Time constraints on deformation of the Ajjaj branch of one of the largest Proterozoic shear zones on Earth: The Najd Fault System

In active tectonic regions, shear zones play an important role in re-configuring the structure of the lithosphere. One of the largest shear zones on Earth is the Najd Fault System of the Arabian–Nubian Shield. The main active phase of this shear zone was during the last stages of the Pan-African Orogeny (ca. 630–540 Ma). Six samples of intrusive rocks that were emplaced into the shear zone at different stages during its active phase are used to illustrate the progressive evolution of the Ajjaj shear zone. A sample of coarse-grained diorite, with an intercept U–Pb zircon age of 696 ± 6 Ma, shows very weak deformation. Two samples from deformed granodiorite–tonalite intrusions at the border of the Ajjaj shear zone show conspicuous degrees of deformation, and define two U–Pb clusters of concordia ages at 747 ± 12 Ma–668 ± 8 Ma and 742 ± 5 Ma–702 ± 12 Ma. Two samples of granites show mylonitic foliation with flattened quartz and biotite parallel to the trend of the shear zone. These samples yield U–Pb ages of 601 ± 3 Ma–584 ± 3 Ma. Another granite sample is undeformed and shows cross-cutting relations with the shear foliation of the Ajjaj shear zone. It yields a concordia age of 581 ± 4 Ma. The metamorphic rocks of the Hamadat complex host the Ajjaj shear zone, and have been useful in determining the metamorphic P-T conditions attending the activity of the shear zone. The peak metamorphism of the Hamadat Complex is 505–700 °C at two ranges of pressure 8–11 and 14.5 ± 2 kbar. New data confine the activation of the Ajjaj shear zone in a limited period of time between 604 Ma and 581 Ma and the operation at different crustal levels with a maximum depth of 58 km.     

The Arequipa Massif of Peru: New SHRIMP and isotope constraints on a Paleoproterozoic inlier in the Grenvillian orogen

The enigmatic Arequipa Massif of southwestern Peru is an outcrop of Andean basement that underwent Grenville-age metamorphism, and as such it is important for the better constraint of Laurentia–Amazonia ties in Rodinia reconstruction models. U–Pb SHRIMP zircon dating has yielded new evidence on the evolution of the Massif between Middle Paleoproterozoic and Early Paleozoic. The oldest rock-forming events occurred in major orogenic events between ca. 1.79 and 2.1 Ga (Orosirian to Rhyacian), involving early magmatism (1.89–2.1 Ga, presumably emplaced through partly Archaean continental crust), sedimentation of a thick sequence of terrigenous sediments, UHT metamorphism at ca. 1.87 Ga, and late felsic magmatism at ca. 1.79 Ga. The Atico sedimentary basin developed in the Late-Mesoproterozoic and detrital zircons were fed from a source area similar to the high-grade Paleoproterozoic basement, but also from an unknown source that provided Mesoproterozoic zircons of 1200–1600 Ma. The Grenville-age metamorphism was of low-P type; it both reworked the Paleoproterozoic rocks and also affected the Atico sedimentary rocks. Metamorphism was diachronous: ca. 1040 Ma in the Quilca and Camaná areas and in the San Juán Marcona domain, 940 ± 6 Ma in the Mollendo area, and between 1000 and 850 Ma in the Atico domain. These metamorphic domains are probably tectonically juxtaposed. Comparison with coeval Grenvillian processes in Laurentia and in southern Amazonia raises the possibility that Grenvillian metamorphism in the Arequipa Massif resulted from extension and not from collision. The Arequipa Massif experienced Ordovician–Silurian magmatism at ca. 465 Ma, including anorthosites formerly considered to be Grenvillian, and high-T metamorphism deep within the magmatic arc. Focused retrogression along shear zones or unconformities took place between 430 and 440 Ma.     

New Lu–Hf and Sm–Nd geochronology constrains the subduction of oceanic crust during the Carboniferous–Permian in the Dabie orogen

Eclogites from the Huwan shear zone in the western Dabie were investigated in terms of their P–T evolution, geochemistry, and combined Lu–Hf and Sm–Nd geochronology. Trace element and isotope data suggest a normal mid-ocean ridge rather than an intraplate or ocean island setting for the protoliths of the eclogites. Electron microprobe analyses of representative garnets show typical prograde zoning profiles. Estimated peak metamorphic temperatures of 540–590 °C most likely did not exceed the closure temperature of the Lu–Hf and Sm–Nd systems. The consistent Lu–Hf and Sm–Nd ages, therefore, most likely reflect garnet growth and are interpreted to reflect high-pressure eclogite-facies metamorphism due to the occurrence of omphacite inclusions from core to rim in garnets and the spherical geometry effect despite the well-preserved prograde zoning in the garnets. The high-pressure mineral assemblage of the eclogite yielded a statistically robust Lu–Hf age of 260.0 ± 1.0 Ma (2σ, 10 points, MSWD = 1.0) and a Sm–Nd age of 260.4 ± 2.0 Ma (2σ, 9 points, MSWD = 1.4), which are younger than the Carboniferous zircon U–Pb ages of ca. 310 Ma. The new Lu–Hf and Sm–Nd data, in combination with published geochronological data, define two distinct Carboniferous and Permian population ages for the oceanic-type eclogites from the Huwan shear zone, which may require that these rocks experienced two episodes of high-pressure metamorphism within less than 50 Myr.     

Structural events and metamorphic consequences in Almora Nappe,during Himalayan collision tectonics

Almora Nappe in Uttarakhand, India, is a Lesser Himalayan representative of the Himalayan Metamorphic Belt that was tectonically transported over the Main Central Thrust (MCT) from Higher Himalaya. The Basal Shear zone of Almora Nappe shows complicated structural pattern of polyphase deformation and metamorphism. The rocks exposed along the northern and southern margins of this nappe are highly mylonitized while the degree of mylonitization decreases towards the central part where the rocks eventually grade into unmylonitized metamorphics.Mylonitized rocks near the roof of the Basal Shear zone show dynamic metamorphism (M₂) reaching upto greenschist facies (～450 °C/4 kbar). In the central part of nappe the unmylonitized schists and gneisses are affected by regional metamorphism (M₁) reaching upper amphibolite facies (～4.0–7.9 kbar and ～500–709 °C). Four zones of regional metamorphism progressing from chlorite–biotite to sillimanite–K-feldspar zone demarcated by specific reaction isograds have been identified. These metamorphic zones show a repetition suggesting that the zones are involved in tight F₂ – folding which has affected the metamorphics. South of the Almora town, the regionally metamorphosed rocks have been intruded by Almora Granite (560 ± 20 Ma) resulting in contact metamorphism. The contact metamorphic signatures overprint the regional S₂ foliation. It is inferred that the dominant regional metamorphism in Almora Nappe is highly likely to be of pre-Himalayan (Precambrian!) age.     

Syn-kinematic emplacement of the Pangong metamorphic and magmatic complex along the Karakorum Fault (N Ladakh)

This paper investigates the age, P–T conditions and kinematics of Karakorum Fault (KF) zone rocks in the NW part of the Himalaya–Karakorum belt. Granulite to greenschist facies assemblages were developed within the KF zone during strike-slip shearing. The granulites were formed at high temperature (800 °C, 5.5 kbar), were subsequently retromorphosed into the amphibolite facies (700–750 °C, 4–5 kbar) and the greenschist facies (350–400 °C, 3–4 kbar). The Tangtse granite emplaced syn-kinematically at the contact between a LT and the HT granulite facies. Intrusion occurred during the juxtaposition of the two units under amphibolite conditions. Microstructures observed within the Tangtse granite exhibit a syn-magmatic dextral S–C fabric. Compiled U–Pb and Ar–Ar data show that in the central KF segment, granulite facies metamorphism occurred at a minimum age of 32 Ma, subsequent amphibolite facies metamorphism at 20–18 Ma. Further shearing under amphibolite facies (650–500 °C) was recorded at 13.6 ± 0.9 Ma, and greenschist-facies mica growth at 11 Ma. These data give further constrains to the age of initiation and depth of the Karakorum Fault. The granulite-facies conditions suggest that the KF, accommodating the lateral extrusion of Tibet, could be at least a crustal or even a Lithosphere-scale shear zone comparable to other peri-Himalayan faults.     

Metamorphism of volcanogenic massive sulphide deposits in the Urals. Ore geology

The Urals VMS province comprises a broad spectrum of variably metamorphosed deposits, from unmetamorphosed to those without any primary ore textures, which are the results of high-grade metamorphic processes. Contact metamorphism near large granite and granodiorite plutons caused the most significant changes of ores, with coarse-grained to pegmatoidal ores with magnetite closest to its contact with the intrusion, followed by pyrrhotite-enriched copper ores, and more distal zinc (± Pb ± Ag) mineralisation. Koktau, Tarnyer and Vesenneye deposits are metamorphosed to the hornblende-hornfels and pyroxene-hornfels facies (t = 400–800 °C, P = 1–6 kbar). Metamorphism of Tash-Yar, Dzhusinskoe and Krasnogvardeiskoe deposits corresponds to the greenschist and albite-epidote-hornfels facies (t = 250–450 °C, P = 1–4 kbar).The regional metamorphism of VMS ores varies from prehnite-pumpellyite facies (t = 150–300 °C, P = 0.5–4 kbar) in the South Urals to the epidote-amphibolite and amphibolite facies (t = 400–600 °C (up to 700 °C), P = 1–6 kbar) in the Karabash area in the Middle Urals. In the Magnitogorsk zone, the metamorphism of host rocks and VMS bodies increases to the north, reaching its peak near the Ufa promontory of the East European platform. With increased metamorphism, the morphology of orebodies evolves from gently dipping thick lenses (Alexandrinskoe and Uzelga fields), to subvertical and folded (Uchaly and Novo-Uchaly deposits) and pseudomonoclinal steeply-dipping vein-like bodies (Karabash district).The massive sulphide transformation in PTX-gradient fields led to partial redistribution of ore material. An enrichment in Cu, Zn, Ag and Au, ± Pb occur in the uppermost parts of large steeply-dipping massive sulphide lenses in wide tectonic zones (e.g., Gai deposit) or as gold-sulphide disseminated bodies near large metamorphosed VMS lenses, distal to a granite pluton (Tarnyer deposit). Partial melting probably occurred in some highly metamorphosed deposits (Tarnyer, Koktau and Mauk). Redeposition of base metals sulphides (chalcopyrite, tennantite, sphalerite, ± bornite, galena), as well as the presence of “visible” gold and tellurides, took place during retrograde metamorphism, which produced a transfer of ore matter towards the low stress areas, such as the outer parts of shear zones, the uppermost parts of steeply-dipping ore lenses, pressure shadows, hinge zones of small folds, and small extension fractures (i.e., Alpine-type veins) in deformed ore body or its immediate surroundings.     

Shifting zonal patterns of the southern boreal forest in eastern Canada associated with changing fire regime during the Holocene

This research aims at uncovering the stand-scale Holocene fire history of balsam fir forest stands from two bioclimatic zones of the boreal forest and assessing the existence of a sub-continental shift in past fire activity that could have triggered a change in the Holocene zonal pattern. In eastern Canada, the extant closed-crown boreal forest corresponds to two ecological regions separated along 49°N, the northern black spruce zone and the southern balsam fir zone. We sampled balsam fir stands from the southern fir zone (n = 7) and among the northernmost patches of fir forest located far beyond the fir zone boundary, into the spruce zone (n = 6). Macrofossil analysis of charcoal in mineral soils was used to reconstruct both the stand-scale and regional Holocene fire histories. Data were interpreted in the context of published palaeoecological evidence. Stands of the balsam fir zone were submitted to recurrent fire disturbances between c. 9000 and 5000 cal. yr B.P. Local fire histories suggested that four sites within the fir zone escaped fire during the Holocene. Such fire protected sites allowed the continuous maintenance of the balsam fir forest in the southern boreal landscape. Stands of the spruce zone have been affected by recurrent fires from 5000 cal. yr B.P. to present. Local fire histories indicated that no site escaped fire in this zone. Published palaeoecological data suggested that balsam fir migrated to its current northern limit sometime between 7300 and 6200 cal. yr B.P. A change of the fire regime 5000 years ago caused the regional decline of an historical northern balsam fir forest and its replacement by black spruce forest. The consequence was a sub-continental reshuffling of the fir and spruce zones within the closed-crown boreal forest. The macrofossil analysis of charcoal in mineral soils was instrumental to the reconstruction of stand-scale Holocene fire history at sites where no other in situ fire proxies were available.     

Petrological evolution of silica-undersaturated sapphirine-bearing granulite in the Paleoproterozoic Salvador–Curaçá Belt,Bahia, Brazil

The Salvador–Curaçá Belt, located in São Francisco Craton, Brazil, was subjected to granulite facies metamorphism during the Paleoproterozoic orogeny (c. 2.0 Ga). Well preserved in enclaves of silica-undersaturated sapphirine-bearing granulite occur in a charnockite outcrop located along a kilometric-scale shear zone. The sapphirine-bearing granulite preserves domains with distinct mineral assemblages that record interactions between melt and peritectic phases (orthopyroxene₁ + spinel₁ + biotite₁). Sapphirine was crystallized in the Si-poor cores of the enclaves, sillimanite and spinel–cordierite symplectites in the intermediate Si-rich domains between cores and margins, and garnet and quartz-bearing cordierite/biotite symplectites in Si-rich margins of the enclaves. Melt-rock interactions and metamorphism occurred at ultrahigh temperatures of 900–950 °C at 7.0–8.0 kbar pressures. The mineralogical evolution of the domains reflects not only the influence of changes in bulk composition in the equilibrium volume of the reactions but also P–T changes during orogeny evolution. Electron microprobe dating of monazite both in the sapphirine-bearing granulite and charnockite indicates UHT metamorphism timing at c. 2.08–2.05 Ga that is related to global Paleoproterozoic UHT metamorphic events that occurred during the Columbia supercontinent assembly.     

The Mejillonia suspect terrane (Northern Chile): Late Triassic fast burial and metamorphism of sediments in a magmatic arc environment extending into the Early Jurassic

The Mejillonia terrane, named after the Mejillones Peninsula (northern Chile), has been traditionally considered an early Paleozoic block of metamorphic and igneous rocks displaced along the northern Andean margin in the Mesozoic. However, U–Pb SHRIMP zircon dating of metasedimentary and igneous rocks shows that the sedimentary protoliths were Triassic, and that metamorphism and magmatism took place in the Late Triassic (Norian). Field evidence combined with zircon dating (detrital and metamorphic) further suggests that the sedimentary protoliths were buried, deformed (foliated and folded) and metamorphosed very rapidly, probably within few million years, at ca. 210 Ma. The metasedimentary wedge was then uplifted and intruded by a late arc-related tonalite body (Morro Mejillones) at 208 ± 2 Ma, only a short time after the peak of metamorphism. The Mejillones metamorphic and igneous basement represents an accretionary wedge or marginal basin that underwent contractional deformation and metamorphism at the end of a Late Permian to Late Triassic anorogenic episode that is well known in Chile and Argentina. Renewal of subduction along the pre-Andean continental margin in the Late Triassic and the development of new subduction-related magmatism are probably represented by the Early Jurassic Bólfin–Punta Tetas magmatic arc in the southern part of the peninsula, for which an age of 184 ± 1 Ma was determined. We suggest retaining the classification of Mejillonia as a tectonostratigraphic terrane, albeit in this new context.     

Contrasting coeval paragenesis of gold and scheelite in an orogenic hydrothermal system,Macraes mine,New Zealand

The Macraes deposit (> 10 Moz resource) is a Cretaceous orogenic system hosted in the Hyde-Macraes Shear Zone (HMSZ) which was mineralised under lower greenschist facies during later stages of lower greenschist facies metamorphism of host metasedimentary schists. Gold is encapsulated primarily in sulphides that have replaced silicates in ductile shears that are focussed in micaceous rocks. The shears anastomose around structurally competent lenses, and were enhanced by hydrothermal graphite deposition and alteration of albite to muscovite. In contrast, scheelite with minor auriferous sulphides occurs in multigenerational quartz veins that filled fractures in competent lithologies. Hence, scheelite was deposited coevally with gold, from the same hydrothermal fluid, but in different structural settings from most gold at all scales from millimetres to hundreds of metres. Consequentially, there is weak correlation between Au and W at all scales in the deposit. Multigenerational gold and scheelite mineralisation occurred during progressive deformation in the shear zone in two contrasting structural and mineralogical styles in syn-deformationally weakening gold-bearing micaceous shears, and in syn-deformationally hardened competent rocks that became silicified and veined with quartz and scheelite. Hydrothermal fluid flow in the gold-bearing shears occurred at the grain boundary, microshear, and microfracture scales, and was slow (< 1 m/year), continuous, and pervasive. In contrast, vein formation in more competent lithologies was episodic, locally rapid (> hundreds of m/year), and was controlled by fracture permeability. The Au and W enrichment in the Macraes deposit resulted from regional scale metal mobility, driven by coeval recrystallisation in higher-grade (upper greenschist to amphibolite facies) metamorphism that persisted structurally below the Macraes deposit for at least 10 Ma after mineralisation ceased.     

Metamorphism and tectonic evolution of the Lhasa terrane,Central Tibet

The Lhasa terrane in southern Tibet is composed of Precambrian crystalline basement, Paleozoic to Mesozoic sedimentary strata and Paleozoic to Cenozoic magmatic rocks. This terrane has long been accepted as the last crustal block to be accreted with Eurasia prior to its collision with the northward drifting Indian continent in the Cenozoic. Thus, the Lhasa terrane is the key for revealing the origin and evolutionary history of the Himalayan–Tibetan orogen. Although previous models on the tectonic development of the orogen have much evidence from the Lhasa terrane, the metamorphic history of this terrane was rarely considered. This paper provides an overview of the temporal and spatial characteristics of metamorphism in the Lhasa terrane based mostly on the recent results from our group, and evaluates the geodynamic settings and tectonic significance. The Lhasa terrane experienced multistage metamorphism, including the Neoproterozoic and Late Paleozoic HP metamorphism in the oceanic subduction realm, the Early Paleozoic and Early Mesozoic MP metamorphism in the continent–continent collisional zone, the Late Cretaceous HT/MP metamorphism in the mid-oceanic ridge subduction zone, and two stages of Cenozoic MP metamorphism in the thickened crust above the continental subduction zone. These metamorphic and associated magmatic events reveal that the Lhasa terrane experienced a complex tectonic evolution from the Neoproterozoic to Cenozoic. The main conclusions arising from our synthesis are as follows: (1) The Lhasa block consists of the North and South Lhasa terranes, separated by the Paleo-Tethys Ocean and the subsequent Late Paleozoic suture zone. (2) The crystalline basement of the North Lhasa terrane includes Neoproterozoic oceanic crustal rocks, representing probably the remnants of the Mozambique Ocean derived from the break-up of the Rodinia supercontinent. (3) The oceanic crustal basement of North Lhasa witnessed a Late Cryogenian (~ 650 Ma) HP metamorphism and an Early Paleozoic (~ 485 Ma) MP metamorphism in the subduction realm associated with the closure of the Mozambique Ocean and the final amalgamation of Eastern and Western Gondwana, suggesting that the North Lhasa terrane might have been partly derived from the northern segment of the East African Orogen. (4) The northern margin of Indian continent, including the North and South Lhasa, and Qiangtang terranes, experienced Early Paleozoic magmatism, indicating an Andean-type orogeny that resulted from the subduction of the Proto-Tethys Ocean after the final amalgamation of Gondwana. (5) The Lhasa and Qiangtang terranes witnessed Middle Paleozoic (~ 360 Ma) magmatism, suggesting an Andean-type orogeny derived from the subduction of the Paleo-Tethys Ocean. (6) The closure of Paleo-Tethys Ocean between the North and South Lhasa terranes and subsequent terrane collision resulted in the formation of Late Permian (~ 260 Ma) HP metamorphic belt and Triassic (220 Ma) MP metamorphic belt. (7) The South Lhasa terrane experienced Late Cretaceous (~ 90 Ma) Andean-type orogeny, characterized by the regional HT/MP metamorphism and coeval intrusion of the voluminous Gangdese batholith during the northward subduction of the Neo-Tethyan Ocean. (8) During the Early Cenozoic (55–45 Ma), the continent–continent collisional orogeny has led to the thickened crust of the South Lhasa terrane experiencing MP amphibolite-facies metamorphism and syn-collisional magmatism. (9) Following the continuous continent convergence, the South Lhasa terrane also experienced MP metamorphism during Late Eocene (40–30 Ma). (10) During Mesozoic and Cenozoic, two different stages of paired metamorphic belts were formed in the oceanic or continental subduction zones and the middle and lower crust of the hanging wall of the subduction zone. The tectonic imprints from the Lhasa terrane provide excellent examples for understanding metamorphic processes and geodynamics at convergent plate boundaries.     

Archaean to Palaeoproterozoic high-grade evolution of the Belomorian eclogite province in the Gridino area,Fennoscandian Shield: Geochronological evidence

The Belomorian eclogite province was repeatedly affected by multiple deformation episodes and metamorphism under moderate to high pressure. Within the Gridino area, high pressure processes developed in a continental crust of tonalite–trondhjemite–granodiorite (TTG) affinity that contains mafic pods and dykes, in which products of these processes are most clearly evident. New petrological, geochemical and geochronological data on mafic and felsic rocks, including PT-estimates, mineral chemistry, bulk rock chemistries, REE composition of the rocks and zircons and U–Pb and Lu–Hf geochronology presented in the paper make it possible to reproduce the magmatic and high-grade metamorphic evolution in the study area. In the framework of the extremely long-lasting geologic history recorded in the Belomorian province (3–1.7 Ga), new geochronological data enabled us to define the succession of events that includes mafic dyke emplacement between 2.87 and 2.82 Ga and eclogite facies metamorphism of the mafic dykes between ~ 2.82 and ~ 2.72 Ga (most probably in the time span of 2.79–2.73 Ga). The clockwise PT path of the Gridino association crosses the granulite- and amphibolite-facies PT fields during the time period of 2.72 Ga to 2.64 Ga. A special aspect of this work concerns the superposed subisobaric heating (thermal impact) with an increase in the temperature to granulite facies conditions at 2.4 Ga. Later amphibolite facies metamorphism occurred at 2.0–1.9 Ga. Our detailed geochronological and petrological studies reveal a complicated Mesoarchaean–Palaeoproterozoic history that involved deep subduction of the continental crust and a succession of plume-related events.     

40Ar/39Ar age pattern associated with differential uplift along the Eastern Highlands shear zone,Cape Breton Island,Canadian Appalachians

The Eastern Highlands shear zone in Cape Breton Island is a crustal scale thrust. It is characterized by an amphibolite-facies deformation zone ∼5 km wide formed deep in the crust that is overprinted by a greenschist-facies mylonite zone ∼1 km wide that formed at a more shallow level. Hornblende ⁴⁰Ar/³⁹Ar plateau ages on the hanging wall decrease towards the centre of the shear zone. In the older zone (over 7.8 km from the centre), the ages are between ∼565 and ∼545 Ma; in the younger zone (within 4.5 km of the centre), they are between ∼425 and ∼415 Ma; and in the transitional zone in between, they decrease abruptly from ∼545 to ∼425 Ma. Pressures of crystallization of plutons in the hanging wall, based on the Al-in-hornblende barometer and corresponding to depth of emplacement, increase towards the centre of the shear zone and indicate a differential uplift of up to ∼28 km associated with movement along the shear zone. The age pattern is interpreted to have resulted from the differential uplift. The pressure data show that rocks exposed in the younger zone were buried deep in the crust and did not cool through the hornblende Ar blocking temperature (∼500°C) until differential uplift occurred. The ⁴⁰Ar/³⁹Ar ages in the zone (∼425–415 Ma) thus date shear zone movement or the last stage of it. In contrast, rocks in the older zone were more shallowly buried before differential uplift and cooled through the blocking temperature soon after the emplacement of ∼565–555 Ma plutons in the area, long before shear zone movement. The transitional zone corresponds to the Ar partial retention zone before differential uplift. The ⁴⁰Ar/³⁹Ar age pattern thus reflects a Neoproterozoic to Silurian cooling profile that was exposed as a result of differential uplift related to movement along the shear zone. A similar K–Ar age pattern has been reported for the Alpine fault in New Zealand. It is suggested that such isotopic age patterns can be used to help constrain the ages, kinematics, displacements and depth of penetration of shear zones.     

Tectonic evolution of the Satpura Mountain Belt: A critical evaluation and implication on supercontinent assembly

The Satpura Mountain Belt (also referred as Central Indian Tectonic Zone in recent literature) forms an important morphotectonic unit in the central part of India. Some of the recent workers have reported an orogenic event at ∼1000–900 Ma (termed “Sausar orogeny”) which led to amalgamation of the North Indian Block and the South Indian Block and formation of the Satpura Mountain Belt. In this model the stratigraphic relations of two important lithostratigraphic units on either side of the Satpura Mountain Belt (the Sausar Group in the south and the Vindhyan Supergroup on the north) are suggested to be revised from previously held ideas. Critical analyses of available published work in the region to assess the status of the Sausar Group vis a vis the Vindhyan Supergroup was carried out. It is found that the ideas proposed by the recent workers stem from an earlier interpretation that the Sausar Group has monocyclic evolution and the earliest fabric in the Sausar Group is marked by a schistosity with EW strike. Re-mapping of the gneissic rocks and adjacent matasedimentary rocks of Khawasa, Deolapar, and Kandri–Mansar areas revealed presence of gneissic rocks and granulites of two generations, and of four phases of superposed deformations in the metasediments and gneisses. The older gneisses and granulites constitute the basement over which the rocks of the Sausar Group were deposited; and the younger gneisses developed by metamorphism and migmatisation of the rocks of the Sausar Group. The latter types are found in the Khawasa–Ramakona areas. Contrary to the belief of the recent workers that no volcanic activity is present in the Sausar Group, volcanic rocks marked by amygdular basic flows and tuffs have been mapped from different parts of the Sausar Group. Migmatisation and metamorphism of these volcanic rocks (of the Sausar Group) have given rise to amphibolites and granulites in Khawasa and Ramakona areas. Therefore, the use of fabric patterns in these areas to suggest that the granulite facies metamorphism in the Ramakona–Katangi granulite domain was pre-Sausar in age is debatable.Available geochronological data of the Satpura Mountain Belt and its eastward continuation into the Chhotanagpur Gneiss terrain indicate that the basement and cover rocks of these areas were subjected to multiple deformation and metamorphic episodes of similar style and nature. The earliest deformation and metamorphism of the rocks of the Sausar Group and its equivalent rocks to the east took place at ∼2100–1900 Ma. The regional EW trend of the belt developed during the second deformation at ∼1800–1700 Ma and again at ∼1600–1500 Ma. This deformation was accompanied by migmatisation and granulite facies metamorphism in the northern domain of the Sausar Belt and in the Chhotanagpur Gneiss region. Late phase low intensity deformations in the region were associated with thermal events at ∼1100–1000 Ma and ∼900–800 Ma.The ∼EW trending fabric, referred as “Satpura orogenic trend” in Indian literature marks a major compressional tectonic event, developed during the second deformation of the Sausar Group. This has its counter part in Western Australia as the Capricorn orogeny (∼1780–1830 Ma). The development of the Satpura Mountain Belt during the Grenvillian orogeny is ruled out from the synthesis of event stratigraphic data of the region and from its comparison with the Western Australian Craton.     

Monazite stability,composition and geochronology as tracers of Paleoproterozoic events at the eastern margin of the East European Craton (Taratash complex,Middle Urals)

The Precambrian Taratash complex (Middle Urals) is one of the rare windows into the Palaeoproterozoic and earlier history of the eastern margin of the East European Craton. Monazite from intensively deformed rocks within a major amphibolite-facies shear zone in the Taratash complex has been investigated by means of electron-probe microanalysis and laser-ablation SF-ICP-MS.Metamorphic and magmatic cores of monazite from metasedimentary and metagranitoid rocks yield U–Pb ages of 2244 ± 19 and 2230 ± 22 Ma (± 2 σ) and record a previously unknown pre-deformational HT-metamorphic event in the Taratash complex. Subsequent dissolution–reprecipitation of monazite, during shear zone formation under amphibolite-facies conditions, caused patchy zonation and chemical alteration of the recrystallised monazite domains, leading to higher cheralite and huttonite components. This process, which was mediated by a probable (alkali + OH)-bearing metamorphic fluid also caused a total resetting of the U–Pb-system. The patchy domains yield concordant U–Pb-ages between 2052 ± 16 and 2066 ± 22 Ma, interpreted as the age of the shear zone. In line with previously published ages of high grade metamorphism and migmatisation, the data may point to a Palaeoproterozoic orogenic event at the eastern margin of the East European Craton.Post-deformational fluid-induced greenschist-facies retrogression caused partial to complete breakdown of monazite to fluorapatite, REE + Y-rich epidote, allanite and Th-orthosilicate.The retrograde assemblages either form coronas around monazite, or occur as dispersed reaction zones, indicating that the REE, Y, and Th were mobile at least on the thin section scale. The greenschist-facies metamorphic fluid was aqueous and rich in Ca. Monazite affected by advanced breakdown responded to the retrogression by incorporating the cheralite or huttonite components during a fluid-induced dissolution–reprecipitation process. This event did not reset the U–Pb-system but caused partial Pb loss reflected by discordant U–Pb-dates.     

Magnetic fabrics of the Douglas Till of the Superior lobe: exploring bed-deformation kinematics

The Superior lobe of the Laurentide ice sheet, during its last advance into northwestern Wisconsin, may have moved and transported sediment primarily through deep, widespread shear of its bed to high strains (>100). To study the kinematics of this deformation, we measured the anisotropy of magnetic susceptibility of 3750 intact samples of its basal till—the Douglas member of the Miller Creek formation—collected from eight profiles at 0.2 m depth increments. A benchmark for interpretations was provided by results of ring-shear experiments conducted on the Douglas Till, which provided fabric characteristics for the case of horizontal simple shear. Orientations of maximum susceptibility (k₁) were controlled by preferred orientations of silt-sized magnetite grains and were similar to sand-grain orientations measured in thin sections. Strengths of fabrics formed by orientations of k₁ indicate that most of the till sampled was deformed but to variable strains. Deformation averaged over the 20 km spanned by the study approximated horizontal simple shear. However, large differences in k₁ fabric azimuths (>45°) over lateral distances of meters to tens of meters indicate highly heterogeneous bed deformation, perhaps focused in anastomosing zones with associated divergent and convergent till shear. This interpretation is supported by orientations of principal susceptibilities that imply, in many cases, either that shear planes were steeply dipping, particularly transverse to the shearing direction, or that there were major components of pure shear. Variations in k₁ fabric azimuth with depth indicate that most of the till thickness did not shear simultaneously; rather, till accumulated at the bed as shear direction changed in response to temporally shifting zones of shallow deformation (<1 m). This heterogeneous, temporally variable deformation of the bed differs from many applications of the bed-deformation model but is consistent with subglacial measurements at modern glaciers.     

Upper Neogene stratigraphy and tectonics of Death Valley — a review

New tephrochronologic, soil-stratigraphic and radiometric-dating studies over the last 10 years have generated a robust numerical stratigraphy for Upper Neogene sedimentary deposits throughout Death Valley. Critical to this improved stratigraphy are correlated or radiometrically-dated tephra beds and tuffs that range in age from > 3.58 Ma to < 1.1 ka. These tephra beds and tuffs establish relations among the Upper Pliocene to Middle Pleistocene sedimentary deposits at Furnace Creek basin, Nova basin, Ubehebe–Lake Rogers basin, Copper Canyon, Artists Drive, Kit Fox Hills, and Confidence Hills. New geologic formations have been described in the Confidence Hills and at Mormon Point. This new geochronology also establishes maximum and minimum ages for Quaternary alluvial fans and Lake Manly deposits. Facies associated with the tephra beds show that ∼3.3 Ma the Furnace Creek basin was a northwest–southeast-trending lake flanked by alluvial fans. This paleolake extended from the Furnace Creek to Ubehebe. Based on the new stratigraphy, the Death Valley fault system can be divided into four main fault zones: the dextral, Quaternary-age Northern Death Valley fault zone; the dextral, pre-Quaternary Furnace Creek fault zone; the oblique–normal Black Mountains fault zone; and the dextral Southern Death Valley fault zone. Post − 3.3 Ma geometric, structural, and kinematic changes in the Black Mountains and Towne Pass fault zones led to the break up of Furnace Creek basin and uplift of the Copper Canyon and Nova basins. Internal kinematics of northern Death Valley are interpreted as either rotation of blocks or normal slip along the northeast–southwest-trending Towne Pass and Tin Mountain fault zones within the Eastern California shear zone.     

Subduction-related metasomatic mantle source in the eastern Central Asian Orogenic Belt: Evidence from amphibolites in the Xilingol Complex,Inner Mongolia,China

The Central Asian Orogenic Belt (CAOB) formed mainly in the Paleozoic due to the closure of the Paleo-Asian oceanic basins and accompanying prolonged accretion of pelagic sediments, oceanic crust, magmatic arcs, and Precambrian terranes. The timing of subduction–accretion processes and closure of the Paleo-Asian Ocean has long been controversial and is addressed in a geochemical and isotopic investigation of mafic rocks, which can yield important insight into the geodynamics of subduction zone environments. The Xilingol Complex, located on the northern subduction–accretion zone of the CAOB, mainly comprises strongly deformed quartzo-feldspathic gneisses with intercalated lenticular or quasi-lamellar amphibolite bodies. An integrated study of the petrology, geochemistry, and geochronology of a suite of amphibolites from the complex constrains the nature of the mantle source and the tectono-metamorphic events in the belt. The protoliths of these amphibolites are gabbros and gabbroic diorites that intruded at ca. 340–321 Ma with positive εHf_(t) values ranging from + 2.89 to + 12.98. Their T_DM1 model ages range from 455 to 855 Ma and peak at 617 Ma, suggesting that these mafic rocks are derived from a depleted continental lithospheric mantle. The primitive magma was generated by variable degrees of partial melting of spinel-bearing peridotites. Fractionation of olivine, clinopyroxene and hornblende has played a dominant role during magma differentiation with little or no crustal contamination. The mafic rocks are derived from a Late Neoproterozoic depleted mantle source that was subsequently enriched by melts affected by slab-derived fluids and sediments, or melts with a sedimentary source rock. The Carboniferous mafic rocks in the northern accretionary zone of the CAOB record a regional extensional event after the Early Paleozoic subduction of the Paleo-Asian Ocean. Both addition of mantle-derived magmas and recycling of oceanic crust played key roles in significant Late Carboniferous (ca. 340–309 Ma) vertical crustal growth in the CAOB. Amphibolite–facies metamorphism (P = 0.34–0.52 GPa, T = 675–708 °C) affected these mafic rocks in the Xilingol Complex at ca. 306–296 Ma, which may be related to the crustal thickening by northward subduction of a forearc oceanic crust beneath the southern margin of the South Mongolian microcontinent. The final formation of the Solonker zone may have lasted until ca. 228 Ma.     

Geochronological and mineralogical constraints on mineralization of the Hetai goldfield in Guangdong Province,South China

The Hetai goldfield, located in the southern segment of the Qinzhou Bay-Hangzhou Bay Juncture Orogenic Belt (QHJB), is the largest concentration of gold deposits in Guangdong Province, South China. The gold mineralization is hosted within the late Neoproterozoic to early Paleozoic Yunkai Group and strictly confined to mylonite (ductile shear) zones. The nature of the structural control of mineralization, in particular the role of ductile versus brittle deformation and their ages, which remain unclear despite numerous previous studies, are examined in this paper through an integrated study of geochronology and mineralogy.Lamellar and filament structures shown by pyrite and pyrrhotite in the ores suggest that sulfidation took place during ductile deformation and syntectonic metamorphism, but the majority of the ores are associated with brittle deformation features. In combination with macroscopic and microscopy observations on shear fabrics, LA-ICP-MS U-Pb dating on zircons of hydrothermal origin from mylonites suggests that the Hetai goldfield was subjected to two shearing events: an early sinistral ductile shearing at ca. 240 Ma, and a late dextral ductile-brittle shearing at ca. 204 Ma (Indosinian). These ages are ca. 90–30 Ma older than the previously published gold mineralizing ages of ca. 175–152 Ma (Yanshanian), suggesting that the main gold mineralization and related brittle deformation significantly postdate the ductile deformation. This inference is supported by the mineralization temperatures estimated from geothermometers of arsenopyrite (ca. 350–290 °C), chlorite (ca. 260–230 °C), and sphalerite (ca. 230–170 °C) intergrown with native gold, which are considerably lower than that for the ductile deformation (500–300 °C or higher). Based on these data, we propose that the gold mineralization in the Hetai goldfield predominantly occurred during the Yanshanian event, and only minor gold mineralization and associated sulfidation took place during the earlier Indosinian ductile deformation.     

Recognition of Yanshanian magmatic-hydrothermal gold and polymetallic gold mineralization in the Laowan gold metallogenic belt,Tongbai Mountains: New evidence from structural controls,geochronology and geochemistry

The Laowan metallogenic belt in China is an important metallogenic belt within the Tongbai orogenic belt, and contains the medium-sized Laowan and Shangshanghe gold deposits, the small Huangzhuyuan lead–zinc–silver–gold deposit and some gold and Cu–Pb occurrences. These deposits are hosted in Mesoproterozoic plagioclase amphibolite (or schist) and mica-quartz schist. The gold ores are mainly quartz veins and veinlets and disseminated altered ores. Subordinate ore types include massive sulfides and breccias. The Laowan gold deposit is characterized by three right-stepping en-echelon fracture-controlled alteration zones that dip gently to the south and includes disseminated, sheeted and stockwork ores. These lodes were formed by the interaction of ore-forming fluid with foliated-to laminated cataclasite within the transpressional faults. The Shangshanghe gold deposit is characterized by parallel ore lodes that dip steeply to the north, and includes quartz veins and breccias in addition to ores in altered wallrocks. These lodes were formed by focusing of fluids into transtensional faults. These ore controlling faults displaced early barren quartz veins 10 m horizontally with a dextral sense of motion. The ore-hosting structures at the Laowan and Shangshanghe deposits correspond to the P and R-type shears of a brittle dextral strike-slip fault system, respectively, which make angles of about 15° and − 15° to the Laowan and Songpa boundary faults. The ore-controlling fault system post-dated formation of a ductile shear zone, and peak regional metamorphism. This precludes a genetic relationship between hydrothermal mineralization and regional metamorphism and ductile shear deformation. These gold deposits are not typical orogenic gold deposits. The metallogenic belt displays district-scale-zoning of Mo → Cu–Pb–Zn–Ag → Au relative to Songpa granite porphyry dike zone, suggesting the mineralization may be closely related to the granite porphyry. Measured δ³⁴S of sulfides and δ¹⁸O and δD of fluid inclusion waters in auriferous quartz also are consistent with a magmatic source for sulfur and ore fluids. The similarity of Pb isotope ratios between the ores and Yanshanian granitoids suggests a similar source. As the age (139 ± 3 Ma) of granite porphyry obtained by zircon U–Pb isotope overlaps the mineralization age (138 ± 1 Ma: Zhang et al., 2008a), the gold and polymetallic metallogenesis of the Laowan gold belt has close spatial, temporal and possibly genetic relationships with Yanshanian high level magmatism.