years. Moreover, in agricultural areas, the application of physiological acid fertilizers and nitrogen fertilizers in the ammonia form may enhance the cation leaching through the soil profile into ground- and surface waters. This origin of leached cations has been studied on two small and adjacent agricultural catchments in Brittany, western France. The study catchments are drained by two first-order streams, and mainly covered with cambisoils, issued from the alteration and weathering of a granodiorite basement. Precipitations, soil water- and NH₄ acetate-leachates, separated minerals, and stream waters have been investigated. Chemical element ratios, such as Ba/Sr, Na/Sr and Ca/Sr ratios, as well as Sr isotopic ratios are used to constrain the relative contribution from potential sources of stream water elements.Based on Sr isotopic ratio and element concentration, soil water- and NH₄ acetate leaching indicates (1) a dominant manure/slurry contribution in the top soil, representing a cation concentrated pool, with low ⁸⁷Sr/⁸⁶Sr ratios; (2) in subsoils, mineral dissolution is enhanced by fertilizer application, becoming the unique source of cations in the saprolite. The relatively high weathering rates encountered implies significant sources of cations which are not accessory minerals, but rather plagioclase and biotite dissolution.Stream water has a very different isotopic and chemical composition compared to soil water leaching suggesting that stream water chemistry is dominated by elements issued from mineral and rock weathering. Agriculture, by applications of chemical and organic fertilizers, can influence the export of major base cations, such as Na⁺. Plagioclase dissolution, rather than anthropogenically controlled soil water, seems to be the dominant source of Na⁺ in streams. However, Ca²⁺ in streams is mostly derived from slurries and manures deposited on top soils, and transferred into the soil ion-exchange pool and stream waters. Less than 10% of Na⁺, 5-40% of Sr²⁺ and 20-100% of Ca²⁺ found in streams can be directly derived from the application of organic fertilizers.     

Tracing hydrothermal mineral thenardite in geysers/hot springs of North-western Himalayan belt,Ladakh Geothermal Province,India by hydrogeochemistry,fluid-mineral equilibria and isotopic studies

The present study highlights the first evidence of hydrothermal mineral Thenardite (Na₂SO₄) from Puga geothermal area, North-western Himalayan belt in Ladakh Geothermal Province, India, which is unequivocal evidence for the presence of high-temperature hydrothermal fluid activity from one of the thickest crust areas of the Earth. The Puga geothermal belt illustrates a fault-bounded hydrothermal system with a clearly defined conductive zone, coinciding with Kiagar Tso fault typically exemplifying a shallow-level medium enthalpic geothermal reservoir. The hydrogeochemistry suggests that thermal and non-thermal waters are of Na-Cl-HCO₃ and Ca-Mg-HCO₃ type, respectively, with neutral to near alkaline pH. The silica and cation geothermometry reveal sub-surface temperatures around 150 °C and 250 °C, respectively, at shallow depth; however, >250 °C is anticipated at the deepest levels (~3 km). Stable isotope (δD and δ¹⁸O) studies explicate depletion of isotopic content for thermal waters over Puga river water and radiogenic isotope (³H) suggests matured thermal waters with ongoing water-rock interactions. The recharge altitude estimation and physiographic studies put forth that geothermal reservoir is recharged with the ice masses located at an altitude of 6458 m above mean sea level (msl) in the west of Puga valley, probably from the highest peak of Polokong La mountain. The two key processes participating in regulation of proportions of the dissolved salts in the thermal waters are silicate weathering and ion-exchange kinetics. The powder X-ray diffraction study reveals a major occurrence of hydrothermal mineral thenardite in the hot spring deposits for the first time along with huge encrustations of trona, borax, calcite and elemental sulfur. The high-temperature fluids encounter thenardite, pyrite, and jarosite-bearing minerals in basement rock causing enrichment of SO₄²⁻ and Cl⁻ in geothermal waters. The temperature-dependent speciation modelling (50 °C–200 °C) for major ion Na⁺ reveals the composition of the reservoir fluid (~150 °C): Na⁺ > NaCO₃⁻ > NaSO₄⁻ > NaHCO₃ > NaF > NaOH. A conceptual evolution model of thermal waters involving the recharge-deep circulation-mixing-discharge of thermal springs is hence put forth in the study using various hydrogeochemical insights.     

Ionic composition and mineral equilibria of acidic groundwater on the west coast of Sweden

The groundwater chemistry of 14 shallow wells and 10 springs in Halland, southwest Sweden, and precipitation have been studied in trilinear diagrams. Ionic strength and saturation index (SI) for selected minerals have been calculated. Five springwaters have similar chemical composition to that of the precipitation, which indicates surficial and rapidly recharged water. The SI of the groundwaters is out of equilibrium (undersaturated) with respect to primary silicates such as mafic minerals, feldspar, K-mica and chlorite, but in equilibrium with solid SiO₂ (quartz, cristobalite, or chalcedony). The SI shows oversaturation conditions for kaolinite, hydroxy-Al interlayered vermiculite, Na,K,Mg-beidellite, Mg-montmorillonite, and AB-montmorillonite. Concentrations of soluble Al and Si can be governed by Mg,Fe-beidellite, BF-montmorillonite, or Ca-montmorillonite at four springs, and by halloysite at two wells on the coastal plain. For these groundwaters, clay minerals may act as H⁺ buffers and thus have an influence on pH and toxic Al, i.e., parameters affecting the drinking water quality and environment. The study shows that the soil catena are intensily weathered at the investigated sites. It is further concluded that neither cation exchange nor primary silicate weathering will keep up with buffering the acidic loads into the soils. A general prediction of groundwater quality is presented.     

Seasonality of bedrock weathering chemistry and CO2 consumption in a small watershed, the White River, Vermont

The draw down of CO₂ from the atmosphere during mineral weathering plays a major role in the global budget of this greenhouse gas. Silicate minerals remove twice the CO₂ of carbonate minerals per mole of calcium in runoff during weathering. Bedrock weathering chemistry was investigated in the White River watershed of northeastern USA to investigate whether there are seasonal differences in carbonate and silicate weathering chemistry. Geographic Information Systems analyses of bedrock geology were combined with major element concentrations in river waters to gain an understanding of the consistency of mineral weathering during three seasons. The percent of carbonate mineralogy comprising the bedrock in tributaries of the White River varied from less than 5% to 45% by area. A mass balance calculation using major element concentrations in waters was applied to estimate the seasonal relationships between bedrock geology and bicarbonate flux. In all tributaries and the main stem of the White River the highest calculated percent of bicarbonate from carbonate mineral weathering was measured in the late fall. The results suggest that carbonate and silicate bedrock weathering processes are seasonally controlled. Thus single season sampling could not accurately represent an entire year's geochemical budget. In the White River, water samples obtained solely during the summer would consistently underestimate the total yearly source of bicarbonate from carbonate bedrock weathering. The same sample set would also provide data that would lead to an underestimation of the yearly atmospheric CO₂ draw down by bedrock weathering in the watershed. For example at four of the seven locations studied there was an almost two-fold difference between summer and spring calculated atmospheric CO₂ consumption rates.     

Natural variations of δSi ratios during progressive basalt weathering, Hawaiian Islands

Silicon stable isotopes can be used to trace the biogeochemical pathways of Si as it moves from its continental sources to its sink in ocean sediments. Along the way, Si is incorporated into clay minerals, taken up by plants where it forms plant opal, and leached into rivers, the major land-to-ocean conduit. Compared to igneous rocks, the waters that drain continents are enriched in heavy Si isotopes, but the mechanisms that control fractionation have not been elucidated. We studied Si isotope fractionation along a 4 million yr basaltic soil chronosequence on the Hawaiian Islands. Using the natural context of these samples in combination with laboratory experiments, we demonstrate that the isotopic composition of dissolved Si in weathering systems is determined by the combined effects of rock disintegration, clay mineral neosynthesis, and Si biocycling. Weathering preferentially releases ²⁸Si into solution, whereas secondary mineral formation preferentially removes ²⁸Si from solution. In humid environments, leached soils have lost large amounts of this soluble Si, thus creating a net loss of ³⁰Si from the entire soil system. As soils develop and greater fractions of Si reside in neoformed clay minerals, δ³⁰Si_{bulk soil} values change progressively toward more negative values; basalt δ³⁰Si values are about −0.5‰, but older soils have δ³⁰Si values up to −2.5‰. The difference between the solid and solution δ³⁰Si values remains more or less constant with progressive weathering, and therefore, soil water from older soils has a more negative δ³⁰Si composition. In the upper horizons of the Hawaiian soils, this weathering-driven δ³⁰Si shift is modified by the addition of unweathered primary minerals via dust, carrying δ³⁰Si values of about −0.5‰, and by biocycling of Si via plants, producing negative δ³⁰Si values in phytoliths and positive δ³⁰Si values in soil solutions derived from upper horizons. Due to the high concentrations of dissolved Si in these near-surface layers, rivers have more positive δ³⁰Si values than predicted based on the weathering status of the lower horizons. When combined with published δ³⁰Si values from large rivers worldwide, we find that the results from Hawaii point to weathering control of Si isotopes delivered to the oceans, and thus, to an important continent-ocean linkage that warrants further investigation.     

Kinetic modelling of geochemical processes at the Aitik mining waste rock site in northern Sweden

A steady-state geochemical model has been developed to study water-rock interactions controlling metal release from waste rock heaps at the Aitik Cu mine in northern Sweden. The Cu release in drainage waters from the site is of environmental concern. The waste rock heaps are treated as single completely mixed flow-through reactors. The geochemical model includes kinetices of sulphide and primary silicate mineral weathering, heterogeneous equilibrium with secondary mineral phases and speciation equilibrium. Field monitoring of drainage water composition provides a basis for evaluation of model performance.The relative rate of oxidative weathering of sulphides and dissolution of primary silicate minerals, using published kinetic data, are consistent with net proton and base cation fluxes at the site. The overall rate of Fe²⁺ oxidation within the heap is three orders of magnitude faster than that which could be explained by surface-catalysed reaction kinetics. This suggests significant activity of iron-oxidizing bacteria. The absolute weathering rates of sulphides and silicate minerals, normalized to a measured BET surface area, are approximately two orders of magnitude lower at field scale than published rates from laboratory experiments. Because of the relative absence of carbonate minerals, the weathering of biotite and plagioclase feldspar are important sources of alkalinity.     

Silicate and carbonate mineral weathering in soil profiles developed on Pleistocene glacial drift (Michigan, USA): Mass balances based on soil water geochemistry

Geochemistry of soil, soil water, and soil gas was characterized in representative soil profiles of three Michigan watersheds. Because of differences in source regions, parent materials in the Upper Peninsula of Michigan (the Tahquamenon watershed) contain only silicates, while those in the Lower Peninsula (the Cheboygan and the Huron watersheds) have significant mixtures of silicate and carbonate minerals. These differences in soil mineralogy and climate conditions permit us to examine controls on carbonate and silicate mineral weathering rates and to better define the importance of silicate versus carbonate dissolution in the early stage of soil-water cation acquisition.Soil waters of the Tahquamenon watershed are the most dilute; solutes reflect amphibole and plagioclase dissolution along with significant contributions from atmospheric precipitation sources. Soil waters in the Cheboygan and the Huron watersheds begin their evolution as relatively dilute solutions dominated by silicate weathering in shallow carbonate-free soil horizons. Here, silicate dissolution is rapid and reaction rates dominantly are controlled by mineral abundances. In the deeper soil horizons, silicate dissolution slows down and soil-water chemistry is dominated by calcite and dolomite weathering, where solutions reach equilibrium with carbonate minerals within the soil profile. Thus, carbonate weathering intensities are dominantly controlled by annual precipitation, temperature and soil pCO₂. Results of a conceptual model support these field observations, implying that dolomite and calcite are dissolving at a similar rate, and further dissolution of more soluble dolomite after calcite equilibrium produces higher dissolved inorganic carbon concentrations and a Mg²⁺/Ca²⁺ ratio of 0.4.Mass balance calculations show that overall, silicate minerals and atmospheric inputs generally contribute <10% of Ca²⁺ and Mg²⁺ in natural waters. Dolomite dissolution appears to be a major process, rivaling calcite dissolution as a control on divalent cation and inorganic carbon contents of soil waters. Furthermore, the fraction of Mg²⁺ derived from silicate mineral weathering is much smaller than most of the values previously estimated from riverine chemistry.     

Sr isotopes in natural waters: Applications to source characterisation and water–rock interaction in contrasting landscapes

Strontium isotopes (⁸⁷Sr/⁸⁶Sr) are routinely measured in hydrochemical studies to determine sources and mixing relationships. They have proved particularly useful in determining weathering processes and quantifying end-member mixing processes. A number of routine case studies are presented which highlight that Sr isotopes represent a powerful tool in the geochemists toolbox helping to constrain weathering reactions, weathering rates, flow pathways and mixing scenarios. Differences in methodologies for determining the weathering component in natural environments, inherent differences in weathering rates of different minerals, and mineral heterogeneity often cause difficulties in defining the weathering component of different catchments or aquifer systems. Nevertheless, Sr isotopes are useful when combined with other hydrochemical data, to constrain models of water–rock interaction and mixing as well as geochemical processes such as ion-exchange. This paper presents a summary of recent work by the authors in constraining the sources of waters and weathering processes in surface catchments and aquifers, and indicates cases where Sr isotopes alone are insufficient to solve hydrological problems.     

Controls on the chemistry of springs at Teels Marsh,Mineral County,Nevada

Evaporative process plays a dominant role in determining the water chemistry of the springs at Teels Marsh, a closed basin in western Nevada. Analysis of the spring waters indicates that calcium, magnesium, sulfate, and silica are removed from solution during dry periods, even though groundwater is undersaturated with respect to gypsum, amorphous silica, and sepiolite. The removal mechanism is precipitation of authigenic phases such as gypsum above the water table, in the vadose zone.In episodes of rain and snowfall in which none of the waters enters the phreatic zone, ions in the rain and snow accumulate near the ground surface. This accumulation of material, together with the sparse rain and snowfall, inhibits chemical weathering of silicate minerals. Only at high elevations in the basin is there sufficient fluxing of water through the alluvium for silicate weathering to make a significant contribution to the sodium content of the springs. When a sufficiently heavy rainfall occurs, salts are partially dissolved and the ions transported to the permanent groundwater. The kinetics of dissolution of secondary phases in the vadose zone exert an important control on the composition of the springs.     

A geochemical evaluation of perennial spring activity and associated mineral precipitates at Expedition Fjord,Axel Heiberg Island,Canadian High Arctic

Two groups of perennial springs are observed in the Canadian High Arctic at Expedition Fjord on Axel Heiberg Island at Colour Peak and Gypsum Hill. Saline discharge (∼1.3–2.5 molal NaCl) produces a variety of calcite (travertine) and gypsum-rich precipitates. Saturation index calculations of the spring waters at Colour Peak suggest CO₂ degassing from the waters causes calcite precipitation. Gypsum precipitation dominates at Gypsum Hill, where spring waters have lower alkalinity and higher SO₄ concentrations. Mineral accumulations form both channel and rimstone pool morphologies as a result of varying slope conditions. At Colour Peak, confined flow in steep slope areas develop massive structures in contrast to more friable, porous accumulations in areas where waters fan out on shallower slopes; these morphological variations lead to corresponding varying apparent rates of mineral precipitation. Mineral precipitation at Gypsum Hill is far less notable as a result of lower discharge rates and annual degradation by icing formation. Microscopic observations and geochemical analyses of the channel precipitates at Colour Peak reveal alternating light (calcite spar) and dark (anhedral microcrystalline calcite combined with organic matter and non-carbonate minerals) laminae. Rimstone pools forming in lower sections of spring discharge are composed of accumulations of large euhedral calcite crystals interbedded with allochthonous inputs. High concentration of dissolved solids is responsible for slow travertine precipitation rates, which occurs during winter. This precipitation is further retarded during summer months by the introduction of crystal growth inhibitors such as Fe³⁺ and deposition of organic matter and soil sediments.     

Hepburn Spa: cold carbonated mineral waters of Central Victoria,South Eastern Australia

Hepburn Spring is the major cold carbonated mineral spring of the ‘Spa’ country of Central Victoria, in South Eastern Australia. The spring occurs in a small tributary valley of the Loddon River, 15 km away from the crest of the Great Dividing Range. The waters are effervescent, have an alkalinity of around 1,500 mg/L (as HCO₃ ⁻), are mildly acidic and have high iron concentrations. Hepburn Spring is one of nearly 100 small cold low flow carbonated mineral water springs that occur in the region. Hepburn Spring has been protected since 1865 in one of 34 ‘Special Mineral Spring Reserves’. By world standards the spring is small and not highly developed, but it retains much of its charm due to the bushland, forest setting. The bedrock of the region consists of indurated arkosic sandstones interbedded with carbonaceous shales and slates. The rocks are folded and cut by swarms of strongly developed meridional fissure fault systems. Hepburn Spring is situated on the fault and fold axes associated with the “Cornish line” and Gold mines have dewatered the spring on several occasions. After dewatering events the water level and flow recovered first and then the water composition and effervescence. The origin of the effervescent waters has attracted much attention; hypotheses include both a volcanic and a rock water reaction origin. The second hypothesis involves weathering of the carbonaceous and sometimes pyritic rock mass which contains only a few percent carbonate. This process produces high bicarbonate groundwater throughout Central Victoria. The Hepburn waters are a variant of these waters and it is suggested that controls on the carbonate solubility and redox conditions in the fissures flow systems results in effervescent waters as the waters ascend.     

The influence of soil age on calculated mineral weathering rates

Mineral weathering rates for two chronosequences of soils have been calculated using an empirical method based on mineralogy, the depletion of elements relative to a conservative element and the computer model PROFILE. Weathering rates calculated by the empirical and depletion methods showed a decrease in rates with soil age whilst those calculated using the PROFILE model showed an increase with soil age. The counter intuitive PROFILE prediction is due to the use of surface area—normalised reaction rate coefficients which assume that: 1) mineral reactivity is constant with time and, 2) total mineral surface area is equivalent to reactive surface area.In Europe, mineral weathering rates in soils are an important input in determining levels of acid deposition above which ecosystem damage will occur (critical loads). As soils in Great Britain and much of NW Europe can range in age from <10³ to >10⁵ a, it is suggested that, until computer models can take account of soil age and the concomitant changes in mineral reactivity and surface area, modelled weathering rates will be subject to large uncertainties     

Behaviour of lithium and its isotopes during weathering in the Mackenzie Basin, Canada

We report Li isotopic compositions, for river waters and suspended sediments, of about 40 rivers sampled within the Mackenzie River Basin in northwestern Canada. The aim of this study is to characterize the behaviour of Li and its isotopes during weathering at the scale of a large mixed lithology basin. The Mackenzie River waters display systematically heavier Li isotopic compositions relative to source rocks and suspended sediments. The range in δ⁷Li is larger in dissolved load (from +9.3‰ to +29.0‰) compared to suspended sediments (from −1.7‰ to +3.2‰), which are not significantly different from δ⁷Li values in bedrocks. Our study shows that dissolved Li is essentially derived from the weathering of silicates and that its isotopic composition in the dissolved load is inversely correlated with its relative mobility when compared to Na. The highest enrichment of ⁷Li in the dissolved load is reported when Li is not or poorly incorporated in secondary phases after its release into solution by mineral dissolution. This counterintuitive observation is interpreted by the mixing of water types derived from two different weathering regimes producing different Li isotopic compositions within the Mackenzie River Basin. The incipient weathering regime characterizing the Rocky Mountains and the Shield areas produces ⁷Li enrichment in the fluid phase that is most simply explained by the precipitation of oxyhydroxide phases fractionating Li isotopes. The second weathering regime is found in the lowland area and produces the lower δ⁷Li waters (but still enriched in ⁷Li compared to bedrocks) and the most Li-depleted waters (compared to Na). Fractionation factors suggest that the incorporation of Li in clay minerals is the mechanism that explains the isotopic composition of the lowland rivers. The correlation of boron and lithium concentrations found in the dissolved load of the Mackenzie Rivers suggests that precipitation of clay minerals is favoured by the relatively high residence time of water in groundwater. In the Shield and Rocky Mountains, Li isotopes suggest that clay minerals are not forming and that secondary minerals with stronger affinity for ⁷Li appear.Although the weathering mechanisms operating in the Mackenzie Basin need to be characterized more precisely, the Li isotope data reported here clearly show the control of Li isotopes by the weathering intensity. The spatial diversity of weathering regimes, resulting from a complex combination of factors such as topography, geology, climate and hydrology explains, in fine, the spatial distribution of Li isotopic ratios in the large drainage basin of the Mackenzie River. There is no simple relationship between Li isotopic composition and chemical denudation fluxes in the Mackenzie River Basin.     

Hydrogeochemistry in the Vouga River basin (central Portugal): Pollution and chemical weathering

To quantify and explain the contributions by pollution and chemical weathering to their composition, we studied the chemistries of springs and surface waters in the mountainous part of the Vouga River basin. Water samples were collected during a number of consecutive summer campaigns. Recharge rates were derived from monitored discharge rates within the basin. Very large contributions by meteoric, agricultural and domestic sources to the water chemistries were found, identified by the chloride, sulfate and nitrate concentrations: on average only 1/4 to 1/3 of the solutes could be attributed to chemical weathering. Two petrologic units characterize the river basin: granites and metasediments. The waters collected within metasediment units are distinct from those in granite terrain by a higher magnesium concentration. On that basis, it could be estimated that the Rio Vouga, when leaving the mountainous part of the basin, has for some 2/5 a signature determined by chemical weathering in the metasediments. The dominant primary minerals subject to chemical weathering are plagioclase (Pl) and biotite (in granite) or Pl and chlorite (in metasediment). Kaolinite, gibbsite and vermiculite are the major weathering products where annual precipitation (P) > 1000 mm y⁻¹, and kaolinite, vermiculite and smectite where P was lower. Using an algorithm based on the ratio of dissolved silica to bicarbonate, the contributions of chemical weathering of primary minerals could be unraveled. The results show that in granite the export rate (as mol ha⁻¹ y⁻¹ wt%mineral⁻¹) of oligoclase (Pl with An_10–30) was 5.0 ± 2.6 and of biotite 3.2 ± 2.6, while in metasediment these rates for albite (Pl with An_0–10) are 16.5 ± 8.9 and for chlorite are 0.5 ± 0.5. The observed decrease of dissolved silica in surface waters relative to springs was ascribed to (summer) uptake by aquatic biota.     

Weathering, dust, and biocycling effects on soil silicon isotope ratios

Silicon isotope ratios (δ³⁰Si) of bulk mineral materials in soil integrate effects from both silicon sources and processing. Here we report δ³⁰Si values from a climate gradient of Hawaiian soils developed on 170 ka basalt and relate them to patterns of soil chemistry and mineralogy. The results demonstrate informative relationships between the mass fraction of soil Si depletion and δ³⁰Si. In upper (<1 m deep) soil horizons along the climate gradient, Si depletion correlates with decreases of residual δ³⁰Si values in low rainfall soils and increases in high rainfall soils. Strong positive correlation between soil δ³⁰Si and dust-derived quartz and mica content show that both trends are largely controlled by the abundance of these weathering-resistant minerals. The data also lend support to the idea that fractionation of Si isotopes in secondary phases is controlled by partitioning of silicon between dissolved and precipitated products during the initial weathering of primary basalt. Secondary mineral δ³⁰Si values from lower (>1 m deep) soil horizons generally correlate with the isotope fractionation predicted by a study of dissolved Si in basalt-watershed rivers and driven by preferential ²⁸Si removal from the dissolved phase during precipitation. In contrast, after correcting for the influence of dust, secondary mineral Si depletion and δ³⁰Si values in shallow (<1 m deep) soil horizons showed evidence of biocycling induced Si redistribution and substantially lower δ³⁰Si values than predicted. Low δ³⁰Si values in shallow soil horizons compared to predictions can be attributed to repeated fractionation as secondary minerals undergo additional cycles of dissolution and precipitation. Primary mineral weathering, secondary mineral weathering, dust accumulation, and biocycling are major processes in terrestrial Si cycling and these results demonstrate that each can be traced by δ³⁰Si values interpreted in conjunction with mineralogy and measures of Si depletion.     

Interactions between <Emphasis Type="Italic">Bacillus mucilaginosus</Emphasis> and silicate minerals (weathered adamellite and feldspar): Weathering rate,products, and reaction mechanisms

Bacillus mucilaginosus is a common soil bacterium,and usually used as a model bacterium in studying microbe-mineral interactions.Several reaction mechanisms of B.mucilaginosus weathering silicate minerals were proposed.However,the molecule mechanisms and detailed processes were still unclear.In this paper,bacterium-mineral interactions were studied in terms of variations in pH value over the experimental period,variations in mineral composition,weathering rates of silicate minerals and volatile metabolites in the culture medium,etc.,to further explore the bacterium-mineral interaction mechanisms.The results showed that B.mucilaginosus could enhance silicate mineral weathering obviously.The weathering rates were quite different for various kinds of silicate minerals,and the weathering rate of weathered adamellite could reach 150 mg/m2/d.Although B.mucilaginosus produced little acidic substance,pH in the microenvironment of bacterium-mineral complex might be far lower than that of the circumjacent environment;a large amount of acetic acid was found in the metabolites,and was likely to play an important role as a ligand.These results appear to suggest that acidolysis and ligand degradation are the main mechanisms of B.mucilaginosus dissolving silicate minerals,the formation of bacterium-mineral complexes is the necessary condition for the bacteria weathering silicate minerals,and extracelluar polysaccharides played important roles in bacterium-mineral interaction processes by forming bacterium-mineral complexes and maintaining the spe-cial physicochemical properties of microenvironment.     

Characterization of hydrogeochemical process and evaluation of water quality of seven geothermal springs,Bakreswar, India

A study was conducted in seven geothermal springs located in Bakreswar, District Birbhum, West Bengal, India, in order to assess numerous geochemical processes which were responsible for chemical composition of thermal and mineralized water. The study area lies over the Sone, Narmada, and Tapti lineament of Precambrian Chotanagpur Gneissic Complex. Water chemistry has been carried out based on reaction stoichiometry and geo-statistical tools to identify geochemical process. Piper and Gibbs diagram suggest that the spring water belongs to Ca²⁺-Mg²⁺-HCO₃^??+?CO₃^2? water type and are controlled by rock dominance. Dissolution and precipitation of calcite, dolomite, gypsum, and fluorite minerals were identified as principle source of major ions in seven geothermal spring water. Principle component analyses revealed that major ions of spring water are derived from geogenic processes such as weathering, dissolution, and precipitation of various minerals. Overall results suggest that major ions of the spring’s water are derived from natural origin because no evidence of anthropogenic sources was observed during the study period. This study has also revealed that water quality of spring’s water is not suitable for drinking purposes and quite suitable for irrigation because of high abundance of Na⁺, K⁺, Cl^?, and HCO₃^? ions.     

Ge/Si and Sr/Sr tracers of weathering reactions and hydrologic pathways in a tropical granitoid system

Ge/Si and ⁸⁷Sr/⁸⁶Sr data from primary and secondary minerals, soil waters, and stream waters in a tropical granitoid catchment quantitatively reflect mineral alteration reactions that occur at different levels within the bedrock–saprolite–soil zone. Near the bedrock–saprolite interface, plagioclase to kaolinite reaction yields low Ge/Si and 87Sr/86Sr. Higher in the regolith column, biotite weathering and kaolinite dissolution drive Ge/Si and 87Sr/86Sr to high values. Data from streams at base flow sample the bedrock–saprolite interface zone, while at high discharge solutes are derived from upper saprolite–soil zone. Coupled Ge/Si and 87Sr/86Sr can be effective tools for quantifying the importance of specific weathering reactions, and for geochemical hydrograph separation.